main
History Download
Ray Publish 0.1.0 d581ff9

STM32L412KBU3

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)

STM32L412KBU3 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Standard operating supply pin, 1.71 V to 3.6 V per the general operating conditions.
2 PC14-OSC32_IN bidirectional FT I/O (5 V tolerant) that doubles as OSC32_IN for the 32 kHz LSE crystal, with EVENTOUT as an alternate function.
3 PC15-OSC32_OUT bidirectional FT I/O (5 V tolerant) that doubles as OSC32_OUT for the 32 kHz LSE crystal, with EVENTOUT as an alternate function.
4 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
5 VDDA/VREF+ power_in Analog supply pin that also serves as the VREF+ input; VDDA is 1.62 V to 3.6 V when the ADC or COMP is used.
6 PA0-CK_IN bidirectional FT_a I/O (5 V tolerant) with OPAMP1_VINP, COMP1_INM and ADC1_IN5 analog functions, and TIM2_CH1, USART2_CTS, COMP1_OUT, TIM2_ETR and CK_IN digital functions.
7 PA1 bidirectional FT_a I/O (5 V tolerant) with OPAMP1_VINM, COMP1_INP and ADC1_IN6 analog functions, and TIM2_CH2, I2C1_SMBA, SPI1_SCK, USART2_RTS_DE and TIM15_CH1N digital functions.
8 PA2 bidirectional FT_a I/O (5 V tolerant) with ADC12_IN7 and WKUP4/LSCO functions, and TIM2_CH3, USART2_TX, LPUART1_TX, QUADSPI_BK1_NCS and TIM15_CH1 digital functions.
9 PA3 bidirectional TT_a I/O (3.6 V tolerant) with OPAMP1_VOUT and ADC12_IN8 analog functions, and TIM2_CH4, USART2_RX, LPUART1_RX, QUADSPI_CLK and TIM15_CH2 digital functions.
10 PA4 bidirectional TT_a I/O (3.6 V tolerant) with COMP1_INM and ADC12_IN9 analog functions, and SPI1_NSS, USART2_CK and LPTIM2_OUT digital functions.
11 PA5 bidirectional TT_a I/O (3.6 V tolerant) with COMP1_INM and ADC12_IN10 analog functions, and TIM2_CH1, TIM2_ETR, SPI1_SCK and LPTIM2_ETR digital functions.
12 PA6 bidirectional FT_a I/O (5 V tolerant) with ADC12_IN11 analog function, and TIM1_BKIN, SPI1_MISO, COMP1_OUT, USART3_CTS, LPUART1_CTS, QUADSPI_BK1_IO3 and TIM16_CH1 digital functions.
13 PA7 bidirectional FT_fa I/O (5 V tolerant, Fm+ capable) with ADC12_IN12 analog function, and TIM1_CH1N, I2C3_SCL, SPI1_MOSI and QUADSPI_BK1_IO2 digital functions.
14 PB0 bidirectional FT_a I/O (5 V tolerant) with ADC12_IN15 analog function, and TRACED0, TIM1_CH2N, SPI1_NSS, USART3_CK, QUADSPI_BK1_IO1 and COMP1_OUT digital functions.
15 PB1 bidirectional FT_a I/O (5 V tolerant) with COMP1_INM and ADC12_IN16 analog functions, and TRACED1, TIM1_CH3N, USART3_RTS_DE, LPUART1_RTS_DE, QUADSPI_BK1_IO0 and LPTIM2_IN1 digital functions.
16 VSS power_in Ground pin for the digital supply domain.
17 VDD power_in Standard operating supply pin, 1.71 V to 3.6 V per the general operating conditions.
18 PA8 bidirectional FT I/O (5 V tolerant) with MCO, TIM1_CH1, USART1_CK, LPTIM2_OUT and EVENTOUT alternate functions.
19 PA9 bidirectional FT_f I/O (5 V tolerant, Fm+ capable) with TIM1_CH2, I2C1_SCL, USART1_TX, TIM15_BKIN and EVENTOUT alternate functions.
20 PA10 bidirectional FT_f I/O (5 V tolerant, Fm+ capable) with TIM1_CH3, I2C1_SDA, USART1_RX, USB_CRS_SYNC and EVENTOUT alternate functions.
21 PA11 bidirectional FT_u I/O (5 V tolerant) with USB function supplied by VDDUSB, and TIM1_CH4, TIM1_BKIN2, SPI1_MISO, COMP1_OUT, USART1_CTS and USB_DM digital functions.
22 PA12 bidirectional FT_u I/O (5 V tolerant) with USB function supplied by VDDUSB, and TIM1_ETR, SPI1_MOSI, USART1_RTS_DE and USB_DP digital functions.
23 PA13 bidirectional FT I/O (5 V tolerant) that carries the JTMS/SWDIO debug function, with IR_OUT, USB_NOE and EVENTOUT alternate functions.
24 PA14 bidirectional FT I/O (5 V tolerant) that carries the JTCK/SWCLK debug function, with LPTIM1_OUT, I2C1_SMBA and EVENTOUT alternate functions.
25 PA15 bidirectional FT I/O (5 V tolerant) that carries the JTDI debug function, with TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS, USART3_RTS_DE, TSC_G3_IO1 and EVENTOUT alternate functions.
26 PB3 bidirectional FT_a I/O (5 V tolerant) that carries the JTDO/TRACESWO function, with TIM2_CH2, SPI1_SCK, USART1_RTS_DE and EVENTOUT alternate functions.
27 PB4 bidirectional FT_fa I/O (5 V tolerant, Fm+ capable) that carries the NJTRST function, with I2C3_SDA, SPI1_MISO, USART1_CTS, TSC_G2_IO1 and EVENTOUT alternate functions.
28 PB5 bidirectional FT I/O (5 V tolerant) with TRACED2, LPTIM1_IN1, I2C1_SMBA, SPI1_MOSI, USART1_CK, TSC_G2_IO2, TIM16_BKIN and EVENTOUT alternate functions.
29 PB6 bidirectional FT_fa I/O (5 V tolerant, Fm+ capable) with TRACED3, LPTIM1_ETR, I2C1_SCL, USART1_TX, TSC_G2_IO3, TIM16_CH1N and EVENTOUT alternate functions.
30 PB7 bidirectional FT_fa I/O (5 V tolerant, Fm+ capable) with PVD_IN additional function, and TRACECK, LPTIM1_IN2, I2C1_SDA, USART1_RX, TSC_G2_IO4 and EVENTOUT alternate functions.
31 PH3-BOOT0 bidirectional FT I/O (5 V tolerant) that carries the BOOT0 boot-configuration function, with EVENTOUT as an alternate function.
32 VSS power_in Ground pin for the digital supply domain.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD VDD 1.71 3.6 V 78
Analog supply VDDA VDDA 1.62 V ADC or COMP used 78
Analog supply VDDA VDDA 1.8 3.6 V OPAMP used 78
Standard operating voltage VDD12 (external SMPS) VDD12 1.08 1.32 V Full frequency range 78
Standard operating voltage VDD12 (external SMPS) VDD12 1 1.32 V Up to 26 MHz 78
Backup operating voltage VBAT VBAT 1.55 3.6 V 78
USB supply voltage VDDUSB VDDUSB 3 3.6 V USB used 78
Internal AHB clock frequency fHCLK fHCLK 0 80 MHz 78
Ambient temperature TA (suffix 6, maximum power dissipation) TA -40 85 °C Suffix 6 version, maximum power dissipation 79
Ambient temperature TA (suffix 6, low-power dissipation) TA -40 105 °C Suffix 6 version, low-power dissipation 79
Ambient temperature TA (suffix 3, maximum power dissipation) TA -40 125 °C Suffix 3 version, maximum power dissipation 79
Ambient temperature TA (suffix 3, low-power dissipation) TA -40 130 °C Suffix 3 version, low-power dissipation 79
Junction temperature range TJ TJ -40 105 °C Suffix 6 version 79
Junction temperature range TJ TJ -40 130 °C Suffix 3 version 79
Power dissipation PD, UFQFPN32 PD 541 mW TA = 85 °C for suffix 6 78
Power dissipation PD, UFQFPN32 PD 135 mW TA = 125 °C for suffix 3 78
External main supply voltage (VDD, VDDA, VDDUSB, VBAT) VDDX - VSS -0.3 4 V 75
External SMPS supply voltage VDD12 - VSS -0.3 1.32 V 75
Input voltage on TT_xx pins VIN -0.3 4 V 75
Input voltage on any other pins VIN -0.3 4 V 75
Total current into sum of all VDD power lines (source) ∑IVDD 140 mA 76
Total current out of sum of all VSS ground lines (sink) ∑IVSS 140 mA 76
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 76
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 76
Output current sunk by any I/O and control pin IIO(PIN) 20 mA Except FT_f 76
Output current sourced by any I/O and control pin IIO(PIN) 20 mA Sourced 76
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) 100 mA Sunk 76
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) 100 mA Sourced 76
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 76
Storage temperature range TSTG -65 150 °C 77
Maximum junction temperature TJ 150 °C 77
Brown-out reset threshold 0 (VBOR0) VBOR0 1.62 1.66 1.7 V Rising edge 79
Brown-out reset threshold 0 (VBOR0) VBOR0 1.6 1.64 1.69 V Falling edge 79
Reset temporization after BOR0 is detected tRSTTEMPO 250 400 μs VDD rising 79
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +130 °C 82
Internal reference voltage spread over the temperature range ∆VREFINT 5 7.5 mV VDD = 3 V 82
Temperature coefficient TCoeff 30 50 ppm/°C -40°C < TA < +130°C 82
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 82
Supply current in Run mode IDD_ALL (Run) 7.3 7.75 mA Range 1, fHCLK = 80 MHz, 25 °C, all peripherals disable 85
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2) 0.79 2 µA VDD = 3 V, 25 °C 98
Supply current in Standby mode, RTC disabled IDD_ALL (Standby) 120 215 nA No independent watchdog, VDD = 3 V, 25 °C 103
Supply current in Shutdown mode, RTC disabled IDD_ALL (Shutdown) 31 97 nA VDD = 3 V, 25 °C 106
Backup domain supply current, RTC disabled IDD_VBAT (VBAT) 5 nA VBAT = 3 V, 25 °C 107

CAD (KiCad official)

  • Symbol: STM32L412KBU3
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: stm32l412kbu3-etched.step / stm32l412kbu3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l412kbu3.step / stm32l412kbu3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (192 pp, sha256 469ab19caba48d70, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF