main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32l432kcu6: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
stm32l432kcu6-etched.glb Publish 0.1.0 · Ray
stm32l432kcu6-etched.step stm32l432kcu6: factory component page (tier=mfr) · Ray
stm32l432kcu6-hero.glb stm32l432kcu6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32l432kcu6-hero.overlay.json Publish 0.1.0 · Ray
stm32l432kcu6.glb Publish 0.1.0 · Ray
stm32l432kcu6.kicad_mod Publish 0.1.0 · Ray
stm32l432kcu6.kicad_sym Publish 0.1.0 · Ray
stm32l432kcu6.lbr Publish 0.1.0 · Ray
stm32l432kcu6.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

STM32L432KCU6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)

STM32L432KCU6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Main supply pin of the MCU, to be connected to the 1.71 V to 3.6 V external supply (Table 21 gives the standard operating voltage range).
2 PC14-OSC32_IN bidirectional GPIO FT I/O supplied through the power switch, which sinks only 3 mA, so output speed must not exceed 2 MHz at 30 pF and it must not source current such as driving an LED; also serves as the OSC32_IN LSE input.
3 PC15-OSC32_OUT bidirectional GPIO FT I/O supplied through the power switch, which sinks only 3 mA, so output speed must not exceed 2 MHz at 30 pF and it must not source current such as driving an LED; also serves as the OSC32_OUT LSE output.
4 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
5 VDDA/VREF+ power_in Analog supply pin and positive reference voltage input for the ADC, DAC, comparators and operational amplifier.
6 PA0/CK_IN bidirectional FT_a I/O, 5 V tolerant; alternate functions include TIM2_CH1, USART2_CTS and SAI1_EXTCLK, with additional functions OPAMP1_VINP, ADC1_IN5 and WKUP1.
7 PA1 bidirectional FT_a I/O, 5 V tolerant; alternate functions include TIM2_CH2, I2C1_SMBA and SPI1_SCK, with additional functions OPAMP1_VINM, COMP1_INP and ADC1_IN6.
8 PA2 bidirectional FT_a I/O, 5 V tolerant; alternate functions include TIM2_CH3, USART2_TX and LPUART1_TX, with additional functions COMP2_INM, ADC1_IN7 and WKUP4.
9 PA3 bidirectional TT_a I/O, 3.6 V tolerant; alternate functions include TIM2_CH4, USART2_RX and LPUART1_RX, with additional functions OPAMP1_VOUT, COMP2_INP and ADC1_IN8.
10 PA4 bidirectional TT_a I/O, 3.6 V tolerant; alternate functions include SPI1_NSS, SPI3_NSS and USART2_CK, with additional functions COMP1_INM, COMP2_INM, ADC1_IN9 and DAC1_OUT1.
11 PA5 bidirectional TT_a I/O, 3.6 V tolerant; alternate functions include TIM2_CH1, TIM2_ETR and SPI1_SCK, with additional functions COMP1_INM, COMP2_INM, ADC1_IN10 and DAC1_OUT2.
12 PA6 bidirectional FT_a I/O, 5 V tolerant; alternate functions include TIM1_BKIN, SPI1_MISO and USART3_CTS, with additional function ADC1_IN11.
13 PA7 bidirectional FT_fa I/O, 5 V tolerant and Fm+ capable; alternate functions include TIM1_CH1N, I2C3_SCL and SPI1_MOSI, with additional function ADC1_IN12.
14 PB0 bidirectional FT_a I/O, 5 V tolerant; alternate functions include TIM1_CH2N, SPI1_NSS and USART3_CK, with additional function ADC1_IN15.
15 PB1 bidirectional FT_a I/O, 5 V tolerant; alternate functions include TIM1_CH3N, USART3_RTS_DE and LPUART1_RTS_DE, with additional functions COMP1_INM and ADC1_IN16.
16 VSS power_in Ground pin, to be connected to the external ground.
17 VDD power_in Main supply pin of the MCU, to be connected to the external supply within the permitted range.
18 PA8 bidirectional FT I/O, 5 V tolerant; alternate functions include MCO, TIM1_CH1, USART1_CK and SAI1_SCK_A.
19 PA9 bidirectional FT_f I/O, 5 V tolerant and Fm+ capable; alternate functions include TIM1_CH2, I2C1_SCL and USART1_TX.
20 PA10 bidirectional FT_f I/O, 5 V tolerant and Fm+ capable; alternate functions include TIM1_CH3, I2C1_SDA, USART1_RX and USB_CRS_SYNC.
21 PA11 bidirectional FT_u I/O, 5 V tolerant, with USB function supplied by VDDUSB; alternate functions include TIM1_CH4, SPI1_MISO, CAN1_RX and USB_DM.
22 PA12 bidirectional FT_u I/O, 5 V tolerant, with USB function supplied by VDDUSB; alternate functions include TIM1_ETR, SPI1_MOSI, CAN1_TX and USB_DP.
23 PA13 bidirectional FT I/O, 5 V tolerant; after reset configured as JTMS-SWDIO debug function with internal pull-up activated.
24 PA14 bidirectional FT I/O, 5 V tolerant; after reset configured as JTCK-SWCLK debug function with internal pull-down activated.
25 PA15 bidirectional FT I/O, 5 V tolerant; after reset configured as JTDI debug function with internal pull-up activated.
26 PB3 bidirectional FT_a I/O, 5 V tolerant; after reset configured as JTDO-TRACESWO debug function; alternate functions include TIM2_CH2, SPI1_SCK and SAI1_SCK_B.
27 PB4 bidirectional FT_fa I/O, 5 V tolerant and Fm+ capable; after reset configured as NJTRST debug function with internal pull-up activated; additional function COMP2_INP.
28 PB5 bidirectional FT I/O, 5 V tolerant; alternate functions include LPTIM1_IN1, I2C1_SMBA, SPI1_MOSI and COMP2_OUT.
29 PB6 bidirectional FT_fa I/O, 5 V tolerant and Fm+ capable; alternate functions include LPTIM1_ETR, I2C1_SCL and USART1_TX, with additional function COMP2_INP.
30 PB7 bidirectional FT_fa I/O, 5 V tolerant and Fm+ capable; alternate functions include LPTIM1_IN2, I2C1_SDA and USART1_RX, with additional functions COMP2_INM and PVD_IN.
31 PH3/BOOT0 bidirectional FT I/O, 5 V tolerant; also serves as the BOOT0 boot configuration input.
32 VSS power_in Ground pin, to be connected to the external ground.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage ratings VDDX - VSS VDDX - VSS -0.3 4 V 65
Total current into sum of VDD power lines ∑IVDD 140 mA Source current 66
Maximum current into each VDD power pin IVDD(PIN) 100 mA Source current 66
Maximum current out of each VSS ground pin IVSS(PIN) 100 mA Sink current 66
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 20 mA 66
Injected current on FT, TT, RST and B pins IINJ(PIN) -5 0 mA Except PA4, PA5 66
Total injected current, sum of all I/Os and control pins ∑/IINJ(PIN)/ 25 mA 66
Storage temperature range TSTG -65 150 °C 66
Maximum junction temperature TJ 150 °C 66
Internal AHB clock frequency fHCLK 0 80 MHz 67
Standard operating voltage VDD 1.71 3.6 V 67
Analog supply voltage, ADC or COMP used VDDA 1.62 3.6 V ADC or COMP used 67
Analog supply voltage, DAC or OPAMP used VDDA 1.8 3.6 V DAC or OPAMP used 67
USB supply voltage VDDUSB 3 3.6 V USB used 67
Ambient temperature, suffix 6 version, maximum power dissipation TA -40 85 °C Maximum power dissipation 67
Ambient temperature, suffix 6 version, low-power dissipation TA -40 105 °C Low-power dissipation 67
Power dissipation, suffix 6 PD 523 mW TA = 85 °C for suffix 6 67
Junction temperature range, suffix 6 version TJ -40 105 °C Suffix 6 version 67
Brown-out reset threshold 0, rising edge VBOR0 1.62 1.66 1.7 V Rising edge 68
Brown-out reset threshold 0, falling edge VBOR0 1.6 1.64 1.69 V Falling edge 68
Reset temporization after BOR0 is detected tRSTTEMPO 250 400 µs VDD rising 68
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +130 °C 70
Temperature coefficient TCoeff 30 50 ppm/°C -40°C < TA < +130°C 70
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 70
Long term stability ACoeff 300 1000 ppm 1000 hours, T = 25°C 70
Supply current in Run mode, Range 1, 80 MHz IDD_ALL (Run) 8.53 9.5 mA Range 1, fHCLK 80 MHz, all peripherals disabled, 25 °C 73
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2) 1.06 2.1 µA VDD 3 V, 25 °C 79
Supply current in Stop 1 mode, RTC disabled IDD_ALL (Stop 1) 4.41 9.5 µA VDD 3 V, 25 °C 81
Supply current in Stop 0 mode, RTC disabled IDD_ALL (Stop 0) 111 139 µA VDD 3 V, 25 °C 82
Supply current in Standby mode, RTC disabled IDD_ALL (Standby) 90.2 225 nA No independent watchdog, VDD 3 V, 25 °C 83
Supply current in Shutdown mode, RTC disabled IDD_ALL (Shutdown) 44.3 70.1 nA VDD 3 V, 25 °C 84
High-speed external user clock frequency, Range 1 fHSE_ext 8 48 MHz Voltage scaling Range 1 92
High-speed external user clock frequency, Range 2 fHSE_ext 8 26 MHz Voltage scaling Range 2 92
CK_IN high or low time, Range 1 tw(HSEH) tw(HSEL) 7 ns Voltage scaling Range 1 92
CK_IN high or low time, Range 2 tw(HSEH) tw(HSEL) 18 ns Voltage scaling Range 2 92
Low-speed external user clock frequency fLSE_ext 32.768 1000 kHz 93
OSC32_IN high or low time tw(LSEH) tw(LSEL) 250 ns 93
HSI16 frequency fHSI16 15.88 16.08 MHz VDD=3.0 V, TA=30 °C 95
HSI16 user trimming step, code not multiple of 64 TRIM 0.2 0.3 0.4 % Trimming code is not a multiple of 64 95
HSI16 frequency drift over temperature, TA 0 to 85 °C ∆Temp(HSI16) -1 1 % TA = 0 to 85 °C 95
HSI16 frequency drift over temperature, TA -40 to 125 °C ∆Temp(HSI16) -2 1.5 % TA = -40 to 125 °C 95
HSI16 frequency drift over VDD ∆VDD(HSI16) -0.1 0.05 % VDD=1.62 V to 3.6 V 95
MSI frequency after factory calibration, Range 11 fMSI 47.38 48 48.62 MHz MSI mode, VDD=3 V, TA=30 °C 97
MSI oscillator frequency drift over temperature, TA 0 to 85 °C ∆TEMP(MSI) -3.5 3 % MSI mode, TA = -0 to 85 °C 97
MSI oscillator frequency drift over temperature, TA -40 to 125 °C ∆TEMP(MSI) -8 6 % MSI mode, TA = -40 to 125 °C 97
HSI48 accuracy over temperature, VDD 3.0 to 3.6 V ACCHSI48_REL -3 3 % VDD = 3.0 V to 3.6 V, TA = -15 to 85 °C 100
HSI48 accuracy over temperature, VDD 1.65 to 3.6 V ACCHSI48_REL -4.5 4.5 % VDD = 1.65 V to 3.6 V, TA = -40 to 125 °C 100
LSI frequency at 3.0 V, 30 °C fLSI 31.04 32.96 kHz VDD = 3.0 V, TA = 30 °C 101
LSI frequency over supply and temperature fLSI 29.5 34 kHz VDD = 1.62 to 3.6 V, TA = -40 to 125 °C 101

CAD (KiCad official)

  • Symbol: STM32L432KCU6
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: stm32l432kcu6-etched.step / stm32l432kcu6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l432kcu6.step / stm32l432kcu6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (156 pp, sha256 411517499bfbb10c, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF