← Commit history

Set visibility: public

Ray ·0ca4fcd627 · ·parent 8874117
1 file changed +7−4
page.json+7−4
@@ -38,7 +38,7 @@         "number": "1",         "name": "RST",         "type": "output",-        "description": "Active-low, open-drain reset output for STM6321; pulses low when triggered and stays low whenever VCC is below the reset threshold, remaining low for trec after VCC rises above the reset threshold or a watchdog timeout occurs; requires an external pull-up resistor (e.g. 10 k\u03a9) to a supply up to 6 V."+        "description": "Active-low, open-drain reset output for STM6321; pulses low when triggered and stays low whenever VCC is below the reset threshold, remaining low for trec after VCC rises above the reset threshold or a watchdog timeout occurs; requires an external pull-up resistor (e.g. 10 kΩ) to a supply up to 6 V."       },       {         "number": "2",@@ -56,13 +56,13 @@         "number": "4",         "name": "WDI",         "type": "input",-        "description": "Watchdog input; if WDI is held high or low for at least tWD = 1.6 s (typ.) the watchdog timer expires and RST is asserted, the timer is cleared by a reset or by any rising/falling edge on WDI (edges as short as 50 ns are detected), and the watchdog can be disabled by leaving WDI floating or driving it from a tri-state buffer (max. 10 \u00b5A leakage, 200 pF load)."+        "description": "Watchdog input; if WDI is held high or low for at least tWD = 1.6 s (typ.) the watchdog timer expires and RST is asserted, the timer is cleared by a reset or by any rising/falling edge on WDI (edges as short as 50 ns are detected), and the watchdog can be disabled by leaving WDI floating or driving it from a tri-state buffer (max. 10 µA leakage, 200 pF load)."       },       {         "number": "5",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage input monitored by the precision comparator for the reset threshold; operating range 1.0 to 5.5 V per the DC/AC operating conditions, with typical quiescent supply current of a few \u00b5A."+        "description": "Supply voltage input monitored by the precision comparator for the reset threshold; operating range 1.0 to 5.5 V per the DC/AC operating conditions, with typical quiescent supply current of a few µA."       }     ],     "provenance": {@@ -140,5 +140,8 @@     "docs/stm6321twy6f-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file