component
STM32G0B1CET6
Public Made by Adomby adom
STMicroelectronics Embedded Processors & Controllers, LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
f377876
STM32G0B1CET6
STMicroelectronics · Embedded Processors & Controllers · LQFP-48(7x7)
STM32G0B1CET6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC13 | bidirectional | FT I/O supplied through the power switch with a 3 mA limit; in output mode it is limited to 2 MHz at 30 pF and can only be used as a current sink. |
| 2 | PC14-OSC32_IN | bidirectional | FT I/O supplied through the power switch (3 mA limit), serving as the 32.768 kHz LSE oscillator input OSC32_IN with the same output limits as PC13. |
| 3 | PC15-OSC32_OUT | bidirectional | FT I/O supplied through the power switch (3 mA limit), serving as the 32.768 kHz LSE oscillator output OSC32_OUT with the same output limits as PC13. |
| 4 | VBAT | power_in | Backup supply from 1.55 V to 3.6 V for the RTC, TAMP, LSE oscillator and backup registers when VDD is not present. |
| 5 | VREF+ | power_in | Analog reference input, or output of the internal voltage reference buffer; must equal VDDA when VDDA < 2 V and lie between 2 V and VDDA when VDDA >= 2 V. |
| 6 | VDD/VDDA | power_in | Main supply from 1.7 V to 3.6 V for the internal regulator, I/Os and analog blocks. |
| 7 | VSS/VSSA | power_in | Ground reference for the digital and analog circuitry. |
| 8 | PF0-OSC_IN | bidirectional | FT I/O that serves as the external crystal oscillator input OSC_IN. |
| 9 | PF1-OSC_OUT | bidirectional | FT I/O that serves as the external crystal oscillator output OSC_OUT. |
| 10 | PF2-NRST | bidirectional | RST I/O with weak pull-up that acts as the active-low reset input when configured as reset, and as an FT GPIO otherwise. |
| 11 | PA0 | bidirectional | FT_a I/O with analog switch function, providing ADC_IN0 and wakeup input WKUP1. |
| 12 | PA1 | bidirectional | FT_ea I/O with switchable diode to VDDIOx, providing ADC_IN1 and COMP1_INP2. |
| 13 | PA2 | bidirectional | FT_a I/O with analog switch function, providing ADC_IN2, COMP2_INM and wakeup input WKUP4. |
| 14 | PA3 | bidirectional | FT_ea I/O with switchable diode to VDDIOx, providing ADC_IN3 and COMP2_INP2. |
| 15 | PA4 | bidirectional | TT_a I/O (3.6 V tolerant) with analog switch function, providing ADC_IN4 and DAC1_OUT1. |
| 16 | PA5 | bidirectional | TT_ea I/O (3.6 V tolerant) with switchable diode to VDDIOx, providing ADC_IN5 and DAC1_OUT2. |
| 17 | PA6 | bidirectional | FT_ea I/O (5 V tolerant) with switchable diode to VDDIOx, providing ADC_IN6 and COMP1_OUT. |
| 18 | PA7 | bidirectional | FT_a I/O (5 V tolerant) with analog switch function, providing ADC_IN7 and COMP2_OUT. |
| 19 | PB0 | bidirectional | FT_ea I/O (5 V tolerant) with switchable diode to VDDIOx, providing ADC_IN8 and COMP3_INP0. |
| 20 | PB1 | bidirectional | FT_ea I/O (5 V tolerant) with switchable diode to VDDIOx, providing ADC_IN9 and COMP1_INM6. |
| 21 | PB2 | bidirectional | FT_ea I/O (5 V tolerant) with switchable diode to VDDIOx, providing ADC_IN10, COMP1_INP1 and COMP3_INM6. |
| 22 | PB10 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with analog switch function, providing ADC_IN11. |
| 23 | PB11 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with analog switch function, providing ADC_IN15. |
| 24 | PB12 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with analog switch function, providing ADC_IN16. |
| 25 | PB13 | bidirectional | FT_fs I/O (5 V tolerant, Fm+ capable), listed as supplied from VDDIO2 only. |
| 26 | PB14 | bidirectional | FT_fs I/O (5 V tolerant, Fm+ capable), listed as supplied from VDDIO2 only. |
| 27 | PB15 | bidirectional | FT_fcs I/O supplied from VDDIO2 only, with USB Type-C PD capability on UCPD1_CC2 and RTC_REFIN. |
| 28 | PA8 | bidirectional | FT_fcs I/O supplied from VDDIO2 only, with USB Type-C PD capability on UCPD1_CC1 and MCO output. |
| 29 | PA9 | bidirectional | FT_fds I/O supplied from VDDIO2 only, with USB Type-C dead-battery capability on UCPD1_DBCC1; can be remapped in place of PA11. |
| 30 | PC6 | bidirectional | FT_s I/O supplied from VDDIO2 only, with UCPD1_FRSTX and TIM3_CH1 alternate functions. |
| 31 | PC7 | bidirectional | FT_s I/O supplied from VDDIO2 only, with UCPD2_FRSTX and TIM3_CH2 alternate functions. |
| 32 | PA10 | bidirectional | FT_fds I/O supplied from VDDIO2 only, with USB Type-C dead-battery capability on UCPD1_DBCC2; can be remapped in place of PA12. |
| 33 | PA11 [PA9] | bidirectional | FT_fus I/O with USB full-speed D- function (USB_DM) in default mapping; can be remapped to PA9. |
| 34 | PA12 [PA10] | bidirectional | FT_fus I/O with USB full-speed D+ function (USB_DP) in default mapping; can be remapped to PA10. |
| 35 | PA13 | bidirectional | FT_es I/O that is configured as SWDIO debug function at reset, with internal pull-up activated. |
| 36 | PA14-BOOT0 | bidirectional | FT_s I/O configured as SWCLK debug function at reset with internal pull-down activated, and used as the BOOT0 boot-mode pin. |
| 37 | PA15 | bidirectional | FT_s I/O supplied from VDDIO2 only, with SPI1_NSS, USART2_RX and USB_NOE alternate functions. |
| 38 | PD0 | bidirectional | FT_cs I/O supplied from VDDIO2 only, with USB Type-C PD capability on UCPD2_CC1 and FDCAN1_RX alternate function. |
| 39 | PD1 | bidirectional | FT_ds I/O supplied from VDDIO2 only, with USB Type-C dead-battery capability on UCPD2_DBCC1 and FDCAN1_TX alternate function. |
| 40 | PD2 | bidirectional | FT_cs I/O supplied from VDDIO2 only, with USB Type-C PD capability on UCPD2_CC2 and USART5_RX alternate function. |
| 41 | PD3 | bidirectional | FT_ds I/O supplied from VDDIO2 only, with USB Type-C dead-battery capability on UCPD2_DBCC2 and USART5_TX alternate function. |
| 42 | PB3 | bidirectional | FT_a I/O with analog switch function, providing SPI1_SCK, I2C3_SCL and COMP2_INM6 functions. |
| 43 | PB4 | bidirectional | FT_a I/O with analog switch function, providing SPI1_MISO, I2C3_SDA and COMP2_INP0 functions. |
| 44 | PB5 | bidirectional | FT I/O with wakeup input WKUP6 and COMP2_OUT, SPI1_MOSI and FDCAN2_RX alternate functions. |
| 45 | PB6 | bidirectional | FT_fa I/O (Fm+ capable) with analog switch function, providing I2C1_SCL, USART1_TX and COMP2_INP1. |
| 46 | PB7 | bidirectional | FT_fa I/O (Fm+ capable) with analog switch function, providing I2C1_SDA, USART1_RX and COMP2_INM7/PVD_IN inputs. |
| 47 | PB8 | bidirectional | FT_f I/O (Fm+ capable) with CEC, I2C1_SCL and USART3_TX alternate functions. |
| 48 | PB9 | bidirectional | FT_f I/O (Fm+ capable) with IR_OUT, I2C1_SDA and USART3_RX alternate functions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External supply voltage | VDD | -0.3 | 4 | V | 66 | ||
| External supply voltage for selected I/Os | VDDIO2 | -0.3 | 4 | V | 66 | ||
| External supply voltage on VBAT pin | VBAT | -0.3 | 4 | V | 66 | ||
| Input voltage on FT_c pins | VIN | -0.3 | 5.5 | V | Input voltage on FT_c pins | 66 | |
| Input voltage on any other pin | VIN | -0.3 | 4 | V | Input voltage on any other pin | 66 | |
| Current into VDD/VDDA and VDDIO2 power pins (source) | IVDD/VDDA,VDDIO2 | 100 | mA | 66 | |||
| Current out of VSS/VSSA and VSS ground pins (sink) | IVSS/VSSA,VSS | 100 | mA | 66 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 67 | ||
| Maximum junction temperature | TJ | 150 | °C | 67 | |||
| Internal AHB clock frequency | fHCLK | 0 | 64 | MHz | 67 | ||
| Internal APB clock frequency | fPCLK | 0 | 64 | MHz | 67 | ||
| Standard operating voltage | VDD | 1.7 | 3.6 | V | Standard operating voltage | 67 | |
| External supply voltage for selected I/Os | VDDIO2 | 1.65 | 3.6 | V | External supply voltage for selected I/Os | 67 | |
| Analog supply voltage for ADC and COMP operation | VDDA | 1.62 | 3.6 | V | For ADC and COMP operation | 67 | |
| Analog supply voltage for DAC operation | VDDA | 1.8 | 3.6 | V | For DAC operation | 67 | |
| Analog supply voltage for VREFBUF operation | VDDA | 2.4 | 3.6 | V | For VREFBUF operation | 67 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 67 | ||
| Ambient temperature, suffix 6 | TA | -40 | 85 | °C | Suffix 6 | 68 | |
| Junction temperature, suffix 6 | TJ | -40 | 105 | °C | Suffix 6 | 68 | |
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 250 | 400 | μs | VDD rising | 68 | |
| Power-on reset threshold | VPOR | 1.62 | 1.66 | 1.7 | V | 68 | |
| Power-down reset threshold | VPDR | 1.6 | 1.64 | 1.69 | V | 68 | |
| Brownout reset threshold 1, VDD rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 68 |
| Brownout reset threshold 1, VDD falling | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 68 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40°C < TJ < 130°C | 70 |
| Temperature coefficient | TCoeff_vrefint | 30 | 50 | ppm/°C | 70 | ||
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 70 | |
| Oscillator frequency (HSE) | fOSC_IN | 4 | 8 | 48 | MHz | 83 | |
| HSE user external clock source frequency, voltage scaling Range 1 | fHSE_ext | 8 | 48 | MHz | Voltage scaling Range 1 | 81 | |
| HSE user external clock source frequency, voltage scaling Range 2 | fHSE_ext | 8 | 26 | MHz | Voltage scaling Range 2 | 81 | |
| HSI16 Frequency | fHSI16 | 15.88 | 16.08 | MHz | VDD=3.0 V, TA=30 °C | 86 | |
| HSI16 oscillator frequency drift over temperature | ΔTemp(HSI16) | -1 | 1 | % | TA= 0 to 85 °C | 86 | |
| HSI16 oscillator frequency drift over temperature | ΔTemp(HSI16) | -2 | 1.5 | % | TA= -40 to 125 °C | 86 | |
| HSI48 Frequency | fHSI48 | 48 | MHz | VDD=3.0V, TA=30°C | 87 | ||
| Accuracy of the HSI48 oscillator over temperature (factory calibrated) | ACCHSI48_REL | -3 | 3 | % | VDD = 3.0 V to 3.6 V, TA = -15 to 85 °C | 87 | |
| LSI frequency | fLSI | 31.04 | 32.96 | kHz | VDD = 3.0 V, TA = 30 °C | 88 | |
| LSI frequency | fLSI | 29.5 | 34 | kHz | VDD = 1.62 V to 3.6 V, TA = -40 to 125 °C | 88 | |
| PLL input clock frequency | fPLL_IN | 2.66 | 16 | MHz | 88 | ||
| PLL VCO output, voltage scaling Range 1 | fVCO_OUT | 96 | 344 | MHz | Voltage scaling Range 1 | 88 | |
| PLL lock time | tLOCK | 15 | 40 | μs | 88 | ||
| Flash memory endurance | NEND | 10 | kcycles | TA = -40 to +105 °C | 89 | ||
| Supply current in Run mode (from flash memory), 64 MHz | IDD(Run) | 8.6 | 9 | mA | Range 1, PLL enabled, fHCLK = 64 MHz, code fetched from flash memory, 25 °C | 72 | |
| Supply current in Standby mode, RTC disabled, 3.6 V | IDD(Standby) | 0.3 | 1.8 | µA | RTC disabled, VDD = 3.6 V, 25 °C | 75 |
CAD (KiCad official)
- Symbol:
STM32G0B1CET6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32g0b1cet6-etched.step/stm32g0b1cet6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32g0b1cet6.step/stm32g0b1cet6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (165 pp, sha256
8433e47bc5da5cac, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32G0B1CET6
**STMicroelectronics** · Embedded Processors & Controllers · LQFP-48(7x7)
STM32G0B1CET6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC13 | bidirectional | FT I/O supplied through the power switch with a 3 mA limit; in output mode it is limited to 2 MHz at 30 pF and can only be used as a current sink. |
| 2 | PC14-OSC32_IN | bidirectional | FT I/O supplied through the power switch (3 mA limit), serving as the 32.768 kHz LSE oscillator input OSC32_IN with the same output limits as PC13. |
| 3 | PC15-OSC32_OUT | bidirectional | FT I/O supplied through the power switch (3 mA limit), serving as the 32.768 kHz LSE oscillator output OSC32_OUT with the same output limits as PC13. |
| 4 | VBAT | power_in | Backup supply from 1.55 V to 3.6 V for the RTC, TAMP, LSE oscillator and backup registers when VDD is not present. |
| 5 | VREF+ | power_in | Analog reference input, or output of the internal voltage reference buffer; must equal VDDA when VDDA < 2 V and lie between 2 V and VDDA when VDDA >= 2 V. |
| 6 | VDD/VDDA | power_in | Main supply from 1.7 V to 3.6 V for the internal regulator, I/Os and analog blocks. |
| 7 | VSS/VSSA | power_in | Ground reference for the digital and analog circuitry. |
| 8 | PF0-OSC_IN | bidirectional | FT I/O that serves as the external crystal oscillator input OSC_IN. |
| 9 | PF1-OSC_OUT | bidirectional | FT I/O that serves as the external crystal oscillator output OSC_OUT. |
| 10 | PF2-NRST | bidirectional | RST I/O with weak pull-up that acts as the active-low reset input when configured as reset, and as an FT GPIO otherwise. |
| 11 | PA0 | bidirectional | FT_a I/O with analog switch function, providing ADC_IN0 and wakeup input WKUP1. |
| 12 | PA1 | bidirectional | FT_ea I/O with switchable diode to VDDIOx, providing ADC_IN1 and COMP1_INP2. |
| 13 | PA2 | bidirectional | FT_a I/O with analog switch function, providing ADC_IN2, COMP2_INM and wakeup input WKUP4. |
| 14 | PA3 | bidirectional | FT_ea I/O with switchable diode to VDDIOx, providing ADC_IN3 and COMP2_INP2. |
| 15 | PA4 | bidirectional | TT_a I/O (3.6 V tolerant) with analog switch function, providing ADC_IN4 and DAC1_OUT1. |
| 16 | PA5 | bidirectional | TT_ea I/O (3.6 V tolerant) with switchable diode to VDDIOx, providing ADC_IN5 and DAC1_OUT2. |
| 17 | PA6 | bidirectional | FT_ea I/O (5 V tolerant) with switchable diode to VDDIOx, providing ADC_IN6 and COMP1_OUT. |
| 18 | PA7 | bidirectional | FT_a I/O (5 V tolerant) with analog switch function, providing ADC_IN7 and COMP2_OUT. |
| 19 | PB0 | bidirectional | FT_ea I/O (5 V tolerant) with switchable diode to VDDIOx, providing ADC_IN8 and COMP3_INP0. |
| 20 | PB1 | bidirectional | FT_ea I/O (5 V tolerant) with switchable diode to VDDIOx, providing ADC_IN9 and COMP1_INM6. |
| 21 | PB2 | bidirectional | FT_ea I/O (5 V tolerant) with switchable diode to VDDIOx, providing ADC_IN10, COMP1_INP1 and COMP3_INM6. |
| 22 | PB10 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with analog switch function, providing ADC_IN11. |
| 23 | PB11 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with analog switch function, providing ADC_IN15. |
| 24 | PB12 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with analog switch function, providing ADC_IN16. |
| 25 | PB13 | bidirectional | FT_fs I/O (5 V tolerant, Fm+ capable), listed as supplied from VDDIO2 only. |
| 26 | PB14 | bidirectional | FT_fs I/O (5 V tolerant, Fm+ capable), listed as supplied from VDDIO2 only. |
| 27 | PB15 | bidirectional | FT_fcs I/O supplied from VDDIO2 only, with USB Type-C PD capability on UCPD1_CC2 and RTC_REFIN. |
| 28 | PA8 | bidirectional | FT_fcs I/O supplied from VDDIO2 only, with USB Type-C PD capability on UCPD1_CC1 and MCO output. |
| 29 | PA9 | bidirectional | FT_fds I/O supplied from VDDIO2 only, with USB Type-C dead-battery capability on UCPD1_DBCC1; can be remapped in place of PA11. |
| 30 | PC6 | bidirectional | FT_s I/O supplied from VDDIO2 only, with UCPD1_FRSTX and TIM3_CH1 alternate functions. |
| 31 | PC7 | bidirectional | FT_s I/O supplied from VDDIO2 only, with UCPD2_FRSTX and TIM3_CH2 alternate functions. |
| 32 | PA10 | bidirectional | FT_fds I/O supplied from VDDIO2 only, with USB Type-C dead-battery capability on UCPD1_DBCC2; can be remapped in place of PA12. |
| 33 | PA11 [PA9] | bidirectional | FT_fus I/O with USB full-speed D- function (USB_DM) in default mapping; can be remapped to PA9. |
| 34 | PA12 [PA10] | bidirectional | FT_fus I/O with USB full-speed D+ function (USB_DP) in default mapping; can be remapped to PA10. |
| 35 | PA13 | bidirectional | FT_es I/O that is configured as SWDIO debug function at reset, with internal pull-up activated. |
| 36 | PA14-BOOT0 | bidirectional | FT_s I/O configured as SWCLK debug function at reset with internal pull-down activated, and used as the BOOT0 boot-mode pin. |
| 37 | PA15 | bidirectional | FT_s I/O supplied from VDDIO2 only, with SPI1_NSS, USART2_RX and USB_NOE alternate functions. |
| 38 | PD0 | bidirectional | FT_cs I/O supplied from VDDIO2 only, with USB Type-C PD capability on UCPD2_CC1 and FDCAN1_RX alternate function. |
| 39 | PD1 | bidirectional | FT_ds I/O supplied from VDDIO2 only, with USB Type-C dead-battery capability on UCPD2_DBCC1 and FDCAN1_TX alternate function. |
| 40 | PD2 | bidirectional | FT_cs I/O supplied from VDDIO2 only, with USB Type-C PD capability on UCPD2_CC2 and USART5_RX alternate function. |
| 41 | PD3 | bidirectional | FT_ds I/O supplied from VDDIO2 only, with USB Type-C dead-battery capability on UCPD2_DBCC2 and USART5_TX alternate function. |
| 42 | PB3 | bidirectional | FT_a I/O with analog switch function, providing SPI1_SCK, I2C3_SCL and COMP2_INM6 functions. |
| 43 | PB4 | bidirectional | FT_a I/O with analog switch function, providing SPI1_MISO, I2C3_SDA and COMP2_INP0 functions. |
| 44 | PB5 | bidirectional | FT I/O with wakeup input WKUP6 and COMP2_OUT, SPI1_MOSI and FDCAN2_RX alternate functions. |
| 45 | PB6 | bidirectional | FT_fa I/O (Fm+ capable) with analog switch function, providing I2C1_SCL, USART1_TX and COMP2_INP1. |
| 46 | PB7 | bidirectional | FT_fa I/O (Fm+ capable) with analog switch function, providing I2C1_SDA, USART1_RX and COMP2_INM7/PVD_IN inputs. |
| 47 | PB8 | bidirectional | FT_f I/O (Fm+ capable) with CEC, I2C1_SCL and USART3_TX alternate functions. |
| 48 | PB9 | bidirectional | FT_f I/O (Fm+ capable) with IR_OUT, I2C1_SDA and USART3_RX alternate functions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External supply voltage | VDD | -0.3 | | 4 | V | | 66 |
| External supply voltage for selected I/Os | VDDIO2 | -0.3 | | 4 | V | | 66 |
| External supply voltage on VBAT pin | VBAT | -0.3 | | 4 | V | | 66 |
| Input voltage on FT_c pins | VIN | -0.3 | | 5.5 | V | Input voltage on FT_c pins | 66 |
| Input voltage on any other pin | VIN | -0.3 | | 4 | V | Input voltage on any other pin | 66 |
| Current into VDD/VDDA and VDDIO2 power pins (source) | IVDD/VDDA,VDDIO2 | | | 100 | mA | | 66 |
| Current out of VSS/VSSA and VSS ground pins (sink) | IVSS/VSSA,VSS | | | 100 | mA | | 66 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 67 |
| Maximum junction temperature | TJ | | | 150 | °C | | 67 |
| Internal AHB clock frequency | fHCLK | 0 | | 64 | MHz | | 67 |
| Internal APB clock frequency | fPCLK | 0 | | 64 | MHz | | 67 |
| Standard operating voltage | VDD | 1.7 | | 3.6 | V | Standard operating voltage | 67 |
| External supply voltage for selected I/Os | VDDIO2 | 1.65 | | 3.6 | V | External supply voltage for selected I/Os | 67 |
| Analog supply voltage for ADC and COMP operation | VDDA | 1.62 | | 3.6 | V | For ADC and COMP operation | 67 |
| Analog supply voltage for DAC operation | VDDA | 1.8 | | 3.6 | V | For DAC operation | 67 |
| Analog supply voltage for VREFBUF operation | VDDA | 2.4 | | 3.6 | V | For VREFBUF operation | 67 |
| Backup operating voltage | VBAT | 1.55 | | 3.6 | V | | 67 |
| Ambient temperature, suffix 6 | TA | -40 | | 85 | °C | Suffix 6 | 68 |
| Junction temperature, suffix 6 | TJ | -40 | | 105 | °C | Suffix 6 | 68 |
| POR temporization when VDD crosses VPOR | tRSTTEMPO | | 250 | 400 | μs | VDD rising | 68 |
| Power-on reset threshold | VPOR | 1.62 | 1.66 | 1.7 | V | | 68 |
| Power-down reset threshold | VPDR | 1.6 | 1.64 | 1.69 | V | | 68 |
| Brownout reset threshold 1, VDD rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 68 |
| Brownout reset threshold 1, VDD falling | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 68 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40°C < TJ < 130°C | 70 |
| Temperature coefficient | TCoeff_vrefint | | 30 | 50 | ppm/°C | | 70 |
| Voltage coefficient | VDDCoeff | | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 70 |
| Oscillator frequency (HSE) | fOSC_IN | 4 | 8 | 48 | MHz | | 83 |
| HSE user external clock source frequency, voltage scaling Range 1 | fHSE_ext | 8 | | 48 | MHz | Voltage scaling Range 1 | 81 |
| HSE user external clock source frequency, voltage scaling Range 2 | fHSE_ext | 8 | | 26 | MHz | Voltage scaling Range 2 | 81 |
| HSI16 Frequency | fHSI16 | 15.88 | | 16.08 | MHz | VDD=3.0 V, TA=30 °C | 86 |
| HSI16 oscillator frequency drift over temperature | ΔTemp(HSI16) | -1 | | 1 | % | TA= 0 to 85 °C | 86 |
| HSI16 oscillator frequency drift over temperature | ΔTemp(HSI16) | -2 | | 1.5 | % | TA= -40 to 125 °C | 86 |
| HSI48 Frequency | fHSI48 | | 48 | | MHz | VDD=3.0V, TA=30°C | 87 |
| Accuracy of the HSI48 oscillator over temperature (factory calibrated) | ACCHSI48_REL | -3 | | 3 | % | VDD = 3.0 V to 3.6 V, TA = -15 to 85 °C | 87 |
| LSI frequency | fLSI | 31.04 | | 32.96 | kHz | VDD = 3.0 V, TA = 30 °C | 88 |
| LSI frequency | fLSI | 29.5 | | 34 | kHz | VDD = 1.62 V to 3.6 V, TA = -40 to 125 °C | 88 |
| PLL input clock frequency | fPLL_IN | 2.66 | | 16 | MHz | | 88 |
| PLL VCO output, voltage scaling Range 1 | fVCO_OUT | 96 | | 344 | MHz | Voltage scaling Range 1 | 88 |
| PLL lock time | tLOCK | | 15 | 40 | μs | | 88 |
| Flash memory endurance | NEND | 10 | | | kcycles | TA = -40 to +105 °C | 89 |
| Supply current in Run mode (from flash memory), 64 MHz | IDD(Run) | | 8.6 | 9 | mA | Range 1, PLL enabled, fHCLK = 64 MHz, code fetched from flash memory, 25 °C | 72 |
| Supply current in Standby mode, RTC disabled, 3.6 V | IDD(Standby) | | 0.3 | 1.8 | µA | RTC disabled, VDD = 3.6 V, 25 °C | 75 |
## CAD (KiCad official)
- Symbol: `STM32G0B1CET6`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `stm32g0b1cet6-etched.step` / `stm32g0b1cet6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g0b1cet6.step` / `stm32g0b1cet6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32g0b1ce.pdf) (165 pp, sha256 `8433e47bc5da5cac`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32g0b1cet6-datasheet.pdf)