main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stm32g431kbu3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers stm32g431kbu3: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md stm32g431kbu3: factory component page (tier=lcsc) · Ray
stm32g431kbu3-etched.fit.json stm32g431kbu3: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32g431kbu3-etched.glb stm32g431kbu3: factory component page (tier=lcsc) · Ray
stm32g431kbu3-etched.step stm32g431kbu3: factory component page (tier=lcsc) · Ray
stm32g431kbu3-hero.glb Publish 0.1.1 · Ray
stm32g431kbu3-hero.overlay.json Publish 0.1.1 · Ray
stm32g431kbu3.glb Publish 0.1.0 · Ray
stm32g431kbu3.kicad_mod stm32g431kbu3: factory component page (tier=lcsc) · Ray
stm32g431kbu3.kicad_sym stm32g431kbu3: factory component page (tier=lcsc) · Ray
stm32g431kbu3.lbr stm32g431kbu3: factory component page (tier=lcsc) · Ray
stm32g431kbu3.step Publish 0.1.0 · Ray

STM32G431KBU3

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)

STM32G431KBU3 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Standard operating voltage 1.71 V to 3.6 V; all VDD pins must be connected to the external supply within the permitted range.
2 PF0-OSC_IN bidirectional 5 V tolerant FT_fa I/O (Fm+ capable, analog switch supplied by VDDA) with alternate functions I2C2_SDA, SPI2_NSS/I2S2_WS, TIM1_CH3N and EVENTOUT, and additional functions ADC1_IN10 and OSC_IN (HSE oscillator input).
3 PF1-OSC_OUT bidirectional FT_a I/O (analog switch supplied by VDDA) with alternate functions SPI2_SCK/I2S2_CK and EVENTOUT, and additional functions ADC2_IN10, COMP3_INM and OSC_OUT (HSE oscillator output).
4 PG10-NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor (NRST); it also provides the MCO alternate function and EVENTOUT.
5 PA0 bidirectional 3.6 V tolerant TT_a I/O (analog switch supplied by VDDA) with alternate functions TIM2_CH1, USART2_CTS, COMP1_OUT, TIM8_BKIN, TIM8_ETR, TIM2_ETR and EVENTOUT, and additional functions ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2 and WKUP1.
6 PA1 bidirectional 3.6 V tolerant TT_a I/O (analog switch supplied by VDDA) with alternate functions RTC_REFIN, TIM2_CH2, USART2_RTS_DE, TIM15_CH1N and EVENTOUT, and additional functions ADC12_IN2, COMP1_INP, OPAMP1_VINP and OPAMP3_VINP.
7 PA2 bidirectional 3.6 V tolerant TT_a I/O (analog switch supplied by VDDA) with alternate functions TIM2_CH3, USART2_TX, COMP2_OUT, TIM15_CH1, LPUART1_TX, UCPD1_FRSTX and EVENTOUT, and additional functions ADC1_IN3, COMP2_INM, OPAMP1_VOUT and WKUP4/LSCO.
8 PA3 bidirectional 3.6 V tolerant TT_a I/O (analog switch supplied by VDDA) with alternate functions TIM2_CH4, SAI1_CK1, USART2_RX, TIM15_CH2, LPUART1_RX, SAI1_MCLK_A and EVENTOUT, and additional functions ADC1_IN4, COMP2_INP and OPAMP1_VINM/OPAMP1_VINP.
9 PA4 bidirectional 3.6 V tolerant TT_a I/O (analog switch supplied by VDDA) with alternate functions TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, SAI1_FS_B and EVENTOUT, and additional functions ADC2_IN17, DAC1_OUT1 and COMP1_INM.
10 PA5 bidirectional 3.6 V tolerant TT_a I/O (analog switch supplied by VDDA) with alternate functions TIM2_CH1, TIM2_ETR, SPI1_SCK, UCPD1_FRSTX and EVENTOUT, and additional functions ADC2_IN13, DAC1_OUT2, COMP2_INM and OPAMP2_VINM.
11 PA6 bidirectional 3.6 V tolerant TT_a I/O (analog switch supplied by VDDA) with alternate functions TIM16_CH1, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM1_BKIN, COMP1_OUT, LPUART1_CTS and EVENTOUT, and additional functions ADC2_IN3 and OPAMP2_VOUT.
12 PA7 bidirectional 3.6 V tolerant TT_a I/O (analog switch supplied by VDDA) with alternate functions TIM17_CH1, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM1_CH1N, COMP2_OUT, UCPD1_FRSTX and EVENTOUT, and additional functions ADC2_IN4, COMP2_INP, OPAMP1_VINP and OPAMP2_VINP.
13 PB0 bidirectional 3.6 V tolerant TT_a I/O (analog switch supplied by VDDA) with alternate functions TIM3_CH3, TIM8_CH2N, TIM1_CH2N, UCPD1_FRSTX and EVENTOUT, and additional functions ADC1_IN15, COMP4_INP, OPAMP2_VINP and OPAMP3_VINP.
14 VSSA power_in Analog ground pin for the ADC, DAC, OPAMP, COMP and VREFBUF blocks; all ground pins must be kept within 50 mV of VSS.
15 VDDA/VREF+ power_in Analog supply pin shared with the VREF+ reference input on this package (VREFBUF_OUT as the alternate option); VDDA is 1.62 V to 3.6 V for ADC or COMP use, 1.71 V to 3.6 V for DAC 1 MSPS or 15 MSPS use, and VREF+ must not exceed VDDA by more than 0.4 V.
16 VSS power_in Ground pin; all VSS pins must be connected to the external ground within the permitted range.
17 VDD power_in Standard operating voltage 1.71 V to 3.6 V; all VDD pins must be connected to the external supply within the permitted range.
18 PA8 bidirectional 5 V tolerant FT_f I/O (Fm+ capable) with alternate functions MCO, I2C3_SCL, I2C2_SDA, I2S2_MCK, TIM1_CH1, USART1_CK, TIM4_ETR, SAI1_CK2, SAI1_SCK_A and EVENTOUT.
19 PA9 bidirectional 5 V tolerant FT_fd I/O (Fm+ capable, USB Type-C dead battery function) with alternate functions I2C3_SMBA, I2C2_SCL, I2S3_MCK, TIM1_CH2, USART1_TX, TIM15_BKIN, TIM2_CH3, SAI1_FS_A and EVENTOUT, and additional function UCPD1_DBCC1.
20 PA10 bidirectional 5 V tolerant FT_da I/O (USB Type-C dead battery function) with alternate functions TIM17_BKIN, USB_CRS_SYNC, I2C2_SMBA, SPI2_MISO, TIM1_CH3, USART1_RX, TIM2_CH4, TIM8_BKIN, SAI1_D1, SAI1_SD_A and EVENTOUT, and additional function UCPD1_DBCC2.
21 PA11 bidirectional 5 V tolerant FT_u I/O with USB function, alternate functions SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX, TIM4_CH1, TIM1_CH4, TIM1_BKIN2 and EVENTOUT, and additional function USB_DM.
22 PA12 bidirectional 5 V tolerant FT_u I/O with USB function, alternate functions TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX, TIM4_CH2, TIM1_ETR and EVENTOUT, and additional function USB_DP.
23 PA13 bidirectional 5 V tolerant FT_f I/O (Fm+ capable) that after reset is the SWDIO-JTMS debug alternate function with an internal pull-up enabled; other alternate functions are TIM16_CH1N, I2C1_SCL, IR_OUT, USART3_CTS, TIM4_CH3, SAI1_SD_B and EVENTOUT.
24 PA14 bidirectional 5 V tolerant FT_f I/O (Fm+ capable) that after reset is the SWCLK-JTCK debug alternate function with an internal pull-down enabled; other alternate functions are LPTIM1_OUT, I2C1_SDA, TIM8_CH2, TIM1_BKIN, USART2_TX, SAI1_FS_B and EVENTOUT.
25 PA15 bidirectional 5 V tolerant FT_f I/O (Fm+ capable) that after reset is the JTDI debug alternate function with an internal pull-up enabled; other alternate functions are TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_RX, UART4_RTS_DE, TIM1_BKIN, TIM2_ETR and EVENTOUT.
26 PB3 bidirectional 5 V tolerant FT I/O that after reset is the JTDO-TRACESWO debug alternate function; other alternate functions are TIM2_CH2, TIM4_ETR, USB_CRS_SYNC, TIM8_CH1N, SPI1_SCK, SPI3_SCK/I2S3_CK, USART2_TX, TIM3_ETR, SAI1_SCK_B and EVENTOUT.
27 PB4 bidirectional 5 V tolerant FT_c I/O (USB Type-C PD capable) that after reset is the JTRST debug alternate function with an internal pull-up enabled and a UCPD pull-down (Rd 5.1 kΩ) that can be disabled through UCPD1_DBDIS; other alternate functions are TIM16_CH1, TIM3_CH1, TIM8_CH2N, SPI1_MISO, SPI3_MISO, USART2_RX, TIM17_BKIN, SAI1_MCLK_B, EVENTOUT and additional function UCPD1_CC2.
28 PB5 bidirectional 5 V tolerant FT_f I/O (Fm+ capable) with alternate functions TIM16_BKIN, TIM3_CH2, TIM8_CH3N, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, USART2_CK, I2C3_SDA, TIM17_CH1, LPTIM1_IN1, SAI1_SD_B and EVENTOUT.
29 PB6 bidirectional 5 V tolerant FT_c I/O (USB Type-C PD capable) with alternate functions TIM16_CH1N, TIM4_CH1, TIM8_CH1, TIM8_ETR, USART1_TX, COMP4_OUT, TIM8_BKIN2, LPTIM1_ETR, SAI1_FS_B and EVENTOUT, and additional function UCPD1_CC1 with a 5.1 kΩ pull-down that is enabled after reset as controlled by PA9.
30 PB7 bidirectional 5 V tolerant FT_f I/O (Fm+ capable) with alternate functions TIM17_CH1N, TIM4_CH2, I2C1_SDA, TIM8_BKIN, USART1_RX, COMP3_OUT, TIM3_CH4, LPTIM1_IN2, UART4_CTS and EVENTOUT, and additional function PVD_IN.
31 PB8-BOOT0 input Dedicated BOOT0 pin, 5 V tolerant FT_f I/O (Fm+ capable) that also provides TIM16_CH1, TIM4_CH3, SAI1_CK1, I2C1_SCL, USART3_RX, COMP1_OUT, FDCAN1_RX, TIM8_CH2, TIM1_BKIN, SAI1_MCLK_A and EVENTOUT; it is recommended to set PB8 out of analog mode after startup to limit consumption if left unconnected.
32 VSS power_in Ground pin; all VSS pins must be connected to the external ground within the permitted range.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (VDD, VDDA, VBAT, VREF+) VDD - VSS -0.3 4 V 69
Input voltage on FT_xxx pins except FT_c VIN -0.3 V Min is VSS-0.3; max printed as min(VDD, VDDA)+4.0 V (footnotes 3, 4), not a number 69
Input voltage on FT_c pins VIN -0.3 5.5 V Min is VSS-0.3 69
Input voltage on TT_xx pins VIN -0.3 4 V Min is VSS-0.3 69
Input voltage on any other pins VIN -0.3 4 V Min is VSS-0.3 69
Variations between different VDDX power pins of the same domain /ΔVDDx/ 50 mV 69
Variations between all the different ground pins (includes VREF-) /VSSx-VSS/ 50 mV 69
Allowed voltage difference for VREF+ > VDDA VREF+-VDDA 0.4 V 69
Total current into sum of all VDD power lines (source) ∑IVDD 150 mA 70
Total current out of sum of all VSS ground lines (sink) ∑IVSS 150 mA 70
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 70
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 70
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 20 mA 70
Output current sunk by any FT_f pin IIO(PIN) 20 mA 70
Output current sourced by any I/O and control pin IIO(PIN) 20 mA 70
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 70
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 70
Injected current on FT_xxx, TT_xx, NRST pins IINJ(PIN) -5 0 mA 70
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 70
Storage temperature range TSTG -65 150 °C 70
Maximum junction temperature TJ 150 °C 70
Internal AHB clock frequency fHCLK 0 170 MHz 71
Internal APB1 clock frequency fPCLK1 0 170 MHz 71
Internal APB2 clock frequency fPCLK2 0 170 MHz 71
Standard operating voltage VDD 1.71 3.6 V 71
Analog supply voltage VDDA 1.62 3.6 V ADC or COMP used 71
Analog supply voltage VDDA 1.71 3.6 V DAC 1 MSPS or DAC 15 MSPS 71
Analog supply voltage VDDA 2 3.6 V OPAMP used 71
Analog supply voltage VDDA 2.4 3.6 V VREFBUF used 71
Analog supply voltage VDDA 0 3.6 V ADC, DAC, OPAMP, COMP, VREFBUF not used 71
Backup operating voltage VBAT 1.55 3.6 V 71
I/O input voltage on TT_xx I/O VIN -0.3 V Max printed as VDD+0.3 V, not a number 71
I/O input voltage on FT_c I/O VIN -0.3 5 V 71
I/O input voltage on all I/O except TT_xx and FT_c VIN -0.3 V Max printed as MIN(MIN(VDD, VDDA)+3.6 V, 5.5 V), not a number 71
Ambient temperature, maximum power dissipation TA -40 125 °C Suffix 3 version 71
Ambient temperature, low-power dissipation TA -40 130 °C Suffix 3 version 71
Junction temperature range TJ -40 130 °C Suffix 3 version 71
VDD rise time rate tVDD 0 µs/V Max printed as ∞, not a number 72
VDD fall time rate tVDD 10 µs/V Max printed as ∞, not a number 72
VDDA rise time rate tVDDA 0 µs/V Max printed as ∞, not a number 72
VDDA fall time rate tVDDA 10 µs/V Max printed as ∞, not a number 72
Reset temporization after BOR0 is detected tRSTTEMPO 250 400 μs VDD rising 72
Brown-out reset threshold 0, rising edge VBOR0 1.62 1.66 1.7 V Rising edge 72
Brown-out reset threshold 0, falling edge VBOR0 1.6 1.64 1.69 V Falling edge 72
Brown-out reset threshold 1, rising edge VBOR1 2.06 2.1 2.14 V Rising edge 72
Brown-out reset threshold 1, falling edge VBOR1 1.96 2 2.04 V Falling edge 72
Brown-out reset threshold 2, rising edge VBOR2 2.26 2.31 2.35 V Rising edge 72
Brown-out reset threshold 2, falling edge VBOR2 2.16 2.2 2.24 V Falling edge 72
Brown-out reset threshold 3, rising edge VBOR3 2.56 2.61 2.66 V Rising edge 72
Brown-out reset threshold 3, falling edge VBOR3 2.47 2.52 2.57 V Falling edge 72
Brown-out reset threshold 4, rising edge VBOR4 2.85 2.9 2.95 V Rising edge 72
Brown-out reset threshold 4, falling edge VBOR4 2.76 2.81 2.86 V Falling edge 72
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +130 °C 74
Start time of reference voltage buffer tstart_vrefint 8 12 µs when ADC is enabled 74
Average temperature coefficient TCoeff 30 50 ppm/°C -40°C < TA < +130°C 74
Average voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 74

CAD (KiCad official)

  • Symbol: STM32G431KBU3
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: stm32g431kbu3-etched.step / stm32g431kbu3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32g431kbu3.step / stm32g431kbu3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (197 pp, sha256 caaa126a00ab9e06, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF