component
STM32L4Q5RGT6
Public Made by Adomby adom
STMicroelectronics Microcontroller Units (MCUs/MPUs/SOCs), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32L4Q5RGT6
STMicroelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
STM32L4Q5RGT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup supply for RTC, 32 kHz oscillator and backup registers when VDD is absent (1.55 V to 3.6 V). |
| 2 | PC13 | bidirectional | FT I/O supplied via the backup power switch (max 3 mA, 2 MHz, 30 pF in output mode); additional functions RTC_TAMP1/RTC_TS/RTC_OUT and WKUP2. |
| 3 | PC14-OSC32_IN | bidirectional | FT I/O (PC14) supplied via the backup power switch; additional function OSC32_IN for the 32 kHz crystal. |
| 4 | PC15-OSC32_OUT | bidirectional | FT I/O (PC15) supplied via the backup power switch; additional function OSC32_OUT for the 32 kHz crystal. |
| 5 | PH0-OSC_IN | bidirectional | FT I/O (PH0) with additional function OSC_IN for the 4 to 48 MHz crystal oscillator. |
| 6 | PH1-OSC_OUT | bidirectional | FT I/O (PH1) with additional function OSC_OUT for the 4 to 48 MHz crystal oscillator. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | FT_fla I/O with alternate functions LPTIM1_IN1, I2C3_SCL, LPUART1_RX, SDMMC1_CMD, SAI2_FS_A and analog input ADC12_IN1. |
| 9 | PC1 | bidirectional | FT_fla I/O with alternate functions TRACED0, LPTIM1_OUT, SPI2_MOSI, I2C3_SDA, LPUART1_TX and analog input ADC12_IN2. |
| 10 | PC2 | bidirectional | FT_la I/O with alternate functions LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT, LCD_HSYNC and analog input ADC12_IN3. |
| 11 | PC3 | bidirectional | FT_a I/O with alternate functions LPTIM1_ETR, SAI1_D1, SPI2_MOSI, LPTIM2_ETR and analog input ADC12_IN4. |
| 12 | VSSA/VREF- | power_in | Analog ground, double-bonded with VREF-, which must always equal VSSA. |
| 13 | VDDA/VREF+ | power_in | Analog supply (1.62 V to 3.6 V) double-bonded with VREF+, so the internal voltage reference buffer is unavailable and must stay disabled. |
| 14 | PA0 | bidirectional | FT_a I/O with TIM2_CH1, TIM5_CH1, USART2_CTS_NSS, UART4_TX, plus OPAMP1_VINP, ADC12_IN5, RTC_TAMP2 and WKUP1. |
| 15 | PA1 | bidirectional | FT_la I/O with TIM2_CH2, TIM5_CH2, SPI1_SCK, USART2_RTS_DE, UART4_RX, plus OPAMP1_VINM and ADC12_IN6. |
| 16 | PA2 | bidirectional | FT_la I/O with TIM2_CH3, USART2_TX, LPUART1_TX, plus ADC12_IN7 and WKUP4/LSCO. |
| 17 | PA3 | bidirectional | TT_a I/O with TIM2_CH4, USART2_RX, LPUART1_RX, plus OPAMP1_VOUT and ADC12_IN8. |
| 18 | VSS | power_in | Digital ground. |
| 19 | VDD | power_in | Digital supply, 1.71 V to 3.6 V. |
| 20 | PA4 | bidirectional | TT_a I/O with SPI1_NSS, SPI3_NSS, USART2_CK, LCD_CLK, plus ADC12_IN9 and DAC1_OUT1. |
| 21 | PA5 | bidirectional | TT_a I/O with TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK, plus ADC12_IN10 and DAC1_OUT2. |
| 22 | PA6 | bidirectional | FT_a I/O with TIM1_BKIN, TIM3_CH1, SPI1_MISO, USART3_CTS_NSS, plus OPAMP2_VINP and ADC12_IN11. |
| 23 | PA7 | bidirectional | FT_fla I/O with TIM1_CH1N, TIM3_CH2, I2C3_SCL, SPI1_MOSI, plus OPAMP2_VINM and ADC12_IN12. |
| 24 | PC4 | bidirectional | FT_a I/O with USART3_TX, OCTOSPIM_P1_IO7, plus COMP1_INM and ADC12_IN13. |
| 25 | PC5 | bidirectional | FT_a I/O with SAI1_D3, USART3_RX, LCD_CLK, plus COMP1_INP, ADC12_IN14 and WKUP5 (not connected on the external SMPS variant). |
| 26 | PB0 | bidirectional | TT_la I/O with TIM1_CH2N, TIM3_CH3, SPI1_NSS, USART3_CK, COMP1_OUT, plus OPAMP2_VOUT and ADC12_IN15. |
| 27 | PB1 | bidirectional | FT_a I/O with TIM1_CH3N, TIM3_CH4, USART3_RTS_DE, LPUART1_RTS_DE, plus COMP1_INM and ADC12_IN16. |
| 28 | PB2 | bidirectional | FT_a I/O with RTC_OUT2, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0, plus COMP1_INP. |
| 29 | PB10 | bidirectional | FT_fl I/O with TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, LPUART1_RX, COMP1_OUT. |
| 30 | PB11 | bidirectional | FT_fl I/O with TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX, COMP2_OUT (not connected on the external SMPS variant). |
| 31 | VSS | power_in | Digital ground. |
| 32 | VDD | power_in | Digital supply, 1.71 V to 3.6 V. |
| 33 | PB12 | bidirectional | FT I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS, USART3_CK, SDMMC2_CK, SAI2_FS_A. |
| 34 | PB13 | bidirectional | FT_fl I/O with TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS_NSS, SAI2_SCK_A. |
| 35 | PB14 | bidirectional | FT_fl I/O with TIM1_CH2N, I2C2_SDA, SPI2_MISO, USART3_RTS_DE, SDMMC2_D0, SAI2_MCLK_A. |
| 36 | PB15 | bidirectional | FT I/O with RTC_REFIN, TIM1_CH3N, SPI2_MOSI, SDMMC2_D1, SAI2_SD_A. |
| 37 | PC6 | bidirectional | FT I/O with TIM3_CH1, TIM8_CH1, SDMMC2_D6, SDMMC1_D6, SAI2_MCLK_A, LCD_G7. |
| 38 | PC7 | bidirectional | FT I/O with TIM3_CH2, TIM8_CH2, SDMMC2_D7, SDMMC1_D7, SAI2_MCLK_B, LCD_B6. |
| 39 | PC8 | bidirectional | FT I/O with TIM3_CH3, TIM8_CH3, SDMMC1_D0, TSC_G4_IO3. |
| 40 | PC9 | bidirectional | FT_fl I/O with TIM3_CH4, TIM8_CH4, I2C3_SDA, OTG_FS_NOE, SDMMC1_D1, SAI2_EXTCLK. |
| 41 | PA8 | bidirectional | FT_f I/O with MCO, TIM1_CH1, USART1_CK, OTG_FS_SOF, SAI1_SCK_A, LPTIM2_OUT. |
| 42 | PA9 | bidirectional | FT_flu I/O with TIM1_CH2, SPI2_SCK, USART1_TX, SAI1_FS_A, plus OTG_FS_VBUS. |
| 43 | PA10 | bidirectional | FT_flu I/O with TIM1_CH3, USART1_RX, OTG_FS_ID, SAI1_SD_A. |
| 44 | PA11 | bidirectional | FT_u I/O with TIM1_CH4, SPI1_MISO, USART1_CTS_NSS, CAN1_RX, OTG_FS_DM. |
| 45 | PA12 | bidirectional | FT_u I/O with TIM1_ETR, SPI1_MOSI, USART1_RTS_DE, CAN1_TX, OTG_FS_DP. |
| 46 | PA13 | bidirectional | FT I/O that is JTMS/SWDIO after reset with internal pull-up active; also IR_OUT, OTG_FS_NOE, SAI1_SD_B. |
| 47 | VSS | power_in | Digital ground. |
| 48 | VDDUSB | power_in | Independent USB transceiver supply, 3.0 V to 3.6 V when USB is used. |
| 49 | PA14 | bidirectional | FT I/O that is JTCK/SWCLK after reset with internal pull-down active; also LPTIM1_OUT, I2C1_SMBA, OTG_FS_SOF. |
| 50 | PA15 (JTDI) | bidirectional | FT I/O that is JTDI after reset with internal pull-up active; also TIM2_CH1, SPI1_NSS, USART2_RX, LCD_HSYNC. |
| 51 | PC10 | bidirectional | FT I/O with TRACED1, SPI3_SCK, USART3_TX, UART4_TX, SDMMC1_D2, SAI2_SCK_B. |
| 52 | PC11 | bidirectional | FT I/O with SPI3_MISO, USART3_RX, UART4_RX, SDMMC1_D3, SAI2_MCLK_B. |
| 53 | PC12 | bidirectional | FT I/O with TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, SDMMC1_CK, SAI2_SD_B. |
| 54 | PD2 | bidirectional | FT I/O with TRACED2, TIM3_ETR, USART3_RTS_DE, UART5_RX, SDMMC1_CMD (not connected on the external SMPS variant). |
| 55 | PB3 | bidirectional | FT_la I/O that is JTDO/TRACESWO after reset; also TIM2_CH2, SPI1_SCK, SPI3_SCK, plus COMP2_INM. |
| 56 | PB4 (NJTRST) | bidirectional | FT_fa I/O that is NJTRST after reset with internal pull-up active; also TIM3_CH1, I2C3_SDA, SPI1_MISO, plus COMP2_INP. |
| 57 | PB5 | bidirectional | FT_la I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, USART1_CK, COMP2_OUT. |
| 58 | PB6 | bidirectional | FT_fa I/O with LPTIM1_ETR, TIM4_CH1, I2C1_SCL, USART1_TX, plus COMP2_INP. |
| 59 | PB7 | bidirectional | FT_fla I/O with LPTIM1_IN2, TIM4_CH2, I2C1_SDA, USART1_RX, plus COMP2_INM and PVD_IN. |
| 60 | PH3-BOOT0 | bidirectional | FT I/O (PH3) that also serves as the BOOT0 boot-mode selection pin. |
| 61 | PB8 | bidirectional | FT_fl I/O with TIM4_CH3, I2C1_SCL, CAN1_RX, SDMMC1_D4, SAI1_MCLK_A (not connected on the external SMPS variant). |
| 62 | PB9 | bidirectional | FT_fl I/O with IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, CAN1_TX, SAI1_FS_A. |
| 63 | VSS | power_in | Digital ground. |
| 64 | VDD | power_in | Digital supply, 1.71 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standard operating voltage | VDD | 1.71 | 3.6 | V | 139 | ||
| Internal AHB clock frequency | fHCLK | 0 | 120 | MHz | 139 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 120 | MHz | 139 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 120 | MHz | 139 | ||
| PG[15:2] I/Os supply voltage | VDDIO2 | 1.08 | 3.6 | V | At least one I/O in PG[15:2] used | 139 | |
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 139 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 139 | ||
| USB supply voltage | VDDUSB | 3 | 3.6 | V | USB used | 139 | |
| Ambient temperature suffix 6, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation | 140 | |
| Ambient temperature suffix 6, low-power dissipation | TA | -40 | 105 | °C | Low-power dissipation | 140 | |
| Junction temperature suffix 6 | TJ | -40 | 105 | °C | Suffix 6 version | 140 | |
| External main supply voltage | VDDX - VSS | -0.3 | 4 | V | Including VDD, VDDA, VDDIO2, VDDUSB, VBAT, VREF+ | 137 | |
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | VSS-0.3 min | 137 | |
| Total current into all VDD lines | ΣIVDD | 200 | mA | source | 138 | ||
| Total current out of all VSS lines | ΣIVSS | 200 | mA | sink | 138 | ||
| Max current into each VDD pin | IVDD(PIN) | 100 | mA | source | 138 | ||
| Max current out of each VSS pin | IVSS(PIN) | 100 | mA | sink | 138 | ||
| Output current sunk by any I/O except FT_f | IIO(PIN) | 20 | mA | 138 | |||
| Output current sourced by any I/O | IIO(PIN) | 20 | mA | 138 | |||
| Total injected current | Σ/IINJ(PIN)/ | 25 | mA | 138 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 139 | ||
| Maximum junction temperature | TJ | 150 | °C | 139 | |||
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TJ < +130 °C | 143 |
| Brown-out reset threshold 0 rising | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 141 |
| Brown-out reset threshold 0 falling | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 141 |
| Reset temporization after BOR0 detected | tRSTTEMPO | 250 | 400 | μs | VDD rising | 141 | |
| Run mode current Range 1 Boost | IDD(Run) | 17.5 | 21 | mA | 120 MHz, 25°C, code from Flash single bank, ART enable | 146 | |
| Stop 2 current RTC disabled | IDD(Stop 2) | 2.95 | 8 | µA | 3 V, 25°C, RTC disabled | 165 |
CAD (KiCad official)
- Symbol:
STM32L4Q5RGT6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32l4q5rgt6-etched.step/stm32l4q5rgt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l4q5rgt6.step/stm32l4q5rgt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (312 pp, sha256
6a484839c87123c0, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).