3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32H7A3RIT6
STMicroelectronics · ST Microelectronics · LQFP-64(10x10)
STM32H7A3RIT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup operating supply for the RTC, LSE and backup domain, specified from 1.2 V to 3.6 V. |
| 2 | PC13 | bidirectional | 5 V tolerant FT I/O with EVENTOUT; additional functions TAMP_IN1/TAMP_OUT2/TAMP_OUT3, RTC_OUT1/RTC_TS and WKUP3. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant FT I/O with EVENTOUT; also serves as the LSE oscillator input OSC32_IN. |
| 4 | PC15-OSC32_OUT | bidirectional | 5 V tolerant FT I/O with EVENTOUT; also serves as the LSE oscillator output OSC32_OUT. |
| 5 | PH0-OSC_IN | bidirectional | 5 V tolerant FT I/O with EVENTOUT; also serves as the HSE oscillator input OSC_IN. |
| 6 | PH1-OSC_OUT | bidirectional | 5 V tolerant FT I/O with EVENTOUT; also serves as the HSE oscillator output OSC_OUT. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | FT_a I/O with analog option supplied by VDDA; additional function ADC12_INP10. |
| 9 | PC1 | bidirectional | FT_ah0 I/O; additional functions ADC12_INP11, ADC12_INN10, TAMP_IN3 and WKUP6; alternate SDMMC2_CK and SAI1_SD_A. |
| 10 | PC2 | bidirectional | FT_a I/O; additional functions ADC12_INP12 and ADC12_INN11; alternate SPI2_MISO/I2S2_SDI and OTG_HS_ULPI_DIR. |
| 11 | PC3 | bidirectional | FT_a I/O; additional functions ADC12_INP13 and ADC12_INN12; alternate SPI2_MOSI/I2S2_SDO and OTG_HS_ULPI_NXT. |
| 12 | VSSA | power_in | Analog ground pin for the ADC, DAC, OPAMP and reference blocks. |
| 13 | VDDA | power_in | Analog supply pin; minimum 1.62 V when the ADC or COMP is used. |
| 14 | PA0 | bidirectional | FT_a I/O; additional functions ADC1_INP16 and WKUP1; alternate TIM2_CH1/TIM2_ETR. |
| 15 | PA1 | bidirectional | FT_ah1 I/O; additional functions ADC1_INP17 and ADC1_INN16; alternate TIM2_CH2 and USART2_RTS. |
| 16 | PA2 | bidirectional | FT_a I/O; additional functions ADC1_INP14 and WKUP2; alternate TIM2_CH3 and USART2_TX. |
| 17 | PA3 | bidirectional | FT_ah1 I/O; additional function ADC1_INP15; alternate TIM2_CH4 and USART2_RX. |
| 18 | VSS | power_in | Ground pin. |
| 19 | VDD | power_in | Standard operating voltage, 1.62 V to 3.6 V. |
| 20 | PA4 | bidirectional | TT_a I/O, 3.3 V tolerant; additional functions ADC1_INP18 and DAC1_OUT1. |
| 21 | PA5 | bidirectional | TT_ah0 I/O, 3.3 V tolerant; additional functions ADC1_INP19, ADC1_INN18 and DAC1_OUT2. |
| 22 | PA6 | bidirectional | TT_ah1 I/O, 3.3 V tolerant; additional functions ADC12_INP3 and DAC2_OUT1. |
| 23 | PA7 | bidirectional | FT_ah1 I/O; additional functions ADC12_INP7, ADC12_INN3 and OPAMP1_VINM. |
| 24 | PC4 | bidirectional | FT_a I/O; additional functions ADC12_INP4, OPAMP1_VOUT and COMP1_INM. |
| 25 | PC5 | bidirectional | FT_ah1 I/O; additional functions ADC12_INP8, ADC12_INN4 and OPAMP1_VINM. |
| 26 | PB0 | bidirectional | FT_ah0 I/O; additional functions ADC12_INP9, ADC12_INN5, OPAMP1_VINP and COMP1_INP. |
| 27 | PB1 | bidirectional | FT_ah0 I/O; additional functions ADC12_INP5 and COMP1_INM. |
| 28 | PB2 | bidirectional | FT_ah1 I/O; additional function COMP1_INP; alternate RTC_OUT2 and SAI1_D1. |
| 29 | PB10 | bidirectional | FT_f I/O; alternate functions TIM2_CH3 and I2C2_SCL. |
| 30 | VCAP | power_out | Internal core regulator output pin that requires an external decoupling capacitor. |
| 31 | VSS | power_in | Ground pin. |
| 32 | VDD | power_in | Standard operating voltage, 1.62 V to 3.6 V. |
| 33 | PB12 | bidirectional | FT_h1 I/O; alternate functions TIM1_BKIN and I2C2_SMBA. |
| 34 | PB13 | bidirectional | FT_h0 I/O; alternate functions TIM1_CH1N and USART3_CTS/USART3_NSS. |
| 35 | PB14 | bidirectional | FT_h0 I/O; alternate functions TIM1_CH2N and USART1_TX-related TIM12_CH1 and SPI2_MISO/I2S2_SDI. |
| 36 | PB15 | bidirectional | FT_h0 I/O; additional function RTC_REFIN; alternate functions TIM1_CH3N and USART1_RX. |
| 37 | PC6 | bidirectional | FT_h0 I/O; alternate functions TIM3_CH1 and TIM8_CH1. |
| 38 | PC7 | bidirectional | FT_h0 I/O; alternate functions TIM3_CH2 and TIM8_CH2. |
| 39 | PC9 | bidirectional | FT_fh0 I/O; alternate functions MCO2 and TIM3_CH4. |
| 40 | PA8 | bidirectional | FT_fh0 I/O; alternate functions MCO1 and TIM1_CH1. |
| 41 | PA9 | bidirectional | USB-option FT_u I/O; alternate functions TIM1_CH2 and USART1_TX; additional function OTG_HS_VBUS. |
| 42 | PA10 | bidirectional | USB-option FT_u I/O; alternate functions TIM1_CH3 and USART1_RX; additional function OTG_HS_ID. |
| 43 | PA11 | bidirectional | USB-option FT_u I/O; alternate functions TIM1_CH4 and USART1_CTS; additional function OTG_HS_DM. |
| 44 | PA12 | bidirectional | USB-option FT_u I/O; alternate functions TIM1_ETR and USART1_RTS; additional function OTG_HS_DP. |
| 45 | PA13 | bidirectional | FT I/O; serial-wire debug pin JTMS/SWDIO after reset. |
| 46 | VCAP | power_out | Internal core regulator output pin that requires an external decoupling capacitor. |
| 47 | VSS | power_in | Ground pin. |
| 48 | VDD | power_in | Standard operating voltage, 1.62 V to 3.6 V. |
| 49 | PA14 | bidirectional | FT I/O; serial-wire debug pin JTCK/SWCLK after reset. |
| 50 | PA15 | bidirectional | FT I/O; JTDI after reset; alternate function TIM2_CH1/TIM2_ETR. |
| 51 | PC10 | bidirectional | FT_h0 I/O; alternate functions DFSDM1_CKIN5 and USART3_TX. |
| 52 | PC11 | bidirectional | FT_h0 I/O; alternate functions DFSDM1_DATIN5 and USART3_RX. |
| 53 | PC12 | bidirectional | FT_h0 I/O; alternate functions TRACED3 and TIM15_CH1. |
| 54 | PD2 | bidirectional | FT_h0 I/O; alternate functions TRACED2 and TIM3_ETR. |
| 55 | PB3 | bidirectional | FT_h0 I/O; serial-wire trace pin JTDO/TRACESWO after reset; alternate TIM2_CH2. |
| 56 | PB4 | bidirectional | FT_h0 I/O; JTAG reset pin NJTRST after reset; alternate TIM16_BKIN. |
| 57 | PB5 | bidirectional | FT_h0 I/O; alternate functions TIM17_BKIN and TIM3_CH2. |
| 58 | PB6 | bidirectional | FT_f I/O; alternate functions TIM16_CH1N and I2C1_SCL. |
| 59 | PB7 | bidirectional | FT_fa I/O; additional function PVD_IN; alternate functions TIM17_CH1N and I2C1_SDA. |
| 60 | BOOT0 | input | Dedicated BOOT0 boot-mode input pin; input voltage up to 9.0 V. |
| 61 | PB8 | bidirectional | FT_fsh3 I/O; alternate functions TIM16_CH1 and I2C1_SCL. |
| 62 | PB9 | bidirectional | FT_fsh3 I/O; alternate functions TIM17_CH1 and I2C1_SDA. |
| 63 | VSS | power_in | Ground pin. |
| 64 | VDD | power_in | Standard operating voltage, 1.62 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDDX - VSS) | VDDX - VSS | -0.3 | 4 | V | Including VDD, VDDLDO, VDDSMPS, VDDA, VDD33USB, VDDMMC, VBAT, VREF+ | 80 | |
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | 80 | ||
| Input voltage on any other pins | VIN | -0.3 | 4 | V | 80 | ||
| Input voltage on BOOT0 pin | VIN | 9 | V | 80 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 620 | mA | 81 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 620 | mA | 81 | |||
| Maximum current into each VDD power pin (source) | IVDD | 100 | mA | 81 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS | 100 | mA | 81 | |||
| Output current sunk or sourced by any I/O and control pin | IIO | 20 | mA | 81 | |||
| Total output current sunk by sum of all I/Os and control pins | ΣI(PIN) | 140 | mA | 81 | |||
| Total output current sourced by sum of all I/Os and control pins | ΣI(PIN) | 140 | mA | 81 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 81 | ||
| Maximum junction temperature | TJmax | 130 | °C | Limited to 105 °C in VOS0 voltage range | 81 | ||
| Standard operating voltage | VDD | 1.62 | 3.6 | V | 82 | ||
| Analog operating voltage (ADC or COMP used) | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 82 | |
| Analog operating voltage (DAC used) | VDDA | 1.8 | V | DAC used | 82 | ||
| Backup operating voltage | VBAT | 1.2 | 3.6 | V | 82 | ||
| Ambient temperature for suffix 6 version | TA | -40 | 85 | °C | Maximum power dissipation | 82 | |
| Ambient temperature for suffix 6 version (low-power dissipation) | TA | -40 | 105 | °C | Low-power dissipation | 82 | |
| Junction temperature range | TJ | -40 | 105 | °C | VOS0 | 82 | |
| Junction temperature range | TJ | -40 | 130 | °C | VOS3, VOS2, VOS1 | 82 | |
| Internal core voltage VCORE (regulator ON) | VCORE | 1.25 | 1.3 | 1.35 | V | VOS0 (max frequency 280 MHz), internal regulator ON (LDO or SMPS) | 82 |
| Standard operating voltage min at VOS0 max frequency | VDD | 1.71 | V | VOS0, max 280 MHz, LDO/SMPS | 84 | ||
| CPU clock frequency (fCPU) | fCPU | 280 | MHz | VOS0 | 83 | ||
| HSE user external clock source frequency | fHSE_ext | 4 | 25 | 50 | MHz | External digital/analog clock | 105 |
| HSE oscillator frequency (crystal/resonator) | F | 4 | 50 | MHz | 107 | ||
| LSE user external clock source frequency | fLSE_ext | 32.768 | 1000 | kHz | External digital/analog clock | 106 | |
| HSI48 frequency | fHSI48 | 47.5 | 48 | 48.5 | MHz | VDD = 3.3 V, TJ = 30 °C | 109 |
| HSI frequency | fHSI | 63.7 | 64 | 64.3 | MHz | VDD = 3.3 V, TJ = 30 °C | 110 |
| CSI frequency | fCSI | 3.96 | 4 | 4.04 | MHz | VDD = 3.3 V, TJ = 30 °C | 110 |
| PLL input clock | fPLL_IN | 2 | 16 | MHz | Wide VCO frequency range | 111 | |
| POR/PDR power-on reset threshold | VPOR/PDR | 1.62 | 1.67 | 1.71 | V | Rising edge | 90 |
| POR/PDR power-down reset threshold | VPOR/PDR | 1.58 | 1.62 | 1.68 | V | Falling edge | 90 |
| Reset temporization after POR released | tRSTTEMPO | 377 | 550 | µs | 90 | ||
| Internal reference voltage VREFINT | VREFINT | 1.18 | 1.216 | 1.255 | V | -40 °C < TJ < 130 °C | 91 |
| Average temperature coefficient of VREFINT | Tcoeff | 20 | 70 | ppm/°C | 91 | ||
| Internal reference voltage spread over temperature range | ΔVREFINT | 5 | 15 | mV | -40 °C < TJ < 130 °C | 91 | |
| Standby mode wakeup time | tWUSTDBY | 257 | 330 | µs | Wakeup from Standby mode | 104 | |
| Supply current in Standby mode (max at 3.6 V, TJ = 25 °C) | IDD(Standby) | 3.3 | 4 | µA | IWDG OFF, Backup SRAM OFF, RTC & LSE OFF, 3.3 V typ; max at 3.6 V, TJ = 25 °C | 98 | |
| Supply current in Standby mode (max at 3.6 V, TJ = 130 °C) | IDD(Standby) | 57 | µA | IWDG OFF, Backup SRAM OFF, RTC & LSE OFF, max at 3.6 V, TJ = 130 °C | 98 | ||
| Supply current in Run mode, all peripherals disabled (typ LDO) | IDD | 69.5 | mA | VOS0, 280 MHz, code in ITCM, all peripherals disabled, LDO, TJ = 25 °C | 94 | ||
| Supply current in Run mode, all peripherals disabled (max) | IDD | 173 | mA | VOS0, 280 MHz, code in ITCM, all peripherals disabled, LDO, TJ = 130 °C | 94 | ||
| External capacitor CEXT for LDO enabled | CEXT | 2.2 | µF | LDO enabled, VCAPx pins | 85 | ||
| CEXT tolerance | CEXT | -20 | 20 | % | Variation of ±20% tolerated | 85 | |
| ESR of external VCAP capacitor | ESR | 100 | mΩ | ESR of external capacitor | 85 | ||
| Endurance of flash memory | NEND | 10 | kcycles | TJ = -40 to +130 °C | 113 | ||
| Data retention of flash memory | tRET | 30 | years | 1 kcycle at TA = 85 °C | 113 | ||
| Word program time (128 bits user area) | tprog | 20 | µs | 128 bits (user area) | 113 | ||
| Sector erase time (8 Kbytes) | tERASE8KB | 2.2 | ms | 113 |
CAD (KiCad official)
- Symbol:
STM32H7A3RIT6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32h7a3rit6-etched.step/stm32h7a3rit6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32h7a3rit6.step/stm32h7a3rit6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (237 pp, sha256
6360962dbdec77de, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).