component
STM32L052K8T6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32L052K8T6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)
STM32L052K8T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main digital supply pin; for the orderable STM32L052K8T6 (no 'D' option suffix) the VDD range is 1.8 V to 3.6 V with BOR enabled. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) I/O that also serves as the 32.768 kHz LSE oscillator input OSC32_IN. |
| 3 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O that also serves as the LSE oscillator output OSC32_OUT. |
| 4 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Analog supply pin; the datasheet specifies the ADC down to 1.65 V and the DAC down to 1.8 V. |
| 6 | PA0 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR and COMP1_OUT, and additional functions ADC_IN0, COMP1_INM6 and RTC_TAMP2/WKUP1. |
| 7 | PA1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS_DE and TIM21_ETR, and additional functions ADC_IN1 and COMP1_INP. |
| 8 | PA2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX and COMP2_OUT, and additional functions ADC_IN2 and COMP2_INM6. |
| 9 | PA3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM21_CH2, TIM2_CH4, TSC_G1_IO4 and USART2_RX, and additional functions ADC_IN3 and COMP2_INP. |
| 10 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR, offering reduced touch sensing sensitivity so it is recommended as a sampling capacitor I/O. |
| 11 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1, and additional functions ADC_IN5, COMP1_INM5 and COMP2_INM5. |
| 12 | PA6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and additional function ADC_IN6. |
| 13 | PA7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT, and additional function ADC_IN7. |
| 14 | PB0 | bidirectional | 5 V tolerant (FT) I/O with alternate functions EVENTOUT and TSC_G3_IO2, and additional functions ADC_IN8 and VREF_OUT. |
| 15 | PB1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TSC_G3_IO3 and LPUART1_RTS_DE, and additional functions ADC_IN9 and VREF_OUT. |
| 16 | VSS | power_in | Ground reference pin; all datasheet voltages are referenced to VSS. |
| 17 | VDD | power_in | Main digital supply pin; for the orderable STM32L052K8T6 (no 'D' option suffix) the VDD range is 1.8 V to 3.6 V with BOR enabled. |
| 18 | PA8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions MCO, USB_CRS_SYNC, EVENTOUT and USART1_CK. |
| 19 | PA9 | bidirectional | 5 V tolerant (FT) I/O with alternate functions MCO, TSC_G4_IO1 and USART1_TX. |
| 20 | PA10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TSC_G4_IO2 and USART1_RX. |
| 21 | PA11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT, and additional function USB_DM; this pin is supplied by VDD_USB. |
| 22 | PA12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS_DE and COMP2_OUT, and additional function USB_DP; this pin is supplied by VDD_USB. |
| 23 | PA13 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SWDIO (serial wire debug data) and USB_NOE. |
| 24 | PA14 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SWCLK (serial wire debug clock) and USART2_TX. |
| 25 | PA15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1. |
| 26 | PB3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_SCK, TIM2_CH2, TSC_G5_IO1 and EVENTOUT, and additional function COMP2_INN. |
| 27 | PB4 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, EVENTOUT, TSC_G5_IO2 and TIM22_CH1, and additional function COMP2_INP. |
| 28 | PB5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2, and additional function COMP2_INP. |
| 29 | PB6 | bidirectional | 5 V tolerant, Fast-mode Plus capable (FTf) I/O with alternate functions USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3, and additional function COMP2_INP. |
| 30 | PB7 | bidirectional | 5 V tolerant, Fast-mode Plus capable (FTf) I/O with alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2 and TSC_G5_IO4, and additional functions COMP2_INP and PVD_IN. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin with no alternate functions listed in the pin definition table. |
| 32 | VSS | power_in | Ground reference pin; all datasheet voltages are referenced to VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
CAD (KiCad official)
- Symbol:
STM32L052K8T6 - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l052k8t6-etched.step/stm32l052k8t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l052k8t6.step/stm32l052k8t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (143 pp, sha256
501c06e19fb3cdbd, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).