component
STM32L476VGT6TR
Public Made by Adomby adom
STMICROELECTRONICS Global Sourcing Parts, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
23105ba
STM32L476VGT6TR
STMICROELECTRONICS · Global Sourcing Parts · LQFP-100(14x14)
STM32L476VGT6TR from STMICROELECTRONICS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | FT_l I/O (5 V tolerant, LCD) with TRACECK, TIM3_ETR, TSC_G7_IO1, LCD_SEG38, FMC_A23, SAI1_MCLK_A alternate functions. |
| 2 | PE3 | bidirectional | FT_l I/O with TRACED0, TIM3_CH1, TSC_G7_IO2, LCD_SEG39, FMC_A19, SAI1_SD_B alternate functions. |
| 3 | PE4 | bidirectional | FT I/O with TRACED1, TIM3_CH2, DFSDM1_DATIN3, TSC_G7_IO3, FMC_A20, SAI1_FS_A alternate functions. |
| 4 | PE5 | bidirectional | FT I/O with TRACED2, TIM3_CH3, DFSDM1_CKIN3, TSC_G7_IO4, FMC_A21, SAI1_SCK_A alternate functions. |
| 5 | PE6 | bidirectional | FT I/O with TRACED3, TIM3_CH4, FMC_A22, SAI1_SD_A alternate functions; additional function RTC_TAMP3/WKUP3. |
| 6 | VBAT | power_in | Backup domain supply for RTC and backup registers, operating range 1.55 V to 3.6 V. |
| 7 | PC13 | bidirectional | FT I/O powered through the backup power switch (3 mA sink limit, output speed max 2 MHz with 30 pF load, not a current source); additional functions RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2. |
| 8 | PC14-OSC32_IN | bidirectional | FT I/O (PC14) powered through the backup switch with the same output limits as PC13; additional function OSC32_IN for the 32 kHz LSE crystal. |
| 9 | PC15-OSC32_OUT | bidirectional | FT I/O (PC15) powered through the backup switch with the same output limits as PC13; additional function OSC32_OUT for the 32 kHz LSE crystal. |
| 10 | VSS | power_in | Digital ground supply pin. |
| 11 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | FT I/O (PH0) that serves as OSC_IN for the 4 to 48 MHz HSE crystal oscillator. |
| 13 | PH1-OSC_OUT | bidirectional | FT I/O (PH1) that serves as OSC_OUT for the 4 to 48 MHz HSE crystal oscillator. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | FT_fla I/O with LPTIM1_IN1, I2C3_SCL, DFSDM1_DATIN4, LPUART1_RX, LCD_SEG18, LPTIM2_IN1; additional function ADC123_IN1. |
| 16 | PC1 | bidirectional | FT_fla I/O with LPTIM1_OUT, I2C3_SDA, DFSDM1_CKIN4, LPUART1_TX, LCD_SEG19; additional function ADC123_IN2. |
| 17 | PC2 | bidirectional | FT_la I/O with LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT, LCD_SEG20; additional function ADC123_IN3. |
| 18 | PC3 | bidirectional | FT_a I/O with LPTIM1_ETR, SPI2_MOSI, LCD_VLCD, SAI1_SD_A, LPTIM2_ETR; additional function ADC123_IN4. |
| 19 | VSSA | power_in | Analog ground supply pin. |
| 20 | VREF- | power_in | Negative reference voltage for the ADC and analog peripherals (VREF- = VSSA). |
| 21 | VREF+ | power_in | Positive reference voltage input, also VREFBUF_OUT output of the internal voltage reference buffer. |
| 22 | VDDA | power_in | Analog supply: 1.62 V min with ADC/COMP, 1.8 V with DAC/OPAMP, 2.4 V with VREFBUF, up to 3.6 V. |
| 23 | PA0 | bidirectional | FT_a I/O with TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX; additional functions OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1. |
| 24 | PA1 | bidirectional | FT_la I/O with TIM2_CH2, TIM5_CH2, USART2_RTS_DE, UART4_RX, LCD_SEG0, TIM15_CH1N; additional functions OPAMP1_VINM, ADC12_IN6. |
| 25 | PA2 | bidirectional | FT_la I/O with TIM2_CH3, TIM5_CH3, USART2_TX, LCD_SEG1, SAI2_EXTCLK, TIM15_CH1; additional functions ADC12_IN7, WKUP4/LSCO. |
| 26 | PA3 | bidirectional | TT_la I/O (3.6 V tolerant) with TIM2_CH4, TIM5_CH4, USART2_RX, LCD_SEG2, TIM15_CH2; additional functions OPAMP1_VOUT, ADC12_IN8. |
| 27 | VSS | power_in | Digital ground supply pin. |
| 28 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
| 29 | PA4 | bidirectional | TT_a I/O with SPI1_NSS, SPI3_NSS, USART2_CK, SAI1_FS_B, LPTIM2_OUT; additional functions ADC12_IN9, DAC1_OUT1. |
| 30 | PA5 | bidirectional | TT_a I/O with TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK, LPTIM2_ETR; additional functions ADC12_IN10, DAC1_OUT2. |
| 31 | PA6 | bidirectional | FT_la I/O with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, USART3_CTS, QUADSPI_BK1_IO3, LCD_SEG3; additional functions OPAMP2_VINP, ADC12_IN11. |
| 32 | PA7 | bidirectional | FT_la I/O with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, QUADSPI_BK1_IO2, LCD_SEG4, TIM17_CH1; additional functions OPAMP2_VINM, ADC12_IN12. |
| 33 | PC4 | bidirectional | FT_la I/O with USART3_TX, LCD_SEG22; additional functions COMP1_INM, ADC12_IN13. |
| 34 | PC5 | bidirectional | FT_la I/O with USART3_RX, LCD_SEG23; additional functions COMP1_INP, ADC12_IN14, WKUP5. |
| 35 | PB0 | bidirectional | TT_la I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, USART3_CK, QUADSPI_BK1_IO1, LCD_SEG5, COMP1_OUT; additional functions OPAMP2_VOUT, ADC12_IN15. |
| 36 | PB1 | bidirectional | FT_la I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN0, USART3_RTS_DE, QUADSPI_BK1_IO0, LCD_SEG6, LPTIM2_IN1; additional functions COMP1_INM, ADC12_IN16. |
| 37 | PB2 | bidirectional | FT_a I/O with RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0; additional function COMP1_INP. |
| 38 | PE7 | bidirectional | FT I/O with TIM1_ETR, DFSDM1_DATIN2, FMC_D4, SAI1_SD_B alternate functions. |
| 39 | PE8 | bidirectional | FT I/O with TIM1_CH1N, DFSDM1_CKIN2, FMC_D5, SAI1_SCK_B alternate functions. |
| 40 | PE9 | bidirectional | FT I/O with TIM1_CH1, DFSDM1_CKOUT, FMC_D6, SAI1_FS_B alternate functions. |
| 41 | PE10 | bidirectional | FT I/O with TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, QUADSPI_CLK, FMC_D7, SAI1_MCLK_B alternate functions. |
| 42 | PE11 | bidirectional | FT I/O with TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, QUADSPI_NCS, FMC_D8 alternate functions. |
| 43 | PE12 | bidirectional | FT I/O with TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3, QUADSPI_BK1_IO0, FMC_D9 alternate functions. |
| 44 | PE13 | bidirectional | FT I/O with TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4, QUADSPI_BK1_IO1, FMC_D10 alternate functions. |
| 45 | PE14 | bidirectional | FT I/O with TIM1_CH4, TIM1_BKIN2, SPI1_MISO, QUADSPI_BK1_IO2, FMC_D11 alternate functions. |
| 46 | PE15 | bidirectional | FT I/O with TIM1_BKIN, TIM1_BKIN_COMP1, SPI1_MOSI, QUADSPI_BK1_IO3, FMC_D12 alternate functions. |
| 47 | PB10 | bidirectional | FT_fl I/O (Fm+ capable) with TIM2_CH3, I2C2_SCL, SPI2_SCK, DFSDM1_DATIN7, USART3_TX, LPUART1_RX, QUADSPI_CLK, LCD_SEG10, COMP1_OUT, SAI1_SCK_A. |
| 48 | PB11 | bidirectional | FT_fl I/O (Fm+ capable) with TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, LPUART1_TX, QUADSPI_NCS, LCD_SEG11, COMP2_OUT. |
| 49 | VSS | power_in | Digital ground supply pin. |
| 50 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
| 51 | PB12 | bidirectional | FT_l I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1, USART3_CK, LPUART1_RTS_DE, TSC_G1_IO1, LCD_SEG12, SWPMI1_IO, SAI2_FS_A, TIM15_BKIN. |
| 52 | PB13 | bidirectional | FT_fl I/O with TIM1_CH1N, I2C2_SCL, SPI2_SCK, DFSDM1_CKIN1, USART3_CTS, LPUART1_CTS, TSC_G1_IO2, LCD_SEG13, SWPMI1_TX, SAI2_SCK_A, TIM15_CH1N. |
| 53 | PB14 | bidirectional | FT_fl I/O with TIM1_CH2N, TIM8_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS_DE, TSC_G1_IO3, LCD_SEG14, SWPMI1_RX, SAI2_MCLK_A, TIM15_CH1. |
| 54 | PB15 | bidirectional | FT_l I/O with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, DFSDM1_CKIN2, TSC_G1_IO4, LCD_SEG15, SWPMI1_SUSPEND, SAI2_SD_A, TIM15_CH2. |
| 55 | PD8 | bidirectional | FT_l I/O with USART3_TX, LCD_SEG28, FMC_D13 alternate functions. |
| 56 | PD9 | bidirectional | FT_l I/O with USART3_RX, LCD_SEG29, FMC_D14, SAI2_MCLK_A alternate functions. |
| 57 | PD10 | bidirectional | FT_l I/O with USART3_CK, TSC_G6_IO1, LCD_SEG30, FMC_D15, SAI2_SCK_A alternate functions. |
| 58 | PD11 | bidirectional | FT_l I/O with USART3_CTS, TSC_G6_IO2, LCD_SEG31, FMC_A16, SAI2_SD_A, LPTIM2_ETR alternate functions. |
| 59 | PD12 | bidirectional | FT_l I/O with TIM4_CH1, USART3_RTS_DE, TSC_G6_IO3, LCD_SEG32, FMC_A17, SAI2_FS_A, LPTIM2_IN1 alternate functions. |
| 60 | PD13 | bidirectional | FT_l I/O with TIM4_CH2, TSC_G6_IO4, LCD_SEG33, FMC_A18, LPTIM2_OUT alternate functions. |
| 61 | PD14 | bidirectional | FT_l I/O with TIM4_CH3, LCD_SEG34, FMC_D0 alternate functions. |
| 62 | PD15 | bidirectional | FT_l I/O with TIM4_CH4, LCD_SEG35, FMC_D1 alternate functions. |
| 63 | PC6 | bidirectional | FT_l I/O with TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, TSC_G4_IO1, LCD_SEG24, SDMMC1_D6, SAI2_MCLK_A alternate functions. |
| 64 | PC7 | bidirectional | FT_l I/O with TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, TSC_G4_IO2, LCD_SEG25, SDMMC1_D7, SAI2_MCLK_B alternate functions. |
| 65 | PC8 | bidirectional | FT_l I/O with TIM3_CH3, TIM8_CH3, TSC_G4_IO3, LCD_SEG26, SDMMC1_D0 alternate functions. |
| 66 | PC9 | bidirectional | FT_l I/O with TIM8_BKIN2, TIM3_CH4, TIM8_CH4, TSC_G4_IO4, OTG_FS_NOE, LCD_SEG27, SDMMC1_D1, SAI2_EXTCLK alternate functions. |
| 67 | PA8 | bidirectional | FT_l I/O with MCO, TIM1_CH1, USART1_CK, OTG_FS_SOF, LCD_COM0, LPTIM2_OUT alternate functions. |
| 68 | PA9 | bidirectional | FT_lu I/O with TIM1_CH2, USART1_TX, LCD_COM1, TIM15_BKIN; additional function OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | FT_lu I/O with TIM1_CH3, USART1_RX, OTG_FS_ID, LCD_COM2, TIM17_BKIN alternate functions. |
| 70 | PA11 | bidirectional | FT_u I/O with TIM1_CH4, TIM1_BKIN2, USART1_CTS, CAN1_RX, OTG_FS_DM alternate functions. |
| 71 | PA12 | bidirectional | FT_u I/O with TIM1_ETR, USART1_RTS_DE, CAN1_TX, OTG_FS_DP alternate functions. |
| 72 | PA13 (JTMS-SWDIO) | bidirectional | FT I/O configured as JTMS-SWDIO after reset with internal pull-up active; also IR_OUT, OTG_FS_NOE. |
| 73 | VDDUSB | power_in | USB supply, 3.0 V to 3.6 V when USB is used. |
| 74 | VSS | power_in | Digital ground supply pin. |
| 75 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
| 76 | PA14 (JTCK-SWCLK) | bidirectional | FT I/O configured as JTCK-SWCLK after reset with internal pull-down active. |
| 77 | PA15 (JTDI) | bidirectional | FT_l I/O configured as JTDI after reset with internal pull-up active; also TIM2_CH1, TIM2_ETR, SPI1_NSS, SPI3_NSS, UART4_RTS_DE, TSC_G3_IO1, LCD_SEG17, SAI2_FS_B. |
| 78 | PC10 | bidirectional | FT_l I/O with SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, LCD_COM4/LCD_SEG28/LCD_SEG40, SDMMC1_D2, SAI2_SCK_B alternate functions. |
| 79 | PC11 | bidirectional | FT_l I/O with SPI3_MISO, USART3_RX, UART4_RX, TSC_G3_IO3, LCD_COM5/LCD_SEG29/LCD_SEG41, SDMMC1_D3, SAI2_MCLK_B alternate functions. |
| 80 | PC12 | bidirectional | FT_l I/O with SPI3_MOSI, USART3_CK, UART5_TX, TSC_G3_IO4, LCD_COM6/LCD_SEG30/LCD_SEG42, SDMMC1_CK, SAI2_SD_B alternate functions. |
| 81 | PD0 | bidirectional | FT I/O with SPI2_NSS, DFSDM1_DATIN7, CAN1_RX, FMC_D2 alternate functions. |
| 82 | PD1 | bidirectional | FT I/O with SPI2_SCK, DFSDM1_CKIN7, CAN1_TX, FMC_D3 alternate functions. |
| 83 | PD2 | bidirectional | FT_l I/O with TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, LCD_COM7/LCD_SEG31/LCD_SEG43, SDMMC1_CMD alternate functions. |
| 84 | PD3 | bidirectional | FT I/O with SPI2_MISO, DFSDM1_DATIN0, USART2_CTS, FMC_CLK alternate functions. |
| 85 | PD4 | bidirectional | FT I/O with SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, FMC_NOE alternate functions. |
| 86 | PD5 | bidirectional | FT I/O with USART2_TX, FMC_NWE alternate functions. |
| 87 | PD6 | bidirectional | FT I/O with DFSDM1_DATIN1, USART2_RX, FMC_NWAIT, SAI1_SD_A alternate functions. |
| 88 | PD7 | bidirectional | FT I/O with DFSDM1_CKIN1, USART2_CK, FMC_NE1 alternate functions. |
| 89 | PB3 (JTDO-TRACESWO) | bidirectional | FT_la I/O configured as JTDO-TRACESWO after reset, also TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE, LCD_SEG7, SAI1_SCK_B; additional function COMP2_INM. |
| 90 | PB4 (NJTRST) | bidirectional | FT_la I/O configured as NJTRST after reset with internal pull-up active, also TIM3_CH1, SPI1_MISO, SPI3_MISO, USART1_CTS, UART5_RTS_DE, TSC_G2_IO1, LCD_SEG8; additional function COMP2_INP. |
| 91 | PB5 | bidirectional | FT_la I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, UART5_CTS, TSC_G2_IO2, LCD_SEG9, COMP2_OUT, SAI1_SD_B. |
| 92 | PB6 | bidirectional | FT_fa I/O with LPTIM1_ETR, TIM4_CH1, TIM8_BKIN2, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, TSC_G2_IO3, SAI1_FS_B; additional function COMP2_INP. |
| 93 | PB7 | bidirectional | FT_fla I/O with LPTIM1_IN2, TIM4_CH2, TIM8_BKIN, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, UART4_CTS, TSC_G2_IO4, LCD_SEG21, FMC_NL; additional functions COMP2_INM, PVD_IN. |
| 94 | BOOT0 | input | Dedicated boot mode selection input pin; input voltage range 0 to 9 V. |
| 95 | PB8 | bidirectional | FT_fl I/O with TIM4_CH3, I2C1_SCL, DFSDM1_DATIN6, CAN1_RX, LCD_SEG16, SDMMC1_D4, SAI1_MCLK_A, TIM16_CH1 alternate functions. |
| 96 | PB9 | bidirectional | FT_fl I/O with IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, DFSDM1_CKIN6, CAN1_TX, LCD_COM3, SDMMC1_D5, SAI1_FS_A, TIM17_CH1 alternate functions. |
| 97 | PE0 | bidirectional | FT_l I/O with TIM4_ETR, LCD_SEG36, FMC_NBL0, TIM16_CH1 alternate functions. |
| 98 | PE1 | bidirectional | FT_l I/O with LCD_SEG37, FMC_NBL1, TIM17_CH1 alternate functions. |
| 99 | VSS | power_in | Digital ground supply pin. |
| 100 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMICROELECTRONICS |
| Package | LQFP-100(14x14) |
| Category | Global Sourcing Parts |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standard operating voltage | VDD | 1.71 | 3.6 | V | 113 | ||
| Internal AHB clock frequency | fHCLK | 0 | 80 | MHz | 113 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 80 | MHz | 113 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 80 | MHz | 113 | ||
| PG[15:2] I/Os supply voltage | VDDIO2 | 1.08 | 3.6 | V | At least one I/O in PG[15:2] used | 113 | |
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 113 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 113 | ||
| USB supply voltage | VDDUSB | 3 | 3.6 | V | USB used | 113 | |
| Power dissipation LQFP100 | PD | 476 | mW | TA = 85 °C for suffix 6, LQFP100 | 113 | ||
| Ambient temperature suffix 6, maximum power dissipation | TA | -40 | 85 | °C | Suffix 6, maximum power dissipation | 114 | |
| Ambient temperature suffix 6, low-power dissipation | TA | -40 | 105 | °C | Suffix 6, low-power dissipation | 114 | |
| Junction temperature suffix 6 | TJ | -40 | 105 | °C | Suffix 6 version | 114 | |
| External main supply voltage | VDDX - VSS | -0.3 | 4 | V | VDD, VDDA, VDDIO2, VDDUSB, VLCD, VBAT, VREF+ | 110 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 111 | ||
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | 111 | ||
| Variations between different VDDX power pins of same domain | /ΔVDDx/ | 50 | mV | 111 | |||
| Variations between all different ground pins | /VSSx-VSS/ | 50 | mV | 111 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ - VDDA | 0.4 | V | 111 | |||
| Total current into sum of all VDD power lines | ΣIVDD | 150 | mA | source | 111 | ||
| Total current out of sum of all VSS ground lines | ΣIVSS | 150 | mA | sink | 111 | ||
| Maximum current into each VDD power pin | IVDD(PIN) | 100 | mA | source | 111 | ||
| Maximum current out of each VSS ground pin | IVSS(PIN) | 100 | mA | sink | 111 | ||
| Output current sunk by any I/O and control pin | IIO(PIN) | 20 | mA | except FT_f | 111 | ||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 111 | |||
| Total output current sunk by all I/Os and control pins | ΣIIO(PIN) | 100 | mA | 111 | |||
| Total output current sourced by all I/Os and control pins | ΣIIO(PIN) | 100 | mA | 111 | |||
| Total injected current | Σ/IINJ(PIN)/ | 25 | mA | sum of all I/Os and control pins | 111 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 112 | ||
| Maximum junction temperature | TJ | 150 | °C | 112 | |||
| Brown-out reset threshold 0, rising | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 115 |
| Brown-out reset threshold 0, falling | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 115 |
| Brown-out reset threshold 1, rising | VBOR1 | 2.06 | 2.1 | 2.14 | V | Rising edge | 115 |
| Brown-out reset threshold 2, rising | VBOR2 | 2.26 | 2.31 | 2.35 | V | Rising edge | 115 |
| Brown-out reset threshold 3, rising | VBOR3 | 2.56 | 2.61 | 2.66 | V | Rising edge | 115 |
| Brown-out reset threshold 4, rising | VBOR4 | 2.85 | 2.9 | 2.95 | V | Rising edge | 115 |
| Reset temporization after BOR0 is detected | tRSTTEMPO | 250 | 400 | μs | VDD rising | 115 | |
| VDDUSB peripheral voltage monitoring | VPVM1 | 1.18 | 1.22 | 1.26 | V | 116 | |
| VDDIO2 peripheral voltage monitoring | VPVM2 | 0.92 | 0.96 | 1 | V | 116 | |
| BOR (except BOR0) and PVD consumption from VDD | IDD(BOR_PVD) | 1.1 | 1.6 | µA | 116 | ||
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 117 |
| Average temperature coefficient of VREFINT | TCoeff | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 117 | |
| Run mode supply current, Range 1, 80 MHz, 25 °C | IDD_ALL(Run) | 10.2 | 11.22 | mA | ART enable, fHCLK 80 MHz, 25 °C, Range 1 | 120 | |
| Run mode supply current, Range 1, 80 MHz, 85 °C | IDD_ALL(Run) | 10.5 | 12.1 | mA | ART enable, fHCLK 80 MHz, 85 °C, Range 1 | 120 | |
| Low-power run supply current, 2 MHz, 25 °C | IDD_ALL(LPRun) | 272 | 330 | µA | ART enable, fHCLK = fMSI 2 MHz, 25 °C | 120 | |
| Stop 2 supply current, 1.8 V, 25 °C | IDD_ALL(Stop 2) | 1.14 | 2.7 | µA | RTC disabled, LCD disabled, VDD 1.8 V, 25 °C | 133 | |
| Stop 2 supply current, 3 V, 85 °C | IDD_ALL(Stop 2) | 15.4 | 39 | µA | RTC disabled, LCD disabled, VDD 3 V, 85 °C | 133 | |
| Stop 1 supply current, 3 V, 25 °C | IDD_ALL(Stop 1) | 6.65 | 17 | µA | RTC disabled, LCD disabled, VDD 3 V, 25 °C | 134 |
CAD (KiCad official)
- Symbol:
STM32L476VGT6TR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32l476vgt6tr-etched.step/stm32l476vgt6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l476vgt6tr.step/stm32l476vgt6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMICROELECTRONICS datasheet (270 pp, sha256
a45a857e3aa75ac1, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L476VGT6TR
**STMICROELECTRONICS** · Global Sourcing Parts · LQFP-100(14x14)
STM32L476VGT6TR from STMICROELECTRONICS, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | FT_l I/O (5 V tolerant, LCD) with TRACECK, TIM3_ETR, TSC_G7_IO1, LCD_SEG38, FMC_A23, SAI1_MCLK_A alternate functions. |
| 2 | PE3 | bidirectional | FT_l I/O with TRACED0, TIM3_CH1, TSC_G7_IO2, LCD_SEG39, FMC_A19, SAI1_SD_B alternate functions. |
| 3 | PE4 | bidirectional | FT I/O with TRACED1, TIM3_CH2, DFSDM1_DATIN3, TSC_G7_IO3, FMC_A20, SAI1_FS_A alternate functions. |
| 4 | PE5 | bidirectional | FT I/O with TRACED2, TIM3_CH3, DFSDM1_CKIN3, TSC_G7_IO4, FMC_A21, SAI1_SCK_A alternate functions. |
| 5 | PE6 | bidirectional | FT I/O with TRACED3, TIM3_CH4, FMC_A22, SAI1_SD_A alternate functions; additional function RTC_TAMP3/WKUP3. |
| 6 | VBAT | power_in | Backup domain supply for RTC and backup registers, operating range 1.55 V to 3.6 V. |
| 7 | PC13 | bidirectional | FT I/O powered through the backup power switch (3 mA sink limit, output speed max 2 MHz with 30 pF load, not a current source); additional functions RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2. |
| 8 | PC14-OSC32_IN | bidirectional | FT I/O (PC14) powered through the backup switch with the same output limits as PC13; additional function OSC32_IN for the 32 kHz LSE crystal. |
| 9 | PC15-OSC32_OUT | bidirectional | FT I/O (PC15) powered through the backup switch with the same output limits as PC13; additional function OSC32_OUT for the 32 kHz LSE crystal. |
| 10 | VSS | power_in | Digital ground supply pin. |
| 11 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | FT I/O (PH0) that serves as OSC_IN for the 4 to 48 MHz HSE crystal oscillator. |
| 13 | PH1-OSC_OUT | bidirectional | FT I/O (PH1) that serves as OSC_OUT for the 4 to 48 MHz HSE crystal oscillator. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | FT_fla I/O with LPTIM1_IN1, I2C3_SCL, DFSDM1_DATIN4, LPUART1_RX, LCD_SEG18, LPTIM2_IN1; additional function ADC123_IN1. |
| 16 | PC1 | bidirectional | FT_fla I/O with LPTIM1_OUT, I2C3_SDA, DFSDM1_CKIN4, LPUART1_TX, LCD_SEG19; additional function ADC123_IN2. |
| 17 | PC2 | bidirectional | FT_la I/O with LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT, LCD_SEG20; additional function ADC123_IN3. |
| 18 | PC3 | bidirectional | FT_a I/O with LPTIM1_ETR, SPI2_MOSI, LCD_VLCD, SAI1_SD_A, LPTIM2_ETR; additional function ADC123_IN4. |
| 19 | VSSA | power_in | Analog ground supply pin. |
| 20 | VREF- | power_in | Negative reference voltage for the ADC and analog peripherals (VREF- = VSSA). |
| 21 | VREF+ | power_in | Positive reference voltage input, also VREFBUF_OUT output of the internal voltage reference buffer. |
| 22 | VDDA | power_in | Analog supply: 1.62 V min with ADC/COMP, 1.8 V with DAC/OPAMP, 2.4 V with VREFBUF, up to 3.6 V. |
| 23 | PA0 | bidirectional | FT_a I/O with TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX; additional functions OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1. |
| 24 | PA1 | bidirectional | FT_la I/O with TIM2_CH2, TIM5_CH2, USART2_RTS_DE, UART4_RX, LCD_SEG0, TIM15_CH1N; additional functions OPAMP1_VINM, ADC12_IN6. |
| 25 | PA2 | bidirectional | FT_la I/O with TIM2_CH3, TIM5_CH3, USART2_TX, LCD_SEG1, SAI2_EXTCLK, TIM15_CH1; additional functions ADC12_IN7, WKUP4/LSCO. |
| 26 | PA3 | bidirectional | TT_la I/O (3.6 V tolerant) with TIM2_CH4, TIM5_CH4, USART2_RX, LCD_SEG2, TIM15_CH2; additional functions OPAMP1_VOUT, ADC12_IN8. |
| 27 | VSS | power_in | Digital ground supply pin. |
| 28 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
| 29 | PA4 | bidirectional | TT_a I/O with SPI1_NSS, SPI3_NSS, USART2_CK, SAI1_FS_B, LPTIM2_OUT; additional functions ADC12_IN9, DAC1_OUT1. |
| 30 | PA5 | bidirectional | TT_a I/O with TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK, LPTIM2_ETR; additional functions ADC12_IN10, DAC1_OUT2. |
| 31 | PA6 | bidirectional | FT_la I/O with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, USART3_CTS, QUADSPI_BK1_IO3, LCD_SEG3; additional functions OPAMP2_VINP, ADC12_IN11. |
| 32 | PA7 | bidirectional | FT_la I/O with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, QUADSPI_BK1_IO2, LCD_SEG4, TIM17_CH1; additional functions OPAMP2_VINM, ADC12_IN12. |
| 33 | PC4 | bidirectional | FT_la I/O with USART3_TX, LCD_SEG22; additional functions COMP1_INM, ADC12_IN13. |
| 34 | PC5 | bidirectional | FT_la I/O with USART3_RX, LCD_SEG23; additional functions COMP1_INP, ADC12_IN14, WKUP5. |
| 35 | PB0 | bidirectional | TT_la I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, USART3_CK, QUADSPI_BK1_IO1, LCD_SEG5, COMP1_OUT; additional functions OPAMP2_VOUT, ADC12_IN15. |
| 36 | PB1 | bidirectional | FT_la I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN0, USART3_RTS_DE, QUADSPI_BK1_IO0, LCD_SEG6, LPTIM2_IN1; additional functions COMP1_INM, ADC12_IN16. |
| 37 | PB2 | bidirectional | FT_a I/O with RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0; additional function COMP1_INP. |
| 38 | PE7 | bidirectional | FT I/O with TIM1_ETR, DFSDM1_DATIN2, FMC_D4, SAI1_SD_B alternate functions. |
| 39 | PE8 | bidirectional | FT I/O with TIM1_CH1N, DFSDM1_CKIN2, FMC_D5, SAI1_SCK_B alternate functions. |
| 40 | PE9 | bidirectional | FT I/O with TIM1_CH1, DFSDM1_CKOUT, FMC_D6, SAI1_FS_B alternate functions. |
| 41 | PE10 | bidirectional | FT I/O with TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, QUADSPI_CLK, FMC_D7, SAI1_MCLK_B alternate functions. |
| 42 | PE11 | bidirectional | FT I/O with TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, QUADSPI_NCS, FMC_D8 alternate functions. |
| 43 | PE12 | bidirectional | FT I/O with TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3, QUADSPI_BK1_IO0, FMC_D9 alternate functions. |
| 44 | PE13 | bidirectional | FT I/O with TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4, QUADSPI_BK1_IO1, FMC_D10 alternate functions. |
| 45 | PE14 | bidirectional | FT I/O with TIM1_CH4, TIM1_BKIN2, SPI1_MISO, QUADSPI_BK1_IO2, FMC_D11 alternate functions. |
| 46 | PE15 | bidirectional | FT I/O with TIM1_BKIN, TIM1_BKIN_COMP1, SPI1_MOSI, QUADSPI_BK1_IO3, FMC_D12 alternate functions. |
| 47 | PB10 | bidirectional | FT_fl I/O (Fm+ capable) with TIM2_CH3, I2C2_SCL, SPI2_SCK, DFSDM1_DATIN7, USART3_TX, LPUART1_RX, QUADSPI_CLK, LCD_SEG10, COMP1_OUT, SAI1_SCK_A. |
| 48 | PB11 | bidirectional | FT_fl I/O (Fm+ capable) with TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, LPUART1_TX, QUADSPI_NCS, LCD_SEG11, COMP2_OUT. |
| 49 | VSS | power_in | Digital ground supply pin. |
| 50 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
| 51 | PB12 | bidirectional | FT_l I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1, USART3_CK, LPUART1_RTS_DE, TSC_G1_IO1, LCD_SEG12, SWPMI1_IO, SAI2_FS_A, TIM15_BKIN. |
| 52 | PB13 | bidirectional | FT_fl I/O with TIM1_CH1N, I2C2_SCL, SPI2_SCK, DFSDM1_CKIN1, USART3_CTS, LPUART1_CTS, TSC_G1_IO2, LCD_SEG13, SWPMI1_TX, SAI2_SCK_A, TIM15_CH1N. |
| 53 | PB14 | bidirectional | FT_fl I/O with TIM1_CH2N, TIM8_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS_DE, TSC_G1_IO3, LCD_SEG14, SWPMI1_RX, SAI2_MCLK_A, TIM15_CH1. |
| 54 | PB15 | bidirectional | FT_l I/O with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, DFSDM1_CKIN2, TSC_G1_IO4, LCD_SEG15, SWPMI1_SUSPEND, SAI2_SD_A, TIM15_CH2. |
| 55 | PD8 | bidirectional | FT_l I/O with USART3_TX, LCD_SEG28, FMC_D13 alternate functions. |
| 56 | PD9 | bidirectional | FT_l I/O with USART3_RX, LCD_SEG29, FMC_D14, SAI2_MCLK_A alternate functions. |
| 57 | PD10 | bidirectional | FT_l I/O with USART3_CK, TSC_G6_IO1, LCD_SEG30, FMC_D15, SAI2_SCK_A alternate functions. |
| 58 | PD11 | bidirectional | FT_l I/O with USART3_CTS, TSC_G6_IO2, LCD_SEG31, FMC_A16, SAI2_SD_A, LPTIM2_ETR alternate functions. |
| 59 | PD12 | bidirectional | FT_l I/O with TIM4_CH1, USART3_RTS_DE, TSC_G6_IO3, LCD_SEG32, FMC_A17, SAI2_FS_A, LPTIM2_IN1 alternate functions. |
| 60 | PD13 | bidirectional | FT_l I/O with TIM4_CH2, TSC_G6_IO4, LCD_SEG33, FMC_A18, LPTIM2_OUT alternate functions. |
| 61 | PD14 | bidirectional | FT_l I/O with TIM4_CH3, LCD_SEG34, FMC_D0 alternate functions. |
| 62 | PD15 | bidirectional | FT_l I/O with TIM4_CH4, LCD_SEG35, FMC_D1 alternate functions. |
| 63 | PC6 | bidirectional | FT_l I/O with TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, TSC_G4_IO1, LCD_SEG24, SDMMC1_D6, SAI2_MCLK_A alternate functions. |
| 64 | PC7 | bidirectional | FT_l I/O with TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, TSC_G4_IO2, LCD_SEG25, SDMMC1_D7, SAI2_MCLK_B alternate functions. |
| 65 | PC8 | bidirectional | FT_l I/O with TIM3_CH3, TIM8_CH3, TSC_G4_IO3, LCD_SEG26, SDMMC1_D0 alternate functions. |
| 66 | PC9 | bidirectional | FT_l I/O with TIM8_BKIN2, TIM3_CH4, TIM8_CH4, TSC_G4_IO4, OTG_FS_NOE, LCD_SEG27, SDMMC1_D1, SAI2_EXTCLK alternate functions. |
| 67 | PA8 | bidirectional | FT_l I/O with MCO, TIM1_CH1, USART1_CK, OTG_FS_SOF, LCD_COM0, LPTIM2_OUT alternate functions. |
| 68 | PA9 | bidirectional | FT_lu I/O with TIM1_CH2, USART1_TX, LCD_COM1, TIM15_BKIN; additional function OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | FT_lu I/O with TIM1_CH3, USART1_RX, OTG_FS_ID, LCD_COM2, TIM17_BKIN alternate functions. |
| 70 | PA11 | bidirectional | FT_u I/O with TIM1_CH4, TIM1_BKIN2, USART1_CTS, CAN1_RX, OTG_FS_DM alternate functions. |
| 71 | PA12 | bidirectional | FT_u I/O with TIM1_ETR, USART1_RTS_DE, CAN1_TX, OTG_FS_DP alternate functions. |
| 72 | PA13 (JTMS-SWDIO) | bidirectional | FT I/O configured as JTMS-SWDIO after reset with internal pull-up active; also IR_OUT, OTG_FS_NOE. |
| 73 | VDDUSB | power_in | USB supply, 3.0 V to 3.6 V when USB is used. |
| 74 | VSS | power_in | Digital ground supply pin. |
| 75 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
| 76 | PA14 (JTCK-SWCLK) | bidirectional | FT I/O configured as JTCK-SWCLK after reset with internal pull-down active. |
| 77 | PA15 (JTDI) | bidirectional | FT_l I/O configured as JTDI after reset with internal pull-up active; also TIM2_CH1, TIM2_ETR, SPI1_NSS, SPI3_NSS, UART4_RTS_DE, TSC_G3_IO1, LCD_SEG17, SAI2_FS_B. |
| 78 | PC10 | bidirectional | FT_l I/O with SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, LCD_COM4/LCD_SEG28/LCD_SEG40, SDMMC1_D2, SAI2_SCK_B alternate functions. |
| 79 | PC11 | bidirectional | FT_l I/O with SPI3_MISO, USART3_RX, UART4_RX, TSC_G3_IO3, LCD_COM5/LCD_SEG29/LCD_SEG41, SDMMC1_D3, SAI2_MCLK_B alternate functions. |
| 80 | PC12 | bidirectional | FT_l I/O with SPI3_MOSI, USART3_CK, UART5_TX, TSC_G3_IO4, LCD_COM6/LCD_SEG30/LCD_SEG42, SDMMC1_CK, SAI2_SD_B alternate functions. |
| 81 | PD0 | bidirectional | FT I/O with SPI2_NSS, DFSDM1_DATIN7, CAN1_RX, FMC_D2 alternate functions. |
| 82 | PD1 | bidirectional | FT I/O with SPI2_SCK, DFSDM1_CKIN7, CAN1_TX, FMC_D3 alternate functions. |
| 83 | PD2 | bidirectional | FT_l I/O with TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, LCD_COM7/LCD_SEG31/LCD_SEG43, SDMMC1_CMD alternate functions. |
| 84 | PD3 | bidirectional | FT I/O with SPI2_MISO, DFSDM1_DATIN0, USART2_CTS, FMC_CLK alternate functions. |
| 85 | PD4 | bidirectional | FT I/O with SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, FMC_NOE alternate functions. |
| 86 | PD5 | bidirectional | FT I/O with USART2_TX, FMC_NWE alternate functions. |
| 87 | PD6 | bidirectional | FT I/O with DFSDM1_DATIN1, USART2_RX, FMC_NWAIT, SAI1_SD_A alternate functions. |
| 88 | PD7 | bidirectional | FT I/O with DFSDM1_CKIN1, USART2_CK, FMC_NE1 alternate functions. |
| 89 | PB3 (JTDO-TRACESWO) | bidirectional | FT_la I/O configured as JTDO-TRACESWO after reset, also TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE, LCD_SEG7, SAI1_SCK_B; additional function COMP2_INM. |
| 90 | PB4 (NJTRST) | bidirectional | FT_la I/O configured as NJTRST after reset with internal pull-up active, also TIM3_CH1, SPI1_MISO, SPI3_MISO, USART1_CTS, UART5_RTS_DE, TSC_G2_IO1, LCD_SEG8; additional function COMP2_INP. |
| 91 | PB5 | bidirectional | FT_la I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, UART5_CTS, TSC_G2_IO2, LCD_SEG9, COMP2_OUT, SAI1_SD_B. |
| 92 | PB6 | bidirectional | FT_fa I/O with LPTIM1_ETR, TIM4_CH1, TIM8_BKIN2, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, TSC_G2_IO3, SAI1_FS_B; additional function COMP2_INP. |
| 93 | PB7 | bidirectional | FT_fla I/O with LPTIM1_IN2, TIM4_CH2, TIM8_BKIN, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, UART4_CTS, TSC_G2_IO4, LCD_SEG21, FMC_NL; additional functions COMP2_INM, PVD_IN. |
| 94 | BOOT0 | input | Dedicated boot mode selection input pin; input voltage range 0 to 9 V. |
| 95 | PB8 | bidirectional | FT_fl I/O with TIM4_CH3, I2C1_SCL, DFSDM1_DATIN6, CAN1_RX, LCD_SEG16, SDMMC1_D4, SAI1_MCLK_A, TIM16_CH1 alternate functions. |
| 96 | PB9 | bidirectional | FT_fl I/O with IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, DFSDM1_CKIN6, CAN1_TX, LCD_COM3, SDMMC1_D5, SAI1_FS_A, TIM17_CH1 alternate functions. |
| 97 | PE0 | bidirectional | FT_l I/O with TIM4_ETR, LCD_SEG36, FMC_NBL0, TIM16_CH1 alternate functions. |
| 98 | PE1 | bidirectional | FT_l I/O with LCD_SEG37, FMC_NBL1, TIM17_CH1 alternate functions. |
| 99 | VSS | power_in | Digital ground supply pin. |
| 100 | VDD | power_in | Digital supply pin, 1.71 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMICROELECTRONICS |
| Package | LQFP-100(14x14) |
| Category | Global Sourcing Parts |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standard operating voltage | VDD | 1.71 | | 3.6 | V | | 113 |
| Internal AHB clock frequency | fHCLK | 0 | | 80 | MHz | | 113 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 80 | MHz | | 113 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 80 | MHz | | 113 |
| PG[15:2] I/Os supply voltage | VDDIO2 | 1.08 | | 3.6 | V | At least one I/O in PG[15:2] used | 113 |
| Analog supply voltage | VDDA | 1.62 | | 3.6 | V | ADC or COMP used | 113 |
| Backup operating voltage | VBAT | 1.55 | | 3.6 | V | | 113 |
| USB supply voltage | VDDUSB | 3 | | 3.6 | V | USB used | 113 |
| Power dissipation LQFP100 | PD | | | 476 | mW | TA = 85 °C for suffix 6, LQFP100 | 113 |
| Ambient temperature suffix 6, maximum power dissipation | TA | -40 | | 85 | °C | Suffix 6, maximum power dissipation | 114 |
| Ambient temperature suffix 6, low-power dissipation | TA | -40 | | 105 | °C | Suffix 6, low-power dissipation | 114 |
| Junction temperature suffix 6 | TJ | -40 | | 105 | °C | Suffix 6 version | 114 |
| External main supply voltage | VDDX - VSS | -0.3 | | 4 | V | VDD, VDDA, VDDIO2, VDDUSB, VLCD, VBAT, VREF+ | 110 |
| Input voltage on BOOT0 pin | VIN | 0 | | 9 | V | | 111 |
| Input voltage on TT_xx pins | VIN | -0.3 | | 4 | V | | 111 |
| Variations between different VDDX power pins of same domain | /ΔVDDx/ | | | 50 | mV | | 111 |
| Variations between all different ground pins | /VSSx-VSS/ | | | 50 | mV | | 111 |
| Allowed voltage difference for VREF+ > VDDA | VREF+ - VDDA | | | 0.4 | V | | 111 |
| Total current into sum of all VDD power lines | ΣIVDD | | | 150 | mA | source | 111 |
| Total current out of sum of all VSS ground lines | ΣIVSS | | | 150 | mA | sink | 111 |
| Maximum current into each VDD power pin | IVDD(PIN) | | | 100 | mA | source | 111 |
| Maximum current out of each VSS ground pin | IVSS(PIN) | | | 100 | mA | sink | 111 |
| Output current sunk by any I/O and control pin | IIO(PIN) | | | 20 | mA | except FT_f | 111 |
| Output current sourced by any I/O and control pin | IIO(PIN) | | | 20 | mA | | 111 |
| Total output current sunk by all I/Os and control pins | ΣIIO(PIN) | | | 100 | mA | | 111 |
| Total output current sourced by all I/Os and control pins | ΣIIO(PIN) | | | 100 | mA | | 111 |
| Total injected current | Σ/IINJ(PIN)/ | | | 25 | mA | sum of all I/Os and control pins | 111 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 112 |
| Maximum junction temperature | TJ | | | 150 | °C | | 112 |
| Brown-out reset threshold 0, rising | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 115 |
| Brown-out reset threshold 0, falling | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 115 |
| Brown-out reset threshold 1, rising | VBOR1 | 2.06 | 2.1 | 2.14 | V | Rising edge | 115 |
| Brown-out reset threshold 2, rising | VBOR2 | 2.26 | 2.31 | 2.35 | V | Rising edge | 115 |
| Brown-out reset threshold 3, rising | VBOR3 | 2.56 | 2.61 | 2.66 | V | Rising edge | 115 |
| Brown-out reset threshold 4, rising | VBOR4 | 2.85 | 2.9 | 2.95 | V | Rising edge | 115 |
| Reset temporization after BOR0 is detected | tRSTTEMPO | | 250 | 400 | μs | VDD rising | 115 |
| VDDUSB peripheral voltage monitoring | VPVM1 | 1.18 | 1.22 | 1.26 | V | | 116 |
| VDDIO2 peripheral voltage monitoring | VPVM2 | 0.92 | 0.96 | 1 | V | | 116 |
| BOR (except BOR0) and PVD consumption from VDD | IDD(BOR_PVD) | | 1.1 | 1.6 | µA | | 116 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 117 |
| Average temperature coefficient of VREFINT | TCoeff | | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 117 |
| Run mode supply current, Range 1, 80 MHz, 25 °C | IDD_ALL(Run) | | 10.2 | 11.22 | mA | ART enable, fHCLK 80 MHz, 25 °C, Range 1 | 120 |
| Run mode supply current, Range 1, 80 MHz, 85 °C | IDD_ALL(Run) | | 10.5 | 12.1 | mA | ART enable, fHCLK 80 MHz, 85 °C, Range 1 | 120 |
| Low-power run supply current, 2 MHz, 25 °C | IDD_ALL(LPRun) | | 272 | 330 | µA | ART enable, fHCLK = fMSI 2 MHz, 25 °C | 120 |
| Stop 2 supply current, 1.8 V, 25 °C | IDD_ALL(Stop 2) | | 1.14 | 2.7 | µA | RTC disabled, LCD disabled, VDD 1.8 V, 25 °C | 133 |
| Stop 2 supply current, 3 V, 85 °C | IDD_ALL(Stop 2) | | 15.4 | 39 | µA | RTC disabled, LCD disabled, VDD 3 V, 85 °C | 133 |
| Stop 1 supply current, 3 V, 25 °C | IDD_ALL(Stop 1) | | 6.65 | 17 | µA | RTC disabled, LCD disabled, VDD 3 V, 25 °C | 134 |
## CAD (KiCad official)
- Symbol: `STM32L476VGT6TR`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `stm32l476vgt6tr-etched.step` / `stm32l476vgt6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l476vgt6tr.step` / `stm32l476vgt6tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMICROELECTRONICS datasheet](https://www.st.com/resource/en/datasheet/stm32l476vgt6tr.pdf) (270 pp, sha256 `a45a857e3aa75ac1`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l476vgt6tr-datasheet.pdf)