component
STM32L471RET6TR
Public Made by Adomby adom
STMicroelectronics Microcontroller Units (MCUs/MPUs/SOCs), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
952f3d3
STM32L471RET6TR
STMicroelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
STM32L471RET6TR from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup-domain supply that powers the RTC and 32x32-bit backup registers, with backup operating voltage 1.55 V to 3.6 V; additional function RTC_TAMP3/WKUP3. |
| 2 | PC13 | bidirectional | 5 V-tolerant (FT) I/O supplied through the power switch, which sinks only 3 mA, so output use is limited to 2 MHz with 30 pF maximum load and it must not drive current sources such as LEDs; alternate function EVENTOUT, additional functions RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V-tolerant (FT) I/O supplied through the power switch with the same 3 mA and 2 MHz / 30 pF output limits as PC13, also serving as the LSE oscillator input OSC32_IN. |
| 4 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant (FT) I/O supplied through the power switch with the same 3 mA and 2 MHz / 30 pF output limits as PC13, also serving as the LSE oscillator output OSC32_OUT. |
| 5 | PH0-OSC_IN | bidirectional | 5 V-tolerant (FT) I/O with alternate function EVENTOUT, also serving as the HSE oscillator input OSC_IN. |
| 6 | PH1-OSC_OUT | bidirectional | 5 V-tolerant (FT) I/O with alternate function EVENTOUT, also serving as the HSE oscillator output OSC_OUT. |
| 7 | NRST | bidirectional | Bidirectional reset pin (RST structure) with an embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | 5 V-tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; alternate functions LPTIM1_IN1, I2C3_SCL, DFSDM1_DATIN4, LPUART1_RX, LPTIM2_IN1, EVENTOUT; additional function ADC123_IN1. |
| 9 | PC1 | bidirectional | 5 V-tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; alternate functions LPTIM1_OUT, I2C3_SDA, DFSDM1_CKIN4, LPUART1_TX, EVENTOUT; additional function ADC123_IN2. |
| 10 | PC2 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT, EVENTOUT; additional function ADC123_IN3. |
| 11 | PC3 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions LPTIM1_ETR, SPI2_MOSI, SAI1_SD_A, LPTIM2_ETR, EVENTOUT; additional function ADC123_IN4. |
| 12 | VSSA/VREF- | power_in | Analog ground pin that also serves as the negative reference voltage VREF-, which may be internally connected to VSSA depending on the package. |
| 13 | VDDA/VREF+ | power_in | Analog supply for ADC, DAC, OPAMP and COMP (1.62 V to 3.6 V when the ADC or COMP is used) that also serves as positive reference VREF+, which may be internally connected to VDDA depending on the package. |
| 14 | PA0 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI1_EXTCLK, TIM2_ETR, EVENTOUT; additional functions OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1. |
| 15 | PA1 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS_DE, UART4_RX, TIM15_CH1N, EVENTOUT; additional functions OPAMP1_VINM, ADC12_IN6. |
| 16 | PA2 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH3, TIM5_CH3, USART2_TX, SAI2_EXTCLK, TIM15_CH1, EVENTOUT; additional functions ADC12_IN7, WKUP4/LSCO. |
| 17 | PA3 | bidirectional | 3.6 V-tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH4, TIM5_CH4, USART2_RX, TIM15_CH2, EVENTOUT; additional functions OPAMP1_VOUT, ADC12_IN8. |
| 18 | VSS | power_in | Ground pin for the digital supply domain. |
| 19 | VDD | power_in | Standard digital supply voltage, 1.71 V to 3.6 V. |
| 20 | PA4 | bidirectional | 3.6 V-tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, SAI1_FS_B, LPTIM2_OUT, EVENTOUT; additional functions ADC12_IN9, DAC1_OUT1. |
| 21 | PA5 | bidirectional | 3.6 V-tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK, LPTIM2_ETR, EVENTOUT; additional functions ADC12_IN10, DAC1_OUT2. |
| 22 | PA6 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, USART3_CTS, QUADSPI_BK1_IO3, TIM1_BKIN_COMP2, TIM8_BKIN_COMP2, TIM16_CH1, EVENTOUT; additional functions OPAMP2_VINP, ADC12_IN11. |
| 23 | PA7 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, QUADSPI_BK1_IO2, TIM17_CH1, EVENTOUT; additional functions OPAMP2_VINM, ADC12_IN12. |
| 24 | PC4 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate function USART3_TX, EVENTOUT; additional functions COMP1_INM, ADC12_IN13. |
| 25 | PC5 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate function USART3_RX, EVENTOUT; additional functions COMP1_INP, ADC12_IN14, WKUP5. |
| 26 | PB0 | bidirectional | 3.6 V-tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, USART3_CK, QUADSPI_BK1_IO1, COMP1_OUT, EVENTOUT; additional functions OPAMP2_VOUT, ADC12_IN15. |
| 27 | PB1 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN0, USART3_RTS_DE, QUADSPI_BK1_IO0, LPTIM2_IN1, EVENTOUT; additional functions COMP1_INM, ADC12_IN16. |
| 28 | PB2 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0, EVENTOUT; additional function COMP1_INP. |
| 29 | PB10 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK, DFSDM1_DATIN7, USART3_TX, LPUART1_RX, QUADSPI_CLK, COMP1_OUT, SAI1_SCK_A, EVENTOUT. |
| 30 | PB11 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, LPUART1_TX, QUADSPI_NCS, COMP2_OUT, EVENTOUT. |
| 31 | VSS | power_in | Ground pin for the digital supply domain. |
| 32 | VDD | power_in | Standard digital supply voltage, 1.71 V to 3.6 V. |
| 33 | PB12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_BKIN, TIM1_BKIN_COMP2, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1, USART3_CK, LPUART1_RTS_DE, TSC_G1_IO1, SWPMI1_IO, SAI2_FS_A, TIM15_BKIN, EVENTOUT. |
| 34 | PB13 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM1_CH1N, I2C2_SCL, SPI2_SCK, DFSDM1_CKIN1, USART3_CTS, LPUART1_CTS, TSC_G1_IO2, SWPMI1_TX, SAI2_SCK_A, TIM15_CH1N, EVENTOUT. |
| 35 | PB14 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM1_CH2N, TIM8_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS_DE, TSC_G1_IO3, SWPMI1_RX, SAI2_MCLK_A, TIM15_CH1, EVENTOUT. |
| 36 | PB15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, DFSDM1_CKIN2, TSC_G1_IO4, SWPMI1_SUSPEND, SAI2_SD_A, TIM15_CH2, EVENTOUT; additional function RTC_REFIN. |
| 37 | PC6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, TSC_G4_IO1, SDMMC1_D6, SAI2_MCLK_A, EVENTOUT. |
| 38 | PC7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, TSC_G4_IO2, SDMMC1_D7, SAI2_MCLK_B, EVENTOUT. |
| 39 | PC8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH3, TIM8_CH3, TSC_G4_IO3, SDMMC1_D0, EVENTOUT. |
| 40 | PC9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM8_BKIN2, TIM3_CH4, TIM8_CH4, TSC_G4_IO4, SDMMC1_D1, SAI2_EXTCLK, TIM8_BKIN2_COMP1, EVENTOUT. |
| 41 | PA8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions MCO, TIM1_CH1, USART1_CK, LPTIM2_OUT, EVENTOUT. |
| 42 | PA9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_CH2, USART1_TX, TIM15_BKIN, EVENTOUT. |
| 43 | PA10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_CH3, USART1_RX, TIM17_BKIN, EVENTOUT. |
| 44 | PA11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_CH4, TIM1_BKIN2, USART1_CTS, CAN1_RX, TIM1_BKIN2_COMP1, EVENTOUT. |
| 45 | PA12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_ETR, USART1_RTS_DE, CAN1_TX, EVENTOUT. |
| 46 | PA13 (JTMS-SWDIO) | bidirectional | 5 V-tolerant (FT) I/O that after reset is configured as the JTMS-SWDIO debug function with an internal pull-up enabled; alternate functions JTMS-SWDIO, IR_OUT, EVENTOUT. |
| 47 | VSS | power_in | Ground pin for the digital supply domain. |
| 48 | VDD | power_in | Standard digital supply voltage, 1.71 V to 3.6 V. |
| 49 | PA14 (JTCK-SWCLK) | bidirectional | 5 V-tolerant (FT) I/O that after reset is configured as the JTCK-SWCLK debug function with an internal pull-down enabled; alternate functions JTCK-SWCLK, EVENTOUT. |
| 50 | PA15 (JTDI) | bidirectional | 5 V-tolerant (FT) I/O that after reset is configured as the JTDI debug function with an internal pull-up enabled; alternate functions JTDI, TIM2_CH1, TIM2_ETR, SPI1_NSS, SPI3_NSS, UART4_RTS_DE, TSC_G3_IO1, SAI2_FS_B, EVENTOUT. |
| 51 | PC10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, SDMMC1_D2, SAI2_SCK_B, EVENTOUT. |
| 52 | PC11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI3_MISO, USART3_RX, UART4_RX, TSC_G3_IO3, SDMMC1_D3, SAI2_MCLK_B, EVENTOUT. |
| 53 | PC12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI3_MOSI, USART3_CK, UART5_TX, TSC_G3_IO4, SDMMC1_CK, SAI2_SD_B, EVENTOUT. |
| 54 | PD2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, SDMMC1_CMD, EVENTOUT. |
| 55 | PB3 (JTDO-TRACESWO) | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA that after reset is configured as the JTDO-TRACESWO debug function; alternate functions TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE, SAI1_SCK_B, EVENTOUT; additional function COMP2_INM. |
| 56 | PB4 (NJTRST) | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA that after reset is configured as the NJTRST debug function with an internal pull-up enabled; alternate functions NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, USART1_CTS, UART5_RTS_DE, TSC_G2_IO1, SAI1_MCLK_B, TIM17_BKIN, EVENTOUT; additional function COMP2_INP. |
| 57 | PB5 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, UART5_CTS, TSC_G2_IO2, COMP2_OUT, SAI1_SD_B, TIM16_BKIN, EVENTOUT. |
| 58 | PB6 | bidirectional | 5 V-tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; alternate functions LPTIM1_ETR, TIM4_CH1, TIM8_BKIN2, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, TSC_G2_IO3, TIM8_BKIN2_COMP2, SAI1_FS_B, TIM16_CH1N, EVENTOUT; additional function COMP2_INP. |
| 59 | PB7 | bidirectional | 5 V-tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; alternate functions LPTIM1_IN2, TIM4_CH2, TIM8_BKIN, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, UART4_CTS, TSC_G2_IO4, FMC_NL, TIM8_BKIN_COMP1, TIM17_CH1N, EVENTOUT; additional functions COMP2_INM, PVD_IN. |
| 60 | BOOT0 | input | Dedicated BOOT0 input pin whose input voltage range is 0 to 9 V. |
| 61 | PB8 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM4_CH3, I2C1_SCL, DFSDM1_DATIN6, CAN1_RX, SDMMC1_D4, SAI1_MCLK_A, TIM16_CH1, EVENTOUT. |
| 62 | PB9 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, DFSDM1_CKIN6, CAN1_TX, SDMMC1_D5, SAI1_FS_A, TIM17_CH1, EVENTOUT. |
| 63 | VSS | power_in | Ground pin for the digital supply domain. |
| 64 | VDD | power_in | Standard digital supply voltage, 1.71 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD, VDDA, VDDIO2, VBAT) | VDDX - VSS | -0.3 | 4 | V | 97 | ||
| Input voltage on TT_xx pins | VIN | 4 | V | Input voltage on TT_xx pins | 97 | ||
| Input voltage on BOOT0 pin | VIN | 9 | V | Input voltage on BOOT0 pin | 97 | ||
| Input voltage on any other pins | VIN | 4 | V | Input voltage on any other pins | 97 | ||
| Variation between different VDDX power pins of the same domain | /ΔVDDx/ | 50 | mV | Variations between different VDDX power pins of the same domain | 97 | ||
| Variation between all the different ground pins | /VSSx-VSS/ | 50 | mV | Variations between all the different ground pins | 97 | ||
| Total current into sum of all VDD power lines (source) | ∑IVDD | 150 | mA | 98 | |||
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | 150 | mA | 98 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 98 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 98 | |||
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | 20 | mA | Except FT_f pins | 98 | ||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | FT_f pins | 98 | ||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | Source | 98 | ||
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | Sink | 98 | ||
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | Source | 98 | ||
| Injected current on FT_xxx, TT_xx, RST and B pins, except PA4, PA5 | IINJ(PIN) | -5 | 0 | mA | FT_xxx, TT_xx, RST and B pins, except PA4, PA5 | 98 | |
| Injected current on PA4, PA5 | IINJ(PIN) | -5 | 0 | mA | PA4, PA5 | 98 | |
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | 98 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 98 | ||
| Maximum junction temperature | TJ | 150 | °C | 98 | |||
| Internal AHB clock frequency | fHCLK | 0 | 80 | MHz | 99 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 80 | MHz | 99 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 80 | MHz | 99 | ||
| Standard operating voltage | VDD | 1.71 | 3.6 | V | 99 | ||
| PG[15:2] I/Os supply voltage | VDDIO2 | 1.08 | 3.6 | V | At least one I/O in PG[15:2] used | 99 | |
| PG[15:2] I/Os supply voltage | VDDIO2 | 0 | 3.6 | V | PG[15:2] not used | 99 | |
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 99 | |
| Analog supply voltage | VDDA | 1.8 | V | DAC or OPAMP used | 99 | ||
| Analog supply voltage | VDDA | 2.4 | V | VREFBUF used | 99 | ||
| Analog supply voltage | VDDA | 0 | V | ADC, DAC, OPAMP, COMP, VREFBUF not used | 99 | ||
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 99 | ||
| I/O input voltage on TT_xx I/O | VIN | -0.3 | V | TT_xx I/O; max printed as VDDIOx+0.3 | 99 | ||
| I/O input voltage on BOOT0 | VIN | 0 | 9 | V | BOOT0 | 99 | |
| I/O input voltage on all I/O except BOOT0 and TT_xx | VIN | -0.3 | V | All I/O except BOOT0 and TT_xx; max printed as formula | 99 | ||
| Power dissipation at TA = 85 °C for suffix 6, LQFP64 | PD | 444 | mW | TA = 85 °C for suffix 6 | 99 | ||
| Ambient temperature for suffix 6, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation | 100 | |
| Ambient temperature for suffix 6, low-power dissipation | TA | -40 | 105 | °C | Low-power dissipation | 100 | |
| Junction temperature range, suffix 6 version | TJ | -40 | 105 | °C | Suffix 6 version | 100 | |
| VDD rise time rate | tVDD | 0 | µs/V | VDD rise time rate; max printed as ∞ | 100 | ||
| VDD fall time rate | tVDD | 10 | µs/V | VDD fall time rate; max printed as ∞ | 100 | ||
| VDDA rise time rate | tVDDA | 0 | µs/V | VDDA rise time rate; max printed as ∞ | 100 | ||
| VDDA fall time rate | tVDDA | 10 | µs/V | VDDA fall time rate; max printed as ∞ | 100 | ||
| VDDIO2 rise time rate | tVDDIO2 | 0 | µs/V | VDDIO2 rise time rate; max printed as ∞ | 100 | ||
| VDDIO2 fall time rate | tVDDIO2 | 10 | µs/V | VDDIO2 fall time rate; max printed as ∞ | 100 | ||
| Reset temporization after BOR0 is detected | tRSTTEMPO | 250 | 400 | μs | VDD rising | 101 | |
| Brown-out reset threshold 0, rising edge | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 101 |
| Brown-out reset threshold 0, falling edge | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 101 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 103 |
| Internal reference voltage spread over the temperature range | ∆VREFINT | 5 | 7.5 | mV | VDD = 3 V | 103 | |
| Average temperature coefficient | TCoeff | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 103 | |
| Long term stability | ACoeff | 300 | 1000 | ppm | 1000 hours, T = 25°C | 103 | |
| Average voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 103 | |
| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % | 1/4 reference voltage | 103 |
| 1/2 reference voltage | VREFINT_DIV2 | 49 | 50 | 51 | % | 1/2 reference voltage | 103 |
| 3/4 reference voltage | VREFINT_DIV3 | 74 | 75 | 76 | % | 3/4 reference voltage | 103 |
| Supply current in Run mode, Range 1, 80 MHz, 85 °C | IDD_ALL (Run) | 10.5 | 12.1 | mA | Range 1, fHCLK = 80 MHz, all peripherals disabled, 85 °C | 106 | |
| Supply current in Stop 2 mode, RTC disabled, 3.6 V, 85 °C | IDD_ALL (Stop 2) | 16 | 40 | µA | VDD = 3.6 V, RTC disabled, 85 °C | 112 | |
| Supply current in Stop 1 mode, RTC disabled, 3.6 V, 85 °C | IDD_ALL (Stop 1) | 93.8 | 235 | µA | VDD = 3.6 V, RTC disabled, 85 °C | 113 | |
| Supply current in Standby mode, RTC disabled, no independent watchdog, 3.6 V, 85 °C | IDD_ALL (Standby) | 2608 | 6520 | nA | VDD = 3.6 V, RTC disabled, no independent watchdog, 85 °C | 116 | |
| Supply current in Shutdown mode, RTC disabled, 3.6 V, 85 °C | IDD_ALL (Shutdown) | 2041 | 5103 | nA | VDD = 3.6 V, RTC disabled, 85 °C | 117 |
CAD (KiCad official)
- Symbol:
STM32L471RET6TR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32l471ret6tr-etched.step/stm32l471ret6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l471ret6tr.step/stm32l471ret6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (229 pp, sha256
2a91fd04e0793619, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L471RET6TR
**STMicroelectronics** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
STM32L471RET6TR from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup-domain supply that powers the RTC and 32x32-bit backup registers, with backup operating voltage 1.55 V to 3.6 V; additional function RTC_TAMP3/WKUP3. |
| 2 | PC13 | bidirectional | 5 V-tolerant (FT) I/O supplied through the power switch, which sinks only 3 mA, so output use is limited to 2 MHz with 30 pF maximum load and it must not drive current sources such as LEDs; alternate function EVENTOUT, additional functions RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V-tolerant (FT) I/O supplied through the power switch with the same 3 mA and 2 MHz / 30 pF output limits as PC13, also serving as the LSE oscillator input OSC32_IN. |
| 4 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant (FT) I/O supplied through the power switch with the same 3 mA and 2 MHz / 30 pF output limits as PC13, also serving as the LSE oscillator output OSC32_OUT. |
| 5 | PH0-OSC_IN | bidirectional | 5 V-tolerant (FT) I/O with alternate function EVENTOUT, also serving as the HSE oscillator input OSC_IN. |
| 6 | PH1-OSC_OUT | bidirectional | 5 V-tolerant (FT) I/O with alternate function EVENTOUT, also serving as the HSE oscillator output OSC_OUT. |
| 7 | NRST | bidirectional | Bidirectional reset pin (RST structure) with an embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | 5 V-tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; alternate functions LPTIM1_IN1, I2C3_SCL, DFSDM1_DATIN4, LPUART1_RX, LPTIM2_IN1, EVENTOUT; additional function ADC123_IN1. |
| 9 | PC1 | bidirectional | 5 V-tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; alternate functions LPTIM1_OUT, I2C3_SDA, DFSDM1_CKIN4, LPUART1_TX, EVENTOUT; additional function ADC123_IN2. |
| 10 | PC2 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions LPTIM1_IN2, SPI2_MISO, DFSDM1_CKOUT, EVENTOUT; additional function ADC123_IN3. |
| 11 | PC3 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions LPTIM1_ETR, SPI2_MOSI, SAI1_SD_A, LPTIM2_ETR, EVENTOUT; additional function ADC123_IN4. |
| 12 | VSSA/VREF- | power_in | Analog ground pin that also serves as the negative reference voltage VREF-, which may be internally connected to VSSA depending on the package. |
| 13 | VDDA/VREF+ | power_in | Analog supply for ADC, DAC, OPAMP and COMP (1.62 V to 3.6 V when the ADC or COMP is used) that also serves as positive reference VREF+, which may be internally connected to VDDA depending on the package. |
| 14 | PA0 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH1, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI1_EXTCLK, TIM2_ETR, EVENTOUT; additional functions OPAMP1_VINP, ADC12_IN5, RTC_TAMP2/WKUP1. |
| 15 | PA1 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS_DE, UART4_RX, TIM15_CH1N, EVENTOUT; additional functions OPAMP1_VINM, ADC12_IN6. |
| 16 | PA2 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH3, TIM5_CH3, USART2_TX, SAI2_EXTCLK, TIM15_CH1, EVENTOUT; additional functions ADC12_IN7, WKUP4/LSCO. |
| 17 | PA3 | bidirectional | 3.6 V-tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH4, TIM5_CH4, USART2_RX, TIM15_CH2, EVENTOUT; additional functions OPAMP1_VOUT, ADC12_IN8. |
| 18 | VSS | power_in | Ground pin for the digital supply domain. |
| 19 | VDD | power_in | Standard digital supply voltage, 1.71 V to 3.6 V. |
| 20 | PA4 | bidirectional | 3.6 V-tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions SPI1_NSS, SPI3_NSS, USART2_CK, SAI1_FS_B, LPTIM2_OUT, EVENTOUT; additional functions ADC12_IN9, DAC1_OUT1. |
| 21 | PA5 | bidirectional | 3.6 V-tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM2_CH1, TIM2_ETR, TIM8_CH1N, SPI1_SCK, LPTIM2_ETR, EVENTOUT; additional functions ADC12_IN10, DAC1_OUT2. |
| 22 | PA6 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, USART3_CTS, QUADSPI_BK1_IO3, TIM1_BKIN_COMP2, TIM8_BKIN_COMP2, TIM16_CH1, EVENTOUT; additional functions OPAMP2_VINP, ADC12_IN11. |
| 23 | PA7 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, QUADSPI_BK1_IO2, TIM17_CH1, EVENTOUT; additional functions OPAMP2_VINM, ADC12_IN12. |
| 24 | PC4 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate function USART3_TX, EVENTOUT; additional functions COMP1_INM, ADC12_IN13. |
| 25 | PC5 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate function USART3_RX, EVENTOUT; additional functions COMP1_INP, ADC12_IN14, WKUP5. |
| 26 | PB0 | bidirectional | 3.6 V-tolerant (TT_a) I/O with analog switch supplied by VDDA; alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, USART3_CK, QUADSPI_BK1_IO1, COMP1_OUT, EVENTOUT; additional functions OPAMP2_VOUT, ADC12_IN15. |
| 27 | PB1 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN0, USART3_RTS_DE, QUADSPI_BK1_IO0, LPTIM2_IN1, EVENTOUT; additional functions COMP1_INM, ADC12_IN16. |
| 28 | PB2 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions RTC_OUT, LPTIM1_OUT, I2C3_SMBA, DFSDM1_CKIN0, EVENTOUT; additional function COMP1_INP. |
| 29 | PB10 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK, DFSDM1_DATIN7, USART3_TX, LPUART1_RX, QUADSPI_CLK, COMP1_OUT, SAI1_SCK_A, EVENTOUT. |
| 30 | PB11 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, LPUART1_TX, QUADSPI_NCS, COMP2_OUT, EVENTOUT. |
| 31 | VSS | power_in | Ground pin for the digital supply domain. |
| 32 | VDD | power_in | Standard digital supply voltage, 1.71 V to 3.6 V. |
| 33 | PB12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_BKIN, TIM1_BKIN_COMP2, I2C2_SMBA, SPI2_NSS, DFSDM1_DATIN1, USART3_CK, LPUART1_RTS_DE, TSC_G1_IO1, SWPMI1_IO, SAI2_FS_A, TIM15_BKIN, EVENTOUT. |
| 34 | PB13 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM1_CH1N, I2C2_SCL, SPI2_SCK, DFSDM1_CKIN1, USART3_CTS, LPUART1_CTS, TSC_G1_IO2, SWPMI1_TX, SAI2_SCK_A, TIM15_CH1N, EVENTOUT. |
| 35 | PB14 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM1_CH2N, TIM8_CH2N, I2C2_SDA, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS_DE, TSC_G1_IO3, SWPMI1_RX, SAI2_MCLK_A, TIM15_CH1, EVENTOUT. |
| 36 | PB15 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_CH3N, TIM8_CH3N, SPI2_MOSI, DFSDM1_CKIN2, TSC_G1_IO4, SWPMI1_SUSPEND, SAI2_SD_A, TIM15_CH2, EVENTOUT; additional function RTC_REFIN. |
| 37 | PC6 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH1, TIM8_CH1, DFSDM1_CKIN3, TSC_G4_IO1, SDMMC1_D6, SAI2_MCLK_A, EVENTOUT. |
| 38 | PC7 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH2, TIM8_CH2, DFSDM1_DATIN3, TSC_G4_IO2, SDMMC1_D7, SAI2_MCLK_B, EVENTOUT. |
| 39 | PC8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_CH3, TIM8_CH3, TSC_G4_IO3, SDMMC1_D0, EVENTOUT. |
| 40 | PC9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM8_BKIN2, TIM3_CH4, TIM8_CH4, TSC_G4_IO4, SDMMC1_D1, SAI2_EXTCLK, TIM8_BKIN2_COMP1, EVENTOUT. |
| 41 | PA8 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions MCO, TIM1_CH1, USART1_CK, LPTIM2_OUT, EVENTOUT. |
| 42 | PA9 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_CH2, USART1_TX, TIM15_BKIN, EVENTOUT. |
| 43 | PA10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_CH3, USART1_RX, TIM17_BKIN, EVENTOUT. |
| 44 | PA11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_CH4, TIM1_BKIN2, USART1_CTS, CAN1_RX, TIM1_BKIN2_COMP1, EVENTOUT. |
| 45 | PA12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM1_ETR, USART1_RTS_DE, CAN1_TX, EVENTOUT. |
| 46 | PA13 (JTMS-SWDIO) | bidirectional | 5 V-tolerant (FT) I/O that after reset is configured as the JTMS-SWDIO debug function with an internal pull-up enabled; alternate functions JTMS-SWDIO, IR_OUT, EVENTOUT. |
| 47 | VSS | power_in | Ground pin for the digital supply domain. |
| 48 | VDD | power_in | Standard digital supply voltage, 1.71 V to 3.6 V. |
| 49 | PA14 (JTCK-SWCLK) | bidirectional | 5 V-tolerant (FT) I/O that after reset is configured as the JTCK-SWCLK debug function with an internal pull-down enabled; alternate functions JTCK-SWCLK, EVENTOUT. |
| 50 | PA15 (JTDI) | bidirectional | 5 V-tolerant (FT) I/O that after reset is configured as the JTDI debug function with an internal pull-up enabled; alternate functions JTDI, TIM2_CH1, TIM2_ETR, SPI1_NSS, SPI3_NSS, UART4_RTS_DE, TSC_G3_IO1, SAI2_FS_B, EVENTOUT. |
| 51 | PC10 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI3_SCK, USART3_TX, UART4_TX, TSC_G3_IO2, SDMMC1_D2, SAI2_SCK_B, EVENTOUT. |
| 52 | PC11 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI3_MISO, USART3_RX, UART4_RX, TSC_G3_IO3, SDMMC1_D3, SAI2_MCLK_B, EVENTOUT. |
| 53 | PC12 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions SPI3_MOSI, USART3_CK, UART5_TX, TSC_G3_IO4, SDMMC1_CK, SAI2_SD_B, EVENTOUT. |
| 54 | PD2 | bidirectional | 5 V-tolerant (FT) I/O; alternate functions TIM3_ETR, USART3_RTS_DE, UART5_RX, TSC_SYNC, SDMMC1_CMD, EVENTOUT. |
| 55 | PB3 (JTDO-TRACESWO) | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA that after reset is configured as the JTDO-TRACESWO debug function; alternate functions TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE, SAI1_SCK_B, EVENTOUT; additional function COMP2_INM. |
| 56 | PB4 (NJTRST) | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA that after reset is configured as the NJTRST debug function with an internal pull-up enabled; alternate functions NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, USART1_CTS, UART5_RTS_DE, TSC_G2_IO1, SAI1_MCLK_B, TIM17_BKIN, EVENTOUT; additional function COMP2_INP. |
| 57 | PB5 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch supplied by VDDA; alternate functions LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, UART5_CTS, TSC_G2_IO2, COMP2_OUT, SAI1_SD_B, TIM16_BKIN, EVENTOUT. |
| 58 | PB6 | bidirectional | 5 V-tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; alternate functions LPTIM1_ETR, TIM4_CH1, TIM8_BKIN2, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, TSC_G2_IO3, TIM8_BKIN2_COMP2, SAI1_FS_B, TIM16_CH1N, EVENTOUT; additional function COMP2_INP. |
| 59 | PB7 | bidirectional | 5 V-tolerant (FT_fa) I/O that is Fm+ capable and has an analog switch supplied by VDDA; alternate functions LPTIM1_IN2, TIM4_CH2, TIM8_BKIN, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, UART4_CTS, TSC_G2_IO4, FMC_NL, TIM8_BKIN_COMP1, TIM17_CH1N, EVENTOUT; additional functions COMP2_INM, PVD_IN. |
| 60 | BOOT0 | input | Dedicated BOOT0 input pin whose input voltage range is 0 to 9 V. |
| 61 | PB8 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions TIM4_CH3, I2C1_SCL, DFSDM1_DATIN6, CAN1_RX, SDMMC1_D4, SAI1_MCLK_A, TIM16_CH1, EVENTOUT. |
| 62 | PB9 | bidirectional | 5 V-tolerant (FT_f) I/O that is Fm+ capable; alternate functions IR_OUT, TIM4_CH4, I2C1_SDA, SPI2_NSS, DFSDM1_CKIN6, CAN1_TX, SDMMC1_D5, SAI1_FS_A, TIM17_CH1, EVENTOUT. |
| 63 | VSS | power_in | Ground pin for the digital supply domain. |
| 64 | VDD | power_in | Standard digital supply voltage, 1.71 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD, VDDA, VDDIO2, VBAT) | VDDX - VSS | -0.3 | | 4 | V | | 97 |
| Input voltage on TT_xx pins | VIN | | | 4 | V | Input voltage on TT_xx pins | 97 |
| Input voltage on BOOT0 pin | VIN | | | 9 | V | Input voltage on BOOT0 pin | 97 |
| Input voltage on any other pins | VIN | | | 4 | V | Input voltage on any other pins | 97 |
| Variation between different VDDX power pins of the same domain | /ΔVDDx/ | | | 50 | mV | Variations between different VDDX power pins of the same domain | 97 |
| Variation between all the different ground pins | /VSSx-VSS/ | | | 50 | mV | Variations between all the different ground pins | 97 |
| Total current into sum of all VDD power lines (source) | ∑IVDD | | | 150 | mA | | 98 |
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | | | 150 | mA | | 98 |
| Maximum current into each VDD power pin (source) | IVDD(PIN) | | | 100 | mA | | 98 |
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | | | 100 | mA | | 98 |
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | | | 20 | mA | Except FT_f pins | 98 |
| Output current sunk by any FT_f pin | IIO(PIN) | | | 20 | mA | FT_f pins | 98 |
| Output current sourced by any I/O and control pin | IIO(PIN) | | | 20 | mA | Source | 98 |
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | | | 100 | mA | Sink | 98 |
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | | | 100 | mA | Source | 98 |
| Injected current on FT_xxx, TT_xx, RST and B pins, except PA4, PA5 | IINJ(PIN) | -5 | | 0 | mA | FT_xxx, TT_xx, RST and B pins, except PA4, PA5 | 98 |
| Injected current on PA4, PA5 | IINJ(PIN) | -5 | | 0 | mA | PA4, PA5 | 98 |
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | | | 25 | mA | | 98 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 98 |
| Maximum junction temperature | TJ | | | 150 | °C | | 98 |
| Internal AHB clock frequency | fHCLK | 0 | | 80 | MHz | | 99 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 80 | MHz | | 99 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 80 | MHz | | 99 |
| Standard operating voltage | VDD | 1.71 | | 3.6 | V | | 99 |
| PG[15:2] I/Os supply voltage | VDDIO2 | 1.08 | | 3.6 | V | At least one I/O in PG[15:2] used | 99 |
| PG[15:2] I/Os supply voltage | VDDIO2 | 0 | | 3.6 | V | PG[15:2] not used | 99 |
| Analog supply voltage | VDDA | 1.62 | | 3.6 | V | ADC or COMP used | 99 |
| Analog supply voltage | VDDA | 1.8 | | | V | DAC or OPAMP used | 99 |
| Analog supply voltage | VDDA | 2.4 | | | V | VREFBUF used | 99 |
| Analog supply voltage | VDDA | 0 | | | V | ADC, DAC, OPAMP, COMP, VREFBUF not used | 99 |
| Backup operating voltage | VBAT | 1.55 | | 3.6 | V | | 99 |
| I/O input voltage on TT_xx I/O | VIN | -0.3 | | | V | TT_xx I/O; max printed as VDDIOx+0.3 | 99 |
| I/O input voltage on BOOT0 | VIN | 0 | | 9 | V | BOOT0 | 99 |
| I/O input voltage on all I/O except BOOT0 and TT_xx | VIN | -0.3 | | | V | All I/O except BOOT0 and TT_xx; max printed as formula | 99 |
| Power dissipation at TA = 85 °C for suffix 6, LQFP64 | PD | | | 444 | mW | TA = 85 °C for suffix 6 | 99 |
| Ambient temperature for suffix 6, maximum power dissipation | TA | -40 | | 85 | °C | Maximum power dissipation | 100 |
| Ambient temperature for suffix 6, low-power dissipation | TA | -40 | | 105 | °C | Low-power dissipation | 100 |
| Junction temperature range, suffix 6 version | TJ | -40 | | 105 | °C | Suffix 6 version | 100 |
| VDD rise time rate | tVDD | 0 | | | µs/V | VDD rise time rate; max printed as ∞ | 100 |
| VDD fall time rate | tVDD | 10 | | | µs/V | VDD fall time rate; max printed as ∞ | 100 |
| VDDA rise time rate | tVDDA | 0 | | | µs/V | VDDA rise time rate; max printed as ∞ | 100 |
| VDDA fall time rate | tVDDA | 10 | | | µs/V | VDDA fall time rate; max printed as ∞ | 100 |
| VDDIO2 rise time rate | tVDDIO2 | 0 | | | µs/V | VDDIO2 rise time rate; max printed as ∞ | 100 |
| VDDIO2 fall time rate | tVDDIO2 | 10 | | | µs/V | VDDIO2 fall time rate; max printed as ∞ | 100 |
| Reset temporization after BOR0 is detected | tRSTTEMPO | | 250 | 400 | μs | VDD rising | 101 |
| Brown-out reset threshold 0, rising edge | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 101 |
| Brown-out reset threshold 0, falling edge | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 101 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 103 |
| Internal reference voltage spread over the temperature range | ∆VREFINT | | 5 | 7.5 | mV | VDD = 3 V | 103 |
| Average temperature coefficient | TCoeff | | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 103 |
| Long term stability | ACoeff | | 300 | 1000 | ppm | 1000 hours, T = 25°C | 103 |
| Average voltage coefficient | VDDCoeff | | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 103 |
| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % | 1/4 reference voltage | 103 |
| 1/2 reference voltage | VREFINT_DIV2 | 49 | 50 | 51 | % | 1/2 reference voltage | 103 |
| 3/4 reference voltage | VREFINT_DIV3 | 74 | 75 | 76 | % | 3/4 reference voltage | 103 |
| Supply current in Run mode, Range 1, 80 MHz, 85 °C | IDD_ALL (Run) | | 10.5 | 12.1 | mA | Range 1, fHCLK = 80 MHz, all peripherals disabled, 85 °C | 106 |
| Supply current in Stop 2 mode, RTC disabled, 3.6 V, 85 °C | IDD_ALL (Stop 2) | | 16 | 40 | µA | VDD = 3.6 V, RTC disabled, 85 °C | 112 |
| Supply current in Stop 1 mode, RTC disabled, 3.6 V, 85 °C | IDD_ALL (Stop 1) | | 93.8 | 235 | µA | VDD = 3.6 V, RTC disabled, 85 °C | 113 |
| Supply current in Standby mode, RTC disabled, no independent watchdog, 3.6 V, 85 °C | IDD_ALL (Standby) | | 2608 | 6520 | nA | VDD = 3.6 V, RTC disabled, no independent watchdog, 85 °C | 116 |
| Supply current in Shutdown mode, RTC disabled, 3.6 V, 85 °C | IDD_ALL (Shutdown) | | 2041 | 5103 | nA | VDD = 3.6 V, RTC disabled, 85 °C | 117 |
## CAD (KiCad official)
- Symbol: `STM32L471RET6TR`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `stm32l471ret6tr-etched.step` / `stm32l471ret6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l471ret6tr.step` / `stm32l471ret6tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32l471qe.pdf) (229 pp, sha256 `2a91fd04e0793619`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l471ret6tr-datasheet.pdf)