component
STM32L475VET6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32L475VET6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32L475VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5V-tolerant I/O with alternate functions TRACECK, TIM3_ETR, TSC_G7_IO1, FMC_A23, SAI1_MCLK_A and EVENTOUT. |
| 2 | PE3 | bidirectional | 5V-tolerant I/O with alternate functions TRACED0, TIM3_CH1, TSC_G7_IO2, FMC_A19, SAI1_SD_B and EVENTOUT. |
| 3 | PE4 | bidirectional | 5V-tolerant I/O with alternate functions TRACED1, TIM3_CH2, DFSDM1_DATIN3, TSC_G7_IO3, FMC_A20, SAI1_FS_A and EVENTOUT. |
| 4 | PE5 | bidirectional | 5V-tolerant I/O with alternate functions TRACED2, TIM3_CH3, DFSDM1_CKIN3, TSC_G7_IO4, FMC_A21, SAI1_SCK_A and EVENTOUT. |
| 5 | PE6 | bidirectional | 5V-tolerant I/O with alternate functions TRACED3, TIM3_CH4, FMC_A22, SAI1_SD_A, EVENTOUT and additional function RTC_TAMP3/WKUP3. |
| 6 | VBAT | power_in | Backup battery supply pin, operating voltage 1.55 V to 3.6 V, powers the RTC, LSE oscillator and backup registers when VDD is absent. |
| 7 | PC13 | bidirectional | 5V-tolerant I/O supplied through the internal power switch (output mode limited to 2 MHz/30 pF, 3 mA sink) with alternate function EVENTOUT and additional functions RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2. |
| 8 | PC14-OSC32_IN | bidirectional | 5V-tolerant I/O supplied through the power switch, usable as the 32.768 kHz LSE oscillator input (OSC32_IN) or GPIO with EVENTOUT alternate function. |
| 9 | PC15-OSC32_OUT | bidirectional | 5V-tolerant I/O supplied through the power switch, usable as the 32.768 kHz LSE oscillator output (OSC32_OUT) or GPIO with EVENTOUT alternate function. |
| 10 | VSS | power_in | Digital ground supply pin. |
| 11 | VDD | power_in | Digital power supply pin, standard operating voltage 1.71 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | 5V-tolerant I/O usable as the HSE crystal oscillator input (OSC_IN) or GPIO with EVENTOUT alternate function. |
| 13 | PH1-OSC_OUT | bidirectional | 5V-tolerant I/O usable as the HSE crystal oscillator output (OSC_OUT) or GPIO with EVENTOUT alternate function. |
| 14 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor; driving it low resets the device. |
| 15 | PC0 | bidirectional | 5V-tolerant, Fm+ and analog-switch capable I/O with alternate functions LPTIM1_IN1, I2C3_SCL, DFSDM1_DATIN4, LPUART1_RX, LPTIM2_IN1, EVENTOUT and additional function ADC123_IN1. |
| 16 | PC1 | bidirectional | 5V-tolerant, Fm+ and analog-switch capable I/O with alternate functions LPTIM1_OUT, I2C3_SDA, DFSDM1_CKIN4, LPUART1_TX, EVENTOUT and additional function ADC123_IN2. |
| 17 | PC2 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT, EVENTOUT and additional function ADC123_IN3. |
| 18 | PC3 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions LPTIM1_ETR, SPI2_MOSI, SAI1_SD_A, LPTIM2_ETR, EVENTOUT and additional function ADC123_IN4. |
| 19 | VSSA | power_in | Analog ground supply pin. |
| 20 | VREF- | power_in | Negative reference voltage pin for the ADC/DAC, minimum -VSSA. |
| 21 | VREF+ | power_in | Positive reference voltage pin for the ADC/DAC (2 V to VDDA when VDDA >= 2 V), also usable as VREFBUF_OUT, the voltage reference buffer output. |
| 22 | VDDA | power_in | Analog power supply pin, 1.62 V to 3.6 V (minimum depends on which analog peripheral -ADC, DAC, OPAMP, COMP, VREFBUF- is used). |
| 23 | PA0 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI1_EXTCLK, TIM2_ETR, EVENTOUT and additional functions OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1. |
| 24 | PA1 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS_DE, UART4_RX, TIM15_CH1N, EVENTOUT and additional functions OPAMP1_VINM, ADC12_IN6. |
| 25 | PA2 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions TIM2_CH3, TIM5_CH3, USART2_TX, SAI2_EXTCLK, TIM15_CH1, EVENTOUT and additional functions ADC12_IN7, WKUP4/LSCO. |
| 26 | PA3 | bidirectional | 3.6V-tolerant, analog-switch capable I/O with alternate functions TIM2_CH4, TIM5_CH4, USART2_RX, TIM15_CH2, EVENTOUT and additional functions OPAMP1_VOUT, ADC12_IN8. |
| 27 | VSS | power_in | Digital ground supply pin. |
| 28 | VDD | power_in | Digital power supply pin, standard operating voltage 1.71 V to 3.6 V. |
| 29 | PA4 | bidirectional | 3.6V-tolerant, analog-switch capable I/O with alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, SAI1_FS_B, LPTIM2_OUT, EVENTOUT and additional functions ADC12_IN9, DAC1_OUT1. |
| 30 | PA5 | bidirectional | 3.6V-tolerant, analog-switch capable I/O with alternate functions TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK, LPTIM2_ETR, EVENTOUT and additional functions ADC12_IN10, DAC1_OUT2. |
| 31 | PA6 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, USART3_CTS, QUADSPI_BK1_IO3, TIM1_BKIN_COMP2, TIM8_BKIN_COMP2, TIM16_CH1, EVENTOUT and additional functions OPAMP2_VINP, ADC12_IN11. |
| 32 | PA7 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, QUADSPI_BK1_IO2, TIM17_CH1, EVENTOUT and additional functions OPAMP2_VINM, ADC12_IN12. |
| 33 | PC4 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions USART3_TX, EVENTOUT and additional functions COMP1_INM, ADC12_IN13. |
| 34 | PC5 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions USART3_RX, EVENTOUT and additional functions COMP1_INP, ADC12_IN14, WKUP5. |
| 35 | PB0 | bidirectional | 3.6V-tolerant, analog-switch capable I/O with alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, USART3_CK, QUADSPI_BK1_IO1, COMP1_OUT, EVENTOUT and additional functions OPAMP2_VOUT, ADC12_IN15. |
| 36 | PB1 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN0, USART3_RTS_DE, QUADSPI_BK1_IO0, LPTIM2_IN1, EVENTOUT and additional functions COMP1_INM, ADC12_IN16. |
| 37 | PB2 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0, EVENTOUT and additional function COMP1_INP. |
| 38 | PE7 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_ETR, DFSDM1_DATIN2, FMC_D4, SAI1_SD_B and EVENTOUT. |
| 39 | PE8 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_CH1N, DFSDM1_CKIN2, FMC_D5, SAI1_SCK_B and EVENTOUT. |
| 40 | PE9 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_CH1, DFSDM1_CKOUT, FMC_D6, SAI1_FS_B and EVENTOUT. |
| 41 | PE10 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_CH2N, DFSDM1_DATIN4, TSC_G5_IO1, FMC_D7, QUADSPI_CLK, SAI1_MCLK_B and EVENTOUT. |
| 42 | PE11 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_CH2, DFSDM1_CKIN4, TSC_G5_IO2, QUADSPI_NCS, FMC_D8 and EVENTOUT. |
| 43 | PE12 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_CH3N, SPI1_NSS, DFSDM1_DATIN5, TSC_G5_IO3, QUADSPI_BK1_IO0, FMC_D9 and EVENTOUT. |
| 44 | PE13 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_CH3, SPI1_SCK, DFSDM1_CKIN5, TSC_G5_IO4, QUADSPI_BK1_IO1, FMC_D10 and EVENTOUT. |
| 45 | PE14 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_CH4, TIM1_BKIN2, TIM1_BKIN2_COMP2, SPI1_MISO, QUADSPI_BK1_IO2, FMC_D11 and EVENTOUT. |
| 46 | PE15 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_BKIN, TIM1_BKIN_COMP1, SPI1_MOSI, QUADSPI_BK1_IO3, FMC_D12 and EVENTOUT. |
| 47 | PB10 | bidirectional | 5V-tolerant, Fm+ capable I/O with alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK, DFSDM1_DATIN7, USART3_TX, LPUART1_RX, QUADSPI_CLK, COMP1_OUT, SAI1_SCK_A and EVENTOUT. |
| 48 | PB11 | bidirectional | 5V-tolerant, Fm+ capable I/O with alternate functions TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, LPUART1_TX, QUADSPI_NCS, COMP2_OUT and EVENTOUT. |
| 49 | VSS | power_in | Digital ground supply pin. |
| 50 | VDD | power_in | Digital power supply pin, standard operating voltage 1.71 V to 3.6 V. |
| 51 | PB12 | bidirectional | 5V-tolerant I/O with alternate functions TIM1_BKIN, TIM1_BKIN_COMP2, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1, USART3_CK, LPUART1_RTS_DE, TSC_G1_IO1, SWPMI1_IO, SAI2_FS_A, TIM15_BKIN and EVENTOUT. |
| 52 | PB13 | bidirectional | 5V-tolerant, Fm+ capable I/O with alternate functions TIM1_CH1N, I2C2_SCL, SPI2_SCK, DFSDM1_CKIN1, USART3_CTS, LPUART1_CTS, TSC_G1_IO2, SWPMI1_TX, SAI2_SCK_A, TIM15_CH1N and EVENTOUT. |
| 53 | PB14 | bidirectional | 5V-tolerant, Fm+ capable I/O with alternate functions TIM1_CH2N, TIM8_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS_DE, TSC_G1_IO3, SWPMI1_RX, SAI2_MCLK_A, TIM15_CH1 and EVENTOUT. |
| 54 | PB15 | bidirectional | 5V-tolerant I/O with alternate functions RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, DFSDM1_CKIN2, TSC_G1_IO4, SWPMI1_SUSPEND, SAI2_SD_A, TIM15_CH2 and EVENTOUT. |
| 55 | PD8 | bidirectional | 5V-tolerant I/O with alternate functions USART3_TX, FMC_D13 and EVENTOUT. |
| 56 | PD9 | bidirectional | 5V-tolerant I/O with alternate functions USART3_RX, FMC_D14, SAI2_MCLK_A and EVENTOUT. |
| 57 | PD10 | bidirectional | 5V-tolerant I/O with alternate functions USART3_CK, TSC_G6_IO1, FMC_D15, SAI2_SCK_A and EVENTOUT. |
| 58 | PD11 | bidirectional | 5V-tolerant I/O with alternate functions USART3_CTS, TSC_G6_IO2, FMC_A16, SAI2_SD_A, LPTIM2_ETR and EVENTOUT. |
| 59 | PD12 | bidirectional | 5V-tolerant I/O with alternate functions TIM4_CH1, USART3_RTS_DE, TSC_G6_IO3, FMC_A17, SAI2_FS_A, LPTIM2_IN1 and EVENTOUT. |
| 60 | PD13 | bidirectional | 5V-tolerant I/O with alternate functions TIM4_CH2, TSC_G6_IO4, FMC_A18, LPTIM2_OUT and EVENTOUT. |
| 61 | PD14 | bidirectional | 5V-tolerant I/O with alternate functions TIM4_CH3, FMC_D0 and EVENTOUT. |
| 62 | PD15 | bidirectional | 5V-tolerant I/O with alternate functions TIM4_CH4, FMC_D1 and EVENTOUT. |
| 63 | PC6 | bidirectional | 5V-tolerant I/O with alternate functions TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, TSC_G4_IO1, SDMMC1_D6, SAI2_MCLK_A and EVENTOUT. |
| 64 | PC7 | bidirectional | 5V-tolerant I/O with alternate functions TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, TSC_G4_IO2, SDMMC1_D7, SAI2_MCLK_B and EVENTOUT. |
| 65 | PC8 | bidirectional | 5V-tolerant I/O with alternate functions TIM3_CH3, TIM8_CH3, TSC_G4_IO3, SDMMC1_D0 and EVENTOUT. |
| 66 | PC9 | bidirectional | 5V-tolerant I/O with alternate functions TIM8_BKIN2, TIM3_CH4, TIM8_CH4, TSC_G4_IO4, OTG_FS_NOE, SDMMC1_D1, SAI2_EXTCLK, TIM8_BKIN2_COMP1 and EVENTOUT. |
| 67 | PA8 | bidirectional | 5V-tolerant I/O with alternate functions MCO, TIM1_CH1, USART1_CK, OTG_FS_SOF, LPTIM2_OUT and EVENTOUT. |
| 68 | PA9 | bidirectional | 5V-tolerant I/O with USB function supplied by VDDUSB; alternate functions TIM1_CH2, USART1_TX, TIM15_BKIN, EVENTOUT and additional function OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5V-tolerant I/O with USB function supplied by VDDUSB; alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, TIM17_BKIN and EVENTOUT. |
| 70 | PA11 | bidirectional | 5V-tolerant I/O with USB function supplied by VDDUSB; alternate functions TIM1_CH4, TIM1_BKIN2, USART1_CTS, CAN1_RX, OTG_FS_DM, TIM1_BKIN2_COMP1 and EVENTOUT. |
| 71 | PA12 | bidirectional | 5V-tolerant I/O with USB function supplied by VDDUSB; alternate functions TIM1_ETR, USART1_RTS_DE, CAN1_TX, OTG_FS_DP and EVENTOUT. |
| 72 | PA13 | bidirectional | 5V-tolerant I/O; after reset configured as the JTMS-SWDIO debug alternate function (internal pull-up active); also supports IR_OUT, OTG_FS_NOE and EVENTOUT alternate functions. |
| 73 | VDDUSB | power_in | USB transceiver supply pin, 3.0 V to 3.6 V when the USB is used (0 to 3.6 V when USB is not used). |
| 74 | VSS | power_in | Digital ground supply pin. |
| 75 | VDD | power_in | Digital power supply pin, standard operating voltage 1.71 V to 3.6 V. |
| 76 | PA14 | bidirectional | 5V-tolerant I/O; after reset configured as the JTCK-SWCLK debug alternate function (internal pull-down active); also supports EVENTOUT. |
| 77 | PA15 | bidirectional | 5V-tolerant, analog-switch capable I/O; after reset configured as JTDI debug alternate function (internal pull-up active); also supports TIM2_CH1, TIM2_ETR, SPI1_NSS, SPI3_NSS, UART4_RTS_DE, TSC_G3_IO1, SAI2_FS_B and EVENTOUT. |
| 78 | PC10 | bidirectional | 5V-tolerant I/O with alternate functions SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, SDMMC1_D2, SAI2_SCK_B and EVENTOUT. |
| 79 | PC11 | bidirectional | 5V-tolerant I/O with alternate functions SPI3_MISO, USART3_RX, UART4_RX, TSC_G3_IO3, SDMMC1_D3, SAI2_MCLK_B and EVENTOUT. |
| 80 | PC12 | bidirectional | 5V-tolerant I/O with alternate functions SPI3_MOSI, USART3_CK, UART5_TX, TSC_G3_IO4, SDMMC1_CK, SAI2_SD_B and EVENTOUT. |
| 81 | PD0 | bidirectional | 5V-tolerant I/O with alternate functions SPI2_NSS, DFSDM1_DATIN7, CAN1_RX, FMC_D2 and EVENTOUT. |
| 82 | PD1 | bidirectional | 5V-tolerant I/O with alternate functions SPI2_SCK, DFSDM1_CKIN7, CAN1_TX, FMC_D3 and EVENTOUT. |
| 83 | PD2 | bidirectional | 5V-tolerant I/O with alternate functions TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, SDMMC1_CMD and EVENTOUT. |
| 84 | PD3 | bidirectional | 5V-tolerant I/O with alternate functions SPI2_MISO, DFSDM1_DATIN0, USART2_CTS, FMC_CLK and EVENTOUT. |
| 85 | PD4 | bidirectional | 5V-tolerant I/O with alternate functions SPI2_MOSI, DFSDM1_CKIN0, USART2_RTS_DE, FMC_NOE and EVENTOUT. |
| 86 | PD5 | bidirectional | 5V-tolerant I/O with alternate functions USART2_TX, FMC_NWE and EVENTOUT. |
| 87 | PD6 | bidirectional | 5V-tolerant I/O with alternate functions DFSDM1_DATIN1, USART2_RX, FMC_NWAIT, SAI1_SD_A and EVENTOUT. |
| 88 | PD7 | bidirectional | 5V-tolerant I/O with alternate functions DFSDM1_CKIN1, USART2_CK, FMC_NE1 and EVENTOUT. |
| 89 | PB3 | bidirectional | 5V-tolerant, analog-switch capable I/O; after reset configured as JTDO-TRACESWO debug alternate function (internal pull-up active); also supports TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE, SAI1_SCK_B, EVENTOUT and additional function COMP2_INM. |
| 90 | PB4 | bidirectional | 5V-tolerant, analog-switch capable I/O; after reset configured as NJTRST debug alternate function (internal pull-up active); also supports TIM3_CH1, SPI1_MISO, SPI3_MISO, USART1_CTS, UART5_RTS_DE, TSC_G2_IO1, SAI1_MCLK_B, TIM17_BKIN, EVENTOUT and additional function COMP2_INP. |
| 91 | PB5 | bidirectional | 5V-tolerant, analog-switch capable I/O with alternate functions LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, UART5_CTS, TSC_G2_IO2, COMP2_OUT, SAI1_SD_B, TIM16_BKIN and EVENTOUT. |
| 92 | PB6 | bidirectional | 5V-tolerant, Fm+ and analog-switch capable I/O with alternate functions LPTIM1_ETR, TIM4_CH1, TIM8_BKIN2, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, TSC_G2_IO3, TIM8_BKIN2_COMP2, SAI1_FS_B, TIM16_CH1N, EVENTOUT and additional function COMP2_INP. |
| 93 | PB7 | bidirectional | 5V-tolerant, Fm+ and analog-switch capable I/O with alternate functions LPTIM1_IN2, TIM4_CH2, TIM8_BKIN, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, UART4_CTS, TSC_G2_IO4, FMC_NL, TIM8_BKIN_COMP1, TIM17_CH1N, EVENTOUT and additional functions COMP2_INM, PVD_IN. |
| 94 | BOOT0 | input | Dedicated boot-mode selection input pin, input voltage range 0 to 9 V, sampled at reset to select the boot memory location. |
| 95 | PB8 | bidirectional | 5V-tolerant, Fm+ capable I/O with alternate functions TIM4_CH3, I2C1_SCL, DFSDM1_DATIN6, CAN1_RX, SDMMC1_D4, SAI1_MCLK_A, TIM16_CH1 and EVENTOUT. |
| 96 | PB9 | bidirectional | 5V-tolerant, Fm+ capable I/O with alternate functions IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, DFSDM1_CKIN6, CAN1_TX, SDMMC1_D5, SAI1_FS_A, TIM17_CH1 and EVENTOUT. |
| 97 | PE0 | bidirectional | 5V-tolerant I/O with alternate functions TIM4_ETR, FMC_NBL0, TIM16_CH1 and EVENTOUT. |
| 98 | PE1 | bidirectional | 5V-tolerant I/O with alternate functions FMC_NBL1, TIM17_CH1 and EVENTOUT. |
| 99 | VSS | power_in | Digital ground supply pin. |
| 100 | VDD | power_in | Digital power supply pin, standard operating voltage 1.71 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
STM32L475VET6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32l475vet6-etched.step/stm32l475vet6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l475vet6.step/stm32l475vet6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (204 pp, sha256
91a2d0570b5239e6, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).