component
STM32L496VGT6TR
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
d138f59
STM32L496VGT6TR
STMicroelectronics · ST Microelectronics · LQFP-100(14x14)
STM32L496VGT6TR from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACECK, TIM3_ETR, TSC_G7_IO1, FMC_A23 and SAI1_MCLK_A. |
| 2 | PE3 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACED0, TIM3_CH1, TSC_G7_IO2, FMC_A19 and SAI1_SD_B. |
| 3 | PE4 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TRACED1, TIM3_CH2, DFSDM1_DATIN3, DCMI_D4, FMC_A20 and SAI1_FS_A. |
| 4 | PE5 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TRACED2, TIM3_CH3, DFSDM1_CKIN3, DCMI_D6, FMC_A21 and SAI1_SCK_A. |
| 5 | PE6 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TRACED3, TIM3_CH4, DCMI_D7, FMC_A22 and SAI1_SD_A; also RTC_TAMP3/WKUP3. |
| 6 | VBAT | power_in | Backup domain supply for RTC and backup registers, 1.55 V to 3.6 V. |
| 7 | PC13 | bidirectional | FT I/O supplied through the power switch, which sinks only 3 mA, so output speed is limited to 2 MHz with 30 pF and it must not drive current sources; also RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2. |
| 8 | PC14-OSC32_IN | bidirectional | FT I/O with the same power-switch limits as PC13 (max 3 mA sink, 2 MHz at 30 pF); also the LSE oscillator input OSC32_IN. |
| 9 | PC15-OSC32_OUT | bidirectional | FT I/O with the same power-switch limits as PC13 (max 3 mA sink, 2 MHz at 30 pF); also the LSE oscillator output OSC32_OUT. |
| 10 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 11 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | FT I/O; also the high-speed external oscillator input OSC_IN. |
| 13 | PH1-OSC_OUT | bidirectional | FT I/O; also the high-speed external oscillator output OSC_OUT. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | FT_fla I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include LPTIM1_IN1, I2C4_SCL, I2C3_SCL, LPUART1_RX and LCD_SEG18; ADC123_INP1 analog input. |
| 16 | PC1 | bidirectional | FT_fla I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include TRACED0, LPTIM1_OUT, I2C4_SDA, SPI2_MOSI, LPUART1_TX and SAI1_SD_A; ADC123_INP2 and ADC123_INN1 analog inputs. |
| 17 | PC2 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT and LCD_SEG20; ADC123_INP3 and ADC123_INN2 analog inputs. |
| 18 | PC3 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include LPTIM1_ETR, SPI2_MOSI, LCD_VLCD, SAI1_SD_A and LPTIM2_ETR; ADC123_INP4 and ADC123_INN3 analog inputs. |
| 19 | VSSA | power_in | Analog ground for the ADC, DAC, OPAMP, COMP and VREFBUF; the variation between all ground pins must not exceed 50 mV. |
| 20 | VREF- | power_in | Negative ADC reference voltage; may be internally connected to VSSA depending on the package. |
| 21 | VREF+ | power_in | Positive ADC reference voltage; it must be at least 2 V when VDDA is at or above 2 V, and VREF+ must not exceed VDDA by more than 0.4 V. |
| 22 | VDDA | power_in | Analog supply: 1.62 V to 3.6 V when the ADC or COMP is used, 1.8 V minimum when DAC or OPAMP is used, and 2.4 V minimum when VREFBUF is used. |
| 23 | PA0 | bidirectional | FT_a I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH1, TIM8_ETR, USART2_CTS and UART4_TX; also OPAMP1_VINPP, ADC12_INP5 and RTC_TAMP2/WKUP1. |
| 24 | PA1 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include TIM2_CH2, I2C1_SMBA, SPI1_SCK, USART2_RTS_DE and UART4_RX; also OPAMP1_VINPM and ADC12_INP6. |
| 25 | PA2 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include TIM2_CH3, USART2_TX, LPUART1_TX, QUADSPI_BK1_NCS and SAI2_EXTCLK; also ADC12_INP7 and WKUP4/LSCO. |
| 26 | PA3 | bidirectional | TT_la I/O, 3.6 V tolerant (analog switch supplied by VDDA); alternate functions include TIM2_CH4, USART2_RX, LPUART1_RX, QUADSPI_CLK and SAI1_MCLK_A; also OPAMP1_VOUT and ADC12_INP8. |
| 27 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 28 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 29 | PA4 | bidirectional | TT_a I/O, 3.6 V tolerant (analog switch supplied by VDDA); alternate functions include SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC and LPTIM2_OUT; also ADC12_INP9 and DAC1_OUT1. |
| 30 | PA5 | bidirectional | TT_a I/O, 3.6 V tolerant (analog switch supplied by VDDA); alternate functions include TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK and LPTIM2_ETR; also ADC12_INP10 and DAC1_OUT2. |
| 31 | PA6 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include TIM1_BKIN, TIM3_CH1, DCMI_PIXCLK, SPI1_MISO, USART3_CTS and QUADSPI_BK1_IO3; also OPAMP2_VINPP and ADC12_INP11. |
| 32 | PA7 | bidirectional | FT_fla I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include TIM1_CH1N, TIM3_CH2, I2C3_SCL, SPI1_MOSI and QUADSPI_BK1_IO2; also OPAMP2_VINPM and ADC12_INP12. |
| 33 | PC4 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include USART3_TX and QUADSPI_BK2_IO3; also COMP1_INPM and ADC12_INP13. |
| 34 | PC5 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include USART3_RX and LCD_SEG23; also COMP1_INPP, ADC12_INP14 and WKUP5. |
| 35 | PB0 | bidirectional | TT_la I/O, 3.6 V tolerant (analog switch supplied by VDDA); alternate functions include TIM1_CH2N, TIM3_CH3, SPI1_NSS, USART3_CK, QUADSPI_BK1_IO1 and COMP1_OUT; also OPAMP2_VOUT and ADC12_INP15. |
| 36 | PB1 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include TIM1_CH3N, TIM3_CH4, DFSDM1_DATIN0, USART3_RTS_DE, LPUART1_RTS_DE and QUADSPI_BK1_IO0; also COMP1_INPM and ADC12_INP16. |
| 37 | PB2 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0 and LCD_VLCD; also COMP1_INP. |
| 38 | PE7 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_ETR, DFSDM1_DATIN2, FMC_D4 and SAI1_SD_B. |
| 39 | PE8 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, FMC_D5 and SAI1_SCK_B. |
| 40 | PE9 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH1, DFSDM1_CKOUT, FMC_D6 and SAI1_FS_B. |
| 41 | PE10 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, QUADSPI_CLK, FMC_D7 and SAI1_MCLK_B. |
| 42 | PE11 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, QUADSPI_BK1_NCS and FMC_D8. |
| 43 | PE12 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3, QUADSPI_BK1_IO0 and FMC_D9. |
| 44 | PE13 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4, QUADSPI_BK1_IO1 and FMC_D10. |
| 45 | PE14 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, QUADSPI_BK1_IO2 and FMC_D11. |
| 46 | PE15 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_BKIN, TIM1_BKIN_COMP1, SPI1_MOSI, QUADSPI_BK1_IO3 and FMC_D12. |
| 47 | PB10 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, LPUART1_RX and QUADSPI_CLK. |
| 48 | PB11 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX and QUADSPI_BK1_NCS. |
| 49 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 50 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 51 | PB12 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS, USART3_CK, CAN2_RX and TIM15_BKIN. |
| 52 | PB13 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS, CAN2_TX and TIM15_CH1N. |
| 53 | PB14 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM1_CH2N, I2C2_SDA, SPI2_MISO, USART3_RTS_DE and TIM15_CH1. |
| 54 | PB15 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, DFSDM1_CKIN2 and TIM15_CH2. |
| 55 | PD8 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include USART3_TX, DCMI_HSYNC, LCD_SEG28 and FMC_D13. |
| 56 | PD9 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include USART3_RX, DCMI_PIXCLK, LCD_SEG29, FMC_D14 and SAI2_MCLK_A. |
| 57 | PD10 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include USART3_CK, TSC_G6_IO1, LCD_SEG30, FMC_D15 and SAI2_SCK_A. |
| 58 | PD11 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include I2C4_SMBA, USART3_CTS, TSC_G6_IO2, FMC_A16, SAI2_SD_A and LPTIM2_ETR. |
| 59 | PD12 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM4_CH1, I2C4_SCL, USART3_RTS_DE, TSC_G6_IO3, FMC_A17 and LPTIM2_IN1. |
| 60 | PD13 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM4_CH2, I2C4_SDA, TSC_G6_IO4, FMC_A18 and LPTIM2_OUT. |
| 61 | PD14 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH3, LCD_SEG34 and FMC_D0. |
| 62 | PD15 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH4, LCD_SEG35 and FMC_D1. |
| 63 | PC6 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, TSC_G4_IO1, DCMI_D0 and SDMMC1_D6. |
| 64 | PC7 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, TSC_G4_IO2, DCMI_D1 and SDMMC1_D7. |
| 65 | PC8 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM3_CH3, TIM8_CH3, TSC_G4_IO3, DCMI_D2 and SDMMC1_D0. |
| 66 | PC9 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM8_BKIN2, TIM3_CH4, TIM8_CH4, DCMI_D3, I2C3_SDA, OTG_FS_NOE and SDMMC1_D1. |
| 67 | PA8 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include MCO, TIM1_CH1, USART1_CK, OTG_FS_SOF, LCD_COM0 and SAI1_SCK_A. |
| 68 | PA9 | bidirectional | FT_lu 5 V-tolerant I/O with LCD function (VLCD) and USB function (VDDUSB); alternate functions include TIM1_CH2, SPI2_SCK, DCMI_D0, USART1_TX, LCD_COM1 and SAI1_FS_A; also OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | FT_lu 5 V-tolerant I/O with LCD function (VLCD) and USB function (VDDUSB); alternate functions include TIM1_CH3, DCMI_D1, USART1_RX, OTG_FS_ID, LCD_COM2 and SAI1_SD_A. |
| 70 | PA11 | bidirectional | FT_u 5 V-tolerant I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS, CAN1_RX and OTG_FS_DM. |
| 71 | PA12 | bidirectional | FT_u 5 V-tolerant I/O with USB function supplied by VDDUSB; alternate functions include TIM1_ETR, SPI1_MOSI, USART1_RTS_DE, CAN1_TX and OTG_FS_DP. |
| 72 | PA13 | bidirectional | FT 5 V-tolerant I/O; after reset it is the JTMS/SWDIO debug function with an internal pull-up enabled; also IR_OUT, OTG_FS_NOE and SAI1_SD_B. |
| 73 | VDDUSB | power_in | USB transceiver supply, 3.0 V to 3.6 V when USB is used. |
| 74 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 75 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 76 | PA14 | bidirectional | FT 5 V-tolerant I/O; after reset it is the JTCK/SWCLK debug function with an internal pull-down enabled; also LPTIM1_OUT, I2C1_SMBA, I2C4_SMBA and SAI1_FS_B. |
| 77 | PA15 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; after reset it is the JTDI debug function with an internal pull-up enabled; also TIM2_CH1, USART2_RX, SPI1_NSS and SPI3_NSS. |
| 78 | PC10 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACED1, SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, DCMI_D8 and SDMMC1_D2. |
| 79 | PC11 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include QUADSPI_BK2_NCS, SPI3_MISO, USART3_RX, UART4_RX, DCMI_D4 and SDMMC1_D3. |
| 80 | PC12 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, DCMI_D9 and SDMMC1_CK. |
| 81 | PD0 | bidirectional | FT 5 V-tolerant I/O; alternate functions include SPI2_NSS, DFSDM1_DATIN7, CAN1_RX and FMC_D2. |
| 82 | PD1 | bidirectional | FT 5 V-tolerant I/O; alternate functions include SPI2_SCK, DFSDM1_CKIN7, CAN1_TX and FMC_D3. |
| 83 | PD2 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACED2, TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, DCMI_D11 and SDMMC1_CMD. |
| 84 | PD3 | bidirectional | FT 5 V-tolerant I/O; alternate functions include SPI2_SCK, DCMI_D5, SPI2_MISO, DFSDM1_DATIN0, USART2_CTS, QUADSPI_BK2_NCS and FMC_CLK. |
| 85 | PD4 | bidirectional | FT 5 V-tolerant I/O; alternate functions include SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, QUADSPI_BK2_IO0 and FMC_NOE. |
| 86 | PD5 | bidirectional | FT 5 V-tolerant I/O; alternate functions include USART2_TX, QUADSPI_BK2_IO1 and FMC_NWE. |
| 87 | PD6 | bidirectional | FT 5 V-tolerant I/O; alternate functions include DCMI_D10, QUADSPI_BK2_IO2, DFSDM1_DATIN1, USART2_RX, FMC_NWAIT and SAI1_SD_A. |
| 88 | PD7 | bidirectional | FT 5 V-tolerant I/O; alternate functions include DFSDM1_CKIN1, USART2_CK, QUADSPI_BK2_IO3 and FMC_NE1. |
| 89 | PB3 | bidirectional | FT_la 5 V-tolerant I/O (analog switch supplied by VDDA); after reset it is the JTDO/TRACESWO debug function; also TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE and COMP2_INM. |
| 90 | PB4 | bidirectional | FT_fla 5 V-tolerant I/O (Fm+ capable, analog switch supplied by VDDA); after reset it is the NJTRST debug function with an internal pull-up enabled; also TIM3_CH1, SPI1_MISO, SPI3_MISO, USART1_CTS, DCMI_D12 and COMP2_INP. |
| 91 | PB5 | bidirectional | FT_la 5 V-tolerant I/O (analog switch supplied by VDDA); alternate functions include LPTIM1_IN1, TIM3_CH2, CAN2_RX, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, DCMI_D10 and COMP2_OUT. |
| 92 | PB6 | bidirectional | FT_fa 5 V-tolerant I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include LPTIM1_ETR, TIM4_CH1, I2C1_SCL, I2C4_SCL, DFSDM1_DATIN5, USART1_TX, CAN2_TX and DCMI_D5; also COMP2_INP. |
| 93 | PB7 | bidirectional | FT_fla 5 V-tolerant I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include LPTIM1_IN2, TIM4_CH2, I2C1_SDA, I2C4_SDA, USART1_RX, DCMI_VSYNC and FMC_NL; also COMP2_INM and PVD_IN. |
| 94 | PH3-BOOT0 | bidirectional | FT I/O that also serves as the BOOT0 boot-mode input, which accepts up to 9 V on the BOOT0 pin. |
| 95 | PB8 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM4_CH3, I2C1_SCL, DFSDM1_DATIN6, CAN1_RX, DCMI_D6, LCD_SEG16, SDMMC1_D4 and TIM16_CH1. |
| 96 | PB9 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, CAN1_TX, DCMI_D7, LCD_COM3 and SDMMC1_D5. |
| 97 | PE0 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM4_ETR, DCMI_D2, LCD_SEG36, FMC_NBL0 and TIM16_CH1. |
| 98 | PE1 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include DCMI_D3, LCD_SEG37, FMC_NBL1 and TIM17_CH1. |
| 99 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 100 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD, VDDA, VDDIO2, VDDUSB, VLCD, VBAT, VREF+) to VSS | VDDX-VSS | -0.3 | 4 | V | 124 | ||
| Input voltage on FT_xxx pins | VIN | -0.3 | V | Max printed as min(VDD, VDDA, VDDIO2, VDDUSB, VLCD)+4.0 (formula, see notes 3-4) | 124 | ||
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | 124 | ||
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 124 | ||
| Input voltage on any other pins | VIN | -0.3 | 4 | V | 124 | ||
| Variations between different VDDX power pins of the same domain | /ΔVDDx/ | 50 | mV | 125 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ - VDDA | 0.4 | V | 125 | |||
| Total current into sum of all VDD power lines (source) | ∑IVDD | 150 | mA | 125 | |||
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | 150 | mA | 125 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 125 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 125 | |||
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | 20 | mA | 125 | |||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | 125 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 125 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | 125 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | 125 | |||
| Injected current on FT_xxx, TT_xx, RST and B pins | IINJ(PIN) | -5 | 0 | mA | Except PA4, PA5 | 125 | |
| Injected current on PA4, PA5 | IINJ(PIN) | -5 | 0 | mA | PA4, PA5 | 125 | |
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | 125 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 126 | ||
| Maximum junction temperature | TJ | 150 | °C | 126 | |||
| Internal AHB clock frequency | fHCLK | 0 | 80 | MHz | 126 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 80 | MHz | 126 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 80 | MHz | 126 | ||
| Standard operating voltage | VDD | 1.71 | 3.6 | V | 126 | ||
| PG[15:2] I/Os supply voltage | VDDIO2 | 1.08 | 3.6 | V | At least one I/O in PG[15:2] used | 126 | |
| PG[15:2] I/Os supply voltage | VDDIO2 | 0 | 3.6 | V | PG[15:2] not used | 126 | |
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 126 | |
| Analog supply voltage | VDDA | 1.8 | V | DAC or OPAMP used | 126 | ||
| Analog supply voltage | VDDA | 2.4 | V | VREFBUF used | 126 | ||
| Analog supply voltage | VDDA | 0 | V | ADC, DAC, OPAMP, COMP, VREFBUF not used | 126 | ||
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 126 | ||
| USB supply voltage | VDDUSB | 3 | 3.6 | V | USB used | 126 | |
| USB supply voltage | VDDUSB | 0 | 3.6 | V | USB not used | 126 | |
| I/O input voltage, TT_xx I/O | VIN | -0.3 | V | Max printed as VDDIOx+0.3 (formula) | 126 | ||
| I/O input voltage, BOOT0 | VIN | 0 | 9 | V | 126 | ||
| I/O input voltage, all I/O except BOOT0 and TT_xx | VIN | -0.3 | V | Max printed as min(min(VDD, VDDA, VDDIO2, VDDUSB, VLCD)+3.6 V, 5.5 V) (formula) | 126 | ||
| Power dissipation, LQFP100 | PD | 476 | mW | TA = 85 °C for suffix 6 | 127 | ||
| Ambient temperature for the suffix 6 version, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation | 127 | |
| Ambient temperature for the suffix 6 version, low-power dissipation | TA | -40 | 105 | °C | Low-power dissipation | 127 | |
| Junction temperature range, suffix 6 version | TJ | -40 | 105 | °C | Suffix 6 version | 127 | |
| VDD rise time rate | tVDD | 0 | µs/V | Max printed as ∞ | 127 | ||
| Reset temporization after BOR0 is detected | tRSTTEMPO | 250 | 400 | µs | VDD rising | 128 | |
| Brown-out reset threshold 0 | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 128 |
| Brown-out reset threshold 0 | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 128 |
| Brown-out reset threshold 1 | VBOR1 | 2.06 | 2.1 | 2.14 | V | Rising edge | 128 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2 | 2.04 | V | Falling edge | 128 |
| Brown-out reset threshold 2 | VBOR2 | 2.26 | 2.31 | 2.35 | V | Rising edge | 128 |
| Brown-out reset threshold 2 | VBOR2 | 2.16 | 2.2 | 2.24 | V | Falling edge | 128 |
| Brown-out reset threshold 3 | VBOR3 | 2.56 | 2.61 | 2.66 | V | Rising edge | 128 |
| Brown-out reset threshold 3 | VBOR3 | 2.47 | 2.52 | 2.57 | V | Falling edge | 128 |
| Brown-out reset threshold 4 | VBOR4 | 2.85 | 2.9 | 2.95 | V | Rising edge | 128 |
| Brown-out reset threshold 4 | VBOR4 | 2.76 | 2.81 | 2.86 | V | Falling edge | 128 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 130 |
| ADC sampling time when reading the internal reference voltage | tstart_vrefint | 8 | 12 | µs | Start time of reference voltage buffer when ADC is enabled | 130 | |
| Internal reference voltage spread over the temperature range | ∆VREFINT | 5 | 7.5 | mV | VDD = 3 V | 130 | |
| Average temperature coefficient | TCoeff | 30 | 50 | ppm/°C | -40 °C < TA < +130 °C | 130 | |
| Supply current in Run mode | IDD_ALL(Run) | 9.44 | 10.3 | mA | Range 1, fHCLK = 80 MHz, all peripherals disabled, ART enable, TA = 25 °C | 132 | |
| Supply current in Stop 2 mode, RTC disabled, LCD disabled | IDD_ALL(Stop 2) | 2.69 | 5.4 | µA | VDD = 3 V, TA = 25 °C | 145 | |
| Supply current in Standby mode (backup registers retained), RTC disabled, no independent watchdog | IDD_ALL(Standby) | 133 | 318 | nA | VDD = 3 V, TA = 25 °C | 150 |
CAD (KiCad official)
- Symbol:
STM32L496VGT6TR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32l496vgt6tr-etched.step/stm32l496vgt6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l496vgt6tr.step/stm32l496vgt6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (280 pp, sha256
07777c1c9ca126d7, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L496VGT6TR
**STMicroelectronics** · ST Microelectronics · LQFP-100(14x14)
STM32L496VGT6TR from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACECK, TIM3_ETR, TSC_G7_IO1, FMC_A23 and SAI1_MCLK_A. |
| 2 | PE3 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACED0, TIM3_CH1, TSC_G7_IO2, FMC_A19 and SAI1_SD_B. |
| 3 | PE4 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TRACED1, TIM3_CH2, DFSDM1_DATIN3, DCMI_D4, FMC_A20 and SAI1_FS_A. |
| 4 | PE5 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TRACED2, TIM3_CH3, DFSDM1_CKIN3, DCMI_D6, FMC_A21 and SAI1_SCK_A. |
| 5 | PE6 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TRACED3, TIM3_CH4, DCMI_D7, FMC_A22 and SAI1_SD_A; also RTC_TAMP3/WKUP3. |
| 6 | VBAT | power_in | Backup domain supply for RTC and backup registers, 1.55 V to 3.6 V. |
| 7 | PC13 | bidirectional | FT I/O supplied through the power switch, which sinks only 3 mA, so output speed is limited to 2 MHz with 30 pF and it must not drive current sources; also RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2. |
| 8 | PC14-OSC32_IN | bidirectional | FT I/O with the same power-switch limits as PC13 (max 3 mA sink, 2 MHz at 30 pF); also the LSE oscillator input OSC32_IN. |
| 9 | PC15-OSC32_OUT | bidirectional | FT I/O with the same power-switch limits as PC13 (max 3 mA sink, 2 MHz at 30 pF); also the LSE oscillator output OSC32_OUT. |
| 10 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 11 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | FT I/O; also the high-speed external oscillator input OSC_IN. |
| 13 | PH1-OSC_OUT | bidirectional | FT I/O; also the high-speed external oscillator output OSC_OUT. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | FT_fla I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include LPTIM1_IN1, I2C4_SCL, I2C3_SCL, LPUART1_RX and LCD_SEG18; ADC123_INP1 analog input. |
| 16 | PC1 | bidirectional | FT_fla I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include TRACED0, LPTIM1_OUT, I2C4_SDA, SPI2_MOSI, LPUART1_TX and SAI1_SD_A; ADC123_INP2 and ADC123_INN1 analog inputs. |
| 17 | PC2 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT and LCD_SEG20; ADC123_INP3 and ADC123_INN2 analog inputs. |
| 18 | PC3 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include LPTIM1_ETR, SPI2_MOSI, LCD_VLCD, SAI1_SD_A and LPTIM2_ETR; ADC123_INP4 and ADC123_INN3 analog inputs. |
| 19 | VSSA | power_in | Analog ground for the ADC, DAC, OPAMP, COMP and VREFBUF; the variation between all ground pins must not exceed 50 mV. |
| 20 | VREF- | power_in | Negative ADC reference voltage; may be internally connected to VSSA depending on the package. |
| 21 | VREF+ | power_in | Positive ADC reference voltage; it must be at least 2 V when VDDA is at or above 2 V, and VREF+ must not exceed VDDA by more than 0.4 V. |
| 22 | VDDA | power_in | Analog supply: 1.62 V to 3.6 V when the ADC or COMP is used, 1.8 V minimum when DAC or OPAMP is used, and 2.4 V minimum when VREFBUF is used. |
| 23 | PA0 | bidirectional | FT_a I/O with analog switch supplied by VDDA; alternate functions include TIM2_CH1, TIM8_ETR, USART2_CTS and UART4_TX; also OPAMP1_VINPP, ADC12_INP5 and RTC_TAMP2/WKUP1. |
| 24 | PA1 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include TIM2_CH2, I2C1_SMBA, SPI1_SCK, USART2_RTS_DE and UART4_RX; also OPAMP1_VINPM and ADC12_INP6. |
| 25 | PA2 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include TIM2_CH3, USART2_TX, LPUART1_TX, QUADSPI_BK1_NCS and SAI2_EXTCLK; also ADC12_INP7 and WKUP4/LSCO. |
| 26 | PA3 | bidirectional | TT_la I/O, 3.6 V tolerant (analog switch supplied by VDDA); alternate functions include TIM2_CH4, USART2_RX, LPUART1_RX, QUADSPI_CLK and SAI1_MCLK_A; also OPAMP1_VOUT and ADC12_INP8. |
| 27 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 28 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 29 | PA4 | bidirectional | TT_a I/O, 3.6 V tolerant (analog switch supplied by VDDA); alternate functions include SPI1_NSS, SPI3_NSS, USART2_CK, DCMI_HSYNC and LPTIM2_OUT; also ADC12_INP9 and DAC1_OUT1. |
| 30 | PA5 | bidirectional | TT_a I/O, 3.6 V tolerant (analog switch supplied by VDDA); alternate functions include TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK and LPTIM2_ETR; also ADC12_INP10 and DAC1_OUT2. |
| 31 | PA6 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include TIM1_BKIN, TIM3_CH1, DCMI_PIXCLK, SPI1_MISO, USART3_CTS and QUADSPI_BK1_IO3; also OPAMP2_VINPP and ADC12_INP11. |
| 32 | PA7 | bidirectional | FT_fla I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include TIM1_CH1N, TIM3_CH2, I2C3_SCL, SPI1_MOSI and QUADSPI_BK1_IO2; also OPAMP2_VINPM and ADC12_INP12. |
| 33 | PC4 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include USART3_TX and QUADSPI_BK2_IO3; also COMP1_INPM and ADC12_INP13. |
| 34 | PC5 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include USART3_RX and LCD_SEG23; also COMP1_INPP, ADC12_INP14 and WKUP5. |
| 35 | PB0 | bidirectional | TT_la I/O, 3.6 V tolerant (analog switch supplied by VDDA); alternate functions include TIM1_CH2N, TIM3_CH3, SPI1_NSS, USART3_CK, QUADSPI_BK1_IO1 and COMP1_OUT; also OPAMP2_VOUT and ADC12_INP15. |
| 36 | PB1 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include TIM1_CH3N, TIM3_CH4, DFSDM1_DATIN0, USART3_RTS_DE, LPUART1_RTS_DE and QUADSPI_BK1_IO0; also COMP1_INPM and ADC12_INP16. |
| 37 | PB2 | bidirectional | FT_la I/O (analog switch supplied by VDDA); alternate functions include RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0 and LCD_VLCD; also COMP1_INP. |
| 38 | PE7 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_ETR, DFSDM1_DATIN2, FMC_D4 and SAI1_SD_B. |
| 39 | PE8 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, FMC_D5 and SAI1_SCK_B. |
| 40 | PE9 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH1, DFSDM1_CKOUT, FMC_D6 and SAI1_FS_B. |
| 41 | PE10 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, QUADSPI_CLK, FMC_D7 and SAI1_MCLK_B. |
| 42 | PE11 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, QUADSPI_BK1_NCS and FMC_D8. |
| 43 | PE12 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3, QUADSPI_BK1_IO0 and FMC_D9. |
| 44 | PE13 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4, QUADSPI_BK1_IO1 and FMC_D10. |
| 45 | PE14 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, QUADSPI_BK1_IO2 and FMC_D11. |
| 46 | PE15 | bidirectional | FT 5 V-tolerant I/O; alternate functions include TIM1_BKIN, TIM1_BKIN_COMP1, SPI1_MOSI, QUADSPI_BK1_IO3 and FMC_D12. |
| 47 | PB10 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, LPUART1_RX and QUADSPI_CLK. |
| 48 | PB11 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX and QUADSPI_BK1_NCS. |
| 49 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 50 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 51 | PB12 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS, USART3_CK, CAN2_RX and TIM15_BKIN. |
| 52 | PB13 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS, CAN2_TX and TIM15_CH1N. |
| 53 | PB14 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM1_CH2N, I2C2_SDA, SPI2_MISO, USART3_RTS_DE and TIM15_CH1. |
| 54 | PB15 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, DFSDM1_CKIN2 and TIM15_CH2. |
| 55 | PD8 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include USART3_TX, DCMI_HSYNC, LCD_SEG28 and FMC_D13. |
| 56 | PD9 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include USART3_RX, DCMI_PIXCLK, LCD_SEG29, FMC_D14 and SAI2_MCLK_A. |
| 57 | PD10 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include USART3_CK, TSC_G6_IO1, LCD_SEG30, FMC_D15 and SAI2_SCK_A. |
| 58 | PD11 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include I2C4_SMBA, USART3_CTS, TSC_G6_IO2, FMC_A16, SAI2_SD_A and LPTIM2_ETR. |
| 59 | PD12 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM4_CH1, I2C4_SCL, USART3_RTS_DE, TSC_G6_IO3, FMC_A17 and LPTIM2_IN1. |
| 60 | PD13 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM4_CH2, I2C4_SDA, TSC_G6_IO4, FMC_A18 and LPTIM2_OUT. |
| 61 | PD14 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH3, LCD_SEG34 and FMC_D0. |
| 62 | PD15 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM4_CH4, LCD_SEG35 and FMC_D1. |
| 63 | PC6 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, TSC_G4_IO1, DCMI_D0 and SDMMC1_D6. |
| 64 | PC7 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, TSC_G4_IO2, DCMI_D1 and SDMMC1_D7. |
| 65 | PC8 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM3_CH3, TIM8_CH3, TSC_G4_IO3, DCMI_D2 and SDMMC1_D0. |
| 66 | PC9 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM8_BKIN2, TIM3_CH4, TIM8_CH4, DCMI_D3, I2C3_SDA, OTG_FS_NOE and SDMMC1_D1. |
| 67 | PA8 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include MCO, TIM1_CH1, USART1_CK, OTG_FS_SOF, LCD_COM0 and SAI1_SCK_A. |
| 68 | PA9 | bidirectional | FT_lu 5 V-tolerant I/O with LCD function (VLCD) and USB function (VDDUSB); alternate functions include TIM1_CH2, SPI2_SCK, DCMI_D0, USART1_TX, LCD_COM1 and SAI1_FS_A; also OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | FT_lu 5 V-tolerant I/O with LCD function (VLCD) and USB function (VDDUSB); alternate functions include TIM1_CH3, DCMI_D1, USART1_RX, OTG_FS_ID, LCD_COM2 and SAI1_SD_A. |
| 70 | PA11 | bidirectional | FT_u 5 V-tolerant I/O with USB function supplied by VDDUSB; alternate functions include TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS, CAN1_RX and OTG_FS_DM. |
| 71 | PA12 | bidirectional | FT_u 5 V-tolerant I/O with USB function supplied by VDDUSB; alternate functions include TIM1_ETR, SPI1_MOSI, USART1_RTS_DE, CAN1_TX and OTG_FS_DP. |
| 72 | PA13 | bidirectional | FT 5 V-tolerant I/O; after reset it is the JTMS/SWDIO debug function with an internal pull-up enabled; also IR_OUT, OTG_FS_NOE and SAI1_SD_B. |
| 73 | VDDUSB | power_in | USB transceiver supply, 3.0 V to 3.6 V when USB is used. |
| 74 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 75 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 76 | PA14 | bidirectional | FT 5 V-tolerant I/O; after reset it is the JTCK/SWCLK debug function with an internal pull-down enabled; also LPTIM1_OUT, I2C1_SMBA, I2C4_SMBA and SAI1_FS_B. |
| 77 | PA15 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; after reset it is the JTDI debug function with an internal pull-up enabled; also TIM2_CH1, USART2_RX, SPI1_NSS and SPI3_NSS. |
| 78 | PC10 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACED1, SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, DCMI_D8 and SDMMC1_D2. |
| 79 | PC11 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include QUADSPI_BK2_NCS, SPI3_MISO, USART3_RX, UART4_RX, DCMI_D4 and SDMMC1_D3. |
| 80 | PC12 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, DCMI_D9 and SDMMC1_CK. |
| 81 | PD0 | bidirectional | FT 5 V-tolerant I/O; alternate functions include SPI2_NSS, DFSDM1_DATIN7, CAN1_RX and FMC_D2. |
| 82 | PD1 | bidirectional | FT 5 V-tolerant I/O; alternate functions include SPI2_SCK, DFSDM1_CKIN7, CAN1_TX and FMC_D3. |
| 83 | PD2 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TRACED2, TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, DCMI_D11 and SDMMC1_CMD. |
| 84 | PD3 | bidirectional | FT 5 V-tolerant I/O; alternate functions include SPI2_SCK, DCMI_D5, SPI2_MISO, DFSDM1_DATIN0, USART2_CTS, QUADSPI_BK2_NCS and FMC_CLK. |
| 85 | PD4 | bidirectional | FT 5 V-tolerant I/O; alternate functions include SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, QUADSPI_BK2_IO0 and FMC_NOE. |
| 86 | PD5 | bidirectional | FT 5 V-tolerant I/O; alternate functions include USART2_TX, QUADSPI_BK2_IO1 and FMC_NWE. |
| 87 | PD6 | bidirectional | FT 5 V-tolerant I/O; alternate functions include DCMI_D10, QUADSPI_BK2_IO2, DFSDM1_DATIN1, USART2_RX, FMC_NWAIT and SAI1_SD_A. |
| 88 | PD7 | bidirectional | FT 5 V-tolerant I/O; alternate functions include DFSDM1_CKIN1, USART2_CK, QUADSPI_BK2_IO3 and FMC_NE1. |
| 89 | PB3 | bidirectional | FT_la 5 V-tolerant I/O (analog switch supplied by VDDA); after reset it is the JTDO/TRACESWO debug function; also TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE and COMP2_INM. |
| 90 | PB4 | bidirectional | FT_fla 5 V-tolerant I/O (Fm+ capable, analog switch supplied by VDDA); after reset it is the NJTRST debug function with an internal pull-up enabled; also TIM3_CH1, SPI1_MISO, SPI3_MISO, USART1_CTS, DCMI_D12 and COMP2_INP. |
| 91 | PB5 | bidirectional | FT_la 5 V-tolerant I/O (analog switch supplied by VDDA); alternate functions include LPTIM1_IN1, TIM3_CH2, CAN2_RX, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, DCMI_D10 and COMP2_OUT. |
| 92 | PB6 | bidirectional | FT_fa 5 V-tolerant I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include LPTIM1_ETR, TIM4_CH1, I2C1_SCL, I2C4_SCL, DFSDM1_DATIN5, USART1_TX, CAN2_TX and DCMI_D5; also COMP2_INP. |
| 93 | PB7 | bidirectional | FT_fla 5 V-tolerant I/O (Fm+ capable, analog switch supplied by VDDA); alternate functions include LPTIM1_IN2, TIM4_CH2, I2C1_SDA, I2C4_SDA, USART1_RX, DCMI_VSYNC and FMC_NL; also COMP2_INM and PVD_IN. |
| 94 | PH3-BOOT0 | bidirectional | FT I/O that also serves as the BOOT0 boot-mode input, which accepts up to 9 V on the BOOT0 pin. |
| 95 | PB8 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include TIM4_CH3, I2C1_SCL, DFSDM1_DATIN6, CAN1_RX, DCMI_D6, LCD_SEG16, SDMMC1_D4 and TIM16_CH1. |
| 96 | PB9 | bidirectional | FT_fl 5 V-tolerant I/O (Fm+ capable, LCD function supplied by VLCD); alternate functions include IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, CAN1_TX, DCMI_D7, LCD_COM3 and SDMMC1_D5. |
| 97 | PE0 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include TIM4_ETR, DCMI_D2, LCD_SEG36, FMC_NBL0 and TIM16_CH1. |
| 98 | PE1 | bidirectional | FT_l 5 V-tolerant I/O with LCD function supplied by VLCD; alternate functions include DCMI_D3, LCD_SEG37, FMC_NBL1 and TIM17_CH1. |
| 99 | VSS | power_in | Digital ground; all VSS pins must be connected to the external ground. |
| 100 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD, VDDA, VDDIO2, VDDUSB, VLCD, VBAT, VREF+) to VSS | VDDX-VSS | -0.3 | | 4 | V | | 124 |
| Input voltage on FT_xxx pins | VIN | -0.3 | | | V | Max printed as min(VDD, VDDA, VDDIO2, VDDUSB, VLCD)+4.0 (formula, see notes 3-4) | 124 |
| Input voltage on TT_xx pins | VIN | -0.3 | | 4 | V | | 124 |
| Input voltage on BOOT0 pin | VIN | 0 | | 9 | V | | 124 |
| Input voltage on any other pins | VIN | -0.3 | | 4 | V | | 124 |
| Variations between different VDDX power pins of the same domain | /ΔVDDx/ | | | 50 | mV | | 125 |
| Allowed voltage difference for VREF+ > VDDA | VREF+ - VDDA | | | 0.4 | V | | 125 |
| Total current into sum of all VDD power lines (source) | ∑IVDD | | | 150 | mA | | 125 |
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | | | 150 | mA | | 125 |
| Maximum current into each VDD power pin (source) | IVDD(PIN) | | | 100 | mA | | 125 |
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | | | 100 | mA | | 125 |
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | | | 20 | mA | | 125 |
| Output current sunk by any FT_f pin | IIO(PIN) | | | 20 | mA | | 125 |
| Output current sourced by any I/O and control pin | IIO(PIN) | | | 20 | mA | | 125 |
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | | | 100 | mA | | 125 |
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | | | 100 | mA | | 125 |
| Injected current on FT_xxx, TT_xx, RST and B pins | IINJ(PIN) | -5 | | 0 | mA | Except PA4, PA5 | 125 |
| Injected current on PA4, PA5 | IINJ(PIN) | -5 | | 0 | mA | PA4, PA5 | 125 |
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | | | 25 | mA | | 125 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 126 |
| Maximum junction temperature | TJ | | | 150 | °C | | 126 |
| Internal AHB clock frequency | fHCLK | 0 | | 80 | MHz | | 126 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 80 | MHz | | 126 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 80 | MHz | | 126 |
| Standard operating voltage | VDD | 1.71 | | 3.6 | V | | 126 |
| PG[15:2] I/Os supply voltage | VDDIO2 | 1.08 | | 3.6 | V | At least one I/O in PG[15:2] used | 126 |
| PG[15:2] I/Os supply voltage | VDDIO2 | 0 | | 3.6 | V | PG[15:2] not used | 126 |
| Analog supply voltage | VDDA | 1.62 | | 3.6 | V | ADC or COMP used | 126 |
| Analog supply voltage | VDDA | 1.8 | | | V | DAC or OPAMP used | 126 |
| Analog supply voltage | VDDA | 2.4 | | | V | VREFBUF used | 126 |
| Analog supply voltage | VDDA | 0 | | | V | ADC, DAC, OPAMP, COMP, VREFBUF not used | 126 |
| Backup operating voltage | VBAT | 1.55 | | 3.6 | V | | 126 |
| USB supply voltage | VDDUSB | 3 | | 3.6 | V | USB used | 126 |
| USB supply voltage | VDDUSB | 0 | | 3.6 | V | USB not used | 126 |
| I/O input voltage, TT_xx I/O | VIN | -0.3 | | | V | Max printed as VDDIOx+0.3 (formula) | 126 |
| I/O input voltage, BOOT0 | VIN | 0 | | 9 | V | | 126 |
| I/O input voltage, all I/O except BOOT0 and TT_xx | VIN | -0.3 | | | V | Max printed as min(min(VDD, VDDA, VDDIO2, VDDUSB, VLCD)+3.6 V, 5.5 V) (formula) | 126 |
| Power dissipation, LQFP100 | PD | | | 476 | mW | TA = 85 °C for suffix 6 | 127 |
| Ambient temperature for the suffix 6 version, maximum power dissipation | TA | -40 | | 85 | °C | Maximum power dissipation | 127 |
| Ambient temperature for the suffix 6 version, low-power dissipation | TA | -40 | | 105 | °C | Low-power dissipation | 127 |
| Junction temperature range, suffix 6 version | TJ | -40 | | 105 | °C | Suffix 6 version | 127 |
| VDD rise time rate | tVDD | 0 | | | µs/V | Max printed as ∞ | 127 |
| Reset temporization after BOR0 is detected | tRSTTEMPO | | 250 | 400 | µs | VDD rising | 128 |
| Brown-out reset threshold 0 | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 128 |
| Brown-out reset threshold 0 | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 128 |
| Brown-out reset threshold 1 | VBOR1 | 2.06 | 2.1 | 2.14 | V | Rising edge | 128 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2 | 2.04 | V | Falling edge | 128 |
| Brown-out reset threshold 2 | VBOR2 | 2.26 | 2.31 | 2.35 | V | Rising edge | 128 |
| Brown-out reset threshold 2 | VBOR2 | 2.16 | 2.2 | 2.24 | V | Falling edge | 128 |
| Brown-out reset threshold 3 | VBOR3 | 2.56 | 2.61 | 2.66 | V | Rising edge | 128 |
| Brown-out reset threshold 3 | VBOR3 | 2.47 | 2.52 | 2.57 | V | Falling edge | 128 |
| Brown-out reset threshold 4 | VBOR4 | 2.85 | 2.9 | 2.95 | V | Rising edge | 128 |
| Brown-out reset threshold 4 | VBOR4 | 2.76 | 2.81 | 2.86 | V | Falling edge | 128 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 130 |
| ADC sampling time when reading the internal reference voltage | tstart_vrefint | | 8 | 12 | µs | Start time of reference voltage buffer when ADC is enabled | 130 |
| Internal reference voltage spread over the temperature range | ∆VREFINT | | 5 | 7.5 | mV | VDD = 3 V | 130 |
| Average temperature coefficient | TCoeff | | 30 | 50 | ppm/°C | -40 °C < TA < +130 °C | 130 |
| Supply current in Run mode | IDD_ALL(Run) | | 9.44 | 10.3 | mA | Range 1, fHCLK = 80 MHz, all peripherals disabled, ART enable, TA = 25 °C | 132 |
| Supply current in Stop 2 mode, RTC disabled, LCD disabled | IDD_ALL(Stop 2) | | 2.69 | 5.4 | µA | VDD = 3 V, TA = 25 °C | 145 |
| Supply current in Standby mode (backup registers retained), RTC disabled, no independent watchdog | IDD_ALL(Standby) | | 133 | 318 | nA | VDD = 3 V, TA = 25 °C | 150 |
## CAD (KiCad official)
- Symbol: `STM32L496VGT6TR`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `stm32l496vgt6tr-etched.step` / `stm32l496vgt6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l496vgt6tr.step` / `stm32l496vgt6tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32l496vg.pdf) (280 pp, sha256 `07777c1c9ca126d7`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l496vgt6tr-datasheet.pdf)