3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32G0B1KCU7
STMicroelectronics · IC · UFQFPN-32(5x5)
STM32G0B1KCU7 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB9 | bidirectional | 5 V-tolerant FT I/O with Fm+ capability; alternate functions include IR_OUT, UCPD2_FRSTX, TIM17_CH1, FDCAN1_TX, USART3_RX, SPI2_NSS/I2S2_WS, I2C1_SDA, USART6_RX and TIM4_CH4. |
| 2 | PC14-OSC32_IN | bidirectional | FT I/O supplied through the power switch (limited to 3 mA, output limited to 2 MHz with 30 pF and current sink only) that also serves as the 32.768 kHz LSE oscillator input OSC32_IN. |
| 3 | PC15-OSC32_OUT | bidirectional | FT I/O supplied through the power switch (limited to 3 mA, output limited to 2 MHz with 30 pF and current sink only) that also serves as the 32.768 kHz LSE oscillator output OSC32_OUT. |
| 4 | VDD/VDDA | power_in | Main supply and analog supply pin, 1.7 V to 3.6 V for VDD, with VDDA at least 1.62 V for ADC and COMP, 1.8 V for DAC and 2.4 V for VREFBUF. |
| 5 | VSS/VSSA | power_in | Ground reference pin for the digital (VSS) and analog (VSSA) domains. |
| 6 | PF2-NRST | bidirectional | Reset pin with embedded weak pull-up, RST input structure when configured as reset and FT structure when used as GPIO; alternate functions include MCO, LPUART2_TX and LPUART2_RTS_DE. |
| 7 | PA0 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function; additional functions include ADC_IN0, COMP1_INM8, TAMP_IN2 and WKUP1. |
| 8 | PA1 | bidirectional | 5 V-tolerant FT_ea I/O with analog switch function and switchable diode to VDDIOx; additional functions include ADC_IN1 and COMP1_INP2. |
| 9 | PA2 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function; additional functions include ADC_IN2, COMP2_INM8, WKUP4 and LSCO. |
| 10 | PA3 | bidirectional | 5 V-tolerant FT_ea I/O with switchable diode to VDDIOx; additional functions include ADC_IN3 and COMP2_INP2. |
| 11 | PA4 | bidirectional | TT_a I/O, 3.6 V tolerant with analog switch function; additional functions include ADC_IN4, DAC1_OUT1, TAMP_IN1, RTC_TS, RTC_OUT1 and WKUP2. |
| 12 | PA5 | bidirectional | TT_ea I/O, 3.6 V tolerant with analog switch function; additional functions include ADC_IN5 and DAC1_OUT2. |
| 13 | PA6 | bidirectional | 5 V-tolerant FT_ea I/O with switchable diode to VDDIOx; additional function ADC_IN6. |
| 14 | PA7 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function; additional function ADC_IN7. |
| 15 | PB0 | bidirectional | 5 V-tolerant FT_ea I/O with switchable diode to VDDIOx; additional functions include COMP3_INP0 and ADC_IN8. |
| 16 | PB1 | bidirectional | 5 V-tolerant FT_ea I/O with switchable diode to VDDIOx; additional functions include COMP1_INM6 and ADC_IN9. |
| 17 | PB2 | bidirectional | 5 V-tolerant FT_ea I/O with switchable diode to VDDIOx; additional functions include COMP1_INP1, COMP3_INM6 and ADC_IN10. |
| 18 | PA8 | bidirectional | 5 V-tolerant FT_fcs I/O (Fm+ capable, USB Type-C PD capable, supplied from VDDIO2 only) with alternate functions MCO, SPI2_NSS/I2S2_WS, TIM1_CH1, CRS1_SYNC and LPTIM2_OUT; a pull-down may be present at reset. |
| 19 | PA9 | bidirectional | 5 V-tolerant FT_fds I/O (Fm+ capable, USB Type-C PD dead battery capable) with alternate functions MCO, USART1_TX, TIM1_CH2, SPI2_MISO/I2S2_MCK and I2C1_SCL. |
| 20 | PC6 | bidirectional | 5 V-tolerant FT_s I/O supplied from VDDIO2 only with alternate functions UCPD1_FRSTX, TIM3_CH1, TIM2_CH3 and LPUART2_TX. |
| 21 | PA10 | bidirectional | 5 V-tolerant FT_fds I/O (Fm+ capable, USB Type-C PD dead battery capable) with alternate functions SPI2_MOSI/I2S2_SD, USART1_RX, TIM1_CH3, MCO2 and I2C1_SDA. |
| 22 | PA11 [PA9] | bidirectional | 5 V-tolerant FT_fus I/O with USB function (USB_DM) and alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4 and I2C2_SCL. |
| 23 | PA12 [PA10] | bidirectional | 5 V-tolerant FT_fus I/O with USB function (USB_DP) and alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR and FDCAN1_TX. |
| 24 | PA13 | bidirectional | 5 V-tolerant FT_es I/O which, after reset, is the SWDIO debug function with internal pull-up enabled; alternate functions include IR_OUT and USB_NOE. |
| 25 | PA14-BOOT0 | bidirectional | 5 V-tolerant FT_s I/O which, after reset, is the SWCLK debug function with internal pull-down enabled; it is also the BOOT0 boot-mode pin. |
| 26 | PA15 | bidirectional | 5 V-tolerant FT_s I/O supplied from VDDIO2 only with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, MCO2 and USB_NOE. |
| 27 | PB3 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function; alternate functions include SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART5_TX, I2C3_SCL and SPI3_SCK. |
| 28 | PB4 | bidirectional | 5 V-tolerant FT_a I/O with analog switch function; alternate functions include SPI1_MISO/I2S1_MCK, TIM3_CH1, USART5_RX, TIM17_BKIN, I2C3_SDA and SPI3_MISO; additional function COMP2_INP0. |
| 29 | PB5 | bidirectional | 5 V-tolerant FT I/O with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, FDCAN2_RX, LPTIM1_IN1 and I2C1_SMBA; additional function WKUP6. |
| 30 | PB6 | bidirectional | 5 V-tolerant FT_fa I/O (Fm+ capable, analog switch function) with alternate functions USART1_TX, TIM1_CH3, FDCAN2_TX, LPTIM1_ETR and I2C1_SCL; additional function COMP2_INP1. |
| 31 | PB7 | bidirectional | 5 V-tolerant FT_fa I/O (Fm+ capable, analog switch function) with alternate functions USART1_RX, SPI2_MOSI/I2S2_SD, TIM17_CH1N, LPTIM1_IN2 and I2C1_SDA; additional functions COMP2_INM7 and PVD_IN. |
| 32 | PB8 | bidirectional | 5 V-tolerant FT_f I/O (Fm+ capable) with alternate functions CEC, SPI2_SCK/I2S2_CK, TIM16_CH1, FDCAN1_RX, USART3_TX, TIM15_BKIN and I2C1_SCL. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External supply voltage | VDD | -0.3 | 4 | V | External supply voltage | 66 | |
| External supply voltage for selected I/Os | VDDIO2 | -0.3 | 4 | V | External supply voltage for selected I/Os | 66 | |
| External supply voltage on VBAT pin | VBAT | -0.3 | 4 | V | External supply voltage on VBAT pin | 66 | |
| Current into VDD/VDDA and VDDIO2 power pins (source) | IVDD/VDDA,VDDIO2 | 100 | mA | Current into VDD/VDDA and VDDIO2 power pins (source) | 66 | ||
| Current out of VSS/VSSA and VSS ground pins (sink) | IVSS/VSSA,VSS | 100 | mA | Current out of VSS/VSSA and VSS ground pins (sink) | 66 | ||
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | 15 | mA | Output current sunk by any I/O and control pin except FT_f | 67 | ||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | Output current sunk by any FT_f pin | 67 | ||
| Output current sourced by any I/O and control pin | IIO(PIN) | 15 | mA | Output current sourced by any I/O and control pin | 67 | ||
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | 80 | mA | Total output current sunk by sum of all I/Os and control pins | 67 | ||
| Injected current on a FT_xx pin | IINJ(PIN) | -5 | mA | Injected current on a FT_xx pin | 67 | ||
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | Total injected current (sum of all I/Os and control pins) | 67 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | Storage temperature range | 67 | |
| Maximum junction temperature | TJ | 150 | °C | Maximum junction temperature | 67 | ||
| Internal AHB clock frequency | fHCLK | 0 | 64 | MHz | 67 | ||
| Internal APB clock frequency | fPCLK | 0 | 64 | MHz | 67 | ||
| Standard operating voltage | VDD | 1.7 | 3.6 | V | Standard operating voltage | 67 | |
| External supply voltage for selected I/Os | VDDIO2 | 1.65 | 3.6 | V | External supply voltage for selected I/Os | 67 | |
| Analog supply voltage for ADC and COMP operation | VDDA | 1.62 | 3.6 | V | For ADC and COMP operation | 67 | |
| Analog supply voltage for DAC operation | VDDA | 1.8 | 3.6 | V | For DAC operation | 67 | |
| Analog supply voltage for VREFBUF operation | VDDA | 2.4 | 3.6 | V | For VREFBUF operation | 67 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | Backup operating voltage | 67 | |
| Ambient temperature, temperature range suffix 7 | TA | -40 | 105 | °C | Suffix 7 ambient temperature | 68 | |
| Junction temperature, temperature range suffix 7 | TJ | -40 | 125 | °C | Suffix 7 junction temperature | 68 | |
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 250 | 400 | µs | VDD rising | 68 | |
| Power-on reset threshold | VPOR | 1.62 | 1.66 | 1.7 | V | 68 | |
| Power-down reset threshold | VPDR | 1.6 | 1.64 | 1.69 | V | 68 | |
| Brownout reset threshold 1, VDD rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 68 |
| Brownout reset threshold 1, VDD falling | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 68 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40°C < TJ < 130°C | 70 |
| Temperature coefficient of VREFINT | TCoeff_vrefint | 30 | 50 | ppm/°C | 70 | ||
| HSI16 Frequency | fHSI16 | 15.88 | 16.08 | MHz | VDD=3.0 V, TA=30 °C | 86 | |
| HSI16 oscillator frequency drift over temperature | ΔTemp(HSI16) | -1 | 1 | % | TA= 0 to 85 °C | 86 | |
| HSI16 oscillator frequency drift over temperature | ΔTemp(HSI16) | -2 | 1.5 | % | TA= -40 to 125 °C | 86 | |
| HSI48 Frequency | fHSI48 | 48 | MHz | VDD=3.0V, TA=30°C | 87 | ||
| Accuracy of the HSI48 oscillator over temperature (factory calibrated) | ACCHSI48_REL | -3 | 3 | % | VDD = 3.0 V to 3.6 V, TA = -15 to 85 °C | 87 | |
| Accuracy of the HSI48 oscillator over temperature (factory calibrated) | ACCHSI48_REL | -4.5 | 4.5 | % | VDD = 1.65 V to 3.6 V, TA = -40 to 125 °C | 87 | |
| LSI frequency | fLSI | 29.5 | 34 | kHz | VDD = 1.62 V to 3.6 V, TA = -40 to 125 °C | 88 | |
| LSI frequency | fLSI | 31.04 | 32.96 | kHz | VDD = 3.0 V, TA = 30 °C | 88 | |
| PLL input clock frequency | fPLL_IN | 2.66 | 16 | MHz | 88 | ||
| PLL multiplier output clock P, Voltage scaling Range 1 | fPLL_P_OUT | 3.09 | 122 | MHz | Voltage scaling Range 1 | 88 | |
| PLL multiplier output clock P, Voltage scaling Range 2 | fPLL_P_OUT | 3.09 | 40 | MHz | Voltage scaling Range 2 | 88 | |
| PLL lock time | tLOCK | 15 | 40 | µs | 88 | ||
| High-speed external user clock source frequency, Voltage scaling Range 1 | fHSE_ext | 8 | 48 | MHz | Voltage scaling Range 1 | 81 | |
| High-speed external user clock source frequency, Voltage scaling Range 2 | fHSE_ext | 8 | 26 | MHz | Voltage scaling Range 2 | 81 | |
| HSE oscillator frequency | fOSC_IN | 4 | 8 | 48 | MHz | 83 | |
| HSE current consumption during startup | IDD(HSE) | 5.5 | mA | During startup | 83 | ||
| 64-bit programming time | tprog | 85 | 125 | µs | 89 | ||
| Page (2 Kbyte) erase time | tERASE | 22 | 40 | ms | 89 | ||
| Mass erase time | tME | 22.1 | 40.1 | ms | 89 | ||
| Endurance | NEND | 10 | kcycles | TA = -40 to +105 °C | 89 | ||
| Data retention | tRET | 30 | Years | 1 kcycle at TA = 85 °C | 89 | ||
| Data retention | tRET | 15 | Years | 1 kcycle at TA = 105 °C | 89 | ||
| Data retention | tRET | 7 | Years | 1 kcycle at TA = 125 °C | 89 | ||
| Data retention | tRET | 10 | Years | 10 kcycles at TA = 105 °C | 89 |
CAD (KiCad official)
- Symbol:
STM32G0B1KCU7 - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
stm32g0b1kcu7-etched.step/stm32g0b1kcu7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32g0b1kcu7.step/stm32g0b1kcu7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (165 pp, sha256
8433e47bc5da5cac, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).