Generated by kicad-footprint-generator · KiCad file format 20260206
STM32U595RIT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
STM32U595RIT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup domain supply pin for the RTC, backup registers and 2-Kbyte backup SRAM in VBAT mode. |
| 2 | PC13 | bidirectional | FT I/O supplied through the power switch; source current limited to 3 mA shared by PC13 to PC15 and speed limited to 2 MHz with 30 pF load; EVENTOUT, RTC_TS/RTC_OUT1, TAMP_IN1/TAMP_OUT2, WKUP2. |
| 3 | PC14-OSC32_IN | bidirectional | FT_o I/O supplied through the power switch, also OSC32_IN input of the 32.768 kHz low-speed oscillator. |
| 4 | PC15-OSC32_OUT | bidirectional | FT_o I/O supplied through the power switch, also OSC32_OUT output of the 32.768 kHz low-speed oscillator and must not be used as a current source. |
| 5 | PH0-OSC_IN | bidirectional | FT I/O that serves as OSC_IN input of the high-speed external oscillator. |
| 6 | PH1-OSC_OUT | bidirectional | FT I/O that serves as OSC_OUT output of the high-speed external oscillator. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | FT_fha I/O with ADC1_IN1, ADC2_IN1 and ADC4_IN1 analog inputs; LPTIM1_IN1, I2C3_SCL and LPUART1_RX alternate functions. |
| 9 | PC1 | bidirectional | FT_fhav I/O with ADC1_IN2, ADC2_IN2 and ADC4_IN2 analog inputs; TRACED0, LPTIM1_CH1, SPI2_MOSI and LPUART1_TX alternate functions. |
| 10 | PC2 | bidirectional | FT_ha I/O with ADC1_IN3, ADC2_IN3 and ADC4_IN3 analog inputs; LPTIM1_IN2, SPI2_MISO and USART6_RX alternate functions. |
| 11 | PC3 | bidirectional | FT_ha I/O with ADC1_IN4, ADC2_IN4 and ADC4_IN4 analog inputs; LPTIM1_ETR, SPI2_MOSI and USART6_TX alternate functions. |
| 12 | VSSA | power_in | Analog ground pin for the ADC, DAC, OPAMP, COMP and VREFBUF blocks. |
| 13 | VDDA | power_in | Analog supply pin for the ADC, DAC, OPAMP, COMP and VREFBUF blocks. |
| 14 | PA0 | bidirectional | FT_hat I/O with OPAMP1_VINP, ADC1_IN5 and WKUP1 inputs; TIM2_CH1, USART2_CTS, UART4_TX and OCTOSPIM_P2_NCS alternate functions. |
| 15 | PA1 | bidirectional | FT_hat I/O with OPAMP1_VINM, ADC1_IN6 and WKUP3 inputs; LPTIM1_CH2, TIM2_CH2, SPI1_SCK and USART2_RTS_DE alternate functions. |
| 16 | PA2 | bidirectional | FT_ha I/O with COMP1_INP3 and ADC1_IN7 inputs and WKUP4/LSCO; TIM2_CH3, USART2_TX (boot), LPUART1_TX and UCPD1_FRSTX1 alternate functions. |
| 17 | PA3 | bidirectional | TT_hav I/O (3.6 V tolerant) with OPAMP1_VOUT, ADC1_IN8 and WKUP5 functions; TIM2_CH4, USART2_RX (boot) and LPUART1_RX alternate functions. |
| 18 | VSS | power_in | Ground pin of the digital supply domain. |
| 19 | VDD | power_in | Main digital supply pin, 1.71 V to 3.6 V per the general operating conditions. |
| 20 | PA4 | bidirectional | TT_ha I/O with ADC1_IN9, ADC2_IN9, ADC4_IN9, DAC1_OUT1 and WKUP2 functions; SPI1_NSS (boot), SPI3_NSS and USART2_CK alternate functions. |
| 21 | PA5 | bidirectional | TT_a I/O with ADC1_IN10, ADC2_IN10, ADC4_IN10, DAC1_OUT2 and WKUP6 functions; TIM2_CH1, SPI1_SCK (boot) and USART3_RX alternate functions. |
| 22 | PA6 | bidirectional | FT_ha I/O with OPAMP2_VINP, ADC1_IN11, ADC2_IN11, ADC4_IN11 and WKUP7 functions; TIM1_BKIN, TIM3_CH1, SPI1_MISO (boot) and USART3_CTS alternate functions. |
| 23 | PA7 | bidirectional | FT_fha I/O with OPAMP2_VINM, ADC1_IN12, ADC2_IN12, ADC4_IN20 and WKUP8 functions; TIM1_CH1N, TIM3_CH2, SPI1_MOSI (boot) and USART3_TX alternate functions. |
| 24 | PC4 | bidirectional | FT_ha I/O with COMP1_INM2, ADC1_IN13, ADC2_IN13 and ADC4_IN22 inputs; I2C6_SMBA, USART3_TX and OCTOSPIM_P1_IO7 alternate functions. |
| 25 | PC5 | bidirectional | FT_at I/O with COMP1_INP1, ADC1_IN14, ADC2_IN14, ADC4_IN23, WKUP5 and TAMP_IN4 functions; TIM1_CH4N, SAI1_D3, PSSI_D15 and USART3_RX alternate functions. |
| 26 | PB0 | bidirectional | TT_ha I/O with OPAMP2_VOUT, ADC1_IN15, ADC2_IN15 and ADC4_IN18 functions; TIM1_CH2N, TIM3_CH3, SPI1_NSS and USART3_CK alternate functions. |
| 27 | PB1 | bidirectional | FT_ha I/O with COMP1_INM1, ADC1_IN16, ADC2_IN16, ADC4_IN19 and WKUP4 functions; TIM1_CH3N, TIM3_CH4, MDF1_SDI0 and USART3_RTS_DE alternate functions. |
| 28 | PB2 | bidirectional | FT_hat I/O with COMP1_INP2, ADC1_IN17, ADC2_IN17, WKUP1 and RTC_OUT2 functions; LPTIM1_CH1, I2C3_SMBA, SPI1_RDY and OCTOSPIM_P1_DQS alternate functions. |
| 29 | PB10 | bidirectional | FT_fhv I/O with WKUP8; TIM2_CH3, LPTIM3_CH1, I2C4_SCL, I2C2_SCL (boot), SPI2_SCK, USART3_TX and LPUART1_RX alternate functions. |
| 30 | VCAP | passive | Connection to the external decoupling capacitor of the internal core voltage regulator (4.7 µF COUT per the power supply scheme). |
| 31 | VSS | power_in | Ground pin. |
| 32 | VDD | power_in | Main digital supply pin, 1.71 V to 3.6 V per the general operating conditions. |
| 33 | PB12 | bidirectional | FT_hav I/O with TIM1_BKIN, I2C6_SMBA, I2C2_SMBA, SPI2_NSS (boot), MDF1_SDI1, USART3_CK and TSC_G1_IO1 alternate functions. |
| 34 | PB13 | bidirectional | FT_fa I/O with TIM1_CH1N, LPTIM3_IN1, I2C2_SCL, SPI2_SCK (boot), MDF1_CKI1, USART3_CTS and TIM15_CH1N alternate functions. |
| 35 | PB14 | bidirectional | FT_fda I/O with TIM1_CH2N, LPTIM3_ETR, I2C2_SDA, SPI2_MISO (boot), USART3_RTS_DE and SDMMC2_D0 alternate functions; UCPD1_DBCC2 dead battery function. |
| 36 | PB15 | bidirectional | FT_c I/O with RTC_REFIN, TIM1_CH3N, SPI2_MOSI (boot), FMC_NBL1 and SDMMC2_D1 alternate functions; UCPD1_CC2 and WKUP7 functions. |
| 37 | PC6 | bidirectional | FT_a I/O with TIM3_CH1, TIM8_CH1, LCD_R0, SDMMC1_D0DIR, TSC_G4_IO1 and DCMI_D0/PSSI_D0 alternate functions. |
| 38 | PC7 | bidirectional | FT_a I/O with TIM3_CH2, TIM8_CH2, LCD_R1, SDMMC1_D123DIR, TSC_G4_IO2 and DCMI_D1/PSSI_D1 alternate functions. |
| 39 | PC8 | bidirectional | FT_a I/O with TIM3_CH3, TIM8_CH3, USART6_RX, TSC_G4_IO3, DCMI_D2/PSSI_D2 and SDMMC1_D0 alternate functions. |
| 40 | PC9 | bidirectional | FT_a I/O with TRACED0, TIM8_BKIN2, TIM3_CH4, TIM8_CH4, USART6_TX, TSC_G4_IO4 and SDMMC1_D1 alternate functions. |
| 41 | PA8 | bidirectional | FT_hv I/O with MCO, TIM1_CH1, SAI1_CK2, USART1_CK, OTG_HS_SOF, TRACECLK and LPTIM2_CH1 alternate functions. |
| 42 | PA9 | bidirectional | FT_u I/O powered by VDDUSB for USB functionality with OTG_HS_VBUS; TIM1_CH2, SPI2_SCK, DCMI_D0/PSSI_D0, USART1_TX (boot) and SAI1_FS_A alternate functions. |
| 43 | PA10 | bidirectional | FT_u I/O powered by VDDUSB for USB functionality with OTG_HS_ID; TIM1_CH3, LPTIM2_IN2, SAI1_D1, DCMI_D1/PSSI_D1, USART1_RX (boot) and TIM17_BKIN alternate functions. |
| 44 | PA11 | bidirectional | TT I/O with TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS and FDCAN1_RX alternate functions; OTG_HS_DM (boot) USB function. |
| 45 | PA12 | bidirectional | TT I/O with TIM1_ETR, SPI1_MOSI, OCTOSPIM_P2_NCS, USART1_RTS_DE and FDCAN1_TX alternate functions; OTG_HS_DP (boot) USB function. |
| 46 | PA13 | bidirectional | FT I/O that after reset is the JTMS/SWDIO debug pin with internal pull-up; IR_OUT and SAI1_SD_B alternate functions. |
| 47 | VSS | power_in | Ground pin. |
| 48 | VDDUSB | power_in | Supply pin for the USB transceiver domain. |
| 49 | PA14 | bidirectional | FT I/O that after reset is the JTCK/SWCLK debug pin with internal pull-down; LPTIM1_CH1, I2C1_SMBA, I2C4_SMBA and OTG_HS_SOF alternate functions. |
| 50 | PA15 | bidirectional | FT_c I/O that after reset is the JTDI pin with internal pull-up and UCPD1_CC1 dead battery pull-down; TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS and SPI3_NSS alternate functions. |
| 51 | PC10 | bidirectional | FT_a I/O with TRACED1, LPTIM3_ETR, SPI3_SCK, USART3_TX (boot), UART4_TX, TSC_G3_IO2 and DCMI_D8/PSSI_D8 alternate functions. |
| 52 | PC11 | bidirectional | FT_ha I/O with LPTIM3_IN1, ADF1_SDI0, DCMI_D2/PSSI_D2, SPI3_MISO, USART3_RX (boot), UART4_RX and SDMMC1_D3 alternate functions. |
| 53 | PC12 | bidirectional | FT_hav I/O with TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, TSC_G3_IO4, DCMI_D9/PSSI_D9 and SDMMC1_CK alternate functions. |
| 54 | PD2 | bidirectional | FT I/O with TRACED2, TIM3_ETR, I2C5_SMBA, USART3_RTS_DE, UART5_RX, TSC_SYNC and SDMMC1_CMD alternate functions. |
| 55 | PB3 | bidirectional | FT_fa I/O that after reset is the JTDO/TRACESWO pin with TIM2_CH2, LPTIM1_CH1, SPI1_SCK, SPI3_SCK and SDMMC2_D2 alternate functions; COMP2_INM2 input. |
| 56 | PB4 | bidirectional | FT_fa I/O that after reset is the NJTRST pin with TIM3_CH1, LPTIM1_CH2, SPI1_MISO, SPI3_MISO and USART1_CTS alternate functions; COMP2_INP1 input. |
| 57 | PB5 | bidirectional | FT_havc I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI (boot), USART1_CK and COMP2_OUT; WKUP6 and UCPD1_DBCC1 functions. |
| 58 | PB6 | bidirectional | FT_fa I/O with LPTIM1_ETR, TIM4_CH1, I2C1_SCL (boot), I2C4_SCL, MDF1_SDI5 and USART1_TX alternate functions; COMP2_INP2 and WKUP3 functions. |
| 59 | PB7 | bidirectional | FT_fhav I/O with LPTIM1_IN2, TIM4_CH2, I2C1_SDA (boot), I2C4_SDA, USART1_RX and TIM17_CH1N alternate functions; COMP2_INM1, PVD_IN and WKUP4 functions. |
| 60 | PH3-BOOT0 | bidirectional | FT I/O that serves as the BOOT0 boot-mode selection pin. |
| 61 | PB8 | bidirectional | FT_f I/O with TIM4_CH3, SAI1_CK1, I2C1_SCL, MDF1_CCK0, SPI3_RDY, FDCAN1_RX (boot) and TIM16_CH1 alternate functions; WKUP5 function. |
| 62 | PB9 | bidirectional | FT_f I/O with IR_OUT, TIM4_CH4, SAI1_D2, I2C1_SDA, SPI2_NSS, FDCAN1_TX (boot) and TIM17_CH1 alternate functions. |
| 63 | VSS | power_in | Ground pin. |
| 64 | VDD | power_in | Main digital supply pin, 1.71 V to 3.6 V per the general operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage | VDDX - VSS | -0.3 | 4 | V | Including VDDSMPS, VDDA, VDDUSB, VDDDSI, VBAT, VREF+ | 181 | |
| I/O supply voltage when HSLV = 0 | VDDIOx - VSS | -0.3 | 4 | V | I/O supply when HSLV = 0 | 181 | |
| I/O supply voltage when HSLV = 1 | VDDIOx - VSS | -0.3 | 2.75 | V | I/O supply when HSLV = 1 | 181 | |
| Input voltage on FT_c pins | VIN | 5.5 | V | FT_c pins | 181 | ||
| Input voltage on any other pins | VIN | 4 | V | Any other pins | 181 | ||
| Allowed voltage difference for VREF+ > VDDA | VREF+ - VDDA | 0.4 | V | VREF+ > VDDA | 181 | ||
| Variations between different VDDx power pins | /dVDDx/ | 50 | mV | Same domain | 181 | ||
| Variations between all ground pins | /VSSx-VSS/ | 50 | mV | Including VREF- pin | 181 | ||
| Total current into sum of all VDD power lines | sum IVDD | 200 | mA | Source | 182 | ||
| Total current out of sum of all VSS ground lines | sum IVSS | 200 | mA | Sink | 182 | ||
| Maximum current into each VDD power pin | IVDD | 100 | mA | Source | 182 | ||
| Maximum current out of each VSS ground pin | IVSS | 100 | mA | Sink | 182 | ||
| Output current sunk by any I/O and control pin | IIO | 20 | mA | Sink | 182 | ||
| Output current sourced by any I/O and control pin | IIO | 20 | mA | Source | 182 | ||
| Total output current sunk by sum of all I/Os and control pins | sum I(PIN) | 120 | mA | Sink | 182 | ||
| Total output current sourced by sum of all I/Os and control pins | sum I(PIN) | 120 | mA | Source | 182 | ||
| Injected current on FT_xx, TT_xx, RST pins | IINJ(PIN) | -5 | 0 | mA | FT_xx, TT_xx, RST pins | 182 | |
| Total injected current (sum of all I/Os and control pins) | sum /IINJ(PIN)/ | 25 | mA | Sum of absolute negative injected currents | 182 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | Storage temperature range | 182 | |
| Maximum junction temperature | TJ | 140 | °C | Maximum junction temperature | 182 | ||
| Standard operating voltage | VDD | 1.71 | 3.6 | V | IO_VDD_HSLV = 0 | 183 | |
| Standard operating voltage HSLV | VDD | 1.71 | 2.7 | V | IO_VDD_HSLV = 1 | 183 | |
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 1.08 | 3.6 | V | At least one I/O in PG[15:2] used, IO_VDDIO2_HSLV = 0 | 183 | |
| Supply voltage for PG[15:2] I/Os HSLV | VDDIO2 | 1.08 | 2.7 | V | At least one I/O in PG[15:2] used, IO_VDDIO2_HSLV = 1 | 183 | |
| Supply voltage for PG[15:2] I/Os not used | VDDIO2 | 0 | 3.6 | V | PG[15:2] I/Os not used | 183 | |
| USB supply voltage | VDDUSB | 3 | 3.6 | V | USB used | 183 | |
| USB supply voltage not used | VDDUSB | 0 | 3.6 | V | USB not used | 183 | |
| Analog supply voltage COMP used | VDDA | 1.58 | 3.6 | V | COMP used | 183 | |
| Analog supply voltage DAC or OPAMP used | VDDA | 1.6 | 3.6 | V | DAC or OPAMP used | 183 | |
| Analog supply voltage ADC used | VDDA | 1.62 | 3.6 | V | ADC used | 183 | |
| Analog supply voltage VREFBUF used | VDDA | 1.8 | 3.6 | V | VREFBUF used (normal mode) | 183 | |
| Analog supply voltage not used | VDDA | 0 | 3.6 | V | ADC, DAC, COMP, OPAMP, and VREFBUF not used | 183 | |
| Backup domain supply voltage | VBAT | 1.65 | 3.6 | V | 183 | ||
| I/O input voltage | VIN | -0.3 | V | All I/Os except FT_c and TT_xx pins | 183 | ||
| Input voltage on FT_t pins in VBAT mode | VIN | -0.3 | V | FT_t pins in VBAT mode | 183 | ||
| FT_c I/O input voltage | VIN | -0.3 | 5 | V | FT_c I/Os | 183 | |
| TT_xx I/O input voltage | VIN | -0.3 | V | TT_xx I/Os (max VDDIOx + 0.3) | 183 | ||
| Sum of output current sourced by all I/Os powered by VSW | IIO_SW | 3 | mA | I/Os powered by VSW | 183 | ||
| Internal regulator ON Range 1 VCORE | VCORE | 1.15 | 1.21 | 1.27 | V | Internal regulator ON, Range 1 | 184 |
| Internal regulator ON Range 2 VCORE | VCORE | 1.05 | 1.1 | 1.15 | V | Internal regulator ON, Range 2 | 184 |
| Internal regulator ON Range 3 VCORE | VCORE | 0.95 | 1 | 1.05 | V | Internal regulator ON, Range 3 | 184 |
| Internal regulator ON Range 4 VCORE | VCORE | 0.81 | 0.9 | 0.99 | V | Internal regulator ON, Range 4 | 184 |
| AHB clock frequency Range 1 | fHCLK | 160 | MHz | Range 1 | 184 | ||
| AHB clock frequency Range 2 | fHCLK | 110 | MHz | Range 2 | 184 | ||
| AHB clock frequency Range 3 | fHCLK | 55 | MHz | Range 3 | 184 | ||
| AHB clock frequency Range 4 | fHCLK | 25 | MHz | Range 4 | 184 | ||
| Ambient temperature for suffix 6 (maximum power dissipation) | TA | -40 | 85 | °C | Maximum power dissipation, suffix 6 | 184 | |
| Ambient temperature for suffix 6 (low-power dissipation) | TA | -40 | 105 | °C | Low-power dissipation, suffix 6 | 184 | |
| Junction temperature range suffix 6 version | TJ | -40 | 105 | °C | Suffix 6 version | 184 | |
| Brownout reset threshold 0 rising edge | VBOR0 | 1.6 | 1.66 | 1.71 | V | Rising edge | 186 |
| Brownout reset threshold 0 falling edge range 1, 2, 3 | VBOR0 | 1.58 | 1.64 | 1.69 | V | Falling edge, range 1, 2, 3 | 186 |
| Brownout reset threshold 0 falling edge range 4 and low-power modes | VBOR0 | 1.58 | 1.64 | 1.69 | V | Falling edge, range 4 and low-power modes | 186 |
| Internal reference voltage range 1, 2, 3 | VREFINT | 1.175 | 1.215 | 1.255 | V | Range 1, 2, 3 | 188 |
| Internal reference voltage range 4 and low-power modes | VREFINT | 1.17 | 1.215 | 1.26 | V | Range 4 and low-power modes | 188 |
| Average temperature coefficient | TCoeff | 40 | 125 | ppm/°C | -40°C < TJ < +130 °C | 188 | |
| Average voltage coefficient | VDDCoeff | 500 | 2900 | ppm/V | 3.0 V <= VDD <= 3.6 V | 188 | |
| SMPS switching frequency VDD > 1.9 V | Freq | 3 | MHz | Range 1, 2, 3, VDD > 1.9 V | 187 | ||
| SMPS switching frequency VDD < 1.9 V | Freq | 1.5 | MHz | Range 1, 2, 3, VDD < 1.9 V | 187 |
CAD (KiCad official)
- Symbol:
STM32U595RIT6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32u595rit6-etched.step/stm32u595rit6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32u595rit6.step/stm32u595rit6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (385 pp, sha256
1a6951f7fcbc7a72, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).