main
Ray
Publish 0.1.0
c197c87
STM32L071KBT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)
STM32L071KBT6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main power supply for the I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) I/O that also serves as the OSC32_IN input of the 32.768 kHz LSE oscillator. |
| 3 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O that also serves as the OSC32_OUT output of the 32.768 kHz LSE oscillator. |
| 4 | NRST | bidirectional | Reset pin with an embedded weak pull-up of 25 to 65 kΩ; input low level is at most 0.8 V and input high level is at least 1.4 V. |
| 5 | VDDA | power_in | Analog supply for the ADC, RC oscillators and PLL, which must be the same voltage as VDD (1.65 V to 3.6 V) and connected to it. |
| 6 | PA0 | bidirectional | TTa I/O with alternate functions TIM2_CH1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT, and additional functions COMP1_INM, ADC_IN0 and RTC_TAMP2/WKUP1. |
| 7 | PA1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT, TIM2_CH2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX, and additional functions COMP1_INP and ADC_IN1. |
| 8 | PA2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX and COMP2_OUT, and additional functions COMP2_INM and ADC_IN2. |
| 9 | PA3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM21_CH2, TIM2_CH4, USART2_RX and LPUART1_RX, and additional functions COMP2_INP and ADC_IN3. |
| 10 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_NSS, USART2_CK and TIM22_ETR, and additional functions COMP1_INM, COMP2_INM and ADC_IN4. |
| 11 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_SCK, TIM2_ETR and TIM2_CH1, and additional functions COMP1_INM, COMP2_INM and ADC_IN5. |
| 12 | PA6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, TIM3_CH1, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and additional function ADC_IN6. |
| 13 | PA7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, TIM3_CH2, TIM22_CH2, EVENTOUT and COMP2_OUT, and additional function ADC_IN7. |
| 14 | PB0 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT and TIM3_CH3, and additional functions ADC_IN8 and VREF_OUT. |
| 15 | PB1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_CH4 and LPUART1_RTS/LPUART1_DE, and additional functions ADC_IN9 and VREF_OUT. |
| 16 | VSS | power_in | Ground pin, which must be connected to the board ground together with the other VSS pins. |
| 17 | VDD | power_in | Main power supply for the I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 18 | PA8 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions MCO, EVENTOUT, USART1_CK and I2C3_SCL. |
| 19 | PA9 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions MCO, USART1_TX, I2C1_SCL and I2C3_SMBA. |
| 20 | PA10 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions USART1_RX and I2C1_SDA. |
| 21 | PA11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT. |
| 22 | PA12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE and COMP2_OUT. |
| 23 | PA13 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SWDIO (serial-wire debug data) and LPUART1_RX. |
| 24 | PA14 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SWCLK (serial-wire debug clock), USART2_TX and LPUART1_TX. |
| 25 | PA15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE. |
| 26 | PB3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_SCK, TIM2_CH2, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX, and additional function COMP2_INM. |
| 27 | PB4 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions SPI1_MISO, TIM3_CH1, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA, and additional function COMP2_INP. |
| 28 | PB5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE, and additional function COMP2_INP. |
| 29 | PB6 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions USART1_TX, I2C1_SCL and LPTIM1_ETR, and additional function COMP2_INP. |
| 30 | PB7 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2 and USART4_CTS, and additional functions COMP2_INP and VREF_PVD_IN. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin that selects the boot mode together with the nBOOT1 option bit at startup, with an input voltage range of 0 to 5.5 V. |
| 32 | VSS | power_in | Ground pin, which must be connected to the board ground together with the other VSS pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDDIO2, VDD) | VDD-VSS | -0.3 | 4 | V | 58 | ||
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 58 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | 58 | |||
| Variations between all different ground pins including VREF- pin | /ΔVSS/ | 50 | mV | 58 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ -VDDA | 0.4 | V | 58 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 59 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 59 | |||
| Total current into VDDIO2 power line (source) | ΣIVDDIO2 | 25 | mA | 59 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 59 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 59 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | 59 | |||
| Output current sunk by FTf pins | IIO | 22 | mA | 59 | |||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | 59 | |||
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | 90 | mA | 59 | |||
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | 25 | mA | 59 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | 59 | |||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | 59 | ||
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | 59 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 59 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 59 | ||
| Maximum junction temperature | TJ | 150 | °C | 59 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 60 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 60 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 60 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 60 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 60 | |
| Analog operating voltage (all features) | VDDA | 1.65 | 3.6 | V | Must be the same voltage as VDD | 60 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 60 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 60 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 60 | ||
| Power dissipation (LQFP32 package) | PD | 333 | mW | TA = 85 °C (range 6) or TA = 105 °C (range 7) | 61 | ||
| Power dissipation (LQFP32 package) | PD | 83 | mW | TA = 125 °C (range 3) | 61 | ||
| Temperature range, maximum power dissipation (range 3) | TA | -40 | 125 | °C | 61 | ||
| Junction temperature range (range 3) | TJ | -40 | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 61 | |
| Power-on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 62 |
| Power-on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 62 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 62 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 62 |
| Brown-out reset threshold 4 | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 62 |
| Brown-out reset threshold 4 | VBOR4 | 2.78 | 2.9 | 2.95 | V | Rising edge | 62 |
| Reset temporization | TRSTTEMPO | 2 | 3.3 | ms | VDD rising, BOR enabled | 62 | |
| Reset temporization | TRSTTEMPO | 0.4 | 0.7 | 1.6 | ms | VDD rising, BOR disabled | 62 |
| VDD rise time rate | tVDD | 0 | 1000 | µs/V | BOR detector disabled | 62 | |
| VDD fall time rate | 0 | 1000 | µs/V | BOR detector disabled | 62 | ||
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 63 |
| Internal reference startup time | TVREFINT | 2 | 3 | ms | 63 | ||
| VDDA and VREF+ voltage during VREFINT factory measure | VVREF_MEAS | 2.99 | 3 | 3.01 | V | 63 | |
| Accuracy of factory-measured VREFINT value | AVREF_MEAS | -5 | 5 | mV | Including uncertainties due to ADC and VDDA/VREF+ values | 63 | |
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 63 | |
| Voltage coefficient | VDDCoeff | 2000 | ppm/V | 3.0 V < VDDA < 3.6 V | 63 | ||
| Consumption of reference voltage buffer for ADC | IBUF_ADC | 13.5 | 25 | µA | 63 | ||
| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % VREFINT | 64 | |
| Supply current in Standby mode | IDD (Standby) | 2.6 | 7 | µA | Independent watchdog and LSI OFF, TA = 125 °C | 73 | |
| User external clock source frequency | fHSE_ext | 1 | 8 | 32 | MHz | CSS is ON or PLL is used | 79 |
| Oscillator frequency | fOSC_IN | 1 | 25 | MHz | 81 |
CAD (KiCad official)
- Symbol:
STM32L071KBT6 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l071kbt6-etched.step/stm32l071kbt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l071kbt6.step/stm32l071kbt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (148 pp, sha256
f413c7ce36b98e6c, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L071KBT6
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)
STM32L071KBT6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main power supply for the I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) I/O that also serves as the OSC32_IN input of the 32.768 kHz LSE oscillator. |
| 3 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O that also serves as the OSC32_OUT output of the 32.768 kHz LSE oscillator. |
| 4 | NRST | bidirectional | Reset pin with an embedded weak pull-up of 25 to 65 kΩ; input low level is at most 0.8 V and input high level is at least 1.4 V. |
| 5 | VDDA | power_in | Analog supply for the ADC, RC oscillators and PLL, which must be the same voltage as VDD (1.65 V to 3.6 V) and connected to it. |
| 6 | PA0 | bidirectional | TTa I/O with alternate functions TIM2_CH1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT, and additional functions COMP1_INM, ADC_IN0 and RTC_TAMP2/WKUP1. |
| 7 | PA1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT, TIM2_CH2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX, and additional functions COMP1_INP and ADC_IN1. |
| 8 | PA2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX and COMP2_OUT, and additional functions COMP2_INM and ADC_IN2. |
| 9 | PA3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM21_CH2, TIM2_CH4, USART2_RX and LPUART1_RX, and additional functions COMP2_INP and ADC_IN3. |
| 10 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_NSS, USART2_CK and TIM22_ETR, and additional functions COMP1_INM, COMP2_INM and ADC_IN4. |
| 11 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_SCK, TIM2_ETR and TIM2_CH1, and additional functions COMP1_INM, COMP2_INM and ADC_IN5. |
| 12 | PA6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, TIM3_CH1, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and additional function ADC_IN6. |
| 13 | PA7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, TIM3_CH2, TIM22_CH2, EVENTOUT and COMP2_OUT, and additional function ADC_IN7. |
| 14 | PB0 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT and TIM3_CH3, and additional functions ADC_IN8 and VREF_OUT. |
| 15 | PB1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_CH4 and LPUART1_RTS/LPUART1_DE, and additional functions ADC_IN9 and VREF_OUT. |
| 16 | VSS | power_in | Ground pin, which must be connected to the board ground together with the other VSS pins. |
| 17 | VDD | power_in | Main power supply for the I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 18 | PA8 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions MCO, EVENTOUT, USART1_CK and I2C3_SCL. |
| 19 | PA9 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions MCO, USART1_TX, I2C1_SCL and I2C3_SMBA. |
| 20 | PA10 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions USART1_RX and I2C1_SDA. |
| 21 | PA11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT. |
| 22 | PA12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE and COMP2_OUT. |
| 23 | PA13 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SWDIO (serial-wire debug data) and LPUART1_RX. |
| 24 | PA14 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SWCLK (serial-wire debug clock), USART2_TX and LPUART1_TX. |
| 25 | PA15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE. |
| 26 | PB3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_SCK, TIM2_CH2, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX, and additional function COMP2_INM. |
| 27 | PB4 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions SPI1_MISO, TIM3_CH1, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA, and additional function COMP2_INP. |
| 28 | PB5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE, and additional function COMP2_INP. |
| 29 | PB6 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions USART1_TX, I2C1_SCL and LPTIM1_ETR, and additional function COMP2_INP. |
| 30 | PB7 | bidirectional | 5 V tolerant, Fm+ capable (FTf) I/O with alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2 and USART4_CTS, and additional functions COMP2_INP and VREF_PVD_IN. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin that selects the boot mode together with the nBOOT1 option bit at startup, with an input voltage range of 0 to 5.5 V. |
| 32 | VSS | power_in | Ground pin, which must be connected to the board ground together with the other VSS pins. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDDIO2, VDD) | VDD-VSS | -0.3 | | 4 | V | | 58 |
| Variations between different VDDx power pins | /ΔVDD/ | | | 50 | mV | | 58 |
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | | | 300 | mV | | 58 |
| Variations between all different ground pins including VREF- pin | /ΔVSS/ | | | 50 | mV | | 58 |
| Allowed voltage difference for VREF+ > VDDA | VREF+ -VDDA | | | 0.4 | V | | 58 |
| Total current into sum of all VDD power lines (source) | ΣIVDD | | | 105 | mA | | 59 |
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | | | 105 | mA | | 59 |
| Total current into VDDIO2 power line (source) | ΣIVDDIO2 | | | 25 | mA | | 59 |
| Maximum current into each VDD power pin (source) | IVDD(PIN) | | | 100 | mA | | 59 |
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | | | 100 | mA | | 59 |
| Output current sunk by any I/O and control pin except FTf pins | IIO | | | 16 | mA | | 59 |
| Output current sunk by FTf pins | IIO | | | 22 | mA | | 59 |
| Output current sourced by any I/O and control pin | IIO | | | -16 | mA | | 59 |
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | | | 90 | mA | | 59 |
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | | | 25 | mA | | 59 |
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | | | -90 | mA | | 59 |
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | | 0 | mA | | 59 |
| Injected current on TC pin | IINJ(PIN) | -5 | | 5 | mA | | 59 |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | | 25 | mA | | 59 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 59 |
| Maximum junction temperature | TJ | | | 150 | °C | | 59 |
| Internal AHB clock frequency | fHCLK | 0 | | 32 | MHz | | 60 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 32 | MHz | | 60 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 32 | MHz | | 60 |
| Standard operating voltage | VDD | 1.65 | | 3.6 | V | BOR detector disabled | 60 |
| Standard operating voltage | VDD | 1.8 | | 3.6 | V | BOR detector enabled, at power-on | 60 |
| Analog operating voltage (all features) | VDDA | 1.65 | | 3.6 | V | Must be the same voltage as VDD | 60 |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 60 |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 60 |
| Input voltage on BOOT0 pin | VIN | 0 | | 5.5 | V | | 60 |
| Power dissipation (LQFP32 package) | PD | | | 333 | mW | TA = 85 °C (range 6) or TA = 105 °C (range 7) | 61 |
| Power dissipation (LQFP32 package) | PD | | | 83 | mW | TA = 125 °C (range 3) | 61 |
| Temperature range, maximum power dissipation (range 3) | TA | -40 | | 125 | °C | | 61 |
| Junction temperature range (range 3) | TJ | -40 | | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 61 |
| Power-on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 62 |
| Power-on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 62 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 62 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 62 |
| Brown-out reset threshold 4 | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 62 |
| Brown-out reset threshold 4 | VBOR4 | 2.78 | 2.9 | 2.95 | V | Rising edge | 62 |
| Reset temporization | TRSTTEMPO | | 2 | 3.3 | ms | VDD rising, BOR enabled | 62 |
| Reset temporization | TRSTTEMPO | 0.4 | 0.7 | 1.6 | ms | VDD rising, BOR disabled | 62 |
| VDD rise time rate | tVDD | 0 | | 1000 | µs/V | BOR detector disabled | 62 |
| VDD fall time rate | | 0 | | 1000 | µs/V | BOR detector disabled | 62 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 63 |
| Internal reference startup time | TVREFINT | | 2 | 3 | ms | | 63 |
| VDDA and VREF+ voltage during VREFINT factory measure | VVREF_MEAS | 2.99 | 3 | 3.01 | V | | 63 |
| Accuracy of factory-measured VREFINT value | AVREF_MEAS | -5 | | 5 | mV | Including uncertainties due to ADC and VDDA/VREF+ values | 63 |
| Temperature coefficient | TCoeff | | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 63 |
| Voltage coefficient | VDDCoeff | | | 2000 | ppm/V | 3.0 V < VDDA < 3.6 V | 63 |
| Consumption of reference voltage buffer for ADC | IBUF_ADC | | 13.5 | 25 | µA | | 63 |
| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % VREFINT | | 64 |
| Supply current in Standby mode | IDD (Standby) | | 2.6 | 7 | µA | Independent watchdog and LSI OFF, TA = 125 °C | 73 |
| User external clock source frequency | fHSE_ext | 1 | 8 | 32 | MHz | CSS is ON or PLL is used | 79 |
| Oscillator frequency | fOSC_IN | 1 | | 25 | MHz | | 81 |
## CAD (KiCad official)
- Symbol: `STM32L071KBT6`
- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`
- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files: `stm32l071kbt6-etched.step` / `stm32l071kbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l071kbt6.step` / `stm32l071kbt6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886723626979328) (148 pp, sha256 `f413c7ce36b98e6c`, retrieved 2026-11-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l071kbt6-datasheet.pdf)