Generated by kicad-footprint-generator · KiCad file format 20260206
STM32L051K8U6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)
STM32L051K8U6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital supply pin; the device operates from a 1.65 V to 3.6 V power supply. |
| 2 | PC14-OSC32_IN (PC14) | bidirectional | 5 V tolerant I/O (FT) that can also serve as OSC32_IN for the 32 kHz oscillator. |
| 3 | PC15-OSC32_OUT (PC15) | bidirectional | Standard 3.3 V I/O (TC) that can also serve as OSC32_OUT for the 32 kHz oscillator. |
| 4 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Analog supply for the ADC, comparators and internal voltage reference; the ADC is specified down to 1.65 V. |
| 6 | PA0 | bidirectional | Standard 3.3 V I/O (TC); alternate functions include TIM2_CH1, USART2_CTS, TIM2_ETR and COMP1_OUT, and additional functions include ADC_IN0, COMP1_INM6 and RTC_TAMP2/WKUP1. |
| 7 | PA1 | bidirectional | 5 V tolerant I/O (FT); alternate functions include EVENTOUT, TIM2_CH2, USART2_RTS_DE and TIM21_ETR, and additional functions include ADC_IN1 and COMP1_INP. |
| 8 | PA2 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM21_CH1, TIM2_CH3, USART2_TX and COMP2_OUT, and additional functions include ADC_IN2 and COMP2_INM6. |
| 9 | PA3 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM21_CH2, TIM2_CH4 and USART2_RX, and additional functions include ADC_IN3 and COMP2_INP. |
| 10 | PA4 | bidirectional | Standard 3.3 V I/O (TC); alternate functions include SPI1_NSS, USART2_CK and TIM22_ETR, and additional functions include ADC_IN4, COMP1_INM4 and COMP2_INM4. |
| 11 | PA5 | bidirectional | Standard 3.3 V I/O (TC); alternate functions include SPI1_SCK, TIM2_ETR and TIM2_CH1, and additional functions include ADC_IN5, COMP1_INM5 and COMP2_INM5. |
| 12 | PA6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI1_MISO, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and an additional function ADC_IN6. |
| 13 | PA7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI1_MOSI, TIM22_CH2, EVENTOUT and COMP2_OUT, and an additional function ADC_IN7. |
| 14 | PB0 | bidirectional | 5 V tolerant I/O (FT); alternate function EVENTOUT, additional functions ADC_IN8 and VREF_OUT. |
| 15 | PB1 | bidirectional | 5 V tolerant I/O (FT); alternate function LPUART1_RTS_DE, additional functions ADC_IN9 and VREF_OUT. |
| 16 | PB2 | bidirectional | 5 V tolerant I/O (FT) with alternate function LPTIM1_OUT. |
| 17 | VDD | power_in | Digital supply pin; the device operates from a 1.65 V to 3.6 V power supply. |
| 18 | PA8 | bidirectional | 5 V tolerant I/O (FT); alternate functions include MCO, EVENTOUT and USART1_CK. |
| 19 | PA9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include MCO and USART1_TX. |
| 20 | PA10 | bidirectional | 5 V tolerant I/O (FT) with alternate function USART1_RX. |
| 21 | PA11 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT. |
| 22 | PA12 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI1_MOSI, EVENTOUT, USART1_RTS_DE and COMP2_OUT. |
| 23 | PA13 | bidirectional | 5 V tolerant I/O (FT) whose alternate function is SWDIO (serial wire debug data). |
| 24 | PA14 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SWCLK (serial wire debug clock) and USART2_TX. |
| 25 | PA15 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1. |
| 26 | PB3 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI1_SCK, TIM2_CH2 and EVENTOUT, and an additional function COMP2_INN. |
| 27 | PB4 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI1_MISO, EVENTOUT and TIM22_CH1, and an additional function COMP2_INP. |
| 28 | PB5 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2, and an additional function COMP2_INP. |
| 29 | PB6 | bidirectional | 5 V tolerant, Fast-mode Plus capable I/O (FTf); alternate functions include USART1_TX, I2C1_SCL and LPTIM1_ETR, and an additional function COMP2_INP. |
| 30 | PB7 | bidirectional | 5 V tolerant, Fast-mode Plus capable I/O (FTf); alternate functions include USART1_RX, I2C1_SDA and LPTIM1_IN2, and additional functions COMP2_INP and PVD_IN. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin (type B in Table 14) used to select the boot mode. |
| 32 | PB8 | bidirectional | 5 V tolerant, Fast-mode Plus capable I/O (FTf) with alternate function I2C1_SCL. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDDIO2, VDD) | VDD-VSS | -0.3 | 4 | V | 49 | ||
| Input voltage on FT and FTf pins | VIN | -0.3 | V | min is VSS−0.3; max printed as VDD+4.0 (not numeric) | 49 | ||
| Input voltage on TC pins | VIN | -0.3 | 4 | V | 49 | ||
| Input voltage on any other pin | VIN | -0.3 | 4 | V | 49 | ||
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 49 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | 49 | |||
| Variations between all different ground pins | /ΔVSS/ | 50 | mV | 49 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ -VDDA | 0.4 | V | 49 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 50 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 50 | |||
| Total current into VDDIO2 power line (source) | ΣIVDDIO2 | 25 | mA | 50 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 50 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 50 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | 50 | |||
| Output current sunk by FTf pins | IIO | 22 | mA | 50 | |||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | printed as -16 | 50 | ||
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | 90 | mA | 50 | |||
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | 25 | mA | 50 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | printed as -90 | 50 | ||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | printed -5/+0 | 50 | |
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | printed ±5 | 50 | |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | printed ±25 | 50 | |
| Storage temperature range | TSTG | -65 | 150 | °C | 50 | ||
| Maximum junction temperature | TJ | 150 | °C | 50 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 51 | ||
| Standard operating voltage VDD | VDD | 1.65 | 3.6 | V | BOR detector disabled | 51 | |
| Standard operating voltage VDD | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 51 | |
| Analog operating voltage (all features) | VDDA | 1.65 | 3.6 | V | Must be the same voltage as VDD | 51 | |
| Standard operating voltage VDDIO2 | VDDIO2 | 1.65 | 3.6 | V | 51 | ||
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 51 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 51 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 51 | ||
| Power dissipation UFQFPN32 package | PD | 526 | mW | TA = 85 °C (range 6) | 51 | ||
| Ambient temperature range (maximum power dissipation, range 6) | TA | -40 | 85 | °C | range 6 | 52 | |
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C (range 6) | 52 | |
| Power-on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 53 |
| Power-on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 53 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 54 |
| VDDA and VREF+ voltage during VREFINT factory measure | VVREF_MEAS | 2.99 | 3 | 3.01 | V | 54 | |
| Accuracy of factory-measured VREFINT value | AVREF_MEAS | -5 | 5 | mV | Including uncertainties due to ADC and VDDA/VREF+ values; printed ±5 mV | 54 | |
| Temperature coefficient of VREFINT | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 54 | |
| Supply current in Run mode, code executed from Flash | IDD (Run from Flash) | 6.3 | 6.8 | mA | Range 1, VCORE=1.8 V, VOS[1:0]=01, fHCLK 32 MHz | 56 | |
| Supply current in Stop mode | IDD (Stop) | 0.41 | 1 | µA | TA = −40 to 25 °C | 62 | |
| Supply current in Stop mode | IDD (Stop) | 1.7 | 4.5 | µA | TA = 85 °C | 62 | |
| Supply current in Standby mode | IDD (Standby) | 0.29 | 0.6 | µA | Independent watchdog and LSI OFF, TA = −40 to 25 °C | 63 | |
| Supply current of PLL on VDDA | IDDA(PLL) | 220 | 450 | µA | 74 | ||
| Supply current of PLL on VDD | IDD(PLL) | 120 | 150 | µA | 74 | ||
| High-speed external oscillator frequency | fOSC_IN | 1 | 25 | MHz | 69 | ||
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -1.5 | 1.5 | % | VDDA = 3.0 V, TA = 0 to 55 °C | 71 | |
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -5.45 | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = − 40 to 125 °C | 71 | |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | 72 | |
| LSI oscillator frequency drift | DLSI | -10 | 4 | % | 0°C ≤ TA ≤ 85°C; for an individual part after initial measurement | 72 | |
| Input leakage current (all I/Os except PA11, PA12, BOOT0 and FTf) | Ilkg | -50 | 50 | nA | VSS ≤ VIN ≤ VDD | 80 | |
| Weak pull-up equivalent resistor | RPU | 30 | 45 | 60 | kΩ | VIN = VSS | 80 |
| Weak pull-down equivalent resistor | RPD | 30 | 45 | 60 | kΩ | VIN = VDD | 80 |
| Output low level voltage for an I/O pin, CMOS port | VOL | 0.4 | V | IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | 82 | ||
| NRST input low level voltage | VIL(NRST) | 0.8 | V | 84 | |||
| NRST weak pull-up equivalent resistor | RPU | 30 | 45 | 60 | kΩ | VIN = VSS | 84 |
| NRST input filtered pulse | VF(NRST) | 50 | ns | 84 |
CAD (KiCad official)
- Symbol:
STM32L051K8U6 - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
stm32l051k8u6-etched.step/stm32l051k8u6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l051k8u6.step/stm32l051k8u6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (131 pp, sha256
457bab7943900413, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).