main
History Download
Ray Initial commit: component/stm32g474cct6 f81803b

STM32G474CCT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

STM32G474CCT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Battery backup supply pin for RTC, backup registers and LSE oscillator, connected through an internal power switch (max 3 mA sink), operating range 1.55 V to 3.6 V.
2 PC13 bidirectional 5V-tolerant I/O (function after reset) usable as TIM1_BKIN/TIM1_CH1N/TIM8_CH4N/EVENTOUT or as WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT1; supplied through the backup power switch so output speed must not exceed 2 MHz with 30 pF load and it must not be used as a current source.
3 PC14-OSC32_IN bidirectional 5V-tolerant I/O usable as EVENTOUT or as the 32.768 kHz LSE crystal oscillator input OSC32_IN, supplied through the backup power switch (max 3 mA sink, 2 MHz/30 pF output limit).
4 PC15-OSC32_OUT bidirectional 5V-tolerant I/O usable as EVENTOUT or as the 32.768 kHz LSE crystal oscillator output OSC32_OUT, supplied through the backup power switch (max 3 mA sink, 2 MHz/30 pF output limit).
5 PF0-OSC_IN bidirectional FT_fa analog-switch I/O usable as ADC1_IN10/OSC_IN (HSE crystal input) or as I2C2_SDA, SPI2_NSS/I2S2_WS, TIM1_CH3N, EVENTOUT.
6 PF1-OSC_OUT bidirectional FT_a analog-switch I/O usable as ADC2_IN10/COMP3_INM/OSC_OUT (HSE crystal output) or as SPI2_SCK/I2S2_CK, EVENTOUT.
7 PG10-NRST bidirectional Bidirectional reset I/O with embedded weak pull-up resistor (NRST); also usable as MCO output or EVENTOUT.
8 PA0 bidirectional TT analog I/O (ADC12_IN1, COMP1_INM, COMP3_INP, WKUP1, RTC_TAMP2) usable as TIM2_CH1/TIM5_CH1, USART2_CTS, COMP1_OUT, TIM8_BKIN/ETR, TIM2_ETR or EVENTOUT.
9 PA1 bidirectional TT analog I/O (ADC12_IN2, COMP1_INP, OPAMP1/3_VINP, OPAMP6_VINM) usable as RTC_REFIN, TIM2_CH2/TIM5_CH2, USART2_RTS_DE, TIM15_CH1N or EVENTOUT.
10 PA2 bidirectional FT analog I/O (ADC1_IN3, COMP2_INM, OPAMP1_VOUT, WKUP4/LSCO) usable as TIM2_CH3/TIM5_CH3, USART2_TX, COMP2_OUT, TIM15_CH1, QUADSPI1_BK1_NCS, LPUART1_TX, UCPD1_FRSTX or EVENTOUT.
11 PA3 bidirectional TT analog I/O (ADC1_IN4, COMP2_INP, OPAMP1_VINM/VINP, OPAMP5_VINM) usable as TIM2_CH4/TIM5_CH4, SAI1_CK1/MCLK_A, USART2_RX, TIM15_CH2, QUADSPI1_CLK, LPUART1_RX or EVENTOUT.
12 PA4 bidirectional TT analog I/O (ADC2_IN17, DAC1_OUT1, COMP1_INM) usable as TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, SAI1_FS_B or EVENTOUT.
13 PA5 bidirectional TT analog I/O (ADC2_IN13, DAC1_OUT2, COMP2_INM, OPAMP2_VINM) usable as TIM2_CH1/ETR, SPI1_SCK, UCPD1_FRSTX or EVENTOUT.
14 PA6 bidirectional TT analog I/O (ADC2_IN3, DAC2_OUT1, OPAMP2_VOUT) usable as TIM16_CH1/TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM1_BKIN, COMP1_OUT, QUADSPI1_BK1_IO3, LPUART1_CTS or EVENTOUT.
15 PA7 bidirectional TT analog I/O (ADC2_IN4, COMP2_INP, OPAMP1_VINP, OPAMP2_VINP) usable as TIM17_CH1/TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM1_CH1N, COMP2_OUT, QUADSPI1_BK1_IO2, UCPD1_FRSTX or EVENTOUT.
16 PB0 bidirectional TT analog I/O (ADC3_IN12/ADC1_IN15, COMP4_INP, OPAMP2_VINP, OPAMP3_VINP) usable as TIM3_CH3, TIM8_CH2N, TIM1_CH2N, QUADSPI1_BK1_IO1, HRTIM1_FLT5, UCPD1_FRSTX or EVENTOUT.
17 PB1 bidirectional TT analog I/O (ADC3_IN1/ADC1_IN12, COMP1_INP, OPAMP3_VOUT, OPAMP6_VINM) usable as TIM3_CH4, TIM8_CH3N, TIM1_CH3N, COMP4_OUT, QUADSPI1_BK1_IO0, LPUART1_RTS_DE, HRTIM1_SCOUT or EVENTOUT.
18 PB2 bidirectional TT analog I/O (ADC2_IN12, COMP4_INM, OPAMP3_VINM) usable as RTC_OUT2, LPTIM1_OUT, TIM5_CH1, TIM20_CH1, I2C3_SMBA, QUADSPI1_BK2_IO1, HRTIM1_SCIN or EVENTOUT.
19 VSSA power_in Analog ground reference for the ADC/DAC/OPAMP/COMP/VREFBUF domain.
20 VREF+ power_in Positive analog reference supply pin, which can also be internally driven by the VREFBUF output; VREF+ must not exceed VDDA by more than 0.4 V.
21 VDDA power_in Analog supply voltage for ADC/DAC/OPAMP/COMP/VREFBUF, valid range 1.62 V to 3.6 V depending on which analog peripheral is used.
22 PB10 bidirectional TT analog I/O (COMP5_INM, OPAMP3_VINM, OPAMP4_VINM) usable as TIM2_CH3, USART3_TX, LPUART1_RX, QUADSPI1_CLK, TIM1_BKIN, HRTIM1_FLT3, SAI1_SCK_A or EVENTOUT.
23 VSS power_in Digital ground reference pin.
24 VDD power_in Digital supply input pin, standard operating voltage range 1.71 V to 3.6 V.
25 PB11 bidirectional TT analog I/O (ADC12_IN14, COMP6_INP, OPAMP4_VINP, OPAMP6_VOUT) usable as TIM2_CH4, USART3_RX, LPUART1_TX, QUADSPI1_BK1_NCS, HRTIM1_FLT4 or EVENTOUT.
26 PB12 bidirectional TT analog I/O (ADC4_IN3/ADC1_IN11, COMP7_INM, OPAMP4_VOUT, OPAMP6_VINP) usable as TIM5_ETR, I2C2_SMBA, SPI2_NSS/I2S2_WS, TIM1_BKIN, USART3_CK, LPUART1_RTS_DE, FDCAN2_RX, HRTIM1_CHC1 or EVENTOUT.
27 PB13 bidirectional TT analog I/O (ADC3_IN5, COMP5_INP, OPAMP3/4/6_VINP) usable as SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, LPUART1_CTS, FDCAN2_TX, HRTIM1_CHC2 or EVENTOUT.
28 PB14 bidirectional TT analog I/O (ADC4_IN4/ADC1_IN5, COMP7_INP, OPAMP2_VINP, OPAMP5_VINP) usable as TIM15_CH1, SPI2_MISO, TIM1_CH2N, USART3_RTS_DE, COMP4_OUT, HRTIM1_CHD1 or EVENTOUT.
29 PB15 bidirectional TT analog I/O (ADC4_IN5/ADC2_IN15, COMP6_INM, OPAMP5_VINM) usable as RTC_REFIN, TIM15_CH2/CH1N, COMP3_OUT, TIM1_CH3N, SPI2_MOSI/I2S2_SD, HRTIM1_CHD2 or EVENTOUT.
30 PA8 bidirectional FT_a analog I/O (ADC5_IN1, OPAMP5_VOUT) usable as MCO, I2C3_SCL, I2C2_SDA, I2S2_MCK, TIM1_CH1, USART1_CK, COMP7_OUT, TIM4_ETR, FDCAN3_RX, SAI1_CK2/SCK_A, HRTIM1_CHA1 or EVENTOUT.
31 PA9 bidirectional FT_fda I/O (ADC5_IN2, UCPD1_DBCC1) usable as I2C3_SMBA, I2C2_SCL, I2S3_MCK, TIM1_CH2, USART1_TX, COMP5_OUT, TIM15_BKIN, TIM2_CH3, HRTIM1_CHA2, SAI1_FS_A or EVENTOUT.
32 PA10 bidirectional FT_fda I/O (UCPD1_DBCC2) usable as TIM17_BKIN, USB_CRS_SYNC, I2C2_SMBA, SPI2_MISO, TIM1_CH3, USART1_RX, COMP6_OUT, TIM2_CH4, TIM8_BKIN, SAI1_D1/SD_A, HRTIM1_CHB1 or EVENTOUT.
33 PA11 bidirectional FT_u USB-capable I/O carrying USB_DM, alternatively usable as SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX, TIM4_CH1, TIM1_CH4, TIM1_BKIN2, HRTIM1_CHB2 or EVENTOUT.
34 PA12 bidirectional FT_u USB-capable I/O carrying USB_DP, alternatively usable as TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX, TIM4_CH2, TIM1_ETR, HRTIM1_FLT1 or EVENTOUT.
35 VSS power_in Digital ground reference pin.
36 VDD power_in Digital supply input pin, standard operating voltage range 1.71 V to 3.6 V.
37 PA13 bidirectional FT_f I/O configured after reset as the SWDIO/JTMS debug function with internal pull-up active; also usable as TIM16_CH1N, I2C4_SCL, I2C1_SCL, IR_OUT, USART3_CTS, TIM4_CH3, SAI1_SD_B or EVENTOUT.
38 PA14 bidirectional FT_f I/O configured after reset as the SWCLK/JTCK debug function with internal pull-down active; also usable as LPTIM1_OUT, I2C4_SMBA, I2C1_SDA, TIM8_CH2, TIM1_BKIN, USART2_TX, SAI1_FS_B or EVENTOUT.
39 PA15 bidirectional FT_f I/O configured after reset as the JTDI debug function with internal pull-up active; also usable as TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_RX, UART4_RTS_DE, TIM1_BKIN, FDCAN3_TX, HRTIM1_FLT2, TIM2_ETR or EVENTOUT.
40 PB3 bidirectional FT I/O configured after reset as the JTDO/TRACESWO debug function; also usable as TIM2_CH2, TIM4_ETR, UCPD1_CRS_SYNC, TIM8_CH1N, SPI1_SCK, SPI3_SCK/I2S3_CK, USART2_TX, TIM3_ETR, FDCAN3_RX, HRTIM1_SCOUT/EEV9, SAI1_SCK_B or EVENTOUT.
41 PB4 bidirectional FT_c USB Type-C PD capable I/O configured after reset as the JTRST debug function with internal pull-up active (UCPD1_CC2); also usable as TIM16_CH1, TIM3_CH1, TIM8_CH2N, SPI1_MISO, SPI3_MISO, USART2_RX, UART5_RTS_DE, TIM17_BKIN, FDCAN3_TX, HRTIM1_EEV7, SAI1_MCLK_B or EVENTOUT.
42 PB5 bidirectional FT_f I/O usable as TIM16_BKIN, TIM3_CH2, TIM8_CH3N, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, USART2_CK, I2C3_SDA, FDCAN2_RX, TIM17_CH1, LPTIM1_IN1, SAI1_SD_B, HRTIM1_EEV6, UART5_CTS or EVENTOUT.
43 PB6 bidirectional FT_c USB Type-C PD capable I/O (UCPD1_CC1) usable as TIM16_CH1N, TIM4_CH1, TIM8_CH1/ETR, USART1_TX, COMP4_OUT, FDCAN2_TX, TIM8_BKIN2, LPTIM1_ETR, HRTIM1_SCIN/EEV4, SAI1_FS_B or EVENTOUT.
44 PB7 bidirectional FT_f I/O carrying PVD_IN, usable as TIM17_CH1N, TIM4_CH2, I2C4_SDA, I2C1_SDA, TIM8_BKIN, USART1_RX, COMP3_OUT, TIM3_CH4, LPTIM1_IN2, FMC_NL, HRTIM1_EEV3, UART4_CTS or EVENTOUT.
45 PB8-BOOT0 bidirectional FT_f dedicated BOOT0-sampling I/O that selects the boot mode at reset; recommended to configure it to a non-analog mode after startup if left unconnected to limit consumption; also usable as TIM16_CH1, TIM4_CH3, SAI1_CK1/MCLK_A, I2C1_SCL, USART3_RX, COMP1_OUT, FDCAN1_RX, TIM8_CH2, TIM1_BKIN, HRTIM1_EEV8 or EVENTOUT.
46 PB9 bidirectional FT_f I/O usable as TIM17_CH1, TIM4_CH4, SAI1_D2/FS_A, I2C1_SDA, IR_OUT, USART3_TX, COMP2_OUT, FDCAN1_TX, TIM8_CH3, TIM1_CH3N, HRTIM1_EEV5 or EVENTOUT.
47 VSS power_in Digital ground reference pin.
48 VDD power_in Digital supply input pin, standard operating voltage range 1.71 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

CAD (KiCad official)

  • Symbol: STM32G474CCT6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32g474cct6-etched.step / stm32g474cct6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32g474cct6.step / stm32g474cct6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (236 pp, sha256 d493fe0ab22e61ff, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF