component
STM32L4R5ZIT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-144(20x20). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32L4R5ZIT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-144(20x20)
STM32L4R5ZIT6 from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant I/O (FT_l, LCD function supplied by VLCD). Alternate functions: TRACECK, TIM3_ETR, SAI1_CK1, TSC_G7_IO1, LCD_R0, FMC_A23, SAI1_MCLK_A, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant I/O (FT_l, LCD function supplied by VLCD). Alternate functions: TRACED0, TIM3_CH1, OCTOSPIM_P1_DQS, TSC_G7_IO2, LCD_R1, FMC_A19, SAI1_SD_B, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TRACED1, TIM3_CH2, SAI1_D2, DFSDM1_DATIN3, TSC_G7_IO3, DCMI_D4, LCD_B0, FMC_A20, SAI1_FS_A, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TRACED2, TIM3_CH3, SAI1_CK2, DFSDM1_CKIN3, TSC_G7_IO4, DCMI_D6, LCD_G0, FMC_A21, SAI1_SCK_A, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TRACED3, TIM3_CH4, SAI1_D1, DCMI_D7, LCD_G1, FMC_A22, SAI1_SD_A, EVENTOUT; additional functions RTC_TAMP3, WKUP3. |
| 6 | VBAT | power_in | Backup supply, 1.55 V to 3.6 V, for the RTC, the external 32 kHz oscillator and the backup registers when VDD is not present. |
| 7 | PC13 | bidirectional | 5 V-tolerant I/O supplied through the power switch, which sinks only 3 mA: output speed must not exceed 2 MHz with a 30 pF maximum load and the pin must not be used as a current source. Additional functions: RTC_TAMP1/RTC_TS/RTC_OUT, WKUP2. |
| 8 | PC14-OSC32_IN | bidirectional | 5 V-tolerant I/O supplied through the power switch (same limits as PC13: 3 mA sink, 2 MHz maximum speed with 30 pF load, no current-source use); also OSC32_IN for the 32 kHz crystal. |
| 9 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant I/O supplied through the power switch (same limits as PC13: 3 mA sink, 2 MHz maximum speed with 30 pF load, no current-source use); also OSC32_OUT for the 32 kHz crystal. |
| 10 | PF0 | bidirectional | 5 V-tolerant I/O, Fm+ capable (FT_f). Alternate functions: I2C2_SDA, OCTOSPIM_P2_IO0, FMC_A0, EVENTOUT. |
| 11 | PF1 | bidirectional | 5 V-tolerant I/O, Fm+ capable (FT_f). Alternate functions: I2C2_SCL, OCTOSPIM_P2_IO1, FMC_A1, EVENTOUT. |
| 12 | PF2 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: I2C2_SMBA, OCTOSPIM_P2_IO2, FMC_A2, EVENTOUT. |
| 13 | PF3 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: OCTOSPIM_P2_IO3, FMC_A3, EVENTOUT. |
| 14 | PF4 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: OCTOSPIM_P2_CLK, FMC_A4, EVENTOUT. |
| 15 | PF5 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: FMC_A5, EVENTOUT. |
| 16 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 17 | VDD | power_in | Main supply, 1.71 V to 3.6 V, for the I/Os, the internal regulator and the system analog blocks. |
| 18 | PF6 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM5_ETR, TIM5_CH1, OCTOSPIM_P1_IO3, SAI1_SD_B, EVENTOUT. |
| 19 | PF7 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM5_CH2, OCTOSPIM_P1_IO2, SAI1_MCLK_B, EVENTOUT. |
| 20 | PF8 | bidirectional | 5 V-tolerant I/O (FT, see note 3 on non-bonded NC GPIOs in other packages). Alternate functions: TIM5_CH3, OCTOSPIM_P1_IO0, SAI1_SCK_B, EVENTOUT. |
| 21 | PF9 | bidirectional | 5 V-tolerant I/O (FT, see note 3 on non-bonded NC GPIOs in other packages). Alternate functions: TIM5_CH4, OCTOSPIM_P1_IO1, SAI1_FS_B, TIM15_CH1, EVENTOUT. |
| 22 | PF10 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: OCTOSPIM_P1_CLK, DFSDM1_CKOUT, DCMI_D11, SAI1_D3, TIM15_CH2, EVENTOUT. |
| 23 | PH0-OSC_IN | bidirectional | 5 V-tolerant I/O (FT); also OSC_IN, the high-speed oscillator input. Alternate function: EVENTOUT. |
| 24 | PH1-OSC_OUT | bidirectional | 5 V-tolerant I/O (FT); also OSC_OUT, the high-speed oscillator output. Alternate function: EVENTOUT. |
| 25 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 26 | PC0 | bidirectional | 5 V-tolerant I/O (FT_fla: Fm+ capable, LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: LPTIM1_IN1, I2C3_SCL, DFSDM1_DATIN4, LPUART1_RX, SAI2_FS_A, LPTIM2_IN1, EVENTOUT; additional function ADC1_IN1. |
| 27 | PC1 | bidirectional | 5 V-tolerant I/O (FT_fla: Fm+ capable, LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: TRACED0, LPTIM1_OUT, SPI2_MOSI, I2C3_SDA, DFSDM1_CKIN4, LPUART1_TX, OCTOSPIM_P1_IO4, SAI1_SD_A, EVENTOUT; additional function ADC1_IN2. |
| 28 | PC2 | bidirectional | 5 V-tolerant I/O (FT_la: LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT, OCTOSPIM_P1_IO5, EVENTOUT; additional function ADC1_IN3. |
| 29 | PC3 | bidirectional | 5 V-tolerant I/O (FT_a: analog switch supplied by VDDA). Alternate functions: LPTIM1_ETR, SAI1_D1, SPI2_MOSI, OCTOSPIM_P1_IO6, SAI1_SD_A, LPTIM2_ETR, EVENTOUT; additional function ADC1_IN4. |
| 30 | VSSA | power_in | Analog ground pin for the ADCs, DACs, OPAMPs, COMPs and voltage reference buffer. |
| 31 | VREF- | power_in | Negative reference voltage for the ADC and DAC; VREF- must always be equal to VSSA. |
| 32 | VREF+ | power_in | Positive reference voltage for the ADC and DAC: must be between 2 V and VDDA when VDDA is 2 V or higher, and equal to VDDA when VDDA is below 2 V; it is also the output of the internal voltage reference buffer (VREFBUF_OUT) when enabled. |
| 33 | VDDA | power_in | Analog supply: 1.62 V (ADC/COMP) or 1.8 V (DAC/OPAMP) to 3.6 V, with 2.4 V minimum when the voltage reference buffer is used. |
| 34 | PA0 | bidirectional | 5 V-tolerant I/O (FT_a: analog switch supplied by VDDA). Alternate functions: TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS_NSS, UART4_TX, SAI1_EXTCLK, TIM2_ETR, EVENTOUT; additional functions OPAMP1_VINP, ADC1_IN5, RTC_TAMP2, WKUP1. |
| 35 | PA1 | bidirectional | 5 V-tolerant I/O (FT_la: LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: TIM2_CH2, TIM5_CH2, I2C1_SMBA, SPI1_SCK, USART2_RTS_DE, UART4_RX, OCTOSPIM_P1_DQS, TIM15_CH1N, EVENTOUT; additional functions OPAMP1_VINM, ADC1_IN6. |
| 36 | PA2 | bidirectional | 5 V-tolerant I/O (FT_la: LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: TIM2_CH3, TIM5_CH3, USART2_TX, LPUART1_TX, OCTOSPIM_P1_NCS, SAI2_EXTCLK, TIM15_CH1, EVENTOUT; additional functions ADC1_IN7, WKUP4/LSCO. |
| 37 | PA3 | bidirectional | 3.6 V-tolerant I/O (TT_a: analog switch supplied by VDDA). Alternate functions: TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX, LPUART1_RX, OCTOSPIM_P1_CLK, SAI1_MCLK_A, TIM15_CH2, EVENTOUT; additional functions OPAMP1_VOUT, ADC1_IN8. |
| 38 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 39 | VDD | power_in | Main supply, 1.71 V to 3.6 V, for the I/Os, the internal regulator and the system analog blocks. |
| 40 | PA4 | bidirectional | 3.6 V-tolerant I/O (TT_a: analog switch supplied by VDDA). Alternate functions: OCTOSPIM_P1_NCS, SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC, SAI1_FS_B, LPTIM2_OUT, EVENTOUT; additional functions ADC1_IN9, DAC1_OUT1. |
| 41 | PA5 | bidirectional | 3.6 V-tolerant I/O (TT_a: analog switch supplied by VDDA). Alternate functions: TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK, LPTIM2_ETR, EVENTOUT; additional functions ADC1_IN10, DAC1_OUT2. |
| 42 | PA6 | bidirectional | 5 V-tolerant I/O (FT_a: analog switch supplied by VDDA). Alternate functions: TIM1_BKIN, TIM3_CH1, TIM8_BKIN, DCMI_PIXCLK, SPI1_MISO, USART3_CTS_NSS, LPUART1_CTS, OCTOSPIM_P1_IO3, TIM16_CH1, EVENTOUT; additional functions OPAMP2_VINP, ADC1_IN11. |
| 43 | PA7 | bidirectional | 5 V-tolerant I/O (FT_fla: Fm+ capable, LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: TIM1_CH1N, TIM3_CH2, TIM8_CH1N, I2C3_SCL, SPI1_MOSI, OCTOSPIM_P1_IO2, TIM17_CH1, EVENTOUT; additional functions OPAMP2_VINM, ADC1_IN12. |
| 44 | PC4 | bidirectional | 5 V-tolerant I/O (FT_a: analog switch supplied by VDDA). Alternate functions: USART3_TX, OCTOSPIM_P1_IO7, EVENTOUT; additional functions COMP1_INM, ADC1_IN13. |
| 45 | PC5 | bidirectional | 5 V-tolerant I/O (FT_a: analog switch supplied by VDDA). Alternate functions: SAI1_D3, USART3_RX, EVENTOUT; additional functions COMP1_INP, ADC1_IN14, WKUP5. |
| 46 | PB0 | bidirectional | 3.6 V-tolerant I/O (TT_la: LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: TIM1_CH2N, TIM3_CH3, TIM8_CH2N, SPI1_NSS, USART3_CK, OCTOSPIM_P1_IO1, COMP1_OUT, SAI1_EXTCLK, EVENTOUT; additional functions OPAMP2_VOUT, ADC1_IN15. |
| 47 | PB1 | bidirectional | 5 V-tolerant I/O (FT_a: analog switch supplied by VDDA). Alternate functions: TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN0, USART3_RTS_DE, LPUART1_RTS_DE, OCTOSPIM_P1_IO0, LPTIM2_IN1, EVENTOUT; additional functions COMP1_INM, ADC1_IN16. |
| 48 | PB2 | bidirectional | 5 V-tolerant I/O (FT_a: analog switch supplied by VDDA). Alternate functions: RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0, OCTOSPIM_P1_DQS, LCD_B1, EVENTOUT; additional function COMP1_INP. |
| 49 | PF11 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: LCD_DE, DCMI_D12, DSI_TE, EVENTOUT. |
| 50 | PF12 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: OCTOSPIM_P2_DQS, LCD_B0, FMC_A6, EVENTOUT. |
| 51 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 52 | VDD | power_in | Main supply, 1.71 V to 3.6 V, for the I/Os, the internal regulator and the system analog blocks. |
| 53 | PF13 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: I2C4_SMBA, DFSDM1_DATIN6, LCD_B1, FMC_A7, EVENTOUT. |
| 54 | PF14 | bidirectional | 5 V-tolerant I/O, Fm+ capable (FT_f). Alternate functions: I2C4_SCL, DFSDM1_CKIN6, TSC_G8_IO1, LCD_G0, FMC_A8, EVENTOUT. |
| 55 | PF15 | bidirectional | 5 V-tolerant I/O, Fm+ capable (FT_f). Alternate functions: I2C4_SDA, TSC_G8_IO2, LCD_G1, FMC_A9, EVENTOUT. |
| 56 | PG0 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: OCTOSPIM_P2_IO4, TSC_G8_IO3, FMC_A10, EVENTOUT. |
| 57 | PG1 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: OCTOSPIM_P2_IO5, TSC_G8_IO4, FMC_A11, EVENTOUT. |
| 58 | PE7 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_ETR, DFSDM1_DATIN2, LCD_B6, FMC_D4, SAI1_SD_B, EVENTOUT. |
| 59 | PE8 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_CH1N, DFSDM1_CKIN2, LCD_B7, FMC_D5, SAI1_SCK_B, EVENTOUT. |
| 60 | PE9 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_CH1, DFSDM1_CKOUT, LCD_G2, FMC_D6, SAI1_FS_B, EVENTOUT. |
| 61 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 62 | VDD | power_in | Main supply, 1.71 V to 3.6 V, for the I/Os, the internal regulator and the system analog blocks. |
| 63 | PE10 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, OCTOSPIM_P1_CLK, LCD_G3, FMC_D7, SAI1_MCLK_B, EVENTOUT. |
| 64 | PE11 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, OCTOSPIM_P1_NCS, LCD_G4, FMC_D8, EVENTOUT. |
| 65 | PE12 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3, OCTOSPIM_1_IO0 (as printed in Table 15), LCD_G5, FMC_D9, EVENTOUT. |
| 66 | PE13 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4, OCTOSPIM_P1_IO1, LCD_G6, FMC_D10, EVENTOUT. |
| 67 | PE14 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_CH4, TIM1_BKIN2, SPI1_MISO, OCTOSPIM_P1_IO2, LCD_G7, FMC_D11, EVENTOUT. |
| 68 | PE15 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_BKIN, SPI1_MOSI, OCTOSPIM_P1_IO3, LCD_R2, FMC_D12, EVENTOUT. |
| 69 | PB10 | bidirectional | 5 V-tolerant I/O (FT_fl: Fm+ capable, LCD function supplied by VLCD). Alternate functions: TIM2_CH3, I2C4_SCL, I2C2_SCL, SPI2_SCK, DFSDM1_DATIN7, USART3_TX, LPUART1_RX, TSC_SYNC, OCTOSPIM_P1_CLK, COMP1_OUT, SAI1_SCK_A, EVENTOUT. |
| 70 | PB11 | bidirectional | 5 V-tolerant I/O (FT_fl: Fm+ capable, LCD function supplied by VLCD). Alternate functions: TIM2_CH4, I2C4_SDA, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, LPUART1_TX, OCTOSPIM_P1_NCS, DSI_TE, COMP2_OUT, EVENTOUT. |
| 71 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 72 | VDD | power_in | Main supply, 1.71 V to 3.6 V, for the I/Os, the internal regulator and the system analog blocks. |
| 73 | PB12 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM1_BKIN, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1, USART3_CK, LPUART1_RTS_DE, TSC_G1_IO1, SAI2_FS_A, TIM15_BKIN, EVENTOUT. |
| 74 | PB13 | bidirectional | 5 V-tolerant I/O (FT_fl: Fm+ capable, LCD function supplied by VLCD). Alternate functions: TIM1_CH1N, I2C2_SCL, SPI2_SCK, DFSDM1_CKIN1, USART3_CTS_NSS, LPUART1_CTS, TSC_G1_IO2, SAI2_SCK_A, TIM15_CH1N, EVENTOUT. |
| 75 | PB14 | bidirectional | 5 V-tolerant I/O (FT_fl: Fm+ capable, LCD function supplied by VLCD). Alternate functions: TIM1_CH2N, TIM8_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS_DE, TSC_G1_IO3, SAI2_MCLK_A, TIM15_CH1, EVENTOUT. |
| 76 | PB15 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, DFSDM1_CKIN2, TSC_G1_IO4, SAI2_SD_A, TIM15_CH2, EVENTOUT. |
| 77 | PD8 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: USART3_TX, DCMI_HSYNC, LCD_R3, FMC_D13, EVENTOUT. |
| 78 | PD9 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: USART3_RX, DCMI_PIXCLK, LCD_R4, FMC_D14, SAI2_MCLK_A, EVENTOUT. |
| 79 | PD10 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: USART3_CK, TSC_G6_IO1, LCD_R5, FMC_D15, SAI2_SCK_A, EVENTOUT. |
| 80 | PD11 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: I2C4_SMBA, USART3_CTS_NSS, TSC_G6_IO2, LCD_R6, FMC_A16, SAI2_SD_A, LPTIM2_ETR, EVENTOUT. |
| 81 | PD12 | bidirectional | 5 V-tolerant I/O (FT_fl: Fm+ capable, LCD function supplied by VLCD). Alternate functions: TIM4_CH1, I2C4_SCL, USART3_RTS_DE, TSC_G6_IO3, LCD_R7, FMC_A17, SAI2_FS_A, LPTIM2_IN1, EVENTOUT. |
| 82 | PD13 | bidirectional | 5 V-tolerant I/O (FT_fl: Fm+ capable, LCD function supplied by VLCD). Alternate functions: TIM4_CH2, I2C4_SDA, TSC_G6_IO4, FMC_A18, LPTIM2_OUT, EVENTOUT. |
| 83 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 84 | VDD | power_in | Main supply, 1.71 V to 3.6 V, for the I/Os, the internal regulator and the system analog blocks. |
| 85 | PD14 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM4_CH3, LCD_B2, FMC_D0, EVENTOUT. |
| 86 | PD15 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM4_CH4, LCD_B3, FMC_D1, EVENTOUT. |
| 87 | PG2 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: SPI1_SCK, FMC_A12, SAI2_SCK_B, EVENTOUT. |
| 88 | PG3 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: SPI1_MISO, FMC_A13, SAI2_FS_B, EVENTOUT. |
| 89 | PG4 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: SPI1_MOSI, FMC_A14, SAI2_MCLK_B, EVENTOUT. |
| 90 | PG5 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: SPI1_NSS, LPUART1_CTS, FMC_A15, SAI2_SD_B, EVENTOUT. |
| 91 | PG6 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: OCTOSPIM_P1_DQS, I2C3_SMBA, LPUART1_RTS_DE, LCD_R1, DSI_TE, EVENTOUT. |
| 92 | PG7 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 (FT_fs, Fm+ capable). Alternate functions: SAI1_CK1, I2C3_SCL, OCTOSPIM_P2_DQS, DFSDM1_CKOUT, LPUART1_TX, FMC_INT, SAI1_MCLK_A, EVENTOUT. |
| 93 | PG8 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 (FT_fs, Fm+ capable). Alternate functions: I2C3_SDA, LPUART1_RX, EVENTOUT. |
| 94 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 95 | VDDIO2 | power_in | Supply for the 14 I/Os of port PG[15:2], 1.08 V to 3.6 V when at least one of them is used. |
| 96 | PC6 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, SDMMC1_D0DIR, TSC_G4_IO1, DCMI_D0, LCD_R0, SDMMC1_D6, SAI2_MCLK_A, EVENTOUT. |
| 97 | PC7 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, SDMMC1_D123DIR, TSC_G4_IO2, DCMI_D1, LCD_R1, SDMMC1_D7, SAI2_MCLK_B, EVENTOUT. |
| 98 | PC8 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM3_CH3, TIM8_CH3, TSC_G4_IO3, DCMI_D2, SDMMC1_D0, EVENTOUT. |
| 99 | PC9 | bidirectional | 5 V-tolerant I/O (FT_fl: Fm+ capable, LCD function supplied by VLCD). Alternate functions: TRACED0, TIM8_BKIN2, TIM3_CH4, TIM8_CH4, DCMI_D3, I2C3_SDA, TSC_G4_IO4, OTG_FS_NOE, SDMMC1_D1, SAI2_EXTCLK, EVENTOUT. |
| 100 | PA8 | bidirectional | 5 V-tolerant I/O (FT_f: Fm+ capable). Alternate functions: MCO, TIM1_CH1, SAI1_CK2, USART1_CK, OTG_FS_SOF, SAI1_SCK_A, LPTIM2_OUT, EVENTOUT. |
| 101 | PA9 | bidirectional | 5 V-tolerant I/O (FT_flu: Fm+ capable, LCD function supplied by VLCD, USB function supplied by VDDUSB). Alternate functions: TIM1_CH2, SPI2_SCK, DCMI_D0, USART1_TX, SAI1_FS_A, TIM15_BKIN, EVENTOUT; additional function OTG_FS_VBUS. |
| 102 | PA10 | bidirectional | 5 V-tolerant I/O (FT_flu: Fm+ capable, LCD function supplied by VLCD, USB function supplied by VDDUSB). Alternate functions: TIM1_CH3, SAI1_D1, DCMI_D1, USART1_RX, OTG_FS_ID, SAI1_SD_A, TIM17_BKIN, EVENTOUT. |
| 103 | PA11 | bidirectional | 5 V-tolerant I/O (FT_u: USB function supplied by VDDUSB). Alternate functions: TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS_NSS, CAN1_RX, OTG_FS_DM, EVENTOUT. |
| 104 | PA12 | bidirectional | 5 V-tolerant I/O (FT_u: USB function supplied by VDDUSB). Alternate functions: TIM1_ETR, SPI1_MOSI, USART1_RTS_DE, CAN1_TX, OTG_FS_DP, EVENTOUT. |
| 105 | PA13 | bidirectional | 5 V-tolerant I/O (FT), JTMS/SWDIO debug function after reset with internal pull-up enabled (note 4). Alternate functions: IR_OUT, OTG_FS_NOE, SAI1_SD_B, EVENTOUT. |
| 106 | VDDUSB | power_in | USB transceiver supply, 3.0 V to 3.6 V when USB is used. |
| 107 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 108 | VDD | power_in | Main supply, 1.71 V to 3.6 V, for the I/Os, the internal regulator and the system analog blocks. |
| 109 | PA14 | bidirectional | 5 V-tolerant I/O (FT), JTCK/SWCLK debug function after reset with internal pull-down enabled (note 4). Alternate functions: JTCK/SWCLK, LPTIM1_OUT, I2C1_SMBA, I2C4_SMBA, OTG_FS_SOF, SAI1_FS_B, EVENTOUT. |
| 110 | PA15 (JTDI) | bidirectional | 5 V-tolerant I/O (FT), JTDI debug function after reset with internal pull-up enabled (note 4). Alternate functions: JTDI, TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS, SPI3_NSS, USART3_RTS_DE, UART4_RTS_DE, TSC_G3_IO1, SAI2_FS_B, EVENTOUT. |
| 111 | PC10 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TRACED1, SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, DCMI_D8, SDMMC1_D2, SAI2_SCK_B, EVENTOUT. |
| 112 | PC11 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: DCMI_D2, OCTOSPIM_P1_NCS, SPI3_MISO, USART3_RX, UART4_RX, TSC_G3_IO3, DCMI_D4, SDMMC1_D3, SAI2_MCLK_B, EVENTOUT. |
| 113 | PC12 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, TSC_G3_IO4, DCMI_D9, SDMMC1_CK, SAI2_SD_B, EVENTOUT. |
| 114 | PD0 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: SPI2_NSS, DFSDM1_DATIN7, CAN1_RX, LCD_B4, FMC_D2, EVENTOUT. |
| 115 | PD1 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: SPI2_SCK, DFSDM1_CKIN7, CAN1_TX, LCD_B5, FMC_D3, EVENTOUT. |
| 116 | PD2 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TRACED2, TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, DCMI_D11, SDMMC1_CMD, EVENTOUT. |
| 117 | PD3 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: SPI2_SCK, DCMI_D5, SPI2_MISO, DFSDM1_DATIN0, USART2_CTS_NSS, OCTOSPIM_P2_NCS, LCD_CLK, FMC_CLK, EVENTOUT. |
| 118 | PD4 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, OCTOSPIM_P1_IO4, FMC_NOE, EVENTOUT. |
| 119 | PD5 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: USART2_TX, OCTOSPIM_P1_IO5, FMC_NWE, EVENTOUT. |
| 120 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 121 | VDD | power_in | Main supply, 1.71 V to 3.6 V, for the I/Os, the internal regulator and the system analog blocks. |
| 122 | PD6 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: SAI1_D1, DCMI_D10, SPI3_MOSI, DFSDM1_DATIN1, USART2_RX, OCTOSPIM_P1_IO6, LCD_DE, FMC_NWAIT, SAI1_SD_A, EVENTOUT. |
| 123 | PD7 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: DFSDM1_CKIN1, USART2_CK, OCTOSPIM_P1_IO7, FMC_NCE/FMC_NE1, EVENTOUT. |
| 124 | PG9 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: OCTOSPIM_P2_IO6, SPI3_SCK, USART1_TX, FMC_NCE/FMC_NE2, SAI2_SCK_A, TIM15_CH1N, EVENTOUT. |
| 125 | PG10 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: LPTIM1_IN1, OCTOSPIM_P2_IO7, SPI3_MISO, USART1_RX, FMC_NE3, SAI2_FS_A, TIM15_CH1, EVENTOUT. |
| 126 | PG11 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: LPTIM1_IN2, OCTOSPIM_P1_IO5, SPI3_MOSI, USART1_CTS_NSS, SAI2_MCLK_A, TIM15_CH2, EVENTOUT. |
| 127 | PG12 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: LPTIM1_ETR, OCTOSPIM_P2_NCS, SPI3_NSS, USART1_RTS_DE, FMC_NE4, SAI2_SD_A, EVENTOUT. |
| 128 | PG13 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 (FT_fs, Fm+ capable). Alternate functions: I2C1_SDA, USART1_CK, LCD_R0, FMC_A24, EVENTOUT. |
| 129 | PG14 | bidirectional | 5 V-tolerant I/O supplied by VDDIO2 (FT_fs, Fm+ capable). Alternate functions: I2C1_SCL, LCD_R1, FMC_A25, EVENTOUT. |
| 130 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 131 | VDDIO2 | power_in | Supply for the 14 I/Os of port PG[15:2], 1.08 V to 3.6 V when at least one of them is used. |
| 132 | PG15 | bidirectional | I/O supplied only by VDDIO2 (FT_s, 5 V-tolerant). Alternate functions: LPTIM1_OUT, I2C1_SMBA, OCTOSPIM_P2_DQS, DCMI_D13, EVENTOUT. |
| 133 | PB3 | bidirectional | 5 V-tolerant I/O (FT_la: LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: JTDO/TRACESWO, TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE, OTG_FS_CRS_SYNC, SAI1_SCK_B, EVENTOUT; additional function COMP2_INM. |
| 134 | PB4 | bidirectional | 5 V-tolerant I/O (FT_fa: Fm+ capable, analog switch supplied by VDDA), NJTRST debug function after reset with internal pull-up enabled (note 4). Alternate functions: NJTRST, TIM3_CH1, I2C3_SDA, SPI1_MISO, SPI3_MISO, USART1_CTS_NSS, UART5_RTS_DE, TSC_G2_IO1, DCMI_D12, SAI1_MCLK_B, TIM17_BKIN, EVENTOUT; additional function COMP2_INP. |
| 135 | PB5 | bidirectional | 5 V-tolerant I/O (FT_la: LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, UART5_CTS, TSC_G2_IO2, DCMI_D10, COMP2_OUT, SAI1_SD_B, TIM16_BKIN, EVENTOUT. |
| 136 | PB6 | bidirectional | 5 V-tolerant I/O (FT_fa: Fm+ capable, analog switch supplied by VDDA). Alternate functions: LPTIM1_ETR, TIM4_CH1, TIM8_BKIN2, I2C1_SCL, I2C4_SCL, DFSDM1_DATIN5, USART1_TX, TSC_G2_IO3, DCMI_D5, SAI1_FS_B, TIM16_CH1N, EVENTOUT; additional function COMP2_INP. |
| 137 | PB7 | bidirectional | 5 V-tolerant I/O (FT_fla: Fm+ capable, LCD function supplied by VLCD, analog switch supplied by VDDA). Alternate functions: LPTIM1_IN2, TIM4_CH2, TIM8_BKIN, I2C1_SDA, I2C4_SDA, DFSDM1_CKIN5, USART1_RX, UART4_CTS, TSC_G2_IO4, DCMI_VSYNC, DSI_TE, FMC_NL, TIM17_CH1N, EVENTOUT; additional functions COMP2_INM, PVD_IN. |
| 138 | PH3-BOOT0 | bidirectional | 5 V-tolerant I/O (FT) used as the BOOT0 pin; BOOT0 input voltage range is VSS to 9.0 V (Table 18). Alternate function: EVENTOUT. |
| 139 | PB8 | bidirectional | 5 V-tolerant I/O (FT_fl: Fm+ capable, LCD function supplied by VLCD). Alternate functions: TIM4_CH3, SAI1_CK1, I2C1_SCL, DFSDM1_CKOUT, DFSDM1_DATIN6, SDMMC1_CKIN, CAN1_RX, DCMI_D6, LCD_B1, SDMMC1_D4, SAI1_MCLK_A, TIM16_CH1, EVENTOUT. |
| 140 | PB9 | bidirectional | 5 V-tolerant I/O (FT_fl: Fm+ capable, LCD function supplied by VLCD). Alternate functions: IR_OUT, TIM4_CH4, SAI1_D2, I2C1_SDA, SPI2_NSS, DFSDM1_CKIN6, SDMMC1_CDIR, CAN1_TX, DCMI_D7, SDMMC1_D5, SAI1_FS_A, TIM17_CH1, EVENTOUT. |
| 141 | PE0 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: TIM4_ETR, DCMI_D2, LCD_HSYNC, FMC_NBL0, TIM16_CH1, EVENTOUT. |
| 142 | PE1 | bidirectional | 5 V-tolerant I/O (FT). Alternate functions: DCMI_D3, LCD_VSYNC, FMC_NBL1, TIM17_CH1, EVENTOUT. |
| 143 | VSS | power_in | Ground pin of the device; must be connected to the ground plane. |
| 144 | VDD | power_in | Main supply, 1.71 V to 3.6 V, for the I/Os, the internal regulator and the system analog blocks. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-144(20x20) |
| Category | Embedded Processors & Controllers |
| Pins | 144 |
CAD (KiCad official)
- Symbol:
STM32L4R5ZIT6 - Footprint:
Package_QFP:LQFP-144_20x20mm_P0.5mm - 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
- 3D model files:
stm32l4r5zit6-etched.step/stm32l4r5zit6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l4r5zit6.step/stm32l4r5zit6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (307 pp, sha256
049cc34598b1e11a, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).