component
STM6315RDW13F
Public Made by Adomby adom
STMicroelectronics Supervisor and Reset ICs, SOT-143. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,25 +32,25 @@ "number": "1", "name": "VSS", "type": "power_in",- "description": "Ground reference for the device. Connect to the system ground plane; a 0.1 \u00b5F bypass capacitor on VCC referenced to VSS is recommended for transient immunity."+ "description": "Ground reference for the device. Connect to the system ground plane; a 0.1 µF bypass capacitor on VCC referenced to VSS is recommended for transient immunity." }, { "number": "2", "name": "RST", "type": "output",- "description": "Active-low, open-drain reset output. Requires an external pull-up (10 k\u03a9 typical) to any supply up to 6 V, and may be pulled above VCC. Asserts low whenever VCC is below the reset threshold or MR is low, and remains low for the reset time-out period (trec) after the condition clears. Guaranteed valid down to VCC = 1.0 V."+ "description": "Active-low, open-drain reset output. Requires an external pull-up (10 kΩ typical) to any supply up to 6 V, and may be pulled above VCC. Asserts low whenever VCC is below the reset threshold or MR is low, and remains low for the reset time-out period (trec) after the condition clears. Guaranteed valid down to VCC = 1.0 V." }, { "number": "3", "name": "MR", "type": "input",- "description": "Active-low manual reset input. Asserts RST while held low and for trec after release. Has an internal ~63 k\u03a9 pull-up so it may be left open if unused. Accepts TTL/CMOS logic or open-drain drive; a simple pushbutton to VSS provides a debounced manual reset without external components."+ "description": "Active-low manual reset input. Asserts RST while held low and for trec after release. Has an internal ~63 kΩ pull-up so it may be left open if unused. Accepts TTL/CMOS logic or open-drain drive; a simple pushbutton to VSS provides a debounced manual reset without external components." }, { "number": "4", "name": "VCC", "type": "power_in",- "description": "Positive supply input, monitored against the factory-trimmed reset threshold (2.63/2.93/3.08/4.38/4.63 V depending on ordering suffix). Typical ICC \u2248 1.5 \u00b5A. Decouple with a 0.1 \u00b5F capacitor as close to the pin as possible."+ "description": "Positive supply input, monitored against the factory-trimmed reset threshold (2.63/2.93/3.08/4.38/4.63 V depending on ordering suffix). Typical ICC ≈ 1.5 µA. Decouple with a 0.1 µF capacitor as close to the pin as possible." } ], "provenance": {@@ -136,5 +136,8 @@ "docs/stm6315rdw13f-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }