component
STM32H7B0RBT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM32H7B0RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM32H7B0RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VBAT | power_in | Backup domain supply for RTC, LSE oscillator and backup registers; 1.62-3.6 V. |+| 2 | PC13 | bidirectional | 5 V-tolerant GPIO; additional functions TAMP_IN1/OUT2/OUT3, RTC_OUT1/TS, WKUP2; floating input after reset. |+| 3 | PC14-OSC32_IN | bidirectional | 5 V-tolerant GPIO; serves as LSE oscillator input (OSC32_IN) when 32.768 kHz crystal is used; floating input after reset. |+| 4 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant GPIO; serves as LSE oscillator output (OSC32_OUT) when 32.768 kHz crystal is used; floating input after reset. |+| 5 | PH0-OSC_IN | bidirectional | 5 V-tolerant GPIO; serves as HSE oscillator input (OSC_IN) for external 4-50 MHz crystal; floating input after reset. |+| 6 | PH1-OSC_OUT | bidirectional | 5 V-tolerant GPIO; serves as HSE oscillator output (OSC_OUT); floating input after reset. |+| 7 | NRST | bidirectional | Active-low bidirectional reset pin with embedded weak pull-up resistor; minimum valid reset pulse width 100 µs. |+| 8 | PC0 | bidirectional | 5 V-tolerant analog GPIO with ADC12_INP10; alternate functions include DFSDM1_CKIN0, SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, LCD_G2/R5. |+| 9 | PC1 | bidirectional | 5 V-tolerant analog GPIO with ADC12_INP11/INN10; alternate functions include TRACED0, SPI2_MOSI/I2S2_SDO, SAI1_SD_A, SDMMC2_CK, OCTOSPIM_P1_IO4, MDIOS_MDC. |+| 10 | PC2 | bidirectional | 5 V-tolerant analog GPIO with ADC12_INP12, PWR_CSTOP; alternate functions include SPI2_MISO/I2S2_SDI, DFSDM1_CKOUT, OCTOSPIM_P1_IO2/IO5, FMC_SDNE0. |+| 11 | PC3 | bidirectional | 5 V-tolerant analog GPIO with ADC12_INP13, PWR_CSLEEP; alternate functions include SPI2_MOSI/I2S2_SDO, OCTOSPIM_P1_IO0/IO6, FMC_SDCKE0. |+| 12 | VSSA | power_in | Analog ground reference for ADC, DAC, COMP, and OPAMP; must be connected to the same potential as VSS with filtering capacitors. |+| 13 | VDDA | power_in | Analog supply for ADC/DAC/COMP/OPAMP/VREFBUF; 1.62-3.6 V (min 1.8 V for DAC and VREFBUF, 2.0 V for OPAMP); no separate VREF+ in this package. |+| 14 | PA0 | bidirectional | 5 V-tolerant analog GPIO with ADC1_INP16, WKUP0; alternate functions include TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, UART4_TX, SDMMC2_CMD, SAI2_SD_B. |+| 15 | PA1 | bidirectional | 5 V-tolerant GPIO with ADC1_INP17; alternate functions include TIM2_CH2, TIM5_CH2, LPTIM3_OUT, USART2_RTS, UART4_RX, OCTOSPIM_P1_IO3/DQS, SAI2_MCK_B, LCD_R2. |+| 16 | PA2 | bidirectional | 5 V-tolerant analog GPIO with ADC1_INP14, WKUP1; alternate functions include TIM2_CH3, TIM5_CH3, TIM15_CH1, USART2_TX, SAI2_SCK_B, MDIOS_MDIO, LCD_R1. |+| 17 | PA3 | bidirectional | 5 V-tolerant GPIO with ADC1_INP15; alternate functions include TIM2_CH4, TIM5_CH4, OCTOSPIM_P1_CLK, TIM15_CH2, USART2_RX, OTG_HS_ULPI_D0, LCD_B2/B5. |+| 18 | VSS | power_in | Digital ground; each VSS pin must be decoupled with 100 nF capacitor on the adjacent VDD pin. |+| 19 | VDD | power_in | Main digital supply, 1.62-3.6 V; 100 nF decoupling capacitor required on each VDD pin per AN5307. |+| 20 | PA4 | bidirectional | 3.3 V-tolerant analog GPIO with ADC1_INP18, DAC1_OUT1; alternate functions include TIM5_ETR, SPI1/3/6_NSS/I2Sx_WS, USART2_CK, DCMI_HSYNC/PSSI_DE, LCD_VSYNC. |+| 21 | PA5 | bidirectional | 3.3 V-tolerant GPIO with ADC1_INP19, DAC1_OUT2, PWR_NDSTOP2; alternate functions include TIM2_CH1/ETR, TIM8_CH1N, SPI1/6_SCK, OTG_HS_ULPI_CK, LCD_R4. |+| 22 | PA6 | bidirectional | 3.3 V-tolerant GPIO with ADC12_INP3, DAC2_OUT1; alternate functions include TIM1/8_BKIN, TIM3_CH1, SPI1/6_MISO, OCTOSPIM_P1_IO3, TIM13_CH1, MDIOS_MDC, LCD_G2. |+| 23 | PA7 | bidirectional | 5 V-tolerant analog GPIO with ADC12_INP7, OPAMP1_VINM; alternate functions include TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1/6_MOSI, TIM14_CH1, OCTOSPIM_P1_IO2, LCD_VSYNC. |+| 24 | PC4 | bidirectional | 5 V-tolerant analog GPIO with ADC12_INP4, OPAMP1_VOUT, COMP1_INM; alternate functions include DFSDM1_CKIN2, I2S1_MCK, SPDIFRX1_IN2, FMC_SDNE0, LCD_R7. |+| 25 | PC5 | bidirectional | 5 V-tolerant GPIO with ADC12_INP8, OPAMP1_VINM; alternate functions include SAI1_D3, DFSDM1_DATIN2, SPDIFRX1_IN3, OCTOSPIM_P1_DQS, FMC_SDCKE0, COMP1_OUT, LCD_DE. |+| 26 | PB0 | bidirectional | 5 V-tolerant GPIO with ADC12_INP9, OPAMP1_VINP, COMP1_INP; alternate functions include TIM1/3/8 CH2N/CH3/CH2N, UART4_CTS, OTG_HS_ULPI_D1, OCTOSPIM_P1_IO1, LCD_R3/G1. |+| 27 | PB1 | bidirectional | 5 V-tolerant GPIO with ADC12_INP5, COMP1_INM; alternate functions include TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, OTG_HS_ULPI_D2, OCTOSPIM_P1_IO0, LCD_R6/G0. |+| 28 | PB2 | bidirectional | 5 V-tolerant GPIO with COMP1_INP; alternate functions include RTC_OUT2, SAI1_D1/SD_A, DFSDM1_CKIN1, SPI3_MOSI/I2S3_SDO, OCTOSPIM_P1_CLK/DQS. |+| 29 | PB10 | bidirectional | 5 V-tolerant I2C FM+ GPIO; alternate functions include TIM2_CH3, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, OCTOSPIM_P1_NCS, OTG_HS_ULPI_D3, LCD_G4. |+| 30 | VCAP | passive | Internal LDO core voltage output (VCORE 0.95-1.35 V depending on VOS0-VOS3); connect 2.2 µF low-ESR ceramic capacitor to VSS. |+| 31 | VSS | power_in | Digital ground. |+| 32 | VDD | power_in | Main digital supply, 1.62-3.6 V; 100 nF decoupling capacitor required. |+| 33 | PB12 | bidirectional | 5 V-tolerant GPIO; alternate functions include TIM1_BKIN, OCTOSPIM_P1_NCLK, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5, DFSDM2_DATIN1, UART5_RX. |+| 34 | PB13 | bidirectional | 5 V-tolerant GPIO; alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS/NSS, FDCAN2_TX, OTG_HS_ULPI_D6, SDMMC1_D0, UART5_TX. |+| 35 | PB14 | bidirectional | 5 V-tolerant GPIO; alternate functions include TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0, LCD_CLK. |+| 36 | PB15 | bidirectional | 5 V-tolerant GPIO; alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO, DFSDM1_CKIN2, SDMMC2_D1, LCD_G7. |+| 37 | PC6 | bidirectional | 5 V-tolerant GPIO with SWPMI_IO additional function; alternate functions include TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDMMC1_D0DIR, FMC_NWAIT, SDMMC1/2_D6, LCD_HSYNC. |+| 38 | PC7 | bidirectional | 5 V-tolerant GPIO; alternate functions include TRGIO, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC1_D123DIR, FMC_NE1, SDMMC1/2_D7, SWPMI_TX, LCD_G6. |+| 39 | PC9 | bidirectional | 5 V-tolerant I2C FM+ GPIO; alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, OCTOSPIM_P1_IO0, SWPMI_SUSPEND, SDMMC1_D1, LCD_G3/B2. |+| 40 | PA8 | bidirectional | 5 V-tolerant I2C FM+ GPIO; alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_HS_SOF, UART7_RX, LCD_B3/R6. |+| 41 | PA9 | bidirectional | 5 V-tolerant USB-domain GPIO with OTG_HS_VBUS additional function; alternate functions include TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK, USART1_TX, DCMI_D0, LCD_R5. |+| 42 | PA10 | bidirectional | 5 V-tolerant USB-domain GPIO; alternate functions include TIM1_CH3, LPUART1_RX, USART1_RX, OTG_HS_ID, MDIOS_MDIO, DCMI_D1/PSSI_D1, LCD_B4/B1. |+| 43 | PA11 | bidirectional | 5 V-tolerant USB-domain GPIO with OTG_HS_DM additional function; alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_NSS, UART4_RX, USART1_CTS/NSS, FDCAN1_RX, LCD_R4. |+| 44 | PA12 | bidirectional | 5 V-tolerant USB-domain GPIO with OTG_HS_DP additional function; alternate functions include TIM1_ETR, LPUART1_RTS, SPI2_SCK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX, LCD_R5. |+| 45 | PA13 | bidirectional | 5 V-tolerant GPIO; default function JTMS/SWDIO (pulled up after reset); only alternate function is EVENTOUT; do not leave unconnected if SWD is used. |+| 46 | VCAP | passive | Second internal LDO VCORE output pin; connect 2.2 µF low-ESR ceramic capacitor to VSS; both VCAP pins (30 and 46) must be populated. |+| 47 | VSS | power_in | Digital ground. |+| 48 | VDD | power_in | Main digital supply, 1.62-3.6 V; 100 nF decoupling capacitor required. |+| 49 | PA14 | bidirectional | 5 V-tolerant GPIO; default function JTCK/SWCLK (pulled down after reset); only alternate function is EVENTOUT; do not leave unconnected if SWD is used. |+| 50 | PA15 | bidirectional | 5 V-tolerant GPIO; default function JTDI (JTAG); alternate functions include TIM2_CH1/ETR, HDMI_CEC, SPI1/3/6_NSS, UART4_RTS, UART7_TX, LCD_R3/B6. |+| 51 | PC10 | bidirectional | 5 V-tolerant GPIO; alternate functions include DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPIM_P1_IO1, SWPMI_RX, SDMMC1_D2, DCMI_D8, LCD_B1/R2. |+| 52 | PC11 | bidirectional | 5 V-tolerant GPIO; alternate functions include DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPIM_P1_NCS, SDMMC1_D3, DCMI_D4/PSSI_D4, LCD_B4. |+| 53 | PC12 | bidirectional | 5 V-tolerant GPIO; alternate functions include TRACED3, TIM15_CH1, SPI3_MOSI/I2S3_SDO, SPI6_SCK, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9/PSSI_D9, LCD_R6. |+| 54 | PD2 | bidirectional | 5 V-tolerant GPIO; alternate functions include TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD, DCMI_D11/PSSI_D11, LCD_B7/B2. |+| 55 | PB3 | bidirectional | 5 V-tolerant GPIO; default function JTDO/TRACESWO; alternate functions include TIM2_CH2, SPI1/3/6_SCK, SDMMC2_D2, CRS_SYNC, UART7_RX. |+| 56 | PB4 | bidirectional | 5 V-tolerant GPIO; default function NJTRST (JTAG TRST); alternate functions include TIM3_CH1, SPI1/2/3/6_MISO, SDMMC2_D3, UART7_TX. |+| 57 | PB5 | bidirectional | 5 V-tolerant GPIO; alternate functions include TIM3_CH2, I2C1/4_SMBA, SPI1/3/6_MOSI, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1, SDMMC2_D5, LCD_B5, UART5_RX. |+| 58 | PB6 | bidirectional | 5 V-tolerant I2C FM+ GPIO; alternate functions include TIM4_CH1, I2C1/4_SCL, HDMI_CEC, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPIM_P1_NCS, FMC_SDNE1, UART5_TX. |+| 59 | PB7 | bidirectional | 5 V-tolerant I2C FM+ analog GPIO with PVD_IN additional function; alternate functions include TIM4_CH2, I2C1/4_SDA, USART1_RX, LPUART1_RX, DFSDM1_CKIN5, FMC_NL, DCMI_VSYNC. |+| 60 | BOOT0 | input | Dedicated boot-mode selection input (B-type, 0-9 V tolerant per Table 17); selects boot source at reset; also serves as VPP for Flash programming. |+| 61 | PB8 | bidirectional | 5 V-tolerant I2C FM+ GPIO with SDMMC secondary supply (_s); alternate functions include TIM4_CH3, I2C1/4_SCL, SDMMC1_CKIN/D4, UART4_RX, FDCAN1_RX, SDMMC2_D4, LCD_B6. |+| 62 | PB9 | bidirectional | 5 V-tolerant I2C FM+ GPIO with SDMMC secondary supply (_s); alternate functions include TIM4_CH4, I2C1/4_SDA, SPI2_NSS/I2S2_WS, SDMMC1_CDIR/D5, UART4_TX, FDCAN1_TX, SDMMC2_D5, LCD_B7. |+| 63 | VSS | power_in | Digital ground. |+| 64 | VDD | power_in | Main digital supply, 1.62-3.6 V; 100 nF decoupling capacitor required. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM32H7B0RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm32h7b0rbt6-etched.step` / `stm32h7b0rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32h7b0rbt6.step` / `stm32h7b0rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886275218944000) (202 pp, sha256 `eeb37a566bb0f97e`, retrieved 2026-09-25, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32h7b0rbt6-datasheet.pdf)
page.jsonadded+493@@ -0,0 +1,493 @@+{+ "slug": "stm32h7b0rbt6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32h7b0rbt6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32h7b0rbt6.kicad_sym",+ "stm32h7b0rbt6.kicad_mod",+ "stm32h7b0rbt6.glb",+ "stm32h7b0rbt6.step",+ "stm32h7b0rbt6.lbr",+ "docs/hero.png",+ "docs/stm32h7b0rbt6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32H7B0RBT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886275218944000",+ "parts": {+ "symbol": "stm32h7b0rbt6.kicad_sym",+ "footprint": "stm32h7b0rbt6.kicad_mod",+ "model_3d": "stm32h7b0rbt6-etched.glb",+ "model_3d_plain": "stm32h7b0rbt6.glb",+ "model_3d_step": "stm32h7b0rbt6-etched.step",+ "model_3d_step_plain": "stm32h7b0rbt6.step",+ "lbr": "stm32h7b0rbt6.lbr"+ },+ "distributor_links": {+ "lcsc": "C730226",+ "digikey": "497-STM32H7B0RBT6-ND",+ "mouser": "511-STM32H7B0RBT6"+ },+ "distributor_check": {+ "checked_at": "2026-09-25T14:57:27Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-STM32H7B0RBT6-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32H7B0RBT6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup domain supply for RTC, LSE oscillator and backup registers; 1.62-3.6 V."+ },+ {+ "number": "2",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; additional functions TAMP_IN1/OUT2/OUT3, RTC_OUT1/TS, WKUP2; floating input after reset."+ },+ {+ "number": "3",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; serves as LSE oscillator input (OSC32_IN) when 32.768 kHz crystal is used; floating input after reset."+ },+ {+ "number": "4",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; serves as LSE oscillator output (OSC32_OUT) when 32.768 kHz crystal is used; floating input after reset."+ },+ {+ "number": "5",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; serves as HSE oscillator input (OSC_IN) for external 4-50 MHz crystal; floating input after reset."+ },+ {+ "number": "6",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; serves as HSE oscillator output (OSC_OUT); floating input after reset."+ },+ {+ "number": "7",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Active-low bidirectional reset pin with embedded weak pull-up resistor; minimum valid reset pulse width 100 µs."+ },+ {+ "number": "8",+ "name": "PC0",+ "type": "bidirectional",+ "description": "5 V-tolerant analog GPIO with ADC12_INP10; alternate functions include DFSDM1_CKIN0, SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, LCD_G2/R5."+ },+ {+ "number": "9",+ "name": "PC1",+ "type": "bidirectional",+ "description": "5 V-tolerant analog GPIO with ADC12_INP11/INN10; alternate functions include TRACED0, SPI2_MOSI/I2S2_SDO, SAI1_SD_A, SDMMC2_CK, OCTOSPIM_P1_IO4, MDIOS_MDC."+ },+ {+ "number": "10",+ "name": "PC2",+ "type": "bidirectional",+ "description": "5 V-tolerant analog GPIO with ADC12_INP12, PWR_CSTOP; alternate functions include SPI2_MISO/I2S2_SDI, DFSDM1_CKOUT, OCTOSPIM_P1_IO2/IO5, FMC_SDNE0."+ },+ {+ "number": "11",+ "name": "PC3",+ "type": "bidirectional",+ "description": "5 V-tolerant analog GPIO with ADC12_INP13, PWR_CSLEEP; alternate functions include SPI2_MOSI/I2S2_SDO, OCTOSPIM_P1_IO0/IO6, FMC_SDCKE0."+ },+ {+ "number": "12",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground reference for ADC, DAC, COMP, and OPAMP; must be connected to the same potential as VSS with filtering capacitors."+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply for ADC/DAC/COMP/OPAMP/VREFBUF; 1.62-3.6 V (min 1.8 V for DAC and VREFBUF, 2.0 V for OPAMP); no separate VREF+ in this package."+ },+ {+ "number": "14",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5 V-tolerant analog GPIO with ADC1_INP16, WKUP0; alternate functions include TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, UART4_TX, SDMMC2_CMD, SAI2_SD_B."+ },+ {+ "number": "15",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with ADC1_INP17; alternate functions include TIM2_CH2, TIM5_CH2, LPTIM3_OUT, USART2_RTS, UART4_RX, OCTOSPIM_P1_IO3/DQS, SAI2_MCK_B, LCD_R2."+ },+ {+ "number": "16",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5 V-tolerant analog GPIO with ADC1_INP14, WKUP1; alternate functions include TIM2_CH3, TIM5_CH3, TIM15_CH1, USART2_TX, SAI2_SCK_B, MDIOS_MDIO, LCD_R1."+ },+ {+ "number": "17",+ "name": "PA3",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with ADC1_INP15; alternate functions include TIM2_CH4, TIM5_CH4, OCTOSPIM_P1_CLK, TIM15_CH2, USART2_RX, OTG_HS_ULPI_D0, LCD_B2/B5."+ },+ {+ "number": "18",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground; each VSS pin must be decoupled with 100 nF capacitor on the adjacent VDD pin."+ },+ {+ "number": "19",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply, 1.62-3.6 V; 100 nF decoupling capacitor required on each VDD pin per AN5307."+ },+ {+ "number": "20",+ "name": "PA4",+ "type": "bidirectional",+ "description": "3.3 V-tolerant analog GPIO with ADC1_INP18, DAC1_OUT1; alternate functions include TIM5_ETR, SPI1/3/6_NSS/I2Sx_WS, USART2_CK, DCMI_HSYNC/PSSI_DE, LCD_VSYNC."+ },+ {+ "number": "21",+ "name": "PA5",+ "type": "bidirectional",+ "description": "3.3 V-tolerant GPIO with ADC1_INP19, DAC1_OUT2, PWR_NDSTOP2; alternate functions include TIM2_CH1/ETR, TIM8_CH1N, SPI1/6_SCK, OTG_HS_ULPI_CK, LCD_R4."+ },+ {+ "number": "22",+ "name": "PA6",+ "type": "bidirectional",+ "description": "3.3 V-tolerant GPIO with ADC12_INP3, DAC2_OUT1; alternate functions include TIM1/8_BKIN, TIM3_CH1, SPI1/6_MISO, OCTOSPIM_P1_IO3, TIM13_CH1, MDIOS_MDC, LCD_G2."+ },+ {+ "number": "23",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5 V-tolerant analog GPIO with ADC12_INP7, OPAMP1_VINM; alternate functions include TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1/6_MOSI, TIM14_CH1, OCTOSPIM_P1_IO2, LCD_VSYNC."+ },+ {+ "number": "24",+ "name": "PC4",+ "type": "bidirectional",+ "description": "5 V-tolerant analog GPIO with ADC12_INP4, OPAMP1_VOUT, COMP1_INM; alternate functions include DFSDM1_CKIN2, I2S1_MCK, SPDIFRX1_IN2, FMC_SDNE0, LCD_R7."+ },+ {+ "number": "25",+ "name": "PC5",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with ADC12_INP8, OPAMP1_VINM; alternate functions include SAI1_D3, DFSDM1_DATIN2, SPDIFRX1_IN3, OCTOSPIM_P1_DQS, FMC_SDCKE0, COMP1_OUT, LCD_DE."+ },+ {+ "number": "26",+ "name": "PB0",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with ADC12_INP9, OPAMP1_VINP, COMP1_INP; alternate functions include TIM1/3/8 CH2N/CH3/CH2N, UART4_CTS, OTG_HS_ULPI_D1, OCTOSPIM_P1_IO1, LCD_R3/G1."+ },+ {+ "number": "27",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with ADC12_INP5, COMP1_INM; alternate functions include TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, OTG_HS_ULPI_D2, OCTOSPIM_P1_IO0, LCD_R6/G0."+ },+ {+ "number": "28",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with COMP1_INP; alternate functions include RTC_OUT2, SAI1_D1/SD_A, DFSDM1_CKIN1, SPI3_MOSI/I2S3_SDO, OCTOSPIM_P1_CLK/DQS."+ },+ {+ "number": "29",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V-tolerant I2C FM+ GPIO; alternate functions include TIM2_CH3, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, OCTOSPIM_P1_NCS, OTG_HS_ULPI_D3, LCD_G4."+ },+ {+ "number": "30",+ "name": "VCAP",+ "type": "passive",+ "description": "Internal LDO core voltage output (VCORE 0.95-1.35 V depending on VOS0-VOS3); connect 2.2 µF low-ESR ceramic capacitor to VSS."+ },+ {+ "number": "31",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "32",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply, 1.62-3.6 V; 100 nF decoupling capacitor required."+ },+ {+ "number": "33",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include TIM1_BKIN, OCTOSPIM_P1_NCLK, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5, DFSDM2_DATIN1, UART5_RX."+ },+ {+ "number": "34",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS/NSS, FDCAN2_TX, OTG_HS_ULPI_D6, SDMMC1_D0, UART5_TX."+ },+ {+ "number": "35",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include TIM1_CH2N, TIM12_CH1, TIM8_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0, LCD_CLK."+ },+ {+ "number": "36",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO, DFSDM1_CKIN2, SDMMC2_D1, LCD_G7."+ },+ {+ "number": "37",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO with SWPMI_IO additional function; alternate functions include TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDMMC1_D0DIR, FMC_NWAIT, SDMMC1/2_D6, LCD_HSYNC."+ },+ {+ "number": "38",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include TRGIO, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC1_D123DIR, FMC_NE1, SDMMC1/2_D7, SWPMI_TX, LCD_G6."+ },+ {+ "number": "39",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5 V-tolerant I2C FM+ GPIO; alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, OCTOSPIM_P1_IO0, SWPMI_SUSPEND, SDMMC1_D1, LCD_G3/B2."+ },+ {+ "number": "40",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V-tolerant I2C FM+ GPIO; alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_HS_SOF, UART7_RX, LCD_B3/R6."+ },+ {+ "number": "41",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V-tolerant USB-domain GPIO with OTG_HS_VBUS additional function; alternate functions include TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK, USART1_TX, DCMI_D0, LCD_R5."+ },+ {+ "number": "42",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V-tolerant USB-domain GPIO; alternate functions include TIM1_CH3, LPUART1_RX, USART1_RX, OTG_HS_ID, MDIOS_MDIO, DCMI_D1/PSSI_D1, LCD_B4/B1."+ },+ {+ "number": "43",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V-tolerant USB-domain GPIO with OTG_HS_DM additional function; alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_NSS, UART4_RX, USART1_CTS/NSS, FDCAN1_RX, LCD_R4."+ },+ {+ "number": "44",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V-tolerant USB-domain GPIO with OTG_HS_DP additional function; alternate functions include TIM1_ETR, LPUART1_RTS, SPI2_SCK, UART4_TX, USART1_RTS, SAI2_FS_B, FDCAN1_TX, LCD_R5."+ },+ {+ "number": "45",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; default function JTMS/SWDIO (pulled up after reset); only alternate function is EVENTOUT; do not leave unconnected if SWD is used."+ },+ {+ "number": "46",+ "name": "VCAP",+ "type": "passive",+ "description": "Second internal LDO VCORE output pin; connect 2.2 µF low-ESR ceramic capacitor to VSS; both VCAP pins (30 and 46) must be populated."+ },+ {+ "number": "47",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "48",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply, 1.62-3.6 V; 100 nF decoupling capacitor required."+ },+ {+ "number": "49",+ "name": "PA14",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; default function JTCK/SWCLK (pulled down after reset); only alternate function is EVENTOUT; do not leave unconnected if SWD is used."+ },+ {+ "number": "50",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; default function JTDI (JTAG); alternate functions include TIM2_CH1/ETR, HDMI_CEC, SPI1/3/6_NSS, UART4_RTS, UART7_TX, LCD_R3/B6."+ },+ {+ "number": "51",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPIM_P1_IO1, SWPMI_RX, SDMMC1_D2, DCMI_D8, LCD_B1/R2."+ },+ {+ "number": "52",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPIM_P1_NCS, SDMMC1_D3, DCMI_D4/PSSI_D4, LCD_B4."+ },+ {+ "number": "53",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include TRACED3, TIM15_CH1, SPI3_MOSI/I2S3_SDO, SPI6_SCK, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9/PSSI_D9, LCD_R6."+ },+ {+ "number": "54",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD, DCMI_D11/PSSI_D11, LCD_B7/B2."+ },+ {+ "number": "55",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; default function JTDO/TRACESWO; alternate functions include TIM2_CH2, SPI1/3/6_SCK, SDMMC2_D2, CRS_SYNC, UART7_RX."+ },+ {+ "number": "56",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; default function NJTRST (JTAG TRST); alternate functions include TIM3_CH1, SPI1/2/3/6_MISO, SDMMC2_D3, UART7_TX."+ },+ {+ "number": "57",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5 V-tolerant GPIO; alternate functions include TIM3_CH2, I2C1/4_SMBA, SPI1/3/6_MOSI, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1, SDMMC2_D5, LCD_B5, UART5_RX."+ },+ {+ "number": "58",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V-tolerant I2C FM+ GPIO; alternate functions include TIM4_CH1, I2C1/4_SCL, HDMI_CEC, USART1_TX, LPUART1_TX, FDCAN2_TX, OCTOSPIM_P1_NCS, FMC_SDNE1, UART5_TX."+ },+ {+ "number": "59",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V-tolerant I2C FM+ analog GPIO with PVD_IN additional function; alternate functions include TIM4_CH2, I2C1/4_SDA, USART1_RX, LPUART1_RX, DFSDM1_CKIN5, FMC_NL, DCMI_VSYNC."+ },+ {+ "number": "60",+ "name": "BOOT0",+ "type": "input",+ "description": "Dedicated boot-mode selection input (B-type, 0-9 V tolerant per Table 17); selects boot source at reset; also serves as VPP for Flash programming."+ },+ {+ "number": "61",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V-tolerant I2C FM+ GPIO with SDMMC secondary supply (_s); alternate functions include TIM4_CH3, I2C1/4_SCL, SDMMC1_CKIN/D4, UART4_RX, FDCAN1_RX, SDMMC2_D4, LCD_B6."+ },+ {+ "number": "62",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V-tolerant I2C FM+ GPIO with SDMMC secondary supply (_s); alternate functions include TIM4_CH4, I2C1/4_SDA, SPI2_NSS/I2S2_WS, SDMMC1_CDIR/D5, UART4_TX, FDCAN1_TX, SDMMC2_D5, LCD_B7."+ },+ {+ "number": "63",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground."+ },+ {+ "number": "64",+ "name": "VDD",+ "type": "power_in",+ "description": "Main digital supply, 1.62-3.6 V; 100 nF decoupling capacitor required."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: VCAP pins (25, 34) are marked as passive type per KiCad ERC classification; datasheet describes them; Dual VCAP pins in 64-pin package suggest separate decoupling for regulator stability; verify PCB lay"+ ],+ "pages_sent": 69,+ "cost_usd": 1.6293,+ "at": "2026-09-25T14:56:51"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886275218944000",+ "pages": 202,+ "sha256": "eeb37a566bb0f97e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}