main
Ray
Publish 0.1.0
5bf9f56
STM32L4R7VIT6
STMicroelectronics · ST Microelectronics · LQFP-100(14x14)
STM32L4R7VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant FT_l I/O with LCD function supplied by VLCD; alternate functions include TRACECK, TIM3_ETR, SAI1_CK1, FMC_A23 and EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant FT_l I/O with LCD function supplied by VLCD; alternate functions include TRACED0, TIM3_CH1, OCTOSPIM_P1_DQS, FMC_A19 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED1, TIM3_CH2, SAI1_D2, DCMI_D4, LCD_B0 and FMC_A20. |
| 4 | PE5 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED2, TIM3_CH3, SAI1_CK2, DCMI_D6, LCD_G0 and FMC_A21. |
| 5 | PE6 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED3, TIM3_CH4, SAI1_D1, DCMI_D7, LCD_G1 and FMC_A22; also RTC_TAMP3 and WKUP3 as additional functions. |
| 6 | VBAT | power_in | Power supply for the RTC, the external 32 kHz oscillator and the backup registers when VDD is not present, 1.55 V to 3.6 V. |
| 7 | PC13 | bidirectional | 5 V-tolerant FT I/O supplied through the power switch, which sinks only 3 mA, so output use is limited to 2 MHz with 30 pF and it must not source LED-type loads. |
| 8 | PC14-OSC32_IN | bidirectional | 5 V-tolerant FT I/O (PC14) supplied through the power switch with OSC32_IN as the 32 kHz oscillator input function. |
| 9 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant FT I/O (PC15) supplied through the power switch with OSC32_OUT as the 32 kHz oscillator output function. |
| 10 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 11 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | 5 V-tolerant FT I/O (PH0) with OSC_IN as the high-speed oscillator input function. |
| 13 | PH1-OSC_OUT | bidirectional | 5 V-tolerant FT I/O (PH1) with OSC_OUT as the high-speed oscillator output function. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V-tolerant FT_fla I/O with ADC1_IN1 analog input; alternate functions include LPTIM1_IN1, I2C3_SCL, LPUART1_RX and LPTIM2_IN1. |
| 16 | PC1 | bidirectional | 5 V-tolerant FT_fla I/O with ADC1_IN2 analog input; alternate functions include TRACED0, LPTIM1_OUT, SPI2_MOSI, I2C3_SDA and LPUART1_TX. |
| 17 | PC2 | bidirectional | 5 V-tolerant FT_la I/O with ADC1_IN3 analog input; alternate functions include LPTIM1_IN2, SPI2_MISO and OCTOSPIM_P1_IO5. |
| 18 | PC3 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN4 analog input; alternate functions include LPTIM1_ETR, SAI1_D1, SPI2_MOSI and LPTIM2_ETR. |
| 19 | VSSA | power_in | Analog ground pin for the ADCs, DACs, comparators and operational amplifiers. |
| 20 | VREF- | power_in | Negative reference voltage for the ADC and DAC; must always equal VSSA. |
| 21 | VREF+ | power_in | Positive reference voltage for the ADC and DAC, and output of the internal voltage reference buffer when enabled; must be between 2 V and VDDA when VDDA is at least 2 V. |
| 22 | VDDA | power_in | Analog supply for ADCs/COMPs (1.62 V min), DACs/OPAMPs (1.8 V min), VREFBUF (2.4 V min) up to 3.6 V. |
| 23 | PA0 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN5 analog input and OPAMP1_VINP; alternate functions include TIM2_CH1, TIM5_CH1, USART2_CTS_NSS and UART4_TX. |
| 24 | PA1 | bidirectional | 5 V-tolerant FT_la I/O with ADC1_IN6 analog input and OPAMP1_VINM; alternate functions include TIM2_CH2, TIM5_CH2, SPI1_SCK and USART2_RTS_DE. |
| 25 | PA2 | bidirectional | 5 V-tolerant FT_la I/O with ADC1_IN7 analog input; alternate functions include TIM2_CH3, TIM5_CH3, USART2_TX and LPUART1_TX, with WKUP4/LSCO as additional function. |
| 26 | PA3 | bidirectional | TT_a I/O (3.6 V tolerant) with ADC1_IN8 analog input and OPAMP1_VOUT; alternate functions include TIM2_CH4, USART2_RX and LPUART1_RX. |
| 27 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 28 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
| 29 | PA4 | bidirectional | TT_a I/O (3.6 V tolerant) with ADC1_IN9 analog input and DAC1_OUT1; alternate functions include SPI1_NSS, SPI3_NSS, USART2_CK and LPTIM2_OUT. |
| 30 | PA5 | bidirectional | TT_a I/O (3.6 V tolerant) with ADC1_IN10 analog input and DAC1_OUT2; alternate functions include TIM2_CH1, TIM2_ETR, TIM8_CH1N and SPI1_SCK. |
| 31 | PA6 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN11 analog input and OPAMP2_VINP; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO and LPUART1_CTS. |
| 32 | PA7 | bidirectional | 5 V-tolerant FT_fla I/O with ADC1_IN12 analog input and OPAMP2_VINM; alternate functions include TIM1_CH1N, TIM3_CH2, I2C3_SCL and SPI1_MOSI. |
| 33 | PC4 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN13 analog input and COMP1_INM; alternate functions include USART3_TX and OCTOSPIM_P1_IO7. |
| 34 | PC5 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN14 analog input, COMP1_INP and WKUP5 wakeup; alternate functions include SAI1_D3 and USART3_RX. |
| 35 | PB0 | bidirectional | TT_la I/O (3.6 V tolerant) with ADC1_IN15 analog input and OPAMP2_VOUT; alternate functions include TIM1_CH2N, TIM3_CH3, SPI1_NSS and COMP1_OUT. |
| 36 | PB1 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN16 analog input and COMP1_INM; alternate functions include TIM1_CH3N, TIM3_CH4, DFSDM1_DATIN0 and LPTIM2_IN1. |
| 37 | PB2 | bidirectional | 5 V-tolerant FT_a I/O with COMP1_INP input; alternate functions include RTC_OUT, LPTIM1_OUT, I2C3_SMBA and LCD_B1. |
| 38 | PE7 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_ETR, DFSDM1_DATIN2, LCD_B6, FMC_D4 and SAI1_SD_B. |
| 39 | PE8 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, LCD_B7, FMC_D5 and SAI1_SCK_B. |
| 40 | PE9 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH1, DFSDM1_CKOUT, LCD_G2, FMC_D6 and SAI1_FS_B. |
| 41 | PE10 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, OCTOSPIM_P1_CLK and FMC_D7. |
| 42 | PE11 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, OCTOSPIM_P1_NCS and FMC_D8. |
| 43 | PE12 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3 and FMC_D9. |
| 44 | PE13 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4 and FMC_D10. |
| 45 | PE14 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, OCTOSPIM_P1_IO2 and FMC_D11. |
| 46 | PE15 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_BKIN, SPI1_MOSI, OCTOSPIM_P1_IO3 and FMC_D12. |
| 47 | PB10 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX and LPUART1_RX. |
| 48 | PB11 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX and DSI_TE. |
| 49 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 50 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
| 51 | PB12 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1 and USART3_CK. |
| 52 | PB13 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS_NSS and LPUART1_CTS. |
| 53 | PB14 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM1_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2 and USART3_RTS_DE. |
| 54 | PB15 | bidirectional | 5 V-tolerant FT I/O; alternate functions include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, DFSDM1_CKIN2 and TIM15_CH2. |
| 55 | PD8 | bidirectional | 5 V-tolerant FT I/O; alternate functions include USART3_TX, DCMI_HSYNC, LCD_R3 and FMC_D13. |
| 56 | PD9 | bidirectional | 5 V-tolerant FT I/O; alternate functions include USART3_RX, DCMI_PIXCLK, LCD_R4, FMC_D14 and SAI2_MCLK_A. |
| 57 | PD10 | bidirectional | 5 V-tolerant FT I/O; alternate functions include USART3_CK, TSC_G6_IO1, LCD_R5, FMC_D15 and SAI2_SCK_A. |
| 58 | PD11 | bidirectional | 5 V-tolerant FT I/O; alternate functions include I2C4_SMBA, USART3_CTS_NSS, TSC_G6_IO2, LCD_R6, FMC_A16 and LPTIM2_ETR. |
| 59 | PD12 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH1, I2C4_SCL, USART3_RTS_DE, LCD_R7 and FMC_A17. |
| 60 | PD13 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH2, I2C4_SDA, TSC_G6_IO4, FMC_A18 and LPTIM2_OUT. |
| 61 | PD14 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM4_CH3, LCD_B2 and FMC_D0. |
| 62 | PD15 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM4_CH4, LCD_B3 and FMC_D1. |
| 63 | PC6 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, DCMI_D0, LCD_R0 and SAI2_MCLK_A. |
| 64 | PC7 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, DCMI_D1, LCD_R1 and SAI2_MCLK_B. |
| 65 | PC8 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM3_CH3, TIM8_CH3, TSC_G4_IO3, DCMI_D2 and SDMMC1_D0. |
| 66 | PC9 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TRACED0, TIM8_BKIN2, TIM3_CH4, TIM8_CH4, DCMI_D3 and OTG_FS_NOE. |
| 67 | PA8 | bidirectional | 5 V-tolerant FT_f I/O with Fm+ capability; alternate functions include MCO, TIM1_CH1, SAI1_CK2, USART1_CK and LPTIM2_OUT. |
| 68 | PA9 | bidirectional | 5 V-tolerant FT_flu I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH2, SPI2_SCK, DCMI_D0, USART1_TX and OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5 V-tolerant FT_flu I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH3, SAI1_D1, DCMI_D1, USART1_RX and OTG_FS_ID. |
| 70 | PA11 | bidirectional | 5 V-tolerant FT_u I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS_NSS, CAN1_RX and OTG_FS_DM. |
| 71 | PA12 | bidirectional | 5 V-tolerant FT_u I/O with USB function supplied by VDDUSB; alternate functions include TIM1_ETR, SPI1_MOSI, USART1_RTS_DE, CAN1_TX and OTG_FS_DP. |
| 72 | PA13 | bidirectional | 5 V-tolerant FT I/O that after reset is the JTMS/SWDIO debug function, with the internal pull-up active; also IR_OUT and OTG_FS_NOE as alternate functions. |
| 73 | VDDUSB | power_in | Independent USB transceiver supply, 3.0 V to 3.6 V when USB is used. |
| 74 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 75 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
| 76 | PA14 | bidirectional | 5 V-tolerant FT I/O that after reset is the JTCK/SWCLK debug function, with the internal pull-down active; also LPTIM1_OUT and I2C1_SMBA as alternate functions. |
| 77 | PA15 (JTDI) | bidirectional | 5 V-tolerant FT I/O that after reset is the JTDI debug function, with the internal pull-up active; also TIM2_CH1, USART2_RX and SPI1_NSS as alternate functions. |
| 78 | PC10 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED1, SPI3_SCK, USART3_TX, UART4_TX and DCMI_D8. |
| 79 | PC11 | bidirectional | 5 V-tolerant FT I/O; alternate functions include DCMI_D2, OCTOSPIM_P1_NCS, SPI3_MISO, USART3_RX and UART4_RX. |
| 80 | PC12 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED3, SPI3_MOSI, USART3_CK, UART5_TX and DCMI_D9. |
| 81 | PD0 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SPI2_NSS, DFSDM1_DATIN7, CAN1_RX, LCD_B4 and FMC_D2. |
| 82 | PD1 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SPI2_SCK, DFSDM1_CKIN7, CAN1_TX, LCD_B5 and FMC_D3. |
| 83 | PD2 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED2, TIM3_ETR, USART3_RTS_DE, UART5_RX and SDMMC1_CMD. |
| 84 | PD3 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SPI2_SCK, DCMI_D5, SPI2_MISO, USART2_CTS_NSS, LCD_CLK and FMC_CLK. |
| 85 | PD4 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, OCTOSPIM_P1_IO4 and FMC_NOE. |
| 86 | PD5 | bidirectional | 5 V-tolerant FT I/O; alternate functions include USART2_TX, OCTOSPIM_P1_IO5, FMC_NWE and EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SAI1_D1, DCMI_D10, SPI3_MOSI, DFSDM1_DATIN1, USART2_RX and FMC_NWAIT. |
| 88 | PD7 | bidirectional | 5 V-tolerant FT I/O; alternate functions include DFSDM1_CKIN1, USART2_CK, OCTOSPIM_P1_IO7 and FMC_NCE/FMC_NE1. |
| 89 | PB3 | bidirectional | 5 V-tolerant FT_la I/O that after reset is the JTDO/TRACESWO debug function; also TIM2_CH2, SPI1_SCK and SPI3_SCK as alternate functions and COMP2_INM as analog input. |
| 90 | PB4 | bidirectional | 5 V-tolerant FT_fa I/O that after reset is the NJTRST debug function, with the internal pull-up active; also TIM3_CH1, SPI1_MISO and COMP2_INP. |
| 91 | PB5 | bidirectional | 5 V-tolerant FT_la I/O; alternate functions include LPTIM1_IN1, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, USART1_CK and COMP2_OUT. |
| 92 | PB6 | bidirectional | 5 V-tolerant FT_fa I/O; alternate functions include LPTIM1_ETR, TIM4_CH1, I2C1_SCL, USART1_TX and DCMI_D5, with COMP2_INP as analog input. |
| 93 | PB7 | bidirectional | 5 V-tolerant FT_fla I/O; alternate functions include LPTIM1_IN2, TIM4_CH2, I2C1_SDA, USART1_RX, DCMI_VSYNC and FMC_NL, with PVD_IN and COMP2_INM as analog inputs. |
| 94 | PH3-BOOT0 | bidirectional | 5 V-tolerant FT I/O (PH3) that also serves as the dedicated BOOT0 pin; the input voltage on BOOT0 may reach 9 V. |
| 95 | PB8 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH3, SAI1_CK1, I2C1_SCL, DCMI_D6 and SDMMC1_D4. |
| 96 | PB9 | bidirectional | 5 V-tolerant FT_fl I/O; alternate functions include IR_OUT, TIM4_CH4, SAI1_D2, I2C1_SDA, SPI2_NSS and CAN1_TX. |
| 97 | PE0 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM4_ETR, DCMI_D2, LCD_HSYNC, FMC_NBL0 and TIM16_CH1. |
| 98 | PE1 | bidirectional | 5 V-tolerant FT I/O; alternate functions include DCMI_D3, LCD_VSYNC, FMC_NBL1 and TIM17_CH1. |
| 99 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 100 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage | VDDX - VSS | -0.3 | 4 | V | including VDD, VDDA, VDDIO2, VDDUSB, VBAT, VREF+ | 139 | |
| Input voltage on FT_xxx pins | VIN | -0.3 | V | VSS-0.3 to min(VDD, VDDA, VDDIO2, VDDUSB)+4.0 | 139 | ||
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | 139 | ||
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | VSS to 9.0 | 139 | |
| Total current into all VDD lines | ΣIVDD | 200 | mA | source | 139 | ||
| Total current out of all VSS lines | ΣIVSS | 200 | mA | sink | 139 | ||
| Max current into each VDD pin | IVDD(PIN) | 100 | mA | source | 139 | ||
| Max current out of each VSS pin | IVSS(PIN) | 100 | mA | sink | 139 | ||
| Output current sunk by any I/O | IIO(PIN) | 20 | mA | any I/O and control pin except FT_f | 139 | ||
| Total output current sunk by all I/Os | ΣIIO(PIN) | 100 | mA | 139 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 140 | ||
| Maximum junction temperature | TJ | 150 | °C | 140 | |||
| Internal AHB clock frequency | fHCLK | 0 | 120 | MHz | 140 | ||
| Standard operating voltage | VDD | 1.71 | 3.6 | V | 140 | ||
| PG[15:2] I/Os supply voltage | VDDIO2 | 1.08 | 3.6 | V | At least one I/O in PG[15:2] used | 140 | |
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 140 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 140 | ||
| USB supply voltage | VDDUSB | 3 | 3.6 | V | USB used | 141 | |
| Power dissipation LQFP100 | PD | 476 | mW | TA = 85 °C for suffix 6 | 141 | ||
| Ambient temperature suffix 6 | TA | -40 | 85 | °C | Maximum power dissipation | 141 | |
| Junction temperature suffix 6 | TJ | -40 | 105 | °C | Suffix 6 version | 141 | |
| VDD fall time rate | tVDD | 10 | µs/V | VDD fall time rate | 142 | ||
| Reset temporization after BOR0 | tRSTTEMPO | 250 | 400 | µs | VDD rising | 142 | |
| Brown-out reset threshold 0 | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 142 |
| Brown-out reset threshold 1 | VBOR1 | 2.06 | 2.1 | 2.14 | V | Rising edge | 142 |
| Brown-out reset threshold 4 | VBOR4 | 2.85 | 2.9 | 2.95 | V | Rising edge | 142 |
| BOR (except BOR0) and PVD consumption from VDD | IDD(BOR_PVD) | 1.1 | 1.6 | µA | 143 | ||
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 144 |
| Average temperature coefficient of VREFINT | TCoeff | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 144 | |
| Supply current in Run mode, Range 1 Boost | IDD(Run) | 18.5 | 21 | mA | 120 MHz, 25°C, single bank, ART enable, fHSE bypass, PLL ON | 147 | |
| Supply current in Run mode, Range 1 Boost, 85°C | IDD(Run) | 21 | 26 | mA | 120 MHz, 85°C, single bank, ART enable | 147 | |
| Supply current in Stop 2 mode, RTC disabled | IDD(Stop 2) | 2.55 | 8 | µA | VDD = 3 V, 25°C | 168 | |
| Supply current in Stop 0 mode | IDD(Stop 0) | 295 | 570 | µA | VDD = 3 V, 25°C, RTC disabled | 171 | |
| Supply current in Standby mode | IDD(Standby) | 150 | 370 | nA | VDD = 3 V, 25°C, RTC disabled, no independent watchdog | 171 |
CAD (KiCad official)
- Symbol:
STM32L4R7VIT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32l4r7vit6-etched.step/stm32l4r7vit6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l4r7vit6.step/stm32l4r7vit6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (307 pp, sha256
049cc34598b1e11a, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L4R7VIT6
**STMicroelectronics** · ST Microelectronics · LQFP-100(14x14)
STM32L4R7VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant FT_l I/O with LCD function supplied by VLCD; alternate functions include TRACECK, TIM3_ETR, SAI1_CK1, FMC_A23 and EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant FT_l I/O with LCD function supplied by VLCD; alternate functions include TRACED0, TIM3_CH1, OCTOSPIM_P1_DQS, FMC_A19 and EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED1, TIM3_CH2, SAI1_D2, DCMI_D4, LCD_B0 and FMC_A20. |
| 4 | PE5 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED2, TIM3_CH3, SAI1_CK2, DCMI_D6, LCD_G0 and FMC_A21. |
| 5 | PE6 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED3, TIM3_CH4, SAI1_D1, DCMI_D7, LCD_G1 and FMC_A22; also RTC_TAMP3 and WKUP3 as additional functions. |
| 6 | VBAT | power_in | Power supply for the RTC, the external 32 kHz oscillator and the backup registers when VDD is not present, 1.55 V to 3.6 V. |
| 7 | PC13 | bidirectional | 5 V-tolerant FT I/O supplied through the power switch, which sinks only 3 mA, so output use is limited to 2 MHz with 30 pF and it must not source LED-type loads. |
| 8 | PC14-OSC32_IN | bidirectional | 5 V-tolerant FT I/O (PC14) supplied through the power switch with OSC32_IN as the 32 kHz oscillator input function. |
| 9 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant FT I/O (PC15) supplied through the power switch with OSC32_OUT as the 32 kHz oscillator output function. |
| 10 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 11 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | 5 V-tolerant FT I/O (PH0) with OSC_IN as the high-speed oscillator input function. |
| 13 | PH1-OSC_OUT | bidirectional | 5 V-tolerant FT I/O (PH1) with OSC_OUT as the high-speed oscillator output function. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V-tolerant FT_fla I/O with ADC1_IN1 analog input; alternate functions include LPTIM1_IN1, I2C3_SCL, LPUART1_RX and LPTIM2_IN1. |
| 16 | PC1 | bidirectional | 5 V-tolerant FT_fla I/O with ADC1_IN2 analog input; alternate functions include TRACED0, LPTIM1_OUT, SPI2_MOSI, I2C3_SDA and LPUART1_TX. |
| 17 | PC2 | bidirectional | 5 V-tolerant FT_la I/O with ADC1_IN3 analog input; alternate functions include LPTIM1_IN2, SPI2_MISO and OCTOSPIM_P1_IO5. |
| 18 | PC3 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN4 analog input; alternate functions include LPTIM1_ETR, SAI1_D1, SPI2_MOSI and LPTIM2_ETR. |
| 19 | VSSA | power_in | Analog ground pin for the ADCs, DACs, comparators and operational amplifiers. |
| 20 | VREF- | power_in | Negative reference voltage for the ADC and DAC; must always equal VSSA. |
| 21 | VREF+ | power_in | Positive reference voltage for the ADC and DAC, and output of the internal voltage reference buffer when enabled; must be between 2 V and VDDA when VDDA is at least 2 V. |
| 22 | VDDA | power_in | Analog supply for ADCs/COMPs (1.62 V min), DACs/OPAMPs (1.8 V min), VREFBUF (2.4 V min) up to 3.6 V. |
| 23 | PA0 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN5 analog input and OPAMP1_VINP; alternate functions include TIM2_CH1, TIM5_CH1, USART2_CTS_NSS and UART4_TX. |
| 24 | PA1 | bidirectional | 5 V-tolerant FT_la I/O with ADC1_IN6 analog input and OPAMP1_VINM; alternate functions include TIM2_CH2, TIM5_CH2, SPI1_SCK and USART2_RTS_DE. |
| 25 | PA2 | bidirectional | 5 V-tolerant FT_la I/O with ADC1_IN7 analog input; alternate functions include TIM2_CH3, TIM5_CH3, USART2_TX and LPUART1_TX, with WKUP4/LSCO as additional function. |
| 26 | PA3 | bidirectional | TT_a I/O (3.6 V tolerant) with ADC1_IN8 analog input and OPAMP1_VOUT; alternate functions include TIM2_CH4, USART2_RX and LPUART1_RX. |
| 27 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 28 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
| 29 | PA4 | bidirectional | TT_a I/O (3.6 V tolerant) with ADC1_IN9 analog input and DAC1_OUT1; alternate functions include SPI1_NSS, SPI3_NSS, USART2_CK and LPTIM2_OUT. |
| 30 | PA5 | bidirectional | TT_a I/O (3.6 V tolerant) with ADC1_IN10 analog input and DAC1_OUT2; alternate functions include TIM2_CH1, TIM2_ETR, TIM8_CH1N and SPI1_SCK. |
| 31 | PA6 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN11 analog input and OPAMP2_VINP; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO and LPUART1_CTS. |
| 32 | PA7 | bidirectional | 5 V-tolerant FT_fla I/O with ADC1_IN12 analog input and OPAMP2_VINM; alternate functions include TIM1_CH1N, TIM3_CH2, I2C3_SCL and SPI1_MOSI. |
| 33 | PC4 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN13 analog input and COMP1_INM; alternate functions include USART3_TX and OCTOSPIM_P1_IO7. |
| 34 | PC5 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN14 analog input, COMP1_INP and WKUP5 wakeup; alternate functions include SAI1_D3 and USART3_RX. |
| 35 | PB0 | bidirectional | TT_la I/O (3.6 V tolerant) with ADC1_IN15 analog input and OPAMP2_VOUT; alternate functions include TIM1_CH2N, TIM3_CH3, SPI1_NSS and COMP1_OUT. |
| 36 | PB1 | bidirectional | 5 V-tolerant FT_a I/O with ADC1_IN16 analog input and COMP1_INM; alternate functions include TIM1_CH3N, TIM3_CH4, DFSDM1_DATIN0 and LPTIM2_IN1. |
| 37 | PB2 | bidirectional | 5 V-tolerant FT_a I/O with COMP1_INP input; alternate functions include RTC_OUT, LPTIM1_OUT, I2C3_SMBA and LCD_B1. |
| 38 | PE7 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_ETR, DFSDM1_DATIN2, LCD_B6, FMC_D4 and SAI1_SD_B. |
| 39 | PE8 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, LCD_B7, FMC_D5 and SAI1_SCK_B. |
| 40 | PE9 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH1, DFSDM1_CKOUT, LCD_G2, FMC_D6 and SAI1_FS_B. |
| 41 | PE10 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, OCTOSPIM_P1_CLK and FMC_D7. |
| 42 | PE11 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, OCTOSPIM_P1_NCS and FMC_D8. |
| 43 | PE12 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3 and FMC_D9. |
| 44 | PE13 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4 and FMC_D10. |
| 45 | PE14 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, OCTOSPIM_P1_IO2 and FMC_D11. |
| 46 | PE15 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_BKIN, SPI1_MOSI, OCTOSPIM_P1_IO3 and FMC_D12. |
| 47 | PB10 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX and LPUART1_RX. |
| 48 | PB11 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX and DSI_TE. |
| 49 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 50 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
| 51 | PB12 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1 and USART3_CK. |
| 52 | PB13 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS_NSS and LPUART1_CTS. |
| 53 | PB14 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM1_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2 and USART3_RTS_DE. |
| 54 | PB15 | bidirectional | 5 V-tolerant FT I/O; alternate functions include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, DFSDM1_CKIN2 and TIM15_CH2. |
| 55 | PD8 | bidirectional | 5 V-tolerant FT I/O; alternate functions include USART3_TX, DCMI_HSYNC, LCD_R3 and FMC_D13. |
| 56 | PD9 | bidirectional | 5 V-tolerant FT I/O; alternate functions include USART3_RX, DCMI_PIXCLK, LCD_R4, FMC_D14 and SAI2_MCLK_A. |
| 57 | PD10 | bidirectional | 5 V-tolerant FT I/O; alternate functions include USART3_CK, TSC_G6_IO1, LCD_R5, FMC_D15 and SAI2_SCK_A. |
| 58 | PD11 | bidirectional | 5 V-tolerant FT I/O; alternate functions include I2C4_SMBA, USART3_CTS_NSS, TSC_G6_IO2, LCD_R6, FMC_A16 and LPTIM2_ETR. |
| 59 | PD12 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH1, I2C4_SCL, USART3_RTS_DE, LCD_R7 and FMC_A17. |
| 60 | PD13 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH2, I2C4_SDA, TSC_G6_IO4, FMC_A18 and LPTIM2_OUT. |
| 61 | PD14 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM4_CH3, LCD_B2 and FMC_D0. |
| 62 | PD15 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM4_CH4, LCD_B3 and FMC_D1. |
| 63 | PC6 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, DCMI_D0, LCD_R0 and SAI2_MCLK_A. |
| 64 | PC7 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, DCMI_D1, LCD_R1 and SAI2_MCLK_B. |
| 65 | PC8 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM3_CH3, TIM8_CH3, TSC_G4_IO3, DCMI_D2 and SDMMC1_D0. |
| 66 | PC9 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TRACED0, TIM8_BKIN2, TIM3_CH4, TIM8_CH4, DCMI_D3 and OTG_FS_NOE. |
| 67 | PA8 | bidirectional | 5 V-tolerant FT_f I/O with Fm+ capability; alternate functions include MCO, TIM1_CH1, SAI1_CK2, USART1_CK and LPTIM2_OUT. |
| 68 | PA9 | bidirectional | 5 V-tolerant FT_flu I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH2, SPI2_SCK, DCMI_D0, USART1_TX and OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5 V-tolerant FT_flu I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH3, SAI1_D1, DCMI_D1, USART1_RX and OTG_FS_ID. |
| 70 | PA11 | bidirectional | 5 V-tolerant FT_u I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS_NSS, CAN1_RX and OTG_FS_DM. |
| 71 | PA12 | bidirectional | 5 V-tolerant FT_u I/O with USB function supplied by VDDUSB; alternate functions include TIM1_ETR, SPI1_MOSI, USART1_RTS_DE, CAN1_TX and OTG_FS_DP. |
| 72 | PA13 | bidirectional | 5 V-tolerant FT I/O that after reset is the JTMS/SWDIO debug function, with the internal pull-up active; also IR_OUT and OTG_FS_NOE as alternate functions. |
| 73 | VDDUSB | power_in | Independent USB transceiver supply, 3.0 V to 3.6 V when USB is used. |
| 74 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 75 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
| 76 | PA14 | bidirectional | 5 V-tolerant FT I/O that after reset is the JTCK/SWCLK debug function, with the internal pull-down active; also LPTIM1_OUT and I2C1_SMBA as alternate functions. |
| 77 | PA15 (JTDI) | bidirectional | 5 V-tolerant FT I/O that after reset is the JTDI debug function, with the internal pull-up active; also TIM2_CH1, USART2_RX and SPI1_NSS as alternate functions. |
| 78 | PC10 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED1, SPI3_SCK, USART3_TX, UART4_TX and DCMI_D8. |
| 79 | PC11 | bidirectional | 5 V-tolerant FT I/O; alternate functions include DCMI_D2, OCTOSPIM_P1_NCS, SPI3_MISO, USART3_RX and UART4_RX. |
| 80 | PC12 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED3, SPI3_MOSI, USART3_CK, UART5_TX and DCMI_D9. |
| 81 | PD0 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SPI2_NSS, DFSDM1_DATIN7, CAN1_RX, LCD_B4 and FMC_D2. |
| 82 | PD1 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SPI2_SCK, DFSDM1_CKIN7, CAN1_TX, LCD_B5 and FMC_D3. |
| 83 | PD2 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TRACED2, TIM3_ETR, USART3_RTS_DE, UART5_RX and SDMMC1_CMD. |
| 84 | PD3 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SPI2_SCK, DCMI_D5, SPI2_MISO, USART2_CTS_NSS, LCD_CLK and FMC_CLK. |
| 85 | PD4 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, OCTOSPIM_P1_IO4 and FMC_NOE. |
| 86 | PD5 | bidirectional | 5 V-tolerant FT I/O; alternate functions include USART2_TX, OCTOSPIM_P1_IO5, FMC_NWE and EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V-tolerant FT I/O; alternate functions include SAI1_D1, DCMI_D10, SPI3_MOSI, DFSDM1_DATIN1, USART2_RX and FMC_NWAIT. |
| 88 | PD7 | bidirectional | 5 V-tolerant FT I/O; alternate functions include DFSDM1_CKIN1, USART2_CK, OCTOSPIM_P1_IO7 and FMC_NCE/FMC_NE1. |
| 89 | PB3 | bidirectional | 5 V-tolerant FT_la I/O that after reset is the JTDO/TRACESWO debug function; also TIM2_CH2, SPI1_SCK and SPI3_SCK as alternate functions and COMP2_INM as analog input. |
| 90 | PB4 | bidirectional | 5 V-tolerant FT_fa I/O that after reset is the NJTRST debug function, with the internal pull-up active; also TIM3_CH1, SPI1_MISO and COMP2_INP. |
| 91 | PB5 | bidirectional | 5 V-tolerant FT_la I/O; alternate functions include LPTIM1_IN1, TIM3_CH2, SPI1_MOSI, SPI3_MOSI, USART1_CK and COMP2_OUT. |
| 92 | PB6 | bidirectional | 5 V-tolerant FT_fa I/O; alternate functions include LPTIM1_ETR, TIM4_CH1, I2C1_SCL, USART1_TX and DCMI_D5, with COMP2_INP as analog input. |
| 93 | PB7 | bidirectional | 5 V-tolerant FT_fla I/O; alternate functions include LPTIM1_IN2, TIM4_CH2, I2C1_SDA, USART1_RX, DCMI_VSYNC and FMC_NL, with PVD_IN and COMP2_INM as analog inputs. |
| 94 | PH3-BOOT0 | bidirectional | 5 V-tolerant FT I/O (PH3) that also serves as the dedicated BOOT0 pin; the input voltage on BOOT0 may reach 9 V. |
| 95 | PB8 | bidirectional | 5 V-tolerant FT_fl I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH3, SAI1_CK1, I2C1_SCL, DCMI_D6 and SDMMC1_D4. |
| 96 | PB9 | bidirectional | 5 V-tolerant FT_fl I/O; alternate functions include IR_OUT, TIM4_CH4, SAI1_D2, I2C1_SDA, SPI2_NSS and CAN1_TX. |
| 97 | PE0 | bidirectional | 5 V-tolerant FT I/O; alternate functions include TIM4_ETR, DCMI_D2, LCD_HSYNC, FMC_NBL0 and TIM16_CH1. |
| 98 | PE1 | bidirectional | 5 V-tolerant FT I/O; alternate functions include DCMI_D3, LCD_VSYNC, FMC_NBL1 and TIM17_CH1. |
| 99 | VSS | power_in | Ground pin; all VSS pins must be connected to the ground supply. |
| 100 | VDD | power_in | Main digital and I/O supply, 1.71 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage | VDDX - VSS | -0.3 | | 4 | V | including VDD, VDDA, VDDIO2, VDDUSB, VBAT, VREF+ | 139 |
| Input voltage on FT_xxx pins | VIN | -0.3 | | | V | VSS-0.3 to min(VDD, VDDA, VDDIO2, VDDUSB)+4.0 | 139 |
| Input voltage on TT_xx pins | VIN | -0.3 | | 4 | V | | 139 |
| Input voltage on BOOT0 pin | VIN | 0 | | 9 | V | VSS to 9.0 | 139 |
| Total current into all VDD lines | ΣIVDD | | | 200 | mA | source | 139 |
| Total current out of all VSS lines | ΣIVSS | | | 200 | mA | sink | 139 |
| Max current into each VDD pin | IVDD(PIN) | | | 100 | mA | source | 139 |
| Max current out of each VSS pin | IVSS(PIN) | | | 100 | mA | sink | 139 |
| Output current sunk by any I/O | IIO(PIN) | | | 20 | mA | any I/O and control pin except FT_f | 139 |
| Total output current sunk by all I/Os | ΣIIO(PIN) | | | 100 | mA | | 139 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 140 |
| Maximum junction temperature | TJ | | | 150 | °C | | 140 |
| Internal AHB clock frequency | fHCLK | 0 | | 120 | MHz | | 140 |
| Standard operating voltage | VDD | 1.71 | | 3.6 | V | | 140 |
| PG[15:2] I/Os supply voltage | VDDIO2 | 1.08 | | 3.6 | V | At least one I/O in PG[15:2] used | 140 |
| Analog supply voltage | VDDA | 1.62 | | 3.6 | V | ADC or COMP used | 140 |
| Backup operating voltage | VBAT | 1.55 | | 3.6 | V | | 140 |
| USB supply voltage | VDDUSB | 3 | | 3.6 | V | USB used | 141 |
| Power dissipation LQFP100 | PD | | | 476 | mW | TA = 85 °C for suffix 6 | 141 |
| Ambient temperature suffix 6 | TA | -40 | | 85 | °C | Maximum power dissipation | 141 |
| Junction temperature suffix 6 | TJ | -40 | | 105 | °C | Suffix 6 version | 141 |
| VDD fall time rate | tVDD | 10 | | | µs/V | VDD fall time rate | 142 |
| Reset temporization after BOR0 | tRSTTEMPO | | 250 | 400 | µs | VDD rising | 142 |
| Brown-out reset threshold 0 | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 142 |
| Brown-out reset threshold 1 | VBOR1 | 2.06 | 2.1 | 2.14 | V | Rising edge | 142 |
| Brown-out reset threshold 4 | VBOR4 | 2.85 | 2.9 | 2.95 | V | Rising edge | 142 |
| BOR (except BOR0) and PVD consumption from VDD | IDD(BOR_PVD) | | 1.1 | 1.6 | µA | | 143 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 144 |
| Average temperature coefficient of VREFINT | TCoeff | | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 144 |
| Supply current in Run mode, Range 1 Boost | IDD(Run) | | 18.5 | 21 | mA | 120 MHz, 25°C, single bank, ART enable, fHSE bypass, PLL ON | 147 |
| Supply current in Run mode, Range 1 Boost, 85°C | IDD(Run) | | 21 | 26 | mA | 120 MHz, 85°C, single bank, ART enable | 147 |
| Supply current in Stop 2 mode, RTC disabled | IDD(Stop 2) | | 2.55 | 8 | µA | VDD = 3 V, 25°C | 168 |
| Supply current in Stop 0 mode | IDD(Stop 0) | | 295 | 570 | µA | VDD = 3 V, 25°C, RTC disabled | 171 |
| Supply current in Standby mode | IDD(Standby) | | 150 | 370 | nA | VDD = 3 V, 25°C, RTC disabled, no independent watchdog | 171 |
## CAD (KiCad official)
- Symbol: `STM32L4R7VIT6`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `stm32l4r7vit6-etched.step` / `stm32l4r7vit6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l4r7vit6.step` / `stm32l4r7vit6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32l4r7vit6.pdf) (307 pp, sha256 `049cc34598b1e11a`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l4r7vit6-datasheet.pdf)