STM32L011F4P6

{
 "schema": "adom.pads/1",
 "slug": "stm32l011f4p6",
 "footprint": "TSSOP-20_4.4x6.5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-20_4.4x6.5mm_P0.65mm@sha256:b7ca3a31dd45c122",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.8625,
   -2.925
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-20_4.4x6.5mm_P0.65mm@sha256:b7ca3a31dd45c122"
 },
 "pad_count": 20,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "17",
  "18",
  "19",
  "2",
  "20",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -2.925
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "PB9/BOOT0",
   "type": "input",
   "description": "Boot-mode select input (B-type). After reset acts as BOOT0; system boots from user Flash, system memory, or SRAM depending on BOOT0 level sampled at reset. Also available as PB9 GPIO after reset if BOOT0 remapped via option bytes.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "PC14-OSC32_IN",
   "type": "bidirectional",
   "description": "5V-tolerant I/O (FT). Additional function: LSE 32.768 kHz crystal oscillator input (OSC32_IN). Doubles as PC14 GPIO when LSE not used.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "PC15-OSC32_OUT",
   "type": "bidirectional",
   "description": "Standard 3.3 V I/O (TC). Additional function: LSE 32.768 kHz crystal oscillator output (OSC32_OUT). Doubles as PC15 GPIO when LSE not used.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "NRST",
   "type": "bidirectional",
   "description": "Device reset input, active low, with internal weak pull-up (RST type). Also driven low internally to signal an internal reset source. Pull externally low >20 us to force reset.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "VDDA",
   "type": "power_in",
   "description": "Analog supply for ADC, comparators, reset block, PLL, and internal voltage reference. Must equal or exceed VDD; range 1.65 V-3.6 V. Decouple to VSS with 100 nF + 1 uF close to the pin.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "PA0-CK_IN",
   "type": "bidirectional",
   "description": "3.3 V ADC-tolerant I/O (TTa). Alt functions: USART2_RX/CTS, LPTIM1_IN1, TIM2_CH1/ETR, LPUART1_RX, COMP1_OUT. Additional: COMP1_INM, ADC_IN0, RTC_TAMP2/WKUP1, CK_IN (external clock in).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "PA1",
   "type": "bidirectional",
   "description": "5V-tolerant I/O (FT). Alt functions: EVENTOUT, LPTIM1_IN2, TIM2_CH2, I2C1_SMBA, USART2_RTS, TIM21_ETR, LPUART1_TX. Additional: COMP1_INP, ADC_IN1.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "PA2",
   "type": "bidirectional",
   "description": "3.3 V ADC-tolerant I/O (TTa). Alt functions: TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX, COMP2_OUT. Additional: COMP2_INM, ADC_IN2, RTC_TAMP3/RTC_TS/RTC_OUT/WKUP3.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "PA3",
   "type": "bidirectional",
   "description": "5V-tolerant I/O (FT). Alt functions: TIM21_CH2, TIM2_CH4, USART2_RX, LPUART1_RX. Additional: COMP2_INP, ADC_IN3.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    2.925
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "PA4",
   "type": "bidirectional",
   "description": "3.3 V ADC-tolerant I/O (TTa). Alt functions: SPI1_NSS, LPTIM1_IN1/ETR, I2C1_SCL, USART2_CK, TIM2_ETR, LPUART1_TX, COMP2_OUT. Additional: COMP1_INM, COMP2_INM, ADC_IN4.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    2.925
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "PA5",
   "type": "bidirectional",
   "description": "3.3 V ADC-tolerant I/O (TTa). Alt functions: SPI1_SCK, LPTIM1_IN2, TIM2_ETR, TIM2_CH1. Additional: COMP1_INM, COMP2_INM, ADC_IN5.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "PA6",
   "type": "bidirectional",
   "description": "5V-tolerant I/O (FT). Alt functions: SPI1_MISO, LPTIM1_ETR, LPUART1_CTS, EVENTOUT, COMP1_OUT. Additional: ADC_IN6.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "PA7",
   "type": "bidirectional",
   "description": "5V-tolerant I/O (FT). Alt functions: SPI1_MOSI, LPTIM1_OUT, USART2_CTS, TIM21_ETR, EVENTOUT, COMP2_OUT. Additional: COMP2_INP, ADC_IN7.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "PB1",
   "type": "bidirectional",
   "description": "5V-tolerant I/O (FT). Alt functions: USART2_CK, SPI1_MOSI, LPTIM1_IN1, LPUART1_RTS, TIM2_CH4. Additional: ADC_IN9, VREF_OUT.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "VSS",
   "type": "power_in",
   "description": "Digital and analog ground reference (0 V). Tie to system ground plane; footnote 5 confirms this pin serves both digital and analog return.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "VDD",
   "type": "power_in",
   "description": "Main digital supply, 1.65 V-3.6 V. Powers I/Os and internal regulator. Decouple to VSS with 100 nF close to the pin.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "17",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "17",
   "name": "PA9",
   "type": "bidirectional",
   "description": "5V-tolerant Fm+ I/O (FTf). Alt functions: MCO clock output, I2C1_SCL, LPTIM1_OUT, USART2_TX, TIM21_CH2, COMP1_OUT.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "18",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "18",
   "name": "PA10",
   "type": "bidirectional",
   "description": "5V-tolerant Fm+ I/O (FTf). Alt functions: TIM21_CH1, I2C1_SDA, RTC_REFIN, USART2_RX, TIM2_CH3, COMP1_OUT.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "19",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "19",
   "name": "PA13",
   "type": "bidirectional",
   "description": "5V-tolerant Fm+ I/O (FTf). Default after reset: SWDIO (serial-wire debug data). Alt functions: SWDIO, LPTIM1_ETR, I2C1_SDA, SPI1_SCK, LPUART1_RX, COMP1_OUT.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "20",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -2.925
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "20",
   "name": "PA14",
   "type": "bidirectional",
   "description": "5V-tolerant I/O (FT). Default after reset: SWCLK (serial-wire debug clock). Alt functions: SWCLK, LPTIM1_OUT, I2C1_SMBA, USART2_TX, SPI1_MISO, LPUART1_TX, COMP2_OUT.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-20_4.4x6.5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}