Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32L151CCT7

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

STM32L151CCT7 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VLCD power_in LCD supply pin; on STM32L151xC devices this pin should be connected to VDD, since the VLCD function applies to STM32L152xC only.
2 PC13 bidirectional 5 V tolerant (FT) I/O with default function PC13; additional functions WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT.
3 PC14 bidirectional Standard 3.3 V (TC) I/O that is OSC32_IN when the LSE oscillator is on, otherwise a GPIO PC14.
4 PC15 bidirectional Standard 3.3 V (TC) I/O that is OSC32_OUT when the LSE oscillator is on, otherwise a GPIO PC15.
5 PH0 bidirectional Standard 3.3 V (TC) I/O that is OSC_IN when the HSE oscillator is on, otherwise a GPIO PH0.
6 PH1 bidirectional Standard 3.3 V (TC) I/O that is OSC_OUT when the HSE oscillator is on, otherwise a GPIO PH1.
7 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor (RST I/O structure).
8 VSSA power_in Analog ground pin that must be connected to VSS.
9 VDDA power_in Analog supply pin, 1.65 V to 3.6 V (minimum 1.8 V when the ADC is used), which must be connected to VDD.
10 PA0 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM2_CH1_ETR, TIM5_CH1 and USART2_CTS; additional functions WKUP1, RTC_TAMP2, ADC_IN0 and COMP1_INP.
11 PA1 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS and LCD_SEG0; additional functions ADC_IN1, COMP1_INP and OPAMP1_VINP.
12 PA2 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX and LCD_SEG1; additional functions ADC_IN2, COMP1_INP and OPAMP1_VINM.
13 PA3 bidirectional Standard 3.3 V (TC) I/O; alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX and LCD_SEG2; additional functions ADC_IN3, COMP1_INP and OPAMP1_VOUT.
14 PA4 bidirectional Standard 3.3 V (TC) I/O; alternate functions SPI1_NSS, SPI3_NSS, I2S3_WS and USART2_CK; additional functions ADC_IN4, DAC_OUT1 and COMP1_INP.
15 PA5 bidirectional Standard 3.3 V (TC) I/O; alternate functions TIM2_CH1_ETR and SPI1_SCK; additional functions ADC_IN5, DAC_OUT2 and COMP1_INP.
16 PA6 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_CH1, TIM10_CH1, SPI1_MISO and LCD_SEG3; additional functions ADC_IN6, COMP1_INP and OPAMP2_VINP.
17 PA7 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_CH2, TIM11_CH1, SPI1_MOSI and LCD_SEG4; additional functions ADC_IN7, COMP1_INP and OPAMP2_VINM.
18 PB0 bidirectional Standard 3.3 V (TC) I/O; alternate functions TIM3_CH3 and LCD_SEG5; additional functions ADC_IN8, COMP1_INP, OPAMP2_VOUT, VLCDRAIL3 and VREF_OUT.
19 PB1 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_CH4 and LCD_SEG6; additional functions ADC_IN9, COMP1_INP and VREF_OUT.
20 PB2 bidirectional 5 V tolerant (FT) I/O that also serves as the BOOT1 pin; additional functions VLCDRAIL1 and ADCIN0b.
21 PB10 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM2_CH3, I2C2_SCL, USART3_TX and LCD_SEG10.
22 PB11 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM2_CH4, I2C2_SDA, USART3_RX and LCD_SEG11.
23 VSS_1 power_in Digital ground pin; the maximum current out of each VSS_x ground pin is -70 mA.
24 VDD_1 power_in Digital supply pin for the I/Os and internal regulator, 1.65 V to 3.6 V; the maximum current into each VDD_x pin is 70 mA.
25 PB12 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM10_CH1, I2C2_SMBA, SPI2_NSS, I2S2_WS, USART3_CK and LCD_SEG12; additional functions ADC_IN18, COMP1_INP and VLCDRAIL2.
26 PB13 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM9_CH1, SPI2_SCK, I2S2_CK, USART3_CTS and LCD_SEG13; additional functions ADC_IN19 and COMP1_INP.
27 PB14 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM9_CH2, SPI2_MISO, USART3_RTS and LCD_SEG14; additional functions ADC_IN20 and COMP1_INP.
28 PB15 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM11_CH1, SPI2_MOSI, I2S2_SD and LCD_SEG15; additional functions ADC_IN21, COMP1_INP and RTC_REFIN.
29 PA8 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_CK, MCO and LCD_COM0.
30 PA9 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_TX and LCD_COM1.
31 PA10 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_RX and LCD_COM2.
32 PA11 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_CTS and SPI1_MISO; additional function USB_DM.
33 PA12 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_RTS and SPI1_MOSI; additional function USB_DP.
34 PA13 bidirectional 5 V tolerant (FT) I/O with default function JTMS-SWDIO (serial wire debug data).
35 VSS_2 power_in Digital ground pin; the maximum current out of each VSS_x ground pin is -70 mA.
36 VDD_2 power_in Digital supply pin, 1.65 V to 3.6 V; the maximum current into each VDD_x pin is 70 mA.
37 PA14 bidirectional 5 V tolerant (FT) I/O with default function JTCK-SWCLK (serial wire debug clock).
38 PA15 bidirectional 5 V tolerant (FT) I/O with default function JTDI; alternate functions TIM2_CH1_ETR, SPI1_NSS, SPI3_NSS, I2S3_WS and LCD_SEG17.
39 PB3 bidirectional 5 V tolerant (FT) I/O with default function JTDO; alternate functions TIM2_CH2, SPI1_SCK, SPI3_SCK, I2S3_CK and LCD_SEG7; additional function COMP2_INM.
40 PB4 bidirectional 5 V tolerant (FT) I/O with default function NJTRST; alternate functions TIM3_CH1, SPI1_MISO, SPI3_MISO and LCD_SEG8; additional function COMP2_INP.
41 PB5 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, I2S3_SD and LCD_SEG9; additional function COMP2_INP.
42 PB6 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM4_CH1, I2C1_SCL and USART1_TX; additional function COMP2_INP.
43 PB7 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM4_CH2, I2C1_SDA and USART1_RX; additional functions COMP2_INP and PVD_IN.
44 BOOT0 input Dedicated BOOT0 input that selects the boot mode at startup.
45 PB8 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM4_CH3, TIM10_CH1, I2C1_SCL and LCD_SEG16.
46 PB9 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM4_CH4, TIM11_CH1, I2C1_SDA and LCD_COM3.
47 VSS_3 power_in Digital ground pin; the maximum current out of each VSS_x ground pin is -70 mA.
48 VDD_3 power_in Digital supply pin, 1.65 V to 3.6 V; the maximum current into each VDD_x pin is 70 mA.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA and VDD) VDD-VSS -0.3 4 V Including VDDA and VDD 55
Input voltage on any other pin VIN -0.3 4 V Any other pin (not five-volt tolerant) 55
Variations between different VDD power pins /ΔVDDx/ 50 mV 55
Variations between all different ground pins /VSSx −VSS/ 50 mV Include VREF- pin 55
Allowed voltage difference for VREF+ > VDDA VREF+ -VDDA 0.4 V VREF+ > VDDA 55
Total current into sum of all VDD_x power lines (source) IVDD(Σ) 100 mA 55
Total current out of sum of all VSS_x ground lines (sink) IVSS(Σ) 100 mA 55
Maximum current into each VDD_x power pin (source) IVDD(PIN) 70 mA 55
Maximum current out of each VSS_x ground pin (sink) IVSS(PIN) -70 mA 55
Output current sunk by any I/O and control pin IIO 25 mA 55
Output current sourced by any I/O and control pin IIO -25 mA 55
Total output current sunk by sum of all IOs and control pins ΣIIO(PIN) 60 mA 55
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -60 mA 55
Injected current on five-volt tolerant I/O, RST and B pins IINJ(PIN) -5 0 mA Five-volt tolerant I/O, RST and B pins 55
Injected current on any other pin IINJ(PIN) -5 5 mA Any other pin 55
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA Sum of all I/O and control pins 55
Storage temperature range TSTG -65 150 °C 56
Maximum junction temperature TJ 150 °C 56
Internal AHB clock frequency fHCLK 0 32 MHz 56
Internal APB1 clock frequency fPCLK1 0 32 MHz 56
Internal APB2 clock frequency fPCLK2 0 32 MHz 56
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 56
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power on 56
Analog operating voltage (ADC and DAC not used) VDDA 1.65 3.6 V Must be the same voltage as VDD 56
Analog operating voltage (ADC or DAC used) VDDA 1.8 3.6 V ADC or DAC used 56
I/O input voltage, FT pins VIN -0.3 5.5 V 2.0 V ≤ VDD 56
I/O input voltage, FT pins VIN -0.3 5.25 V VDD < 2.0 V 56
I/O input voltage, BOOT0 pin VIN 0 5.5 V BOOT0 pin 56
Power dissipation, LQFP48 package PD 364 mW TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 56
Ambient temperature for 7 suffix version TA -40 105 °C Maximum power dissipation 57
Junction temperature range, 7 suffix version TJ -40 110 °C 7 suffix version 57
VDD rise time rate tVDD 0 1000 µs/V BOR detector disabled 57
VDD fall time rate tVDD 0 1000 µs/V BOR detector disabled 57
Reset temporization TRSTTEMPO 2 3.3 ms VDD rising, BOR enabled 57
Reset temporization TRSTTEMPO 0.4 0.7 1.6 ms VDD rising, BOR disabled (valid for device version without BOR at power up) 57
Power on/power down reset threshold VPOR/PDR 1 1.5 1.65 V Falling edge 57
Power on/power down reset threshold VPOR/PDR 1.3 1.5 1.65 V Rising edge 57
Brown-out reset threshold 0 VBOR0 1.67 1.7 1.74 V Falling edge 57
Brown-out reset threshold 0 VBOR0 1.69 1.76 1.8 V Rising edge 57
Brown-out reset threshold 1 VBOR1 1.87 1.93 1.97 V Falling edge 57
Brown-out reset threshold 1 VBOR1 1.96 2.03 2.07 V Rising edge 57
Brown-out reset threshold 2 VBOR2 2.22 2.3 2.35 V Falling edge 57
Brown-out reset threshold 2 VBOR2 2.31 2.41 2.44 V Rising edge 57
Brown-out reset threshold 3 VBOR3 2.45 2.55 2.6 V Falling edge 58
Brown-out reset threshold 3 VBOR3 2.54 2.66 2.7 V Rising edge 58
Brown-out reset threshold 4 VBOR4 2.68 2.8 2.85 V Falling edge 58
Brown-out reset threshold 4 VBOR4 2.78 2.9 2.95 V Rising edge 58
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +110 °C 59
Internal reference current consumption IREFINT 1.4 2.3 µA 59
Internal reference startup time TVREFINT 2 3 ms 59
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +110 °C 59
Voltage coefficient VDDCoeff 2000 ppm/V 3.0 V < VDDA < 3.6 V 59
Long-term stability ACoeff 1000 ppm 1000 hours, T= 25 °C 59
Supply current in Stop mode (RTC disabled), regulator LP, LSI, HSI and HSE OFF IDD (Stop) 0.435 1 µA TA = -40°C to 25°C, no independent watchdog 67
Supply current in Standby mode (RTC disabled), independent watchdog and LSI OFF IDD (Standby) 0.29 0.6 µA TA = -40 °C to 25 °C 68
Supply current in Standby mode (RTC disabled), independent watchdog and LSI OFF IDD (Standby) 1.45 7 µA TA = 105 °C 68
Max allowed current in Low-power run mode IDD max (LP Run) 200 µA VDD from 1.65 V to 3.6 V 64
Supply current in Run mode, code executed from Flash IDD (Run from Flash) 8.25 9.4 mA Range 1, VCORE=1.8 V, VOS[1:0] = 01, fHCLK 32 MHz 61
Supply current in Run mode, code executed from RAM, Flash switched off IDD (Run from RAM) 7.15 8.3 mA Range 1, VCORE=1.8 V, VOS[1:0] = 01, fHCLK 32 MHz 62

CAD (KiCad official)

  • Symbol: STM32L151CCT7
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32l151cct7-etched.step / stm32l151cct7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l151cct7.step / stm32l151cct7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (136 pp, sha256 5e6d5674cd06c108, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF