component
STM32L062K8T6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
STM32L062K8T6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)
STM32L062K8T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main power supply pin; the features list gives a 1.65 V to 3.6 V power supply range. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) I/O that also carries the RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2 functions and the OSC32_IN low-speed oscillator input. |
| 3 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O that also serves as the OSC32_OUT low-speed oscillator output. |
| 4 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Analog supply pin for the analog peripherals; its voltage limits are in Table 21 (General operating conditions), which is not included in the supplied text. |
| 6 | PA0 | bidirectional | Standard 3.3 V (TC) I/O with TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR and COMP1_OUT alternate functions, plus COMP1_INM6, ADC_IN0 and RTC_TAMP2/WKUP1 additional functions. |
| 7 | PA1 | bidirectional | 5 V tolerant I/O with EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE and TIM21_ETR alternate functions, plus COMP1_INP and ADC_IN1 additional functions. |
| 8 | PA2 | bidirectional | 5 V tolerant I/O with TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX and COMP2_OUT alternate functions, plus COMP2_INM6 and ADC_IN2 additional functions. |
| 9 | PA3 | bidirectional | 5 V tolerant I/O with TIM21_CH2, TIM2_CH4, TSC_G1_IO4 and USART2_RX alternate functions, plus COMP2_INP and ADC_IN3 additional functions. |
| 10 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR alternate functions, plus COMP1_INM4, COMP2_INM4, ADC_IN4 and DAC_OUT additional functions; it offers reduced touch sensing sensitivity and is recommended for use as a sampling capacitor I/O. |
| 11 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1 alternate functions, plus COMP1_INM5, COMP2_INM5 and ADC_IN5 additional functions. |
| 12 | PA6 | bidirectional | 5 V tolerant I/O with SPI1_MISO, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT alternate functions, plus ADC_IN6 additional function. |
| 13 | PA7 | bidirectional | 5 V tolerant I/O with SPI1_MOSI, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT alternate functions, plus ADC_IN7 additional function. |
| 14 | PB0 | bidirectional | 5 V tolerant I/O with EVENTOUT and TSC_G3_IO2 alternate functions, plus ADC_IN8 and VREF_OUT additional functions. |
| 15 | PB1 | bidirectional | 5 V tolerant I/O with TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE alternate functions, plus ADC_IN9 and VREF_OUT additional functions. |
| 16 | VSS | power_in | Ground pin. |
| 17 | VDD | power_in | Main power supply pin; the features list gives a 1.65 V to 3.6 V power supply range. |
| 18 | PA8 | bidirectional | 5 V tolerant I/O with MCO, USB_CRS_SYNC, EVENTOUT and USART1_CK alternate functions. |
| 19 | PA9 | bidirectional | 5 V tolerant I/O with MCO, TSC_G4_IO1 and USART1_TX alternate functions. |
| 20 | PA10 | bidirectional | 5 V tolerant I/O with TSC_G4_IO2 and USART1_RX alternate functions. |
| 21 | PA11 | bidirectional | 5 V tolerant I/O with SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT alternate functions, plus USB_DM additional function. |
| 22 | PA12 | bidirectional | 5 V tolerant I/O with SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT alternate functions, plus USB_DP additional function. |
| 23 | PA13 | bidirectional | 5 V tolerant I/O with SWDIO and USB_NOE alternate functions. |
| 24 | PA14 | bidirectional | 5 V tolerant I/O with SWCLK and USART2_TX alternate functions. |
| 25 | PA15 | bidirectional | 5 V tolerant I/O with SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1 alternate functions. |
| 26 | PB3 | bidirectional | 5 V tolerant I/O with SPI1_SCK, TIM2_CH2, TSC_G5_IO1 and EVENTOUT alternate functions, plus COMP2_INN additional function. |
| 27 | PB4 | bidirectional | 5 V tolerant I/O with SPI1_MISO, EVENTOUT, TSC_G5_IO2 and TIM22_CH1 alternate functions, plus COMP2_INP additional function. |
| 28 | PB5 | bidirectional | 5 V tolerant I/O with SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2 alternate functions, plus COMP2_INP additional function. |
| 29 | PB6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) and USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3 alternate functions, plus COMP2_INP additional function. |
| 30 | PB7 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) and USART1_RX, I2C1_SDA, LPTIM1_IN2 and TSC_G5_IO4 alternate functions, plus COMP2_INP and PVD_IN additional functions. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin (input-only, B structure) used for boot mode selection. |
| 32 | VSS | power_in | Ground pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
CAD (KiCad official)
- Symbol:
STM32L062K8T6 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l062k8t6-etched.step/stm32l062k8t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l062k8t6.step/stm32l062k8t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (124 pp, sha256
81323ff262365a26, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L062K8T6
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)
STM32L062K8T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main power supply pin; the features list gives a 1.65 V to 3.6 V power supply range. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) I/O that also carries the RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2 functions and the OSC32_IN low-speed oscillator input. |
| 3 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O that also serves as the OSC32_OUT low-speed oscillator output. |
| 4 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Analog supply pin for the analog peripherals; its voltage limits are in Table 21 (General operating conditions), which is not included in the supplied text. |
| 6 | PA0 | bidirectional | Standard 3.3 V (TC) I/O with TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR and COMP1_OUT alternate functions, plus COMP1_INM6, ADC_IN0 and RTC_TAMP2/WKUP1 additional functions. |
| 7 | PA1 | bidirectional | 5 V tolerant I/O with EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE and TIM21_ETR alternate functions, plus COMP1_INP and ADC_IN1 additional functions. |
| 8 | PA2 | bidirectional | 5 V tolerant I/O with TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX and COMP2_OUT alternate functions, plus COMP2_INM6 and ADC_IN2 additional functions. |
| 9 | PA3 | bidirectional | 5 V tolerant I/O with TIM21_CH2, TIM2_CH4, TSC_G1_IO4 and USART2_RX alternate functions, plus COMP2_INP and ADC_IN3 additional functions. |
| 10 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR alternate functions, plus COMP1_INM4, COMP2_INM4, ADC_IN4 and DAC_OUT additional functions; it offers reduced touch sensing sensitivity and is recommended for use as a sampling capacitor I/O. |
| 11 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1 alternate functions, plus COMP1_INM5, COMP2_INM5 and ADC_IN5 additional functions. |
| 12 | PA6 | bidirectional | 5 V tolerant I/O with SPI1_MISO, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT alternate functions, plus ADC_IN6 additional function. |
| 13 | PA7 | bidirectional | 5 V tolerant I/O with SPI1_MOSI, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT alternate functions, plus ADC_IN7 additional function. |
| 14 | PB0 | bidirectional | 5 V tolerant I/O with EVENTOUT and TSC_G3_IO2 alternate functions, plus ADC_IN8 and VREF_OUT additional functions. |
| 15 | PB1 | bidirectional | 5 V tolerant I/O with TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE alternate functions, plus ADC_IN9 and VREF_OUT additional functions. |
| 16 | VSS | power_in | Ground pin. |
| 17 | VDD | power_in | Main power supply pin; the features list gives a 1.65 V to 3.6 V power supply range. |
| 18 | PA8 | bidirectional | 5 V tolerant I/O with MCO, USB_CRS_SYNC, EVENTOUT and USART1_CK alternate functions. |
| 19 | PA9 | bidirectional | 5 V tolerant I/O with MCO, TSC_G4_IO1 and USART1_TX alternate functions. |
| 20 | PA10 | bidirectional | 5 V tolerant I/O with TSC_G4_IO2 and USART1_RX alternate functions. |
| 21 | PA11 | bidirectional | 5 V tolerant I/O with SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT alternate functions, plus USB_DM additional function. |
| 22 | PA12 | bidirectional | 5 V tolerant I/O with SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT alternate functions, plus USB_DP additional function. |
| 23 | PA13 | bidirectional | 5 V tolerant I/O with SWDIO and USB_NOE alternate functions. |
| 24 | PA14 | bidirectional | 5 V tolerant I/O with SWCLK and USART2_TX alternate functions. |
| 25 | PA15 | bidirectional | 5 V tolerant I/O with SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1 alternate functions. |
| 26 | PB3 | bidirectional | 5 V tolerant I/O with SPI1_SCK, TIM2_CH2, TSC_G5_IO1 and EVENTOUT alternate functions, plus COMP2_INN additional function. |
| 27 | PB4 | bidirectional | 5 V tolerant I/O with SPI1_MISO, EVENTOUT, TSC_G5_IO2 and TIM22_CH1 alternate functions, plus COMP2_INP additional function. |
| 28 | PB5 | bidirectional | 5 V tolerant I/O with SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2 alternate functions, plus COMP2_INP additional function. |
| 29 | PB6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) and USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3 alternate functions, plus COMP2_INP additional function. |
| 30 | PB7 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) and USART1_RX, I2C1_SDA, LPTIM1_IN2 and TSC_G5_IO4 alternate functions, plus COMP2_INP and PVD_IN additional functions. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin (input-only, B structure) used for boot mode selection. |
| 32 | VSS | power_in | Ground pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
## CAD (KiCad official)
- Symbol: `STM32L062K8T6`
- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`
- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files: `stm32l062k8t6-etched.step` / `stm32l062k8t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l062k8t6.step` / `stm32l062k8t6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923584206659584) (124 pp, sha256 `81323ff262365a26`, retrieved 2026-10-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l062k8t6-datasheet.pdf)