3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32H735IGT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-176(24x24)
STM32H735IGT6 from STMicroelectronics, in a LQFP-176(24x24). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACECLK, SAI1_CK1, SPI4_SCK, FMC_A23. |
| 2 | PE3 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACED0, TIM15_BKIN, USART10_TX, FMC_A19. |
| 3 | PE4 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACED1, SAI1_D2, SPI4_NSS, FMC_A20, DCMI_D4/PSSI_D4. |
| 4 | PE5 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACED2, SAI1_CK2, TIM15_CH1, FMC_A21, DCMI_D6/PSSI_D6. |
| 5 | PE6 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACED3, TIM1_BKIN2, SAI1_D1, SPI4_MOSI, FMC_A22. |
| 6 | VSS | power_in | Ground supply pin (VSS), 0 V reference for all voltages. |
| 7 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 8 | VBAT | power_in | Backup domain supply for RTC and backup registers, 1.2 V to 3.6 V. |
| 9 | PC13 | bidirectional | FT I/O, 5 V tolerant; RTC_TAMP1/RTC_TS and WKUP4 additional functions, EVENTOUT. |
| 10 | PC14-OSC32_IN | bidirectional | FT I/O, 5 V tolerant; LSE oscillator input (OSC32_IN). |
| 11 | PC15-OSC32_OUT | bidirectional | FT I/O, 5 V tolerant; LSE oscillator output (OSC32_OUT). |
| 12 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 13 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 14 | VSSSMPS | power_in | Ground for the internal SMPS step-down converter. |
| 15 | VLXSMPS | power_out | SMPS step-down converter switching node output. |
| 16 | VDDSMPS | power_in | Supply for the internal SMPS step-down converter (VDDSMPS = VDD), 1.62 V to 3.6 V. |
| 17 | VFBSMPS | input | SMPS step-down converter feedback input. |
| 18 | PF0 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include I2C2_SDA, I2C5_SDA, OCTOSPIM_P2_IO0, FMC_A0. |
| 19 | PF1 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include I2C2_SCL, I2C5_SCL, OCTOSPIM_P2_IO1, FMC_A1. |
| 20 | PF2 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include I2C2_SMBA, OCTOSPIM_P2_IO2, FMC_A2. |
| 21 | PF3 | bidirectional | FT_ha I/O, 5 V tolerant with analog option (VDDA); ADC3_INP5 additional function. |
| 22 | PF4 | bidirectional | FT_ha I/O, 5 V tolerant with analog option (VDDA); ADC3_INN5 and ADC3_INP9 additional functions. |
| 23 | PF5 | bidirectional | FT_ha I/O, 5 V tolerant with analog option (VDDA); ADC3_INP4 additional function. |
| 24 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 25 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 26 | PF6 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM16_CH1, FDCAN3_RX, SPI5_NSS, ADC3_INN4. |
| 27 | PF7 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM17_CH1, FDCAN3_TX, SPI5_SCK, ADC3_INP3. |
| 28 | PF8 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM16_CH1N, SPI5_MISO, ADC3_INN3, ADC3_INP7. |
| 29 | PF9 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM17_CH1N, SPI5_MOSI, ADC3_INP2. |
| 30 | PF10 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM16_BKIN, SAI1_D3, PSSI_D15, ADC3_INN2, ADC3_INP6. |
| 31 | PH0-OSC_IN | bidirectional | FT I/O, 5 V tolerant; HSE oscillator input (OSC_IN). |
| 32 | PH1-OSC_OUT | bidirectional | FT I/O, 5 V tolerant; HSE oscillator output (OSC_OUT). |
| 33 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 34 | PC0 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include FMC_D12/FMC_AD12, DFSDM1_CKIN0, ADC123_INP10. |
| 35 | PC1 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TRACED0, SAI4_D1, SPI2_MOSI/I2S2_SDO, ETH_MDC, ADC123_INN10, ADC123_INP11. |
| 36 | PC2_C | passive | Pxy_C analog-switch pad (TT_a); analog-switch path to PC2, with electrical limits in Section 6; ADC3_INN1 and ADC3_INP0 additional functions. |
| 37 | PC3_C | passive | Pxy_C analog-switch pad (TT_a); analog-switch path to PC3, with electrical limits in Section 6; ADC3_INP1 additional function. |
| 38 | VSSA | power_in | Analog ground reference (VSSA). |
| 39 | VREF+ | power_in | Positive reference voltage input for ADC and DAC. |
| 40 | VDDA | power_in | Analog supply, 1.62 V to 3.6 V when ADC or COMP is used. |
| 41 | PA0 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM2_CH1/TIM2_ETR, USART2_CTS, ADC1_INP16, WKUP1. |
| 42 | PA1 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM2_CH2, USART2_RTS/USART2_DE, ETH_MII_RX_CLK, ADC1_INN16, ADC1_INP17. |
| 43 | PA2 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM2_CH3, USART2_TX, ETH_MDIO, ADC12_INP14, WKUP2. |
| 44 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 45 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 46 | PA3 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM2_CH4, I2S6_MCK, USART2_RX, ETH_MII_COL, ADC12_INP15. |
| 47 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 48 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 49 | PA4 | bidirectional | TT_ha I/O, 3.3 V tolerant with analog option; AFs include D1PWREN, SPI1_NSS/I2S1_WS, USART2_CK, FMC_D8, ADC12_INP18, DAC1_OUT1. |
| 50 | PA5 | bidirectional | TT_ha I/O, 3.3 V tolerant with analog option; AFs include D2PWREN, SPI1_SCK/I2S1_CK, OTG_HS_ULPI_CK, FMC_D9, ADC12_INP19, DAC1_OUT2. |
| 51 | PA6 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM1_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI, DCMI_PIXCLK, ADC12_INP3. |
| 52 | PA7 | bidirectional | TT_ha I/O, 3.3 V tolerant with analog option; AFs include TIM1_CH1N, SPI1_MOSI/I2S1_SDO, ETH_MII_RX_DV, ADC12_INN3, OPAMP1_VINM. |
| 53 | PC4 | bidirectional | TT_ha I/O, 3.3 V tolerant with analog option; AFs include FMC_A22, DFSDM1_CKIN2, I2S1_MCK, ADC12_INP4, OPAMP1_VOUT, COMP1_INM. |
| 54 | PC5 | bidirectional | TT_ha I/O, 3.3 V tolerant with analog option; AFs include PWR_SLEEP, SAI4_D3, SAI1_D3, DFSDM1_DATIN2, COMP1_OUT, ADC12_INN4, ADC12_INP8. |
| 55 | PB0 | bidirectional | TT_ha I/O, 3.3 V tolerant with analog option; AFs include TIM1_CH2N, TIM3_CH3, OCTOSPIM_P1_IO1, ADC12_INN5, ADC12_INP9, COMP1_INP. |
| 56 | PB1 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM1_CH3N, TIM3_CH4, OCTOSPIM_P1_IO0, ADC12_INP5, COMP1_INM. |
| 57 | PB2 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include RTC_OUT, SAI4_D1, SAI1_D1, SPI3_MOSI/I2S3_SDO, ETH_TX_ER, COMP1_INP. |
| 58 | PF11 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include SPI5_MOSI, OCTOSPIM_P1_NCLK, FMC_NRAS, DCMI_D12/PSSI_D12, ADC1_INP2. |
| 59 | PF12 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include OCTOSPIM_P2_DQS, FMC_A6, TIM24_CH2, ADC1_INN2, ADC1_INP6. |
| 60 | PF13 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include DFSDM1_DATIN6, I2C4_SMBA, FMC_A7, TIM24_CH3, ADC2_INP2. |
| 61 | PF14 | bidirectional | FT_fha I/O, 5 V tolerant with FM+ and analog options; AFs include DFSDM1_CKIN6, I2C4_SCL, FMC_A8, ADC2_INN2, ADC2_INP6. |
| 62 | PF15 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include I2C4_SDA, FMC_A9. |
| 63 | PG0 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include OCTOSPIM_P2_IO4, UART9_RX, FMC_A10. |
| 64 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 65 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 66 | PG1 | bidirectional | TT_h I/O, 3.3 V tolerant high-speed low-voltage; AFs include OCTOSPIM_P2_IO5, UART9_TX, FMC_A11, OPAMP2_VINM. |
| 67 | PE7 | bidirectional | TT_ha I/O, 3.3 V tolerant with analog option; AFs include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, FMC_D4, OPAMP2_VOUT, COMP2_INM. |
| 68 | PE8 | bidirectional | TT_ha I/O, 3.3 V tolerant with analog option; AFs include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, FMC_D5, COMP2_OUT, OPAMP2_VINM. |
| 69 | PE9 | bidirectional | TT_ha I/O, 3.3 V tolerant with analog option; AFs include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS/UART7_DE, FMC_D6, OPAMP2_VINP, COMP2_INP. |
| 70 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 71 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 72 | PE10 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, FMC_D7, COMP2_INM. |
| 73 | PE11 | bidirectional | FT_ha I/O, 5 V tolerant with analog option; AFs include TIM1_CH2, DFSDM1_CKIN4, SPI4_NSS, SAI4_SD_B, FMC_D8, COMP2_INP. |
| 74 | PE12 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, FMC_D9, COMP1_OUT. |
| 75 | PE13 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, FMC_D10, COMP2_OUT. |
| 76 | PE14 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM1_CH4, SPI4_MOSI, SAI4_MCLK_B, FMC_D11, LCD_CLK. |
| 77 | PE15 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM1_BKIN, USART10_CK, FMC_D12, TIM1_BKIN_COMP12, LCD_R7. |
| 78 | PB10 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include TIM2_CH3, LPTIM2_IN1, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, ETH_MII_RX_ER. |
| 79 | PB11 | bidirectional | FT_f I/O, 5 V tolerant with FM+ option; AFs include TIM2_CH4, LPTIM2_ETR, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, ETH_MII_TX_EN. |
| 80 | VCAP | passive | External VCORE decoupling capacitor pin for the internal regulator. |
| 81 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 82 | VDDLDO | power_in | Supply for the internal LDO regulator (VDDLDO ≤ VDD), 1.62 V to 3.6 V. |
| 83 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 84 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 85 | PB12 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM1_BKIN, OCTOSPIM_P1_NCLK, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, FDCAN2_RX. |
| 86 | PB13 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS, FDCAN2_TX, SDMMC1_D0. |
| 87 | PB14 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM1_CH2N, TIM12_CH1, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, SDMMC2_D0. |
| 88 | PB15 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include RTC_REFIN, TIM1_CH3N, TIM12_CH2, USART1_RX, SPI2_MOSI/I2S2_SDO, SDMMC2_D1. |
| 89 | PD8 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include DFSDM1_CKIN3, USART3_TX, SPDIFRX1_IN2, FMC_D13. |
| 90 | PD9 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include DFSDM1_DATIN3, USART3_RX, FMC_D14. |
| 91 | PD10 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include DFSDM1_CKOUT, USART3_CK, FMC_D15, LCD_B3. |
| 92 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 93 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 94 | PD11 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include LPTIM2_IN2, I2C4_SMBA, USART3_CTS, OCTOSPIM_P1_IO0, FMC_A16. |
| 95 | PD12 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include LPTIM1_IN1, TIM4_CH1, LPTIM2_IN1, I2C4_SCL, FDCAN3_RX, FMC_A17. |
| 96 | PD13 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, FDCAN3_TX, FMC_A18. |
| 97 | PD14 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM4_CH3, UART8_CTS, UART9_RX, FMC_D0. |
| 98 | PD15 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM4_CH4, UART8_RTS/UART8_DE, UART9_TX, FMC_D1. |
| 99 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 100 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 101 | PJ8 | bidirectional | FT I/O, 5 V tolerant; AFs include TIM1_CH3N, TIM8_CH1, UART8_TX, LCD_G1. |
| 102 | PJ9 | bidirectional | FT I/O, 5 V tolerant; AFs include TIM1_CH3, TIM8_CH1N, UART8_RX, LCD_G2. |
| 103 | PJ10 | bidirectional | FT I/O, 5 V tolerant; AFs include TIM1_CH2N, TIM8_CH2, SPI5_MOSI, LCD_G3. |
| 104 | PJ11 | bidirectional | FT I/O, 5 V tolerant; AFs include TIM1_CH2, TIM8_CH2N, SPI5_MISO, LCD_G4. |
| 105 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 106 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 107 | PK0 | bidirectional | FT I/O, 5 V tolerant; AFs include TIM1_CH1N, TIM8_CH3, SPI5_SCK, LCD_G5. |
| 108 | PK1 | bidirectional | FT I/O, 5 V tolerant; AFs include TIM1_CH1, TIM8_CH3N, SPI5_NSS, LCD_G6. |
| 109 | PK2 | bidirectional | FT I/O, 5 V tolerant; AFs include TIM1_BKIN, TIM8_BKIN, TIM8_BKIN_COMP12, LCD_G7. |
| 110 | PG2 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM8_BKIN, FMC_A12, TIM24_ETR. |
| 111 | PG3 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM8_BKIN2, FMC_A13, TIM23_ETR. |
| 112 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 113 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 114 | PG4 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM1_BKIN2, FMC_A14/FMC_BA0. |
| 115 | PG5 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM1_ETR, FMC_A15/FMC_BA1. |
| 116 | PG6 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM17_BKIN, OCTOSPIM_P1_NCS, FMC_NE3, LCD_R7. |
| 117 | PG7 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include SAI1_MCLK_A, USART6_CK, FMC_INT, LCD_CLK. |
| 118 | PG8 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM8_ETR, SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK. |
| 119 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 120 | VDD50USB | power_in | USB regulator supply, 4 V to 5.5 V when the USB regulator is ON. |
| 121 | VDD33USB | power_in | USB domain supply, 3.0 V to 3.6 V when USB is used. |
| 122 | PC6 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, FMC_NWAIT, DCMI_D0/PSSI_D0. |
| 123 | PC7 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include DBTRGIO, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, FMC_NE1. |
| 124 | PC8 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, FMC_NE2, FMC_INT. |
| 125 | PC9 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2C5_SDA, UART5_CTS. |
| 126 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 127 | PA8 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_HS_SOF. |
| 128 | PA9 | bidirectional | FT_u I/O, USB option supplied by VDD33USB; AFs include TIM1_CH2, LPUART1_TX, I2C3_SMBA, USART1_TX, ETH_TX_ER, DCMI_D0. |
| 129 | PA10 | bidirectional | FT_u I/O, USB option supplied by VDD33USB; AFs include TIM1_CH3, LPUART1_RX, USART1_RX, OTG_HS_ID, MDIOS_MDIO. |
| 130 | PA11 | bidirectional | FT_u I/O, USB option supplied by VDD33USB; AFs include TIM1_CH4, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, FDCAN1_RX. |
| 131 | PA12 | bidirectional | FT_u I/O, USB option supplied by VDD33USB; AFs include TIM1_ETR, LPUART1_RTS, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, FDCAN1_TX. |
| 132 | PA13 | bidirectional | FT I/O, 5 V tolerant; JTMS/SWDIO debug function, EVENTOUT. |
| 133 | VCAP | passive | External VCORE decoupling capacitor pin for the internal regulator. |
| 134 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 135 | VDDLDO | power_in | Supply for the internal LDO regulator (VDDLDO ≤ VDD), 1.62 V to 3.6 V. |
| 136 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 137 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 138 | PA14 | bidirectional | FT I/O, 5 V tolerant; JTCK/SWCLK debug function, EVENTOUT. |
| 139 | PA15 | bidirectional | FT I/O, 5 V tolerant; JTDI debug function; AFs include TIM2_CH1, CEC, SPI1_NSS/I2S1_WS, UART4_RTS, LCD_R3. |
| 140 | PC10 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include DFSDM1_CKIN5, I2C5_SDA, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDMMC1_D2. |
| 141 | PC11 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include DFSDM1_DATIN5, I2C5_SCL, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, SDMMC1_D3. |
| 142 | PC12 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACED3, FMC_D6, TIM15_CH1, I2C5_SMBA, SPI6_SCK, USART3_CK, UART5_TX. |
| 143 | PD0 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include DFSDM1_CKIN6, UART4_RX, FDCAN1_RX, FMC_D2, LCD_B1. |
| 144 | PD1 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include DFSDM1_DATIN6, UART4_TX, FDCAN1_TX, FMC_D3. |
| 145 | PD2 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACED2, FMC_D7, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD. |
| 146 | PD3 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5. |
| 147 | PD4 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include USART2_RTS, OCTOSPIM_P1_IO4, FMC_NOE. |
| 148 | PD5 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include USART2_TX, OCTOSPIM_P1_IO5, FMC_NWE. |
| 149 | PD6 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include SAI4_D1, SAI1_D1, DFSDM1_CKIN4, SPI3_MOSI/I2S3_SDO, USART2_RX, FMC_NWAIT, DCMI_D10. |
| 150 | PD7 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN1, FMC_NE1. |
| 151 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 152 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 153 | PG9 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include FDCAN3_TX, SPI1_MISO/I2S1_SDI, USART6_RX, SAI4_FS_B, FMC_NE2, DCMI_VSYNC. |
| 154 | PG10 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include FDCAN3_RX, OCTOSPIM_P2_IO6, SPI1_NSS/I2S1_WS, LCD_G3, FMC_NE3, DCMI_D2. |
| 155 | PG11 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include LPTIM1_IN2, USART10_RX, SPI1_SCK/I2S1_CK, OCTOSPIM_P2_IO7, SDMMC2_D2, ETH_MII_TX_EN. |
| 156 | PG12 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include LPTIM1_IN1, OCTOSPIM_P2_NCS, USART10_TX, SPI6_MISO/I2S6_SDI, FMC_NE4, TIM23_CH1. |
| 157 | PG13 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACED0, LPTIM1_OUT, USART10_CTS, SPI6_SCK/I2S6_CK, SDMMC2_D6, FMC_A24, TIM23_CH2. |
| 158 | PG14 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TRACED1, LPTIM1_ETR, USART10_RTS, SPI6_MOSI/I2S6_SDO, USART6_TX, FMC_A25, TIM23_CH3. |
| 159 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 160 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
| 161 | PG15 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include USART6_CTS, OCTOSPIM_P2_DQS, USART10_CK, FMC_NCAS, DCMI_D13. |
| 162 | PB3 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; JTDO/TRACESWO debug function; AFs include TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, UART7_RX. |
| 163 | PB4 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; NJTRST debug function; AFs include TIM16_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI, UART7_TX. |
| 164 | PB5 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include TIM17_BKIN, TIM3_CH2, LCD_B5, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, FDCAN2_RX, FMC_SDCKE1. |
| 165 | PB6 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include TIM16_CH1N, TIM4_CH1, I2C1_SCL, CEC, USART1_TX, FDCAN2_TX, FMC_SDNE1. |
| 166 | PB7 | bidirectional | FT_fa I/O, 5 V tolerant with FM+ and analog option; AFs include TIM17_CH1N, TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL; PVD_IN additional function. |
| 167 | BOOT0 | input | Dedicated BOOT0 input pin, 0 to 9 V, with VPP additional function. |
| 168 | PB8 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, SDMMC1_CKIN, UART4_RX, FDCAN1_RX. |
| 169 | PB9 | bidirectional | FT_fh I/O, 5 V tolerant with FM+ option; AFs include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_NSS/I2S2_WS, UART4_TX, FDCAN1_TX. |
| 170 | PE0 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include LPTIM1_ETR, TIM4_ETR, LPTIM2_ETR, UART8_RX, FMC_NBL0, DCMI_D2. |
| 171 | PE1 | bidirectional | FT_h I/O, 5 V tolerant high-speed low-voltage; AFs include LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3. |
| 172 | VCAP | passive | External VCORE decoupling capacitor pin for the internal regulator. |
| 173 | VSS | power_in | Ground supply pin (VSS), 0 V reference. |
| 174 | PDR_ON | input | Power-down reset enable pin; the PDR can only be switched OFF through this pin, which is not available in all packages. |
| 175 | VDDLDO | power_in | Supply for the internal LDO regulator (VDDLDO ≤ VDD), 1.62 V to 3.6 V. |
| 176 | VDD | power_in | Standard operating supply pin (VDD), 1.62 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-176(24x24) |
| Category | Embedded Processors & Controllers |
| Pins | 176 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage | VDDX - VSS | -0.3 | 4 | V | Including VDD, VDDLDO, VDDSMPS, VDDA, VDD33USB, VBAT | 115 | |
| Input voltage on TT_xx pins | VIN | 4 | V | Input voltage on TT_xx pins | 115 | ||
| Input voltage on BOOT0 pin | VIN | 9 | V | Input voltage on BOOT0 pin | 115 | ||
| Input voltage on any other pins | VIN | -0.3 | 4 | V | Input voltage on any other pins | 115 | |
| Variations between different VDDX power pins of same domain | /ΔVDDX/ | 50 | mV | Variations between different VDDX power pins of the same domain | 115 | ||
| Variations between all ground pins | /VSSx-VSS/ | 50 | mV | Variations between all the different ground pins | 115 | ||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 620 | mA | 116 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 620 | mA | 116 | |||
| Maximum current into each VDD power pin (source) | IVDD | 100 | mA | 116 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS | 100 | mA | 116 | |||
| Output current sunk or sourced by any I/O and control pin | IIO | 20 | mA | Except Pxy_C | 116 | ||
| Output current sunk or sourced by Pxy_C pins | IIO | 1 | mA | Pxy_C pins | 116 | ||
| Total output current sunk by sum of all I/Os and control pins | ΣI(PIN) | 140 | mA | 116 | |||
| Total output current sourced by sum of all I/Os and control pins | ΣI(PIN) | 140 | mA | 116 | |||
| Injected current on FT_xxx, TT_xx, RST and B pins except PA4, PA5 | IINJ(PIN) | -5 | 0 | mA | Except PA4, PA5 | 116 | |
| Total injected current (sum of all I/Os and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | Absolute sum of positive and negative injected currents | 116 | |
| Storage temperature range | TSTG | -65 | 150 | °C | 116 | ||
| Maximum junction temperature | TJ | 125 | °C | Industrial temperature range 6 | 116 | ||
| Maximum junction temperature | TJ | 140 | °C | Extended industrial temperature range 3 | 116 | ||
| Standard operating voltage | VDD | 1.62 | 3.6 | V | 117 | ||
| Supply voltage for the internal regulator | VDDLDO | 1.62 | 3.6 | V | VDDLDO ≤ VDD | 117 | |
| Supply voltage for the internal SMPS step-down converter | VDDSMPS | 1.62 | 3.6 | V | VDDSMPS = VDD | 117 | |
| USB regulator supply voltage | VDD50USB | 4 | 5 | 5.5 | V | USB regulator ON | 117 |
| Standard operating voltage, USB domain | VDD33USB | 3 | 3.6 | V | USB used | 117 | |
| Analog operating voltage | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 117 | |
| Analog operating voltage | VDDA | 1.8 | 3.6 | V | DAC used | 117 | |
| Analog operating voltage | VDDA | 2 | 3.6 | V | OPAMP used | 117 | |
| Supply voltage for Backup domain | VBAT | 1.2 | 3.6 | V | 117 | ||
| I/O input voltage | BOOT0 | 0 | 9 | V | BOOT0 pin | 117 | |
| Arm Cortex-M7 clock frequency | fCPU | 520 | MHz | VOS0 | 118 | ||
| Arm Cortex-M7 clock frequency | fCPU | 550 | MHz | VOS0 and CPU_FREQ_BOOST | 118 | ||
| AHB clock frequency | fHCLK | 275 | MHz | VOS0 | 118 | ||
| Ambient temperature for temperature range 6 | TA | -40 | 85 | °C | Maximum power dissipation | 118 | |
| Ambient temperature for temperature range 3 | TA | -40 | 125 | °C | Maximum power dissipation | 118 | |
| SMPS output voltage | VDDSMPS | 2.3 | 3.6 | V | VOUT = 1.8 V | 121 | |
| SMPS output voltage | VDDSMPS | 3 | 3.6 | V | VOUT = 2.5 V | 121 | |
| SMPS output voltage | VOUT | 2.25 | 2.5 | 2.75 | V | Iout=600 mA | 121 |
| SMPS output voltage | VOUT | 1.62 | 1.8 | 1.98 | V | Iout=600 mA | 121 |
| SMPS output current | IOUT | 600 | mA | Internal and external usage | 121 | ||
| SMPS quiescent current | IDDSMPS_Q | 220 | µA | Quiescent current | 121 | ||
| Power-on/power-down reset threshold | VBOR0/POR/PDR | 1.62 | 1.67 | 1.71 | V | Rising edge | 125 |
| Power-on/power-down reset threshold | VBOR0/POR/PDR | 1.58 | 1.62 | 1.68 | V | Falling edge | 125 |
| Internal reference voltage | VREFINT | 1.18 | 1.216 | 1.255 | V | -40°C < TJ < TJmax | 126 |
CAD (KiCad official)
- Symbol:
STM32H735IGT6 - Footprint:
Package_QFP:LQFP-176_24x24mm_P0.5mm - 3D model: LQFP-176(24x24) (KiCad packages3D, STEP)
- 3D model files:
stm32h735igt6-etched.step/stm32h735igt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32h735igt6.step/stm32h735igt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (286 pp, sha256
48fc619b23cdb3e0, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).