component
STM32L071KZT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32L071KZT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)
STM32L071KZT6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main digital power supply; the datasheet gives a 1.65 V to 3.6 V supply range for the device. |
| 2 | PC14-OSC32_IN | bidirectional | Five-volt tolerant (FT) general-purpose I/O, also serving as OSC32_IN for the 32.768 kHz LSE crystal. |
| 3 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC), also serving as OSC32_OUT for the 32.768 kHz LSE crystal. |
| 4 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Analog power supply for the ADC, comparators and internal reference; the revision history gives a VDDA minimum of 1.65 V. |
| 6 | PA0 | bidirectional | I/O with TTa structure; alternate functions include TIM2_CH1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT, and additional functions include ADC_IN0, COMP1_INM and RTC_TAMP2/WKUP1. |
| 7 | PA1 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include EVENTOUT, TIM2_CH2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX, and additional functions include ADC_IN1 and COMP1_INP. |
| 8 | PA2 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX and COMP2_OUT, and additional functions include ADC_IN2 and COMP2_INM. |
| 9 | PA3 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include TIM21_CH2, TIM2_CH4, USART2_RX and LPUART1_RX, and additional functions include ADC_IN3 and COMP2_INP. |
| 10 | PA4 | bidirectional | Standard 3.3 V I/O (TC); alternate functions include SPI1_NSS, USART2_CK and TIM22_ETR, and additional functions include ADC_IN4, COMP1_INM and COMP2_INM. |
| 11 | PA5 | bidirectional | Standard 3.3 V I/O (TC); alternate functions include SPI1_SCK, TIM2_ETR and TIM2_CH1, and additional functions include ADC_IN5, COMP1_INM and COMP2_INM. |
| 12 | PA6 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include SPI1_MISO, TIM3_CH1, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and additional function ADC_IN6. |
| 13 | PA7 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include SPI1_MOSI, TIM3_CH2, TIM22_CH2, EVENTOUT and COMP2_OUT, and additional function ADC_IN7. |
| 14 | PB0 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include EVENTOUT and TIM3_CH3, and additional functions include ADC_IN8 and VREF_OUT. |
| 15 | PB1 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include TIM3_CH4 and LPUART1_RTS/LPUART1_DE, and additional functions include ADC_IN9 and VREF_OUT. |
| 16 | VSS | power_in | Ground reference pin; all voltages in the datasheet are referenced to VSS. |
| 17 | VDD | power_in | Main digital power supply; the datasheet gives a 1.65 V to 3.6 V supply range for the device. |
| 18 | PA8 | bidirectional | Five-volt tolerant (FTf, Fast Mode Plus capable) I/O; alternate functions include MCO, EVENTOUT, USART1_CK and I2C3_SCL. |
| 19 | PA9 | bidirectional | Five-volt tolerant (FTf, Fast Mode Plus capable) I/O; alternate functions include MCO, USART1_TX, I2C1_SCL and I2C3_SMBA. |
| 20 | PA10 | bidirectional | Five-volt tolerant (FTf, Fast Mode Plus capable) I/O; alternate functions include USART1_RX and I2C1_SDA. |
| 21 | PA11 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT. |
| 22 | PA12 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE and COMP2_OUT. |
| 23 | PA13 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include SWDIO (serial wire debug data) and LPUART1_RX. |
| 24 | PA14 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include SWCLK (serial wire debug clock), USART2_TX and LPUART1_TX. |
| 25 | PA15 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE. |
| 26 | PB3 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include SPI1_SCK, TIM2_CH2, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX, and additional function COMP2_INM. |
| 27 | PB4 | bidirectional | Five-volt tolerant (FTf, Fast Mode Plus capable) I/O; alternate functions include SPI1_MISO, TIM3_CH1, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA, and additional function COMP2_INP. |
| 28 | PB5 | bidirectional | Five-volt tolerant (FT) I/O; alternate functions include SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE, and additional function COMP2_INP. |
| 29 | PB6 | bidirectional | Five-volt tolerant (FTf, Fast Mode Plus capable) I/O; alternate functions include USART1_TX, I2C1_SCL and LPTIM1_ETR, and additional function COMP2_INP. |
| 30 | PB7 | bidirectional | Five-volt tolerant (FTf, Fast Mode Plus capable) I/O; alternate functions include USART1_RX, I2C1_SDA, LPTIM1_IN2 and USART4_CTS, and additional functions COMP2_INP and VREF_PVD_IN. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin used for boot mode selection. |
| 32 | VSS | power_in | Ground reference pin; all voltages in the datasheet are referenced to VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
CAD (KiCad official)
- Symbol:
STM32L071KZT6 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l071kzt6-etched.step/stm32l071kzt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l071kzt6.step/stm32l071kzt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (148 pp, sha256
e1c4c9ce19ae345c, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).