STM32H563VGT6

{
  "schema_version": 1,
  "type": "component",
  "slug": "stm32h563vgt6",
  "title": "STM32H563VGT6",
  "brief": "ST(意法半导体) Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "stm32h563vgt6",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "STM32H563VGT6",
    "manufacturer": "ST(意法半导体)",
    "package": "LQFP-100(14x14)",
    "pin_count": 100,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905489209847808",
    "parts": {
      "symbol": "stm32h563vgt6.kicad_sym",
      "footprint": "stm32h563vgt6.kicad_mod",
      "model_3d": "stm32h563vgt6-hero.glb",
      "model_3d_plain": "stm32h563vgt6-etched.glb",
      "model_3d_step": "stm32h563vgt6-etched.step",
      "model_3d_step_plain": "stm32h563vgt6.step",
      "lbr": "stm32h563vgt6.lbr"
    },
    "distributor_links": {
      "lcsc": "C18221950",
      "digikey": "497-STM32H563VGT6-ND"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T10:08:23Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-STM32H563VGT6-ND",
        "status": "found"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PE2",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); after reset the pin is a GPIO with alternate functions such as TRACECLK, LPTIM1_IN2, SAI1_CK1, SPI4_SCK and FMC_A23."
      },
      {
        "number": "2",
        "name": "PE3",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B, USART10_TX and FMC_A19, and it is a tamper input/output (TAMP_IN6/TAMP_OUT3)."
      },
      {
        "number": "3",
        "name": "PE4",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TRACED1, SAI1_D2, TIM15_CH1N, SPI4_NSS and FMC_A20, and it is a tamper input/output (TAMP_IN7/TAMP_OUT8)."
      },
      {
        "number": "4",
        "name": "PE5",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO and FMC_A21, and it is a tamper input/output (TAMP_IN8/TAMP_OUT7)."
      },
      {
        "number": "5",
        "name": "PE6",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, TIM15_CH2, SPI4_MOSI and FMC_A22, and it is a tamper input/output (TAMP_IN3/TAMP_OUT6)."
      },
      {
        "number": "6",
        "name": "VBAT",
        "type": "power_in",
        "description": "Backup-domain supply for the RTC, the 32 backup registers and the VBAT mode; VBAT is listed as a main power pin that must always be connected (Table 17 note 1)."
      },
      {
        "number": "7",
        "name": "PC13",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_t) supplied through the power switch (VSW): output speed must not exceed 2 MHz with a 30 pF maximum load and it must not be used as a current source; it is a tamper input/output (TAMP_IN1/TAMP_OUT2/TAMP_OUT3) and also RTC_OUT1/RTC_TS and WKUP4, and as a tamper it is functional in Standby and VBAT modes."
      },
      {
        "number": "8",
        "name": "PC14-OSC32_IN",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT) supplied through the power switch (VSW) with the same output limits as PC13 (2 MHz, 30 pF, no current source use); it is the OSC32_IN low-speed oscillator input (LSE, 32.768 kHz)."
      },
      {
        "number": "9",
        "name": "PC15-OSC32_OUT",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT) supplied through the power switch (VSW) with the same output limits as PC13 (2 MHz, 30 pF, no current source use); it is the OSC32_OUT low-speed oscillator output (LSE, 32.768 kHz)."
      },
      {
        "number": "10",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin; all VSS pins must be connected to the external ground (Table 17 note 1)."
      },
      {
        "number": "11",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply pin with a standard operating range of 1.71 V to 3.6 V (1.71 V to 2.7 V when HSLV = 1); all VDD pins must be connected (Table 20, Table 17 note 1)."
      },
      {
        "number": "12",
        "name": "PH0-OSC_IN",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT); it is the OSC_IN input of the 4-50 MHz HSE external oscillator, with EVENTOUT as an alternate function."
      },
      {
        "number": "13",
        "name": "PH1-OSC_OUT",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT); it is the OSC_OUT output of the 4-50 MHz HSE external oscillator, with EVENTOUT as an alternate function."
      },
      {
        "number": "14",
        "name": "NRST",
        "type": "bidirectional",
        "description": "Bidirectional reset pin (RST structure) with an embedded weak pull-up resistor."
      },
      {
        "number": "15",
        "name": "PC0",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_a) with analog switch function supplied by VDDA; it is also ADC12_INP10 and has alternate functions such as TIM16_BKIN, SAI1_MCLK_A, SPI2_RDY and FMC_SDNWE."
      },
      {
        "number": "16",
        "name": "PC1",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; additional functions are ADC12_INP11, ADC12_INN10, TAMP_IN3/TAMP_OUT5 and WKUP6, and alternate functions include TRACED0, SAI1_SD_A and ETH_MDC."
      },
      {
        "number": "17",
        "name": "PC2",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_a) with analog switch function supplied by VDDA; additional functions are ADC12_INP12 and ADC12_INN11, and alternate functions include PWR_CSLEEP, TIM17_CH1, SPI2_MISO/I2S2_SDI and OCTOSPI1_IO5."
      },
      {
        "number": "18",
        "name": "PC3",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_a) with analog switch function supplied by VDDA; additional functions are ADC12_INP13 and ADC12_INN12, and alternate functions include PWR_CSTOP, SAI1_D3, LPTIM3_CH1 and ETH_MII_TX_CLK."
      },
      {
        "number": "19",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground pin for the analog domain (ADC, DAC, reference), which must be connected like the other ground pins (Table 17 note 1)."
      },
      {
        "number": "20",
        "name": "VREF-",
        "type": "power_in",
        "description": "Negative voltage reference pin for the ADC, listed as a supply pin in the pin definition table."
      },
      {
        "number": "21",
        "name": "VREF+",
        "type": "power_in",
        "description": "Positive voltage reference input for ADC and DAC; VREF+ may exceed VDDA by at most 0.4 V (Table 17)."
      },
      {
        "number": "22",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog supply for the ADC, DAC and other analog blocks; VDDx - VSS must not exceed 4.0 V (Table 17)."
      },
      {
        "number": "23",
        "name": "PA0",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_at) with analog switch function supplied by VDDA; it is a tamper input in Standby/VBAT modes, with additional functions ADC12_INP0, ADC12_INN1, TAMP_IN2/TAMP_OUT1 and WKUP1, and alternate functions such as TIM2_CH1, SPI6_NSS and USART2_CTS."
      },
      {
        "number": "24",
        "name": "PA1",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_aht) with analog switch function supplied by VDDA; it is a tamper input/output in Standby/VBAT modes, with additional functions ADC12_INP1 and TAMP_IN5/TAMP_OUT4, and alternate functions such as TIM2_CH2, LPTIM1_IN1 and OCTOSPI1_DQS."
      },
      {
        "number": "25",
        "name": "PA2",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_hat) with analog switch function supplied by VDDA; it is a tamper input in Standby/VBAT modes, with additional functions ADC12_INP14, TAMP_IN4/TAMP_OUT3 and WKUP2, and alternate functions such as TIM2_CH3, LPTIM1_IN2 and USART2_TX."
      },
      {
        "number": "26",
        "name": "PA3",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; additional function ADC12_INP15, and alternate functions include TIM2_CH4, OCTOSPI1_CLK, SPI2_NSS/I2S2_WS and USART2_RX."
      },
      {
        "number": "27",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin; all VSS pins must be connected to the external ground (Table 17 note 1)."
      },
      {
        "number": "28",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply pin with a standard operating range of 1.71 V to 3.6 V (1.71 V to 2.7 V when HSLV = 1); all VDD pins must be connected (Table 20)."
      },
      {
        "number": "29",
        "name": "PA4",
        "type": "bidirectional",
        "description": "3.6 V-tolerant I/O (TT_a) with analog switch function supplied by VDDA; additional functions are ADC12_INP18 and DAC1_OUT1, and alternate functions include TIM5_ETR, SPI1_NSS/I2S1_WS and SPI6_NSS."
      },
      {
        "number": "30",
        "name": "PA5",
        "type": "bidirectional",
        "description": "3.6 V-tolerant I/O (TT_ah) with analog switch function supplied by VDDA; additional functions are ADC12_INP19, ADC12_INN18 and DAC1_OUT2, and alternate functions include TIM2_CH1, SPI1_SCK/I2S1_CK and ETH_MII_TX_EN."
      },
      {
        "number": "31",
        "name": "PA6",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; additional function ADC12_INP3, and alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI and OCTOSPI1_IO3."
      },
      {
        "number": "32",
        "name": "PA7",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; additional functions are ADC12_INP7 and ADC12_INN3, and alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SDO and FMC_NWE."
      },
      {
        "number": "33",
        "name": "PC4",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_a) with analog switch function supplied by VDDA; additional function ADC12_INP4, and alternate functions include TIM2_CH4, SAI1_CK1, LPTIM2_ETR and FMC_SDNE0."
      },
      {
        "number": "34",
        "name": "PC5",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; additional functions are ADC12_INP8 and ADC12_INN4, and alternate functions include TIM1_CH4N, SAI1_D3, PSSI_D15 and OCTOSPI1_DQS."
      },
      {
        "number": "35",
        "name": "PB0",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; additional functions are ADC12_INP9 and ADC12_INN5, and alternate functions include TIM1_CH2N, TIM3_CH3, OCTOSPI1_IO1 and ETH_MII_RXD2."
      },
      {
        "number": "36",
        "name": "PB1",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; additional function ADC12_INP5, and alternate functions include TIM1_CH3N, TIM3_CH4, OCTOSPI1_IO0 and ETH_MII_RXD3."
      },
      {
        "number": "37",
        "name": "PB2",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; additional function LSCO, and alternate functions include RTC_OUT2, SAI1_D1, SPI1_RDY, LPTIM1_CH1 and OCTOSPI1_CLK."
      },
      {
        "number": "38",
        "name": "PE7",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; alternate functions include TIM1_ETR, UART7_RX, OCTOSPI1_IO4 and FMC_D4/FMC_AD4."
      },
      {
        "number": "39",
        "name": "PE8",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; alternate functions include TIM1_CH1N, UART7_TX, OCTOSPI1_IO5 and FMC_D5/FMC_AD5."
      },
      {
        "number": "40",
        "name": "PE9",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; alternate functions include TIM1_CH1, UART7_RTS/UART7_DE, OCTOSPI1_IO6 and FMC_D6/FMC_AD6."
      },
      {
        "number": "41",
        "name": "PE10",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; alternate functions include TIM1_CH2N, UART7_CTS, OCTOSPI1_IO7 and FMC_D7/FMC_AD7."
      },
      {
        "number": "42",
        "name": "PE11",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_ah) with analog switch function supplied by VDDA; alternate functions include TIM1_CH2, SPI1_RDY, SPI4_NSS, OCTOSPI1_NCS and FMC_D8/FMC_AD8."
      },
      {
        "number": "43",
        "name": "PE12",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM1_CH3N, SPI4_SCK, SAI2_SCK_B and FMC_D9/FMC_AD9."
      },
      {
        "number": "44",
        "name": "PE13",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM1_CH3, SPI4_MISO, SAI2_FS_B and FMC_D10/FMC_AD10."
      },
      {
        "number": "45",
        "name": "PE14",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B and FMC_D11/FMC_AD11."
      },
      {
        "number": "46",
        "name": "PE15",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM1_BKIN, TIM1_CH4N, USART10_CK and FMC_D12/FMC_AD12."
      },
      {
        "number": "47",
        "name": "PB10",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ capable I/O (FT_f); alternate functions include TIM2_CH3, LPTIM3_CH1, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX and OCTOSPI1_NCS."
      },
      {
        "number": "48",
        "name": "VCAP",
        "type": "power_in",
        "description": "Connection for the external capacitor that stabilizes the embedded LDO regulator; two VCAP pins must be connected to external capacitors (Section 5.3.2)."
      },
      {
        "number": "49",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin; all VSS pins must be connected to the external ground (Table 17 note 1)."
      },
      {
        "number": "50",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply pin with a standard operating range of 1.71 V to 3.6 V (1.71 V to 2.7 V when HSLV = 1); all VDD pins must be connected (Table 20)."
      },
      {
        "number": "51",
        "name": "PB12",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ capable I/O (FT_fh); alternate functions include TIM1_BKIN, OCTOSPI1_NCLK, I2C2_SDA, SPI2_NSS/I2S2_WS, USART3_CK, FDCAN2_RX and UART5_RX."
      },
      {
        "number": "52",
        "name": "PB13",
        "type": "bidirectional",
        "description": "I/O with FT_c structure (5.5 V maximum input, USB Type-C PD function); alternate functions include TIM1_CH1N, LPTIM3_IN1, I2C2_SMBA, SPI2_SCK/I2S2_CK, FDCAN2_TX and UART5_TX, its output timing is given in Table 67, and it has the UCPD1_CC1 additional function."
      },
      {
        "number": "53",
        "name": "PB14",
        "type": "bidirectional",
        "description": "I/O with FT_c structure (5.5 V maximum input, USB Type-C PD function); alternate functions include TIM1_CH2N, TIM12_CH1, USART1_TX, SPI2_MISO/I2S2_SDI and SDMMC2_D0, its output timing is given in Table 67, and it has the UCPD1_CC2 additional function."
      },
      {
        "number": "54",
        "name": "PB15",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_h); additional function PVD_IN, and alternate functions include RTC_REFIN, TIM1_CH3N, USART1_RX, SPI2_MOSI/I2S2_SDO and OCTOSPI1_CLK."
      },
      {
        "number": "55",
        "name": "PD8",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include USART3_TX and FMC_D13/FMC_AD13."
      },
      {
        "number": "56",
        "name": "PD9",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include USART3_RX, FDCAN2_RX and FMC_D14/FMC_AD14."
      },
      {
        "number": "57",
        "name": "PD10",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include LPTIM2_CH2, USART3_CK and FMC_D15/FMC_AD15."
      },
      {
        "number": "58",
        "name": "PD11",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include SAI1_CK1, LPTIM2_IN2, USART3_CTS/USART3_NSS, OCTOSPI1_IO0 and FMC_A16/FMC_CLE."
      },
      {
        "number": "59",
        "name": "PD12",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_fh); alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL, I3C1_SCL, USART3_RTS/USART3_DE and FMC_A17/FMC_ALE, and it has the DCMI_D12/PSSI_D12 additional function."
      },
      {
        "number": "60",
        "name": "PD13",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_fh); alternate functions include LPTIM1_CH1, TIM4_CH2, I2C4_SDA, I3C1_SDA, OCTOSPI1_IO3 and FMC_A18."
      },
      {
        "number": "61",
        "name": "PD14",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM4_CH3, UART8_CTS, UART9_RX and FMC_D0/FMC_AD0."
      },
      {
        "number": "62",
        "name": "PD15",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM4_CH4, UART8_RTS/UART8_DE, UART9_TX and FMC_D1/FMC_AD1."
      },
      {
        "number": "63",
        "name": "PC6",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM3_CH1, TIM8_CH1, I2S2_MCK, SAI1_SCK_A, USART6_TX and FMC_NWAIT."
      },
      {
        "number": "64",
        "name": "PC7",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TRGIO, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX and FMC_NE1."
      },
      {
        "number": "65",
        "name": "PC8",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, UART5_RTS/UART5_DE and FMC_NE2/FMC_NCE."
      },
      {
        "number": "66",
        "name": "PC9",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_fh) with USB Type-C PD dead-battery function (UCPD1_DB2); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, AUDIOCLK and OCTOSPI1_IO0."
      },
      {
        "number": "67",
        "name": "PA8",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_fh); alternate functions include MCO1, TIM1_CH1, I2C3_SCL, SPI1_RDY, USART1_CK and USB_SOF."
      },
      {
        "number": "68",
        "name": "PA9",
        "type": "bidirectional",
        "description": "I/O with FT_d structure (5 V-tolerant, USB Type-C PD dead-battery function, UCPD1_DB1); alternate functions include TIM1_CH2, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX and ETH_MII_TX_ER."
      },
      {
        "number": "69",
        "name": "PA10",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_h); alternate functions include TIM1_CH3, LPUART1_RX, LPTIM2_IN2, UCPD1_FRSTX, USART1_RX and FDCAN2_TX."
      },
      {
        "number": "70",
        "name": "PA11",
        "type": "bidirectional",
        "description": "I/O with FT_u structure (USB function supplied by VDDUSB); alternate functions include TIM1_CH4, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS/USART1_NSS and FDCAN1_RX, and it carries the USB_DM function."
      },
      {
        "number": "71",
        "name": "PA12",
        "type": "bidirectional",
        "description": "I/O with FT_u structure (USB function supplied by VDDUSB); alternate functions include TIM1_ETR, LPUART1_RTS/LPUART1_DE, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS/USART1_DE and FDCAN1_TX, and it carries the USB_DP function."
      },
      {
        "number": "72",
        "name": "PA13",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT); after reset this pin is the JTMS/SWDIO debug function, and the internal pull-up on PA13 is activated."
      },
      {
        "number": "73",
        "name": "VDDUSB",
        "type": "power_in",
        "description": "Supply for the USB full-speed I/Os (the _u structure pins PA11 and PA12) (Table 13, Figure 20)."
      },
      {
        "number": "74",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin; all VSS pins must be connected to the external ground (Table 17 note 1)."
      },
      {
        "number": "75",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply pin with a standard operating range of 1.71 V to 3.6 V (1.71 V to 2.7 V when HSLV = 1); all VDD pins must be connected (Table 20)."
      },
      {
        "number": "76",
        "name": "PA14",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT); after reset this pin is the JTCK/SWCLK debug function, and the internal pull-down on PA14 is activated."
      },
      {
        "number": "77",
        "name": "PA15",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT); after reset this pin is the JTDI debug function, and the internal pull-up on PA15 is activated; alternate functions include TIM2_CH1, SPI1_NSS/I2S1_WS, UART4_RTS/UART4_DE and UART7_TX."
      },
      {
        "number": "78",
        "name": "PC10",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_h); alternate functions include LPTIM3_ETR, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, OCTOSPI1_IO1 and SDMMC1_D2."
      },
      {
        "number": "79",
        "name": "PC11",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_h); alternate functions include LPTIM3_IN1, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, OCTOSPI1_NCS and SDMMC1_D3."
      },
      {
        "number": "80",
        "name": "PC12",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_h); alternate functions include TRACED3, TIM15_CH1, SPI6_SCK, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX and SDMMC1_CK."
      },
      {
        "number": "81",
        "name": "PD0",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM8_CH4N, UART4_RX, FDCAN1_RX, UART9_CTS and FMC_D2/FMC_AD2."
      },
      {
        "number": "82",
        "name": "PD1",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include UART4_TX, FDCAN1_TX and FMC_D3/FMC_AD3."
      },
      {
        "number": "83",
        "name": "PD2",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); additional function WKUP7; alternate functions include TRACED2, TIM3_ETR, TIM15_BKIN, UART5_RX, SDMMC1_CMD and LPTIM4_ETR."
      },
      {
        "number": "84",
        "name": "PD3",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); additional function WKUP8; alternate functions include SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK and DCMI_D5/PSSI_D5."
      },
      {
        "number": "85",
        "name": "PD4",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include USART2_RTS/USART2_DE, OCTOSPI1_IO4 and FMC_NOE."
      },
      {
        "number": "86",
        "name": "PD5",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM1_CH4N, SPI2_RDY, USART2_TX, FDCAN1_TX, OCTOSPI1_IO5 and FMC_NWE."
      },
      {
        "number": "87",
        "name": "PD6",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_sh) supplied only by VDDIO2 (Table 13); alternate functions include SAI1_D1, SPI3_MOSI/I2S3_SDO, USART2_RX, OCTOSPI1_IO6 and FMC_NWAIT."
      },
      {
        "number": "88",
        "name": "PD7",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_sh) supplied only by VDDIO2 (Table 13); alternate functions include SPI1_MOSI/I2S1_SDO, USART2_CK, OCTOSPI1_IO7, SDMMC2_CMD and FMC_NE1/FMC_NCE."
      },
      {
        "number": "89",
        "name": "PB3",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_fh); after reset this pin is the JTDO/TRACESWO debug function; alternate functions include TIM2_CH2, I2C2_SDA, SPI1_SCK/I2S1_CK, SPI6_SCK and LPTIM6_ETR."
      },
      {
        "number": "90",
        "name": "PB4",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); after reset this pin is the NJTRST debug function, and the internal pull-up on PB4 is activated; alternate functions include TIM16_BKIN, TIM3_CH1, OCTOSPI1_CLK, LPTIM1_CH2 and SPI1_MISO/I2S1_SDI."
      },
      {
        "number": "91",
        "name": "PB5",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include TIM17_BKIN, TIM3_CH2, OCTOSPI1_NCLK, I2C1_SMBA, SPI1_MOSI/I2S1_SDO and FDCAN2_RX."
      },
      {
        "number": "92",
        "name": "PB6",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_f); alternate functions include TIM16_CH1N, TIM4_CH1, I3C1_SCL, I2C1_SCL, USART1_TX, LPUART1_TX and FDCAN2_TX."
      },
      {
        "number": "93",
        "name": "PB7",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_fa) with analog switch function supplied by VDDA; additional function WKUP5; alternate functions include TIM17_CH1N, TIM4_CH2, I3C1_SDA, I2C1_SDA, USART1_RX and LPUART1_RX."
      },
      {
        "number": "94",
        "name": "BOOT0",
        "type": "input",
        "description": "Boot pin (input-only, B structure) used for boot-mode selection; its input voltage is limited to VSS - 0.3 V up to min(min(VDD, VDDA, VDDUSB, VDDIO2) + 4.0 V, 6.0 V) (Table 17)."
      },
      {
        "number": "95",
        "name": "PB8",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_fhs) supplied only by VDDIO2 (Table 13); alternate functions include TIM16_CH1, TIM4_CH3, I3C1_SCL, I2C1_SCL, SPI4_RDY, UART4_RX and FDCAN1_RX."
      },
      {
        "number": "96",
        "name": "PB9",
        "type": "bidirectional",
        "description": "5 V-tolerant Fm+ I/O (FT_fhs) supplied only by VDDIO2 (Table 13); alternate functions include TIM17_CH1, TIM4_CH4, I3C1_SDA, I2C1_SDA, SPI2_NSS/I2S2_WS, UART4_TX and FDCAN1_TX."
      },
      {
        "number": "97",
        "name": "PE0",
        "type": "bidirectional",
        "description": "5 V-tolerant I/O (FT_h); alternate functions include LPTIM1_ETR, TIM4_ETR, LPTIM2_CH2, SPI3_RDY, UART8_RX, FDCAN1_RX and FMC_NBL0."
      },
      {
        "number": "98",
        "name": "VCAP",
        "type": "power_in",
        "description": "Connection for the external capacitor that stabilizes the embedded LDO regulator; the second VCAP pin must also be connected to an external capacitor (Section 5.3.2)."
      },
      {
        "number": "99",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin; all VSS pins must be connected to the external ground (Table 17 note 1)."
      },
      {
        "number": "100",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply pin with a standard operating range of 1.71 V to 3.6 V (1.71 V to 2.7 V when HSLV = 1); all VDD pins must be connected (Table 20)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: These pins are I/O structure _s (supplied only by VDDIO2; Table 13), but the LQFP100 non-SMPS pinout; Two VCAP pins (48 and 98) are listed. The datasheet requires external capacitors on the VCAP pins, b; The MPN STM32H563VGT6 has no 'Q' suffix, so the non-SMPS pinout (Figure 8, Table 14 LQFP100 column) "
        ],
        "pages_sent": 115,
        "cost_usd": 0.8343,
        "at": "2026-10-18T10:07:46"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905489209847808",
        "pages": 270,
        "sha256": "fc24f0be69fd186b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 100,
        "described": 100,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm32h563vgt6.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16,
          16,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stm32h563vgt6-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16,
          16,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ef70789e87bb8cc487202a412321d608cae8570fcddd6a5f317e6230754067b3",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "ST(意法半导体)",
      "Package": "LQFP-100(14x14)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "100"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "fc24f0be69fd186b0e60a8174691e04d781173b055c966341e8095bc4cf3b425",
      "rows": [
        {
          "name": "Supply voltage VDDx to VSS (external main supply, including VDDA, VDDUSB, VDDIO2, VBAT, VREF+)",
          "symbol": "VDDx - VSS",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 4,
          "conditions": "External main supply pins",
          "source_page": 124,
          "source": "datasheet"
        },
        {
          "name": "Input voltage on TT_xx pins",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 4,
          "conditions": "TT_xx pins; min printed as VSS - 0.3",
          "source_page": 124,
          "source": "datasheet"
        },
        {
          "name": "Input voltage on any other pins",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 4,
          "conditions": "Any other pins not listed separately; min printed as VSS - 0.3",
          "source_page": 124,
          "source": "datasheet"
        },
        {
          "name": "Input voltage on FT_c pins",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 5.5,
          "conditions": "FT_c pins; min printed as VSS - 0.3",
          "source_page": 124,
          "source": "datasheet"
        },
        {
          "name": "Allowed voltage difference for VREF+ > VDDA",
          "symbol": "VREF+-VDDA",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "VREF+ > VDDA",
          "source_page": 124,
          "source": "datasheet"
        },
        {
          "name": "Variations between different VDDX power pins of the same domain",
          "symbol": "|ΔVDDx|",
          "kind": "absolute_maximum",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "Same domain",
          "source_page": 124,
          "source": "datasheet"
        },
        {
          "name": "Variations between all the different ground pins",
          "symbol": "|VSSx-VSS|",
          "kind": "absolute_maximum",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "All ground pins",
          "source_page": 124,
          "source": "datasheet"
        },
        {
          "name": "Total current into sum of all VDD power lines (source)",
          "symbol": "∑IVDD",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 350,
          "conditions": "",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Total current out of sum of all VSS ground lines (sink)",
          "symbol": "∑IVSS",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 350,
          "conditions": "",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Maximum current into each VDD power pin (source)",
          "symbol": "IVDD",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "Each VDD pin",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Maximum current out of each VSS ground pin (sink)",
          "symbol": "IVSS",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "Each VSS pin",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Output current sunk/sourced by any I/O and control pin",
          "symbol": "IIO(PIN)",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 20,
          "conditions": "",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Total output current sunk by sum of all I/Os and control pins",
          "symbol": "∑IIO(PIN)",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 140,
          "conditions": "",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Total output current sourced by sum of all I/Os and control pins",
          "symbol": "∑IIO(PIN)",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 140,
          "conditions": "",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Injected current on FT_xxx, TT_xx, NRST pins",
          "symbol": "IINJ(PIN)",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -5,
          "typ": null,
          "max": 0,
          "conditions": "FT_xxx, TT_xx, NRST pins",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Total injected current (sum of all I/Os and control pins)",
          "symbol": "∑|IINJ(PIN)|",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -25,
          "typ": null,
          "max": 25,
          "conditions": "",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature range",
          "symbol": "TSTG",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Maximum junction temperature",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 130,
          "conditions": "Limited to 105 °C in VOS0 voltage range",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Standard operating voltage",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.71,
          "typ": null,
          "max": 3.6,
          "conditions": "HSLV = 0",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "Standard operating voltage",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.71,
          "typ": null,
          "max": 2.7,
          "conditions": "HSLV = 1",
          "source_page": 125,
          "source": "datasheet"
        },
        {
          "name": "I/O supply voltage (PB8, PB9, PD6, PD7, PG[9:14])",
          "symbol": "VDDIO2",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.08,
          "typ": null,
          "max": 3.6,
          "conditions": "At least one I/O in PB8, PB9, PD6, PD7, PG[9:14] used, HSLV = 0",
          "source_page": 126,
          "source": "datasheet"
        },
        {
          "name": "I/O supply voltage (PB8, PB9, PD6, PD7, PG[9:14])",
          "symbol": "VDDIO2",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.08,
          "typ": null,
          "max": 2.7,
          "conditions": "At least one I/O in PB8, PB9, PD6, PD7, PG[9:14] used, HSLV = 1",
          "source_page": 126,
          "source": "datasheet"
        },
        {
          "name": "USB supply voltage",
          "symbol": "VDDUSB",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3,
          "typ": null,
          "max": 3.6,
          "conditions": "USB is used",
          "source_page": 126,
          "source": "datasheet"
        },
        {
          "name": "Analog supply voltage",
          "symbol": "VDDA",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.62,
          "typ": null,
          "max": 3.6,
          "conditions": "ADC is used",
          "source_page": 126,
          "source": "datasheet"
        },
        {
          "name": "Analog supply voltage",
          "symbol": "VDDA",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 3.6,
          "conditions": "DAC is used",
          "source_page": 126,
          "source": "datasheet"
        },
        {
          "name": "Analog supply voltage",
          "symbol": "VDDA",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.1,
          "typ": null,
          "max": 3.6,
          "conditions": "VREFBUF is used",
          "source_page": 126,
          "source": "datasheet"
        },
        {
          "name": "Backup domain supply voltage",
          "symbol": "VBAT",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.2,
          "typ": null,
          "max": 3.6,
          "conditions": "",
          "source_page": 126,
          "source": "datasheet"
        },
        {
          "name": "I/O input voltage on FT_c I/O",
          "symbol": "VIN",
          "kind": "recommended_operating",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 5,
          "conditions": "FT_c I/O",
          "source_page": 126,
          "source": "datasheet"
        },
        {
          "name": "Internal regulator ON, VCORE",
          "symbol": "VCORE",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.3,
          "typ": 1.35,
          "max": 1.4,
          "conditions": "VOS0, max frequency for AHB and APB 250 MHz",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "Internal regulator ON, VCORE",
          "symbol": "VCORE",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.15,
          "typ": 1.2,
          "max": 1.26,
          "conditions": "VOS1, max frequency for AHB and APB 200 MHz",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "Internal regulator ON, VCORE",
          "symbol": "VCORE",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.05,
          "typ": 1.1,
          "max": 1.15,
          "conditions": "VOS2, max frequency for AHB and APB 150 MHz",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "Internal regulator ON, VCORE",
          "symbol": "VCORE",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 0.95,
          "typ": 1,
          "max": 1.05,
          "conditions": "VOS3, max frequency for AHB and APB 100 MHz",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "Regulator OFF, external VCORE supplied on VCAP pins",
          "symbol": "VCORE",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.32,
          "typ": 1.35,
          "max": 1.4,
          "conditions": "VOS0",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "Regulator OFF, external VCORE supplied on VCAP pins",
          "symbol": "VCORE",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.17,
          "typ": 1.2,
          "max": 1.26,
          "conditions": "VOS1",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "Regulator OFF, external VCORE supplied on VCAP pins",
          "symbol": "VCORE",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.07,
          "typ": 1.1,
          "max": 1.15,
          "conditions": "VOS2",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "Regulator OFF, external VCORE supplied on VCAP pins",
          "symbol": "VCORE",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 0.97,
          "typ": 1,
          "max": 1.05,
          "conditions": "VOS3",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "AHB clock frequency fHCLK",
          "symbol": "fHCLK",
          "kind": "recommended_operating",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 250,
          "conditions": "VOS0",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "AHB clock frequency fHCLK",
          "symbol": "fHCLK",
          "kind": "recommended_operating",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 200,
          "conditions": "VOS1",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "AHB clock frequency fHCLK",
          "symbol": "fHCLK",
          "kind": "recommended_operating",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "VOS2",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "AHB clock frequency fHCLK",
          "symbol": "fHCLK",
          "kind": "recommended_operating",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "VOS3",
          "source_page": 127,
          "source": "datasheet"
        },
        {
          "name": "Ambient temperature for the suffix 6 version",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "Maximum power dissipation",
          "source_page": 128,
          "source": "datasheet"
        },
        {
          "name": "Ambient temperature for the suffix 6 version",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "In LDO bypass mode",
          "source_page": 128,
          "source": "datasheet"
        },
        {
          "name": "Junction temperature range",
          "symbol": "TJ",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 105,
          "conditions": "VOS0",
          "source_page": 128,
          "source": "datasheet"
        },
        {
          "name": "Junction temperature range",
          "symbol": "TJ",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 130,
          "conditions": "VOS1, VOS2, and VOS3",
          "source_page": 128,
          "source": "datasheet"
        },
        {
          "name": "Internal reference voltage",
          "symbol": "VREFINT",
          "kind": "electrical",
          "unit": "V",
          "min": 1.18,
          "typ": 1.216,
          "max": 1.255,
          "conditions": "-40 °C < TJ < +130 °C",
          "source_page": 135,
          "source": "datasheet"
        },
        {
          "name": "Internal reference voltage spread over the temperature range",
          "symbol": "∆VREFINT",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 5,
          "max": 15,
          "conditions": "-40 °C < TJ < +130 °C",
          "source_page": 135,
          "source": "datasheet"
        },
        {
          "name": "Average temperature coefficient",
          "symbol": "TCoeff",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": null,
          "typ": 20,
          "max": 70,
          "conditions": "",
          "source_page": 135,
          "source": "datasheet"
        },
        {
          "name": "Average voltage coefficient",
          "symbol": "VDDcoeff",
          "kind": "voltage_coefficient",
          "unit": "ppm/V",
          "min": null,
          "typ": 10,
          "max": 1370,
          "conditions": "3.0 V < VDD < 3.6 V",
          "source_page": 135,
          "source": "datasheet"
        },
        {
          "name": "Power-on/down reset threshold (BORH_EN = 0), rising edge",
          "symbol": "VPOR/PDR",
          "kind": "electrical",
          "unit": "V",
          "min": 1.62,
          "typ": 1.67,
          "max": 1.71,
          "conditions": "Rising edge, BORH_EN = 0",
          "source_page": 133,
          "source": "datasheet"
        },
        {
          "name": "Power-on/down reset threshold (BORH_EN = 0), falling edge",
          "symbol": "VPOR/PDR",
          "kind": "electrical",
          "unit": "V",
          "min": 1.58,
          "typ": 1.62,
          "max": 1.68,
          "conditions": "Falling edge, BORH_EN = 0",
          "source_page": 133,
          "source": "datasheet"
        },
        {
          "name": "Brownout reset threshold 1 (BORH_EN = 1), rising edge",
          "symbol": "VBOR1",
          "kind": "electrical",
          "unit": "V",
          "min": 2.04,
          "typ": 2.1,
          "max": 2.15,
          "conditions": "Rising edge, BORH_EN = 1",
          "source_page": 133,
          "source": "datasheet"
        },
        {
          "name": "Brownout reset threshold 1 (BORH_EN = 1), falling edge",
          "symbol": "VBOR1",
          "kind": "electrical",
          "unit": "V",
          "min": 1.95,
          "typ": 2,
          "max": 2.06,
          "conditions": "Falling edge, BORH_EN = 1",
          "source_page": 133,
          "source": "datasheet"
        },
        {
          "name": "Supply current in Run mode, fHCLK 250 MHz",
          "symbol": "IDD(Run)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 32.1,
          "max": 87,
          "conditions": "VOS0, all peripherals disabled, code from flash, 2-way I-cache, TJ = 105 °C, LDO; typ LDO",
          "source_page": 136,
          "source": "datasheet"
        },
        {
          "name": "Supply current in Run mode, fHCLK 200 MHz",
          "symbol": "IDD(Run)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 22.1,
          "max": 62,
          "conditions": "VOS1, all peripherals disabled, code from flash, 2-way I-cache, TJ = 105 °C, LDO; typ LDO",
          "source_page": 136,
          "source": "datasheet"
        },
        {
          "name": "Supply current in Run mode, fHCLK 150 MHz",
          "symbol": "IDD(Run)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 15.4,
          "max": 47,
          "conditions": "VOS2, all peripherals disabled, code from flash, 2-way I-cache, TJ = 105 °C, LDO; typ LDO",
          "source_page": 136,
          "source": "datasheet"
        },
        {
          "name": "Supply current in Run mode, fHCLK 100 MHz",
          "symbol": "IDD(Run)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 9.8,
          "max": 34,
          "conditions": "VOS3, all peripherals disabled, code from flash, 2-way I-cache, TJ = 105 °C, LDO; typ LDO",
          "source_page": 136,
          "source": "datasheet"
        },
        {
          "name": "Supply current in Sleep mode, fHCLK 250 MHz",
          "symbol": "IDD(sleep)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 7.3,
          "max": 61,
          "conditions": "VOS0, all peripherals disabled, TJ = 105 °C, LDO; typ LDO",
          "source_page": 140,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "stm32h563vgt6"
  ],
  "discovery_pitch": "STM32H563VGT6 (ST(意法半导体)) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm32h563vgt6.kicad_sym",
    "stm32h563vgt6.kicad_mod",
    "stm32h563vgt6.glb",
    "stm32h563vgt6.step",
    "stm32h563vgt6.lbr",
    "docs/hero.png",
    "docs/stm32h563vgt6-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stm32h563vgt6-hero.glb",
    "stm32h563vgt6-hero.overlay.json",
    "stm32h563vgt6-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}