component
STM32H725VET6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+136@@ -0,0 +1,136 @@+# STM32H725VET6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)++STM32H725VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | 5 V-tolerant (FT_h) I/O; alternate functions include TRACECLK, SAI1_CK1, USART10_RX, SPI4_SCK and FMC_A23. |+| 2 | PE4 | bidirectional | 5 V-tolerant (FT_h) I/O; alternate functions include TRACED1, SAI1_D2, SPI4_NSS, FMC_A20 and DCMI_D4/PSSI_D4. |+| 3 | PE5 | bidirectional | 5 V-tolerant (FT_h) I/O; alternate functions include TRACED2, SAI1_CK2, SPI4_MISO, FMC_A21 and DCMI_D6/PSSI_D6. |+| 4 | VDD | power_in | Standard digital supply; VDD operating range is 1.62 V to 3.6 V (Table 13). |+| 5 | VBAT | power_in | Backup-domain supply for the RTC and the 32x32-bit backup registers. |+| 6 | PC13 | bidirectional | 5 V-tolerant (FT) I/O; additional functions RTC_TAMP1/RTC_TS and WKUP4. |+| 7 | PC14-OSC32_IN | bidirectional | 5 V-tolerant (FT) I/O; OSC32_IN input for the 32.768 kHz LSE crystal. |+| 8 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant (FT) I/O; OSC32_OUT output for the 32.768 kHz LSE crystal. |+| 9 | VSSSMPS | power_in | Ground of the internal SMPS step-down converter. |+| 10 | VLXSMPS | power_out | Switching node of the internal SMPS step-down converter. |+| 11 | VDDSMPS | power_in | Supply of the internal SMPS step-down converter; VDDSMPS = VDD, 1.62 V to 3.6 V (Table 13). |+| 12 | VFBSMPS | power_in | Feedback input of the internal SMPS step-down converter. |+| 13 | PH0-OSC_IN | bidirectional | 5 V-tolerant (FT) I/O; OSC_IN input for the 4-50 MHz HSE oscillator. |+| 14 | PH1-OSC_OUT | bidirectional | 5 V-tolerant (FT) I/O; OSC_OUT output for the 4-50 MHz HSE oscillator. |+| 15 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |+| 16 | PC0 | bidirectional | 5 V-tolerant (FT_ha) I/O with analog option supplied by VDDA; ADC123_INP10 input; alternate functions include FMC_D12/FMC_AD12 and OTG_HS_ULPI_STP. |+| 17 | PC1 | bidirectional | 5 V-tolerant (FT_ha) I/O with analog option; ADC123_INN10/ADC123_INP11, RTC_TAMP3 and WKUP6; alternate functions include SPI2_MOSI/I2S2_SDO and ETH_MDC. |+| 18 | PC2_C | passive | 3.3 V-tolerant analog-capable pin (TT_a, analog option supplied by VDDA); ADC3_INN1 and ADC3_INP0 inputs. |+| 19 | PC3_C | passive | 3.3 V-tolerant analog-capable pin (TT_a, analog option supplied by VDDA); ADC3_INP1 input. |+| 20 | VDD | power_in | Standard digital supply; 1.62 V to 3.6 V (Table 13). |+| 21 | VSS | power_in | Ground. |+| 22 | VSSA | power_in | Analog ground. |+| 23 | VREF+ | power_in | Positive reference voltage pin for the analog peripherals. |+| 24 | VDDA | power_in | Analog supply; 1.62 V to 3.6 V when the ADC or COMP is used (Table 13). |+| 25 | PA0 | bidirectional | 5 V-tolerant (FT_ha) I/O with analog option; ADC1_INP16 and WKUP1; alternate functions include TIM2_CH1/TIM2_ETR, USART2_CTS and SDMMC2_CMD. |+| 26 | PA1 | bidirectional | 5 V-tolerant (FT_ha) I/O with analog option; ADC1_INN16/ADC1_INP17; alternate functions include TIM2_CH2, USART2_RTS/USART2_DE and ETH_MII_RX_CLK. |+| 27 | PA2 | bidirectional | 5 V-tolerant (FT_ha) I/O with analog option; ADC12_INP14 and WKUP2; alternate functions include TIM2_CH3, USART2_TX(boot) and ETH_MDIO. |+| 28 | PA3 | bidirectional | 5 V-tolerant (FT_ha) I/O with analog option; ADC12_INP15; alternate functions include TIM2_CH4, USART2_RX(boot) and OTG_HS_ULPI_D0. |+| 29 | VSS | power_in | Ground. |+| 30 | VDD | power_in | Standard digital supply; 1.62 V to 3.6 V (Table 13). |+| 31 | PA4 | bidirectional | 3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INP18 and DAC1_OUT1; alternate functions include SPI1_NSS(boot), USART2_CK and FMC_D8/FMC_AD8. |+| 32 | PA5 | bidirectional | 3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INN18/ADC12_INP19 and DAC1_OUT2; alternate functions include SPI1_SCK(boot), TIM2_CH1/TIM2_ETR and OTG_HS_ULPI_CK. |+| 33 | PA6 | bidirectional | 5 V-tolerant (FT_ha) I/O with analog option; ADC12_INP3; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO(boot) and DCMI_PIXCLK/PSSI_PDCK. |+| 34 | PA7 | bidirectional | 3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INN3, ADC12_INP7 and OPAMP1_VINM; alternate functions include TIM1_CH1N, SPI1_MOSI(boot) and ETH_MII_RX_DV. |+| 35 | PC4 | bidirectional | 3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INP4, OPAMP1_VOUT and COMP1_INM; alternate functions include FMC_A22, I2S1_MCK and ETH_MII_RXD0. |+| 36 | PC5 | bidirectional | 3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INN4, ADC12_INP8 and OPAMP1_VINM; alternate functions include SAI1_D3, COMP1_OUT and ETH_MII_RXD1. |+| 37 | PB0 | bidirectional | 3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INN5, ADC12_INP9, OPAMP1_VINP and COMP1_INP; alternate functions include TIM1_CH2N, OCTOSPIM_P1_IO1 and ETH_MII_RXD2. |+| 38 | PB1 | bidirectional | 5 V-tolerant (FT_ha) I/O with analog option; ADC12_INP5 and COMP1_INM; alternate functions include TIM1_CH3N, OCTOSPIM_P1_IO0 and ETH_MII_RXD3. |+| 39 | PB2 | bidirectional | 5 V-tolerant (FT_ha) I/O with analog option; COMP1_INP; alternate functions include RTC_OUT, SAI1_D1 and ETH_TX_ER. |+| 40 | PE7 | bidirectional | 3.3 V-tolerant (TT_ha) I/O with analog option; OPAMP2_VOUT and COMP2_INM; alternate functions include TIM1_ETR, DFSDM1_DATIN2 and FMC_D4/FMC_AD4. |+| 41 | PE8 | bidirectional | 3.3 V-tolerant (TT_ha) I/O with analog option; OPAMP2_VINM; alternate functions include TIM1_CH1N, COMP2_OUT and FMC_D5/FMC_AD5. |+| 42 | PB10 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK and OTG_HS_ULPI_D3. |+| 43 | PB11 | bidirectional | 5 V-tolerant (FT_f) I/O with FM+ option; alternate functions include TIM2_CH4, I2C2_SDA and ETH_MII_TX_EN/ETH_RMII_TX_EN. |+| 44 | VCAP | power_in | Connection for the external capacitor of the core-supply regulator (see Table 15, VCAP operating conditions). |+| 45 | VSS | power_in | Ground. |+| 46 | VDDLDO | power_in | Supply voltage for the internal LDO regulator; VDDLDO ≤ VDD, 1.62 V to 3.6 V (Table 13). |+| 47 | VDD | power_in | Standard digital supply; 1.62 V to 3.6 V (Table 13). |+| 48 | PB12 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM1_BKIN, SPI2_NSS/I2S2_WS, USART3_CK and FDCAN2_RX. |+| 49 | PB13 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS and FDCAN2_TX. |+| 50 | PB14 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM1_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI and SDMMC2_D0. |+| 51 | PB15 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; RTC_REFIN; alternate functions include TIM1_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO and SDMMC2_D1. |+| 52 | PD8 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_CKIN3, USART3_TX(boot) and FMC_D13/FMC_AD13. |+| 53 | PD9 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_DATIN3, USART3_RX(boot) and FMC_D14/FMC_AD14. |+| 54 | PD10 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_CKOUT, USART3_CK, FMC_D15/FMC_AD15 and LCD_B3. |+| 55 | PD11 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS/USART3_NSS and FMC_A16/FMC_CLE. |+| 56 | PD12 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL and FMC_A17/FMC_ALE. |+| 57 | PD13 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA and FMC_A18. |+| 58 | VSS | power_in | Ground. |+| 59 | VDD | power_in | Standard digital supply; 1.62 V to 3.6 V (Table 13). |+| 60 | PD14 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_AD0. |+| 61 | PD15 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM4_CH4, UART8_RTS/UART8_DE, UART9_TX and FMC_D1/FMC_AD1. |+| 62 | PC6 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX and DCMI_D0/PSSI_D0. |+| 63 | PC7 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX and FMC_NE1. |+| 64 | PC8 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK and FMC_NE2/FMC_NCE. |+| 65 | PC9 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA(boot) and I2C5_SDA. |+| 66 | PA8 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL(boot), USART1_CK and OTG_HS_SOF. |+| 67 | PA9 | bidirectional | 5 V-tolerant (FT_u) I/O with USB option (supplied by VDD33USB); alternate functions include TIM1_CH2, LPUART1_TX, SPI2_SCK/I2S2_CK and USART1_TX(boot); additional function OTG_HS_VBUS. |+| 68 | PA10 | bidirectional | 5 V-tolerant (FT_u) I/O with USB option (supplied by VDD33USB); alternate functions include TIM1_CH3, LPUART1_RX, USART1_RX(boot) and MDIOS_MDIO; additional function OTG_HS_ID. |+| 69 | PA11 | bidirectional | 5 V-tolerant (FT_u) I/O with USB option (supplied by VDD33USB); alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX and FDCAN1_RX; additional function OTG_HS_DM(boot). |+| 70 | PA12 | bidirectional | 5 V-tolerant (FT_u) I/O with USB option (supplied by VDD33USB); alternate functions include TIM1_ETR, LPUART1_RTS/LPUART1_DE, UART4_TX and FDCAN1_TX; additional function OTG_HS_DP(boot). |+| 71 | PA13(JTMS/SWDIO) | bidirectional | 5 V-tolerant (FT) I/O; JTMS/SWDIO serial-wire debug data pin. |+| 72 | VCAP | power_in | Connection for the external capacitor of the core-supply regulator (see Table 15, VCAP operating conditions). |+| 73 | VSS | power_in | Ground. |+| 74 | VDDLDO | power_in | Supply voltage for the internal LDO regulator; VDDLDO ≤ VDD, 1.62 V to 3.6 V (Table 13). |+| 75 | VDD | power_in | Standard digital supply; 1.62 V to 3.6 V (Table 13). |+| 76 | VDD33USB | power_in | Supply of the USB domain; 3.0 V to 3.6 V when USB is used, 0 to 3.6 V when USB is not used (Table 13). |+| 77 | PA14(JTCK/SWCLK) | bidirectional | 5 V-tolerant (FT) I/O; JTCK/SWCLK serial-wire debug clock pin. |+| 78 | PA15(JTDI) | bidirectional | 5 V-tolerant (FT) I/O; JTDI debug data input; alternate functions include TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS and UART4_RTS/UART4_DE. |+| 79 | PC10 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include DFSDM1_CKIN5, I2C5_SDA, SPI3_SCK/I2S3_CK, USART3_TX and UART4_TX. |+| 80 | PC11 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include DFSDM1_DATIN5, I2C5_SCL, SPI3_MISO(boot)/I2S3_SDI, USART3_RX and UART4_RX. |+| 81 | PC12 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TRACED3, FMC_D6/FMC_AD6, TIM15_CH1, UART5_TX and SDMMC1_CK. |+| 82 | PD0 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_CKIN6, UART4_RX, FDCAN1_RX(boot) and FMC_D2/FMC_AD2. |+| 83 | PD1 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_DATIN6, UART4_TX, FDCAN1_TX(boot) and FMC_D3/FMC_AD3. |+| 84 | PD2 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TRACED2, FMC_D7/FMC_AD7, TIM3_ETR, TIM15_BKIN, UART5_RX and SDMMC1_CMD. |+| 85 | PD3 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS and FMC_CLK. |+| 86 | PD4 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include USART2_RTS/USART2_DE, OCTOSPIM_P1_IO4 and FMC_NOE. |+| 87 | PD5 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include USART2_TX, OCTOSPIM_P1_IO5 and FMC_NWE. |+| 88 | VDD | power_in | Standard digital supply; 1.62 V to 3.6 V (Table 13). |+| 89 | PB3(JTDO/TRACESWO) | bidirectional | 5 V-tolerant (FT_h) I/O; JTDO/TRACESWO trace/debug output; alternate functions include TIM2_CH2, SPI1_SCK/I2S1_CK and SPI3_SCK/I2S3_CK. |+| 90 | PB4(NJTRST) | bidirectional | 5 V-tolerant (FT_h) I/O; NJTRST JTAG reset pin; alternate functions include TIM16_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI and SPI3_MISO/I2S3_SDI. |+| 91 | PB5 | bidirectional | 5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM17_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SDO and FDCAN2_RX. |+| 92 | PB6 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL(boot), CEC and USART1_TX. |+| 93 | PB7 | bidirectional | 5 V-tolerant (FT_fa) I/O with FM+ and analog options; additional function PVD_IN; alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA and USART1_RX. |+| 94 | BOOT0 | input | Dedicated BOOT0 pin; input voltage range 0 V to 9 V (Table 13); additional function VPP. |+| 95 | PB8 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include TIM16_CH1, TIM4_CH3, I2C1_SCL, FDCAN1_RX and SDMMC1_D4. |+| 96 | PB9 | bidirectional | 5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include TIM17_CH1, TIM4_CH4, I2C1_SDA(boot), SPI2_NSS/I2S2_WS and FDCAN1_TX. |+| 97 | VCAP | power_in | Connection for the external capacitor of the core-supply regulator (see Table 15, VCAP operating conditions). |+| 98 | VSS | power_in | Ground. |+| 99 | VDDLDO | power_in | Supply voltage for the internal LDO regulator; VDDLDO ≤ VDD, 1.62 V to 3.6 V (Table 13). |+| 100 | VDD | power_in | Standard digital supply; 1.62 V to 3.6 V (Table 13). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-100(14x14) |+| Category | Embedded Processors & Controllers |+| Pins | 100 |++## CAD (KiCad official)++- Symbol: `STM32H725VET6`+- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`+- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)+- 3D model files: `stm32h725vet6-etched.step` / `stm32h725vet6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32h725vet6.step` / `stm32h725vet6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907820846075904) (273 pp, sha256 `e2d4e6686c530a98`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32h725vet6-datasheet.pdf)
page.jsonadded+751@@ -0,0 +1,751 @@+{+ "slug": "stm32h725vet6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32h725vet6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32h725vet6.kicad_sym",+ "stm32h725vet6.kicad_mod",+ "stm32h725vet6.glb",+ "stm32h725vet6.step",+ "stm32h725vet6.lbr",+ "docs/hero.png",+ "docs/stm32h725vet6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32h725vet6-hero.glb",+ "stm32h725vet6-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32H725VET6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-100(14x14)",+ "pin_count": 100,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907820846075904",+ "parts": {+ "symbol": "stm32h725vet6.kicad_sym",+ "footprint": "stm32h725vet6.kicad_mod",+ "model_3d": "stm32h725vet6-hero.glb",+ "model_3d_plain": "stm32h725vet6.glb",+ "model_3d_step": "stm32h725vet6-etched.step",+ "model_3d_step_plain": "stm32h725vet6.step",+ "lbr": "stm32h725vet6.lbr"+ },+ "distributor_links": {+ "lcsc": "C730153",+ "digikey": "497-STM32H725VET6-ND",+ "mouser": "511-STM32H725VET6"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T23:49:08Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-STM32H725VET6-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32H725VET6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PE2",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O; alternate functions include TRACECLK, SAI1_CK1, USART10_RX, SPI4_SCK and FMC_A23."+ },+ {+ "number": "2",+ "name": "PE4",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O; alternate functions include TRACED1, SAI1_D2, SPI4_NSS, FMC_A20 and DCMI_D4/PSSI_D4."+ },+ {+ "number": "3",+ "name": "PE5",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O; alternate functions include TRACED2, SAI1_CK2, SPI4_MISO, FMC_A21 and DCMI_D6/PSSI_D6."+ },+ {+ "number": "4",+ "name": "VDD",+ "type": "power_in",+ "description": "Standard digital supply; VDD operating range is 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "5",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup-domain supply for the RTC and the 32x32-bit backup registers."+ },+ {+ "number": "6",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O; additional functions RTC_TAMP1/RTC_TS and WKUP4."+ },+ {+ "number": "7",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O; OSC32_IN input for the 32.768 kHz LSE crystal."+ },+ {+ "number": "8",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O; OSC32_OUT output for the 32.768 kHz LSE crystal."+ },+ {+ "number": "9",+ "name": "VSSSMPS",+ "type": "power_in",+ "description": "Ground of the internal SMPS step-down converter."+ },+ {+ "number": "10",+ "name": "VLXSMPS",+ "type": "power_out",+ "description": "Switching node of the internal SMPS step-down converter."+ },+ {+ "number": "11",+ "name": "VDDSMPS",+ "type": "power_in",+ "description": "Supply of the internal SMPS step-down converter; VDDSMPS = VDD, 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "12",+ "name": "VFBSMPS",+ "type": "power_in",+ "description": "Feedback input of the internal SMPS step-down converter."+ },+ {+ "number": "13",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O; OSC_IN input for the 4-50 MHz HSE oscillator."+ },+ {+ "number": "14",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O; OSC_OUT output for the 4-50 MHz HSE oscillator."+ },+ {+ "number": "15",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with embedded weak pull-up resistor."+ },+ {+ "number": "16",+ "name": "PC0",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ha) I/O with analog option supplied by VDDA; ADC123_INP10 input; alternate functions include FMC_D12/FMC_AD12 and OTG_HS_ULPI_STP."+ },+ {+ "number": "17",+ "name": "PC1",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ha) I/O with analog option; ADC123_INN10/ADC123_INP11, RTC_TAMP3 and WKUP6; alternate functions include SPI2_MOSI/I2S2_SDO and ETH_MDC."+ },+ {+ "number": "18",+ "name": "PC2_C",+ "type": "passive",+ "description": "3.3 V-tolerant analog-capable pin (TT_a, analog option supplied by VDDA); ADC3_INN1 and ADC3_INP0 inputs."+ },+ {+ "number": "19",+ "name": "PC3_C",+ "type": "passive",+ "description": "3.3 V-tolerant analog-capable pin (TT_a, analog option supplied by VDDA); ADC3_INP1 input."+ },+ {+ "number": "20",+ "name": "VDD",+ "type": "power_in",+ "description": "Standard digital supply; 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "21",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "22",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground."+ },+ {+ "number": "23",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive reference voltage pin for the analog peripherals."+ },+ {+ "number": "24",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply; 1.62 V to 3.6 V when the ADC or COMP is used (Table 13)."+ },+ {+ "number": "25",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ha) I/O with analog option; ADC1_INP16 and WKUP1; alternate functions include TIM2_CH1/TIM2_ETR, USART2_CTS and SDMMC2_CMD."+ },+ {+ "number": "26",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ha) I/O with analog option; ADC1_INN16/ADC1_INP17; alternate functions include TIM2_CH2, USART2_RTS/USART2_DE and ETH_MII_RX_CLK."+ },+ {+ "number": "27",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ha) I/O with analog option; ADC12_INP14 and WKUP2; alternate functions include TIM2_CH3, USART2_TX(boot) and ETH_MDIO."+ },+ {+ "number": "28",+ "name": "PA3",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ha) I/O with analog option; ADC12_INP15; alternate functions include TIM2_CH4, USART2_RX(boot) and OTG_HS_ULPI_D0."+ },+ {+ "number": "29",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "30",+ "name": "VDD",+ "type": "power_in",+ "description": "Standard digital supply; 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "31",+ "name": "PA4",+ "type": "bidirectional",+ "description": "3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INP18 and DAC1_OUT1; alternate functions include SPI1_NSS(boot), USART2_CK and FMC_D8/FMC_AD8."+ },+ {+ "number": "32",+ "name": "PA5",+ "type": "bidirectional",+ "description": "3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INN18/ADC12_INP19 and DAC1_OUT2; alternate functions include SPI1_SCK(boot), TIM2_CH1/TIM2_ETR and OTG_HS_ULPI_CK."+ },+ {+ "number": "33",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ha) I/O with analog option; ADC12_INP3; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO(boot) and DCMI_PIXCLK/PSSI_PDCK."+ },+ {+ "number": "34",+ "name": "PA7",+ "type": "bidirectional",+ "description": "3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INN3, ADC12_INP7 and OPAMP1_VINM; alternate functions include TIM1_CH1N, SPI1_MOSI(boot) and ETH_MII_RX_DV."+ },+ {+ "number": "35",+ "name": "PC4",+ "type": "bidirectional",+ "description": "3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INP4, OPAMP1_VOUT and COMP1_INM; alternate functions include FMC_A22, I2S1_MCK and ETH_MII_RXD0."+ },+ {+ "number": "36",+ "name": "PC5",+ "type": "bidirectional",+ "description": "3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INN4, ADC12_INP8 and OPAMP1_VINM; alternate functions include SAI1_D3, COMP1_OUT and ETH_MII_RXD1."+ },+ {+ "number": "37",+ "name": "PB0",+ "type": "bidirectional",+ "description": "3.3 V-tolerant (TT_ha) I/O with analog option; ADC12_INN5, ADC12_INP9, OPAMP1_VINP and COMP1_INP; alternate functions include TIM1_CH2N, OCTOSPIM_P1_IO1 and ETH_MII_RXD2."+ },+ {+ "number": "38",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ha) I/O with analog option; ADC12_INP5 and COMP1_INM; alternate functions include TIM1_CH3N, OCTOSPIM_P1_IO0 and ETH_MII_RXD3."+ },+ {+ "number": "39",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ha) I/O with analog option; COMP1_INP; alternate functions include RTC_OUT, SAI1_D1 and ETH_TX_ER."+ },+ {+ "number": "40",+ "name": "PE7",+ "type": "bidirectional",+ "description": "3.3 V-tolerant (TT_ha) I/O with analog option; OPAMP2_VOUT and COMP2_INM; alternate functions include TIM1_ETR, DFSDM1_DATIN2 and FMC_D4/FMC_AD4."+ },+ {+ "number": "41",+ "name": "PE8",+ "type": "bidirectional",+ "description": "3.3 V-tolerant (TT_ha) I/O with analog option; OPAMP2_VINM; alternate functions include TIM1_CH1N, COMP2_OUT and FMC_D5/FMC_AD5."+ },+ {+ "number": "42",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK and OTG_HS_ULPI_D3."+ },+ {+ "number": "43",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_f) I/O with FM+ option; alternate functions include TIM2_CH4, I2C2_SDA and ETH_MII_TX_EN/ETH_RMII_TX_EN."+ },+ {+ "number": "44",+ "name": "VCAP",+ "type": "power_in",+ "description": "Connection for the external capacitor of the core-supply regulator (see Table 15, VCAP operating conditions)."+ },+ {+ "number": "45",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "46",+ "name": "VDDLDO",+ "type": "power_in",+ "description": "Supply voltage for the internal LDO regulator; VDDLDO ≤ VDD, 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "47",+ "name": "VDD",+ "type": "power_in",+ "description": "Standard digital supply; 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "48",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM1_BKIN, SPI2_NSS/I2S2_WS, USART3_CK and FDCAN2_RX."+ },+ {+ "number": "49",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS/USART3_NSS and FDCAN2_TX."+ },+ {+ "number": "50",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM1_CH2N, USART1_TX, SPI2_MISO/I2S2_SDI and SDMMC2_D0."+ },+ {+ "number": "51",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; RTC_REFIN; alternate functions include TIM1_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO and SDMMC2_D1."+ },+ {+ "number": "52",+ "name": "PD8",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_CKIN3, USART3_TX(boot) and FMC_D13/FMC_AD13."+ },+ {+ "number": "53",+ "name": "PD9",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_DATIN3, USART3_RX(boot) and FMC_D14/FMC_AD14."+ },+ {+ "number": "54",+ "name": "PD10",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_CKOUT, USART3_CK, FMC_D15/FMC_AD15 and LCD_B3."+ },+ {+ "number": "55",+ "name": "PD11",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS/USART3_NSS and FMC_A16/FMC_CLE."+ },+ {+ "number": "56",+ "name": "PD12",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL and FMC_A17/FMC_ALE."+ },+ {+ "number": "57",+ "name": "PD13",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA and FMC_A18."+ },+ {+ "number": "58",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "59",+ "name": "VDD",+ "type": "power_in",+ "description": "Standard digital supply; 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "60",+ "name": "PD14",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_AD0."+ },+ {+ "number": "61",+ "name": "PD15",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM4_CH4, UART8_RTS/UART8_DE, UART9_TX and FMC_D1/FMC_AD1."+ },+ {+ "number": "62",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX and DCMI_D0/PSSI_D0."+ },+ {+ "number": "63",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX and FMC_NE1."+ },+ {+ "number": "64",+ "name": "PC8",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK and FMC_NE2/FMC_NCE."+ },+ {+ "number": "65",+ "name": "PC9",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA(boot) and I2C5_SDA."+ },+ {+ "number": "66",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL(boot), USART1_CK and OTG_HS_SOF."+ },+ {+ "number": "67",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_u) I/O with USB option (supplied by VDD33USB); alternate functions include TIM1_CH2, LPUART1_TX, SPI2_SCK/I2S2_CK and USART1_TX(boot); additional function OTG_HS_VBUS."+ },+ {+ "number": "68",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_u) I/O with USB option (supplied by VDD33USB); alternate functions include TIM1_CH3, LPUART1_RX, USART1_RX(boot) and MDIOS_MDIO; additional function OTG_HS_ID."+ },+ {+ "number": "69",+ "name": "PA11",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_u) I/O with USB option (supplied by VDD33USB); alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX and FDCAN1_RX; additional function OTG_HS_DM(boot)."+ },+ {+ "number": "70",+ "name": "PA12",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_u) I/O with USB option (supplied by VDD33USB); alternate functions include TIM1_ETR, LPUART1_RTS/LPUART1_DE, UART4_TX and FDCAN1_TX; additional function OTG_HS_DP(boot)."+ },+ {+ "number": "71",+ "name": "PA13(JTMS/SWDIO)",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O; JTMS/SWDIO serial-wire debug data pin."+ },+ {+ "number": "72",+ "name": "VCAP",+ "type": "power_in",+ "description": "Connection for the external capacitor of the core-supply regulator (see Table 15, VCAP operating conditions)."+ },+ {+ "number": "73",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "74",+ "name": "VDDLDO",+ "type": "power_in",+ "description": "Supply voltage for the internal LDO regulator; VDDLDO ≤ VDD, 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "75",+ "name": "VDD",+ "type": "power_in",+ "description": "Standard digital supply; 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "76",+ "name": "VDD33USB",+ "type": "power_in",+ "description": "Supply of the USB domain; 3.0 V to 3.6 V when USB is used, 0 to 3.6 V when USB is not used (Table 13)."+ },+ {+ "number": "77",+ "name": "PA14(JTCK/SWCLK)",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O; JTCK/SWCLK serial-wire debug clock pin."+ },+ {+ "number": "78",+ "name": "PA15(JTDI)",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O; JTDI debug data input; alternate functions include TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS and UART4_RTS/UART4_DE."+ },+ {+ "number": "79",+ "name": "PC10",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include DFSDM1_CKIN5, I2C5_SDA, SPI3_SCK/I2S3_CK, USART3_TX and UART4_TX."+ },+ {+ "number": "80",+ "name": "PC11",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include DFSDM1_DATIN5, I2C5_SCL, SPI3_MISO(boot)/I2S3_SDI, USART3_RX and UART4_RX."+ },+ {+ "number": "81",+ "name": "PC12",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TRACED3, FMC_D6/FMC_AD6, TIM15_CH1, UART5_TX and SDMMC1_CK."+ },+ {+ "number": "82",+ "name": "PD0",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_CKIN6, UART4_RX, FDCAN1_RX(boot) and FMC_D2/FMC_AD2."+ },+ {+ "number": "83",+ "name": "PD1",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_DATIN6, UART4_TX, FDCAN1_TX(boot) and FMC_D3/FMC_AD3."+ },+ {+ "number": "84",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TRACED2, FMC_D7/FMC_AD7, TIM3_ETR, TIM15_BKIN, UART5_RX and SDMMC1_CMD."+ },+ {+ "number": "85",+ "name": "PD3",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS and FMC_CLK."+ },+ {+ "number": "86",+ "name": "PD4",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include USART2_RTS/USART2_DE, OCTOSPIM_P1_IO4 and FMC_NOE."+ },+ {+ "number": "87",+ "name": "PD5",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include USART2_TX, OCTOSPIM_P1_IO5 and FMC_NWE."+ },+ {+ "number": "88",+ "name": "VDD",+ "type": "power_in",+ "description": "Standard digital supply; 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "89",+ "name": "PB3(JTDO/TRACESWO)",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O; JTDO/TRACESWO trace/debug output; alternate functions include TIM2_CH2, SPI1_SCK/I2S1_CK and SPI3_SCK/I2S3_CK."+ },+ {+ "number": "90",+ "name": "PB4(NJTRST)",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O; NJTRST JTAG reset pin; alternate functions include TIM16_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI and SPI3_MISO/I2S3_SDI."+ },+ {+ "number": "91",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_h) I/O with high-speed low-voltage option; alternate functions include TIM17_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SDO and FDCAN2_RX."+ },+ {+ "number": "92",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL(boot), CEC and USART1_TX."+ },+ {+ "number": "93",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fa) I/O with FM+ and analog options; additional function PVD_IN; alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA and USART1_RX."+ },+ {+ "number": "94",+ "name": "BOOT0",+ "type": "input",+ "description": "Dedicated BOOT0 pin; input voltage range 0 V to 9 V (Table 13); additional function VPP."+ },+ {+ "number": "95",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include TIM16_CH1, TIM4_CH3, I2C1_SCL, FDCAN1_RX and SDMMC1_D4."+ },+ {+ "number": "96",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fh) I/O with FM+ and high-speed low-voltage options; alternate functions include TIM17_CH1, TIM4_CH4, I2C1_SDA(boot), SPI2_NSS/I2S2_WS and FDCAN1_TX."+ },+ {+ "number": "97",+ "name": "VCAP",+ "type": "power_in",+ "description": "Connection for the external capacitor of the core-supply regulator (see Table 15, VCAP operating conditions)."+ },+ {+ "number": "98",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "99",+ "name": "VDDLDO",+ "type": "power_in",+ "description": "Supply voltage for the internal LDO regulator; VDDLDO ≤ VDD, 1.62 V to 3.6 V (Table 13)."+ },+ {+ "number": "100",+ "name": "VDD",+ "type": "power_in",+ "description": "Standard digital supply; 1.62 V to 3.6 V (Table 13)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin-to-number mapping was taken from the LQFP100 column of Table 8 (pages 64-94) because the text ex; Package variant check: MPN STM32H725VET6 decodes as V = 100 pins, E = 512 KB Flash, T = LQFP ECOPACK; Pin descriptions summarise the I/O structure (FT, TT, FT_h, FT_ha, FT_u, and so on) and the main alt"+ ],+ "pages_sent": 107,+ "cost_usd": 0.7537,+ "at": "2026-10-07T23:48:33"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907820846075904",+ "pages": 273,+ "sha256": "e2d4e6686c530a98",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 100,+ "described": 100,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32h725vet6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32h725vet6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "1241c542315d53cd2f263b45b7350ebb770dff397fcffb53d131b286680c9f0b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}