Generated by kicad-footprint-generator · KiCad file format 20260206
STM32WLE5CCU6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)
STM32WLE5CCU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB3 | bidirectional | FT_a I/O with JTDO/TRACESWO, TIM2_CH2, SPI1_SCK, RF_IRQ0, USART1_RTS alternate functions and COMP1_INM, COMP2_INM, ADC_IN2, TAMP_IN3/WKUP3 additional functions. |
| 2 | PB4 | bidirectional | FT_fa I/O with NJTRST, I2C3_SDA, SPI1_MISO, USART1_CTS, TIM17_BKIN alternate functions and COMP1_INP, COMP2_INP, ADC_IN3 additional functions. |
| 3 | PB5 | bidirectional | FT_a I/O with LPTIM1_IN1, I2C1_SMBA, SPI1_MOSI, RF_IRQ1, USART1_CK, COMP2_OUT, TIM16_BKIN alternate functions. |
| 4 | PB6 | bidirectional | FT_f I/O with LPTIM1_ETR, I2C1_SCL, USART1_TX, TIM16_CH1N alternate functions. |
| 5 | PB7 | bidirectional | FT_f I/O with LPTIM1_IN2, TIM1_BKIN, I2C1_SDA, USART1_RX, TIM17_CH1N alternate functions. |
| 6 | PB8 | bidirectional | FT_f I/O with TIM1_CH2N, I2C1_SCL, RF_IRQ2, TIM16_CH1 alternate functions. |
| 7 | PA0 | bidirectional | FT_a I/O with TIM2_CH1, I2C3_SMBA, I2S_CKIN, USART2_CTS, COMP1_OUT, TIM2_ETR alternate functions and TAMP_IN2/WKUP1 additional function. |
| 8 | PA1 | bidirectional | FT_a I/O with TIM2_CH2, LPTIM3_OUT, I2C1_SMBA, SPI1_SCK, USART2_RTS, LPUART1_RTS alternate functions. |
| 9 | PA2 | bidirectional | FT_a I/O with LSCO, TIM2_CH3, USART2_TX, LPUART1_TX, COMP2_OUT alternate functions and LSCO additional function. |
| 10 | PA3 | bidirectional | FT_a I/O with TIM2_CH4, I2S2_MCK, USART2_RX, LPUART1_RX alternate functions. |
| 11 | VDD | power_in | Digital supply pin; standard operating voltage 1.8 V to 3.6 V. |
| 12 | PA4 | bidirectional | FT I/O with RTC_OUT2, LPTIM1_OUT, SPI1_NSS, USART2_CK, LPTIM2_OUT alternate functions. |
| 13 | PA5 | bidirectional | FT I/O with TIM2_CH1, TIM2_ETR, SPI2_MISO, SPI1_SCK, LPTIM2_ETR alternate functions. |
| 14 | PA6 | bidirectional | FT I/O with TIM1_BKIN, I2C2_SMBA, SPI1_MISO, LPUART1_CTS, TIM16_CH1 alternate functions. |
| 15 | PA7 | bidirectional | FT_fa I/O with TIM1_CH1N, I2C3_SCL, SPI1_MOSI, COMP2_OUT, TIM17_CH1 alternate functions. |
| 16 | PA8 | bidirectional | FT_a I/O with MCO, TIM1_CH1, SPI2_SCK/I2S2_CK, USART1_CK, LPTIM2_OUT alternate functions. |
| 17 | PA9 | bidirectional | FT_fa I/O with TIM1_CH2, SPI2_NSS/I2S2_WS, I2C1_SCL, SPI2_SCK/I2S2_CK, USART1_TX alternate functions. |
| 18 | NRST | bidirectional | FT I/O device reset pin. |
| 19 | PH3-BOOT0 | bidirectional | FT I/O that also serves as the BOOT0 additional function. |
| 20 | RFI_P | input | Sub-GHz radio RF differential input (positive); maximum RF input power in RX mode is 0 dBm. |
| 21 | RFI_N | input | Sub-GHz radio RF differential input (negative); maximum RF input power in RX mode is 0 dBm. |
| 22 | RFO_LP | output | Sub-GHz radio low-power RF output (up to +15 dBm); VSWR 10:1 operating range. |
| 23 | RFO_HP | output | Sub-GHz radio high-power RF output (up to +22 dBm); VSWR 10:1 operating range. |
| 24 | VR_PA | power_out | Supply pin for the radio power-amplifier regulator output; VSWR 10:1 operating range. |
| 25 | VDDPA | power_in | Power amplifier supply, equal to VDDRF1V55 or VDDSMPS. |
| 26 | OSC_IN | input | RF-type input for the 32 MHz (HSE32) oscillator. |
| 27 | OSC_OUT | output | RF-type output for the 32 MHz (HSE32) oscillator. |
| 28 | VDDRF | power_in | Radio supply; minimum RF voltage 1.8 V, maximum 3.6 V. |
| 29 | VDDRF1V55 | power_out | Radio 1.55 V internal LDO supply pin requiring external decoupling. |
| 30 | PB0-VDD_TCXO | bidirectional | TT I/O with COMP1_OUT alternate function; also the VDD_TCXO supply pin. |
| 31 | PB2 | bidirectional | FT_a I/O with LPTIM1_OUT, I2C3_SMBA, SPI1_NSS alternate functions and COMP1_INP, COMP2_INM, ADC_IN4 additional functions. |
| 32 | PB12 | bidirectional | FT I/O with TIM1_BKIN, I2C3_SMBA, SPI2_NSS/I2S2_WS, LPUART1_RTS alternate functions. |
| 33 | PA10 | bidirectional | FT_fa I/O with RTC_REFIN, TIM1_CH3, I2C1_SDA, SPI2_MOSI/I2S2_SD, USART1_RX, TIM17_BKIN alternate functions and COMP1_INM, COMP2_INM, DAC_OUT1, ADC_IN6 additional functions. |
| 34 | PA11 | bidirectional | FT_fa I/O with TIM1_CH4, TIM1_BKIN2, LPTIM3_ETR, I2C2_SDA, SPI1_MISO, USART1_CTS alternate functions and COMP1_INM, COMP2_INM, ADC_IN7 additional functions. |
| 35 | PA12 | bidirectional | FT_fa I/O with TIM1_ETR, LPTIM3_IN1, I2C2_SCL, SPI1_MOSI, RF_BUSY, USART1_RTS alternate functions and ADC_IN8. |
| 36 | PA13 | bidirectional | FT_a I/O with JTMS-SWDIO, I2C2_SMBA, IR_OUT alternate functions and ADC_IN9. |
| 37 | VBAT | power_in | Backup supply for RTC, LSE and backup registers; operating range 1.55 V to 3.6 V. |
| 38 | PC13 | bidirectional | FT I/O with TAMP_IN1/RTC_OUT1/RTC_TS/WKUP2 additional functions. |
| 39 | PC14-OSC32_IN | bidirectional | FT I/O that also serves as the OSC32_IN low-speed crystal input. |
| 40 | PC15-OSC32_OUT | bidirectional | FT I/O that also serves as the OSC32_OUT low-speed crystal output. |
| 41 | VDDA | power_in | Analog supply; 1.62 V min with ADC or COMP, 1.71 V with DAC, 2.4 V with VREFBUF, up to 3.6 V; VREF+ is internally connected to VDDA on this package. |
| 42 | PA14 | bidirectional | FT_a I/O with JTCK-SWCLK, LPTIM1_OUT, I2C1_SMBA alternate functions and ADC_IN10. |
| 43 | PA15 | bidirectional | FT_fa I/O with JTDI, TIM2_CH1, TIM2_ETR, I2C2_SDA, SPI1_NSS alternate functions and COMP1_INM, COMP2_INP, ADC_IN11. |
| 44 | VDD | power_in | Digital supply pin; standard operating voltage 1.8 V to 3.6 V. |
| 45 | VFBSMPS | power_in | SMPS feedback voltage pin; range 1.4 V to 3.6 V. |
| 46 | VDDSMPS | power_in | SMPS step-down converter supply input. |
| 47 | VLXSMPS | passive | SMPS switching node connected to the external inductor. |
| 48 | VSSSMPS | power_in | SMPS ground pin. |
| 49 | VSS | power_in | Exposed pad that must be connected to VSS (ground). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD, VDDA, VDDRF, VDDSMPS, VBAT, VREF+) | VDDX - VSS | -0.3 | 3.9 | V | 64 | ||
| Input voltage on TT pins | VIN | 3.9 | V | 64 | |||
| Input voltage on any other pin | VIN | 3.9 | V | 64 | |||
| Variation between different VDDX power pins of the same domain | /∆VDDx/ | 50 | mV | 64 | |||
| Variation between all the different ground pins | /VSSx-VSS/ | 50 | mV | 64 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ - VDDA | 0.4 | V | VREF+ > VDDA | 64 | ||
| Total current into sum of all VDD power lines (source) | ∑IVDD | 130 | mA | 65 | |||
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | 130 | mA | 65 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 130 | mA | 65 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 65 | |||
| Output current sunk by any I/O and control pin, except FT_f | IIO(PIN) | 20 | mA | 65 | |||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | 65 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 65 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | 65 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | 65 | |||
| Injected current on FT_xx, TT and RST pins, except PB0 | IINJ(PIN) | -5 | 0 | mA | 65 | ||
| Injected current on PB0 | IINJ(PIN) | -5 | 0 | mA | 65 | ||
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | 65 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 65 | ||
| Maximum junction temperature | TJ | 125 | °C | 65 | |||
| Internal APB1 clock frequency | fPCLK1 | 0 | 48 | MHz | 66 | ||
| Standard operating voltage | VDD | 1.8 | 3.6 | V | 66 | ||
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 66 | |
| Analog supply voltage | VDDA | 1.71 | V | DAC used | 66 | ||
| Analog supply voltage | VDDA | 2.4 | V | VREFBUF used | 66 | ||
| Analog supply voltage | VDDA | 0 | V | ADC, DAC, COMP and VREFBUF not used | 66 | ||
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 66 | ||
| SMPS feedback voltage | VFBSMPS | 1.4 | 3.6 | V | 66 | ||
| Minimum RF voltage | VDDRF | 1.8 | 3.6 | V | 66 | ||
| I/O input voltage | VIN | -0.3 | V | TT I/O | 66 | ||
| Ambient temperature, suffix 6 version | TA | -40 | 85 | °C | Maximum power dissipation | 67 | |
| Ambient temperature, suffix 6 version | TA | 105 | °C | Low-power dissipation | 67 | ||
| Junction temperature range, suffix 6 version | TJ | -40 | 105 | °C | 67 | ||
| RF input power when in RX operation mode | RFI_P/RFI_N | 0 | dBm | RX operation mode | 68 | ||
| Voltage standing wave ratio (VSWR) | VSWR | 10 | - | RFO_LP/RFO_HP/VR_PA; printed as 10:1 | 68 | ||
| Frequency synthesizer range | FR | 150 | 960 | MHz | Low-power PA | 71 | |
| Crystal oscillator trimming range for crystal frequency error compensation | OSC_TRM | -15 | 15 | ppm | Min/max XTAL specifications | 71 | |
| Bitrate, FSK | BR_F | 0.6 | 300 | Kbit/s | Programmable (min modulation index is 0.5) | 71 | |
| Frequency deviation, FSK | FDA | 0.6 | 200 | kHz | Programmable (FDA + BR_F/2 ≤ 250 kHz) | 71 | |
| Bitrate, LoRa | BR_L | 0.018 | 62.5 | Kbit/s | Min for SF12, BW_L = 7.8 kHz; max for SF5, BW_L = 500 kHz | 71 | |
| Signal BW, LoRa | BW_L | 7.8 | 500 | kHz | Programmable | 71 | |
| Maximum tolerated frequency offset between transmitter and receiver | FERR_L | -50 | 50 | ppm | SF12 | 71 | |
| Maximum tolerated frequency offset between transmitter and receiver | FERR_L | -100 | 100 | ppm | SF11 | 71 | |
| Maximum tolerated frequency offset between transmitter and receiver | FERR_L | -200 | 200 | ppm | SF10 | 71 | |
| Brownout reset threshold 0, rising edge | VBOR0 | 1.72 | 1.76 | 1.8 | V | Rising edge | 76 |
| Brownout reset threshold 0, falling edge | VBOR0 | 1.7 | 1.74 | 1.78 | V | Falling edge | 76 |
| Brownout reset threshold 1, rising edge | VBOR1 | 2.06 | 2.1 | 2.14 | V | Rising edge | 76 |
| Brownout reset threshold 1, falling edge | VBOR1 | 1.96 | 2 | 2.04 | V | Falling edge | 76 |
| Brownout reset threshold 2, rising edge | VBOR2 | 2.26 | 2.31 | 2.35 | V | Rising edge | 76 |
| Brownout reset threshold 2, falling edge | VBOR2 | 2.16 | 2.2 | 2.24 | V | Falling edge | 76 |
| Brownout reset threshold 3, rising edge | VBOR3 | 2.56 | 2.61 | 2.66 | V | Rising edge | 76 |
| Brownout reset threshold 3, falling edge | VBOR3 | 2.47 | 2.52 | 2.57 | V | Falling edge | 76 |
| Brownout reset threshold 4, rising edge | VBOR4 | 2.85 | 2.9 | 2.95 | V | Rising edge | 76 |
| Brownout reset threshold 4, falling edge | VBOR4 | 2.76 | 2.81 | 2.86 | V | Falling edge | 76 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TJ < +105 °C | 77 |
| Internal reference voltage spread over the temperature range | ∆VREFINT | 5 | 7.5 | mV | VDD = 3.3 V | 77 | |
| Temperature coefficient | TCoeff | 30 | 50 | ppm/°C | -40 °C < TJ < +105 °C | 77 | |
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 77 | |
| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % VREFINT | 77 |
CAD (KiCad official)
- Symbol:
STM32WLE5CCU6 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32wle5ccu6-etched.step/stm32wle5ccu6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32wle5ccu6.step/stm32wle5ccu6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (147 pp, sha256
ece69527a16e1abe, retrieved 2026-11-10, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).