component
STM6601BS2BDM6F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, TDFN-12(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+49@@ -0,0 +1,49 @@+# STM6601BS2BDM6F++**STMicroelectronics** · Supervisor And Reset ICs · TDFN-12(2x3)++STM6601BS2BDM6F from STMicroelectronics, in a TDFN-12(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCC | power_in | Power supply input operating at 1.6 V to 5.5 V, requires 0.1 µF decoupling capacitor placed as close to device as possible. |+| 2 | SR | input | Smart Reset™ button input with factory-trimmed voltage detector and ±8 kV HBM ESD protection, active low with optional internal 100 kΩ pull-up resistor. |+| 3 | VREF | power_in | Precise 1.5 V voltage reference output with 1% accuracy, requires mandatory 1 µF capacitor, output enabled after RST deasserts and disabled in standby mode. |+| 4 | PSHOLD | input | Power-supply hold input with factory-trimmed voltage detector and internal pull-down during startup, confirms correct power-up or initiates shutdown. |+| 5 | CSRD | passive | Smart Reset™ delay time capacitor input charged with ISRD current to set additional delay tSRD, leave pin open if capacitor not used. |+| 6 | PB | input | Push-button power-on input with factory-trimmed voltage detector and ±8 kV HBM ESD protection, active low with internal 100 kΩ pull-up resistor and switch to ground. |+| 7 | VCCLO | output | Active low open-drain output indicating VCC above VTH+ threshold or undervoltage detection, requires pull-up resistor, floating in standby mode. |+| 8 | PBOUT | output | Active low open-drain output indicating PB push-button input status with tDEBOUNCE response time, requires pull-up resistor. |+| 9 | EN | output | Push-pull enable output (active low variant) controlling system power, asserted low after valid turn-on confirmation and released high on power-down conditions. |+| 10 | RST | output | Active low open-drain reset output asserted for tREC (240 ms minimum) during startup or after long push detection, requires pull-up resistor. |+| 11 | INT | output | Active low open-drain interrupt output asserted for minimum tINT_Min during push-button interrupt or undervoltage detection in normal operation, requires pull-up resistor. |+| 12 | GND | power_in | Ground reference pin. |+| 13 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TDFN-12(2x3) |+| Category | Power Management (PMIC) |+| Pins | 13 |++## CAD (KiCad official)++- Symbol: `STM6601BS2BDM6F`+- Footprint: `Package_DFN_QFN:DFN-12-1EP_2x3mm_P0.45mm_EP0.64x2.4mm`+- 3D model: TDFN-12(2x3) (KiCad packages3D, STEP)+- 3D model files: `stm6601bs2bdm6f-etched.step` / `stm6601bs2bdm6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm6601bs2bdm6f.step` / `stm6601bs2bdm6f.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939278664028160) (52 pp, sha256 `24305a688f436ae9`, retrieved 2026-10-03, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm6601bs2bdm6f-datasheet.pdf)
page.jsonadded+191@@ -0,0 +1,191 @@+{+ "slug": "stm6601bs2bdm6f",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Supervisor And Reset ICs, TDFN-12(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "stm6601bs2bdm6f",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm6601bs2bdm6f.kicad_sym",+ "stm6601bs2bdm6f.kicad_mod",+ "stm6601bs2bdm6f.glb",+ "stm6601bs2bdm6f.step",+ "stm6601bs2bdm6f.lbr",+ "docs/hero.png",+ "docs/stm6601bs2bdm6f-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm6601bs2bdm6f-hero.glb",+ "stm6601bs2bdm6f-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM6601BS2BDM6F",+ "manufacturer": "STMicroelectronics",+ "package": "TDFN-12(2x3)",+ "pin_count": 13,+ "category": "Power Management (PMIC)",+ "subcategory": "Supervisor And Reset ICs",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939278664028160",+ "parts": {+ "symbol": "stm6601bs2bdm6f.kicad_sym",+ "footprint": "stm6601bs2bdm6f.kicad_mod",+ "model_3d": "stm6601bs2bdm6f-hero.glb",+ "model_3d_plain": "stm6601bs2bdm6f.glb",+ "model_3d_step": "stm6601bs2bdm6f-etched.step",+ "model_3d_step_plain": "stm6601bs2bdm6f.step",+ "lbr": "stm6601bs2bdm6f.lbr"+ },+ "distributor_links": {+ "lcsc": 2067183,+ "digikey": "497-10131-2-ND",+ "mouser": "511-STM6601BS2BDM6F"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T05:24:18Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-10131-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-STM6601BS2BDM6F",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC",+ "type": "power_in",+ "description": "Power supply input operating at 1.6 V to 5.5 V, requires 0.1 µF decoupling capacitor placed as close to device as possible."+ },+ {+ "number": "2",+ "name": "SR",+ "type": "input",+ "description": "Smart Reset™ button input with factory-trimmed voltage detector and ±8 kV HBM ESD protection, active low with optional internal 100 kΩ pull-up resistor."+ },+ {+ "number": "3",+ "name": "VREF",+ "type": "power_in",+ "description": "Precise 1.5 V voltage reference output with 1% accuracy, requires mandatory 1 µF capacitor, output enabled after RST deasserts and disabled in standby mode."+ },+ {+ "number": "4",+ "name": "PSHOLD",+ "type": "input",+ "description": "Power-supply hold input with factory-trimmed voltage detector and internal pull-down during startup, confirms correct power-up or initiates shutdown."+ },+ {+ "number": "5",+ "name": "CSRD",+ "type": "passive",+ "description": "Smart Reset™ delay time capacitor input charged with ISRD current to set additional delay tSRD, leave pin open if capacitor not used."+ },+ {+ "number": "6",+ "name": "PB",+ "type": "input",+ "description": "Push-button power-on input with factory-trimmed voltage detector and ±8 kV HBM ESD protection, active low with internal 100 kΩ pull-up resistor and switch to ground."+ },+ {+ "number": "7",+ "name": "VCCLO",+ "type": "output",+ "description": "Active low open-drain output indicating VCC above VTH+ threshold or undervoltage detection, requires pull-up resistor, floating in standby mode."+ },+ {+ "number": "8",+ "name": "PBOUT",+ "type": "output",+ "description": "Active low open-drain output indicating PB push-button input status with tDEBOUNCE response time, requires pull-up resistor."+ },+ {+ "number": "9",+ "name": "EN",+ "type": "output",+ "description": "Push-pull enable output (active low variant) controlling system power, asserted low after valid turn-on confirmation and released high on power-down conditions."+ },+ {+ "number": "10",+ "name": "RST",+ "type": "output",+ "description": "Active low open-drain reset output asserted for tREC (240 ms minimum) during startup or after long push detection, requires pull-up resistor."+ },+ {+ "number": "11",+ "name": "INT",+ "type": "output",+ "description": "Active low open-drain interrupt output asserted for minimum tINT_Min during push-button interrupt or undervoltage detection in normal operation, requires pull-up resistor."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference pin."+ },+ {+ "number": "13",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 13 added from the footprint",+ "2/13 pins cited to the wrong page (name found elsewhere): ['4:PSHOLD@p10', '6:PB@p11']"+ ],+ "pages_sent": 23,+ "cost_usd": 0.1937,+ "at": "2026-10-03T05:23:54"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939278664028160",+ "pages": 52,+ "sha256": "24305a688f436ae9",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 13,+ "described": 13,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}