main
Ray
Publish 0.1.0
590f8e9
STM32L151VCT6TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32L151VCT6TR from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_ETR, LCD_SEG38 and TRACECLK. |
| 2 | PE3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_CH1, LCD_SEG39 and TRACED0. |
| 3 | PE4 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_CH2 and TRACED1. |
| 4 | PE5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM9_CH1 and TRACED2. |
| 5 | PE6-WKUP3 | bidirectional | 5 V tolerant (FT) I/O with wakeup function WKUP3, also TIM9_CH2 and TRACED3. |
| 6 | VLCD | power_in | LCD power supply pin, connected to VDD on STM32L151xC devices per the datasheet footnote. |
| 7 | PC13-WKUP2 | bidirectional | 5 V tolerant (FT) I/O with wakeup function WKUP2 and RTC tamper/timestamp/output functions. |
| 8 | PC14-OSC32_IN | bidirectional | Standard 3.3 V I/O that is configured as OSC32_IN only when the LSE oscillator is on. |
| 9 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O that is configured as OSC32_OUT only when the LSE oscillator is on. |
| 10 | VSS_5 | power_in | Digital ground pin. |
| 11 | VDD_5 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O that is configured as OSC_IN only when the HSE oscillator is on (1 to 24 MHz crystal). |
| 13 | PH1-OSC_OUT | bidirectional | Standard 3.3 V I/O that is configured as OSC_OUT only when the HSE oscillator is on. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V tolerant (FT) I/O with analog input ADC_IN10 and COMP1_INP. |
| 16 | PC1 | bidirectional | 5 V tolerant (FT) I/O with analog input ADC_IN11 and COMP1_INP. |
| 17 | PC2 | bidirectional | 5 V tolerant (FT) I/O with analog input ADC_IN12 and COMP1_INP. |
| 18 | PC3 | bidirectional | Standard 3.3 V I/O with analog input ADC_IN13 and COMP1_INP. |
| 19 | VSSA | power_in | Analog ground pin; VSSA or VREF- must be tied to ground. |
| 20 | VREF- | power_in | Negative reference voltage for the ADC, to be tied to VSSA. |
| 21 | VREF+ | power_in | Positive reference voltage for the ADC and DAC, from 1.8 V up to VDDA. |
| 22 | VDDA | power_in | Analog supply pin for ADC, DAC, comparators and reset blocks, 1.8 V to 3.6 V. |
| 23 | PA0-WKUP1 | bidirectional | 5 V tolerant (FT) I/O with wakeup WKUP1, ADC_IN0, COMP1_INP and TIM2_CH1_ETR/USART2_CTS. |
| 24 | PA1 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN1, OPAMP1_VINP, TIM2_CH2 and USART2_RTS. |
| 25 | PA2 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN2, OPAMP1_VINM, TIM2_CH3 and USART2_TX. |
| 26 | PA3 | bidirectional | Standard 3.3 V I/O with ADC_IN3, OPAMP1_VOUT, TIM2_CH4 and USART2_RX. |
| 27 | VSS_4 | power_in | Digital ground pin. |
| 28 | VDD_4 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
| 29 | PA4 | bidirectional | Standard 3.3 V I/O with ADC_IN4, DAC_OUT1, COMP1_INP and SPI1_NSS/SPI3_NSS/USART2_CK. |
| 30 | PA5 | bidirectional | Standard 3.3 V I/O with ADC_IN5, DAC_OUT2, COMP1_INP and SPI1_SCK. |
| 31 | PA6 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN6, COMP1_INP, OPAMP2_VINP and SPI1_MISO. |
| 32 | PA7 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN7, COMP1_INP, OPAMP2_VINM and SPI1_MOSI. |
| 33 | PC4 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN14 and COMP1_INP. |
| 34 | PC5 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN15 and COMP1_INP. |
| 35 | PB0 | bidirectional | Standard 3.3 V I/O with ADC_IN8, COMP1_INP, OPAMP2_VOUT, VREF_OUT and TIM3_CH3. |
| 36 | PB1 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN9, COMP1_INP, VREF_OUT and TIM3_CH4. |
| 37 | PB2-BOOT1 | bidirectional | 5 V tolerant (FT) I/O that also serves as the BOOT1 boot configuration pin. |
| 38 | PE7 | bidirectional | Standard 3.3 V I/O with ADC_IN22 and COMP1_INP. |
| 39 | PE8 | bidirectional | Standard 3.3 V I/O with ADC_IN23 and COMP1_INP. |
| 40 | PE9 | bidirectional | Standard 3.3 V I/O with ADC_IN24, COMP1_INP and TIM2_CH1_ETR/TIM5_ETR. |
| 41 | PE10 | bidirectional | Standard 3.3 V I/O with ADC_IN25, COMP1_INP and TIM2_CH2. |
| 42 | PE11 | bidirectional | 5 V tolerant (FT) I/O with TIM2_CH3 and VLCDRAIL2. |
| 43 | PE12 | bidirectional | 5 V tolerant (FT) I/O with TIM2_CH4, SPI1_NSS and VLCDRAIL3. |
| 44 | PE13 | bidirectional | 5 V tolerant (FT) I/O with SPI1_SCK. |
| 45 | PE14 | bidirectional | 5 V tolerant (FT) I/O with SPI1_MISO. |
| 46 | PE15 | bidirectional | 5 V tolerant (FT) I/O with SPI1_MOSI. |
| 47 | PB10 | bidirectional | 5 V tolerant (FT) I/O with TIM2_CH3, I2C2_SCL, USART3_TX and LCD_SEG10. |
| 48 | PB11 | bidirectional | 5 V tolerant (FT) I/O with TIM2_CH4, I2C2_SDA, USART3_RX and LCD_SEG11. |
| 49 | VSS_1 | power_in | Digital ground pin. |
| 50 | VDD_1 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
| 51 | PB12 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN18, COMP1_INP, VLCDRAIL2, SPI2_NSS and I2C2_SMBA. |
| 52 | PB13 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN19, COMP1_INP, SPI2_SCK and TIM9_CH1. |
| 53 | PB14 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN20, COMP1_INP, SPI2_MISO and TIM9_CH2. |
| 54 | PB15 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN21, COMP1_INP, RTC_REFIN, SPI2_MOSI and TIM11_CH1. |
| 55 | PD8 | bidirectional | 5 V tolerant (FT) I/O with USART3_TX and LCD_SEG28. |
| 56 | PD9 | bidirectional | 5 V tolerant (FT) I/O with USART3_RX and LCD_SEG29. |
| 57 | PD10 | bidirectional | 5 V tolerant (FT) I/O with USART3_CK and LCD_SEG30. |
| 58 | PD11 | bidirectional | 5 V tolerant (FT) I/O with USART3_CTS and LCD_SEG31. |
| 59 | PD12 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH1, USART3_RTS and LCD_SEG32. |
| 60 | PD13 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH2 and LCD_SEG33. |
| 61 | PD14 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH3 and LCD_SEG34. |
| 62 | PD15 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH4 and LCD_SEG35. |
| 63 | PC6 | bidirectional | 5 V tolerant (FT) I/O with TIM3_CH1, I2S2_MCK and LCD_SEG24. |
| 64 | PC7 | bidirectional | 5 V tolerant (FT) I/O with TIM3_CH2, I2S3_MCK and LCD_SEG25. |
| 65 | PC8 | bidirectional | 5 V tolerant (FT) I/O with TIM3_CH3 and LCD_SEG26. |
| 66 | PC9 | bidirectional | 5 V tolerant (FT) I/O with TIM3_CH4 and LCD_SEG27. |
| 67 | PA8 | bidirectional | 5 V tolerant (FT) I/O with USART1_CK, MCO and LCD_COM0. |
| 68 | PA9 | bidirectional | 5 V tolerant (FT) I/O with USART1_TX and LCD_COM1. |
| 69 | PA10 | bidirectional | 5 V tolerant (FT) I/O with USART1_RX and LCD_COM2. |
| 70 | PA11 | bidirectional | 5 V tolerant (FT) I/O with USART1_CTS, SPI1_MISO and USB_DM. |
| 71 | PA12 | bidirectional | 5 V tolerant (FT) I/O with USART1_RTS, SPI1_MOSI and USB_DP. |
| 72 | PA13 | bidirectional | 5 V tolerant (FT) I/O with JTMS-SWDIO debug function. |
| 73 | PH2 | bidirectional | 5 V tolerant (FT) I/O with no alternate function listed in Table 9. |
| 74 | VSS_2 | power_in | Digital ground pin. |
| 75 | VDD_2 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
| 76 | PA14 | bidirectional | 5 V tolerant (FT) I/O with JTCK-SWCLK debug function. |
| 77 | PA15 | bidirectional | 5 V tolerant (FT) I/O with JTDI, TIM2_CH1_ETR, SPI1_NSS, SPI3_NSS and LCD_SEG17. |
| 78 | PC10 | bidirectional | 5 V tolerant (FT) I/O with SPI3_SCK, I2S3_CK, USART3_TX and LCD_SEG28/LCD_SEG40/LCD_COM4. |
| 79 | PC11 | bidirectional | 5 V tolerant (FT) I/O with SPI3_MISO, USART3_RX and LCD_SEG29/LCD_SEG41/LCD_COM5. |
| 80 | PC12 | bidirectional | 5 V tolerant (FT) I/O with SPI3_MOSI, I2S3_SD, USART3_CK and LCD_SEG30/LCD_SEG42/LCD_COM6. |
| 81 | PD0 | bidirectional | 5 V tolerant (FT) I/O with TIM9_CH1, SPI2_NSS and I2S2_WS. |
| 82 | PD1 | bidirectional | 5 V tolerant (FT) I/O with SPI2_SCK and I2S2_CK. |
| 83 | PD2 | bidirectional | 5 V tolerant (FT) I/O with TIM3_ETR, LCD_SEG31/LCD_SEG43 and LCD_COM7. |
| 84 | PD3 | bidirectional | 5 V tolerant (FT) I/O with SPI2_MISO and USART2_CTS. |
| 85 | PD4 | bidirectional | 5 V tolerant (FT) I/O with SPI2_MOSI, I2S2_SD and USART2_RTS. |
| 86 | PD5 | bidirectional | 5 V tolerant (FT) I/O with USART2_TX. |
| 87 | PD6 | bidirectional | 5 V tolerant (FT) I/O with USART2_RX. |
| 88 | PD7 | bidirectional | 5 V tolerant (FT) I/O with TIM9_CH2 and USART2_CK. |
| 89 | PB3 | bidirectional | 5 V tolerant (FT) I/O with JTDO, COMP2_INM, TIM2_CH2, SPI1_SCK and SPI3_SCK. |
| 90 | PB4 | bidirectional | 5 V tolerant (FT) I/O with NJTRST, COMP2_INP, TIM3_CH1, SPI1_MISO and SPI3_MISO. |
| 91 | PB5 | bidirectional | 5 V tolerant (FT) I/O with COMP2_INP, TIM3_CH2, I2C1_SMBA, SPI1_MOSI and SPI3_MOSI. |
| 92 | PB6 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH1, I2C1_SCL, USART1_TX and COMP2_INP. |
| 93 | PB7 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH2, I2C1_SDA, USART1_RX, COMP2_INP and PVD_IN. |
| 94 | BOOT0 | input | Dedicated BOOT0 boot configuration input pin. |
| 95 | PB8 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH3, TIM10_CH1, I2C1_SCL and LCD_SEG16. |
| 96 | PB9 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH4, TIM11_CH1, I2C1_SDA and LCD_COM3. |
| 97 | PE0 | bidirectional | 5 V tolerant (FT) I/O with TIM4_ETR, TIM10_CH1 and LCD_SEG36. |
| 98 | PE1 | bidirectional | 5 V tolerant (FT) I/O with TIM11_CH1 and LCD_SEG37. |
| 99 | VSS_3 | power_in | Digital ground pin. |
| 100 | VDD_3 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
STM32L151VCT6TR - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32l151vct6tr-etched.step/stm32l151vct6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l151vct6tr.step/stm32l151vct6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (136 pp, sha256
5e6d5674cd06c108, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L151VCT6TR
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32L151VCT6TR from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_ETR, LCD_SEG38 and TRACECLK. |
| 2 | PE3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_CH1, LCD_SEG39 and TRACED0. |
| 3 | PE4 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_CH2 and TRACED1. |
| 4 | PE5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM9_CH1 and TRACED2. |
| 5 | PE6-WKUP3 | bidirectional | 5 V tolerant (FT) I/O with wakeup function WKUP3, also TIM9_CH2 and TRACED3. |
| 6 | VLCD | power_in | LCD power supply pin, connected to VDD on STM32L151xC devices per the datasheet footnote. |
| 7 | PC13-WKUP2 | bidirectional | 5 V tolerant (FT) I/O with wakeup function WKUP2 and RTC tamper/timestamp/output functions. |
| 8 | PC14-OSC32_IN | bidirectional | Standard 3.3 V I/O that is configured as OSC32_IN only when the LSE oscillator is on. |
| 9 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O that is configured as OSC32_OUT only when the LSE oscillator is on. |
| 10 | VSS_5 | power_in | Digital ground pin. |
| 11 | VDD_5 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O that is configured as OSC_IN only when the HSE oscillator is on (1 to 24 MHz crystal). |
| 13 | PH1-OSC_OUT | bidirectional | Standard 3.3 V I/O that is configured as OSC_OUT only when the HSE oscillator is on. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V tolerant (FT) I/O with analog input ADC_IN10 and COMP1_INP. |
| 16 | PC1 | bidirectional | 5 V tolerant (FT) I/O with analog input ADC_IN11 and COMP1_INP. |
| 17 | PC2 | bidirectional | 5 V tolerant (FT) I/O with analog input ADC_IN12 and COMP1_INP. |
| 18 | PC3 | bidirectional | Standard 3.3 V I/O with analog input ADC_IN13 and COMP1_INP. |
| 19 | VSSA | power_in | Analog ground pin; VSSA or VREF- must be tied to ground. |
| 20 | VREF- | power_in | Negative reference voltage for the ADC, to be tied to VSSA. |
| 21 | VREF+ | power_in | Positive reference voltage for the ADC and DAC, from 1.8 V up to VDDA. |
| 22 | VDDA | power_in | Analog supply pin for ADC, DAC, comparators and reset blocks, 1.8 V to 3.6 V. |
| 23 | PA0-WKUP1 | bidirectional | 5 V tolerant (FT) I/O with wakeup WKUP1, ADC_IN0, COMP1_INP and TIM2_CH1_ETR/USART2_CTS. |
| 24 | PA1 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN1, OPAMP1_VINP, TIM2_CH2 and USART2_RTS. |
| 25 | PA2 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN2, OPAMP1_VINM, TIM2_CH3 and USART2_TX. |
| 26 | PA3 | bidirectional | Standard 3.3 V I/O with ADC_IN3, OPAMP1_VOUT, TIM2_CH4 and USART2_RX. |
| 27 | VSS_4 | power_in | Digital ground pin. |
| 28 | VDD_4 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
| 29 | PA4 | bidirectional | Standard 3.3 V I/O with ADC_IN4, DAC_OUT1, COMP1_INP and SPI1_NSS/SPI3_NSS/USART2_CK. |
| 30 | PA5 | bidirectional | Standard 3.3 V I/O with ADC_IN5, DAC_OUT2, COMP1_INP and SPI1_SCK. |
| 31 | PA6 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN6, COMP1_INP, OPAMP2_VINP and SPI1_MISO. |
| 32 | PA7 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN7, COMP1_INP, OPAMP2_VINM and SPI1_MOSI. |
| 33 | PC4 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN14 and COMP1_INP. |
| 34 | PC5 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN15 and COMP1_INP. |
| 35 | PB0 | bidirectional | Standard 3.3 V I/O with ADC_IN8, COMP1_INP, OPAMP2_VOUT, VREF_OUT and TIM3_CH3. |
| 36 | PB1 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN9, COMP1_INP, VREF_OUT and TIM3_CH4. |
| 37 | PB2-BOOT1 | bidirectional | 5 V tolerant (FT) I/O that also serves as the BOOT1 boot configuration pin. |
| 38 | PE7 | bidirectional | Standard 3.3 V I/O with ADC_IN22 and COMP1_INP. |
| 39 | PE8 | bidirectional | Standard 3.3 V I/O with ADC_IN23 and COMP1_INP. |
| 40 | PE9 | bidirectional | Standard 3.3 V I/O with ADC_IN24, COMP1_INP and TIM2_CH1_ETR/TIM5_ETR. |
| 41 | PE10 | bidirectional | Standard 3.3 V I/O with ADC_IN25, COMP1_INP and TIM2_CH2. |
| 42 | PE11 | bidirectional | 5 V tolerant (FT) I/O with TIM2_CH3 and VLCDRAIL2. |
| 43 | PE12 | bidirectional | 5 V tolerant (FT) I/O with TIM2_CH4, SPI1_NSS and VLCDRAIL3. |
| 44 | PE13 | bidirectional | 5 V tolerant (FT) I/O with SPI1_SCK. |
| 45 | PE14 | bidirectional | 5 V tolerant (FT) I/O with SPI1_MISO. |
| 46 | PE15 | bidirectional | 5 V tolerant (FT) I/O with SPI1_MOSI. |
| 47 | PB10 | bidirectional | 5 V tolerant (FT) I/O with TIM2_CH3, I2C2_SCL, USART3_TX and LCD_SEG10. |
| 48 | PB11 | bidirectional | 5 V tolerant (FT) I/O with TIM2_CH4, I2C2_SDA, USART3_RX and LCD_SEG11. |
| 49 | VSS_1 | power_in | Digital ground pin. |
| 50 | VDD_1 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
| 51 | PB12 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN18, COMP1_INP, VLCDRAIL2, SPI2_NSS and I2C2_SMBA. |
| 52 | PB13 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN19, COMP1_INP, SPI2_SCK and TIM9_CH1. |
| 53 | PB14 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN20, COMP1_INP, SPI2_MISO and TIM9_CH2. |
| 54 | PB15 | bidirectional | 5 V tolerant (FT) I/O with ADC_IN21, COMP1_INP, RTC_REFIN, SPI2_MOSI and TIM11_CH1. |
| 55 | PD8 | bidirectional | 5 V tolerant (FT) I/O with USART3_TX and LCD_SEG28. |
| 56 | PD9 | bidirectional | 5 V tolerant (FT) I/O with USART3_RX and LCD_SEG29. |
| 57 | PD10 | bidirectional | 5 V tolerant (FT) I/O with USART3_CK and LCD_SEG30. |
| 58 | PD11 | bidirectional | 5 V tolerant (FT) I/O with USART3_CTS and LCD_SEG31. |
| 59 | PD12 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH1, USART3_RTS and LCD_SEG32. |
| 60 | PD13 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH2 and LCD_SEG33. |
| 61 | PD14 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH3 and LCD_SEG34. |
| 62 | PD15 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH4 and LCD_SEG35. |
| 63 | PC6 | bidirectional | 5 V tolerant (FT) I/O with TIM3_CH1, I2S2_MCK and LCD_SEG24. |
| 64 | PC7 | bidirectional | 5 V tolerant (FT) I/O with TIM3_CH2, I2S3_MCK and LCD_SEG25. |
| 65 | PC8 | bidirectional | 5 V tolerant (FT) I/O with TIM3_CH3 and LCD_SEG26. |
| 66 | PC9 | bidirectional | 5 V tolerant (FT) I/O with TIM3_CH4 and LCD_SEG27. |
| 67 | PA8 | bidirectional | 5 V tolerant (FT) I/O with USART1_CK, MCO and LCD_COM0. |
| 68 | PA9 | bidirectional | 5 V tolerant (FT) I/O with USART1_TX and LCD_COM1. |
| 69 | PA10 | bidirectional | 5 V tolerant (FT) I/O with USART1_RX and LCD_COM2. |
| 70 | PA11 | bidirectional | 5 V tolerant (FT) I/O with USART1_CTS, SPI1_MISO and USB_DM. |
| 71 | PA12 | bidirectional | 5 V tolerant (FT) I/O with USART1_RTS, SPI1_MOSI and USB_DP. |
| 72 | PA13 | bidirectional | 5 V tolerant (FT) I/O with JTMS-SWDIO debug function. |
| 73 | PH2 | bidirectional | 5 V tolerant (FT) I/O with no alternate function listed in Table 9. |
| 74 | VSS_2 | power_in | Digital ground pin. |
| 75 | VDD_2 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
| 76 | PA14 | bidirectional | 5 V tolerant (FT) I/O with JTCK-SWCLK debug function. |
| 77 | PA15 | bidirectional | 5 V tolerant (FT) I/O with JTDI, TIM2_CH1_ETR, SPI1_NSS, SPI3_NSS and LCD_SEG17. |
| 78 | PC10 | bidirectional | 5 V tolerant (FT) I/O with SPI3_SCK, I2S3_CK, USART3_TX and LCD_SEG28/LCD_SEG40/LCD_COM4. |
| 79 | PC11 | bidirectional | 5 V tolerant (FT) I/O with SPI3_MISO, USART3_RX and LCD_SEG29/LCD_SEG41/LCD_COM5. |
| 80 | PC12 | bidirectional | 5 V tolerant (FT) I/O with SPI3_MOSI, I2S3_SD, USART3_CK and LCD_SEG30/LCD_SEG42/LCD_COM6. |
| 81 | PD0 | bidirectional | 5 V tolerant (FT) I/O with TIM9_CH1, SPI2_NSS and I2S2_WS. |
| 82 | PD1 | bidirectional | 5 V tolerant (FT) I/O with SPI2_SCK and I2S2_CK. |
| 83 | PD2 | bidirectional | 5 V tolerant (FT) I/O with TIM3_ETR, LCD_SEG31/LCD_SEG43 and LCD_COM7. |
| 84 | PD3 | bidirectional | 5 V tolerant (FT) I/O with SPI2_MISO and USART2_CTS. |
| 85 | PD4 | bidirectional | 5 V tolerant (FT) I/O with SPI2_MOSI, I2S2_SD and USART2_RTS. |
| 86 | PD5 | bidirectional | 5 V tolerant (FT) I/O with USART2_TX. |
| 87 | PD6 | bidirectional | 5 V tolerant (FT) I/O with USART2_RX. |
| 88 | PD7 | bidirectional | 5 V tolerant (FT) I/O with TIM9_CH2 and USART2_CK. |
| 89 | PB3 | bidirectional | 5 V tolerant (FT) I/O with JTDO, COMP2_INM, TIM2_CH2, SPI1_SCK and SPI3_SCK. |
| 90 | PB4 | bidirectional | 5 V tolerant (FT) I/O with NJTRST, COMP2_INP, TIM3_CH1, SPI1_MISO and SPI3_MISO. |
| 91 | PB5 | bidirectional | 5 V tolerant (FT) I/O with COMP2_INP, TIM3_CH2, I2C1_SMBA, SPI1_MOSI and SPI3_MOSI. |
| 92 | PB6 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH1, I2C1_SCL, USART1_TX and COMP2_INP. |
| 93 | PB7 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH2, I2C1_SDA, USART1_RX, COMP2_INP and PVD_IN. |
| 94 | BOOT0 | input | Dedicated BOOT0 boot configuration input pin. |
| 95 | PB8 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH3, TIM10_CH1, I2C1_SCL and LCD_SEG16. |
| 96 | PB9 | bidirectional | 5 V tolerant (FT) I/O with TIM4_CH4, TIM11_CH1, I2C1_SDA and LCD_COM3. |
| 97 | PE0 | bidirectional | 5 V tolerant (FT) I/O with TIM4_ETR, TIM10_CH1 and LCD_SEG36. |
| 98 | PE1 | bidirectional | 5 V tolerant (FT) I/O with TIM11_CH1 and LCD_SEG37. |
| 99 | VSS_3 | power_in | Digital ground pin. |
| 100 | VDD_3 | power_in | Digital supply pin; device operates from 1.65 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## CAD (KiCad official)
- Symbol: `STM32L151VCT6TR`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `stm32l151vct6tr-etched.step` / `stm32l151vct6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l151vct6tr.step` / `stm32l151vct6tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32l151vct6tr.pdf) (136 pp, sha256 `5e6d5674cd06c108`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l151vct6tr-datasheet.pdf)