component
STM32U535CET6
Public Made by Adomby adom
STMICROELECTRONICS Global Sourcing Parts, LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32U535CET6
STMICROELECTRONICS · Global Sourcing Parts · LQFP-48(7x7)
STM32U535CET6 from STMICROELECTRONICS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup domain supply for the RTC, backup registers and backup SRAM, specified from 1.65 V to 3.6 V (Table 32). |
| 2 | PC13 | bidirectional | FT I/O supplied through the VSW power switch, limited to a 3 mA shared source current, 2 MHz maximum speed with 30 pF load in output mode, and must not be used as a current source. |
| 3 | PC14-OSC32_IN | bidirectional | FT_o I/O supplied through VSW (3 mA shared source limit), with OSC32_IN as the LSE oscillator input. |
| 4 | PC15-OSC32_OUT | bidirectional | FT_o I/O supplied through VSW (3 mA shared source limit), with OSC32_OUT as the LSE oscillator output. |
| 5 | PH0-OSC_IN | bidirectional | FT I/O whose default function is the HSE oscillator input OSC_IN. |
| 6 | PH1-OSC_OUT | bidirectional | FT I/O whose default function is the HSE oscillator output OSC_OUT. |
| 7 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 8 | VSSA | power_in | Analog ground reference for the analog peripherals (ADC, DAC, COMP, OPAMP, VREFBUF). |
| 9 | VDDA | power_in | Analog supply; ADC requires 1.62 V to 3.6 V, DAC or OPAMP 1.60 V to 3.6 V, COMP 1.58 V to 3.6 V (Table 32). |
| 10 | PA0 | bidirectional | FT_hat I/O (5 V-tolerant, high-speed low-voltage mode, analog switch on VDDA, tamper); also ADC1_IN5, OPAMP1_VINP and WKUP1. |
| 11 | PA1 | bidirectional | FT_hat I/O (5 V-tolerant, high-speed low-voltage mode, analog switch on VDDA, tamper); also ADC1_IN6, OPAMP1_VINM and WKUP3. |
| 12 | PA2 | bidirectional | FT_ha I/O (5 V-tolerant, high-speed low-voltage mode, analog switch on VDDA); also ADC1_IN7, COMP1_INP3 and WKUP4/LSCO. |
| 13 | PA3 | bidirectional | TT_hav I/O (3.6 V-tolerant, high-speed low-voltage mode, analog switch on VDDA); also ADC1_IN8, OPAMP1_VOUT and WKUP5. |
| 14 | PA4 | bidirectional | TT_ha I/O (3.6 V-tolerant, analog switch on VDDA); also ADC1_IN9, ADC4_IN9, DAC1_OUT1 and WKUP2. |
| 15 | PA5 | bidirectional | TT_a I/O (3.6 V-tolerant, analog switch on VDDA); also ADC1_IN10, ADC4_IN10, DAC1_OUT2 and WKUP6. |
| 16 | PA6 | bidirectional | FT_ha I/O (5 V-tolerant, high-speed low-voltage mode, analog switch on VDDA); also ADC1_IN11, ADC4_IN11 and WKUP7. |
| 17 | PA7 | bidirectional | FT_fha I/O (5 V-tolerant, Fm+ capable, high-speed low-voltage mode, analog switch on VDDA); also ADC1_IN12, ADC4_IN20 and WKUP8. |
| 18 | PB0 | bidirectional | TT_ha I/O (3.6 V-tolerant, analog switch on VDDA); also ADC1_IN15, ADC4_IN18 and COMP1_OUT. |
| 19 | PB1 | bidirectional | FT_ha I/O (5 V-tolerant, high-speed low-voltage mode, analog switch on VDDA); also ADC1_IN16, ADC4_IN19, COMP1_INM1 and WKUP4. |
| 20 | PB2 | bidirectional | FT_hat I/O (5 V-tolerant, high-speed low-voltage mode, analog switch on VDDA, tamper); also ADC1_IN17, COMP1_INP2, WKUP1 and RTC_OUT2. |
| 21 | PB10 | bidirectional | FT_fhv I/O (5 V-tolerant, Fm+ capable, high-speed low-voltage mode, very high-speed); also COMP1_OUT and WKUP8. |
| 22 | VCAP | power_out | External decoupling for the internal core regulator output: COUT 4.7 µF or 2 × 2.2 µF ±20%, ESR < 20 mΩ at 3 MHz, rated ≥ 10 V (Section 5.1.6). |
| 23 | VSS | power_in | Digital ground. |
| 24 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V (Table 32). |
| 25 | PB12 | bidirectional | FT_hav I/O (5 V-tolerant, high-speed low-voltage mode, very high-speed); alternate functions include TIM1_BKIN, OCTOSPI1_NCLK and TIM15_BKIN. |
| 26 | PB13 | bidirectional | FT_fa I/O (5 V-tolerant, Fm+ capable, analog switch on VDDA); alternate functions include TIM1_CH1N, I2C2_SCL and USART3_CTS. |
| 27 | PB14 | bidirectional | FT_fa I/O (5 V-tolerant, Fm+ capable, analog switch on VDDA); alternate functions include TIM1_CH2N, I2C2_SDA and TIM15_CH1. |
| 28 | PB15 | bidirectional | FT I/O (5 V-tolerant); alternate functions include RTC_REFIN, TIM1_CH3N and WKUP7. |
| 29 | PA8 | bidirectional | FT_hv I/O (5 V-tolerant, high-speed low-voltage mode, very high-speed); alternate functions include MCO, TIM1_CH1 and USB_SOF. |
| 30 | PA9 | bidirectional | FT I/O (5 V-tolerant); alternate functions include TIM1_CH2, USART1_TX (boot) and TIM15_BKIN. |
| 31 | PA10 | bidirectional | FT I/O (5 V-tolerant); alternate functions include TIM1_CH3, USART1_RX (boot) and TIM17_BKIN. |
| 32 | PA11 | bidirectional | FT_u I/O (5 V-tolerant, USB function supplied by VDDUSB); alternate functions include TIM1_CH4 and FDCAN1_RX; USB_DM (boot). |
| 33 | PA12 | bidirectional | FT_u I/O (5 V-tolerant, USB function supplied by VDDUSB); alternate functions include TIM1_ETR and FDCAN1_TX; USB_DP (boot). |
| 34 | PA13 | bidirectional | FT I/O; after reset configured as the JTMS/SWDIO debug function with internal pull-up enabled. |
| 35 | VSS | power_in | Digital ground. |
| 36 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V (Table 32). |
| 37 | PA14 | bidirectional | FT I/O; after reset configured as the JTCK/SWCLK debug function with internal pull-down enabled. |
| 38 | PA15 (JTDI) | bidirectional | FT I/O; after reset configured as the JTDI debug function with internal pull-up enabled. |
| 39 | PB3 | bidirectional | FT_fa I/O (5 V-tolerant, Fm+ capable, analog switch on VDDA); after reset the JTDO/TRACESWO function; also COMP1_INP4. |
| 40 | PB4 (NJTRST) | bidirectional | FT_fa I/O (5 V-tolerant, Fm+ capable, analog switch on VDDA); after reset the NJTRST function with internal pull-up enabled; also COMP1_INP5. |
| 41 | PB5 | bidirectional | FT_hav I/O (5 V-tolerant, high-speed low-voltage mode, very high-speed); also WKUP6 and SAI1_SD_B. |
| 42 | PB6 | bidirectional | FT_fa I/O (5 V-tolerant, Fm+ capable, analog switch on VDDA); also COMP1_INP6, WKUP3 and TIM16_CH1N. |
| 43 | PB7 | bidirectional | FT_fhav I/O (5 V-tolerant, Fm+ capable, high-speed low-voltage mode, very high-speed); also PVD_IN and WKUP4. |
| 44 | PH3-BOOT0 | input | FT I/O whose additional function is BOOT0, the boot mode selection input. |
| 45 | PB8 | bidirectional | FT_fh I/O (5 V-tolerant, Fm+ capable, high-speed low-voltage mode); also WKUP5 and TIM16_CH1. |
| 46 | PB9 | bidirectional | FT_fh I/O (5 V-tolerant, Fm+ capable, high-speed low-voltage mode); alternate functions include IR_OUT, TIM4_CH4 and TIM17_CH1. |
| 47 | VSS | power_in | Digital ground. |
| 48 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V (Table 32). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMICROELECTRONICS |
| Package | LQFP-48(7x7) |
| Category | Global Sourcing Parts |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDDSMPS, VDDA, VDDUSB, VBAT, VREF+) | VDDX - VSS | -0.3 | 4 | V | 130 | ||
| I/O supply when HSLV = 0 | VDDIOx - VSS | -0.3 | 4 | V | HSLV = 0 | 130 | |
| I/O supply when HSLV = 1 | VDDIOx - VSS | -0.3 | 2.75 | V | HSLV = 1 | 130 | |
| Input voltage on FT_xx pins except FT_c pins | VIN | -0.3 | V | Max printed as Min(min(VDD, VDDA, VDDUSB, VDDIO2) + 4.0, 6.0); see review_required | 130 | ||
| Input voltage on FT_t pins in VBAT mode | VIN | -0.3 | V | Max printed as Min(min(VBAT, VDDA, VDDUSB, VDDIO2) + 4.0, 6.0); see review_required | 130 | ||
| Input voltage on FT_c pins | VIN | -0.3 | 5.5 | V | 130 | ||
| Input voltage on any other pins | VIN | -0.3 | 4 | V | 130 | ||
| Allowed voltage difference for VREF+ > VDDA | VREF+ - VDDA | 0.4 | V | 130 | |||
| Variations between different VDDx power pins of the same domain | /∆VDDx/ | 50 | mV | 130 | |||
| Variations between all the different ground pins (including VREF-) | /VSSx-VSS/ | 50 | mV | 130 | |||
| Total current into sum of all VDD power lines (source) | ∑IVDD | 200 | mA | 130 | |||
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | 200 | mA | 130 | |||
| Maximum current into each VDD power pin (source) | IVDD | 100 | mA | 130 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS | 100 | mA | 130 | |||
| Output current sunk by any I/O and control pin | IIO | 20 | mA | 130 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | 120 | mA | 130 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | 120 | mA | 130 | |||
| Injected current on FT_xx, TT_xx, RST pins | IINJ(PIN) | -5 | 0 | mA | 130 | ||
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | Printed as ±25 | 130 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 131 | ||
| Maximum junction temperature | TJ | 140 | °C | 131 | |||
| Standard operating voltage | VDD | 1.71 | 3.6 | V | IO_VDD_HSLV = 0 | 132 | |
| Standard operating voltage | VDD | 1.71 | 2.7 | V | IO_VDD_HSLV = 1 | 132 | |
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 1.08 | 3.6 | V | At least one I/O in PG[15:2] used, IO_VDDIO2_HSLV = 0 | 132 | |
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 1.08 | 2.7 | V | At least one I/O in PG[15:2] used, IO_VDDIO2_HSLV = 1 | 132 | |
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 0 | 3.6 | V | PG[15:2] I/Os not used | 132 | |
| USB supply voltage | VDDUSB | 3 | 3.6 | V | USB used | 132 | |
| USB supply voltage | VDDUSB | 0 | 3.6 | V | USB not used | 132 | |
| Analog supply voltage | VDDA | 1.58 | 3.6 | V | COMP used | 132 | |
| Analog supply voltage | VDDA | 1.6 | 3.6 | V | DAC or OPAMP used | 132 | |
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | ADC used | 132 | |
| Analog supply voltage | VDDA | 1.8 | 3.6 | V | VREFBUF used (normal mode) | 132 | |
| Analog supply voltage | VDDA | 0 | 3.6 | V | ADC, DAC, COMP, OPAMP, and VREFBUF not used | 132 | |
| Backup domain supply voltage | VBAT | 1.65 | 3.6 | V | 132 | ||
| I/O input voltage | VIN | -0.3 | V | All I/Os except FT_c and TT_xx pins; max printed as Min(min(VDD, VDDA, VDDUSB, VDDIO2)+3.6, 5.5); see review_required | 132 | ||
| Input voltage on FT_t pins in VBAT mode | VIN | -0.3 | V | Max printed as Min(min(VBAT, VDDA, VDDUSB, VDDIO2)+3.6, 5.5); see review_required | 132 | ||
| FT_c I/O input voltage | VIN | -0.3 | 5 | V | FT_c I/Os | 132 | |
| TT_xx I/O input voltage | VIN | -0.3 | V | TT_xx I/Os; max printed as VDDIOx + 0.3 | 132 | ||
| Sum of output current sourced by all I/Os powered by VSW | IIO_SW | 3 | mA | 132 | |||
| Internal regulator VCORE | VCORE | 1.15 | 1.21 | 1.27 | V | Internal regulator ON, Range 1 | 133 |
| Internal regulator VCORE | VCORE | 1.05 | 1.1 | 1.15 | V | Internal regulator ON, Range 2 | 133 |
| Internal regulator VCORE | VCORE | 0.95 | 1 | 1.05 | V | Internal regulator ON, Range 3 | 133 |
| Internal regulator VCORE | VCORE | 0.81 | 0.9 | 0.99 | V | Internal regulator ON, Range 4 | 133 |
| AHB clock frequency | fHCLK | 160 | MHz | Range 1 | 133 | ||
| AHB clock frequency | fHCLK | 110 | MHz | Range 2 | 133 | ||
| AHB clock frequency | fHCLK | 55 | MHz | Range 3 | 133 | ||
| AHB clock frequency | fHCLK | 25 | MHz | Range 4 | 133 | ||
| Ambient temperature for suffix 6, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation | 133 | |
| Ambient temperature for suffix 6, low-power dissipation | TA | -40 | 105 | °C | Low-power dissipation | 133 | |
| Junction temperature range, suffix 6 version | TJ | -40 | 105 | °C | Suffix 6 version | 133 | |
| Supply current in Run mode (LDO) | IDD(Run) | 1.6 | 2.1 | mA | Range 4, fHCLK = fMSI 24 MHz, all peripherals and AHB/APB disabled, 25 °C | 139 | |
| Supply current in Run mode (LDO) | IDD(Run) | 4.1 | 9.6 | mA | Range 4, fHCLK = fMSI 24 MHz, all peripherals and AHB/APB disabled, 125 °C | 139 | |
| Supply current in Run mode (LDO) | IDD(Run) | 13 | 16 | mA | Range 1, fHCLK = PLL on HSE 16 MHz bypass 160 MHz, all peripherals and AHB/APB disabled, 25 °C | 139 | |
| Supply current in Run mode (LDO) | IDD(Run) | 17 | 33 | mA | Range 1, fHCLK = PLL on HSE 16 MHz bypass 160 MHz, all peripherals and AHB/APB disabled, 125 °C | 139 | |
| Brownout reset threshold 0, rising edge | VBOR0 | 1.6 | 1.66 | 1.71 | V | Rising edge | 135 |
| Internal reference voltage | VREFINT | 1.175 | 1.215 | 1.255 | V | Range 1, 2, 3 | 136 |
| Internal reference voltage spread over the temperature range | ∆VREFINT | 6 | 11.5 | mV | VDD = 3 V | 137 | |
| Average temperature coefficient | TCoeff | 40 | 125 | ppm/°C | -40°C < TJ < +130 °C | 137 | |
| Average voltage coefficient | VDDCoeff | 500 | 2900 | ppm/V | 3.0 V ≤ VDD ≤ 3.6 V | 137 |
CAD (KiCad official)
- Symbol:
STM32U535CET6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32u535cet6-etched.step/stm32u535cet6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32u535cet6.step/stm32u535cet6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMICROELECTRONICS datasheet (302 pp, sha256
ca3634c93b2f3a33, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).