component
STM32L151V8T6A
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
58423e6
STM32L151V8T6A
STMicroelectronics · ST Microelectronics · LQFP-100(14x14)
STM32L151V8T6A from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant I/O (FT) with default function PE2; alternate functions TRACECLK, LCD_SEG38 and TIM3_ETR. |
| 2 | PE3 | bidirectional | 5 V-tolerant I/O (FT) with default function PE3; alternate functions TRACED0, LCD_SEG39 and TIM3_CH1. |
| 3 | PE4 | bidirectional | 5 V-tolerant I/O (FT) with default function PE4; alternate functions TRACED1 and TIM3_CH2. |
| 4 | PE5 | bidirectional | 5 V-tolerant I/O (FT) with default function PE5; alternate functions TRACED2 and TIM9_CH1. |
| 5 | PE6-WKUP3 | bidirectional | 5 V-tolerant I/O (FT) with default function PE6; alternate functions TRACED3 and TIM9_CH2; additional function WKUP3/RTC_TAMP3 (wakeup input). |
| 6 | VLCD | power_in | LCD supply pin (type S); per note 3 it applies to STM32L152 devices only, and on STM32L151 devices this pin must be connected to VDD. |
| 7 | PC13-WKUP2 | bidirectional | 5 V-tolerant I/O (FT) with default function PC13; additional functions RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2. |
| 8 | PC14-OSC32_IN | bidirectional | Standard 3.3 V I/O (TC) with default function PC14; it is OSC32_IN when the LSE oscillator is on (LSEON), otherwise general-purpose PC14. |
| 9 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) with default function PC15; it is OSC32_OUT when the LSE oscillator is on (LSEON), otherwise general-purpose PC15. |
| 10 | VSS_5 | power_in | Ground pin VSS_5 (type S). |
| 11 | VDD_5 | power_in | Supply pin VDD_5 (type S). |
| 12 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O (TC) with default function PH0; it is OSC_IN when the HSE oscillator is on (HSEON), otherwise general-purpose PH0. |
| 13 | PH1-OSC_OUT | bidirectional | Standard 3.3 V I/O (TC) with default function PH1; it is OSC_OUT when the HSE oscillator is on (HSEON), otherwise general-purpose PH1. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor (type I/O RST). |
| 15 | PC0 | bidirectional | 5 V-tolerant I/O (FT) with default function PC0; alternate function LCD_SEG18; additional functions ADC_IN10 and COMP1_INP. |
| 16 | PC1 | bidirectional | 5 V-tolerant I/O (FT) with default function PC1; alternate function LCD_SEG19; additional functions ADC_IN11 and COMP1_INP. |
| 17 | PC2 | bidirectional | 5 V-tolerant I/O (FT) with default function PC2; alternate function LCD_SEG20; additional functions ADC_IN12 and COMP1_INP. |
| 18 | PC3 | bidirectional | Standard 3.3 V I/O (TC) with default function PC3; alternate function LCD_SEG21; additional functions ADC_IN13 and COMP1_INP. |
| 19 | VSSA | power_in | Analog ground pin VSSA (type S). |
| 20 | VREF- | power_in | Negative reference voltage pin (type S); per the ADC section it must be tied to ground (VSSA or VREF-). |
| 21 | VREF+ | power_in | Positive ADC/DAC reference voltage pin (type S); per the ADC section it must be at or below VDDA and may be grounded if neither ADC nor DAC is used. |
| 22 | VDDA | power_in | Analog supply pin VDDA (type S); the ADC table gives VDDA from 1.8 V to 3.6 V. |
| 23 | PA0-WKUP1 | bidirectional | 5 V-tolerant I/O (FT) with default function PA0; alternate functions USART2_CTS and TIM2_CH1_ETR; additional functions WKUP1, ADC_IN0, COMP1_INP and RTC_TAMP2. |
| 24 | PA1 | bidirectional | 5 V-tolerant I/O (FT) with default function PA1; alternate functions USART2_RTS, TIM2_CH2 and LCD_SEG0; additional functions ADC_IN1 and COMP1_INP. |
| 25 | PA2 | bidirectional | 5 V-tolerant I/O (FT) with default function PA2; alternate functions USART2_TX, TIM2_CH3, TIM9_CH1 and LCD_SEG1; additional functions ADC_IN2 and COMP1_INP. |
| 26 | PA3 | bidirectional | Standard 3.3 V I/O (TC) with default function PA3; alternate functions USART2_RX, TIM2_CH4, TIM9_CH2 and LCD_SEG2; additional functions ADC_IN3 and COMP1_INP. |
| 27 | VSS_4 | power_in | Ground pin VSS_4 (type S). |
| 28 | VDD_4 | power_in | Supply pin VDD_4 (type S). |
| 29 | PA4 | bidirectional | Standard 3.3 V I/O (TC) with default function PA4; alternate functions SPI1_NSS and USART2_CK; additional functions ADC_IN4, DAC_OUT1 and COMP1_INP. |
| 30 | PA5 | bidirectional | Standard 3.3 V I/O (TC) with default function PA5; alternate functions SPI1_SCK and TIM2_CH1_ETR; additional functions ADC_IN5, DAC_OUT2 and COMP1_INP. |
| 31 | PA6 | bidirectional | 5 V-tolerant I/O (FT) with default function PA6; alternate functions SPI1_MISO, TIM3_CH1, LCD_SEG3 and TIM10_CH1; additional functions ADC_IN6 and COMP1_INP. |
| 32 | PA7 | bidirectional | 5 V-tolerant I/O (FT) with default function PA7; alternate functions SPI1_MOSI, TIM3_CH2, LCD_SEG4 and TIM11_CH1; additional functions ADC_IN7 and COMP1_INP. |
| 33 | PC4 | bidirectional | 5 V-tolerant I/O (FT) with default function PC4; alternate function LCD_SEG22; additional functions ADC_IN14 and COMP1_INP. |
| 34 | PC5 | bidirectional | 5 V-tolerant I/O (FT) with default function PC5; alternate function LCD_SEG23; additional functions ADC_IN15 and COMP1_INP. |
| 35 | PB0 | bidirectional | Standard 3.3 V I/O (TC) with default function PB0; alternate functions TIM3_CH3 and LCD_SEG5; additional functions ADC_IN8, COMP1_INP, VREF_OUT and VLCDRAIL3. |
| 36 | PB1 | bidirectional | 5 V-tolerant I/O (FT) with default function PB1; alternate functions TIM3_CH4 and LCD_SEG6; additional functions ADC_IN9, COMP1_INP and VREF_OUT. |
| 37 | PB2 | bidirectional | 5 V-tolerant I/O (FT) with default function PB2; alternate function BOOT1; additional function VLCDRAIL1. |
| 38 | PE7 | bidirectional | Standard 3.3 V I/O (TC) with default function PE7; additional functions ADC_IN22 and COMP1_INP. |
| 39 | PE8 | bidirectional | Standard 3.3 V I/O (TC) with default function PE8; additional functions ADC_IN23 and COMP1_INP. |
| 40 | PE9 | bidirectional | Standard 3.3 V I/O (TC) with default function PE9; alternate function TIM2_CH1_ETR; additional functions ADC_IN24 and COMP1_INP. |
| 41 | PE10 | bidirectional | Standard 3.3 V I/O (TC) with default function PE10; alternate function TIM2_CH2; additional functions ADC_IN25 and COMP1_INP. |
| 42 | PE11 | bidirectional | 5 V-tolerant I/O (FT) with default function PE11; alternate function TIM2_CH3; additional function VLCDRAIL2. |
| 43 | PE12 | bidirectional | 5 V-tolerant I/O (FT) with default function PE12; alternate functions TIM2_CH4 and SPI1_NSS; additional function VLCDRAIL3. |
| 44 | PE13 | bidirectional | 5 V-tolerant I/O (FT) with default function PE13; alternate function SPI1_SCK. |
| 45 | PE14 | bidirectional | 5 V-tolerant I/O (FT) with default function PE14; alternate function SPI1_MISO. |
| 46 | PE15 | bidirectional | 5 V-tolerant I/O (FT) with default function PE15; alternate function SPI1_MOSI. |
| 47 | PB10 | bidirectional | 5 V-tolerant I/O (FT) with default function PB10; alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10. |
| 48 | PB11 | bidirectional | 5 V-tolerant I/O (FT) with default function PB11; alternate functions I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11. |
| 49 | VSS_1 | power_in | Ground pin VSS_1 (type S). |
| 50 | VDD_1 | power_in | Supply pin VDD_1 (type S). |
| 51 | PB12 | bidirectional | 5 V-tolerant I/O (FT) with default function PB12; alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12 and TIM10_CH1; additional functions ADC_IN18, COMP1_INP and VLCDRAIL2. |
| 52 | PB13 | bidirectional | 5 V-tolerant I/O (FT) with default function PB13; alternate functions SPI2_SCK, USART3_CTS, LCD_SEG13 and TIM9_CH1; additional functions ADC_IN19 and COMP1_INP. |
| 53 | PB14 | bidirectional | 5 V-tolerant I/O (FT) with default function PB14; alternate functions SPI2_MISO, USART3_RTS, LCD_SEG14 and TIM9_CH2; additional functions ADC_IN20 and COMP1_INP. |
| 54 | PB15 | bidirectional | 5 V-tolerant I/O (FT) with default function PB15; alternate functions SPI2_MOSI, LCD_SEG15 and TIM11_CH1; additional functions ADC_IN21, COMP1_INP and RTC_REFIN. |
| 55 | PD8 | bidirectional | 5 V-tolerant I/O (FT) with default function PD8; alternate functions USART3_TX and LCD_SEG28. |
| 56 | PD9 | bidirectional | 5 V-tolerant I/O (FT) with default function PD9; alternate functions USART3_RX and LCD_SEG29. |
| 57 | PD10 | bidirectional | 5 V-tolerant I/O (FT) with default function PD10; alternate functions USART3_CK and LCD_SEG30. |
| 58 | PD11 | bidirectional | 5 V-tolerant I/O (FT) with default function PD11; alternate functions USART3_CTS and LCD_SEG31. |
| 59 | PD12 | bidirectional | 5 V-tolerant I/O (FT) with default function PD12; alternate functions TIM4_CH1, USART3_RTS and LCD_SEG32. |
| 60 | PD13 | bidirectional | 5 V-tolerant I/O (FT) with default function PD13; alternate functions TIM4_CH2 and LCD_SEG33. |
| 61 | PD14 | bidirectional | 5 V-tolerant I/O (FT) with default function PD14; alternate functions TIM4_CH3 and LCD_SEG34. |
| 62 | PD15 | bidirectional | 5 V-tolerant I/O (FT) with default function PD15; alternate functions TIM4_CH4 and LCD_SEG35. |
| 63 | PC6 | bidirectional | 5 V-tolerant I/O (FT) with default function PC6; alternate functions TIM3_CH1 and LCD_SEG24. |
| 64 | PC7 | bidirectional | 5 V-tolerant I/O (FT) with default function PC7; alternate functions TIM3_CH2 and LCD_SEG25. |
| 65 | PC8 | bidirectional | 5 V-tolerant I/O (FT) with default function PC8; alternate functions TIM3_CH3 and LCD_SEG26. |
| 66 | PC9 | bidirectional | 5 V-tolerant I/O (FT) with default function PC9; alternate functions TIM3_CH4 and LCD_SEG27. |
| 67 | PA8 | bidirectional | 5 V-tolerant I/O (FT) with default function PA8; alternate functions USART1_CK, MCO and LCD_COM0. |
| 68 | PA9 | bidirectional | 5 V-tolerant I/O (FT) with default function PA9; alternate functions USART1_TX and LCD_COM1. |
| 69 | PA10 | bidirectional | 5 V-tolerant I/O (FT) with default function PA10; alternate functions USART1_RX and LCD_COM2. |
| 70 | PA11 | bidirectional | 5 V-tolerant I/O (FT) with default function PA11; alternate functions USART1_CTS and SPI1_MISO; additional function USB_DM. |
| 71 | PA12 | bidirectional | 5 V-tolerant I/O (FT) with default function PA12; alternate functions USART1_RTS and SPI1_MOSI; additional function USB_DP. |
| 72 | PA13 | bidirectional | 5 V-tolerant I/O (FT) with default function JTMS-SWDIO (serial wire debug data input/output). |
| 73 | PH2 | bidirectional | 5 V-tolerant I/O (FT) with default function PH2; no alternate function is listed for this pin. |
| 74 | VSS_2 | power_in | Ground pin VSS_2 (type S). |
| 75 | VDD_2 | power_in | Supply pin VDD_2 (type S). |
| 76 | PA14 | bidirectional | 5 V-tolerant I/O (FT) with default function JTCK-SWCLK (serial wire debug clock). |
| 77 | PA15 | bidirectional | 5 V-tolerant I/O (FT) with default function JTDI; alternate functions TIM2_CH1_ETR, SPI1_NSS and LCD_SEG17. |
| 78 | PC10 | bidirectional | 5 V-tolerant I/O (FT) with default function PC10; alternate functions USART3_TX, LCD_SEG28, LCD_SEG40 and LCD_COM4. |
| 79 | PC11 | bidirectional | 5 V-tolerant I/O (FT) with default function PC11; alternate functions USART3_RX, LCD_SEG29, LCD_SEG41 and LCD_COM5. |
| 80 | PC12 | bidirectional | 5 V-tolerant I/O (FT) with default function PC12; alternate functions USART3_CK, LCD_SEG30, LCD_SEG42 and LCD_COM6. |
| 81 | PD0 | bidirectional | 5 V-tolerant I/O (FT) with default function PD0; alternate functions SPI2_NSS and TIM9_CH1. |
| 82 | PD1 | bidirectional | 5 V-tolerant I/O (FT) with default function PD1; alternate function SPI2_SCK. |
| 83 | PD2 | bidirectional | 5 V-tolerant I/O (FT) with default function PD2; alternate functions TIM3_ETR, LCD_SEG31, LCD_SEG43 and LCD_COM7. |
| 84 | PD3 | bidirectional | 5 V-tolerant I/O (FT) with default function PD3; alternate functions USART2_CTS and SPI2_MISO. |
| 85 | PD4 | bidirectional | 5 V-tolerant I/O (FT) with default function PD4; alternate functions USART2_RTS and SPI2_MOSI. |
| 86 | PD5 | bidirectional | 5 V-tolerant I/O (FT) with default function PD5; alternate function USART2_TX. |
| 87 | PD6 | bidirectional | 5 V-tolerant I/O (FT) with default function PD6; alternate function USART2_RX. |
| 88 | PD7 | bidirectional | 5 V-tolerant I/O (FT) with default function PD7; alternate functions USART2_CK and TIM9_CH2. |
| 89 | PB3 | bidirectional | 5 V-tolerant I/O (FT) with default function JTDO; alternate functions TIM2_CH2, SPI1_SCK and LCD_SEG7; additional function COMP2_INM. |
| 90 | PB4 | bidirectional | 5 V-tolerant I/O (FT) with default function NJTRST; alternate functions TIM3_CH1, SPI1_MISO and LCD_SEG8; additional function COMP2_INP. |
| 91 | PB5 | bidirectional | 5 V-tolerant I/O (FT) with default function PB5; alternate functions I2C1_SMBA, TIM3_CH2, SPI1_MOSI and LCD_SEG9; additional function COMP2_INP. |
| 92 | PB6 | bidirectional | 5 V-tolerant I/O (FT) with default function PB6; alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX. |
| 93 | PB7 | bidirectional | 5 V-tolerant I/O (FT) with default function PB7; alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX; additional function PVD_IN. |
| 94 | BOOT0 | input | Dedicated BOOT0 input pin (type I, input only) that selects the boot mode. |
| 95 | PB8 | bidirectional | 5 V-tolerant I/O (FT) with default function PB8; alternate functions TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1. |
| 96 | PB9 | bidirectional | 5 V-tolerant I/O (FT) with default function PB9; alternate functions TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1. |
| 97 | PE0 | bidirectional | 5 V-tolerant I/O (FT) with default function PE0; alternate functions TIM4_ETR, LCD_SEG36 and TIM10_CH1. |
| 98 | PE1 | bidirectional | 5 V-tolerant I/O (FT) with default function PE1; alternate functions LCD_SEG37 and TIM11_CH1. |
| 99 | VSS_3 | power_in | Ground pin VSS_3 (type S). |
| 100 | VDD_3 | power_in | Supply pin VDD_3 (type S). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA and VDD) | VDD-VSS | -0.3 | 4 | V | 55 | ||
| Input voltage on any other pin | VIN | -0.3 | 4 | V | 55 | ||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 55 | |||
| Variations between all different ground pins | /VSSx −VSS/ | 50 | mV | 55 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ −VDDA | 0.4 | V | 55 | |||
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | 100 | mA | 55 | |||
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | 100 | mA | 55 | |||
| Maximum current into each VDD_x power pin (source) | IVDD(PIN) | 70 | mA | 55 | |||
| Maximum current out of each VSS_x ground pin (sink) | IVSS(PIN) | -70 | mA | 55 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 55 | |||
| Output current sourced by any I/O and control pin | IIO | -25 | mA | 55 | |||
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | 60 | mA | 55 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -60 | mA | 55 | |||
| Injected current on five-volt tolerant I/O, RST and B pins | IINJ(PIN) | -5 | 0 | mA | 55 | ||
| Injected current on any other pin | IINJ(PIN) | -5 | 5 | mA | 55 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 55 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 56 | ||
| Maximum junction temperature | TJ | 150 | °C | 56 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 56 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 56 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 56 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 56 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power on | 56 | |
| Analog operating voltage | VDDA | 1.65 | 3.6 | V | ADC and DAC not used; must be the same voltage as VDD | 56 | |
| Analog operating voltage | VDDA | 1.8 | 3.6 | V | ADC or DAC used | 56 | |
| I/O input voltage, FT pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD | 56 | |
| I/O input voltage, FT pins | VIN | -0.3 | 5.25 | V | VDD < 2.0 V | 56 | |
| I/O input voltage, BOOT0 | VIN | 0 | 5.5 | V | BOOT0 | 56 | |
| I/O input voltage, any other pin | VIN | -0.3 | V | 56 | |||
| Ambient temperature for 6 suffix version | TA | -40 | 85 | °C | Maximum power dissipation | 57 | |
| Junction temperature range, 6 suffix version | TJ | -40 | 105 | °C | 57 | ||
| Power dissipation, LQFP100 package | PD | 435 | mW | TA = 85 °C for suffix 6 | 57 | ||
| VDD rise time rate | tVDD | 0 | 1000 | µs/V | BOR detector disabled | 57 | |
| VDD fall time rate | tVDD | 0 | 1000 | µs/V | BOR detector disabled | 57 | |
| Reset temporization | TRSTTEMPO | 2 | 3.3 | ms | VDD rising, BOR enabled | 57 | |
| Reset temporization | TRSTTEMPO | 0.4 | 0.7 | 1.6 | ms | VDD rising, BOR disabled | 57 |
| Power on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 57 |
| Power on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 57 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 58 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 58 |
| Brown-out reset threshold 1 | VBOR1 | 1.87 | 1.93 | 1.97 | V | Falling edge | 58 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2.03 | 2.07 | V | Rising edge | 58 |
| Brown-out reset threshold 2 | VBOR2 | 2.22 | 2.3 | 2.35 | V | Falling edge | 58 |
| Brown-out reset threshold 2 | VBOR2 | 2.31 | 2.41 | 2.44 | V | Rising edge | 58 |
| Brown-out reset threshold 3 | VBOR3 | 2.45 | 2.55 | 2.6 | V | Falling edge | 58 |
| Brown-out reset threshold 3 | VBOR3 | 2.54 | 2.66 | 2.7 | V | Rising edge | 58 |
| Brown-out reset threshold 4 | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 58 |
| Brown-out reset threshold 4 | VBOR4 | 2.78 | 2.9 | 2.95 | V | Rising edge | 58 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | −40 °C < TJ < +110 °C | 59 |
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | −40 °C < TJ < +110 °C | 59 | |
| Accuracy of the factory-calibrated HSI oscillator | ACCHSI | -4 | 3 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 105 °C | 77 | |
| HSE oscillator frequency | fOSC_IN | 1 | 24 | MHz | 73 | ||
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 79 | ||
| Supply current in Run mode, code executed from Flash | IDD (Run from Flash) | 8.25 | 9.6 | mA | Range 1, VCORE=1.8 V, VOS[1:0] = 01, fHCLK = 32 MHz | 61 | |
| Max allowed current in Low-power run mode | IDD Max (LP Run) | 200 | µA | VDD from 1.65 V to 3.6 V | 64 | ||
| Max allowed current in Low-power sleep mode | IDD Max (LP Sleep) | 200 | µA | VDD from 1.65 V to 3.6 V | 65 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | TLEAD Maximum lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK® | 56 |
CAD (KiCad official)
- Symbol:
STM32L151V8T6A - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32l151v8t6a-etched.step/stm32l151v8t6a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l151v8t6a.step/stm32l151v8t6a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (130 pp, sha256
e5e0ab791f4e7879, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L151V8T6A
**STMicroelectronics** · ST Microelectronics · LQFP-100(14x14)
STM32L151V8T6A from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant I/O (FT) with default function PE2; alternate functions TRACECLK, LCD_SEG38 and TIM3_ETR. |
| 2 | PE3 | bidirectional | 5 V-tolerant I/O (FT) with default function PE3; alternate functions TRACED0, LCD_SEG39 and TIM3_CH1. |
| 3 | PE4 | bidirectional | 5 V-tolerant I/O (FT) with default function PE4; alternate functions TRACED1 and TIM3_CH2. |
| 4 | PE5 | bidirectional | 5 V-tolerant I/O (FT) with default function PE5; alternate functions TRACED2 and TIM9_CH1. |
| 5 | PE6-WKUP3 | bidirectional | 5 V-tolerant I/O (FT) with default function PE6; alternate functions TRACED3 and TIM9_CH2; additional function WKUP3/RTC_TAMP3 (wakeup input). |
| 6 | VLCD | power_in | LCD supply pin (type S); per note 3 it applies to STM32L152 devices only, and on STM32L151 devices this pin must be connected to VDD. |
| 7 | PC13-WKUP2 | bidirectional | 5 V-tolerant I/O (FT) with default function PC13; additional functions RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2. |
| 8 | PC14-OSC32_IN | bidirectional | Standard 3.3 V I/O (TC) with default function PC14; it is OSC32_IN when the LSE oscillator is on (LSEON), otherwise general-purpose PC14. |
| 9 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) with default function PC15; it is OSC32_OUT when the LSE oscillator is on (LSEON), otherwise general-purpose PC15. |
| 10 | VSS_5 | power_in | Ground pin VSS_5 (type S). |
| 11 | VDD_5 | power_in | Supply pin VDD_5 (type S). |
| 12 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O (TC) with default function PH0; it is OSC_IN when the HSE oscillator is on (HSEON), otherwise general-purpose PH0. |
| 13 | PH1-OSC_OUT | bidirectional | Standard 3.3 V I/O (TC) with default function PH1; it is OSC_OUT when the HSE oscillator is on (HSEON), otherwise general-purpose PH1. |
| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor (type I/O RST). |
| 15 | PC0 | bidirectional | 5 V-tolerant I/O (FT) with default function PC0; alternate function LCD_SEG18; additional functions ADC_IN10 and COMP1_INP. |
| 16 | PC1 | bidirectional | 5 V-tolerant I/O (FT) with default function PC1; alternate function LCD_SEG19; additional functions ADC_IN11 and COMP1_INP. |
| 17 | PC2 | bidirectional | 5 V-tolerant I/O (FT) with default function PC2; alternate function LCD_SEG20; additional functions ADC_IN12 and COMP1_INP. |
| 18 | PC3 | bidirectional | Standard 3.3 V I/O (TC) with default function PC3; alternate function LCD_SEG21; additional functions ADC_IN13 and COMP1_INP. |
| 19 | VSSA | power_in | Analog ground pin VSSA (type S). |
| 20 | VREF- | power_in | Negative reference voltage pin (type S); per the ADC section it must be tied to ground (VSSA or VREF-). |
| 21 | VREF+ | power_in | Positive ADC/DAC reference voltage pin (type S); per the ADC section it must be at or below VDDA and may be grounded if neither ADC nor DAC is used. |
| 22 | VDDA | power_in | Analog supply pin VDDA (type S); the ADC table gives VDDA from 1.8 V to 3.6 V. |
| 23 | PA0-WKUP1 | bidirectional | 5 V-tolerant I/O (FT) with default function PA0; alternate functions USART2_CTS and TIM2_CH1_ETR; additional functions WKUP1, ADC_IN0, COMP1_INP and RTC_TAMP2. |
| 24 | PA1 | bidirectional | 5 V-tolerant I/O (FT) with default function PA1; alternate functions USART2_RTS, TIM2_CH2 and LCD_SEG0; additional functions ADC_IN1 and COMP1_INP. |
| 25 | PA2 | bidirectional | 5 V-tolerant I/O (FT) with default function PA2; alternate functions USART2_TX, TIM2_CH3, TIM9_CH1 and LCD_SEG1; additional functions ADC_IN2 and COMP1_INP. |
| 26 | PA3 | bidirectional | Standard 3.3 V I/O (TC) with default function PA3; alternate functions USART2_RX, TIM2_CH4, TIM9_CH2 and LCD_SEG2; additional functions ADC_IN3 and COMP1_INP. |
| 27 | VSS_4 | power_in | Ground pin VSS_4 (type S). |
| 28 | VDD_4 | power_in | Supply pin VDD_4 (type S). |
| 29 | PA4 | bidirectional | Standard 3.3 V I/O (TC) with default function PA4; alternate functions SPI1_NSS and USART2_CK; additional functions ADC_IN4, DAC_OUT1 and COMP1_INP. |
| 30 | PA5 | bidirectional | Standard 3.3 V I/O (TC) with default function PA5; alternate functions SPI1_SCK and TIM2_CH1_ETR; additional functions ADC_IN5, DAC_OUT2 and COMP1_INP. |
| 31 | PA6 | bidirectional | 5 V-tolerant I/O (FT) with default function PA6; alternate functions SPI1_MISO, TIM3_CH1, LCD_SEG3 and TIM10_CH1; additional functions ADC_IN6 and COMP1_INP. |
| 32 | PA7 | bidirectional | 5 V-tolerant I/O (FT) with default function PA7; alternate functions SPI1_MOSI, TIM3_CH2, LCD_SEG4 and TIM11_CH1; additional functions ADC_IN7 and COMP1_INP. |
| 33 | PC4 | bidirectional | 5 V-tolerant I/O (FT) with default function PC4; alternate function LCD_SEG22; additional functions ADC_IN14 and COMP1_INP. |
| 34 | PC5 | bidirectional | 5 V-tolerant I/O (FT) with default function PC5; alternate function LCD_SEG23; additional functions ADC_IN15 and COMP1_INP. |
| 35 | PB0 | bidirectional | Standard 3.3 V I/O (TC) with default function PB0; alternate functions TIM3_CH3 and LCD_SEG5; additional functions ADC_IN8, COMP1_INP, VREF_OUT and VLCDRAIL3. |
| 36 | PB1 | bidirectional | 5 V-tolerant I/O (FT) with default function PB1; alternate functions TIM3_CH4 and LCD_SEG6; additional functions ADC_IN9, COMP1_INP and VREF_OUT. |
| 37 | PB2 | bidirectional | 5 V-tolerant I/O (FT) with default function PB2; alternate function BOOT1; additional function VLCDRAIL1. |
| 38 | PE7 | bidirectional | Standard 3.3 V I/O (TC) with default function PE7; additional functions ADC_IN22 and COMP1_INP. |
| 39 | PE8 | bidirectional | Standard 3.3 V I/O (TC) with default function PE8; additional functions ADC_IN23 and COMP1_INP. |
| 40 | PE9 | bidirectional | Standard 3.3 V I/O (TC) with default function PE9; alternate function TIM2_CH1_ETR; additional functions ADC_IN24 and COMP1_INP. |
| 41 | PE10 | bidirectional | Standard 3.3 V I/O (TC) with default function PE10; alternate function TIM2_CH2; additional functions ADC_IN25 and COMP1_INP. |
| 42 | PE11 | bidirectional | 5 V-tolerant I/O (FT) with default function PE11; alternate function TIM2_CH3; additional function VLCDRAIL2. |
| 43 | PE12 | bidirectional | 5 V-tolerant I/O (FT) with default function PE12; alternate functions TIM2_CH4 and SPI1_NSS; additional function VLCDRAIL3. |
| 44 | PE13 | bidirectional | 5 V-tolerant I/O (FT) with default function PE13; alternate function SPI1_SCK. |
| 45 | PE14 | bidirectional | 5 V-tolerant I/O (FT) with default function PE14; alternate function SPI1_MISO. |
| 46 | PE15 | bidirectional | 5 V-tolerant I/O (FT) with default function PE15; alternate function SPI1_MOSI. |
| 47 | PB10 | bidirectional | 5 V-tolerant I/O (FT) with default function PB10; alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10. |
| 48 | PB11 | bidirectional | 5 V-tolerant I/O (FT) with default function PB11; alternate functions I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11. |
| 49 | VSS_1 | power_in | Ground pin VSS_1 (type S). |
| 50 | VDD_1 | power_in | Supply pin VDD_1 (type S). |
| 51 | PB12 | bidirectional | 5 V-tolerant I/O (FT) with default function PB12; alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12 and TIM10_CH1; additional functions ADC_IN18, COMP1_INP and VLCDRAIL2. |
| 52 | PB13 | bidirectional | 5 V-tolerant I/O (FT) with default function PB13; alternate functions SPI2_SCK, USART3_CTS, LCD_SEG13 and TIM9_CH1; additional functions ADC_IN19 and COMP1_INP. |
| 53 | PB14 | bidirectional | 5 V-tolerant I/O (FT) with default function PB14; alternate functions SPI2_MISO, USART3_RTS, LCD_SEG14 and TIM9_CH2; additional functions ADC_IN20 and COMP1_INP. |
| 54 | PB15 | bidirectional | 5 V-tolerant I/O (FT) with default function PB15; alternate functions SPI2_MOSI, LCD_SEG15 and TIM11_CH1; additional functions ADC_IN21, COMP1_INP and RTC_REFIN. |
| 55 | PD8 | bidirectional | 5 V-tolerant I/O (FT) with default function PD8; alternate functions USART3_TX and LCD_SEG28. |
| 56 | PD9 | bidirectional | 5 V-tolerant I/O (FT) with default function PD9; alternate functions USART3_RX and LCD_SEG29. |
| 57 | PD10 | bidirectional | 5 V-tolerant I/O (FT) with default function PD10; alternate functions USART3_CK and LCD_SEG30. |
| 58 | PD11 | bidirectional | 5 V-tolerant I/O (FT) with default function PD11; alternate functions USART3_CTS and LCD_SEG31. |
| 59 | PD12 | bidirectional | 5 V-tolerant I/O (FT) with default function PD12; alternate functions TIM4_CH1, USART3_RTS and LCD_SEG32. |
| 60 | PD13 | bidirectional | 5 V-tolerant I/O (FT) with default function PD13; alternate functions TIM4_CH2 and LCD_SEG33. |
| 61 | PD14 | bidirectional | 5 V-tolerant I/O (FT) with default function PD14; alternate functions TIM4_CH3 and LCD_SEG34. |
| 62 | PD15 | bidirectional | 5 V-tolerant I/O (FT) with default function PD15; alternate functions TIM4_CH4 and LCD_SEG35. |
| 63 | PC6 | bidirectional | 5 V-tolerant I/O (FT) with default function PC6; alternate functions TIM3_CH1 and LCD_SEG24. |
| 64 | PC7 | bidirectional | 5 V-tolerant I/O (FT) with default function PC7; alternate functions TIM3_CH2 and LCD_SEG25. |
| 65 | PC8 | bidirectional | 5 V-tolerant I/O (FT) with default function PC8; alternate functions TIM3_CH3 and LCD_SEG26. |
| 66 | PC9 | bidirectional | 5 V-tolerant I/O (FT) with default function PC9; alternate functions TIM3_CH4 and LCD_SEG27. |
| 67 | PA8 | bidirectional | 5 V-tolerant I/O (FT) with default function PA8; alternate functions USART1_CK, MCO and LCD_COM0. |
| 68 | PA9 | bidirectional | 5 V-tolerant I/O (FT) with default function PA9; alternate functions USART1_TX and LCD_COM1. |
| 69 | PA10 | bidirectional | 5 V-tolerant I/O (FT) with default function PA10; alternate functions USART1_RX and LCD_COM2. |
| 70 | PA11 | bidirectional | 5 V-tolerant I/O (FT) with default function PA11; alternate functions USART1_CTS and SPI1_MISO; additional function USB_DM. |
| 71 | PA12 | bidirectional | 5 V-tolerant I/O (FT) with default function PA12; alternate functions USART1_RTS and SPI1_MOSI; additional function USB_DP. |
| 72 | PA13 | bidirectional | 5 V-tolerant I/O (FT) with default function JTMS-SWDIO (serial wire debug data input/output). |
| 73 | PH2 | bidirectional | 5 V-tolerant I/O (FT) with default function PH2; no alternate function is listed for this pin. |
| 74 | VSS_2 | power_in | Ground pin VSS_2 (type S). |
| 75 | VDD_2 | power_in | Supply pin VDD_2 (type S). |
| 76 | PA14 | bidirectional | 5 V-tolerant I/O (FT) with default function JTCK-SWCLK (serial wire debug clock). |
| 77 | PA15 | bidirectional | 5 V-tolerant I/O (FT) with default function JTDI; alternate functions TIM2_CH1_ETR, SPI1_NSS and LCD_SEG17. |
| 78 | PC10 | bidirectional | 5 V-tolerant I/O (FT) with default function PC10; alternate functions USART3_TX, LCD_SEG28, LCD_SEG40 and LCD_COM4. |
| 79 | PC11 | bidirectional | 5 V-tolerant I/O (FT) with default function PC11; alternate functions USART3_RX, LCD_SEG29, LCD_SEG41 and LCD_COM5. |
| 80 | PC12 | bidirectional | 5 V-tolerant I/O (FT) with default function PC12; alternate functions USART3_CK, LCD_SEG30, LCD_SEG42 and LCD_COM6. |
| 81 | PD0 | bidirectional | 5 V-tolerant I/O (FT) with default function PD0; alternate functions SPI2_NSS and TIM9_CH1. |
| 82 | PD1 | bidirectional | 5 V-tolerant I/O (FT) with default function PD1; alternate function SPI2_SCK. |
| 83 | PD2 | bidirectional | 5 V-tolerant I/O (FT) with default function PD2; alternate functions TIM3_ETR, LCD_SEG31, LCD_SEG43 and LCD_COM7. |
| 84 | PD3 | bidirectional | 5 V-tolerant I/O (FT) with default function PD3; alternate functions USART2_CTS and SPI2_MISO. |
| 85 | PD4 | bidirectional | 5 V-tolerant I/O (FT) with default function PD4; alternate functions USART2_RTS and SPI2_MOSI. |
| 86 | PD5 | bidirectional | 5 V-tolerant I/O (FT) with default function PD5; alternate function USART2_TX. |
| 87 | PD6 | bidirectional | 5 V-tolerant I/O (FT) with default function PD6; alternate function USART2_RX. |
| 88 | PD7 | bidirectional | 5 V-tolerant I/O (FT) with default function PD7; alternate functions USART2_CK and TIM9_CH2. |
| 89 | PB3 | bidirectional | 5 V-tolerant I/O (FT) with default function JTDO; alternate functions TIM2_CH2, SPI1_SCK and LCD_SEG7; additional function COMP2_INM. |
| 90 | PB4 | bidirectional | 5 V-tolerant I/O (FT) with default function NJTRST; alternate functions TIM3_CH1, SPI1_MISO and LCD_SEG8; additional function COMP2_INP. |
| 91 | PB5 | bidirectional | 5 V-tolerant I/O (FT) with default function PB5; alternate functions I2C1_SMBA, TIM3_CH2, SPI1_MOSI and LCD_SEG9; additional function COMP2_INP. |
| 92 | PB6 | bidirectional | 5 V-tolerant I/O (FT) with default function PB6; alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX. |
| 93 | PB7 | bidirectional | 5 V-tolerant I/O (FT) with default function PB7; alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX; additional function PVD_IN. |
| 94 | BOOT0 | input | Dedicated BOOT0 input pin (type I, input only) that selects the boot mode. |
| 95 | PB8 | bidirectional | 5 V-tolerant I/O (FT) with default function PB8; alternate functions TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1. |
| 96 | PB9 | bidirectional | 5 V-tolerant I/O (FT) with default function PB9; alternate functions TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1. |
| 97 | PE0 | bidirectional | 5 V-tolerant I/O (FT) with default function PE0; alternate functions TIM4_ETR, LCD_SEG36 and TIM10_CH1. |
| 98 | PE1 | bidirectional | 5 V-tolerant I/O (FT) with default function PE1; alternate functions LCD_SEG37 and TIM11_CH1. |
| 99 | VSS_3 | power_in | Ground pin VSS_3 (type S). |
| 100 | VDD_3 | power_in | Supply pin VDD_3 (type S). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA and VDD) | VDD-VSS | -0.3 | | 4 | V | | 55 |
| Input voltage on any other pin | VIN | -0.3 | | 4 | V | | 55 |
| Variations between different VDD power pins | /ΔVDDx/ | | | 50 | mV | | 55 |
| Variations between all different ground pins | /VSSx −VSS/ | | | 50 | mV | | 55 |
| Allowed voltage difference for VREF+ > VDDA | VREF+ −VDDA | | | 0.4 | V | | 55 |
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | | | 100 | mA | | 55 |
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | | | 100 | mA | | 55 |
| Maximum current into each VDD_x power pin (source) | IVDD(PIN) | | | 70 | mA | | 55 |
| Maximum current out of each VSS_x ground pin (sink) | IVSS(PIN) | | | -70 | mA | | 55 |
| Output current sunk by any I/O and control pin | IIO | | | 25 | mA | | 55 |
| Output current sourced by any I/O and control pin | IIO | | | -25 | mA | | 55 |
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | | | 60 | mA | | 55 |
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | | | -60 | mA | | 55 |
| Injected current on five-volt tolerant I/O, RST and B pins | IINJ(PIN) | -5 | | 0 | mA | | 55 |
| Injected current on any other pin | IINJ(PIN) | -5 | | 5 | mA | | 55 |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | | 25 | mA | | 55 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 56 |
| Maximum junction temperature | TJ | | | 150 | °C | | 56 |
| Internal AHB clock frequency | fHCLK | 0 | | 32 | MHz | | 56 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 32 | MHz | | 56 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 32 | MHz | | 56 |
| Standard operating voltage | VDD | 1.65 | | 3.6 | V | BOR detector disabled | 56 |
| Standard operating voltage | VDD | 1.8 | | 3.6 | V | BOR detector enabled, at power on | 56 |
| Analog operating voltage | VDDA | 1.65 | | 3.6 | V | ADC and DAC not used; must be the same voltage as VDD | 56 |
| Analog operating voltage | VDDA | 1.8 | | 3.6 | V | ADC or DAC used | 56 |
| I/O input voltage, FT pins | VIN | -0.3 | | 5.5 | V | 2.0 V ≤ VDD | 56 |
| I/O input voltage, FT pins | VIN | -0.3 | | 5.25 | V | VDD < 2.0 V | 56 |
| I/O input voltage, BOOT0 | VIN | 0 | | 5.5 | V | BOOT0 | 56 |
| I/O input voltage, any other pin | VIN | -0.3 | | | V | | 56 |
| Ambient temperature for 6 suffix version | TA | -40 | | 85 | °C | Maximum power dissipation | 57 |
| Junction temperature range, 6 suffix version | TJ | -40 | | 105 | °C | | 57 |
| Power dissipation, LQFP100 package | PD | | | 435 | mW | TA = 85 °C for suffix 6 | 57 |
| VDD rise time rate | tVDD | 0 | | 1000 | µs/V | BOR detector disabled | 57 |
| VDD fall time rate | tVDD | 0 | | 1000 | µs/V | BOR detector disabled | 57 |
| Reset temporization | TRSTTEMPO | | 2 | 3.3 | ms | VDD rising, BOR enabled | 57 |
| Reset temporization | TRSTTEMPO | 0.4 | 0.7 | 1.6 | ms | VDD rising, BOR disabled | 57 |
| Power on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 57 |
| Power on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 57 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 58 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 58 |
| Brown-out reset threshold 1 | VBOR1 | 1.87 | 1.93 | 1.97 | V | Falling edge | 58 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2.03 | 2.07 | V | Rising edge | 58 |
| Brown-out reset threshold 2 | VBOR2 | 2.22 | 2.3 | 2.35 | V | Falling edge | 58 |
| Brown-out reset threshold 2 | VBOR2 | 2.31 | 2.41 | 2.44 | V | Rising edge | 58 |
| Brown-out reset threshold 3 | VBOR3 | 2.45 | 2.55 | 2.6 | V | Falling edge | 58 |
| Brown-out reset threshold 3 | VBOR3 | 2.54 | 2.66 | 2.7 | V | Rising edge | 58 |
| Brown-out reset threshold 4 | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 58 |
| Brown-out reset threshold 4 | VBOR4 | 2.78 | 2.9 | 2.95 | V | Rising edge | 58 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | −40 °C < TJ < +110 °C | 59 |
| Temperature coefficient | TCoeff | | 25 | 100 | ppm/°C | −40 °C < TJ < +110 °C | 59 |
| Accuracy of the factory-calibrated HSI oscillator | ACCHSI | -4 | | 3 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 105 °C | 77 |
| HSE oscillator frequency | fOSC_IN | 1 | | 24 | MHz | | 73 |
| PLL input clock | fPLL_IN | 2 | | 24 | MHz | | 79 |
| Supply current in Run mode, code executed from Flash | IDD (Run from Flash) | | 8.25 | 9.6 | mA | Range 1, VCORE=1.8 V, VOS[1:0] = 01, fHCLK = 32 MHz | 61 |
| Max allowed current in Low-power run mode | IDD Max (LP Run) | | | 200 | µA | VDD from 1.65 V to 3.6 V | 64 |
| Max allowed current in Low-power sleep mode | IDD Max (LP Sleep) | | | 200 | µA | VDD from 1.65 V to 3.6 V | 65 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | TLEAD Maximum lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK® | 56 |
## CAD (KiCad official)
- Symbol: `STM32L151V8T6A`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `stm32l151v8t6a-etched.step` / `stm32l151v8t6a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l151v8t6a.step` / `stm32l151v8t6a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/content/ccc/resource/technical/document/datasheet/81/27/7d/29/b7/bd/49/f0/DM00078689.pdf/files/DM00078689.pdf/jcr:content/translations/en.DM00078689.pdf) (130 pp, sha256 `e5e0ab791f4e7879`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l151v8t6a-datasheet.pdf)