main
History Download
Ray Publish 0.1.0 0b89dc4

STM32L073CZT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

STM32L073CZT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VLCD power_in LCD supply pin for the internal step-up converter or an external LCD voltage (up to 3.6 V), decoupled with a Cext of 0.1 to 2 µF.
2 PC13 bidirectional 5 V tolerant GPIO (FT) with additional functions RTC_TAMP1/RTC_TS/RTC_OUT and WKUP2.
3 PC14-OSC32_IN bidirectional 5 V tolerant GPIO (FT) that serves as the LSE 32.768 kHz oscillator input OSC32_IN.
4 PC15-OSC32_OUT bidirectional Standard 3.3 V I/O (TC) that serves as the LSE 32.768 kHz oscillator output OSC32_OUT.
5 PH0-OSC_IN bidirectional Standard 3.3 V I/O (TC) that serves as the HSE 1 to 25 MHz oscillator input OSC_IN, with alternate function USB_CRS_SYNC.
6 PH1-OSC_OUT bidirectional Standard 3.3 V I/O (TC) that serves as the HSE oscillator output OSC_OUT.
7 NRST bidirectional Active-low bidirectional reset pin with embedded weak pull-up (RPU 25 to 65 kΩ), with VIL(NRST) max 0.8 V.
8 VSSA power_in Analog ground for ADC, RCs and PLL, which must be connected to VSS.
9 VDDA power_in Analog supply for ADC, RCs and PLL, 1.65 to 3.6 V (1.8 to 3.6 V with all analog features), which must be the same voltage as VDD.
10 PA0 bidirectional Standard 3.3 V I/O (TC) with alternate functions TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT, and additional functions ADC_IN0, COMP1_INM and RTC_TAMP2/WKUP1.
11 PA1 bidirectional 5 V tolerant I/O (FT) with alternate functions EVENTOUT, LCD_SEG0, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX, and additional functions COMP1_INP and ADC_IN1.
12 PA2 bidirectional 5 V tolerant I/O (FT) with alternate functions TIM21_CH1, LCD_SEG1, TIM2_CH3, TSC_G1_IO3, USART2_TX, LPUART1_TX and COMP2_OUT, and additional functions COMP2_INM and ADC_IN2.
13 PA3 bidirectional 5 V tolerant I/O (FT) with alternate functions TIM21_CH2, LCD_SEG2, TIM2_CH4, TSC_G1_IO4, USART2_RX and LPUART1_RX, and additional functions COMP2_INP and ADC_IN3.
14 PA4 bidirectional Standard 3.3 V I/O (TC) with reduced touch sensing sensitivity, recommended for use as a sampling capacitor I/O, with alternate functions SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR, and additional functions COMP1_INM, COMP2_INM, ADC_IN4 and DAC_OUT1.
15 PA5 bidirectional Standard 3.3 V I/O (TC) with alternate functions SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1, and additional functions COMP1_INM, COMP2_INM, ADC_IN5 and DAC_OUT2.
16 PA6 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_MISO, LCD_SEG3, TIM3_CH1, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and additional function ADC_IN6.
17 PA7 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_MOSI, LCD_SEG4, TIM3_CH2, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT, and additional function ADC_IN7.
18 PB0 bidirectional 5 V tolerant I/O (FT) with alternate functions EVENTOUT, LCD_SEG5, TIM3_CH3 and TSC_G3_IO2, and additional functions LCD_VLCD3, ADC_IN8 and VREF_OUT.
19 PB1 bidirectional 5 V tolerant I/O (FT) with alternate functions LCD_SEG6, TIM3_CH4, TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE, and additional functions ADC_IN9 and VREF_OUT.
20 PB2 bidirectional 5 V tolerant I/O (FT) with alternate functions LPTIM1_OUT, TSC_G3_IO4 and I2C3_SMBA, and additional function LCD_VLCD2.
21 PB10 bidirectional 5 V tolerant I/O (FT) with alternate functions LCD_SEG10, TIM2_CH3, TSC_SYNC, LPUART1_TX, SPI2_SCK, I2C2_SCL and LPUART1_RX.
22 PB11 bidirectional 5 V tolerant I/O (FT) with alternate functions EVENTOUT, LCD_SEG11, TIM2_CH4, TSC_G6_IO1, LPUART1_RX, I2C2_SDA and LPUART1_TX.
23 VSS power_in Ground pin, which must be connected to the board ground together with the other VSS pins.
24 VDD power_in Digital supply for I/Os and the internal regulator, 1.65 to 3.6 V (1.8 to 3.6 V with BOR enabled).
25 PB12 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI2_NSS/I2S2_WS, LCD_SEG12, LPUART1_RTS/LPUART1_DE, TSC_G6_IO2, I2C2_SMBA and EVENTOUT, and additional function LCD_VLCD1.
26 PB13 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions SPI2_SCK/I2S2_CK, LCD_SEG13, MCO, TSC_G6_IO3, LPUART1_CTS, I2C2_SCL and TIM21_CH1.
27 PB14 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions SPI2_MISO/I2S2_MCK, LCD_SEG14, RTC_OUT, TSC_G6_IO4, LPUART1_RTS/LPUART1_DE, I2C2_SDA and TIM21_CH2.
28 PB15 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI2_MOSI/I2S2_SD, LCD_SEG15 and RTC_REFIN.
29 PA8 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions MCO, LCD_COM0, USB_CRS_SYNC, EVENTOUT, USART1_CK and I2C3_SCL.
30 PA9 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions MCO, LCD_COM1, TSC_G4_IO1, USART1_TX, I2C1_SCL and I2C3_SMBA.
31 PA10 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions LCD_COM2, TSC_G4_IO2, USART1_RX and I2C1_SDA.
32 PA11 bidirectional 5 V tolerant I/O (FT) powered from VDD_USB, with alternate functions SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT, and additional function USB_DM.
33 PA12 bidirectional 5 V tolerant I/O (FT) powered from VDD_USB, with alternate functions SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT, and additional function USB_DP.
34 PA13 bidirectional 5 V tolerant I/O (FT) with alternate functions SWDIO, USB_NOE and LPUART1_RX.
35 VSS power_in Ground pin, which must be connected to the board ground together with the other VSS pins.
36 VDD_USB power_in USB transceiver supply for PA11 and PA12, which must be above 3.0 V when USB is used, otherwise tied to VDD or VSS.
37 PA14 bidirectional 5 V tolerant I/O (FT) with alternate functions SWCLK, USART2_TX and LPUART1_TX.
38 PA15 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_NSS, LCD_SEG17, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE.
39 PB3 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_SCK, LCD_SEG7, TIM2_CH2, TSC_G5_IO1, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX, and additional function COMP2_INM.
40 PB4 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions SPI1_MISO, LCD_SEG8, TIM3_CH1, TSC_G5_IO2, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA, and additional function COMP2_INP.
41 PB5 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_MOSI, LCD_SEG9, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE, and additional function COMP2_INP.
42 PB6 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3, and additional function COMP2_INP.
43 PB7 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2, TSC_G5_IO4 and USART4_CTS, and additional functions COMP2_INP and PVD_IN.
44 BOOT0 input Input-only boot pin sampled at startup together with the nBOOT1 option bit to select Flash, System memory or embedded RAM boot, with an input range of 0 to 5.5 V.
45 PB8 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions LCD_SEG16, TSC_SYNC and I2C1_SCL.
46 PB9 bidirectional 5 V tolerant I/O with Fm+ capability (FTf) with alternate functions LCD_COM3, EVENTOUT, I2C1_SDA and SPI2_NSS/I2S2_WS.
47 VSS power_in Ground pin, which must be connected to the board ground together with the other VSS pins.
48 VDD power_in Digital supply for I/Os and the internal regulator, 1.65 to 3.6 V (1.8 to 3.6 V with BOR enabled).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VDD_USB, VDD) VDD-VSS -0.3 4 V 67
Input voltage on TC pins VIN 4 V Input voltage on TC pin 67
Input voltage on any other pin VIN 4 V Input voltage on any other pin 67
Variations between different VDDx power pins /ΔVDD/ 50 mV 67
Variations between any VDDx and VDDA power pins /VDDA-VDDx/ 300 mV 67
Variations between all different ground pins including VREF- pin /ΔVSS/ 50 mV 67
Allowed voltage difference for VREF+ > VDDA VREF+ -VDDA 0.4 V 67
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA 68
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA 68
Total current into VDD_USB power lines (source) ΣIVDD_USB 25 mA 68
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 68
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 68
Output current sunk by any I/O and control pin except FTf pins IIO 16 mA 68
Output current sunk by FTf pins IIO 22 mA 68
Output current sourced by any I/O and control pin IIO -16 mA 68
Total output current sunk by sum of all IOs and control pins except PA11 and PA12 ΣIIO(PIN) 90 mA 68
Total output current sunk by PA11 and PA12 ΣIIO(PIN) 25 mA PA11 and PA12 68
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -90 mA 68
Injected current on FT, FTf, RST and B pins IINJ(PIN) -5 0 mA 68
Injected current on TC pin IINJ(PIN) -5 5 mA 68
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 68
Storage temperature range TSTG -65 150 °C 68
Maximum junction temperature TJ 150 °C 68
Internal AHB clock frequency fHCLK 0 32 MHz 69
Internal APB1 clock frequency fPCLK1 0 32 MHz 69
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 69
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power-on 69
Analog operating voltage (DAC not used) VDDA 1.65 3.6 V DAC not used; must be the same voltage as VDD 69
Analog operating voltage (all features) VDDA 1.8 3.6 V All features; must be the same voltage as VDD 69
Standard operating voltage, USB domain VDD_USB 3 3.6 V USB peripheral used 69
Standard operating voltage, USB domain VDD_USB 0 3.6 V USB peripheral not used 69
Input voltage on FT, FTf and RST pins VIN -0.3 5.5 V 2.0 V ≤ VDD ≤ 3.6 V 69
Input voltage on FT, FTf and RST pins VIN -0.3 5.2 V 1.65 V ≤ VDD ≤ 2.0 V 69
Input voltage on BOOT0 pin VIN 0 5.5 V 69
Power dissipation LQFP48 at TA = 85 °C PD 370 mW TA = 85 °C (range 6) or TA = 105 °C (range 7) 69
Power dissipation LQFP48 at TA = 125 °C PD 93 mW TA = 125 °C (range 3) 69
Temperature range (range 6) TA -40 85 °C Maximum power dissipation (range 6) 70
Junction temperature range (range 6) TJ -40 105 °C -40 °C ≤ TA ≤ 85 °C 70
Power-on/power down reset threshold VPOR/PDR 1 1.5 1.65 V Falling edge 71
Power-on/power down reset threshold VPOR/PDR 1.3 1.5 1.65 V Rising edge 71
Brown-out reset threshold 0 VBOR0 1.67 1.7 1.74 V Falling edge 71
Brown-out reset threshold 0 VBOR0 1.69 1.76 1.8 V Rising edge 71
Brown-out reset threshold 1 VBOR1 1.87 1.93 1.97 V Falling edge 71
Brown-out reset threshold 1 VBOR1 1.96 2.03 2.07 V Rising edge 71
Brown-out reset threshold 2 VBOR2 2.22 2.3 2.35 V Falling edge 71
Brown-out reset threshold 2 VBOR2 2.31 2.41 2.44 V Rising edge 71
Brown-out reset threshold 3 VBOR3 2.45 2.55 2.6 V Falling edge 71
Brown-out reset threshold 3 VBOR3 2.54 2.66 2.7 V Rising edge 71
Brown-out reset threshold 4 VBOR4 2.68 2.8 2.85 V Falling edge 71
Brown-out reset threshold 4 VBOR4 2.78 2.9 2.95 V Rising edge 71
Reset temporization TRSTTEMPO 2 3.3 ms VDD rising, BOR enabled 71
Reset temporization TRSTTEMPO 0.4 0.7 1.6 ms VDD rising, BOR disabled 71
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +125 °C 72
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +125 °C 72
High-speed external user clock source frequency fHSE_ext 1 8 32 MHz CSS is ON or PLL is used 88
Low-speed external user clock source frequency fLSE_ext 1 32.768 1000 kHz 89

CAD (KiCad official)

  • Symbol: STM32L073CZT6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32l073czt6-etched.step / stm32l073czt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l073czt6.step / stm32l073czt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (157 pp, sha256 d574d5fba68fb5bd, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF