main
History Download
Ray Publish 0.1.0 553ae26

STM32H723VET6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

STM32H723VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TRACECLK, SAI1_CK1, USART10_RX and SPI4_SCK.
2 PE3 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B and USART10_TX.
3 PE4 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TRACED1, SAI1_D2, SPI4_NSS and DCMI_D4/PSSI_D4.
4 PE5 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TRACED2, SAI1_CK2, SPI4_MISO and DCMI_D6/PSSI_D6.
5 PE6 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TRACED3, TIM1_BKIN2, SPI4_MOSI and DCMI_D7/PSSI_D7.
6 VBAT power_in Backup-domain supply input for the RTC and the 32x32-bit backup registers.
7 PC13 bidirectional 5 V tolerant I/O (FT); additional functions RTC_TAMP1/RTC_TS and WKUP4.
8 PC14-OSC32_IN bidirectional 5 V tolerant I/O (FT); OSC32_IN low-speed oscillator input.
9 PC15-OSC32_OUT bidirectional 5 V tolerant I/O (FT); OSC32_OUT low-speed oscillator output.
10 VSS power_in Ground reference; all voltages are referenced to VSS.
11 VDD power_in Standard operating voltage 1.62 V to 3.6 V.
12 PH0-OSC_IN bidirectional 5 V tolerant I/O (FT); OSC_IN high-speed oscillator input.
13 PH1-OSC_OUT bidirectional 5 V tolerant I/O (FT); OSC_OUT high-speed oscillator output.
14 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
15 PC0 bidirectional 5 V tolerant I/O (FT_ha); additional function ADC123_INP10.
16 PC1 bidirectional 5 V tolerant I/O (FT_ha); additional functions ADC123_INN10, ADC123_INP11, RTC_TAMP3 and WKUP6.
17 PC2_C passive Analog-capable 3.3 V tolerant pin (TT_a); additional functions ADC3_INN1 and ADC3_INP0.
18 PC3_C passive Analog-capable 3.3 V tolerant pin (TT_a); additional function ADC3_INP1.
19 VSSA power_in Analog ground reference.
20 VREF+ power_in Positive analog reference voltage pin (supply type S).
21 VDDA power_in Analog operating voltage 1.62 V to 3.6 V when the ADC or COMP is used.
22 PA0 bidirectional 5 V tolerant I/O (FT_ha); additional functions ADC1_INP16 and WKUP1; alternate functions include TIM2_CH1/TIM2_ETR and USART2_CTS.
23 PA1 bidirectional 5 V tolerant I/O (FT_ha); additional functions ADC1_INN16 and ADC1_INP17; alternate functions include TIM2_CH2 and USART2_RTS.
24 PA2 bidirectional 5 V tolerant I/O (FT_ha); additional functions ADC12_INP14 and WKUP2; alternate functions include TIM2_CH3 and ETH_MDIO.
25 PA3 bidirectional 5 V tolerant I/O (FT_ha); additional function ADC12_INP15; alternate functions include TIM2_CH4 and OTG_HS_ULPI_D0.
26 VSS power_in Ground reference; all voltages are referenced to VSS.
27 VDD power_in Standard operating voltage 1.62 V to 3.6 V.
28 PA4 bidirectional 3.3 V tolerant I/O (TT_ha); additional functions ADC12_INP18 and DAC1_OUT1; alternate functions include SPI1_NSS, SPI3_NSS and USART2_CK.
29 PA5 bidirectional 3.3 V tolerant I/O (TT_ha); additional functions ADC12_INN18, ADC12_INP19 and DAC1_OUT2; alternate functions include TIM2_CH1 and SPI1_SCK.
30 PA6 bidirectional 5 V tolerant I/O (FT_ha); additional function ADC12_INP3; alternate functions include TIM1_BKIN, TIM3_CH1 and SPI1_MISO.
31 PA7 bidirectional 3.3 V tolerant I/O (TT_ha); additional functions ADC12_INN3, ADC12_INP7 and OPAMP1_VINM; alternate functions include TIM1_CH1N and SPI1_MOSI.
32 PC4 bidirectional 3.3 V tolerant I/O (TT_ha); additional functions ADC12_INP4, OPAMP1_VOUT and COMP1_INM; alternate function ETH_MII_RXD0.
33 PC5 bidirectional 3.3 V tolerant I/O (TT_ha); additional functions ADC12_INN4, ADC12_INP8, OPAMP1_VINM and COMP1_OUT.
34 PB0 bidirectional 3.3 V tolerant I/O (TT_ha); additional functions ADC12_INN5, ADC12_INP9, OPAMP1_VINP and COMP1_INP; alternate function TIM1_CH2N.
35 PB1 bidirectional 5 V tolerant I/O (FT_ha); additional functions ADC12_INP5 and COMP1_INM; alternate functions include TIM1_CH3N and TIM3_CH4.
36 PB2 bidirectional 5 V tolerant I/O (FT_ha); additional function COMP1_INP; alternate functions include RTC_OUT, SAI4_D1 and TIM23_ETR.
37 PE7 bidirectional 3.3 V tolerant I/O (TT_ha); additional functions OPAMP2_VOUT and COMP2_INM; alternate functions include TIM1_ETR and UART7_RX.
38 PE8 bidirectional 3.3 V tolerant I/O (TT_ha); additional functions OPAMP2_VINM and COMP2_OUT; alternate functions include TIM1_CH1N and UART7_TX.
39 PE9 bidirectional 3.3 V tolerant I/O (TT_ha); additional functions OPAMP2_VINP and COMP2_INP; alternate functions include TIM1_CH1 and UART7_RTS/UART7_DE.
40 PE10 bidirectional 5 V tolerant I/O (FT_ha); additional function COMP2_INM; alternate functions include TIM1_CH2N and UART7_CTS.
41 PE11 bidirectional 5 V tolerant I/O (FT_ha); additional function COMP2_INP; alternate functions include TIM1_CH2 and SPI4_NSS.
42 PE12 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM1_CH3N, SPI4_SCK and COMP1_OUT.
43 PE13 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM1_CH3, SPI4_MISO and COMP2_OUT.
44 PE14 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM1_CH4 and SPI4_MOSI.
45 PE15 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM1_BKIN, USART10_CK and TIM1_BKIN_COMP12.
46 PB10 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include TIM2_CH3, LPTIM2_IN1 and I2C2_SCL.
47 PB11 bidirectional 5 V tolerant I/O (FT_f); alternate functions include TIM2_CH4, LPTIM2_ETR and I2C2_SDA.
48 VCAP power_in Connect an external 2.2 uF capacitor (ESR below 100 mOhm) for the main regulator.
49 VSS power_in Ground reference; all voltages are referenced to VSS.
50 VDD power_in Standard operating voltage 1.62 V to 3.6 V.
51 PB12 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM1_BKIN, OCTOSPIM_P1_NCLK, I2C2_SMBA and SPI2_NSS.
52 PB13 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK and FDCAN2_TX.
53 PB14 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM1_CH2N, TIM12_CH1, USART1_TX and SPI2_MISO.
54 PB15 bidirectional 5 V tolerant I/O (FT_h); alternate functions include RTC_REFIN, TIM1_CH3N, USART1_RX and SPI2_MOSI.
55 PD8 bidirectional 5 V tolerant I/O (FT_h); alternate functions include DFSDM1_CKIN3, USART3_TX and FMC_D13/FMC_AD13.
56 PD9 bidirectional 5 V tolerant I/O (FT_h); alternate functions include DFSDM1_DATIN3, USART3_RX and FMC_D14/FMC_AD14.
57 PD10 bidirectional 5 V tolerant I/O (FT_h); alternate functions include DFSDM1_CKOUT, USART3_CK and FMC_D15/FMC_AD15.
58 PD11 bidirectional 5 V tolerant I/O (FT_h); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS and FMC_A16/FMC_CLE.
59 PD12 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL and FDCAN3_RX.
60 PD13 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA and FDCAN3_TX.
61 PD14 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_AD0.
62 PD15 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM4_CH4, UART8_RTS, UART9_TX and FMC_D1/FMC_AD1.
63 PC6 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM3_CH1, TIM8_CH1, I2S2_MCK and USART6_TX.
64 PC7 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM3_CH2, TIM8_CH2, I2S3_MCK and USART6_RX.
65 PC8 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TRACED1, TIM3_CH3, TIM8_CH3 and USART6_CK.
66 PC9 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include MCO2, TIM3_CH4, TIM8_CH4 and I2C3_SDA.
67 PA8 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include MCO1, TIM1_CH1, I2C3_SCL and USART1_CK.
68 PA9 bidirectional USB option I/O (FT_u, supplied by VDD33USB); alternate functions include TIM1_CH2, LPUART1_TX and USART1_TX; additional function OTG_HS_VBUS.
69 PA10 bidirectional USB option I/O (FT_u, supplied by VDD33USB); alternate functions include TIM1_CH3, LPUART1_RX and USART1_RX; additional function OTG_HS_ID.
70 PA11 bidirectional USB option I/O (FT_u, supplied by VDD33USB); alternate functions include TIM1_CH4, LPUART1_CTS and USART1_CTS; additional function OTG_HS_DM.
71 PA12 bidirectional USB option I/O (FT_u, supplied by VDD33USB); alternate functions include TIM1_ETR, LPUART1_RTS and USART1_RTS; additional function OTG_HS_DP.
72 PA13 bidirectional 5 V tolerant I/O (FT); debug function JTMS/SWDIO.
73 VCAP power_in Connect an external 2.2 uF capacitor (ESR below 100 mOhm) for the main regulator.
74 VSS power_in Ground reference; all voltages are referenced to VSS.
75 VDD power_in Standard operating voltage 1.62 V to 3.6 V.
76 PA14 bidirectional 5 V tolerant I/O (FT); debug function JTCK/SWCLK.
77 PA15 bidirectional 5 V tolerant I/O (FT); alternate functions include JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS and SPI3_NSS.
78 PC10 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include DFSDM1_CKIN5, I2C5_SDA, SPI3_SCK and USART3_TX.
79 PC11 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include DFSDM1_DATIN5, I2C5_SCL, SPI3_MISO and USART3_RX.
80 PC12 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TRACED3, FMC_D6/FMC_AD6, TIM15_CH1 and USART3_CK.
81 PD0 bidirectional 5 V tolerant I/O (FT_h); alternate functions include DFSDM1_CKIN6, UART4_RX, FDCAN1_RX and FMC_D2/FMC_AD2.
82 PD1 bidirectional 5 V tolerant I/O (FT_h); alternate functions include DFSDM1_DATIN6, UART4_TX, FDCAN1_TX and FMC_D3/FMC_AD3.
83 PD2 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TRACED2, FMC_D7/FMC_AD7, TIM3_ETR, UART5_RX and SDMMC1_CMD.
84 PD3 bidirectional 5 V tolerant I/O (FT_h); alternate functions include DFSDM1_CKOUT, SPI2_SCK, USART2_CTS and FMC_CLK.
85 PD4 bidirectional 5 V tolerant I/O (FT_h); alternate functions include USART2_RTS, OCTOSPIM_P1_IO4 and FMC_NOE.
86 PD5 bidirectional 5 V tolerant I/O (FT_h); alternate functions include USART2_TX, OCTOSPIM_P1_IO5 and FMC_NWE.
87 PD6 bidirectional 5 V tolerant I/O (FT_h); alternate functions include SAI1_D1, DFSDM1_DATIN1, USART2_RX and FMC_NWAIT.
88 PD7 bidirectional 5 V tolerant I/O (FT_h); alternate functions include DFSDM1_DATIN4, SPI1_MOSI, USART2_CK and FMC_NE1.
89 PB3 bidirectional 5 V tolerant I/O (FT_h); alternate functions include JTDO/TRACESWO, TIM2_CH2, SPI1_SCK and SPI3_SCK.
90 PB4 bidirectional 5 V tolerant I/O (FT_h); alternate functions include NJTRST, TIM16_BKIN, TIM3_CH1 and SPI1_MISO.
91 PB5 bidirectional 5 V tolerant I/O (FT_h); alternate functions include TIM17_BKIN, TIM3_CH2, I2C1_SMBA and SPI1_MOSI.
92 PB6 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL and USART1_TX.
93 PB7 bidirectional 5 V tolerant I/O (FT_fa); additional function PVD_IN; alternate functions include TIM17_CH1N, I2C1_SDA and USART1_RX.
94 BOOT0 input Dedicated BOOT0 input pin; input voltage range is VSS to 9.0 V.
95 PB8 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include TIM16_CH1, I2C1_SCL, UART4_RX and FDCAN1_RX.
96 PB9 bidirectional 5 V tolerant I/O (FT_fh); alternate functions include TIM17_CH1, I2C1_SDA, SPI2_NSS and UART4_TX.
97 PE0 bidirectional 5 V tolerant I/O (FT_h); alternate functions include LPTIM1_ETR, TIM4_ETR, UART8_RX and FMC_NBL0.
98 PE1 bidirectional 5 V tolerant I/O (FT_h); alternate functions include LPTIM1_IN2, UART8_TX and FMC_NBL1.
99 VSS power_in Ground reference; all voltages are referenced to VSS.
100 VDD power_in Standard operating voltage 1.62 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (VDD, VDDLDO, VDDA, VDD33USB, VBAT) VDDX - VSS -0.3 4 V 88
Input voltage on FT_xxx pins VIN -0.3 V max = Min(VDD, VDDA, VDD33USB, VBAT) + 4.0 V 88
Input voltage on TT_xx pins VIN -0.3 4 V 88
Input voltage on BOOT0 pin VIN 9 V min = VSS 88
Input voltage on any other pins VIN -0.3 4 V 88
Total current into sum of all VDD power lines (source) ΣIVDD 620 mA 89
Total current out of sum of all VSS ground lines (sink) ΣIVSS 620 mA 89
Maximum current into each VDD power pin (source) IVDD 100 mA 89
Maximum current out of each VSS ground pin (sink) IVSS 100 mA 89
Output current sunk by any I/O and control pin IIO 20 mA 89
Total output current sunk by sum of all I/Os and control pins ΣI(PIN) 140 mA 89
Total output current sourced by sum of all I/Os and control pins ΣI(PIN) 140 mA 89
Injected current on FT_xxx, TT_xx, RST and B pins except PA4, PA5 IINJ(PIN) -5 0 mA 89
Total injected current (sum of all I/Os and control pins) ΣIINJ(PIN) -25 25 mA 89
Storage temperature range TSTG -65 150 °C 89
Maximum junction temperature TJ 125 °C Industrial temperature range 6 89
Standard operating voltage VDD 1.62 3.6 V 90
Supply voltage for the internal regulator VDDLDO 1.62 3.6 V VDDLDO ≤ VDD 90
Standard operating voltage, USB domain VDD33USB 3 3.6 V USB used 90
Standard operating voltage, USB domain VDD33USB 0 3.6 V USB not used 90
Analog operating voltage VDDA 1.62 3.6 V ADC or COMP used 90
Analog operating voltage VDDA 1.8 V DAC used 90
Analog operating voltage VDDA 2 V OPAMP used 90
Analog operating voltage VDDA 0 V ADC, DAC, OPAMP, COMP, VREFBUF not used 90
I/O input voltage (TT_xx) VIN -0.3 V max = VDD + 0.3 V 90
I/O input voltage (BOOT0) VIN 0 9 V 90
I/O input voltage (all I/O except BOOT0 and TT_xx) VIN -0.3 V max = Min(VDD, VDDA, VDD33USB) + 3.6 V, when < 5.5 V 90
Internal regulator ON (LDO) core voltage, VOS3 VCORE 0.95 1 1.05 V Internal regulator ON (LDO), VOS3 90
Internal regulator ON (LDO) core voltage, VOS2 VCORE 1.05 1.1 1.15 V Internal regulator ON (LDO), VOS2 90
Internal regulator ON (LDO) core voltage, VOS1 VCORE 1.15 1.21 1.26 V Internal regulator ON (LDO), VOS1 90
Internal regulator ON (LDO) core voltage, VOS0 VCORE 1.3 1.36 1.4 V Internal regulator ON (LDO), VOS0 90
Arm Cortex-M7 clock frequency, VOS3 fCPU 170 MHz VOS3 91
Arm Cortex-M7 clock frequency, VOS2 fCPU 300 MHz VOS2 91
Arm Cortex-M7 clock frequency, VOS1 fCPU 400 MHz VOS1 91
Arm Cortex-M7 clock frequency, VOS0 fCPU 520 MHz VOS0 91
Arm Cortex-M7 clock frequency, VOS0 with CPU_FREQ_BOOST fCPU 550 MHz VOS0 and CPU_FREQ_BOOST 91
Ambient temperature, temperature range 6 TA -40 85 °C Maximum power dissipation 91
Ambient temperature, temperature range 6 TA -40 105 °C Low-power dissipation 91
Power-on/power-down reset threshold (rising edge) VPOR/PDR 1.62 1.67 1.71 V Rising edge 94
Power-on/power-down reset threshold (falling edge) VPOR/PDR 1.58 1.62 1.68 V Falling edge 94
Brown-out reset threshold 1 (rising edge) VBOR1 2.04 2.1 2.15 V Rising edge 94
Brown-out reset threshold 1 (falling edge) VBOR1 1.95 2 2.06 V Falling edge 94
POR and PVD consumption from VDD IDD_POR_PVD 0.8 1.2 µA 94
BOR and PVD consumption from VDD IDD_BOR_PVD 0.63 µA 94
Internal reference voltages VREFINT 1.18 1.216 1.255 V -40°C < TJ < TJmax 95
Internal reference voltage spread over the temperature range ΔVREFINT 5 15 mV -40°C < TJ < TJmax 95
Average temperature coefficient Tcoeff 20 70 ppm/°C 95
Average voltage coefficient VDDcoeff 10 1370 ppm/V 3.0 V < VDD < 3.6 V 95
Reference buffer consumption for ADC Irefbuf 9 13.5 23 µA VDD = 3.3 V 95
Regulated output voltage VREGOUTV33V 3 3.6 V 96
Output current load sinked by USB block IOUT 20 mA 96
User external clock source frequency fHSE_ext 4 25 50 MHz 105
HSI48 frequency fHSI48 47.5 48 48.5 MHz VDD=3.3 V, TJ=30 °C 109
Accuracy of the HSI48 oscillator over temperature (factory calibrated) ACCHSI48_REL -4.5 3.5 % TJ=-40 to 125 °C 109
HSI48 oscillator power consumption IDD(HSI48) 350 400 µA 109
HSI48 oscillator frequency drift with VDD (reference 3.3 V) ΔVDD(HSI48) 0.025 0.05 % VDD=3 to 3.6 V 109
HSI48 oscillator frequency drift with VDD (reference 3.3 V) ΔVDD(HSI48) 0.05 0.1 % VDD=1.62 V to 3.6 V 109
Duty cycle DuCy(HSI48) 45 55 % 109
HSI48 oscillator start-up time tsu(HSI48) 2.1 4 µs 109
Maximum BOR and PVD consumption, see IDD_BOR_PVD IDD_BOR_PVD 0.63 µA 94

CAD (KiCad official)

  • Symbol: STM32H723VET6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32h723vet6-etched.step / stm32h723vet6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32h723vet6.step / stm32h723vet6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (225 pp, sha256 c3741ebfd15024ac, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF