Generated by kicad-footprint-generator · KiCad file format 20260206
STM32L051C6T6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)
STM32L051C6T6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main MCU supply pin, operating in the 1.65 V to 3.6 V power supply range stated in the features. |
| 2 | PC13 | bidirectional | 5 V tolerant I/O (FT) that also serves RTC_TAMP1/RTC_TS/RTC_OUT and WKUP2 functions. |
| 3 | PC14-OSC32_IN (PC14) | bidirectional | 5 V tolerant I/O (FT) that doubles as the 32 kHz oscillator input OSC32_IN. |
| 4 | PC15-OSC32_OUT (PC15) | bidirectional | Standard 3.3 V I/O (TC) that doubles as the 32 kHz oscillator output OSC32_OUT. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O (TC) that doubles as the high-speed oscillator input OSC_IN. |
| 6 | PH1-OSC_OUT (PH1) | bidirectional | Standard 3.3 V I/O (TC) that doubles as the high-speed oscillator output OSC_OUT. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | VSSA | power_in | Analog ground pin for the ADC, comparators and reference voltage; all voltages are referenced to VSS. |
| 9 | VDDA | power_in | Analog supply pin for the ADC, comparators and internal reference voltage. |
| 10 | PA0 | bidirectional | Standard 3.3 V I/O (TC) with ADC_IN0, COMP1_INM6, TIM2_CH1, USART2_CTS and TIM2_ETR alternate functions. |
| 11 | PA1 | bidirectional | 5 V tolerant I/O (FT) with ADC_IN1, COMP1_INP, TIM2_CH2, USART2_RTS_DE and TIM21_ETR alternate functions. |
| 12 | PA2 | bidirectional | 5 V tolerant I/O (FT) with ADC_IN2, COMP2_INM6, TIM21_CH1, TIM2_CH3, USART2_TX and COMP2_OUT alternate functions. |
| 13 | PA3 | bidirectional | 5 V tolerant I/O (FT) with ADC_IN3, COMP2_INP, TIM21_CH2, TIM2_CH4 and USART2_RX alternate functions. |
| 14 | PA4 | bidirectional | Standard 3.3 V I/O (TC) with ADC_IN4, COMP1_INM4, COMP2_INM4, SPI1_NSS, USART2_CK and TIM22_ETR alternate functions. |
| 15 | PA5 | bidirectional | Standard 3.3 V I/O (TC) with ADC_IN5, COMP1_INM5, COMP2_INM5, SPI1_SCK, TIM2_ETR and TIM2_CH1 alternate functions. |
| 16 | PA6 | bidirectional | 5 V tolerant I/O (FT) with ADC_IN6, SPI1_MISO, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT alternate functions. |
| 17 | PA7 | bidirectional | 5 V tolerant I/O (FT) with ADC_IN7, SPI1_MOSI, TIM22_CH2, EVENTOUT and COMP2_OUT alternate functions. |
| 18 | PB0 | bidirectional | 5 V tolerant I/O (FT) with ADC_IN8, VREF_OUT and EVENTOUT alternate functions. |
| 19 | PB1 | bidirectional | 5 V tolerant I/O (FT) with ADC_IN9, VREF_OUT and LPUART1_RTS_DE alternate functions. |
| 20 | PB2 | bidirectional | 5 V tolerant I/O (FT) with LPTIM1_OUT alternate function. |
| 21 | PB10 | bidirectional | 5 V tolerant I/O (FT) with TIM2_CH3, LPUART1_TX, SPI2_SCK and I2C2_SCL alternate functions. |
| 22 | PB11 | bidirectional | 5 V tolerant I/O (FT) with EVENTOUT, TIM2_CH4, LPUART1_RX and I2C2_SDA alternate functions. |
| 23 | VSS | power_in | Ground pin of the MCU, the reference for all voltages. |
| 24 | VDD | power_in | Main MCU supply pin, operating in the 1.65 V to 3.6 V power supply range stated in the features. |
| 25 | PB12 | bidirectional | 5 V tolerant I/O (FT) with SPI2_NSS/I2S2_WS, LPUART1_RTS_DE and EVENTOUT alternate functions. |
| 26 | PB13 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with SPI2_SCK/I2S2_CK, LPUART1_CTS, I2C2_SCL and TIM21_CH1 alternate functions. |
| 27 | PB14 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with SPI2_MISO/I2S2_MCK, RTC_OUT, LPUART1_RTS_DE, I2C2_SDA and TIM21_CH2 alternate functions. |
| 28 | PB15 | bidirectional | 5 V tolerant I/O (FT) with SPI2_MOSI/I2S2_SD and RTC_REFIN alternate functions. |
| 29 | PA8 | bidirectional | 5 V tolerant I/O (FT) with MCO, EVENTOUT and USART1_CK alternate functions. |
| 30 | PA9 | bidirectional | 5 V tolerant I/O (FT) with MCO and USART1_TX alternate functions. |
| 31 | PA10 | bidirectional | 5 V tolerant I/O (FT) with USART1_RX alternate function. |
| 32 | PA11 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT alternate functions. |
| 33 | PA12 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MOSI, EVENTOUT, USART1_RTS_DE and COMP2_OUT alternate functions. |
| 34 | PA13 | bidirectional | 5 V tolerant I/O (FT) whose alternate function is SWDIO for the serial wire debug port. |
| 35 | VSS | power_in | Ground pin of the MCU, the reference for all voltages. |
| 36 | VDDIO2 | power_in | Supply pin for the I/O group supplied through VDDIO2 (I/O supplied by VDDIO2 per the pinout note). |
| 37 | PA14 | bidirectional | 5 V tolerant I/O (FT) whose alternate functions include SWCLK and USART2_TX. |
| 38 | PA15 | bidirectional | 5 V tolerant I/O (FT) with SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1 alternate functions. |
| 39 | PB3 | bidirectional | 5 V tolerant I/O (FT) with SPI1_SCK, TIM2_CH2, EVENTOUT and COMP2_INN alternate functions. |
| 40 | PB4 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MISO, EVENTOUT, TIM22_CH1 and COMP2_INP alternate functions. |
| 41 | PB5 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM22_CH2 and COMP2_INP alternate functions. |
| 42 | PB6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with USART1_TX, I2C1_SCL and LPTIM1_ETR alternate functions. |
| 43 | PB7 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with USART1_RX, I2C1_SDA, LPTIM1_IN2, COMP2_INP and PVD_IN alternate functions. |
| 44 | BOOT0 | input | Dedicated BOOT0 pin used for boot mode selection. |
| 45 | PB8 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with I2C1_SCL alternate function. |
| 46 | PB9 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with EVENTOUT, I2C1_SDA and SPI2_NSS/I2S2_WS alternate functions. |
| 47 | VSS | power_in | Ground pin of the MCU, the reference for all voltages. |
| 48 | VDD | power_in | Main MCU supply pin, operating in the 1.65 V to 3.6 V power supply range stated in the features. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standard operating voltage VDD (BOR detector disabled) | VDD | 1.65 | 3.6 | V | BOR detector disabled | 51 | |
| Standard operating voltage VDD (BOR enabled at power-on) | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 51 | |
| Analog operating voltage VDDA | VDDA | 1.65 | 3.6 | V | Must be the same voltage as VDD | 51 | |
| Standard operating voltage VDDIO2 | VDDIO2 | 1.65 | 3.6 | V | 51 | ||
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 51 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 51 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 51 | ||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 51 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 51 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 51 | ||
| Temperature range (maximum power dissipation, range 6) | TA | -40 | 85 | °C | Maximum power dissipation (range 6) | 52 | |
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C | 52 | |
| Power dissipation LQFP48 package | PD | 363 | mW | TA = 85 °C (range 6) | 51 | ||
| External main supply voltage VDD-VSS | VDD-VSS | -0.3 | 4 | V | Including VDDA, VDDIO2, VDD | 49 | |
| Input voltage on any other pin | VIN | -0.3 | 4 | V | 49 | ||
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 49 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | 49 | |||
| Variations between all different ground pins | /ΔVSS/ | 50 | mV | 49 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ -VDDA | 0.4 | V | 49 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 50 | ||
| Maximum junction temperature | TJ | 150 | °C | 50 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 50 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 50 | |||
| Total current into VDDIO2 power line (source) | ΣIVDDIO2 | 25 | mA | 50 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 50 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 50 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | 50 | |||
| Output current sunk by FTf pins | IIO | 22 | mA | 50 | |||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | 50 | |||
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | 90 | mA | 50 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | 50 | |||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | 50 | ||
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | 50 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 50 | ||
| Electrostatic discharge voltage (human body model) | VESD(HBM) | 2000 | V | TA = +25 °C, conforming to ANSI/JEDEC JS-001 | 78 | ||
| Electrostatic discharge voltage (charge device model) | VESD(CDM) | 500 | V | TA = +25 °C, conforming to ANSI/ESD STM5.3.1 | 78 | ||
| Oscillator frequency (HSE crystal/ceramic resonator) | fOSC_IN | 1 | 25 | MHz | 69 | ||
| User external clock source frequency (HSE) | fHSE_ext | 1 | 8 | 32 | MHz | CSS is ON or PLL is used | 67 |
| LSE oscillator frequency | fLSE | 32.768 | kHz | 70 | |||
| Frequency HSI16 (16 MHz RC) | fHSI16 | 16 | MHz | VDD = 3.0 V | 71 | ||
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -1.5 | 1.5 | % | VDDA = 3.0 V, TA = 0 to 55 °C | 71 | |
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -5.45 | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = −40 to 125 °C | 71 | |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | Guaranteed by test in production | 72 |
| MSI frequency after factory calibration (range 6) | fMSI | 4.2 | MHz | MSI range 6; VDD = 3.3 V and TA = 25 °C | 72 | ||
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 74 | ||
| Programming time for word or half-page (programming) | tprog | 3.28 | 3.94 | ms | Programming | 74 | |
| Cycling (erase / write) program memory | NCYC | 10 | kcycles | TA = -40°C to 105 °C | 75 | ||
| Cycling (erase / write) EEPROM data memory | NCYC | 100 | kcycles | 75 | |||
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 54 |
| Temperature coefficient of VREFINT | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 54 | |
| Voltage coefficient of VREFINT | VDDCoeff | 2000 | ppm/V | 3.0 V < VDDA < 3.6 V | 54 | ||
| Power-on/power down reset threshold falling edge | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 53 |
| Power-on/power down reset threshold rising edge | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 53 |
| NRST input low level voltage | VIL(NRST) | 0.8 | V | 84 | |||
| NRST input high level voltage | VIH(NRST) | 1.4 | V | 84 | |||
| NRST output low level voltage | VOL(NRST) | 0.4 | V | IOL = 2 mA, 2.7 V < VDD < 3.6 V | 84 | ||
| Weak pull-up equivalent resistor NRST | RPU | 30 | 45 | 60 | kΩ | VIN = VSS | 84 |
| Weak pull-up equivalent resistor I/O | RPU | 30 | 45 | 60 | kΩ | VIN = VSS | 80 |
| Weak pull-down equivalent resistor I/O | RPD | 30 | 45 | 60 | kΩ | VIN = VDD | 80 |
| I/O pin capacitance | CIO | 5 | pF | 80 | |||
| Output low level voltage for an I/O pin CMOS port | VOL | 0.4 | V | IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | 82 | ||
| Output high level voltage for an I/O pin TTL port | VOH | 2.4 | V | IIO = -6 mA, 2.7 V ≤ VDD ≤ 3.6 V | 82 |
CAD (KiCad official)
- Symbol:
STM32L051C6T6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l051c6t6-etched.step/stm32l051c6t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l051c6t6.step/stm32l051c6t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (131 pp, sha256
457bab7943900413, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).