component
STM32G0B1CBT6N
Public Made by Adomby adom
STMicroelectronics Integrated Circuits (ICs), 48-LQFP. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
12 files changed
+23865
diff truncated
README.mdadded+149@@ -0,0 +1,149 @@+# STM32G0B1CBT6N++**STMicroelectronics** · Integrated Circuits (ICs) · 48-LQFP++STM32G0B1CBT6N from STMicroelectronics, in a 48-LQFP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PC13 | bidirectional | PC13 is a 5 V tolerant GPIO supplied through the power switch with a 3 mA limit, so it must not exceed 2 MHz at 30 pF in output mode and can only sink current; it also provides TIM1_BKIN, RTC_TS, RTC_OUT1 and WKUP2. |+| 2 | PC14-OSC32_IN | bidirectional | PC14 is a 5 V tolerant GPIO supplied through the power switch with a 3 mA limit that can only sink current in output mode, and it doubles as the 32.768 kHz oscillator input OSC32_IN. |+| 3 | PC15-OSC32_OUT | bidirectional | PC15 is a 5 V tolerant GPIO supplied through the power switch with a 3 mA limit that can only sink current in output mode, and it doubles as the 32.768 kHz oscillator output OSC32_OUT. |+| 4 | VBAT | power_in | VBAT supplies the RTC, TAMP, the low-speed 32.768 kHz oscillator and backup registers from 1.55 V to 3.6 V when VDD is not present. |+| 5 | VREF+ | power_in | VREF+ is the analog reference input or internal buffer output and must equal VDDA when VDDA is below 2 V, or lie between 2 V and VDDA when VDDA is 2 V or above. |+| 6 | VDD/VDDA | power_in | VDD/VDDA is the main 1.7 V to 3.6 V supply for the internal regulator, the I/O ring and the analog blocks. |+| 7 | VSS/VSSA | power_in | VSS/VSSA is the ground reference for the digital and analog supplies. |+| 8 | PF0-OSC_IN | bidirectional | PF0 is a 5 V tolerant FT I/O that doubles as the high-speed crystal oscillator input OSC_IN. |+| 9 | PF1-OSC_OUT | bidirectional | PF1 is a 5 V tolerant FT I/O that doubles as the high-speed crystal oscillator output OSC_OUT. |+| 10 | PF2-NRST | bidirectional | PF2 is an RST-type I/O with embedded weak pull-up that acts as the NRST reset input when configured as reset, and as a 5 V tolerant FT GPIO otherwise. |+| 11 | PA0 | bidirectional | PA0 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as ADC input ADC_IN0, TAMP_IN2 and WKUP1. |+| 12 | PA1 | bidirectional | PA1 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC input ADC_IN1. |+| 13 | PA2 | bidirectional | PA2 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as ADC_IN2 and WKUP4. |+| 14 | PA3 | bidirectional | PA3 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN3. |+| 15 | PA4 | bidirectional | PA4 is a 3.6 V tolerant TT_a I/O with an analog switch function that also serves as ADC_IN4 and DAC1_OUT1. |+| 16 | PA5 | bidirectional | PA5 is a 3.6 V tolerant TT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN5 and DAC1_OUT2. |+| 17 | PA6 | bidirectional | PA6 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN6. |+| 18 | PA7 | bidirectional | PA7 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as ADC_IN7. |+| 19 | PB0 | bidirectional | PB0 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN8 and COMP3_INP0. |+| 20 | PB1 | bidirectional | PB1 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN9 and COMP1_INM6. |+| 21 | PB2 | bidirectional | PB2 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN10. |+| 22 | PB10 | bidirectional | PB10 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as ADC_IN11. |+| 23 | PB11 | bidirectional | PB11 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as ADC_IN15. |+| 24 | PB12 | bidirectional | PB12 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as ADC_IN16. |+| 25 | PB13 | bidirectional | PB13 is a 5 V tolerant FT_fs I/O with Fm+ capability that is supplied from VDDIO2 only. |+| 26 | PB14 | bidirectional | PB14 is a 5 V tolerant FT_fs I/O with Fm+ capability that is supplied from VDDIO2 only. |+| 27 | PB15 | bidirectional | PB15 is a 5 V tolerant FT_fcs I/O with Fm+ and USB Type-C PD capability that is supplied from VDDIO2 only, and may have a pull-down present at reset depending on PD1. |+| 28 | PA8 | bidirectional | PA8 is a 5 V tolerant FT_fcs I/O with Fm+ and USB Type-C PD capability that is supplied from VDDIO2 only, and may have a pull-down present at reset depending on PA9. |+| 29 | PA9 | bidirectional | PA9 is a 5 V tolerant FT_fds I/O with Fm+ and USB Type-C dead-battery capability that is supplied from VDDIO2 only and can be remapped in place of PA11. |+| 30 | VSS | power_in | VSS is a ground pin of the device. |+| 31 | VDDIO2 | power_in | VDDIO2 is the separate I/O supply from 1.65 V to 3.6 V for selected I/Os and VDDUSB and must not be applied without valid VDD. |+| 32 | PA10 | bidirectional | PA10 is a 5 V tolerant FT_fds I/O with Fm+ and USB Type-C dead-battery capability that is supplied from VDDIO2 only and can be remapped in place of PA12. |+| 33 | PA11 [PA9] | bidirectional | PA11 is a 5 V tolerant FT_fus I/O with Fm+ and USB function that is supplied from VDDIO2 and carries the USB_DM signal. |+| 34 | PA12 [PA10] | bidirectional | PA12 is a 5 V tolerant FT_fus I/O with Fm+ and USB function that is supplied from VDDIO2 and carries the USB_DP signal. |+| 35 | PA13 | bidirectional | PA13 is a 5 V tolerant FT_es I/O with a switchable diode to VDDIOx that is configured as SWDIO with an internal pull-up after reset. |+| 36 | PA14-BOOT0 | bidirectional | PA14 is a 5 V tolerant FT_s I/O supplied from VDDIO2 only that is configured as SWCLK with an internal pull-down after reset and is shared with the BOOT0 pin. |+| 37 | PA15 | bidirectional | PA15 is a 5 V tolerant FT_s I/O supplied from VDDIO2 only with alternate functions including SPI1_NSS, USART2_RX and USB_NOE. |+| 38 | PD0 | bidirectional | PD0 is a 5 V tolerant FT_cs I/O with USB Type-C PD capability that is supplied from VDDIO2 only and may have a pull-down present at reset. |+| 39 | PD1 | bidirectional | PD1 is a 5 V tolerant FT_ds I/O with USB Type-C dead-battery capability that is supplied from VDDIO2 only and may have a pull-down present at reset. |+| 40 | PD2 | bidirectional | PD2 is a 5 V tolerant FT_cs I/O with USB Type-C PD capability that is supplied from VDDIO2 only and may have a pull-down present at reset. |+| 41 | PD3 | bidirectional | PD3 is a 5 V tolerant FT_ds I/O with USB Type-C dead-battery capability that is supplied from VDDIO2 only and may have a pull-down present at reset. |+| 42 | PB3 | bidirectional | PB3 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as COMP2_INM6. |+| 43 | PB4 | bidirectional | PB4 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as COMP2_INP0. |+| 44 | PB5 | bidirectional | PB5 is a 5 V tolerant FT I/O that also serves as WKUP6. |+| 45 | PB6 | bidirectional | PB6 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as COMP2_INP1. |+| 46 | PB7 | bidirectional | PB7 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as COMP2_INM7 and PVD_IN. |+| 47 | PB8 | bidirectional | PB8 is a 5 V tolerant FT_f I/O with Fm+ capability. |+| 48 | PB9 | bidirectional | PB9 is a 5 V tolerant FT_f I/O with Fm+ capability that also serves as IR_OUT and TIM17_CH1. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | 48-LQFP |+| Category | Integrated Circuits (ICs) |+| Pins | 48 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| External supply voltage | VDD | -0.3 | | 4 | V | | 66 |+| External supply voltage for selected I/Os | VDDIO2 | -0.3 | | 4 | V | | 66 |+| External supply voltage on VBAT pin | VBAT | -0.3 | | 4 | V | | 66 |+| Input voltage on any other pin | VIN | -0.3 | | 4 | V | Input voltage on any other pin | 66 |+| Current into VDD/VDDA and VDDIO2 power pins (source) | IVDD/VDDA,VDDIO2 | | | 100 | mA | | 66 |+| Current out of VSS/VSSA and VSS ground pins (sink) | IVSS/VSSA,VSS | | | 100 | mA | | 66 |+| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | | | 15 | mA | | 67 |+| Output current sunk by any FT_f pin | IIO(PIN) | | | 20 | mA | | 67 |+| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | | | 80 | mA | | 67 |+| Storage temperature range | TSTG | -65 | | 150 | °C | | 67 |+| Maximum junction temperature | TJ | | | 150 | °C | | 67 |+| Internal AHB clock frequency | fHCLK | 0 | | 64 | MHz | | 67 |+| Internal APB clock frequency | fPCLK | 0 | | 64 | MHz | | 67 |+| Standard operating voltage | VDD | 1.7 | | 3.6 | V | | 67 |+| External supply voltage for selected I/Os | VDDIO2 | 1.65 | | 3.6 | V | | 67 |+| Analog supply voltage | VDDA | 1.62 | | 3.6 | V | For ADC and COMP operation | 67 |+| Analog supply voltage | VDDA | 1.8 | | 3.6 | V | For DAC operation | 67 |+| Analog supply voltage | VDDA | 2.4 | | 3.6 | V | For VREFBUF operation | 67 |+| Backup operating voltage | VBAT | 1.55 | | 3.6 | V | | 67 |+| Ambient temperature | TA | -40 | | 85 | °C | Suffix 6 | 68 |+| Junction temperature | TJ | -40 | | 105 | °C | Suffix 6 | 68 |+| POR temporization when VDD crosses VPOR | tRSTTEMPO | | 250 | 400 | µs | VDD rising | 68 |+| Power-on reset threshold | VPOR | 1.62 | 1.66 | 1.7 | V | | 68 |+| Power-down reset threshold | VPDR | 1.6 | 1.64 | 1.69 | V | | 68 |+| Brownout reset threshold 1 | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 68 |+| Brownout reset threshold 1 | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 68 |+| Brownout reset threshold 2 | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 69 |+| Brownout reset threshold 2 | VBOR2 | 2.1 | 2.21 | 2.28 | V | VDD falling | 69 |+| Brownout reset threshold 3 | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 69 |+| Brownout reset threshold 3 | VBOR3 | 2.4 | 2.52 | 2.58 | V | VDD falling | 69 |+| Brownout reset threshold 4 | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 69 |+| Brownout reset threshold 4 | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 69 |+| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40°C < TJ < 130°C | 70 |+| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % | % VREFINT | 70 |+| 1/2 reference voltage | VREFINT_DIV2 | 49 | 50 | 51 | % | % VREFINT | 70 |+| 3/4 reference voltage | VREFINT_DIV3 | 74 | 75 | 76 | % | % VREFINT | 70 |+| Supply current in Run mode (from flash memory) | IDD(Run) | | 8.6 | 9 | mA | Range 1; PLL enabled; fHCLK 64 MHz; flash memory; typ 25 °C, max 25 °C | 72 |+| Supply current in Low-power run mode (from flash memory) | IDD(LPRun) | | 280 | 415 | µA | PLL disabled; fHCLK 2 MHz; flash memory; typ 25 °C, max 25 °C | 72 |+| Supply current in Sleep mode | IDD(Sleep) | | 1.9 | 2.5 | mA | Range 1; fHCLK 64 MHz; all peripherals disabled; typ 25 °C, max 25 °C | 74 |+| Supply current in Low-power sleep mode | IDD(LPSleep) | | 70 | 175 | µA | Flash memory disabled; PLL disabled; fHCLK 2 MHz; typ 25 °C, max 25 °C | 74 |+| Supply current in Stop 0 mode | IDD(Stop 0) | | 295 | 375 | µA | HSI kernel enabled; VDD 3 V; typ 25 °C, max 25 °C | 74 |+| Supply current in Standby mode | IDD(Standby) | | 0.2 | 1.4 | µA | RTC disabled; VDD 3.0 V; typ 25 °C, max 25 °C | 75 |+| Supply current in Shutdown mode | IDD(Shutdown) | | 38 | 370 | nA | RTC disabled; VDD 3.0 V; typ 25 °C, max 25 °C | 76 |+| Wakeup time from Sleep to Run mode | tWUSLEEP | | 11 | 11 | CPU cycles | | 80 |+| Wakeup time from Stop 0 (flash not powered) | tWUSTOP0 | | 5.6 | 6 | µs | Transiting to Run-mode execution in flash memory not powered in Stop 0 mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 or Range 2 | 80 |+| Wakeup time from Standby mode | tWUSTBY | | 14.5 | 30 | µs | Transiting to Run mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 | 80 |+| Wakeup time from Shutdown mode | tWUSHDN | | 258 | 340 | µs | Transiting to Run mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 | 81 |+| User external clock source frequency (HSE) | fHSE_ext | 8 | | 48 | MHz | Voltage scaling Range 1 | 81 |+| User external clock source frequency (HSE) | fHSE_ext | 8 | | 26 | MHz | Voltage scaling Range 2 | 81 |+| HSE oscillator frequency | fOSC_IN | 4 | 8 | 48 | MHz | | 83 |+| HSI16 frequency | fHSI16 | 15.88 | | 16.08 | MHz | VDD=3.0 V, TA=30 °C | 86 |+| LSI frequency | fLSI | 31.04 | | 32.96 | kHz | VDD = 3.0 V, TA = 30 °C | 88 |+| LSI frequency | fLSI | 29.5 | | 34 | kHz | VDD = 1.62 V to 3.6 V, TA = -40 to 125 °C | 88 |+| PLL input clock frequency | fPLL_IN | 2.66 | | 16 | MHz | | 88 |+| PLL input clock duty cycle | DPLL_IN | 45 | | 55 | % | | 88 |+| PLL VCO output | fVCO_OUT | 96 | | 344 | MHz | Voltage scaling Range 1 | 88 |+| PLL VCO output | fVCO_OUT | 96 | | 128 | MHz | Voltage scaling Range 2 | 88 |+| Endurance | NEND | 10 | | | kcycles | TA = -40 to +105 °C | 89 |++## CAD (Adom-generated)++- Symbol: `STM32G0B1CBT6N`+- Footprint: `Adom_Gen:STMicroelectronics_STM32_ccff95`+- 3D model: generated to fit the land (STEP)+- 3D model files: `stm32g0b1cbt6n-etched.step` / `stm32g0b1cbt6n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g0b1cbt6n.step` / `stm32g0b1cbt6n.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32g0b1ce.pdf) (165 pp, sha256 `8433e47bc5da5cac`, retrieved 2026-11-13, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.++[Datasheet PDF](docs/stm32g0b1cbt6n-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/stm32g0b1cbt6n-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+432@@ -0,0 +1,432 @@+{+ "slug": "stm32g0b1cbt6n",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Integrated Circuits (ICs), 48-LQFP. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "integrated circuits (ics)",+ "stm32g0b1cbt6n",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32g0b1cbt6n.kicad_sym",+ "stm32g0b1cbt6n.kicad_mod",+ "stm32g0b1cbt6n.glb",+ "stm32g0b1cbt6n.step",+ "stm32g0b1cbt6n.lbr",+ "docs/hero.png",+ "docs/stm32g0b1cbt6n-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32g0b1cbt6n-hero.glb",+ "stm32g0b1cbt6n-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32G0B1CBT6N",+ "manufacturer": "STMicroelectronics",+ "package": "48-LQFP",+ "pin_count": 48,+ "category": "Integrated Circuits (ICs)",+ "subcategory": "Integrated Circuits (ICs)",+ "datasheet": "https://www.st.com/resource/en/datasheet/stm32g0b1ce.pdf",+ "parts": {+ "symbol": "stm32g0b1cbt6n.kicad_sym",+ "footprint": "stm32g0b1cbt6n.kicad_mod",+ "model_3d": "stm32g0b1cbt6n-hero.glb",+ "model_3d_plain": "stm32g0b1cbt6n.glb",+ "model_3d_step": "stm32g0b1cbt6n-etched.step",+ "model_3d_step_plain": "stm32g0b1cbt6n.step",+ "lbr": "stm32g0b1cbt6n.lbr"+ },+ "distributor_links": {+ "digikey": "497-STM32G0B1CBT6N-ND",+ "mouser": "511-STM32G0B1CBT6N"+ },+ "distributor_check": {+ "checked_at": "2026-11-13T17:25:52Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-STM32G0B1CBT6N-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32G0B1CBT6N",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PC13",+ "type": "bidirectional",+ "description": "PC13 is a 5 V tolerant GPIO supplied through the power switch with a 3 mA limit, so it must not exceed 2 MHz at 30 pF in output mode and can only sink current; it also provides TIM1_BKIN, RTC_TS, RTC_OUT1 and WKUP2."+ },+ {+ "number": "2",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "PC14 is a 5 V tolerant GPIO supplied through the power switch with a 3 mA limit that can only sink current in output mode, and it doubles as the 32.768 kHz oscillator input OSC32_IN."+ },+ {+ "number": "3",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "PC15 is a 5 V tolerant GPIO supplied through the power switch with a 3 mA limit that can only sink current in output mode, and it doubles as the 32.768 kHz oscillator output OSC32_OUT."+ },+ {+ "number": "4",+ "name": "VBAT",+ "type": "power_in",+ "description": "VBAT supplies the RTC, TAMP, the low-speed 32.768 kHz oscillator and backup registers from 1.55 V to 3.6 V when VDD is not present."+ },+ {+ "number": "5",+ "name": "VREF+",+ "type": "power_in",+ "description": "VREF+ is the analog reference input or internal buffer output and must equal VDDA when VDDA is below 2 V, or lie between 2 V and VDDA when VDDA is 2 V or above."+ },+ {+ "number": "6",+ "name": "VDD/VDDA",+ "type": "power_in",+ "description": "VDD/VDDA is the main 1.7 V to 3.6 V supply for the internal regulator, the I/O ring and the analog blocks."+ },+ {+ "number": "7",+ "name": "VSS/VSSA",+ "type": "power_in",+ "description": "VSS/VSSA is the ground reference for the digital and analog supplies."+ },+ {+ "number": "8",+ "name": "PF0-OSC_IN",+ "type": "bidirectional",+ "description": "PF0 is a 5 V tolerant FT I/O that doubles as the high-speed crystal oscillator input OSC_IN."+ },+ {+ "number": "9",+ "name": "PF1-OSC_OUT",+ "type": "bidirectional",+ "description": "PF1 is a 5 V tolerant FT I/O that doubles as the high-speed crystal oscillator output OSC_OUT."+ },+ {+ "number": "10",+ "name": "PF2-NRST",+ "type": "bidirectional",+ "description": "PF2 is an RST-type I/O with embedded weak pull-up that acts as the NRST reset input when configured as reset, and as a 5 V tolerant FT GPIO otherwise."+ },+ {+ "number": "11",+ "name": "PA0",+ "type": "bidirectional",+ "description": "PA0 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as ADC input ADC_IN0, TAMP_IN2 and WKUP1."+ },+ {+ "number": "12",+ "name": "PA1",+ "type": "bidirectional",+ "description": "PA1 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC input ADC_IN1."+ },+ {+ "number": "13",+ "name": "PA2",+ "type": "bidirectional",+ "description": "PA2 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as ADC_IN2 and WKUP4."+ },+ {+ "number": "14",+ "name": "PA3",+ "type": "bidirectional",+ "description": "PA3 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN3."+ },+ {+ "number": "15",+ "name": "PA4",+ "type": "bidirectional",+ "description": "PA4 is a 3.6 V tolerant TT_a I/O with an analog switch function that also serves as ADC_IN4 and DAC1_OUT1."+ },+ {+ "number": "16",+ "name": "PA5",+ "type": "bidirectional",+ "description": "PA5 is a 3.6 V tolerant TT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN5 and DAC1_OUT2."+ },+ {+ "number": "17",+ "name": "PA6",+ "type": "bidirectional",+ "description": "PA6 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN6."+ },+ {+ "number": "18",+ "name": "PA7",+ "type": "bidirectional",+ "description": "PA7 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as ADC_IN7."+ },+ {+ "number": "19",+ "name": "PB0",+ "type": "bidirectional",+ "description": "PB0 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN8 and COMP3_INP0."+ },+ {+ "number": "20",+ "name": "PB1",+ "type": "bidirectional",+ "description": "PB1 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN9 and COMP1_INM6."+ },+ {+ "number": "21",+ "name": "PB2",+ "type": "bidirectional",+ "description": "PB2 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN10."+ },+ {+ "number": "22",+ "name": "PB10",+ "type": "bidirectional",+ "description": "PB10 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as ADC_IN11."+ },+ {+ "number": "23",+ "name": "PB11",+ "type": "bidirectional",+ "description": "PB11 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as ADC_IN15."+ },+ {+ "number": "24",+ "name": "PB12",+ "type": "bidirectional",+ "description": "PB12 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as ADC_IN16."+ },+ {+ "number": "25",+ "name": "PB13",+ "type": "bidirectional",+ "description": "PB13 is a 5 V tolerant FT_fs I/O with Fm+ capability that is supplied from VDDIO2 only."+ },+ {+ "number": "26",+ "name": "PB14",+ "type": "bidirectional",+ "description": "PB14 is a 5 V tolerant FT_fs I/O with Fm+ capability that is supplied from VDDIO2 only."+ },+ {+ "number": "27",+ "name": "PB15",+ "type": "bidirectional",+ "description": "PB15 is a 5 V tolerant FT_fcs I/O with Fm+ and USB Type-C PD capability that is supplied from VDDIO2 only, and may have a pull-down present at reset depending on PD1."+ },+ {+ "number": "28",+ "name": "PA8",+ "type": "bidirectional",+ "description": "PA8 is a 5 V tolerant FT_fcs I/O with Fm+ and USB Type-C PD capability that is supplied from VDDIO2 only, and may have a pull-down present at reset depending on PA9."+ },+ {+ "number": "29",+ "name": "PA9",+ "type": "bidirectional",+ "description": "PA9 is a 5 V tolerant FT_fds I/O with Fm+ and USB Type-C dead-battery capability that is supplied from VDDIO2 only and can be remapped in place of PA11."+ },+ {+ "number": "30",+ "name": "VSS",+ "type": "power_in",+ "description": "VSS is a ground pin of the device."+ },+ {+ "number": "31",+ "name": "VDDIO2",+ "type": "power_in",+ "description": "VDDIO2 is the separate I/O supply from 1.65 V to 3.6 V for selected I/Os and VDDUSB and must not be applied without valid VDD."+ },+ {+ "number": "32",+ "name": "PA10",+ "type": "bidirectional",+ "description": "PA10 is a 5 V tolerant FT_fds I/O with Fm+ and USB Type-C dead-battery capability that is supplied from VDDIO2 only and can be remapped in place of PA12."+ },+ {+ "number": "33",+ "name": "PA11 [PA9]",+ "type": "bidirectional",+ "description": "PA11 is a 5 V tolerant FT_fus I/O with Fm+ and USB function that is supplied from VDDIO2 and carries the USB_DM signal."+ },+ {+ "number": "34",+ "name": "PA12 [PA10]",+ "type": "bidirectional",+ "description": "PA12 is a 5 V tolerant FT_fus I/O with Fm+ and USB function that is supplied from VDDIO2 and carries the USB_DP signal."+ },+ {+ "number": "35",+ "name": "PA13",+ "type": "bidirectional",+ "description": "PA13 is a 5 V tolerant FT_es I/O with a switchable diode to VDDIOx that is configured as SWDIO with an internal pull-up after reset."+ },+ {+ "number": "36",+ "name": "PA14-BOOT0",+ "type": "bidirectional",+ "description": "PA14 is a 5 V tolerant FT_s I/O supplied from VDDIO2 only that is configured as SWCLK with an internal pull-down after reset and is shared with the BOOT0 pin."+ },+ {+ "number": "37",+ "name": "PA15",+ "type": "bidirectional",+ "description": "PA15 is a 5 V tolerant FT_s I/O supplied from VDDIO2 only with alternate functions including SPI1_NSS, USART2_RX and USB_NOE."+ },+ {+ "number": "38",+ "name": "PD0",+ "type": "bidirectional",+ "description": "PD0 is a 5 V tolerant FT_cs I/O with USB Type-C PD capability that is supplied from VDDIO2 only and may have a pull-down present at reset."+ },+ {+ "number": "39",+ "name": "PD1",+ "type": "bidirectional",+ "description": "PD1 is a 5 V tolerant FT_ds I/O with USB Type-C dead-battery capability that is supplied from VDDIO2 only and may have a pull-down present at reset."+ },+ {+ "number": "40",+ "name": "PD2",+ "type": "bidirectional",+ "description": "PD2 is a 5 V tolerant FT_cs I/O with USB Type-C PD capability that is supplied from VDDIO2 only and may have a pull-down present at reset."+ },+ {+ "number": "41",+ "name": "PD3",+ "type": "bidirectional",+ "description": "PD3 is a 5 V tolerant FT_ds I/O with USB Type-C dead-battery capability that is supplied from VDDIO2 only and may have a pull-down present at reset."+ },+ {+ "number": "42",+ "name": "PB3",+ "type": "bidirectional",+ "description": "PB3 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as COMP2_INM6."+ },+ {+ "number": "43",+ "name": "PB4",+ "type": "bidirectional",+ "description": "PB4 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as COMP2_INP0."+ },+ {+ "number": "44",+ "name": "PB5",+ "type": "bidirectional",+ "description": "PB5 is a 5 V tolerant FT I/O that also serves as WKUP6."+ },+ {+ "number": "45",+ "name": "PB6",+ "type": "bidirectional",+ "description": "PB6 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as COMP2_INP1."+ },+ {+ "number": "46",+ "name": "PB7",+ "type": "bidirectional",+ "description": "PB7 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as COMP2_INM7 and PVD_IN."+ },+ {+ "number": "47",+ "name": "PB8",+ "type": "bidirectional",+ "description": "PB8 is a 5 V tolerant FT_f I/O with Fm+ capability."+ },+ {+ "number": "48",+ "name": "PB9",+ "type": "bidirectional",+ "description": "PB9 is a 5 V tolerant FT_f I/O with Fm+ capability that also serves as IR_OUT and TIM17_CH1."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: MPN STM32G0B1CBT6N decodes to LQFP48 (C), 128 Kbyte flash (B), temperature suffix 6, and N version. "+ ],+ "pages_sent": 90,+ "cost_usd": 0.2798,+ "at": "2026-11-13T17:28:29"+ },+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/stm32g0b1ce.pdf",+ "pages": 165,+ "sha256": "8433e47bc5da5cac",+ "source_tier": "mfr"+ },+ "cad": "Adom_Gen derived land; symbol and 3D generated",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32g0b1cbt6n.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.86,+ 8.86,+ 1.6+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d55dbb5ee58b4857c9b8f989497c104885bf7b5754e7a64d0116c6229472e67e",+ "checked": "2026-11-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32g0b1cbt6n-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.86,+ 8.86,+ 1.6+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c2b6af85f0617158a9820d99379e8bd474418fc1e588aa02279ab371d559b768",+ "checked": "2026-11-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+437@@ -0,0 +1,437 @@+{+ "slug": "stm32g0b1cbt6n",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Integrated Circuits (ICs), 48-LQFP. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "integrated circuits (ics)",+ "stm32g0b1cbt6n",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32g0b1cbt6n.kicad_sym",+ "stm32g0b1cbt6n.kicad_mod",+ "stm32g0b1cbt6n.glb",+ "stm32g0b1cbt6n.step",+ "stm32g0b1cbt6n.lbr",+ "docs/hero.png",+ "docs/stm32g0b1cbt6n-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32g0b1cbt6n-hero.glb",+ "stm32g0b1cbt6n-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32G0B1CBT6N",+ "manufacturer": "STMicroelectronics",+ "package": "48-LQFP",+ "pin_count": 48,+ "category": "Integrated Circuits (ICs)",+ "subcategory": "Integrated Circuits (ICs)",+ "datasheet": "https://www.st.com/resource/en/datasheet/stm32g0b1ce.pdf",+ "parts": {+ "symbol": "stm32g0b1cbt6n.kicad_sym",+ "footprint": "stm32g0b1cbt6n.kicad_mod",+ "model_3d": "stm32g0b1cbt6n-hero.glb",+ "model_3d_plain": "stm32g0b1cbt6n.glb",+ "model_3d_step": "stm32g0b1cbt6n-etched.step",+ "model_3d_step_plain": "stm32g0b1cbt6n.step",+ "lbr": "stm32g0b1cbt6n.lbr"+ },+ "distributor_links": {+ "digikey": "497-STM32G0B1CBT6N-ND",+ "mouser": "511-STM32G0B1CBT6N"+ },+ "distributor_check": {+ "checked_at": "2026-11-13T17:25:52Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-STM32G0B1CBT6N-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32G0B1CBT6N",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PC13",+ "type": "bidirectional",+ "description": "PC13 is a 5 V tolerant GPIO supplied through the power switch with a 3 mA limit, so it must not exceed 2 MHz at 30 pF in output mode and can only sink current; it also provides TIM1_BKIN, RTC_TS, RTC_OUT1 and WKUP2."+ },+ {+ "number": "2",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "PC14 is a 5 V tolerant GPIO supplied through the power switch with a 3 mA limit that can only sink current in output mode, and it doubles as the 32.768 kHz oscillator input OSC32_IN."+ },+ {+ "number": "3",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "PC15 is a 5 V tolerant GPIO supplied through the power switch with a 3 mA limit that can only sink current in output mode, and it doubles as the 32.768 kHz oscillator output OSC32_OUT."+ },+ {+ "number": "4",+ "name": "VBAT",+ "type": "power_in",+ "description": "VBAT supplies the RTC, TAMP, the low-speed 32.768 kHz oscillator and backup registers from 1.55 V to 3.6 V when VDD is not present."+ },+ {+ "number": "5",+ "name": "VREF+",+ "type": "power_in",+ "description": "VREF+ is the analog reference input or internal buffer output and must equal VDDA when VDDA is below 2 V, or lie between 2 V and VDDA when VDDA is 2 V or above."+ },+ {+ "number": "6",+ "name": "VDD/VDDA",+ "type": "power_in",+ "description": "VDD/VDDA is the main 1.7 V to 3.6 V supply for the internal regulator, the I/O ring and the analog blocks."+ },+ {+ "number": "7",+ "name": "VSS/VSSA",+ "type": "power_in",+ "description": "VSS/VSSA is the ground reference for the digital and analog supplies."+ },+ {+ "number": "8",+ "name": "PF0-OSC_IN",+ "type": "bidirectional",+ "description": "PF0 is a 5 V tolerant FT I/O that doubles as the high-speed crystal oscillator input OSC_IN."+ },+ {+ "number": "9",+ "name": "PF1-OSC_OUT",+ "type": "bidirectional",+ "description": "PF1 is a 5 V tolerant FT I/O that doubles as the high-speed crystal oscillator output OSC_OUT."+ },+ {+ "number": "10",+ "name": "PF2-NRST",+ "type": "bidirectional",+ "description": "PF2 is an RST-type I/O with embedded weak pull-up that acts as the NRST reset input when configured as reset, and as a 5 V tolerant FT GPIO otherwise."+ },+ {+ "number": "11",+ "name": "PA0",+ "type": "bidirectional",+ "description": "PA0 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as ADC input ADC_IN0, TAMP_IN2 and WKUP1."+ },+ {+ "number": "12",+ "name": "PA1",+ "type": "bidirectional",+ "description": "PA1 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC input ADC_IN1."+ },+ {+ "number": "13",+ "name": "PA2",+ "type": "bidirectional",+ "description": "PA2 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as ADC_IN2 and WKUP4."+ },+ {+ "number": "14",+ "name": "PA3",+ "type": "bidirectional",+ "description": "PA3 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN3."+ },+ {+ "number": "15",+ "name": "PA4",+ "type": "bidirectional",+ "description": "PA4 is a 3.6 V tolerant TT_a I/O with an analog switch function that also serves as ADC_IN4 and DAC1_OUT1."+ },+ {+ "number": "16",+ "name": "PA5",+ "type": "bidirectional",+ "description": "PA5 is a 3.6 V tolerant TT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN5 and DAC1_OUT2."+ },+ {+ "number": "17",+ "name": "PA6",+ "type": "bidirectional",+ "description": "PA6 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN6."+ },+ {+ "number": "18",+ "name": "PA7",+ "type": "bidirectional",+ "description": "PA7 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as ADC_IN7."+ },+ {+ "number": "19",+ "name": "PB0",+ "type": "bidirectional",+ "description": "PB0 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN8 and COMP3_INP0."+ },+ {+ "number": "20",+ "name": "PB1",+ "type": "bidirectional",+ "description": "PB1 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN9 and COMP1_INM6."+ },+ {+ "number": "21",+ "name": "PB2",+ "type": "bidirectional",+ "description": "PB2 is a 5 V tolerant FT_ea I/O with a switchable diode to VDDIOx and an analog switch function that also serves as ADC_IN10."+ },+ {+ "number": "22",+ "name": "PB10",+ "type": "bidirectional",+ "description": "PB10 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as ADC_IN11."+ },+ {+ "number": "23",+ "name": "PB11",+ "type": "bidirectional",+ "description": "PB11 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as ADC_IN15."+ },+ {+ "number": "24",+ "name": "PB12",+ "type": "bidirectional",+ "description": "PB12 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as ADC_IN16."+ },+ {+ "number": "25",+ "name": "PB13",+ "type": "bidirectional",+ "description": "PB13 is a 5 V tolerant FT_fs I/O with Fm+ capability that is supplied from VDDIO2 only."+ },+ {+ "number": "26",+ "name": "PB14",+ "type": "bidirectional",+ "description": "PB14 is a 5 V tolerant FT_fs I/O with Fm+ capability that is supplied from VDDIO2 only."+ },+ {+ "number": "27",+ "name": "PB15",+ "type": "bidirectional",+ "description": "PB15 is a 5 V tolerant FT_fcs I/O with Fm+ and USB Type-C PD capability that is supplied from VDDIO2 only, and may have a pull-down present at reset depending on PD1."+ },+ {+ "number": "28",+ "name": "PA8",+ "type": "bidirectional",+ "description": "PA8 is a 5 V tolerant FT_fcs I/O with Fm+ and USB Type-C PD capability that is supplied from VDDIO2 only, and may have a pull-down present at reset depending on PA9."+ },+ {+ "number": "29",+ "name": "PA9",+ "type": "bidirectional",+ "description": "PA9 is a 5 V tolerant FT_fds I/O with Fm+ and USB Type-C dead-battery capability that is supplied from VDDIO2 only and can be remapped in place of PA11."+ },+ {+ "number": "30",+ "name": "VSS",+ "type": "power_in",+ "description": "VSS is a ground pin of the device."+ },+ {+ "number": "31",+ "name": "VDDIO2",+ "type": "power_in",+ "description": "VDDIO2 is the separate I/O supply from 1.65 V to 3.6 V for selected I/Os and VDDUSB and must not be applied without valid VDD."+ },+ {+ "number": "32",+ "name": "PA10",+ "type": "bidirectional",+ "description": "PA10 is a 5 V tolerant FT_fds I/O with Fm+ and USB Type-C dead-battery capability that is supplied from VDDIO2 only and can be remapped in place of PA12."+ },+ {+ "number": "33",+ "name": "PA11 [PA9]",+ "type": "bidirectional",+ "description": "PA11 is a 5 V tolerant FT_fus I/O with Fm+ and USB function that is supplied from VDDIO2 and carries the USB_DM signal."+ },+ {+ "number": "34",+ "name": "PA12 [PA10]",+ "type": "bidirectional",+ "description": "PA12 is a 5 V tolerant FT_fus I/O with Fm+ and USB function that is supplied from VDDIO2 and carries the USB_DP signal."+ },+ {+ "number": "35",+ "name": "PA13",+ "type": "bidirectional",+ "description": "PA13 is a 5 V tolerant FT_es I/O with a switchable diode to VDDIOx that is configured as SWDIO with an internal pull-up after reset."+ },+ {+ "number": "36",+ "name": "PA14-BOOT0",+ "type": "bidirectional",+ "description": "PA14 is a 5 V tolerant FT_s I/O supplied from VDDIO2 only that is configured as SWCLK with an internal pull-down after reset and is shared with the BOOT0 pin."+ },+ {+ "number": "37",+ "name": "PA15",+ "type": "bidirectional",+ "description": "PA15 is a 5 V tolerant FT_s I/O supplied from VDDIO2 only with alternate functions including SPI1_NSS, USART2_RX and USB_NOE."+ },+ {+ "number": "38",+ "name": "PD0",+ "type": "bidirectional",+ "description": "PD0 is a 5 V tolerant FT_cs I/O with USB Type-C PD capability that is supplied from VDDIO2 only and may have a pull-down present at reset."+ },+ {+ "number": "39",+ "name": "PD1",+ "type": "bidirectional",+ "description": "PD1 is a 5 V tolerant FT_ds I/O with USB Type-C dead-battery capability that is supplied from VDDIO2 only and may have a pull-down present at reset."+ },+ {+ "number": "40",+ "name": "PD2",+ "type": "bidirectional",+ "description": "PD2 is a 5 V tolerant FT_cs I/O with USB Type-C PD capability that is supplied from VDDIO2 only and may have a pull-down present at reset."+ },+ {+ "number": "41",+ "name": "PD3",+ "type": "bidirectional",+ "description": "PD3 is a 5 V tolerant FT_ds I/O with USB Type-C dead-battery capability that is supplied from VDDIO2 only and may have a pull-down present at reset."+ },+ {+ "number": "42",+ "name": "PB3",+ "type": "bidirectional",+ "description": "PB3 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as COMP2_INM6."+ },+ {+ "number": "43",+ "name": "PB4",+ "type": "bidirectional",+ "description": "PB4 is a 5 V tolerant FT_a I/O with an analog switch function that also serves as COMP2_INP0."+ },+ {+ "number": "44",+ "name": "PB5",+ "type": "bidirectional",+ "description": "PB5 is a 5 V tolerant FT I/O that also serves as WKUP6."+ },+ {+ "number": "45",+ "name": "PB6",+ "type": "bidirectional",+ "description": "PB6 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as COMP2_INP1."+ },+ {+ "number": "46",+ "name": "PB7",+ "type": "bidirectional",+ "description": "PB7 is a 5 V tolerant FT_fa I/O with Fm+ capability and an analog switch function that also serves as COMP2_INM7 and PVD_IN."+ },+ {+ "number": "47",+ "name": "PB8",+ "type": "bidirectional",+ "description": "PB8 is a 5 V tolerant FT_f I/O with Fm+ capability."+ },+ {+ "number": "48",+ "name": "PB9",+ "type": "bidirectional",+ "description": "PB9 is a 5 V tolerant FT_f I/O with Fm+ capability that also serves as IR_OUT and TIM17_CH1."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: MPN STM32G0B1CBT6N decodes to LQFP48 (C), 128 Kbyte flash (B), temperature suffix 6, and N version. "+ ],+ "pages_sent": 90,+ "cost_usd": 0.2798,+ "at": "2026-11-13T17:28:29"+ },+ "datasheet": {+ "url": "https://www.st.com/resource/en/datasheet/stm32g0b1ce.pdf",+ "pages": 165,+ "sha256": "8433e47bc5da5cac",+ "source_tier": "mfr"+ },+ "cad": "Adom_Gen derived land; symbol and 3D generated",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32g0b1cbt6n.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.86,+ 8.86,+ 1.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d55dbb5ee58b4857c9b8f989497c104885bf7b5754e7a64d0116c6229472e67e",+ "checked": "2026-11-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32g0b1cbt6n-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.86,+ 8.86,+ 1.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "c2b6af85f0617158a9820d99379e8bd474418fc1e588aa02279ab371d559b768",+ "checked": "2026-11-13",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "private",+ "org": "adom",+ "author": {+ "name": "Ray"+ }+}
stm32g0b1cbt6n-hero.glbadded⋯ 1 unchanged line ⋯
stm32g0b1cbt6n-hero.overlay.jsonadded+1145@@ -0,0 +1,1145 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "STM32G0B1CBT6N",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 48,+ "span_mm": 9.7,+ "dash_mm": 0.2425,+ "gap_mm": 0.1455,+ "pad_stroke_mm": 0.0582+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 1,+ "pin1": {+ "source": "added dot (AI)",+ "pad": "1",+ "center_mm": [+ -2.75,+ 5.15+ ],+ "r_mm": 0.1+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 48,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.776,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -4.43,+ 4.43,+ -4.43,+ 4.43+ ],+ "pads_bbox_mm": [+ -4.85,+ 4.85,+ -4.85,+ 4.85+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "stm32g0b1cbt6n-etched.glb",+ "glb_sha256": "3bdade4a40763b7d7812f66426fda0c71152ed52d60ed2bdae295b87ec6122ad",+ "footprint": "stm32g0b1cbt6n.kicad_mod",+ "footprint_sha256": "db32c09e3f981f8f6cc367cdc6deb88c4629c1d0af7b09f74a2c858c2d546c48",+ "pins": "page.json component.pins",+ "pins_sha256": "e891a9e984542f803ffcc562de26dbfc39383299875f221b3d05211b56f5e4a9"+ },+ "generator": "adom-wiki 1.8.24 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "PC13",+ "x": -2.75,+ "y": 5.35,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "2",+ "text": "PC14-OSC32_IN",+ "x": -2.25,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "3",+ "text": "PC15-OSC32_OUT",+ "x": -1.75,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "4",+ "text": "VBAT",+ "x": -1.25,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "5",+ "text": "VREF+",+ "x": -0.75,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "6",+ "text": "VDD/VDDA",+ "x": -0.25,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "7",+ "text": "VSS/VSSA",+ "x": 0.25,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "8",+ "text": "PF0-OSC_IN",+ "x": 0.75,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "9",+ "text": "PF1-OSC_OUT",+ "x": 1.25,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "10",+ "text": "PF2-NRST",+ "x": 1.75,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "11",+ "text": "PA0",+ "x": 2.25,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "12",+ "text": "PA1",+ "x": 2.75,+ "y": 4.95,+ "align": "right",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "13",+ "text": "PA2",+ "x": 4.95,+ "y": 2.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "14",+ "text": "PA3",+ "x": 4.95,+ "y": 2.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "15",+ "text": "PA4",+ "x": 4.95,+ "y": 1.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "16",+ "text": "PA5",+ "x": 4.95,+ "y": 1.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "17",+ "text": "PA6",+ "x": 4.95,+ "y": 0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "18",+ "text": "PA7",+ "x": 4.95,+ "y": 0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "19",+ "text": "PB0",+ "x": 4.95,+ "y": -0.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "20",+ "text": "PB1",+ "x": 4.95,+ "y": -0.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "21",+ "text": "PB2",+ "x": 4.95,+ "y": -1.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "22",+ "text": "PB10",+ "x": 4.95,+ "y": -1.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "23",+ "text": "PB11",+ "x": 4.95,+ "y": -2.25,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "24",+ "text": "PB12",+ "x": 4.95,+ "y": -2.75,+ "align": "left",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "25",+ "text": "PB13",+ "x": 2.75,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "26",+ "text": "PB14",+ "x": 2.25,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "27",+ "text": "PB15",+ "x": 1.75,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "28",+ "text": "PA8",+ "x": 1.25,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "29",+ "text": "PA9",+ "x": 0.75,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "30",+ "text": "VSS",+ "x": 0.25,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "31",+ "text": "VDDIO2",+ "x": -0.25,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "32",+ "text": "PA10",+ "x": -0.75,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "33",+ "text": "PA11 [PA9]",+ "x": -1.25,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "34",+ "text": "PA12 [PA10]",+ "x": -1.75,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "35",+ "text": "PA13",+ "x": -2.25,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "36",+ "text": "PA14-BOOT0",+ "x": -2.75,+ "y": -4.95,+ "align": "left",+ "vertical": true,+ "h": 0.25+ },+ {+ "pad": "37",+ "text": "PA15",+ "x": -4.95,+ "y": -2.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "38",+ "text": "PD0",+ "x": -4.95,+ "y": -2.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "39",+ "text": "PD1",+ "x": -4.95,+ "y": -1.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "40",+ "text": "PD2",+ "x": -4.95,+ "y": -1.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "41",+ "text": "PD3",+ "x": -4.95,+ "y": -0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "42",+ "text": "PB3",+ "x": -4.95,+ "y": -0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "43",+ "text": "PB4",+ "x": -4.95,+ "y": 0.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "44",+ "text": "PB5",+ "x": -4.95,+ "y": 0.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "45",+ "text": "PB6",+ "x": -4.95,+ "y": 1.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "46",+ "text": "PB7",+ "x": -4.95,+ "y": 1.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "47",+ "text": "PB8",+ "x": -4.95,+ "y": 2.25,+ "align": "right",+ "vertical": false,+ "h": 0.25+ },+ {+ "pad": "48",+ "text": "PB9",+ "x": -4.95,+ "y": 2.75,+ "align": "right",+ "vertical": false,+ "h": 0.25+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ -2.75,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "rect",+ "center_mm": [+ -2.25,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ -1.75,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "rect",+ "center_mm": [+ -1.25,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "rect",+ "center_mm": [+ -0.75,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "rect",+ "center_mm": [+ -0.25,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "rect",+ "center_mm": [+ 0.25,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "rect",+ "center_mm": [+ 0.75,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 1.25,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "rect",+ "center_mm": [+ 1.75,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "rect",+ "center_mm": [+ 2.25,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "rect",+ "center_mm": [+ 2.75,+ 4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "rect",+ "center_mm": [+ 4.25,+ 2.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "rect",+ "center_mm": [+ 4.25,+ 2.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "rect",+ "center_mm": [+ 4.25,+ 1.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "rect",+ "center_mm": [+ 4.25,+ 1.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "rect",+ "center_mm": [+ 4.25,+ 0.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "rect",+ "center_mm": [+ 4.25,+ 0.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "rect",+ "center_mm": [+ 4.25,+ -0.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "rect",+ "center_mm": [+ 4.25,+ -0.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "rect",+ "center_mm": [+ 4.25,+ -1.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "rect",+ "center_mm": [+ 4.25,+ -1.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "rect",+ "center_mm": [+ 4.25,+ -2.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "rect",+ "center_mm": [+ 4.25,+ -2.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "25",+ "shape": "rect",+ "center_mm": [+ 2.75,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "26",+ "shape": "rect",+ "center_mm": [+ 2.25,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "27",+ "shape": "rect",+ "center_mm": [+ 1.75,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "28",+ "shape": "rect",+ "center_mm": [+ 1.25,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "29",+ "shape": "rect",+ "center_mm": [+ 0.75,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "30",+ "shape": "rect",+ "center_mm": [+ 0.25,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "31",+ "shape": "rect",+ "center_mm": [+ -0.25,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "32",+ "shape": "rect",+ "center_mm": [+ -0.75,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "33",+ "shape": "rect",+ "center_mm": [+ -1.25,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "34",+ "shape": "rect",+ "center_mm": [+ -1.75,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "35",+ "shape": "rect",+ "center_mm": [+ -2.25,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "36",+ "shape": "rect",+ "center_mm": [+ -2.75,+ -4.25+ ],+ "size_mm": [+ 0.3,+ 1.2+ ],+ "rot": 0.0+ },+ {+ "number": "37",+ "shape": "rect",+ "center_mm": [+ -4.25,+ -2.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "38",+ "shape": "rect",+ "center_mm": [+ -4.25,+ -2.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "39",+ "shape": "rect",+ "center_mm": [+ -4.25,+ -1.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "40",+ "shape": "rect",+ "center_mm": [+ -4.25,+ -1.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "41",+ "shape": "rect",+ "center_mm": [+ -4.25,+ -0.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "42",+ "shape": "rect",+ "center_mm": [+ -4.25,+ -0.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "43",+ "shape": "rect",+ "center_mm": [+ -4.25,+ 0.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "44",+ "shape": "rect",+ "center_mm": [+ -4.25,+ 0.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "45",+ "shape": "rect",+ "center_mm": [+ -4.25,+ 1.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "46",+ "shape": "rect",+ "center_mm": [+ -4.25,+ 1.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "47",+ "shape": "rect",+ "center_mm": [+ -4.25,+ 2.25+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ },+ {+ "number": "48",+ "shape": "rect",+ "center_mm": [+ -4.25,+ 2.75+ ],+ "size_mm": [+ 1.2,+ 0.3+ ],+ "rot": 0.0+ }+ ]+}
stm32g0b1cbt6n.glbadded⋯ 1 unchanged line ⋯
stm32g0b1cbt6n.kicad_modadded+70@@ -0,0 +1,70 @@+(footprint "STMicroelectronics_STM32_ccff95"+ (version 20240108)+ (generator "adom_assets")+ (layer "F.Cu")+ (descr "Generated from the STMicroelectronics datasheet land pattern (family R1596, spec ccff95abd7)")+ (tags "adom generated")+ (attr smd)+ (property "Reference" "REF**" (at 0 -6.1 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))+ (property "Value" "STMicroelectronics_STM32_ccff95" (at 0 6.1 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))))+ (fp_line (start -3.5 -3.5) (end 3.5 -3.5) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+ (fp_line (start 3.5 -3.5) (end 3.5 3.5) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+ (fp_line (start 3.5 3.5) (end -3.5 3.5) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+ (fp_line (start -3.5 3.5) (end -3.5 -3.5) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+ (fp_line (start -3.3 3.65) (end -3.3 4.85) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))+ (pad "1" smd rect (at -2.75 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "2" smd rect (at -2.25 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "3" smd rect (at -1.75 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "4" smd rect (at -1.25 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "5" smd rect (at -0.75 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "6" smd rect (at -0.25 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "7" smd rect (at 0.25 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "8" smd rect (at 0.75 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "9" smd rect (at 1.25 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "10" smd rect (at 1.75 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "11" smd rect (at 2.25 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "12" smd rect (at 2.75 4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "13" smd rect (at 4.25 2.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "14" smd rect (at 4.25 2.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "15" smd rect (at 4.25 1.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "16" smd rect (at 4.25 1.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "17" smd rect (at 4.25 0.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "18" smd rect (at 4.25 0.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "19" smd rect (at 4.25 -0.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "20" smd rect (at 4.25 -0.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "21" smd rect (at 4.25 -1.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "22" smd rect (at 4.25 -1.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "23" smd rect (at 4.25 -2.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "24" smd rect (at 4.25 -2.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "25" smd rect (at 2.75 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "26" smd rect (at 2.25 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "27" smd rect (at 1.75 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "28" smd rect (at 1.25 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "29" smd rect (at 0.75 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "30" smd rect (at 0.25 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "31" smd rect (at -0.25 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "32" smd rect (at -0.75 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "33" smd rect (at -1.25 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "34" smd rect (at -1.75 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "35" smd rect (at -2.25 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "36" smd rect (at -2.75 -4.25) (size 0.3 1.2) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "37" smd rect (at -4.25 -2.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "38" smd rect (at -4.25 -2.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "39" smd rect (at -4.25 -1.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "40" smd rect (at -4.25 -1.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "41" smd rect (at -4.25 -0.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "42" smd rect (at -4.25 -0.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "43" smd rect (at -4.25 0.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "44" smd rect (at -4.25 0.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "45" smd rect (at -4.25 1.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "46" smd rect (at -4.25 1.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "47" smd rect (at -4.25 2.25) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "48" smd rect (at -4.25 2.75) (size 1.2 0.3) (layers "F.Cu" "F.Paste" "F.Mask"))+ (model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/STMicroelectronics_STM32_ccff95.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)))+ (fp_poly+ (pts (xy -5.10 -3.15) (xy -3.75 -3.15) (xy -3.75 -3.75) (xy -3.15 -3.75) (xy -3.15 -5.10) (xy 3.15 -5.10) (xy 3.15 -3.75) (xy 3.75 -3.75) (xy 3.75 -3.15) (xy 5.10 -3.15) (xy 5.10 3.15) (xy 3.75 3.15) (xy 3.75 3.75) (xy 3.15 3.75) (xy 3.15 5.10) (xy -3.15 5.10) (xy -3.15 3.75) (xy -3.75 3.75) (xy -3.75 3.15) (xy -5.10 3.15))+ (stroke (width 0.05) (type solid))+ (fill no)+ (layer "F.CrtYd")+ )+)
stm32g0b1cbt6n.kicad_symadded+205@@ -0,0 +1,205 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "STM32G0B1CBT6N" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 33.02 0) (effects (font (size 1.27 1.27))))+ (property "Value" "STM32G0B1CBT6N" (at 0 -35.56 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "STM32G0B1CBT6N_0_1"+ (rectangle (start -12.70 30.48) (end 12.70 -33.02)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "STM32G0B1CBT6N_1_1"+ (pin bidirectional line (at -17.78 27.94 0) (length 5.08)+ (name "PC13" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 25.40 0) (length 5.08)+ (name "PC14-OSC32_IN" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 22.86 0) (length 5.08)+ (name "PC15-OSC32_OUT" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 20.32 0) (length 5.08)+ (name "VBAT" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 17.78 0) (length 5.08)+ (name "VREF+" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 15.24 0) (length 5.08)+ (name "VDD/VDDA" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 12.70 0) (length 5.08)+ (name "VSS/VSSA" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+ (name "PF0-OSC_IN" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+ (name "PF1-OSC_OUT" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+ (name "PF2-NRST" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+ (name "PA0" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 0.00 0) (length 5.08)+ (name "PA1" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+ (name "PA2" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+ (name "PA3" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+ (name "PA4" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)+ (name "PA5" (effects (font (size 1.27 1.27))))+ (number "16" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -12.70 0) (length 5.08)+ (name "PA6" (effects (font (size 1.27 1.27))))+ (number "17" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -15.24 0) (length 5.08)+ (name "PA7" (effects (font (size 1.27 1.27))))+ (number "18" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -17.78 0) (length 5.08)+ (name "PB0" (effects (font (size 1.27 1.27))))+ (number "19" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -20.32 0) (length 5.08)+ (name "PB1" (effects (font (size 1.27 1.27))))+ (number "20" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -22.86 0) (length 5.08)+ (name "PB2" (effects (font (size 1.27 1.27))))+ (number "21" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -25.40 0) (length 5.08)+ (name "PB10" (effects (font (size 1.27 1.27))))+ (number "22" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -27.94 0) (length 5.08)+ (name "PB11" (effects (font (size 1.27 1.27))))+ (number "23" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 -30.48 0) (length 5.08)+ (name "PB12" (effects (font (size 1.27 1.27))))+ (number "24" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 27.94 180) (length 5.08)+ (name "PB9" (effects (font (size 1.27 1.27))))+ (number "48" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 25.40 180) (length 5.08)+ (name "PB8" (effects (font (size 1.27 1.27))))+ (number "47" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 22.86 180) (length 5.08)+ (name "PB7" (effects (font (size 1.27 1.27))))+ (number "46" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 20.32 180) (length 5.08)+ (name "PB6" (effects (font (size 1.27 1.27))))+ (number "45" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 17.78 180) (length 5.08)+ (name "PB5" (effects (font (size 1.27 1.27))))+ (number "44" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 15.24 180) (length 5.08)+ (name "PB4" (effects (font (size 1.27 1.27))))+ (number "43" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 12.70 180) (length 5.08)+ (name "PB3" (effects (font (size 1.27 1.27))))+ (number "42" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 10.16 180) (length 5.08)+ (name "PD3" (effects (font (size 1.27 1.27))))+ (number "41" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 7.62 180) (length 5.08)+ (name "PD2" (effects (font (size 1.27 1.27))))+ (number "40" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+ (name "PD1" (effects (font (size 1.27 1.27))))+ (number "39" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+ (name "PD0" (effects (font (size 1.27 1.27))))+ (number "38" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+ (name "PA15" (effects (font (size 1.27 1.27))))+ (number "37" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+ (name "PA14-BOOT0" (effects (font (size 1.27 1.27))))+ (number "36" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+ (name "PA13" (effects (font (size 1.27 1.27))))+ (number "35" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+ (name "PA12 [PA10]" (effects (font (size 1.27 1.27))))+ (number "34" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+ (name "PA11 [PA9]" (effects (font (size 1.27 1.27))))+ (number "33" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+ (name "PA10" (effects (font (size 1.27 1.27))))+ (number "32" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -15.24 180) (length 5.08)+ (name "VDDIO2" (effects (font (size 1.27 1.27))))+ (number "31" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 -17.78 180) (length 5.08)+ (name "VSS" (effects (font (size 1.27 1.27))))+ (number "30" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -20.32 180) (length 5.08)+ (name "PA9" (effects (font (size 1.27 1.27))))+ (number "29" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -22.86 180) (length 5.08)+ (name "PA8" (effects (font (size 1.27 1.27))))+ (number "28" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -25.40 180) (length 5.08)+ (name "PB15" (effects (font (size 1.27 1.27))))+ (number "27" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -27.94 180) (length 5.08)+ (name "PB14" (effects (font (size 1.27 1.27))))+ (number "26" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at 17.78 -30.48 180) (length 5.08)+ (name "PB13" (effects (font (size 1.27 1.27))))+ (number "25" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
stm32g0b1cbt6n.lbradded+237@@ -0,0 +1,237 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="STMicroelectronics_STM32_ccff95">+ <description>48 pads, 9.7 x 9.7 mm. Generated from the STMicroelectronics datasheet land pattern (family R1596, spec ccff95abd7)</description>+ <smd name="1" x="-2.7500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="2" x="-2.2500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="3" x="-1.7500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="4" x="-1.2500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="5" x="-0.7500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="6" x="-0.2500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="7" x="0.2500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="8" x="0.7500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="9" x="1.2500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="10" x="1.7500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="11" x="2.2500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="12" x="2.7500" y="-4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="13" x="4.2500" y="-2.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="14" x="4.2500" y="-2.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="15" x="4.2500" y="-1.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="16" x="4.2500" y="-1.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="17" x="4.2500" y="-0.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="18" x="4.2500" y="-0.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="19" x="4.2500" y="0.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="20" x="4.2500" y="0.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="21" x="4.2500" y="1.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="22" x="4.2500" y="1.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="23" x="4.2500" y="2.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="24" x="4.2500" y="2.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="25" x="2.7500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="26" x="2.2500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="27" x="1.7500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="28" x="1.2500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="29" x="0.7500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="30" x="0.2500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="31" x="-0.2500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="32" x="-0.7500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="33" x="-1.2500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="34" x="-1.7500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="35" x="-2.2500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="36" x="-2.7500" y="4.2500" dx="0.3000" dy="1.2000" layer="1"/>+ <smd name="37" x="-4.2500" y="2.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="38" x="-4.2500" y="2.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="39" x="-4.2500" y="1.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="40" x="-4.2500" y="1.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="41" x="-4.2500" y="0.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="42" x="-4.2500" y="0.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="43" x="-4.2500" y="-0.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="44" x="-4.2500" y="-0.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="45" x="-4.2500" y="-1.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="46" x="-4.2500" y="-1.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="47" x="-4.2500" y="-2.2500" dx="1.2000" dy="0.3000" layer="1"/>+ <smd name="48" x="-4.2500" y="-2.7500" dx="1.2000" dy="0.3000" layer="1"/>+ <wire x1="-3.5000" y1="3.5000" x2="3.5000" y2="3.5000" width="0.1000" layer="51"/>+ <wire x1="3.5000" y1="3.5000" x2="3.5000" y2="-3.5000" width="0.1000" layer="51"/>+ <wire x1="3.5000" y1="-3.5000" x2="-3.5000" y2="-3.5000" width="0.1000" layer="51"/>+ <wire x1="-3.5000" y1="-3.5000" x2="-3.5000" y2="3.5000" width="0.1000" layer="51"/>+ <wire x1="-3.3000" y1="-3.6500" x2="-3.3000" y2="-4.8500" width="0.1200" layer="21"/>+ <text x="0" y="5.450" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-5.450" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="STM32G0B1CBT6N">+ <wire x1="-12.7" y1="30.48" x2="12.7" y2="30.48" width="0.254" layer="94"/>+ <wire x1="12.7" y1="30.48" x2="12.7" y2="-33.02" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-33.02" x2="-12.7" y2="-33.02" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-33.02" x2="-12.7" y2="30.48" width="0.254" layer="94"/>+ <text x="0.0000" y="33.0200" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-35.5600" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="PC13" x="-17.78" y="27.94" length="middle" direction="io"/>+ <pin name="PC14-OSC32_IN" x="-17.78" y="25.4" length="middle" direction="io"/>+ <pin name="PC15-OSC32_OUT" x="-17.78" y="22.86" length="middle" direction="io"/>+ <pin name="VBAT" x="-17.78" y="20.32" length="middle" direction="pwr"/>+ <pin name="VREF+" x="-17.78" y="17.78" length="middle" direction="pwr"/>+ <pin name="VDD/VDDA" x="-17.78" y="15.24" length="middle" direction="pwr"/>+ <pin name="VSS/VSSA" x="-17.78" y="12.7" length="middle" direction="pwr"/>+ <pin name="PF0-OSC_IN" x="-17.78" y="10.16" length="middle" direction="io"/>+ <pin name="PF1-OSC_OUT" x="-17.78" y="7.62" length="middle" direction="io"/>+ <pin name="PF2-NRST" x="-17.78" y="5.08" length="middle" direction="io"/>+ <pin name="PA0" x="-17.78" y="2.54" length="middle" direction="io"/>+ <pin name="PA1" x="-17.78" y="0" length="middle" direction="io"/>+ <pin name="PA2" x="-17.78" y="-2.54" length="middle" direction="io"/>+ <pin name="PA3" x="-17.78" y="-5.08" length="middle" direction="io"/>+ <pin name="PA4" x="-17.78" y="-7.62" length="middle" direction="io"/>+ <pin name="PA5" x="-17.78" y="-10.16" length="middle" direction="io"/>+ <pin name="PA6" x="-17.78" y="-12.7" length="middle" direction="io"/>+ <pin name="PA7" x="-17.78" y="-15.24" length="middle" direction="io"/>+ <pin name="PB0" x="-17.78" y="-17.78" length="middle" direction="io"/>+ <pin name="PB1" x="-17.78" y="-20.32" length="middle" direction="io"/>+ <pin name="PB2" x="-17.78" y="-22.86" length="middle" direction="io"/>+ <pin name="PB10" x="-17.78" y="-25.4" length="middle" direction="io"/>+ <pin name="PB11" x="-17.78" y="-27.94" length="middle" direction="io"/>+ <pin name="PB12" x="-17.78" y="-30.48" length="middle" direction="io"/>+ <pin name="PB9" x="17.78" y="27.94" length="middle" direction="io" rot="R180"/>+ <pin name="PB8" x="17.78" y="25.4" length="middle" direction="io" rot="R180"/>+ <pin name="PB7" x="17.78" y="22.86" length="middle" direction="io" rot="R180"/>+ <pin name="PB6" x="17.78" y="20.32" length="middle" direction="io" rot="R180"/>+ <pin name="PB5" x="17.78" y="17.78" length="middle" direction="io" rot="R180"/>+ <pin name="PB4" x="17.78" y="15.24" length="middle" direction="io" rot="R180"/>+ <pin name="PB3" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>+ <pin name="PD3" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>+ <pin name="PD2" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>+ <pin name="PD1" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+ <pin name="PD0" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+ <pin name="PA15" x="17.78" y="0" length="middle" direction="io" rot="R180"/>+ <pin name="PA14-BOOT0" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+ <pin name="PA13" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+ <pin name="PA12_PA10" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+ <pin name="PA11_PA9" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>+ <pin name="PA10" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+ <pin name="VDDIO2" x="17.78" y="-15.24" length="middle" direction="pwr" rot="R180"/>+ <pin name="VSS" x="17.78" y="-17.78" length="middle" direction="pwr" rot="R180"/>+ <pin name="PA9" x="17.78" y="-20.32" length="middle" direction="io" rot="R180"/>+ <pin name="PA8" x="17.78" y="-22.86" length="middle" direction="io" rot="R180"/>+ <pin name="PB15" x="17.78" y="-25.4" length="middle" direction="io" rot="R180"/>+ <pin name="PB14" x="17.78" y="-27.94" length="middle" direction="io" rot="R180"/>+ <pin name="PB13" x="17.78" y="-30.48" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="STM32G0B1CBT6N" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="STM32G0B1CBT6N" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="STMicroelectronics_STM32_ccff95">+ <connects>+ <connect gate="G$1" pin="PC13" pad="1"/>+ <connect gate="G$1" pin="PC14-OSC32_IN" pad="2"/>+ <connect gate="G$1" pin="PC15-OSC32_OUT" pad="3"/>+ <connect gate="G$1" pin="VBAT" pad="4"/>+ <connect gate="G$1" pin="VREF+" pad="5"/>+ <connect gate="G$1" pin="VDD/VDDA" pad="6"/>+ <connect gate="G$1" pin="VSS/VSSA" pad="7"/>+ <connect gate="G$1" pin="PF0-OSC_IN" pad="8"/>+ <connect gate="G$1" pin="PF1-OSC_OUT" pad="9"/>+ <connect gate="G$1" pin="PF2-NRST" pad="10"/>+ <connect gate="G$1" pin="PA0" pad="11"/>+ <connect gate="G$1" pin="PA1" pad="12"/>+ <connect gate="G$1" pin="PA2" pad="13"/>+ <connect gate="G$1" pin="PA3" pad="14"/>+ <connect gate="G$1" pin="PA4" pad="15"/>+ <connect gate="G$1" pin="PA5" pad="16"/>+ <connect gate="G$1" pin="PA6" pad="17"/>+ <connect gate="G$1" pin="PA7" pad="18"/>+ <connect gate="G$1" pin="PB0" pad="19"/>+ <connect gate="G$1" pin="PB1" pad="20"/>+ <connect gate="G$1" pin="PB2" pad="21"/>+ <connect gate="G$1" pin="PB10" pad="22"/>+ <connect gate="G$1" pin="PB11" pad="23"/>+ <connect gate="G$1" pin="PB12" pad="24"/>+ <connect gate="G$1" pin="PB9" pad="48"/>+ <connect gate="G$1" pin="PB8" pad="47"/>+ <connect gate="G$1" pin="PB7" pad="46"/>+ <connect gate="G$1" pin="PB6" pad="45"/>+ <connect gate="G$1" pin="PB5" pad="44"/>+ <connect gate="G$1" pin="PB4" pad="43"/>+ <connect gate="G$1" pin="PB3" pad="42"/>+ <connect gate="G$1" pin="PD3" pad="41"/>+ <connect gate="G$1" pin="PD2" pad="40"/>+ <connect gate="G$1" pin="PD1" pad="39"/>+ <connect gate="G$1" pin="PD0" pad="38"/>+ <connect gate="G$1" pin="PA15" pad="37"/>+ <connect gate="G$1" pin="PA14-BOOT0" pad="36"/>+ <connect gate="G$1" pin="PA13" pad="35"/>+ <connect gate="G$1" pin="PA12_PA10" pad="34"/>+ <connect gate="G$1" pin="PA11_PA9" pad="33"/>+ <connect gate="G$1" pin="PA10" pad="32"/>+ <connect gate="G$1" pin="VDDIO2" pad="31"/>+ <connect gate="G$1" pin="VSS" pad="30"/>+ <connect gate="G$1" pin="PA9" pad="29"/>+ <connect gate="G$1" pin="PA8" pad="28"/>+ <connect gate="G$1" pin="PB15" pad="27"/>+ <connect gate="G$1" pin="PB14" pad="26"/>+ <connect gate="G$1" pin="PB13" pad="25"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
stm32g0b1cbt6n.stepadded+21190@@ -0,0 +1,71600 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-11-13T17:25:29',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('STMicroelectronics_STM32_ccff95',+ 'STMicroelectronics_STM32_ccff95','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#919,#2057,#3195,#4333,#5471,+ #6609,#7747,#8885,#10023,#11161,#12299,#13437,#14575,#15713,#16851,+ #17989,#19127,#20265,#21403,#22541,#23679,#24817,#25955,#27093,+ #28231,#29369,#30507,#31645,#32783,#33921,#35059,#36197,#37335,+ #38473,#39611,#40749,#41887,#43041,#44195,#45349,#46503,#47657,+ #48811,#49965,#51119,#52273,#53427,#54581,#55735),#55833);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#141,#232,#335,#413,#483,#546,#605,#652,#711,+ #773,#820,#846,#853,#860,#915));+#17 = ADVANCED_FACE('',(#18),#31,.T.);+#18 = FACE_BOUND('',#19,.T.);+#19 = EDGE_LOOP('',(#20,#54,#89,#116));+#20 = ORIENTED_EDGE('',*,*,#21,.T.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(3.5,-3.5,0.73));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(3.384688128857,-3.384688128857,1.550486596563)+ );+#26 = SURFACE_CURVE('',#27,(#30,#42),.PCURVE_S1.);+#27 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#28,#29),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#28 = CARTESIAN_POINT('',(3.5,-3.5,0.73));+#29 = CARTESIAN_POINT('',(3.377729473809,-3.377729473809,1.6));+#30 = PCURVE('',#31,#36);+#31 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#32,#33)+ ,(#34,#35)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#32 = CARTESIAN_POINT('',(-3.5,-3.5,0.73));+#33 = CARTESIAN_POINT('',(-3.377729473809,-3.377729473809,1.6));+#34 = CARTESIAN_POINT('',(3.5,-3.5,0.73));+#35 = CARTESIAN_POINT('',(3.377729473809,-3.377729473809,1.6));+#36 = DEFINITIONAL_REPRESENTATION('',(#37),#41);+#37 = LINE('',#38,#39);+#38 = CARTESIAN_POINT('',(7.,0.));+#39 = VECTOR('',#40,1.);+#40 = DIRECTION('',(0.,1.));+#41 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#42 = PCURVE('',#43,#48);+#43 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#44,#45)+ ,(#46,#47)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#44 = CARTESIAN_POINT('',(3.5,-3.5,0.73));+#45 = CARTESIAN_POINT('',(3.377729473809,-3.377729473809,1.6));+#46 = CARTESIAN_POINT('',(3.5,3.5,0.73));+#47 = CARTESIAN_POINT('',(3.377729473809,3.377729473809,1.6));+#48 = DEFINITIONAL_REPRESENTATION('',(#49),#53);+#49 = LINE('',#50,#51);+#50 = CARTESIAN_POINT('',(0.,0.));+#51 = VECTOR('',#52,1.);+#52 = DIRECTION('',(0.,1.));+#53 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#54 = ORIENTED_EDGE('',*,*,#55,.F.);+#55 = EDGE_CURVE('',#56,#24,#58,.T.);+#56 = VERTEX_POINT('',#57);+#57 = CARTESIAN_POINT('',(-3.384688128857,-3.384688128857,1.550486596563+ ));+#58 = SURFACE_CURVE('',#59,(#65,#71),.PCURVE_S1.);+#59 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#60,#61,#62,#63,#64),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#60 = CARTESIAN_POINT('',(-3.798122216451,-3.384688128857,1.550486596563+ ));+#61 = CARTESIAN_POINT('',(-3.591405172654,-3.384688128857,1.550486596563+ ));+#62 = CARTESIAN_POINT('',(0.,-3.384688128857,1.550486596563));+#63 = CARTESIAN_POINT('',(3.591405172654,-3.384688128857,1.550486596563)+ );+#64 = CARTESIAN_POINT('',(3.798122216451,-3.384688128857,1.550486596563)+ );+#65 = PCURVE('',#31,#66);+#66 = DEFINITIONAL_REPRESENTATION('',(#67),#70);+#67 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#68,#69),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(-6.958655047993E-03,6.762417602666),.PIECEWISE_BEZIER_KNOTS.);+#68 = CARTESIAN_POINT('',(9.899113105957E-16,0.943088042026));+#69 = CARTESIAN_POINT('',(7.,0.943088042026));+#70 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#71 = PCURVE('',#72,#83);+#72 = B_SPLINE_SURFACE_WITH_KNOTS('',1,2,(+ (#73,#74,#75,#76,#77)+ ,(#78,#79,#80,#81,#82+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(3,1,1,3),(0.,6.769376257714),(+ -0.420392742642,-6.958655047993E-03,6.762417602666,7.17585169026),+ .UNSPECIFIED.);+#73 = CARTESIAN_POINT('',(-3.798122216451,-3.384688128857,1.550486596563+ ));+#74 = CARTESIAN_POINT('',(-3.591405172654,-3.384688128857,1.550486596563+ ));+#75 = CARTESIAN_POINT('',(0.,-3.384688128857,1.550486596563));+#76 = CARTESIAN_POINT('',(3.591405172654,-3.384688128857,1.550486596563)+ );+#77 = CARTESIAN_POINT('',(3.798122216451,-3.384688128857,1.550486596563)+ );+#78 = CARTESIAN_POINT('',(-3.798122216451,-3.327729473809,1.6));+#79 = CARTESIAN_POINT('',(-3.591405172654,-3.327729473809,1.6));+#80 = CARTESIAN_POINT('',(-4.440892098501E-16,-3.327729473809,1.6));+#81 = CARTESIAN_POINT('',(3.591405172654,-3.327729473809,1.6));+#82 = CARTESIAN_POINT('',(3.798122216451,-3.327729473809,1.6));+#83 = DEFINITIONAL_REPRESENTATION('',(#84),#88);+#84 = LINE('',#85,#86);+#85 = CARTESIAN_POINT('',(0.,0.));+#86 = VECTOR('',#87,1.);+#87 = DIRECTION('',(0.,1.));+#88 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#89 = ORIENTED_EDGE('',*,*,#90,.F.);+#90 = EDGE_CURVE('',#91,#56,#93,.T.);+#91 = VERTEX_POINT('',#92);+#92 = CARTESIAN_POINT('',(-3.5,-3.5,0.73));+#93 = SURFACE_CURVE('',#94,(#97,#104),.PCURVE_S1.);+#94 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#95,#96),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#95 = CARTESIAN_POINT('',(-3.5,-3.5,0.73));+#96 = CARTESIAN_POINT('',(-3.377729473809,-3.377729473809,1.6));+#97 = PCURVE('',#31,#98);+#98 = DEFINITIONAL_REPRESENTATION('',(#99),#103);+#99 = LINE('',#100,#101);+#100 = CARTESIAN_POINT('',(0.,0.));+#101 = VECTOR('',#102,1.);+#102 = DIRECTION('',(0.,1.));+#103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#104 = PCURVE('',#105,#110);+#105 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#106,#107)+ ,(#108,#109)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#106 = CARTESIAN_POINT('',(-3.5,3.5,0.73));+#107 = CARTESIAN_POINT('',(-3.377729473809,3.377729473809,1.6));+#108 = CARTESIAN_POINT('',(-3.5,-3.5,0.73));+#109 = CARTESIAN_POINT('',(-3.377729473809,-3.377729473809,1.6));+#110 = DEFINITIONAL_REPRESENTATION('',(#111),#115);+#111 = LINE('',#112,#113);+#112 = CARTESIAN_POINT('',(7.,0.));+#113 = VECTOR('',#114,1.);+#114 = DIRECTION('',(0.,1.));+#115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#116 = ORIENTED_EDGE('',*,*,#117,.T.);+#117 = EDGE_CURVE('',#91,#22,#118,.T.);+#118 = SURFACE_CURVE('',#119,(#123,#129),.PCURVE_S1.);+#119 = LINE('',#120,#121);+#120 = CARTESIAN_POINT('',(-3.5,-3.5,0.73));+#121 = VECTOR('',#122,1.);+#122 = DIRECTION('',(1.,0.,0.));+#123 = PCURVE('',#31,#124);+#124 = DEFINITIONAL_REPRESENTATION('',(#125),#128);+#125 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#126,#127),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,7.),.PIECEWISE_BEZIER_KNOTS.);+#126 = CARTESIAN_POINT('',(0.,0.));+#127 = CARTESIAN_POINT('',(7.,0.));+#128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#129 = PCURVE('',#130,#135);+#130 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#131,#132)+ ,(#133,#134)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#131 = CARTESIAN_POINT('',(-3.411459274137,-3.411459274137,0.1));+#132 = CARTESIAN_POINT('',(-3.5,-3.5,0.73));+#133 = CARTESIAN_POINT('',(3.411459274137,-3.411459274137,0.1));+#134 = CARTESIAN_POINT('',(3.5,-3.5,0.73));+#135 = DEFINITIONAL_REPRESENTATION('',(#136),#140);+#136 = LINE('',#137,#138);+#137 = CARTESIAN_POINT('',(0.,1.));+#138 = VECTOR('',#139,1.);+#139 = DIRECTION('',(1.,0.));+#140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#141 = ADVANCED_FACE('',(#142),#43,.T.);+#142 = FACE_BOUND('',#143,.T.);+#143 = EDGE_LOOP('',(#144,#173,#206,#207));+#144 = ORIENTED_EDGE('',*,*,#145,.T.);+#145 = EDGE_CURVE('',#146,#148,#150,.T.);+#146 = VERTEX_POINT('',#147);+#147 = CARTESIAN_POINT('',(3.5,3.5,0.73));+#148 = VERTEX_POINT('',#149);+#149 = CARTESIAN_POINT('',(3.384688128857,3.384688128857,1.550486596563)+ );+#150 = SURFACE_CURVE('',#151,(#154,#161),.PCURVE_S1.);+#151 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#152,#153),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#152 = CARTESIAN_POINT('',(3.5,3.5,0.73));+#153 = CARTESIAN_POINT('',(3.377729473809,3.377729473809,1.6));+#154 = PCURVE('',#43,#155);+#155 = DEFINITIONAL_REPRESENTATION('',(#156),#160);+#156 = LINE('',#157,#158);+#157 = CARTESIAN_POINT('',(7.,0.));+#158 = VECTOR('',#159,1.);+#159 = DIRECTION('',(0.,1.));+#160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#161 = PCURVE('',#162,#167);+#162 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#163,#164)+ ,(#165,#166)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#163 = CARTESIAN_POINT('',(3.5,3.5,0.73));+#164 = CARTESIAN_POINT('',(3.377729473809,3.377729473809,1.6));+#165 = CARTESIAN_POINT('',(-3.5,3.5,0.73));+#166 = CARTESIAN_POINT('',(-3.377729473809,3.377729473809,1.6));+#167 = DEFINITIONAL_REPRESENTATION('',(#168),#172);+#168 = LINE('',#169,#170);+#169 = CARTESIAN_POINT('',(0.,0.));+#170 = VECTOR('',#171,1.);+#171 = DIRECTION('',(0.,1.));+#172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#173 = ORIENTED_EDGE('',*,*,#174,.F.);+#174 = EDGE_CURVE('',#24,#148,#175,.T.);+#175 = SURFACE_CURVE('',#176,(#182,#188),.PCURVE_S1.);+#176 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#177,#178,#179,#180,#181),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#177 = CARTESIAN_POINT('',(3.384688128857,-3.798122216451,1.550486596563+ ));+#178 = CARTESIAN_POINT('',(3.384688128857,-3.591405172654,1.550486596563+ ));+#179 = CARTESIAN_POINT('',(3.384688128857,0.,1.550486596563));+#180 = CARTESIAN_POINT('',(3.384688128857,3.591405172654,1.550486596563)+ );+#181 = CARTESIAN_POINT('',(3.384688128857,3.798122216451,1.550486596563)+ );+#182 = PCURVE('',#43,#183);+#183 = DEFINITIONAL_REPRESENTATION('',(#184),#187);+#184 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#185,#186),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-6.958655047993E-03,6.762417602666),.PIECEWISE_BEZIER_KNOTS.);+#185 = CARTESIAN_POINT('',(9.899113105957E-16,0.943088042026));+#186 = CARTESIAN_POINT('',(7.,0.943088042026));+#187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#188 = PCURVE('',#189,#200);+#189 = B_SPLINE_SURFACE_WITH_KNOTS('',1,2,(+ (#190,#191,#192,#193,#194)+ ,(#195,#196,#197,#198,#199+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(3,1,1,3),(0.,6.769376257714),(+ -0.420392742642,-6.958655047993E-03,6.762417602666,7.17585169026),+ .UNSPECIFIED.);+#190 = CARTESIAN_POINT('',(3.384688128857,-3.798122216451,1.550486596563+ ));+#191 = CARTESIAN_POINT('',(3.384688128857,-3.591405172654,1.550486596563+ ));+#192 = CARTESIAN_POINT('',(3.384688128857,0.,1.550486596563));+#193 = CARTESIAN_POINT('',(3.384688128857,3.591405172654,1.550486596563)+ );+#194 = CARTESIAN_POINT('',(3.384688128857,3.798122216451,1.550486596563)+ );+#195 = CARTESIAN_POINT('',(3.327729473809,-3.798122216451,1.6));+#196 = CARTESIAN_POINT('',(3.327729473809,-3.591405172654,1.6));+#197 = CARTESIAN_POINT('',(3.327729473809,-8.881784197001E-16,1.6));+#198 = CARTESIAN_POINT('',(3.327729473809,3.591405172654,1.6));+#199 = CARTESIAN_POINT('',(3.327729473809,3.798122216451,1.6));+#200 = DEFINITIONAL_REPRESENTATION('',(#201),#205);+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(0.,0.));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.,1.));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#206 = ORIENTED_EDGE('',*,*,#21,.F.);+#207 = ORIENTED_EDGE('',*,*,#208,.T.);+#208 = EDGE_CURVE('',#22,#146,#209,.T.);+#209 = SURFACE_CURVE('',#210,(#214,#220),.PCURVE_S1.);+#210 = LINE('',#211,#212);+#211 = CARTESIAN_POINT('',(3.5,-3.5,0.73));+#212 = VECTOR('',#213,1.);+#213 = DIRECTION('',(0.,1.,0.));+#214 = PCURVE('',#43,#215);+#215 = DEFINITIONAL_REPRESENTATION('',(#216),#219);+#216 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#217,#218),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,7.),.PIECEWISE_BEZIER_KNOTS.);+#217 = CARTESIAN_POINT('',(0.,0.));+#218 = CARTESIAN_POINT('',(7.,0.));+#219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#220 = PCURVE('',#221,#226);+#221 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#222,#223)+ ,(#224,#225)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#222 = CARTESIAN_POINT('',(3.411459274137,-3.411459274137,0.1));+#223 = CARTESIAN_POINT('',(3.5,-3.5,0.73));+#224 = CARTESIAN_POINT('',(3.411459274137,3.411459274137,0.1));+#225 = CARTESIAN_POINT('',(3.5,3.5,0.73));+#226 = DEFINITIONAL_REPRESENTATION('',(#227),#231);+#227 = LINE('',#228,#229);+#228 = CARTESIAN_POINT('',(0.,1.));+#229 = VECTOR('',#230,1.);+#230 = DIRECTION('',(1.,0.));+#231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#232 = ADVANCED_FACE('',(#233),#72,.F.);+#233 = FACE_BOUND('',#234,.F.);+#234 = EDGE_LOOP('',(#235,#275,#307,#334));+#235 = ORIENTED_EDGE('',*,*,#236,.T.);+#236 = EDGE_CURVE('',#56,#237,#239,.T.);+#237 = VERTEX_POINT('',#238);+#238 = CARTESIAN_POINT('',(-3.327729473809,-3.327729473809,1.6));+#239 = SURFACE_CURVE('',#240,(#246,#255),.PCURVE_S1.);+#240 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#241,#242,#243,#244,#245),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#241 = CARTESIAN_POINT('',(-3.384688128857,-3.384688128857,+ 1.550486596563));+#242 = CARTESIAN_POINT('',(-3.370448465095,-3.370448465095,+ 1.562864947422));+#243 = CARTESIAN_POINT('',(-3.356208801333,-3.356208801333,+ 1.575243298282));+#244 = CARTESIAN_POINT('',(-3.341969137571,-3.341969137571,+ 1.587621649141));+#245 = CARTESIAN_POINT('',(-3.327729473809,-3.327729473809,1.6));+#246 = PCURVE('',#72,#247);+#247 = DEFINITIONAL_REPRESENTATION('',(#248),#254);+#248 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#249,#250,#251,#252,#253),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#249 = CARTESIAN_POINT('',(0.,-6.958655047993E-03));+#250 = CARTESIAN_POINT('',(1.692344064416,7.281008713902E-03));+#251 = CARTESIAN_POINT('',(3.384688128868,2.15206724761E-02));+#252 = CARTESIAN_POINT('',(5.077032193298,3.576033623812E-02));+#253 = CARTESIAN_POINT('',(6.769376257714,5.000000000002E-02));+#254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#255 = PCURVE('',#256,#267);+#256 = B_SPLINE_SURFACE_WITH_KNOTS('',1,2,(+ (#257,#258,#259,#260,#261)+ ,(#262,#263,#264,#265,#266+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(3,1,1,3),(0.,6.769376257714),(+ -0.420392742642,-6.958655047993E-03,6.762417602666,7.17585169026),+ .UNSPECIFIED.);+#257 = CARTESIAN_POINT('',(-3.327729473809,3.798122216451,1.6));+#258 = CARTESIAN_POINT('',(-3.327729473809,3.591405172654,1.6));+#259 = CARTESIAN_POINT('',(-3.327729473809,-4.440892098501E-16,1.6));+#260 = CARTESIAN_POINT('',(-3.327729473809,-3.591405172654,1.6));+#261 = CARTESIAN_POINT('',(-3.327729473809,-3.798122216451,1.6));+#262 = CARTESIAN_POINT('',(-3.384688128857,3.798122216451,1.550486596563+ ));+#263 = CARTESIAN_POINT('',(-3.384688128857,3.591405172654,1.550486596563+ ));+#264 = CARTESIAN_POINT('',(-3.384688128857,0.,1.550486596563));+#265 = CARTESIAN_POINT('',(-3.384688128857,-3.591405172654,+ 1.550486596563));+#266 = CARTESIAN_POINT('',(-3.384688128857,-3.798122216451,+ 1.550486596563));+#267 = DEFINITIONAL_REPRESENTATION('',(#268),#274);+#268 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#269,#270,#271,#272,#273),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#269 = CARTESIAN_POINT('',(6.769376257657,6.762417602665));+#270 = CARTESIAN_POINT('',(5.077032193241,6.748177938903));+#271 = CARTESIAN_POINT('',(3.384688128862,6.733938275142));+#272 = CARTESIAN_POINT('',(1.69234406446,6.71969861138));+#273 = CARTESIAN_POINT('',(4.437694211983E-11,6.705458947618));+#274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#275 = ORIENTED_EDGE('',*,*,#276,.T.);+#276 = EDGE_CURVE('',#237,#277,#279,.T.);+#277 = VERTEX_POINT('',#278);+#278 = CARTESIAN_POINT('',(3.327729473809,-3.327729473809,1.6));+#279 = SURFACE_CURVE('',#280,(#286,#293),.PCURVE_S1.);+#280 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#281,#282,#283,#284,#285),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#281 = CARTESIAN_POINT('',(-3.798122216451,-3.327729473809,1.6));+#282 = CARTESIAN_POINT('',(-3.591405172654,-3.327729473809,1.6));+#283 = CARTESIAN_POINT('',(-4.440892098501E-16,-3.327729473809,1.6));+#284 = CARTESIAN_POINT('',(3.591405172654,-3.327729473809,1.6));+#285 = CARTESIAN_POINT('',(3.798122216451,-3.327729473809,1.6));+#286 = PCURVE('',#72,#287);+#287 = DEFINITIONAL_REPRESENTATION('',(#288),#292);+#288 = LINE('',#289,#290);+#289 = CARTESIAN_POINT('',(6.769376257714,0.));+#290 = VECTOR('',#291,1.);+#291 = DIRECTION('',(0.,1.));+#292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#293 = PCURVE('',#294,#299);+#294 = PLANE('',#295);+#295 = AXIS2_PLACEMENT_3D('',#296,#297,#298);+#296 = CARTESIAN_POINT('',(-3.377729473809,-3.377729473809,1.6));+#297 = DIRECTION('',(0.,0.,-1.));+#298 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#299 = DEFINITIONAL_REPRESENTATION('',(#300),#306);+#300 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#301,#302,#303,#304,#305),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#301 = CARTESIAN_POINT('',(-0.261907220024,-0.332617898143));+#302 = CARTESIAN_POINT('',(-0.115736196569,-0.186446874687));+#303 = CARTESIAN_POINT('',(2.423770755003,2.353060076885));+#304 = CARTESIAN_POINT('',(4.963277706575,4.892567028457));+#305 = CARTESIAN_POINT('',(5.109448730031,5.038738051912));+#306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#307 = ORIENTED_EDGE('',*,*,#308,.F.);+#308 = EDGE_CURVE('',#24,#277,#309,.T.);+#309 = SURFACE_CURVE('',#310,(#316,#325),.PCURVE_S1.);+#310 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#311,#312,#313,#314,#315),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#311 = CARTESIAN_POINT('',(3.384688128857,-3.384688128857,1.550486596563+ ));+#312 = CARTESIAN_POINT('',(3.370448465095,-3.370448465095,1.562864947422+ ));+#313 = CARTESIAN_POINT('',(3.356208801334,-3.356208801334,1.575243298281+ ));+#314 = CARTESIAN_POINT('',(3.341969137571,-3.341969137571,1.587621649141+ ));+#315 = CARTESIAN_POINT('',(3.327729473809,-3.327729473809,1.6));+#316 = PCURVE('',#72,#317);+#317 = DEFINITIONAL_REPRESENTATION('',(#318),#324);+#318 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#319,#320,#321,#322,#323),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#319 = CARTESIAN_POINT('',(0.,6.762417602666));+#320 = CARTESIAN_POINT('',(1.692344064395,6.748177938904));+#321 = CARTESIAN_POINT('',(3.38468812874,6.733938275143));+#322 = CARTESIAN_POINT('',(5.077032193319,6.71969861138));+#323 = CARTESIAN_POINT('',(6.769376257714,6.705458947618));+#324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#325 = PCURVE('',#189,#326);+#326 = DEFINITIONAL_REPRESENTATION('',(#327),#333);+#327 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#328,#329,#330,#331,#332),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#328 = CARTESIAN_POINT('',(6.876610432772E-11,-6.958655047415E-03));+#329 = CARTESIAN_POINT('',(1.692344064463,7.281008714303E-03));+#330 = CARTESIAN_POINT('',(3.384688128907,2.152067247643E-02));+#331 = CARTESIAN_POINT('',(5.077032193117,3.57603362366E-02));+#332 = CARTESIAN_POINT('',(6.769376257512,4.999999999832E-02));+#333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#334 = ORIENTED_EDGE('',*,*,#55,.F.);+#335 = ADVANCED_FACE('',(#336),#130,.T.);+#336 = FACE_BOUND('',#337,.T.);+#337 = EDGE_LOOP('',(#338,#367,#387,#388));+#338 = ORIENTED_EDGE('',*,*,#339,.T.);+#339 = EDGE_CURVE('',#340,#342,#344,.T.);+#340 = VERTEX_POINT('',#341);+#341 = CARTESIAN_POINT('',(-3.411459274137,-3.411459274137,0.1));+#342 = VERTEX_POINT('',#343);+#343 = CARTESIAN_POINT('',(3.411459274137,-3.411459274137,0.1));+#344 = SURFACE_CURVE('',#345,(#349,#355),.PCURVE_S1.);+#345 = LINE('',#346,#347);+#346 = CARTESIAN_POINT('',(-3.411459274137,-3.411459274137,0.1));+#347 = VECTOR('',#348,1.);+#348 = DIRECTION('',(1.,0.,0.));+#349 = PCURVE('',#130,#350);+#350 = DEFINITIONAL_REPRESENTATION('',(#351),#354);+#351 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#352,#353),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,6.822918548275),.PIECEWISE_BEZIER_KNOTS.);+#352 = CARTESIAN_POINT('',(0.,0.));+#353 = CARTESIAN_POINT('',(7.,0.));+#354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#355 = PCURVE('',#356,#361);+#356 = PLANE('',#357);+#357 = AXIS2_PLACEMENT_3D('',#358,#359,#360);+#358 = CARTESIAN_POINT('',(-3.411459274137,-3.411459274137,0.1));+#359 = DIRECTION('',(0.,0.,-1.));+#360 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#361 = DEFINITIONAL_REPRESENTATION('',(#362),#366);+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(0.,0.));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(0.707106781187,0.707106781187));+#366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#367 = ORIENTED_EDGE('',*,*,#368,.T.);+#368 = EDGE_CURVE('',#342,#22,#369,.T.);+#369 = SURFACE_CURVE('',#370,(#373,#380),.PCURVE_S1.);+#370 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#371,#372),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#371 = CARTESIAN_POINT('',(3.411459274137,-3.411459274137,0.1));+#372 = CARTESIAN_POINT('',(3.5,-3.5,0.73));+#373 = PCURVE('',#130,#374);+#374 = DEFINITIONAL_REPRESENTATION('',(#375),#379);+#375 = LINE('',#376,#377);+#376 = CARTESIAN_POINT('',(7.,0.));+#377 = VECTOR('',#378,1.);+#378 = DIRECTION('',(0.,1.));+#379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#380 = PCURVE('',#221,#381);+#381 = DEFINITIONAL_REPRESENTATION('',(#382),#386);+#382 = LINE('',#383,#384);+#383 = CARTESIAN_POINT('',(0.,0.));+#384 = VECTOR('',#385,1.);+#385 = DIRECTION('',(0.,1.));+#386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#387 = ORIENTED_EDGE('',*,*,#117,.F.);+#388 = ORIENTED_EDGE('',*,*,#389,.F.);+#389 = EDGE_CURVE('',#340,#91,#390,.T.);+#390 = SURFACE_CURVE('',#391,(#394,#401),.PCURVE_S1.);+#391 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#392,#393),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#392 = CARTESIAN_POINT('',(-3.411459274137,-3.411459274137,0.1));+#393 = CARTESIAN_POINT('',(-3.5,-3.5,0.73));+#394 = PCURVE('',#130,#395);+#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,0.));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(0.,1.));+#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#401 = PCURVE('',#402,#407);+#402 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#403,#404)+ ,(#405,#406)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#403 = CARTESIAN_POINT('',(-3.411459274137,3.411459274137,0.1));+#404 = CARTESIAN_POINT('',(-3.5,3.5,0.73));+#405 = CARTESIAN_POINT('',(-3.411459274137,-3.411459274137,0.1));+#406 = CARTESIAN_POINT('',(-3.5,-3.5,0.73));+#407 = DEFINITIONAL_REPRESENTATION('',(#408),#412);+#408 = LINE('',#409,#410);+#409 = CARTESIAN_POINT('',(7.,0.));+#410 = VECTOR('',#411,1.);+#411 = DIRECTION('',(0.,1.));+#412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#413 = ADVANCED_FACE('',(#414),#105,.T.);+#414 = FACE_BOUND('',#415,.T.);+#415 = EDGE_LOOP('',(#416,#417,#441,#463));+#416 = ORIENTED_EDGE('',*,*,#90,.T.);+#417 = ORIENTED_EDGE('',*,*,#418,.F.);+#418 = EDGE_CURVE('',#419,#56,#421,.T.);+#419 = VERTEX_POINT('',#420);+#420 = CARTESIAN_POINT('',(-3.384688128857,3.384688128857,1.550486596563+ ));+#421 = SURFACE_CURVE('',#422,(#428,#434),.PCURVE_S1.);+#422 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#423,#424,#425,#426,#427),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#423 = CARTESIAN_POINT('',(-3.384688128857,3.798122216451,1.550486596563+ ));+#424 = CARTESIAN_POINT('',(-3.384688128857,3.591405172654,1.550486596563+ ));+#425 = CARTESIAN_POINT('',(-3.384688128857,0.,1.550486596563));+#426 = CARTESIAN_POINT('',(-3.384688128857,-3.591405172654,+ 1.550486596563));+#427 = CARTESIAN_POINT('',(-3.384688128857,-3.798122216451,+ 1.550486596563));+#428 = PCURVE('',#105,#429);+#429 = DEFINITIONAL_REPRESENTATION('',(#430),#433);+#430 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#431,#432),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-6.958655047993E-03,6.762417602666),.PIECEWISE_BEZIER_KNOTS.);+#431 = CARTESIAN_POINT('',(0.,0.943088042026));+#432 = CARTESIAN_POINT('',(7.,0.943088042026));+#433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#434 = PCURVE('',#256,#435);+#435 = DEFINITIONAL_REPRESENTATION('',(#436),#440);+#436 = LINE('',#437,#438);+#437 = CARTESIAN_POINT('',(6.769376257714,0.));+#438 = VECTOR('',#439,1.);+#439 = DIRECTION('',(0.,1.));+#440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#441 = ORIENTED_EDGE('',*,*,#442,.F.);+#442 = EDGE_CURVE('',#443,#419,#445,.T.);+#443 = VERTEX_POINT('',#444);+#444 = CARTESIAN_POINT('',(-3.5,3.5,0.73));+#445 = SURFACE_CURVE('',#446,(#449,#456),.PCURVE_S1.);+#446 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#447,#448),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#447 = CARTESIAN_POINT('',(-3.5,3.5,0.73));+#448 = CARTESIAN_POINT('',(-3.377729473809,3.377729473809,1.6));+#449 = PCURVE('',#105,#450);+#450 = DEFINITIONAL_REPRESENTATION('',(#451),#455);+#451 = LINE('',#452,#453);+#452 = CARTESIAN_POINT('',(0.,0.));+#453 = VECTOR('',#454,1.);+#454 = DIRECTION('',(0.,1.));+#455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#456 = PCURVE('',#162,#457);+#457 = DEFINITIONAL_REPRESENTATION('',(#458),#462);+#458 = LINE('',#459,#460);+#459 = CARTESIAN_POINT('',(7.,0.));+#460 = VECTOR('',#461,1.);+#461 = DIRECTION('',(0.,1.));+#462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#463 = ORIENTED_EDGE('',*,*,#464,.T.);+#464 = EDGE_CURVE('',#443,#91,#465,.T.);+#465 = SURFACE_CURVE('',#466,(#470,#476),.PCURVE_S1.);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(-3.5,3.5,0.73));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(0.,-1.,0.));+#470 = PCURVE('',#105,#471);+#471 = DEFINITIONAL_REPRESENTATION('',(#472),#475);+#472 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#473,#474),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,7.),.PIECEWISE_BEZIER_KNOTS.);+#473 = CARTESIAN_POINT('',(0.,0.));+#474 = CARTESIAN_POINT('',(7.,0.));+#475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#476 = PCURVE('',#402,#477);+#477 = DEFINITIONAL_REPRESENTATION('',(#478),#482);+#478 = LINE('',#479,#480);+#479 = CARTESIAN_POINT('',(0.,1.));+#480 = VECTOR('',#481,1.);+#481 = DIRECTION('',(1.,0.));+#482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#483 = ADVANCED_FACE('',(#484),#162,.T.);+#484 = FACE_BOUND('',#485,.T.);+#485 = EDGE_LOOP('',(#486,#487,#520,#521));+#486 = ORIENTED_EDGE('',*,*,#442,.T.);+#487 = ORIENTED_EDGE('',*,*,#488,.F.);+#488 = EDGE_CURVE('',#148,#419,#489,.T.);+#489 = SURFACE_CURVE('',#490,(#496,#502),.PCURVE_S1.);+#490 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#491,#492,#493,#494,#495),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#491 = CARTESIAN_POINT('',(3.798122216451,3.384688128857,1.550486596563)+ );+#492 = CARTESIAN_POINT('',(3.591405172654,3.384688128857,1.550486596563)+ );+#493 = CARTESIAN_POINT('',(0.,3.384688128857,1.550486596563));+#494 = CARTESIAN_POINT('',(-3.591405172654,3.384688128857,1.550486596563+ ));+#495 = CARTESIAN_POINT('',(-3.798122216451,3.384688128857,1.550486596563+ ));+#496 = PCURVE('',#162,#497);+#497 = DEFINITIONAL_REPRESENTATION('',(#498),#501);+#498 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#499,#500),.UNSPECIFIED.,.F.,.F.,+ (2,2),(-6.958655047993E-03,6.762417602666),.PIECEWISE_BEZIER_KNOTS.);+#499 = CARTESIAN_POINT('',(0.,0.943088042026));+#500 = CARTESIAN_POINT('',(7.,0.943088042026));+#501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#502 = PCURVE('',#503,#514);+#503 = B_SPLINE_SURFACE_WITH_KNOTS('',1,2,(+ (#504,#505,#506,#507,#508)+ ,(#509,#510,#511,#512,#513+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(3,1,1,3),(0.,6.769376257714),(+ -0.420392742642,-6.958655047993E-03,6.762417602666,7.17585169026),+ .UNSPECIFIED.);+#504 = CARTESIAN_POINT('',(3.798122216451,3.327729473809,1.6));+#505 = CARTESIAN_POINT('',(3.591405172654,3.327729473809,1.6));+#506 = CARTESIAN_POINT('',(0.,3.327729473809,1.6));+#507 = CARTESIAN_POINT('',(-3.591405172654,3.327729473809,1.6));+#508 = CARTESIAN_POINT('',(-3.798122216451,3.327729473809,1.6));+#509 = CARTESIAN_POINT('',(3.798122216451,3.384688128857,1.550486596563)+ );+#510 = CARTESIAN_POINT('',(3.591405172654,3.384688128857,1.550486596563)+ );+#511 = CARTESIAN_POINT('',(0.,3.384688128857,1.550486596563));+#512 = CARTESIAN_POINT('',(-3.591405172654,3.384688128857,1.550486596563+ ));+#513 = CARTESIAN_POINT('',(-3.798122216451,3.384688128857,1.550486596563+ ));+#514 = DEFINITIONAL_REPRESENTATION('',(#515),#519);+#515 = LINE('',#516,#517);+#516 = CARTESIAN_POINT('',(6.769376257714,0.));+#517 = VECTOR('',#518,1.);+#518 = DIRECTION('',(0.,1.));+#519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#520 = ORIENTED_EDGE('',*,*,#145,.F.);+#521 = ORIENTED_EDGE('',*,*,#522,.T.);+#522 = EDGE_CURVE('',#146,#443,#523,.T.);+#523 = SURFACE_CURVE('',#524,(#528,#534),.PCURVE_S1.);+#524 = LINE('',#525,#526);+#525 = CARTESIAN_POINT('',(3.5,3.5,0.73));+#526 = VECTOR('',#527,1.);+#527 = DIRECTION('',(-1.,0.,0.));+#528 = PCURVE('',#162,#529);+#529 = DEFINITIONAL_REPRESENTATION('',(#530),#533);+#530 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#531,#532),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,7.),.PIECEWISE_BEZIER_KNOTS.);+#531 = CARTESIAN_POINT('',(0.,0.));+#532 = CARTESIAN_POINT('',(7.,0.));+#533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#534 = PCURVE('',#535,#540);+#535 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#536,#537)+ ,(#538,#539)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#536 = CARTESIAN_POINT('',(3.411459274137,3.411459274137,0.1));+#537 = CARTESIAN_POINT('',(3.5,3.5,0.73));+#538 = CARTESIAN_POINT('',(-3.411459274137,3.411459274137,0.1));+#539 = CARTESIAN_POINT('',(-3.5,3.5,0.73));+#540 = DEFINITIONAL_REPRESENTATION('',(#541),#545);+#541 = LINE('',#542,#543);+#542 = CARTESIAN_POINT('',(0.,1.));+#543 = VECTOR('',#544,1.);+#544 = DIRECTION('',(1.,0.));+#545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#546 = ADVANCED_FACE('',(#547),#189,.F.);+#547 = FACE_BOUND('',#548,.F.);+#548 = EDGE_LOOP('',(#549,#550,#577,#604));+#549 = ORIENTED_EDGE('',*,*,#308,.T.);+#550 = ORIENTED_EDGE('',*,*,#551,.T.);+#551 = EDGE_CURVE('',#277,#552,#554,.T.);+#552 = VERTEX_POINT('',#553);+#553 = CARTESIAN_POINT('',(3.327729473809,3.327729473809,1.6));+#554 = SURFACE_CURVE('',#555,(#561,#568),.PCURVE_S1.);+#555 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#556,#557,#558,#559,#560),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#556 = CARTESIAN_POINT('',(3.327729473809,-3.798122216451,1.6));+#557 = CARTESIAN_POINT('',(3.327729473809,-3.591405172654,1.6));+#558 = CARTESIAN_POINT('',(3.327729473809,-8.881784197001E-16,1.6));+#559 = CARTESIAN_POINT('',(3.327729473809,3.591405172654,1.6));+#560 = CARTESIAN_POINT('',(3.327729473809,3.798122216451,1.6));+#561 = PCURVE('',#189,#562);+#562 = DEFINITIONAL_REPRESENTATION('',(#563),#567);+#563 = LINE('',#564,#565);+#564 = CARTESIAN_POINT('',(6.769376257714,0.));+#565 = VECTOR('',#566,1.);+#566 = DIRECTION('',(0.,1.));+#567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#568 = PCURVE('',#294,#569);+#569 = DEFINITIONAL_REPRESENTATION('',(#570),#576);+#570 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#571,#572,#573,#574,#575),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#571 = CARTESIAN_POINT('',(4.444212933745,5.038738051912));+#572 = CARTESIAN_POINT('',(4.590383957201,4.892567028457));+#573 = CARTESIAN_POINT('',(7.129890908773,2.353060076885));+#574 = CARTESIAN_POINT('',(9.669397860345,-0.186446874687));+#575 = CARTESIAN_POINT('',(9.8155688838,-0.332617898143));+#576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#577 = ORIENTED_EDGE('',*,*,#578,.F.);+#578 = EDGE_CURVE('',#148,#552,#579,.T.);+#579 = SURFACE_CURVE('',#580,(#586,#595),.PCURVE_S1.);+#580 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#581,#582,#583,#584,#585),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#581 = CARTESIAN_POINT('',(3.384688128857,3.384688128857,1.550486596563)+ );+#582 = CARTESIAN_POINT('',(3.370448465095,3.370448465095,1.562864947422)+ );+#583 = CARTESIAN_POINT('',(3.356208801334,3.356208801334,1.57524329828)+ );+#584 = CARTESIAN_POINT('',(3.341969137571,3.341969137571,1.587621649141)+ );+#585 = CARTESIAN_POINT('',(3.327729473809,3.327729473809,1.6));+#586 = PCURVE('',#189,#587);+#587 = DEFINITIONAL_REPRESENTATION('',(#588),#594);+#588 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#589,#590,#591,#592,#593),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#589 = CARTESIAN_POINT('',(0.,6.762417602666));+#590 = CARTESIAN_POINT('',(1.692344064395,6.748177938904));+#591 = CARTESIAN_POINT('',(3.384688128673,6.733938275143));+#592 = CARTESIAN_POINT('',(5.077032193319,6.71969861138));+#593 = CARTESIAN_POINT('',(6.769376257714,6.705458947618));+#594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#595 = PCURVE('',#503,#596);+#596 = DEFINITIONAL_REPRESENTATION('',(#597),#603);+#597 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#598,#599,#600,#601,#602),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#598 = CARTESIAN_POINT('',(6.769376257684,-6.95865504774E-03));+#599 = CARTESIAN_POINT('',(5.077032193289,7.281008713977E-03));+#600 = CARTESIAN_POINT('',(3.384688128778,2.152067247668E-02));+#601 = CARTESIAN_POINT('',(1.692344064635,3.576033623627E-02));+#602 = CARTESIAN_POINT('',(2.406896747898E-10,4.999999999799E-02));+#603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#604 = ORIENTED_EDGE('',*,*,#174,.F.);+#605 = ADVANCED_FACE('',(#606),#221,.T.);+#606 = FACE_BOUND('',#607,.T.);+#607 = EDGE_LOOP('',(#608,#630,#650,#651));+#608 = ORIENTED_EDGE('',*,*,#609,.T.);+#609 = EDGE_CURVE('',#342,#610,#612,.T.);+#610 = VERTEX_POINT('',#611);+#611 = CARTESIAN_POINT('',(3.411459274137,3.411459274137,0.1));+#612 = SURFACE_CURVE('',#613,(#617,#623),.PCURVE_S1.);+#613 = LINE('',#614,#615);+#614 = CARTESIAN_POINT('',(3.411459274137,-3.411459274137,0.1));+#615 = VECTOR('',#616,1.);+#616 = DIRECTION('',(0.,1.,0.));+#617 = PCURVE('',#221,#618);+#618 = DEFINITIONAL_REPRESENTATION('',(#619),#622);+#619 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#620,#621),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,6.822918548275),.PIECEWISE_BEZIER_KNOTS.);+#620 = CARTESIAN_POINT('',(0.,0.));+#621 = CARTESIAN_POINT('',(7.,0.));+#622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#623 = PCURVE('',#356,#624);+#624 = DEFINITIONAL_REPRESENTATION('',(#625),#629);+#625 = LINE('',#626,#627);+#626 = CARTESIAN_POINT('',(4.824531972968,4.824531972968));+#627 = VECTOR('',#628,1.);+#628 = DIRECTION('',(0.707106781187,-0.707106781187));+#629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#630 = ORIENTED_EDGE('',*,*,#631,.T.);+#631 = EDGE_CURVE('',#610,#146,#632,.T.);+#632 = SURFACE_CURVE('',#633,(#636,#643),.PCURVE_S1.);+#633 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#634,#635),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#634 = CARTESIAN_POINT('',(3.411459274137,3.411459274137,0.1));+#635 = CARTESIAN_POINT('',(3.5,3.5,0.73));+#636 = PCURVE('',#221,#637);+#637 = DEFINITIONAL_REPRESENTATION('',(#638),#642);+#638 = LINE('',#639,#640);+#639 = CARTESIAN_POINT('',(7.,0.));+#640 = VECTOR('',#641,1.);+#641 = DIRECTION('',(0.,1.));+#642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#643 = PCURVE('',#535,#644);+#644 = DEFINITIONAL_REPRESENTATION('',(#645),#649);+#645 = LINE('',#646,#647);+#646 = CARTESIAN_POINT('',(0.,0.));+#647 = VECTOR('',#648,1.);+#648 = DIRECTION('',(0.,1.));+#649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#650 = ORIENTED_EDGE('',*,*,#208,.F.);+#651 = ORIENTED_EDGE('',*,*,#368,.F.);+#652 = ADVANCED_FACE('',(#653),#256,.T.);+#653 = FACE_BOUND('',#654,.T.);+#654 = EDGE_LOOP('',(#655,#684,#685,#686));+#655 = ORIENTED_EDGE('',*,*,#656,.T.);+#656 = EDGE_CURVE('',#657,#419,#659,.T.);+#657 = VERTEX_POINT('',#658);+#658 = CARTESIAN_POINT('',(-3.327729473809,3.327729473809,1.6));+#659 = SURFACE_CURVE('',#660,(#666,#675),.PCURVE_S1.);+#660 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#661,#662,#663,#664,#665),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#661 = CARTESIAN_POINT('',(-3.327729473809,3.327729473809,1.6));+#662 = CARTESIAN_POINT('',(-3.341969137571,3.341969137571,1.587621649141+ ));+#663 = CARTESIAN_POINT('',(-3.356208801334,3.356208801334,1.575243298281+ ));+#664 = CARTESIAN_POINT('',(-3.370448465095,3.370448465095,1.562864947422+ ));+#665 = CARTESIAN_POINT('',(-3.384688128857,3.384688128857,1.550486596563+ ));+#666 = PCURVE('',#256,#667);+#667 = DEFINITIONAL_REPRESENTATION('',(#668),#674);+#668 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#669,#670,#671,#672,#673),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#669 = CARTESIAN_POINT('',(2.007316534976E-10,4.999999999833E-02));+#670 = CARTESIAN_POINT('',(1.692344064595,3.576033623661E-02));+#671 = CARTESIAN_POINT('',(3.384688128808,2.152067247642E-02));+#672 = CARTESIAN_POINT('',(5.077032193249,7.281008714314E-03));+#673 = CARTESIAN_POINT('',(6.769376257644,-6.958655047404E-03));+#674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#675 = PCURVE('',#503,#676);+#676 = DEFINITIONAL_REPRESENTATION('',(#677),#683);+#677 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#678,#679,#680,#681,#682),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#678 = CARTESIAN_POINT('',(0.,6.705458947618));+#679 = CARTESIAN_POINT('',(1.692344064395,6.71969861138));+#680 = CARTESIAN_POINT('',(3.384688128971,6.733938275143));+#681 = CARTESIAN_POINT('',(5.077032193319,6.748177938904));+#682 = CARTESIAN_POINT('',(6.769376257714,6.762417602666));+#683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#684 = ORIENTED_EDGE('',*,*,#418,.T.);+#685 = ORIENTED_EDGE('',*,*,#236,.T.);+#686 = ORIENTED_EDGE('',*,*,#687,.F.);+#687 = EDGE_CURVE('',#657,#237,#688,.T.);+#688 = SURFACE_CURVE('',#689,(#695,#702),.PCURVE_S1.);+#689 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#690,#691,#692,#693,#694),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#690 = CARTESIAN_POINT('',(-3.327729473809,3.798122216451,1.6));+#691 = CARTESIAN_POINT('',(-3.327729473809,3.591405172654,1.6));+#692 = CARTESIAN_POINT('',(-3.327729473809,-4.440892098501E-16,1.6));+#693 = CARTESIAN_POINT('',(-3.327729473809,-3.591405172654,1.6));+#694 = CARTESIAN_POINT('',(-3.327729473809,-3.798122216451,1.6));+#695 = PCURVE('',#256,#696);+#696 = DEFINITIONAL_REPRESENTATION('',(#697),#701);+#697 = LINE('',#698,#699);+#698 = CARTESIAN_POINT('',(0.,0.));+#699 = VECTOR('',#700,1.);+#700 = DIRECTION('',(0.,1.));+#701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#702 = PCURVE('',#294,#703);+#703 = DEFINITIONAL_REPRESENTATION('',(#704),#710);+#704 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#705,#706,#707,#708,#709),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#705 = CARTESIAN_POINT('',(5.109448730031,-5.038738051912));+#706 = CARTESIAN_POINT('',(4.963277706575,-4.892567028457));+#707 = CARTESIAN_POINT('',(2.423770755003,-2.353060076885));+#708 = CARTESIAN_POINT('',(-0.115736196569,0.186446874687));+#709 = CARTESIAN_POINT('',(-0.261907220024,0.332617898143));+#710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#711 = ADVANCED_FACE('',(#712,#742),#294,.F.);+#712 = FACE_BOUND('',#713,.F.);+#713 = EDGE_LOOP('',(#714,#715,#716,#741));+#714 = ORIENTED_EDGE('',*,*,#276,.F.);+#715 = ORIENTED_EDGE('',*,*,#687,.F.);+#716 = ORIENTED_EDGE('',*,*,#717,.F.);+#717 = EDGE_CURVE('',#552,#657,#718,.T.);+#718 = SURFACE_CURVE('',#719,(#725,#734),.PCURVE_S1.);+#719 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#720,#721,#722,#723,#724),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#720 = CARTESIAN_POINT('',(3.798122216451,3.327729473809,1.6));+#721 = CARTESIAN_POINT('',(3.591405172654,3.327729473809,1.6));+#722 = CARTESIAN_POINT('',(0.,3.327729473809,1.6));+#723 = CARTESIAN_POINT('',(-3.591405172654,3.327729473809,1.6));+#724 = CARTESIAN_POINT('',(-3.798122216451,3.327729473809,1.6));+#725 = PCURVE('',#294,#726);+#726 = DEFINITIONAL_REPRESENTATION('',(#727),#733);+#727 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#728,#729,#730,#731,#732),+ .UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.420392742642,-6.958655047993E-03,+ 6.762417602666,7.17585169026),.UNSPECIFIED.);+#728 = CARTESIAN_POINT('',(9.8155688838,0.332617898143));+#729 = CARTESIAN_POINT('',(9.669397860345,0.186446874687));+#730 = CARTESIAN_POINT('',(7.129890908773,-2.353060076885));+#731 = CARTESIAN_POINT('',(4.590383957201,-4.892567028457));+#732 = CARTESIAN_POINT('',(4.444212933745,-5.038738051912));+#733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#734 = PCURVE('',#503,#735);+#735 = DEFINITIONAL_REPRESENTATION('',(#736),#740);+#736 = LINE('',#737,#738);+#737 = CARTESIAN_POINT('',(0.,0.));+#738 = VECTOR('',#739,1.);+#739 = DIRECTION('',(0.,1.));+#740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#741 = ORIENTED_EDGE('',*,*,#551,.F.);+#742 = FACE_BOUND('',#743,.F.);+#743 = EDGE_LOOP('',(#744));+#744 = ORIENTED_EDGE('',*,*,#745,.F.);+#745 = EDGE_CURVE('',#746,#746,#748,.T.);+#746 = VERTEX_POINT('',#747);+#747 = CARTESIAN_POINT('',(-2.257729473809,-2.607729473809,1.6));+#748 = SURFACE_CURVE('',#749,(#754,#761),.PCURVE_S1.);+#749 = CIRCLE('',#750,0.35);+#750 = AXIS2_PLACEMENT_3D('',#751,#752,#753);+#751 = CARTESIAN_POINT('',(-2.607729473809,-2.607729473809,1.6));+#752 = DIRECTION('',(0.,0.,-1.));+#753 = DIRECTION('',(1.,0.,0.));+#754 = PCURVE('',#294,#755);+#755 = DEFINITIONAL_REPRESENTATION('',(#756),#760);+#756 = CIRCLE('',#757,0.35);+#757 = AXIS2_PLACEMENT_2D('',#758,#759);+#758 = CARTESIAN_POINT('',(1.088944443027,0.));+#759 = DIRECTION('',(0.707106781187,0.707106781187));+#760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#761 = PCURVE('',#762,#767);+#762 = CYLINDRICAL_SURFACE('',#763,0.35);+#763 = AXIS2_PLACEMENT_3D('',#764,#765,#766);+#764 = CARTESIAN_POINT('',(-2.607729473809,-2.607729473809,1.55));+#765 = DIRECTION('',(-0.,-0.,-1.));+#766 = DIRECTION('',(1.,0.,0.));+#767 = DEFINITIONAL_REPRESENTATION('',(#768),#772);+#768 = LINE('',#769,#770);+#769 = CARTESIAN_POINT('',(-4.138911435803E-13,-5.E-02));+#770 = VECTOR('',#771,1.);+#771 = DIRECTION('',(1.,-0.));+#772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#773 = ADVANCED_FACE('',(#774),#356,.T.);+#774 = FACE_BOUND('',#775,.F.);+#775 = EDGE_LOOP('',(#776,#777,#778,#800));+#776 = ORIENTED_EDGE('',*,*,#339,.T.);+#777 = ORIENTED_EDGE('',*,*,#609,.T.);+#778 = ORIENTED_EDGE('',*,*,#779,.T.);+#779 = EDGE_CURVE('',#610,#780,#782,.T.);+#780 = VERTEX_POINT('',#781);+#781 = CARTESIAN_POINT('',(-3.411459274137,3.411459274137,0.1));+#782 = SURFACE_CURVE('',#783,(#787,#794),.PCURVE_S1.);+#783 = LINE('',#784,#785);+#784 = CARTESIAN_POINT('',(3.411459274137,3.411459274137,0.1));+#785 = VECTOR('',#786,1.);+#786 = DIRECTION('',(-1.,0.,0.));+#787 = PCURVE('',#356,#788);+#788 = DEFINITIONAL_REPRESENTATION('',(#789),#793);+#789 = LINE('',#790,#791);+#790 = CARTESIAN_POINT('',(9.649063945936,0.));+#791 = VECTOR('',#792,1.);+#792 = DIRECTION('',(-0.707106781187,-0.707106781187));+#793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#794 = PCURVE('',#535,#795);+#795 = DEFINITIONAL_REPRESENTATION('',(#796),#799);+#796 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#797,#798),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,6.822918548275),.PIECEWISE_BEZIER_KNOTS.);+#797 = CARTESIAN_POINT('',(0.,0.));+#798 = CARTESIAN_POINT('',(7.,0.));+#799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#800 = ORIENTED_EDGE('',*,*,#801,.T.);+#801 = EDGE_CURVE('',#780,#340,#802,.T.);+#802 = SURFACE_CURVE('',#803,(#807,#814),.PCURVE_S1.);+#803 = LINE('',#804,#805);+#804 = CARTESIAN_POINT('',(-3.411459274137,3.411459274137,0.1));+#805 = VECTOR('',#806,1.);+#806 = DIRECTION('',(0.,-1.,0.));+#807 = PCURVE('',#356,#808);+#808 = DEFINITIONAL_REPRESENTATION('',(#809),#813);+#809 = LINE('',#810,#811);+#810 = CARTESIAN_POINT('',(4.824531972968,-4.824531972968));+#811 = VECTOR('',#812,1.);+#812 = DIRECTION('',(-0.707106781187,0.707106781187));+#813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#814 = PCURVE('',#402,#815);+#815 = DEFINITIONAL_REPRESENTATION('',(#816),#819);+#816 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#817,#818),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,6.822918548275),.PIECEWISE_BEZIER_KNOTS.);+#817 = CARTESIAN_POINT('',(0.,0.));+#818 = CARTESIAN_POINT('',(7.,0.));+#819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#820 = ADVANCED_FACE('',(#821),#402,.T.);+#821 = FACE_BOUND('',#822,.T.);+#822 = EDGE_LOOP('',(#823,#824,#825,#826));+#823 = ORIENTED_EDGE('',*,*,#801,.T.);+#824 = ORIENTED_EDGE('',*,*,#389,.T.);+#825 = ORIENTED_EDGE('',*,*,#464,.F.);+#826 = ORIENTED_EDGE('',*,*,#827,.F.);+#827 = EDGE_CURVE('',#780,#443,#828,.T.);+#828 = SURFACE_CURVE('',#829,(#832,#839),.PCURVE_S1.);+#829 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#830,#831),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#830 = CARTESIAN_POINT('',(-3.411459274137,3.411459274137,0.1));+#831 = CARTESIAN_POINT('',(-3.5,3.5,0.73));+#832 = PCURVE('',#402,#833);+#833 = DEFINITIONAL_REPRESENTATION('',(#834),#838);+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(0.,0.));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(0.,1.));+#838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#839 = PCURVE('',#535,#840);+#840 = DEFINITIONAL_REPRESENTATION('',(#841),#845);+#841 = LINE('',#842,#843);+#842 = CARTESIAN_POINT('',(7.,0.));+#843 = VECTOR('',#844,1.);+#844 = DIRECTION('',(0.,1.));+#845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#846 = ADVANCED_FACE('',(#847),#503,.T.);+#847 = FACE_BOUND('',#848,.T.);+#848 = EDGE_LOOP('',(#849,#850,#851,#852));+#849 = ORIENTED_EDGE('',*,*,#578,.F.);+#850 = ORIENTED_EDGE('',*,*,#488,.T.);+#851 = ORIENTED_EDGE('',*,*,#656,.F.);+#852 = ORIENTED_EDGE('',*,*,#717,.F.);+#853 = ADVANCED_FACE('',(#854),#535,.T.);+#854 = FACE_BOUND('',#855,.T.);+#855 = EDGE_LOOP('',(#856,#857,#858,#859));+#856 = ORIENTED_EDGE('',*,*,#779,.T.);+#857 = ORIENTED_EDGE('',*,*,#827,.T.);+#858 = ORIENTED_EDGE('',*,*,#522,.F.);+#859 = ORIENTED_EDGE('',*,*,#631,.F.);+#860 = ADVANCED_FACE('',(#861),#762,.F.);+#861 = FACE_BOUND('',#862,.F.);+#862 = EDGE_LOOP('',(#863,#886,#887,#888));+#863 = ORIENTED_EDGE('',*,*,#864,.T.);+#864 = EDGE_CURVE('',#865,#746,#867,.T.);+#865 = VERTEX_POINT('',#866);+#866 = CARTESIAN_POINT('',(-2.257729473809,-2.607729473809,1.55));+#867 = SEAM_CURVE('',#868,(#872,#879),.PCURVE_S1.);+#868 = LINE('',#869,#870);+#869 = CARTESIAN_POINT('',(-2.257729473809,-2.607729473809,1.55));+#870 = VECTOR('',#871,1.);+#871 = DIRECTION('',(0.,0.,1.));+#872 = PCURVE('',#762,#873);+#873 = DEFINITIONAL_REPRESENTATION('',(#874),#878);+#874 = LINE('',#875,#876);+#875 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#876 = VECTOR('',#877,1.);+#877 = DIRECTION('',(-0.,-1.));+#878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#879 = PCURVE('',#762,#880);+#880 = DEFINITIONAL_REPRESENTATION('',(#881),#885);+#881 = LINE('',#882,#883);+#882 = CARTESIAN_POINT('',(6.28318530718,0.));+#883 = VECTOR('',#884,1.);+#884 = DIRECTION('',(-0.,-1.));+#885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#886 = ORIENTED_EDGE('',*,*,#745,.T.);+#887 = ORIENTED_EDGE('',*,*,#864,.F.);+#888 = ORIENTED_EDGE('',*,*,#889,.T.);+#889 = EDGE_CURVE('',#865,#865,#890,.T.);+#890 = SURFACE_CURVE('',#891,(#896,#903),.PCURVE_S1.);+#891 = CIRCLE('',#892,0.35);+#892 = AXIS2_PLACEMENT_3D('',#893,#894,#895);+#893 = CARTESIAN_POINT('',(-2.607729473809,-2.607729473809,1.55));+#894 = DIRECTION('',(0.,0.,1.));+#895 = DIRECTION('',(1.,0.,0.));+#896 = PCURVE('',#762,#897);+#897 = DEFINITIONAL_REPRESENTATION('',(#898),#902);+#898 = LINE('',#899,#900);+#899 = CARTESIAN_POINT('',(6.28318530718,0.));+#900 = VECTOR('',#901,1.);+#901 = DIRECTION('',(-1.,0.));+#902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#903 = PCURVE('',#904,#909);+#904 = PLANE('',#905);+#905 = AXIS2_PLACEMENT_3D('',#906,#907,#908);+#906 = CARTESIAN_POINT('',(-2.607729473809,-2.607729473809,1.55));+#907 = DIRECTION('',(0.,0.,1.));+#908 = DIRECTION('',(1.,0.,0.));+#909 = DEFINITIONAL_REPRESENTATION('',(#910),#914);+#910 = CIRCLE('',#911,0.35);+#911 = AXIS2_PLACEMENT_2D('',#912,#913);+#912 = CARTESIAN_POINT('',(0.,0.));+#913 = DIRECTION('',(1.,0.));+#914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#915 = ADVANCED_FACE('',(#916),#904,.T.);+#916 = FACE_BOUND('',#917,.T.);+#917 = EDGE_LOOP('',(#918));+#918 = ORIENTED_EDGE('',*,*,#889,.T.);+#919 = MANIFOLD_SOLID_BREP('',#920);+#920 = CLOSED_SHELL('',(#921,#1051,#1127,#1465,#1514,#1780,#1807,#1834,+ #1861,#1888,#1915,#1942,#1969,#1996,#2023,#2050));+#921 = ADVANCED_FACE('',(#922),#937,.T.);+#922 = FACE_BOUND('',#923,.T.);+#923 = EDGE_LOOP('',(#924,#964,#992,#1025));+#924 = ORIENTED_EDGE('',*,*,#925,.T.);+#925 = EDGE_CURVE('',#926,#928,#930,.T.);+#926 = VERTEX_POINT('',#927);+#927 = CARTESIAN_POINT('',(-2.66,-3.25,0.7825));+#928 = VERTEX_POINT('',#929);+#929 = CARTESIAN_POINT('',(-2.66,-3.2,0.746007810594));+#930 = SURFACE_CURVE('',#931,(#936,#948),.PCURVE_S1.);+#931 = CIRCLE('',#932,5.25E-02);+#932 = AXIS2_PLACEMENT_3D('',#933,#934,#935);+#933 = CARTESIAN_POINT('',(-2.66,-3.25,0.73));+#934 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#935 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#936 = PCURVE('',#937,#942);+#937 = CYLINDRICAL_SURFACE('',#938,5.25E-02);+#938 = AXIS2_PLACEMENT_3D('',#939,#940,#941);+#939 = CARTESIAN_POINT('',(-2.75,-3.25,0.73));+#940 = DIRECTION('',(1.,1.110223024625E-16,0.));+#941 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#942 = DEFINITIONAL_REPRESENTATION('',(#943),#947);+#943 = LINE('',#944,#945);+#944 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#945 = VECTOR('',#946,1.);+#946 = DIRECTION('',(-1.,-0.));+#947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#948 = PCURVE('',#949,#954);+#949 = PLANE('',#950);+#950 = AXIS2_PLACEMENT_3D('',#951,#952,#953);+#951 = CARTESIAN_POINT('',(-2.66,-3.861815252728,0.337140815196));+#952 = DIRECTION('',(1.,1.110223024625E-16,0.));+#953 = DIRECTION('',(0.,0.,1.));+#954 = DEFINITIONAL_REPRESENTATION('',(#955),#963);+#955 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#956,#957,#958,#959,#960,#961+,#962),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#956 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#957 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#958 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#959 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#960 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#961 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#962 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#964 = ORIENTED_EDGE('',*,*,#965,.F.);+#965 = EDGE_CURVE('',#966,#928,#968,.T.);+#966 = VERTEX_POINT('',#967);+#967 = CARTESIAN_POINT('',(-2.84,-3.2,0.746007810594));+#968 = SURFACE_CURVE('',#969,(#973,#980),.PCURVE_S1.);+#969 = LINE('',#970,#971);+#970 = CARTESIAN_POINT('',(-2.75,-3.2,0.746007810594));+#971 = VECTOR('',#972,1.);+#972 = DIRECTION('',(1.,1.110223024625E-16,0.));+#973 = PCURVE('',#937,#974);+#974 = DEFINITIONAL_REPRESENTATION('',(#975),#979);+#975 = LINE('',#976,#977);+#976 = CARTESIAN_POINT('',(3.451437293332,0.));+#977 = VECTOR('',#978,1.);+#978 = DIRECTION('',(-0.,1.));+#979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#980 = PCURVE('',#981,#986);+#981 = PLANE('',#982);+#982 = AXIS2_PLACEMENT_3D('',#983,#984,#985);+#983 = CARTESIAN_POINT('',(-3.34,-3.2,-0.5));+#984 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#985 = DIRECTION('',(0.,0.,1.));+#986 = DEFINITIONAL_REPRESENTATION('',(#987),#991);+#987 = LINE('',#988,#989);+#988 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#989 = VECTOR('',#990,1.);+#990 = DIRECTION('',(0.,-1.));+#991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#992 = ORIENTED_EDGE('',*,*,#993,.F.);+#993 = EDGE_CURVE('',#994,#966,#996,.T.);+#994 = VERTEX_POINT('',#995);+#995 = CARTESIAN_POINT('',(-2.84,-3.25,0.7825));+#996 = SURFACE_CURVE('',#997,(#1002,#1009),.PCURVE_S1.);+#997 = CIRCLE('',#998,5.25E-02);+#998 = AXIS2_PLACEMENT_3D('',#999,#1000,#1001);+#999 = CARTESIAN_POINT('',(-2.84,-3.25,0.73));+#1000 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1001 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1002 = PCURVE('',#937,#1003);+#1003 = DEFINITIONAL_REPRESENTATION('',(#1004),#1008);+#1004 = LINE('',#1005,#1006);+#1005 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#1006 = VECTOR('',#1007,1.);+#1007 = DIRECTION('',(-1.,0.));+#1008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1009 = PCURVE('',#1010,#1015);+#1010 = PLANE('',#1011);+#1011 = AXIS2_PLACEMENT_3D('',#1012,#1013,#1014);+#1012 = CARTESIAN_POINT('',(-2.84,-3.861815252728,0.337140815196));+#1013 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1014 = DIRECTION('',(0.,0.,1.));+#1015 = DEFINITIONAL_REPRESENTATION('',(#1016),#1024);+#1016 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1017,#1018,#1019,#1020,+#1021,#1022,#1023),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1017 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#1018 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#1019 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#1020 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#1021 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#1022 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#1023 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#1024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1025 = ORIENTED_EDGE('',*,*,#1026,.T.);+#1026 = EDGE_CURVE('',#994,#926,#1027,.T.);+#1027 = SURFACE_CURVE('',#1028,(#1032,#1039),.PCURVE_S1.);+#1028 = LINE('',#1029,#1030);+#1029 = CARTESIAN_POINT('',(-2.84,-3.25,0.7825));+#1030 = VECTOR('',#1031,1.);+#1031 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1032 = PCURVE('',#937,#1033);+#1033 = DEFINITIONAL_REPRESENTATION('',(#1034),#1038);+#1034 = LINE('',#1035,#1036);+#1035 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#1036 = VECTOR('',#1037,1.);+#1037 = DIRECTION('',(0.,1.));+#1038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1039 = PCURVE('',#1040,#1045);+#1040 = PLANE('',#1041);+#1041 = AXIS2_PLACEMENT_3D('',#1042,#1043,#1044);+#1042 = CARTESIAN_POINT('',(-2.75,-3.25,0.7825));+#1043 = DIRECTION('',(0.,0.,1.));+#1044 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1045 = DEFINITIONAL_REPRESENTATION('',(#1046),#1050);+#1046 = LINE('',#1047,#1048);+#1047 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#1048 = VECTOR('',#1049,1.);+#1049 = DIRECTION('',(0.,1.));+#1050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1051 = ADVANCED_FACE('',(#1052),#1040,.T.);+#1052 = FACE_BOUND('',#1053,.T.);+#1053 = EDGE_LOOP('',(#1054,#1055,#1078,#1106));+#1054 = ORIENTED_EDGE('',*,*,#1026,.F.);+#1055 = ORIENTED_EDGE('',*,*,#1056,.T.);+#1056 = EDGE_CURVE('',#994,#1057,#1059,.T.);+#1057 = VERTEX_POINT('',#1058);+#1058 = CARTESIAN_POINT('',(-2.84,-3.52308092439,0.7825));+#1059 = SURFACE_CURVE('',#1060,(#1064,#1071),.PCURVE_S1.);+#1060 = LINE('',#1061,#1062);+#1061 = CARTESIAN_POINT('',(-2.84,-3.25,0.7825));+#1062 = VECTOR('',#1063,1.);+#1063 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1064 = PCURVE('',#1040,#1065);+#1065 = DEFINITIONAL_REPRESENTATION('',(#1066),#1070);+#1066 = LINE('',#1067,#1068);+#1067 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#1068 = VECTOR('',#1069,1.);+#1069 = DIRECTION('',(1.,0.));+#1070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1071 = PCURVE('',#1010,#1072);+#1072 = DEFINITIONAL_REPRESENTATION('',(#1073),#1077);+#1073 = LINE('',#1074,#1075);+#1074 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#1075 = VECTOR('',#1076,1.);+#1076 = DIRECTION('',(0.,1.));+#1077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1078 = ORIENTED_EDGE('',*,*,#1079,.T.);+#1079 = EDGE_CURVE('',#1057,#1080,#1082,.T.);+#1080 = VERTEX_POINT('',#1081);+#1081 = CARTESIAN_POINT('',(-2.66,-3.52308092439,0.7825));+#1082 = SURFACE_CURVE('',#1083,(#1087,#1094),.PCURVE_S1.);+#1083 = LINE('',#1084,#1085);+#1084 = CARTESIAN_POINT('',(-2.84,-3.52308092439,0.7825));+#1085 = VECTOR('',#1086,1.);+#1086 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1087 = PCURVE('',#1040,#1088);+#1088 = DEFINITIONAL_REPRESENTATION('',(#1089),#1093);+#1089 = LINE('',#1090,#1091);+#1090 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#1091 = VECTOR('',#1092,1.);+#1092 = DIRECTION('',(0.,1.));+#1093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1094 = PCURVE('',#1095,#1100);+#1095 = CYLINDRICAL_SURFACE('',#1096,0.147);+#1096 = AXIS2_PLACEMENT_3D('',#1097,#1098,#1099);+#1097 = CARTESIAN_POINT('',(-2.75,-3.52308092439,0.6355));+#1098 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1099 = DIRECTION('',(0.,0.,1.));+#1100 = DEFINITIONAL_REPRESENTATION('',(#1101),#1105);+#1101 = LINE('',#1102,#1103);+#1102 = CARTESIAN_POINT('',(0.,-9.E-02));+#1103 = VECTOR('',#1104,1.);+#1104 = DIRECTION('',(-0.,1.));+#1105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1106 = ORIENTED_EDGE('',*,*,#1107,.F.);+#1107 = EDGE_CURVE('',#926,#1080,#1108,.T.);+#1108 = SURFACE_CURVE('',#1109,(#1113,#1120),.PCURVE_S1.);+#1109 = LINE('',#1110,#1111);+#1110 = CARTESIAN_POINT('',(-2.66,-3.25,0.7825));+#1111 = VECTOR('',#1112,1.);+#1112 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1113 = PCURVE('',#1040,#1114);+#1114 = DEFINITIONAL_REPRESENTATION('',(#1115),#1119);+#1115 = LINE('',#1116,#1117);+#1116 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#1117 = VECTOR('',#1118,1.);+#1118 = DIRECTION('',(1.,0.));+#1119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1120 = PCURVE('',#949,#1121);+#1121 = DEFINITIONAL_REPRESENTATION('',(#1122),#1126);+#1122 = LINE('',#1123,#1124);+#1123 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#1124 = VECTOR('',#1125,1.);+#1125 = DIRECTION('',(0.,1.));+#1126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1127 = ADVANCED_FACE('',(#1128),#949,.T.);+#1128 = FACE_BOUND('',#1129,.T.);+#1129 = EDGE_LOOP('',(#1130,#1131,#1132,#1156,#1184,#1213,#1241,#1269,+ #1297,#1326,#1354,#1383,#1411,#1444));+#1130 = ORIENTED_EDGE('',*,*,#925,.F.);+#1131 = ORIENTED_EDGE('',*,*,#1107,.T.);+#1132 = ORIENTED_EDGE('',*,*,#1133,.T.);+#1133 = EDGE_CURVE('',#1080,#1134,#1136,.T.);+#1134 = VERTEX_POINT('',#1135);+#1135 = CARTESIAN_POINT('',(-2.66,-3.653021649751,0.704234328342));+#1136 = SURFACE_CURVE('',#1137,(#1142,#1149),.PCURVE_S1.);+#1137 = CIRCLE('',#1138,0.147);+#1138 = AXIS2_PLACEMENT_3D('',#1139,#1140,#1141);+#1139 = CARTESIAN_POINT('',(-2.66,-3.52308092439,0.6355));+#1140 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1141 = DIRECTION('',(0.,0.,1.));+#1142 = PCURVE('',#949,#1143);+#1143 = DEFINITIONAL_REPRESENTATION('',(#1144),#1148);+#1144 = CIRCLE('',#1145,0.147);+#1145 = AXIS2_PLACEMENT_2D('',#1146,#1147);+#1146 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#1147 = DIRECTION('',(1.,0.));+#1148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1149 = PCURVE('',#1095,#1150);+#1150 = DEFINITIONAL_REPRESENTATION('',(#1151),#1155);+#1151 = LINE('',#1152,#1153);+#1152 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#1153 = VECTOR('',#1154,1.);+#1154 = DIRECTION('',(1.,-0.));+#1155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1156 = ORIENTED_EDGE('',*,*,#1157,.T.);+#1157 = EDGE_CURVE('',#1134,#1158,#1160,.T.);+#1158 = VERTEX_POINT('',#1159);+#1159 = CARTESIAN_POINT('',(-2.66,-3.958168154079,0.127361620474));+#1160 = SURFACE_CURVE('',#1161,(#1165,#1172),.PCURVE_S1.);+#1161 = LINE('',#1162,#1163);+#1162 = CARTESIAN_POINT('',(-2.66,-3.626407401915,0.754547974408));+#1163 = VECTOR('',#1164,1.);+#1164 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#1165 = PCURVE('',#949,#1166);+#1166 = DEFINITIONAL_REPRESENTATION('',(#1167),#1171);+#1167 = LINE('',#1168,#1169);+#1168 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#1169 = VECTOR('',#1170,1.);+#1170 = DIRECTION('',(-0.883950512662,0.467580464908));+#1171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1172 = PCURVE('',#1173,#1178);+#1173 = PLANE('',#1174);+#1174 = AXIS2_PLACEMENT_3D('',#1175,#1176,#1177);+#1175 = CARTESIAN_POINT('',(-2.75,-3.653021649751,0.704234328342));+#1176 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#1177 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#1178 = DEFINITIONAL_REPRESENTATION('',(#1179),#1183);+#1179 = LINE('',#1180,#1181);+#1180 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#1181 = VECTOR('',#1182,1.);+#1182 = DIRECTION('',(1.,-2.399596746007E-32));+#1183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1184 = ORIENTED_EDGE('',*,*,#1185,.F.);+#1185 = EDGE_CURVE('',#1186,#1158,#1188,.T.);+#1186 = VERTEX_POINT('',#1187);+#1187 = CARTESIAN_POINT('',(-2.66,-3.99529407561,0.105));+#1188 = SURFACE_CURVE('',#1189,(#1194,#1201),.PCURVE_S1.);+#1189 = CIRCLE('',#1190,4.2E-02);+#1190 = AXIS2_PLACEMENT_3D('',#1191,#1192,#1193);+#1191 = CARTESIAN_POINT('',(-2.66,-3.99529407561,0.147));+#1192 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1193 = DIRECTION('',(0.,0.,1.));+#1194 = PCURVE('',#949,#1195);+#1195 = DEFINITIONAL_REPRESENTATION('',(#1196),#1200);+#1196 = CIRCLE('',#1197,4.2E-02);+#1197 = AXIS2_PLACEMENT_2D('',#1198,#1199);+#1198 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#1199 = DIRECTION('',(1.,0.));+#1200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1201 = PCURVE('',#1202,#1207);+#1202 = CYLINDRICAL_SURFACE('',#1203,4.2E-02);+#1203 = AXIS2_PLACEMENT_3D('',#1204,#1205,#1206);+#1204 = CARTESIAN_POINT('',(-2.75,-3.99529407561,0.147));+#1205 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1206 = DIRECTION('',(0.,0.,1.));+#1207 = DEFINITIONAL_REPRESENTATION('',(#1208),#1212);+#1208 = LINE('',#1209,#1210);+#1209 = CARTESIAN_POINT('',(-0.,9.E-02));+#1210 = VECTOR('',#1211,1.);+#1211 = DIRECTION('',(1.,-0.));+#1212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1213 = ORIENTED_EDGE('',*,*,#1214,.T.);+#1214 = EDGE_CURVE('',#1186,#1215,#1217,.T.);+#1215 = VERTEX_POINT('',#1216);+#1216 = CARTESIAN_POINT('',(-2.66,-4.43,0.105));+#1217 = SURFACE_CURVE('',#1218,(#1222,#1229),.PCURVE_S1.);+#1218 = LINE('',#1219,#1220);+#1219 = CARTESIAN_POINT('',(-2.66,-3.938375,0.105));+#1220 = VECTOR('',#1221,1.);+#1221 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1222 = PCURVE('',#949,#1223);+#1223 = DEFINITIONAL_REPRESENTATION('',(#1224),#1228);+#1224 = LINE('',#1225,#1226);+#1225 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#1226 = VECTOR('',#1227,1.);+#1227 = DIRECTION('',(0.,1.));+#1228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1229 = PCURVE('',#1230,#1235);+#1230 = PLANE('',#1231);+#1231 = AXIS2_PLACEMENT_3D('',#1232,#1233,#1234);+#1232 = CARTESIAN_POINT('',(-2.75,-3.99529407561,0.105));+#1233 = DIRECTION('',(0.,0.,1.));+#1234 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1235 = DEFINITIONAL_REPRESENTATION('',(#1236),#1240);+#1236 = LINE('',#1237,#1238);+#1237 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#1238 = VECTOR('',#1239,1.);+#1239 = DIRECTION('',(1.,0.));+#1240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1241 = ORIENTED_EDGE('',*,*,#1242,.T.);+#1242 = EDGE_CURVE('',#1215,#1243,#1245,.T.);+#1243 = VERTEX_POINT('',#1244);+#1244 = CARTESIAN_POINT('',(-2.66,-4.43,0.));+#1245 = SURFACE_CURVE('',#1246,(#1250,#1257),.PCURVE_S1.);+#1246 = LINE('',#1247,#1248);+#1247 = CARTESIAN_POINT('',(-2.66,-4.43,-8.142959240193E-02));+#1248 = VECTOR('',#1249,1.);+#1249 = DIRECTION('',(0.,0.,-1.));+#1250 = PCURVE('',#949,#1251);+#1251 = DEFINITIONAL_REPRESENTATION('',(#1252),#1256);+#1252 = LINE('',#1253,#1254);+#1253 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#1254 = VECTOR('',#1255,1.);+#1255 = DIRECTION('',(-1.,0.));+#1256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1257 = PCURVE('',#1258,#1263);+#1258 = PLANE('',#1259);+#1259 = AXIS2_PLACEMENT_3D('',#1260,#1261,#1262);+#1260 = CARTESIAN_POINT('',(-3.34,-4.43,-0.5));+#1261 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1262 = DIRECTION('',(0.,0.,1.));+#1263 = DEFINITIONAL_REPRESENTATION('',(#1264),#1268);+#1264 = LINE('',#1265,#1266);+#1265 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#1266 = VECTOR('',#1267,1.);+#1267 = DIRECTION('',(-1.,-0.));+#1268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1269 = ORIENTED_EDGE('',*,*,#1270,.F.);+#1270 = EDGE_CURVE('',#1271,#1243,#1273,.T.);+#1271 = VERTEX_POINT('',#1272);+#1272 = CARTESIAN_POINT('',(-2.66,-3.99529407561,0.));+#1273 = SURFACE_CURVE('',#1274,(#1278,#1285),.PCURVE_S1.);+#1274 = LINE('',#1275,#1276);+#1275 = CARTESIAN_POINT('',(-2.66,-3.938375,0.));+#1276 = VECTOR('',#1277,1.);+#1277 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1278 = PCURVE('',#949,#1279);+#1279 = DEFINITIONAL_REPRESENTATION('',(#1280),#1284);+#1280 = LINE('',#1281,#1282);+#1281 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#1282 = VECTOR('',#1283,1.);+#1283 = DIRECTION('',(0.,1.));+#1284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1285 = PCURVE('',#1286,#1291);+#1286 = PLANE('',#1287);+#1287 = AXIS2_PLACEMENT_3D('',#1288,#1289,#1290);+#1288 = CARTESIAN_POINT('',(-2.75,-3.99529407561,0.));+#1289 = DIRECTION('',(0.,0.,1.));+#1290 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1291 = DEFINITIONAL_REPRESENTATION('',(#1292),#1296);+#1292 = LINE('',#1293,#1294);+#1293 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#1294 = VECTOR('',#1295,1.);+#1295 = DIRECTION('',(1.,0.));+#1296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1297 = ORIENTED_EDGE('',*,*,#1298,.T.);+#1298 = EDGE_CURVE('',#1271,#1299,#1301,.T.);+#1299 = VERTEX_POINT('',#1300);+#1300 = CARTESIAN_POINT('',(-2.66,-3.865353350249,7.826567165848E-02));+#1301 = SURFACE_CURVE('',#1302,(#1307,#1314),.PCURVE_S1.);+#1302 = CIRCLE('',#1303,0.147);+#1303 = AXIS2_PLACEMENT_3D('',#1304,#1305,#1306);+#1304 = CARTESIAN_POINT('',(-2.66,-3.99529407561,0.147));+#1305 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1306 = DIRECTION('',(0.,0.,1.));+#1307 = PCURVE('',#949,#1308);+#1308 = DEFINITIONAL_REPRESENTATION('',(#1309),#1313);+#1309 = CIRCLE('',#1310,0.147);+#1310 = AXIS2_PLACEMENT_2D('',#1311,#1312);+#1311 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#1312 = DIRECTION('',(1.,0.));+#1313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1314 = PCURVE('',#1315,#1320);+#1315 = CYLINDRICAL_SURFACE('',#1316,0.147);+#1316 = AXIS2_PLACEMENT_3D('',#1317,#1318,#1319);+#1317 = CARTESIAN_POINT('',(-2.75,-3.99529407561,0.147));+#1318 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1319 = DIRECTION('',(0.,0.,1.));+#1320 = DEFINITIONAL_REPRESENTATION('',(#1321),#1325);+#1321 = LINE('',#1322,#1323);+#1322 = CARTESIAN_POINT('',(-0.,9.E-02));+#1323 = VECTOR('',#1324,1.);+#1324 = DIRECTION('',(1.,-0.));+#1325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1326 = ORIENTED_EDGE('',*,*,#1327,.F.);+#1327 = EDGE_CURVE('',#1328,#1299,#1330,.T.);+#1328 = VERTEX_POINT('',#1329);+#1329 = CARTESIAN_POINT('',(-2.66,-3.560206845921,0.655138379526));+#1330 = SURFACE_CURVE('',#1331,(#1335,#1342),.PCURVE_S1.);+#1331 = LINE('',#1332,#1333);+#1332 = CARTESIAN_POINT('',(-2.66,-3.533592598085,0.705452025592));+#1333 = VECTOR('',#1334,1.);+#1334 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#1335 = PCURVE('',#949,#1336);+#1336 = DEFINITIONAL_REPRESENTATION('',(#1337),#1341);+#1337 = LINE('',#1338,#1339);+#1338 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#1339 = VECTOR('',#1340,1.);+#1340 = DIRECTION('',(-0.883950512662,0.467580464908));+#1341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1342 = PCURVE('',#1343,#1348);+#1343 = PLANE('',#1344);+#1344 = AXIS2_PLACEMENT_3D('',#1345,#1346,#1347);+#1345 = CARTESIAN_POINT('',(-2.75,-3.560206845921,0.655138379526));+#1346 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#1347 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#1348 = DEFINITIONAL_REPRESENTATION('',(#1349),#1353);+#1349 = LINE('',#1350,#1351);+#1350 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#1351 = VECTOR('',#1352,1.);+#1352 = DIRECTION('',(1.,-2.399596746007E-32));+#1353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1354 = ORIENTED_EDGE('',*,*,#1355,.F.);+#1355 = EDGE_CURVE('',#1356,#1328,#1358,.T.);+#1356 = VERTEX_POINT('',#1357);+#1357 = CARTESIAN_POINT('',(-2.66,-3.52308092439,0.6775));+#1358 = SURFACE_CURVE('',#1359,(#1364,#1371),.PCURVE_S1.);+#1359 = CIRCLE('',#1360,4.2E-02);+#1360 = AXIS2_PLACEMENT_3D('',#1361,#1362,#1363);+#1361 = CARTESIAN_POINT('',(-2.66,-3.52308092439,0.6355));+#1362 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1363 = DIRECTION('',(0.,0.,1.));+#1364 = PCURVE('',#949,#1365);+#1365 = DEFINITIONAL_REPRESENTATION('',(#1366),#1370);+#1366 = CIRCLE('',#1367,4.2E-02);+#1367 = AXIS2_PLACEMENT_2D('',#1368,#1369);+#1368 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#1369 = DIRECTION('',(1.,0.));+#1370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1371 = PCURVE('',#1372,#1377);+#1372 = CYLINDRICAL_SURFACE('',#1373,4.2E-02);+#1373 = AXIS2_PLACEMENT_3D('',#1374,#1375,#1376);+#1374 = CARTESIAN_POINT('',(-2.75,-3.52308092439,0.6355));+#1375 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1376 = DIRECTION('',(0.,0.,1.));+#1377 = DEFINITIONAL_REPRESENTATION('',(#1378),#1382);+#1378 = LINE('',#1379,#1380);+#1379 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#1380 = VECTOR('',#1381,1.);+#1381 = DIRECTION('',(1.,-0.));+#1382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1383 = ORIENTED_EDGE('',*,*,#1384,.F.);+#1384 = EDGE_CURVE('',#1385,#1356,#1387,.T.);+#1385 = VERTEX_POINT('',#1386);+#1386 = CARTESIAN_POINT('',(-2.66,-3.25,0.6775));+#1387 = SURFACE_CURVE('',#1388,(#1392,#1399),.PCURVE_S1.);+#1388 = LINE('',#1389,#1390);+#1389 = CARTESIAN_POINT('',(-2.66,-3.25,0.6775));+#1390 = VECTOR('',#1391,1.);+#1391 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1392 = PCURVE('',#949,#1393);+#1393 = DEFINITIONAL_REPRESENTATION('',(#1394),#1398);+#1394 = LINE('',#1395,#1396);+#1395 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#1396 = VECTOR('',#1397,1.);+#1397 = DIRECTION('',(0.,1.));+#1398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1399 = PCURVE('',#1400,#1405);+#1400 = PLANE('',#1401);+#1401 = AXIS2_PLACEMENT_3D('',#1402,#1403,#1404);+#1402 = CARTESIAN_POINT('',(-2.75,-3.25,0.6775));+#1403 = DIRECTION('',(0.,0.,1.));+#1404 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1405 = DEFINITIONAL_REPRESENTATION('',(#1406),#1410);+#1406 = LINE('',#1407,#1408);+#1407 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#1408 = VECTOR('',#1409,1.);+#1409 = DIRECTION('',(1.,0.));+#1410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1411 = ORIENTED_EDGE('',*,*,#1412,.F.);+#1412 = EDGE_CURVE('',#1413,#1385,#1415,.T.);+#1413 = VERTEX_POINT('',#1414);+#1414 = CARTESIAN_POINT('',(-2.66,-3.2,0.713992189406));+#1415 = SURFACE_CURVE('',#1416,(#1421,#1432),.PCURVE_S1.);+#1416 = CIRCLE('',#1417,5.25E-02);+#1417 = AXIS2_PLACEMENT_3D('',#1418,#1419,#1420);+#1418 = CARTESIAN_POINT('',(-2.66,-3.25,0.73));+#1419 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1420 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1421 = PCURVE('',#949,#1422);+#1422 = DEFINITIONAL_REPRESENTATION('',(#1423),#1431);+#1423 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1424,#1425,#1426,#1427,+#1428,#1429,#1430),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1424 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#1425 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#1426 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#1427 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#1428 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#1429 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#1430 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#1431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1432 = PCURVE('',#1433,#1438);+#1433 = CYLINDRICAL_SURFACE('',#1434,5.25E-02);+#1434 = AXIS2_PLACEMENT_3D('',#1435,#1436,#1437);+#1435 = CARTESIAN_POINT('',(-2.75,-3.25,0.73));+#1436 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1437 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1438 = DEFINITIONAL_REPRESENTATION('',(#1439),#1443);+#1439 = LINE('',#1440,#1441);+#1440 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#1441 = VECTOR('',#1442,1.);+#1442 = DIRECTION('',(-1.,-0.));+#1443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1444 = ORIENTED_EDGE('',*,*,#1445,.F.);+#1445 = EDGE_CURVE('',#928,#1413,#1446,.T.);+#1446 = SURFACE_CURVE('',#1447,(#1451,#1458),.PCURVE_S1.);+#1447 = LINE('',#1448,#1449);+#1448 = CARTESIAN_POINT('',(-2.66,-3.2,-8.142959240193E-02));+#1449 = VECTOR('',#1450,1.);+#1450 = DIRECTION('',(0.,0.,-1.));+#1451 = PCURVE('',#949,#1452);+#1452 = DEFINITIONAL_REPRESENTATION('',(#1453),#1457);+#1453 = LINE('',#1454,#1455);+#1454 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#1455 = VECTOR('',#1456,1.);+#1456 = DIRECTION('',(-1.,0.));+#1457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1458 = PCURVE('',#981,#1459);+#1459 = DEFINITIONAL_REPRESENTATION('',(#1460),#1464);+#1460 = LINE('',#1461,#1462);+#1461 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#1462 = VECTOR('',#1463,1.);+#1463 = DIRECTION('',(-1.,-0.));+#1464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1465 = ADVANCED_FACE('',(#1466),#981,.F.);+#1466 = FACE_BOUND('',#1467,.F.);+#1467 = EDGE_LOOP('',(#1468,#1469,#1492,#1513));+#1468 = ORIENTED_EDGE('',*,*,#965,.F.);+#1469 = ORIENTED_EDGE('',*,*,#1470,.T.);+#1470 = EDGE_CURVE('',#966,#1471,#1473,.T.);+#1471 = VERTEX_POINT('',#1472);+#1472 = CARTESIAN_POINT('',(-2.84,-3.2,0.713992189406));+#1473 = SURFACE_CURVE('',#1474,(#1478,#1485),.PCURVE_S1.);+#1474 = LINE('',#1475,#1476);+#1475 = CARTESIAN_POINT('',(-2.84,-3.2,-8.142959240193E-02));+#1476 = VECTOR('',#1477,1.);+#1477 = DIRECTION('',(0.,0.,-1.));+#1478 = PCURVE('',#981,#1479);+#1479 = DEFINITIONAL_REPRESENTATION('',(#1480),#1484);+#1480 = LINE('',#1481,#1482);+#1481 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#1482 = VECTOR('',#1483,1.);+#1483 = DIRECTION('',(-1.,-0.));+#1484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1485 = PCURVE('',#1010,#1486);+#1486 = DEFINITIONAL_REPRESENTATION('',(#1487),#1491);+#1487 = LINE('',#1488,#1489);+#1488 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#1489 = VECTOR('',#1490,1.);+#1490 = DIRECTION('',(-1.,0.));+#1491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1492 = ORIENTED_EDGE('',*,*,#1493,.T.);+#1493 = EDGE_CURVE('',#1471,#1413,#1494,.T.);+#1494 = SURFACE_CURVE('',#1495,(#1499,#1506),.PCURVE_S1.);+#1495 = LINE('',#1496,#1497);+#1496 = CARTESIAN_POINT('',(-2.75,-3.2,0.713992189406));+#1497 = VECTOR('',#1498,1.);+#1498 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1499 = PCURVE('',#981,#1500);+#1500 = DEFINITIONAL_REPRESENTATION('',(#1501),#1505);+#1501 = LINE('',#1502,#1503);+#1502 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#1503 = VECTOR('',#1504,1.);+#1504 = DIRECTION('',(0.,-1.));+#1505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1506 = PCURVE('',#1433,#1507);+#1507 = DEFINITIONAL_REPRESENTATION('',(#1508),#1512);+#1508 = LINE('',#1509,#1510);+#1509 = CARTESIAN_POINT('',(2.831748013849,0.));+#1510 = VECTOR('',#1511,1.);+#1511 = DIRECTION('',(-0.,1.));+#1512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1513 = ORIENTED_EDGE('',*,*,#1445,.F.);+#1514 = ADVANCED_FACE('',(#1515),#1010,.F.);+#1515 = FACE_BOUND('',#1516,.F.);+#1516 = EDGE_LOOP('',(#1517,#1518,#1519,#1543,#1566,#1590,#1613,#1636,+ #1659,#1683,#1706,#1730,#1753,#1779));+#1517 = ORIENTED_EDGE('',*,*,#993,.F.);+#1518 = ORIENTED_EDGE('',*,*,#1056,.T.);+#1519 = ORIENTED_EDGE('',*,*,#1520,.T.);+#1520 = EDGE_CURVE('',#1057,#1521,#1523,.T.);+#1521 = VERTEX_POINT('',#1522);+#1522 = CARTESIAN_POINT('',(-2.84,-3.653021649751,0.704234328342));+#1523 = SURFACE_CURVE('',#1524,(#1529,#1536),.PCURVE_S1.);+#1524 = CIRCLE('',#1525,0.147);+#1525 = AXIS2_PLACEMENT_3D('',#1526,#1527,#1528);+#1526 = CARTESIAN_POINT('',(-2.84,-3.52308092439,0.6355));+#1527 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1528 = DIRECTION('',(0.,0.,1.));+#1529 = PCURVE('',#1010,#1530);+#1530 = DEFINITIONAL_REPRESENTATION('',(#1531),#1535);+#1531 = CIRCLE('',#1532,0.147);+#1532 = AXIS2_PLACEMENT_2D('',#1533,#1534);+#1533 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#1534 = DIRECTION('',(1.,0.));+#1535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1536 = PCURVE('',#1095,#1537);+#1537 = DEFINITIONAL_REPRESENTATION('',(#1538),#1542);+#1538 = LINE('',#1539,#1540);+#1539 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#1540 = VECTOR('',#1541,1.);+#1541 = DIRECTION('',(1.,0.));+#1542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1543 = ORIENTED_EDGE('',*,*,#1544,.T.);+#1544 = EDGE_CURVE('',#1521,#1545,#1547,.T.);+#1545 = VERTEX_POINT('',#1546);+#1546 = CARTESIAN_POINT('',(-2.84,-3.958168154079,0.127361620474));+#1547 = SURFACE_CURVE('',#1548,(#1552,#1559),.PCURVE_S1.);+#1548 = LINE('',#1549,#1550);+#1549 = CARTESIAN_POINT('',(-2.84,-3.626407401915,0.754547974408));+#1550 = VECTOR('',#1551,1.);+#1551 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#1552 = PCURVE('',#1010,#1553);+#1553 = DEFINITIONAL_REPRESENTATION('',(#1554),#1558);+#1554 = LINE('',#1555,#1556);+#1555 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#1556 = VECTOR('',#1557,1.);+#1557 = DIRECTION('',(-0.883950512662,0.467580464908));+#1558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1559 = PCURVE('',#1173,#1560);+#1560 = DEFINITIONAL_REPRESENTATION('',(#1561),#1565);+#1561 = LINE('',#1562,#1563);+#1562 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#1563 = VECTOR('',#1564,1.);+#1564 = DIRECTION('',(1.,-2.399596746007E-32));+#1565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1566 = ORIENTED_EDGE('',*,*,#1567,.F.);+#1567 = EDGE_CURVE('',#1568,#1545,#1570,.T.);+#1568 = VERTEX_POINT('',#1569);+#1569 = CARTESIAN_POINT('',(-2.84,-3.99529407561,0.105));+#1570 = SURFACE_CURVE('',#1571,(#1576,#1583),.PCURVE_S1.);+#1571 = CIRCLE('',#1572,4.2E-02);+#1572 = AXIS2_PLACEMENT_3D('',#1573,#1574,#1575);+#1573 = CARTESIAN_POINT('',(-2.84,-3.99529407561,0.147));+#1574 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1575 = DIRECTION('',(0.,0.,1.));+#1576 = PCURVE('',#1010,#1577);+#1577 = DEFINITIONAL_REPRESENTATION('',(#1578),#1582);+#1578 = CIRCLE('',#1579,4.2E-02);+#1579 = AXIS2_PLACEMENT_2D('',#1580,#1581);+#1580 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#1581 = DIRECTION('',(1.,0.));+#1582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1583 = PCURVE('',#1202,#1584);+#1584 = DEFINITIONAL_REPRESENTATION('',(#1585),#1589);+#1585 = LINE('',#1586,#1587);+#1586 = CARTESIAN_POINT('',(0.,-9.E-02));+#1587 = VECTOR('',#1588,1.);+#1588 = DIRECTION('',(1.,0.));+#1589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1590 = ORIENTED_EDGE('',*,*,#1591,.T.);+#1591 = EDGE_CURVE('',#1568,#1592,#1594,.T.);+#1592 = VERTEX_POINT('',#1593);+#1593 = CARTESIAN_POINT('',(-2.84,-4.43,0.105));+#1594 = SURFACE_CURVE('',#1595,(#1599,#1606),.PCURVE_S1.);+#1595 = LINE('',#1596,#1597);+#1596 = CARTESIAN_POINT('',(-2.84,-3.938375,0.105));+#1597 = VECTOR('',#1598,1.);+#1598 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1599 = PCURVE('',#1010,#1600);+#1600 = DEFINITIONAL_REPRESENTATION('',(#1601),#1605);+#1601 = LINE('',#1602,#1603);+#1602 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#1603 = VECTOR('',#1604,1.);+#1604 = DIRECTION('',(0.,1.));+#1605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1606 = PCURVE('',#1230,#1607);+#1607 = DEFINITIONAL_REPRESENTATION('',(#1608),#1612);+#1608 = LINE('',#1609,#1610);+#1609 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#1610 = VECTOR('',#1611,1.);+#1611 = DIRECTION('',(1.,0.));+#1612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1613 = ORIENTED_EDGE('',*,*,#1614,.T.);+#1614 = EDGE_CURVE('',#1592,#1615,#1617,.T.);+#1615 = VERTEX_POINT('',#1616);+#1616 = CARTESIAN_POINT('',(-2.84,-4.43,0.));+#1617 = SURFACE_CURVE('',#1618,(#1622,#1629),.PCURVE_S1.);+#1618 = LINE('',#1619,#1620);+#1619 = CARTESIAN_POINT('',(-2.84,-4.43,-8.142959240193E-02));+#1620 = VECTOR('',#1621,1.);+#1621 = DIRECTION('',(0.,0.,-1.));+#1622 = PCURVE('',#1010,#1623);+#1623 = DEFINITIONAL_REPRESENTATION('',(#1624),#1628);+#1624 = LINE('',#1625,#1626);+#1625 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#1626 = VECTOR('',#1627,1.);+#1627 = DIRECTION('',(-1.,0.));+#1628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1629 = PCURVE('',#1258,#1630);+#1630 = DEFINITIONAL_REPRESENTATION('',(#1631),#1635);+#1631 = LINE('',#1632,#1633);+#1632 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#1633 = VECTOR('',#1634,1.);+#1634 = DIRECTION('',(-1.,-0.));+#1635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1636 = ORIENTED_EDGE('',*,*,#1637,.F.);+#1637 = EDGE_CURVE('',#1638,#1615,#1640,.T.);+#1638 = VERTEX_POINT('',#1639);+#1639 = CARTESIAN_POINT('',(-2.84,-3.99529407561,0.));+#1640 = SURFACE_CURVE('',#1641,(#1645,#1652),.PCURVE_S1.);+#1641 = LINE('',#1642,#1643);+#1642 = CARTESIAN_POINT('',(-2.84,-3.938375,0.));+#1643 = VECTOR('',#1644,1.);+#1644 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1645 = PCURVE('',#1010,#1646);+#1646 = DEFINITIONAL_REPRESENTATION('',(#1647),#1651);+#1647 = LINE('',#1648,#1649);+#1648 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#1649 = VECTOR('',#1650,1.);+#1650 = DIRECTION('',(0.,1.));+#1651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1652 = PCURVE('',#1286,#1653);+#1653 = DEFINITIONAL_REPRESENTATION('',(#1654),#1658);+#1654 = LINE('',#1655,#1656);+#1655 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#1656 = VECTOR('',#1657,1.);+#1657 = DIRECTION('',(1.,0.));+#1658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1659 = ORIENTED_EDGE('',*,*,#1660,.T.);+#1660 = EDGE_CURVE('',#1638,#1661,#1663,.T.);+#1661 = VERTEX_POINT('',#1662);+#1662 = CARTESIAN_POINT('',(-2.84,-3.865353350249,7.826567165848E-02));+#1663 = SURFACE_CURVE('',#1664,(#1669,#1676),.PCURVE_S1.);+#1664 = CIRCLE('',#1665,0.147);+#1665 = AXIS2_PLACEMENT_3D('',#1666,#1667,#1668);+#1666 = CARTESIAN_POINT('',(-2.84,-3.99529407561,0.147));+#1667 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1668 = DIRECTION('',(0.,0.,1.));+#1669 = PCURVE('',#1010,#1670);+#1670 = DEFINITIONAL_REPRESENTATION('',(#1671),#1675);+#1671 = CIRCLE('',#1672,0.147);+#1672 = AXIS2_PLACEMENT_2D('',#1673,#1674);+#1673 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#1674 = DIRECTION('',(1.,0.));+#1675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1676 = PCURVE('',#1315,#1677);+#1677 = DEFINITIONAL_REPRESENTATION('',(#1678),#1682);+#1678 = LINE('',#1679,#1680);+#1679 = CARTESIAN_POINT('',(0.,-9.E-02));+#1680 = VECTOR('',#1681,1.);+#1681 = DIRECTION('',(1.,0.));+#1682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1683 = ORIENTED_EDGE('',*,*,#1684,.F.);+#1684 = EDGE_CURVE('',#1685,#1661,#1687,.T.);+#1685 = VERTEX_POINT('',#1686);+#1686 = CARTESIAN_POINT('',(-2.84,-3.560206845921,0.655138379526));+#1687 = SURFACE_CURVE('',#1688,(#1692,#1699),.PCURVE_S1.);+#1688 = LINE('',#1689,#1690);+#1689 = CARTESIAN_POINT('',(-2.84,-3.533592598085,0.705452025592));+#1690 = VECTOR('',#1691,1.);+#1691 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#1692 = PCURVE('',#1010,#1693);+#1693 = DEFINITIONAL_REPRESENTATION('',(#1694),#1698);+#1694 = LINE('',#1695,#1696);+#1695 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#1696 = VECTOR('',#1697,1.);+#1697 = DIRECTION('',(-0.883950512662,0.467580464908));+#1698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1699 = PCURVE('',#1343,#1700);+#1700 = DEFINITIONAL_REPRESENTATION('',(#1701),#1705);+#1701 = LINE('',#1702,#1703);+#1702 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#1703 = VECTOR('',#1704,1.);+#1704 = DIRECTION('',(1.,-2.399596746007E-32));+#1705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1706 = ORIENTED_EDGE('',*,*,#1707,.F.);+#1707 = EDGE_CURVE('',#1708,#1685,#1710,.T.);+#1708 = VERTEX_POINT('',#1709);+#1709 = CARTESIAN_POINT('',(-2.84,-3.52308092439,0.6775));+#1710 = SURFACE_CURVE('',#1711,(#1716,#1723),.PCURVE_S1.);+#1711 = CIRCLE('',#1712,4.2E-02);+#1712 = AXIS2_PLACEMENT_3D('',#1713,#1714,#1715);+#1713 = CARTESIAN_POINT('',(-2.84,-3.52308092439,0.6355));+#1714 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#1715 = DIRECTION('',(0.,0.,1.));+#1716 = PCURVE('',#1010,#1717);+#1717 = DEFINITIONAL_REPRESENTATION('',(#1718),#1722);+#1718 = CIRCLE('',#1719,4.2E-02);+#1719 = AXIS2_PLACEMENT_2D('',#1720,#1721);+#1720 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#1721 = DIRECTION('',(1.,0.));+#1722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1723 = PCURVE('',#1372,#1724);+#1724 = DEFINITIONAL_REPRESENTATION('',(#1725),#1729);+#1725 = LINE('',#1726,#1727);+#1726 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#1727 = VECTOR('',#1728,1.);+#1728 = DIRECTION('',(1.,0.));+#1729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1730 = ORIENTED_EDGE('',*,*,#1731,.F.);+#1731 = EDGE_CURVE('',#1732,#1708,#1734,.T.);+#1732 = VERTEX_POINT('',#1733);+#1733 = CARTESIAN_POINT('',(-2.84,-3.25,0.6775));+#1734 = SURFACE_CURVE('',#1735,(#1739,#1746),.PCURVE_S1.);+#1735 = LINE('',#1736,#1737);+#1736 = CARTESIAN_POINT('',(-2.84,-3.25,0.6775));+#1737 = VECTOR('',#1738,1.);+#1738 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1739 = PCURVE('',#1010,#1740);+#1740 = DEFINITIONAL_REPRESENTATION('',(#1741),#1745);+#1741 = LINE('',#1742,#1743);+#1742 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#1743 = VECTOR('',#1744,1.);+#1744 = DIRECTION('',(0.,1.));+#1745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1746 = PCURVE('',#1400,#1747);+#1747 = DEFINITIONAL_REPRESENTATION('',(#1748),#1752);+#1748 = LINE('',#1749,#1750);+#1749 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#1750 = VECTOR('',#1751,1.);+#1751 = DIRECTION('',(1.,0.));+#1752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1753 = ORIENTED_EDGE('',*,*,#1754,.F.);+#1754 = EDGE_CURVE('',#1471,#1732,#1755,.T.);+#1755 = SURFACE_CURVE('',#1756,(#1761,#1772),.PCURVE_S1.);+#1756 = CIRCLE('',#1757,5.25E-02);+#1757 = AXIS2_PLACEMENT_3D('',#1758,#1759,#1760);+#1758 = CARTESIAN_POINT('',(-2.84,-3.25,0.73));+#1759 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1760 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1761 = PCURVE('',#1010,#1762);+#1762 = DEFINITIONAL_REPRESENTATION('',(#1763),#1771);+#1763 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1764,#1765,#1766,#1767,+#1768,#1769,#1770),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1764 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#1765 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#1766 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#1767 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#1768 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#1769 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#1770 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#1771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1772 = PCURVE('',#1433,#1773);+#1773 = DEFINITIONAL_REPRESENTATION('',(#1774),#1778);+#1774 = LINE('',#1775,#1776);+#1775 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#1776 = VECTOR('',#1777,1.);+#1777 = DIRECTION('',(-1.,0.));+#1778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1779 = ORIENTED_EDGE('',*,*,#1470,.F.);+#1780 = ADVANCED_FACE('',(#1781),#1095,.T.);+#1781 = FACE_BOUND('',#1782,.T.);+#1782 = EDGE_LOOP('',(#1783,#1784,#1785,#1806));+#1783 = ORIENTED_EDGE('',*,*,#1079,.F.);+#1784 = ORIENTED_EDGE('',*,*,#1520,.T.);+#1785 = ORIENTED_EDGE('',*,*,#1786,.T.);+#1786 = EDGE_CURVE('',#1521,#1134,#1787,.T.);+#1787 = SURFACE_CURVE('',#1788,(#1792,#1799),.PCURVE_S1.);+#1788 = LINE('',#1789,#1790);+#1789 = CARTESIAN_POINT('',(-2.84,-3.653021649751,0.704234328342));+#1790 = VECTOR('',#1791,1.);+#1791 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1792 = PCURVE('',#1095,#1793);+#1793 = DEFINITIONAL_REPRESENTATION('',(#1794),#1798);+#1794 = LINE('',#1795,#1796);+#1795 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#1796 = VECTOR('',#1797,1.);+#1797 = DIRECTION('',(-0.,1.));+#1798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1799 = PCURVE('',#1173,#1800);+#1800 = DEFINITIONAL_REPRESENTATION('',(#1801),#1805);+#1801 = LINE('',#1802,#1803);+#1802 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#1803 = VECTOR('',#1804,1.);+#1804 = DIRECTION('',(4.767113258106E-29,1.));+#1805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1806 = ORIENTED_EDGE('',*,*,#1133,.F.);+#1807 = ADVANCED_FACE('',(#1808),#1433,.T.);+#1808 = FACE_BOUND('',#1809,.T.);+#1809 = EDGE_LOOP('',(#1810,#1811,#1832,#1833));+#1810 = ORIENTED_EDGE('',*,*,#1412,.T.);+#1811 = ORIENTED_EDGE('',*,*,#1812,.T.);+#1812 = EDGE_CURVE('',#1385,#1732,#1813,.T.);+#1813 = SURFACE_CURVE('',#1814,(#1818,#1825),.PCURVE_S1.);+#1814 = LINE('',#1815,#1816);+#1815 = CARTESIAN_POINT('',(-2.66,-3.25,0.6775));+#1816 = VECTOR('',#1817,1.);+#1817 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1818 = PCURVE('',#1433,#1819);+#1819 = DEFINITIONAL_REPRESENTATION('',(#1820),#1824);+#1820 = LINE('',#1821,#1822);+#1821 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#1822 = VECTOR('',#1823,1.);+#1823 = DIRECTION('',(-0.,-1.));+#1824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1825 = PCURVE('',#1400,#1826);+#1826 = DEFINITIONAL_REPRESENTATION('',(#1827),#1831);+#1827 = LINE('',#1828,#1829);+#1828 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#1829 = VECTOR('',#1830,1.);+#1830 = DIRECTION('',(0.,-1.));+#1831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1832 = ORIENTED_EDGE('',*,*,#1754,.F.);+#1833 = ORIENTED_EDGE('',*,*,#1493,.T.);+#1834 = ADVANCED_FACE('',(#1835),#1400,.F.);+#1835 = FACE_BOUND('',#1836,.F.);+#1836 = EDGE_LOOP('',(#1837,#1838,#1859,#1860));+#1837 = ORIENTED_EDGE('',*,*,#1731,.T.);+#1838 = ORIENTED_EDGE('',*,*,#1839,.F.);+#1839 = EDGE_CURVE('',#1356,#1708,#1840,.T.);+#1840 = SURFACE_CURVE('',#1841,(#1845,#1852),.PCURVE_S1.);+#1841 = LINE('',#1842,#1843);+#1842 = CARTESIAN_POINT('',(-2.66,-3.52308092439,0.6775));+#1843 = VECTOR('',#1844,1.);+#1844 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1845 = PCURVE('',#1400,#1846);+#1846 = DEFINITIONAL_REPRESENTATION('',(#1847),#1851);+#1847 = LINE('',#1848,#1849);+#1848 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#1849 = VECTOR('',#1850,1.);+#1850 = DIRECTION('',(0.,-1.));+#1851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1852 = PCURVE('',#1372,#1853);+#1853 = DEFINITIONAL_REPRESENTATION('',(#1854),#1858);+#1854 = LINE('',#1855,#1856);+#1855 = CARTESIAN_POINT('',(0.,9.E-02));+#1856 = VECTOR('',#1857,1.);+#1857 = DIRECTION('',(0.,-1.));+#1858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1859 = ORIENTED_EDGE('',*,*,#1384,.F.);+#1860 = ORIENTED_EDGE('',*,*,#1812,.T.);+#1861 = ADVANCED_FACE('',(#1862),#1372,.F.);+#1862 = FACE_BOUND('',#1863,.F.);+#1863 = EDGE_LOOP('',(#1864,#1865,#1886,#1887));+#1864 = ORIENTED_EDGE('',*,*,#1707,.T.);+#1865 = ORIENTED_EDGE('',*,*,#1866,.F.);+#1866 = EDGE_CURVE('',#1328,#1685,#1867,.T.);+#1867 = SURFACE_CURVE('',#1868,(#1872,#1879),.PCURVE_S1.);+#1868 = LINE('',#1869,#1870);+#1869 = CARTESIAN_POINT('',(-2.66,-3.560206845921,0.655138379526));+#1870 = VECTOR('',#1871,1.);+#1871 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1872 = PCURVE('',#1372,#1873);+#1873 = DEFINITIONAL_REPRESENTATION('',(#1874),#1878);+#1874 = LINE('',#1875,#1876);+#1875 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#1876 = VECTOR('',#1877,1.);+#1877 = DIRECTION('',(0.,-1.));+#1878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1879 = PCURVE('',#1343,#1880);+#1880 = DEFINITIONAL_REPRESENTATION('',(#1881),#1885);+#1881 = LINE('',#1882,#1883);+#1882 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#1883 = VECTOR('',#1884,1.);+#1884 = DIRECTION('',(-4.767113258106E-29,-1.));+#1885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1886 = ORIENTED_EDGE('',*,*,#1355,.F.);+#1887 = ORIENTED_EDGE('',*,*,#1839,.T.);+#1888 = ADVANCED_FACE('',(#1889),#1343,.F.);+#1889 = FACE_BOUND('',#1890,.F.);+#1890 = EDGE_LOOP('',(#1891,#1892,#1913,#1914));+#1891 = ORIENTED_EDGE('',*,*,#1684,.T.);+#1892 = ORIENTED_EDGE('',*,*,#1893,.F.);+#1893 = EDGE_CURVE('',#1299,#1661,#1894,.T.);+#1894 = SURFACE_CURVE('',#1895,(#1899,#1906),.PCURVE_S1.);+#1895 = LINE('',#1896,#1897);+#1896 = CARTESIAN_POINT('',(-2.66,-3.865353350249,7.826567165848E-02));+#1897 = VECTOR('',#1898,1.);+#1898 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1899 = PCURVE('',#1343,#1900);+#1900 = DEFINITIONAL_REPRESENTATION('',(#1901),#1905);+#1901 = LINE('',#1902,#1903);+#1902 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#1903 = VECTOR('',#1904,1.);+#1904 = DIRECTION('',(-4.767113258106E-29,-1.));+#1905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1906 = PCURVE('',#1315,#1907);+#1907 = DEFINITIONAL_REPRESENTATION('',(#1908),#1912);+#1908 = LINE('',#1909,#1910);+#1909 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#1910 = VECTOR('',#1911,1.);+#1911 = DIRECTION('',(0.,-1.));+#1912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1913 = ORIENTED_EDGE('',*,*,#1327,.F.);+#1914 = ORIENTED_EDGE('',*,*,#1866,.T.);+#1915 = ADVANCED_FACE('',(#1916),#1315,.T.);+#1916 = FACE_BOUND('',#1917,.T.);+#1917 = EDGE_LOOP('',(#1918,#1919,#1920,#1921));+#1918 = ORIENTED_EDGE('',*,*,#1660,.T.);+#1919 = ORIENTED_EDGE('',*,*,#1893,.F.);+#1920 = ORIENTED_EDGE('',*,*,#1298,.F.);+#1921 = ORIENTED_EDGE('',*,*,#1922,.T.);+#1922 = EDGE_CURVE('',#1271,#1638,#1923,.T.);+#1923 = SURFACE_CURVE('',#1924,(#1928,#1935),.PCURVE_S1.);+#1924 = LINE('',#1925,#1926);+#1925 = CARTESIAN_POINT('',(-2.66,-3.99529407561,0.));+#1926 = VECTOR('',#1927,1.);+#1927 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1928 = PCURVE('',#1315,#1929);+#1929 = DEFINITIONAL_REPRESENTATION('',(#1930),#1934);+#1930 = LINE('',#1931,#1932);+#1931 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#1932 = VECTOR('',#1933,1.);+#1933 = DIRECTION('',(0.,-1.));+#1934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1935 = PCURVE('',#1286,#1936);+#1936 = DEFINITIONAL_REPRESENTATION('',(#1937),#1941);+#1937 = LINE('',#1938,#1939);+#1938 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#1939 = VECTOR('',#1940,1.);+#1940 = DIRECTION('',(0.,-1.));+#1941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1942 = ADVANCED_FACE('',(#1943),#1286,.F.);+#1943 = FACE_BOUND('',#1944,.F.);+#1944 = EDGE_LOOP('',(#1945,#1946,#1947,#1968));+#1945 = ORIENTED_EDGE('',*,*,#1922,.T.);+#1946 = ORIENTED_EDGE('',*,*,#1637,.T.);+#1947 = ORIENTED_EDGE('',*,*,#1948,.T.);+#1948 = EDGE_CURVE('',#1615,#1243,#1949,.T.);+#1949 = SURFACE_CURVE('',#1950,(#1954,#1961),.PCURVE_S1.);+#1950 = LINE('',#1951,#1952);+#1951 = CARTESIAN_POINT('',(-3.045,-4.43,0.));+#1952 = VECTOR('',#1953,1.);+#1953 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1954 = PCURVE('',#1286,#1955);+#1955 = DEFINITIONAL_REPRESENTATION('',(#1956),#1960);+#1956 = LINE('',#1957,#1958);+#1957 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#1958 = VECTOR('',#1959,1.);+#1959 = DIRECTION('',(0.,1.));+#1960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1961 = PCURVE('',#1258,#1962);+#1962 = DEFINITIONAL_REPRESENTATION('',(#1963),#1967);+#1963 = LINE('',#1964,#1965);+#1964 = CARTESIAN_POINT('',(0.5,-0.295));+#1965 = VECTOR('',#1966,1.);+#1966 = DIRECTION('',(0.,-1.));+#1967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1968 = ORIENTED_EDGE('',*,*,#1270,.F.);+#1969 = ADVANCED_FACE('',(#1970),#1258,.T.);+#1970 = FACE_BOUND('',#1971,.T.);+#1971 = EDGE_LOOP('',(#1972,#1973,#1994,#1995));+#1972 = ORIENTED_EDGE('',*,*,#1242,.F.);+#1973 = ORIENTED_EDGE('',*,*,#1974,.F.);+#1974 = EDGE_CURVE('',#1592,#1215,#1975,.T.);+#1975 = SURFACE_CURVE('',#1976,(#1980,#1987),.PCURVE_S1.);+#1976 = LINE('',#1977,#1978);+#1977 = CARTESIAN_POINT('',(-3.045,-4.43,0.105));+#1978 = VECTOR('',#1979,1.);+#1979 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1980 = PCURVE('',#1258,#1981);+#1981 = DEFINITIONAL_REPRESENTATION('',(#1982),#1986);+#1982 = LINE('',#1983,#1984);+#1983 = CARTESIAN_POINT('',(0.605,-0.295));+#1984 = VECTOR('',#1985,1.);+#1985 = DIRECTION('',(0.,-1.));+#1986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1987 = PCURVE('',#1230,#1988);+#1988 = DEFINITIONAL_REPRESENTATION('',(#1989),#1993);+#1989 = LINE('',#1990,#1991);+#1990 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#1991 = VECTOR('',#1992,1.);+#1992 = DIRECTION('',(0.,1.));+#1993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1994 = ORIENTED_EDGE('',*,*,#1614,.T.);+#1995 = ORIENTED_EDGE('',*,*,#1948,.T.);+#1996 = ADVANCED_FACE('',(#1997),#1230,.T.);+#1997 = FACE_BOUND('',#1998,.T.);+#1998 = EDGE_LOOP('',(#1999,#2020,#2021,#2022));+#1999 = ORIENTED_EDGE('',*,*,#2000,.T.);+#2000 = EDGE_CURVE('',#1186,#1568,#2001,.T.);+#2001 = SURFACE_CURVE('',#2002,(#2006,#2013),.PCURVE_S1.);+#2002 = LINE('',#2003,#2004);+#2003 = CARTESIAN_POINT('',(-2.66,-3.99529407561,0.105));+#2004 = VECTOR('',#2005,1.);+#2005 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2006 = PCURVE('',#1230,#2007);+#2007 = DEFINITIONAL_REPRESENTATION('',(#2008),#2012);+#2008 = LINE('',#2009,#2010);+#2009 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#2010 = VECTOR('',#2011,1.);+#2011 = DIRECTION('',(0.,-1.));+#2012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2013 = PCURVE('',#1202,#2014);+#2014 = DEFINITIONAL_REPRESENTATION('',(#2015),#2019);+#2015 = LINE('',#2016,#2017);+#2016 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#2017 = VECTOR('',#2018,1.);+#2018 = DIRECTION('',(0.,-1.));+#2019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2020 = ORIENTED_EDGE('',*,*,#1591,.T.);+#2021 = ORIENTED_EDGE('',*,*,#1974,.T.);+#2022 = ORIENTED_EDGE('',*,*,#1214,.F.);+#2023 = ADVANCED_FACE('',(#2024),#1202,.F.);+#2024 = FACE_BOUND('',#2025,.F.);+#2025 = EDGE_LOOP('',(#2026,#2027,#2048,#2049));+#2026 = ORIENTED_EDGE('',*,*,#1567,.T.);+#2027 = ORIENTED_EDGE('',*,*,#2028,.F.);+#2028 = EDGE_CURVE('',#1158,#1545,#2029,.T.);+#2029 = SURFACE_CURVE('',#2030,(#2034,#2041),.PCURVE_S1.);+#2030 = LINE('',#2031,#2032);+#2031 = CARTESIAN_POINT('',(-2.66,-3.958168154079,0.127361620474));+#2032 = VECTOR('',#2033,1.);+#2033 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2034 = PCURVE('',#1202,#2035);+#2035 = DEFINITIONAL_REPRESENTATION('',(#2036),#2040);+#2036 = LINE('',#2037,#2038);+#2037 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#2038 = VECTOR('',#2039,1.);+#2039 = DIRECTION('',(0.,-1.));+#2040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2041 = PCURVE('',#1173,#2042);+#2042 = DEFINITIONAL_REPRESENTATION('',(#2043),#2047);+#2043 = LINE('',#2044,#2045);+#2044 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#2045 = VECTOR('',#2046,1.);+#2046 = DIRECTION('',(-4.767113258106E-29,-1.));+#2047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2048 = ORIENTED_EDGE('',*,*,#1185,.F.);+#2049 = ORIENTED_EDGE('',*,*,#2000,.T.);+#2050 = ADVANCED_FACE('',(#2051),#1173,.T.);+#2051 = FACE_BOUND('',#2052,.T.);+#2052 = EDGE_LOOP('',(#2053,#2054,#2055,#2056));+#2053 = ORIENTED_EDGE('',*,*,#1786,.F.);+#2054 = ORIENTED_EDGE('',*,*,#1544,.T.);+#2055 = ORIENTED_EDGE('',*,*,#2028,.F.);+#2056 = ORIENTED_EDGE('',*,*,#1157,.F.);+#2057 = MANIFOLD_SOLID_BREP('',#2058);+#2058 = CLOSED_SHELL('',(#2059,#2189,#2265,#2603,#2652,#2918,#2945,#2972+ ,#2999,#3026,#3053,#3080,#3107,#3134,#3161,#3188));+#2059 = ADVANCED_FACE('',(#2060),#2075,.T.);+#2060 = FACE_BOUND('',#2061,.T.);+#2061 = EDGE_LOOP('',(#2062,#2102,#2130,#2163));+#2062 = ORIENTED_EDGE('',*,*,#2063,.T.);+#2063 = EDGE_CURVE('',#2064,#2066,#2068,.T.);+#2064 = VERTEX_POINT('',#2065);+#2065 = CARTESIAN_POINT('',(-2.16,-3.25,0.7825));+#2066 = VERTEX_POINT('',#2067);+#2067 = CARTESIAN_POINT('',(-2.16,-3.2,0.746007810594));+#2068 = SURFACE_CURVE('',#2069,(#2074,#2086),.PCURVE_S1.);+#2069 = CIRCLE('',#2070,5.25E-02);+#2070 = AXIS2_PLACEMENT_3D('',#2071,#2072,#2073);+#2071 = CARTESIAN_POINT('',(-2.16,-3.25,0.73));+#2072 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2073 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2074 = PCURVE('',#2075,#2080);+#2075 = CYLINDRICAL_SURFACE('',#2076,5.25E-02);+#2076 = AXIS2_PLACEMENT_3D('',#2077,#2078,#2079);+#2077 = CARTESIAN_POINT('',(-2.25,-3.25,0.73));+#2078 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2079 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2080 = DEFINITIONAL_REPRESENTATION('',(#2081),#2085);+#2081 = LINE('',#2082,#2083);+#2082 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#2083 = VECTOR('',#2084,1.);+#2084 = DIRECTION('',(-1.,-0.));+#2085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2086 = PCURVE('',#2087,#2092);+#2087 = PLANE('',#2088);+#2088 = AXIS2_PLACEMENT_3D('',#2089,#2090,#2091);+#2089 = CARTESIAN_POINT('',(-2.16,-3.861815252728,0.337140815196));+#2090 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2091 = DIRECTION('',(0.,0.,1.));+#2092 = DEFINITIONAL_REPRESENTATION('',(#2093),#2101);+#2093 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2094,#2095,#2096,#2097,+#2098,#2099,#2100),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2094 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#2095 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#2096 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#2097 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#2098 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#2099 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#2100 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#2101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2102 = ORIENTED_EDGE('',*,*,#2103,.F.);+#2103 = EDGE_CURVE('',#2104,#2066,#2106,.T.);+#2104 = VERTEX_POINT('',#2105);+#2105 = CARTESIAN_POINT('',(-2.34,-3.2,0.746007810594));+#2106 = SURFACE_CURVE('',#2107,(#2111,#2118),.PCURVE_S1.);+#2107 = LINE('',#2108,#2109);+#2108 = CARTESIAN_POINT('',(-2.25,-3.2,0.746007810594));+#2109 = VECTOR('',#2110,1.);+#2110 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2111 = PCURVE('',#2075,#2112);+#2112 = DEFINITIONAL_REPRESENTATION('',(#2113),#2117);+#2113 = LINE('',#2114,#2115);+#2114 = CARTESIAN_POINT('',(3.451437293332,0.));+#2115 = VECTOR('',#2116,1.);+#2116 = DIRECTION('',(-0.,1.));+#2117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2118 = PCURVE('',#2119,#2124);+#2119 = PLANE('',#2120);+#2120 = AXIS2_PLACEMENT_3D('',#2121,#2122,#2123);+#2121 = CARTESIAN_POINT('',(-2.84,-3.2,-0.5));+#2122 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2123 = DIRECTION('',(0.,0.,1.));+#2124 = DEFINITIONAL_REPRESENTATION('',(#2125),#2129);+#2125 = LINE('',#2126,#2127);+#2126 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#2127 = VECTOR('',#2128,1.);+#2128 = DIRECTION('',(0.,-1.));+#2129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2130 = ORIENTED_EDGE('',*,*,#2131,.F.);+#2131 = EDGE_CURVE('',#2132,#2104,#2134,.T.);+#2132 = VERTEX_POINT('',#2133);+#2133 = CARTESIAN_POINT('',(-2.34,-3.25,0.7825));+#2134 = SURFACE_CURVE('',#2135,(#2140,#2147),.PCURVE_S1.);+#2135 = CIRCLE('',#2136,5.25E-02);+#2136 = AXIS2_PLACEMENT_3D('',#2137,#2138,#2139);+#2137 = CARTESIAN_POINT('',(-2.34,-3.25,0.73));+#2138 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2139 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2140 = PCURVE('',#2075,#2141);+#2141 = DEFINITIONAL_REPRESENTATION('',(#2142),#2146);+#2142 = LINE('',#2143,#2144);+#2143 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#2144 = VECTOR('',#2145,1.);+#2145 = DIRECTION('',(-1.,0.));+#2146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2147 = PCURVE('',#2148,#2153);+#2148 = PLANE('',#2149);+#2149 = AXIS2_PLACEMENT_3D('',#2150,#2151,#2152);+#2150 = CARTESIAN_POINT('',(-2.34,-3.861815252728,0.337140815196));+#2151 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2152 = DIRECTION('',(0.,0.,1.));+#2153 = DEFINITIONAL_REPRESENTATION('',(#2154),#2162);+#2154 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2155,#2156,#2157,#2158,+#2159,#2160,#2161),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2155 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#2156 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#2157 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#2158 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#2159 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#2160 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#2161 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#2162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2163 = ORIENTED_EDGE('',*,*,#2164,.T.);+#2164 = EDGE_CURVE('',#2132,#2064,#2165,.T.);+#2165 = SURFACE_CURVE('',#2166,(#2170,#2177),.PCURVE_S1.);+#2166 = LINE('',#2167,#2168);+#2167 = CARTESIAN_POINT('',(-2.34,-3.25,0.7825));+#2168 = VECTOR('',#2169,1.);+#2169 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2170 = PCURVE('',#2075,#2171);+#2171 = DEFINITIONAL_REPRESENTATION('',(#2172),#2176);+#2172 = LINE('',#2173,#2174);+#2173 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#2174 = VECTOR('',#2175,1.);+#2175 = DIRECTION('',(0.,1.));+#2176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2177 = PCURVE('',#2178,#2183);+#2178 = PLANE('',#2179);+#2179 = AXIS2_PLACEMENT_3D('',#2180,#2181,#2182);+#2180 = CARTESIAN_POINT('',(-2.25,-3.25,0.7825));+#2181 = DIRECTION('',(0.,0.,1.));+#2182 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2183 = DEFINITIONAL_REPRESENTATION('',(#2184),#2188);+#2184 = LINE('',#2185,#2186);+#2185 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#2186 = VECTOR('',#2187,1.);+#2187 = DIRECTION('',(0.,1.));+#2188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2189 = ADVANCED_FACE('',(#2190),#2178,.T.);+#2190 = FACE_BOUND('',#2191,.T.);+#2191 = EDGE_LOOP('',(#2192,#2193,#2216,#2244));+#2192 = ORIENTED_EDGE('',*,*,#2164,.F.);+#2193 = ORIENTED_EDGE('',*,*,#2194,.T.);+#2194 = EDGE_CURVE('',#2132,#2195,#2197,.T.);+#2195 = VERTEX_POINT('',#2196);+#2196 = CARTESIAN_POINT('',(-2.34,-3.52308092439,0.7825));+#2197 = SURFACE_CURVE('',#2198,(#2202,#2209),.PCURVE_S1.);+#2198 = LINE('',#2199,#2200);+#2199 = CARTESIAN_POINT('',(-2.34,-3.25,0.7825));+#2200 = VECTOR('',#2201,1.);+#2201 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2202 = PCURVE('',#2178,#2203);+#2203 = DEFINITIONAL_REPRESENTATION('',(#2204),#2208);+#2204 = LINE('',#2205,#2206);+#2205 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#2206 = VECTOR('',#2207,1.);+#2207 = DIRECTION('',(1.,0.));+#2208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2209 = PCURVE('',#2148,#2210);+#2210 = DEFINITIONAL_REPRESENTATION('',(#2211),#2215);+#2211 = LINE('',#2212,#2213);+#2212 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#2213 = VECTOR('',#2214,1.);+#2214 = DIRECTION('',(0.,1.));+#2215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2216 = ORIENTED_EDGE('',*,*,#2217,.T.);+#2217 = EDGE_CURVE('',#2195,#2218,#2220,.T.);+#2218 = VERTEX_POINT('',#2219);+#2219 = CARTESIAN_POINT('',(-2.16,-3.52308092439,0.7825));+#2220 = SURFACE_CURVE('',#2221,(#2225,#2232),.PCURVE_S1.);+#2221 = LINE('',#2222,#2223);+#2222 = CARTESIAN_POINT('',(-2.34,-3.52308092439,0.7825));+#2223 = VECTOR('',#2224,1.);+#2224 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2225 = PCURVE('',#2178,#2226);+#2226 = DEFINITIONAL_REPRESENTATION('',(#2227),#2231);+#2227 = LINE('',#2228,#2229);+#2228 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#2229 = VECTOR('',#2230,1.);+#2230 = DIRECTION('',(0.,1.));+#2231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2232 = PCURVE('',#2233,#2238);+#2233 = CYLINDRICAL_SURFACE('',#2234,0.147);+#2234 = AXIS2_PLACEMENT_3D('',#2235,#2236,#2237);+#2235 = CARTESIAN_POINT('',(-2.25,-3.52308092439,0.6355));+#2236 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2237 = DIRECTION('',(0.,0.,1.));+#2238 = DEFINITIONAL_REPRESENTATION('',(#2239),#2243);+#2239 = LINE('',#2240,#2241);+#2240 = CARTESIAN_POINT('',(0.,-9.E-02));+#2241 = VECTOR('',#2242,1.);+#2242 = DIRECTION('',(-0.,1.));+#2243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2244 = ORIENTED_EDGE('',*,*,#2245,.F.);+#2245 = EDGE_CURVE('',#2064,#2218,#2246,.T.);+#2246 = SURFACE_CURVE('',#2247,(#2251,#2258),.PCURVE_S1.);+#2247 = LINE('',#2248,#2249);+#2248 = CARTESIAN_POINT('',(-2.16,-3.25,0.7825));+#2249 = VECTOR('',#2250,1.);+#2250 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2251 = PCURVE('',#2178,#2252);+#2252 = DEFINITIONAL_REPRESENTATION('',(#2253),#2257);+#2253 = LINE('',#2254,#2255);+#2254 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#2255 = VECTOR('',#2256,1.);+#2256 = DIRECTION('',(1.,0.));+#2257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2258 = PCURVE('',#2087,#2259);+#2259 = DEFINITIONAL_REPRESENTATION('',(#2260),#2264);+#2260 = LINE('',#2261,#2262);+#2261 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#2262 = VECTOR('',#2263,1.);+#2263 = DIRECTION('',(0.,1.));+#2264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2265 = ADVANCED_FACE('',(#2266),#2087,.T.);+#2266 = FACE_BOUND('',#2267,.T.);+#2267 = EDGE_LOOP('',(#2268,#2269,#2270,#2294,#2322,#2351,#2379,#2407,+ #2435,#2464,#2492,#2521,#2549,#2582));+#2268 = ORIENTED_EDGE('',*,*,#2063,.F.);+#2269 = ORIENTED_EDGE('',*,*,#2245,.T.);+#2270 = ORIENTED_EDGE('',*,*,#2271,.T.);+#2271 = EDGE_CURVE('',#2218,#2272,#2274,.T.);+#2272 = VERTEX_POINT('',#2273);+#2273 = CARTESIAN_POINT('',(-2.16,-3.653021649751,0.704234328342));+#2274 = SURFACE_CURVE('',#2275,(#2280,#2287),.PCURVE_S1.);+#2275 = CIRCLE('',#2276,0.147);+#2276 = AXIS2_PLACEMENT_3D('',#2277,#2278,#2279);+#2277 = CARTESIAN_POINT('',(-2.16,-3.52308092439,0.6355));+#2278 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#2279 = DIRECTION('',(0.,0.,1.));+#2280 = PCURVE('',#2087,#2281);+#2281 = DEFINITIONAL_REPRESENTATION('',(#2282),#2286);+#2282 = CIRCLE('',#2283,0.147);+#2283 = AXIS2_PLACEMENT_2D('',#2284,#2285);+#2284 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#2285 = DIRECTION('',(1.,0.));+#2286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2287 = PCURVE('',#2233,#2288);+#2288 = DEFINITIONAL_REPRESENTATION('',(#2289),#2293);+#2289 = LINE('',#2290,#2291);+#2290 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#2291 = VECTOR('',#2292,1.);+#2292 = DIRECTION('',(1.,-0.));+#2293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2294 = ORIENTED_EDGE('',*,*,#2295,.T.);+#2295 = EDGE_CURVE('',#2272,#2296,#2298,.T.);+#2296 = VERTEX_POINT('',#2297);+#2297 = CARTESIAN_POINT('',(-2.16,-3.958168154079,0.127361620474));+#2298 = SURFACE_CURVE('',#2299,(#2303,#2310),.PCURVE_S1.);+#2299 = LINE('',#2300,#2301);+#2300 = CARTESIAN_POINT('',(-2.16,-3.626407401915,0.754547974408));+#2301 = VECTOR('',#2302,1.);+#2302 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#2303 = PCURVE('',#2087,#2304);+#2304 = DEFINITIONAL_REPRESENTATION('',(#2305),#2309);+#2305 = LINE('',#2306,#2307);+#2306 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#2307 = VECTOR('',#2308,1.);+#2308 = DIRECTION('',(-0.883950512662,0.467580464908));+#2309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2310 = PCURVE('',#2311,#2316);+#2311 = PLANE('',#2312);+#2312 = AXIS2_PLACEMENT_3D('',#2313,#2314,#2315);+#2313 = CARTESIAN_POINT('',(-2.25,-3.653021649751,0.704234328342));+#2314 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#2315 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#2316 = DEFINITIONAL_REPRESENTATION('',(#2317),#2321);+#2317 = LINE('',#2318,#2319);+#2318 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#2319 = VECTOR('',#2320,1.);+#2320 = DIRECTION('',(1.,-2.399596746007E-32));+#2321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2322 = ORIENTED_EDGE('',*,*,#2323,.F.);+#2323 = EDGE_CURVE('',#2324,#2296,#2326,.T.);+#2324 = VERTEX_POINT('',#2325);+#2325 = CARTESIAN_POINT('',(-2.16,-3.99529407561,0.105));+#2326 = SURFACE_CURVE('',#2327,(#2332,#2339),.PCURVE_S1.);+#2327 = CIRCLE('',#2328,4.2E-02);+#2328 = AXIS2_PLACEMENT_3D('',#2329,#2330,#2331);+#2329 = CARTESIAN_POINT('',(-2.16,-3.99529407561,0.147));+#2330 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#2331 = DIRECTION('',(0.,0.,1.));+#2332 = PCURVE('',#2087,#2333);+#2333 = DEFINITIONAL_REPRESENTATION('',(#2334),#2338);+#2334 = CIRCLE('',#2335,4.2E-02);+#2335 = AXIS2_PLACEMENT_2D('',#2336,#2337);+#2336 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#2337 = DIRECTION('',(1.,0.));+#2338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2339 = PCURVE('',#2340,#2345);+#2340 = CYLINDRICAL_SURFACE('',#2341,4.2E-02);+#2341 = AXIS2_PLACEMENT_3D('',#2342,#2343,#2344);+#2342 = CARTESIAN_POINT('',(-2.25,-3.99529407561,0.147));+#2343 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2344 = DIRECTION('',(0.,0.,1.));+#2345 = DEFINITIONAL_REPRESENTATION('',(#2346),#2350);+#2346 = LINE('',#2347,#2348);+#2347 = CARTESIAN_POINT('',(-0.,9.E-02));+#2348 = VECTOR('',#2349,1.);+#2349 = DIRECTION('',(1.,-0.));+#2350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2351 = ORIENTED_EDGE('',*,*,#2352,.T.);+#2352 = EDGE_CURVE('',#2324,#2353,#2355,.T.);+#2353 = VERTEX_POINT('',#2354);+#2354 = CARTESIAN_POINT('',(-2.16,-4.43,0.105));+#2355 = SURFACE_CURVE('',#2356,(#2360,#2367),.PCURVE_S1.);+#2356 = LINE('',#2357,#2358);+#2357 = CARTESIAN_POINT('',(-2.16,-3.938375,0.105));+#2358 = VECTOR('',#2359,1.);+#2359 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2360 = PCURVE('',#2087,#2361);+#2361 = DEFINITIONAL_REPRESENTATION('',(#2362),#2366);+#2362 = LINE('',#2363,#2364);+#2363 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#2364 = VECTOR('',#2365,1.);+#2365 = DIRECTION('',(0.,1.));+#2366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2367 = PCURVE('',#2368,#2373);+#2368 = PLANE('',#2369);+#2369 = AXIS2_PLACEMENT_3D('',#2370,#2371,#2372);+#2370 = CARTESIAN_POINT('',(-2.25,-3.99529407561,0.105));+#2371 = DIRECTION('',(0.,0.,1.));+#2372 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2373 = DEFINITIONAL_REPRESENTATION('',(#2374),#2378);+#2374 = LINE('',#2375,#2376);+#2375 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#2376 = VECTOR('',#2377,1.);+#2377 = DIRECTION('',(1.,0.));+#2378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2379 = ORIENTED_EDGE('',*,*,#2380,.T.);+#2380 = EDGE_CURVE('',#2353,#2381,#2383,.T.);+#2381 = VERTEX_POINT('',#2382);+#2382 = CARTESIAN_POINT('',(-2.16,-4.43,0.));+#2383 = SURFACE_CURVE('',#2384,(#2388,#2395),.PCURVE_S1.);+#2384 = LINE('',#2385,#2386);+#2385 = CARTESIAN_POINT('',(-2.16,-4.43,-8.142959240193E-02));+#2386 = VECTOR('',#2387,1.);+#2387 = DIRECTION('',(0.,0.,-1.));+#2388 = PCURVE('',#2087,#2389);+#2389 = DEFINITIONAL_REPRESENTATION('',(#2390),#2394);+#2390 = LINE('',#2391,#2392);+#2391 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#2392 = VECTOR('',#2393,1.);+#2393 = DIRECTION('',(-1.,0.));+#2394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2395 = PCURVE('',#2396,#2401);+#2396 = PLANE('',#2397);+#2397 = AXIS2_PLACEMENT_3D('',#2398,#2399,#2400);+#2398 = CARTESIAN_POINT('',(-2.84,-4.43,-0.5));+#2399 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2400 = DIRECTION('',(0.,0.,1.));+#2401 = DEFINITIONAL_REPRESENTATION('',(#2402),#2406);+#2402 = LINE('',#2403,#2404);+#2403 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#2404 = VECTOR('',#2405,1.);+#2405 = DIRECTION('',(-1.,-0.));+#2406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2407 = ORIENTED_EDGE('',*,*,#2408,.F.);+#2408 = EDGE_CURVE('',#2409,#2381,#2411,.T.);+#2409 = VERTEX_POINT('',#2410);+#2410 = CARTESIAN_POINT('',(-2.16,-3.99529407561,0.));+#2411 = SURFACE_CURVE('',#2412,(#2416,#2423),.PCURVE_S1.);+#2412 = LINE('',#2413,#2414);+#2413 = CARTESIAN_POINT('',(-2.16,-3.938375,0.));+#2414 = VECTOR('',#2415,1.);+#2415 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2416 = PCURVE('',#2087,#2417);+#2417 = DEFINITIONAL_REPRESENTATION('',(#2418),#2422);+#2418 = LINE('',#2419,#2420);+#2419 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#2420 = VECTOR('',#2421,1.);+#2421 = DIRECTION('',(0.,1.));+#2422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2423 = PCURVE('',#2424,#2429);+#2424 = PLANE('',#2425);+#2425 = AXIS2_PLACEMENT_3D('',#2426,#2427,#2428);+#2426 = CARTESIAN_POINT('',(-2.25,-3.99529407561,0.));+#2427 = DIRECTION('',(0.,0.,1.));+#2428 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2429 = DEFINITIONAL_REPRESENTATION('',(#2430),#2434);+#2430 = LINE('',#2431,#2432);+#2431 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#2432 = VECTOR('',#2433,1.);+#2433 = DIRECTION('',(1.,0.));+#2434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2435 = ORIENTED_EDGE('',*,*,#2436,.T.);+#2436 = EDGE_CURVE('',#2409,#2437,#2439,.T.);+#2437 = VERTEX_POINT('',#2438);+#2438 = CARTESIAN_POINT('',(-2.16,-3.865353350249,7.826567165848E-02));+#2439 = SURFACE_CURVE('',#2440,(#2445,#2452),.PCURVE_S1.);+#2440 = CIRCLE('',#2441,0.147);+#2441 = AXIS2_PLACEMENT_3D('',#2442,#2443,#2444);+#2442 = CARTESIAN_POINT('',(-2.16,-3.99529407561,0.147));+#2443 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#2444 = DIRECTION('',(0.,0.,1.));+#2445 = PCURVE('',#2087,#2446);+#2446 = DEFINITIONAL_REPRESENTATION('',(#2447),#2451);+#2447 = CIRCLE('',#2448,0.147);+#2448 = AXIS2_PLACEMENT_2D('',#2449,#2450);+#2449 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#2450 = DIRECTION('',(1.,0.));+#2451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2452 = PCURVE('',#2453,#2458);+#2453 = CYLINDRICAL_SURFACE('',#2454,0.147);+#2454 = AXIS2_PLACEMENT_3D('',#2455,#2456,#2457);+#2455 = CARTESIAN_POINT('',(-2.25,-3.99529407561,0.147));+#2456 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2457 = DIRECTION('',(0.,0.,1.));+#2458 = DEFINITIONAL_REPRESENTATION('',(#2459),#2463);+#2459 = LINE('',#2460,#2461);+#2460 = CARTESIAN_POINT('',(-0.,9.E-02));+#2461 = VECTOR('',#2462,1.);+#2462 = DIRECTION('',(1.,-0.));+#2463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2464 = ORIENTED_EDGE('',*,*,#2465,.F.);+#2465 = EDGE_CURVE('',#2466,#2437,#2468,.T.);+#2466 = VERTEX_POINT('',#2467);+#2467 = CARTESIAN_POINT('',(-2.16,-3.560206845921,0.655138379526));+#2468 = SURFACE_CURVE('',#2469,(#2473,#2480),.PCURVE_S1.);+#2469 = LINE('',#2470,#2471);+#2470 = CARTESIAN_POINT('',(-2.16,-3.533592598085,0.705452025592));+#2471 = VECTOR('',#2472,1.);+#2472 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#2473 = PCURVE('',#2087,#2474);+#2474 = DEFINITIONAL_REPRESENTATION('',(#2475),#2479);+#2475 = LINE('',#2476,#2477);+#2476 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#2477 = VECTOR('',#2478,1.);+#2478 = DIRECTION('',(-0.883950512662,0.467580464908));+#2479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2480 = PCURVE('',#2481,#2486);+#2481 = PLANE('',#2482);+#2482 = AXIS2_PLACEMENT_3D('',#2483,#2484,#2485);+#2483 = CARTESIAN_POINT('',(-2.25,-3.560206845921,0.655138379526));+#2484 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#2485 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#2486 = DEFINITIONAL_REPRESENTATION('',(#2487),#2491);+#2487 = LINE('',#2488,#2489);+#2488 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#2489 = VECTOR('',#2490,1.);+#2490 = DIRECTION('',(1.,-2.399596746007E-32));+#2491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2492 = ORIENTED_EDGE('',*,*,#2493,.F.);+#2493 = EDGE_CURVE('',#2494,#2466,#2496,.T.);+#2494 = VERTEX_POINT('',#2495);+#2495 = CARTESIAN_POINT('',(-2.16,-3.52308092439,0.6775));+#2496 = SURFACE_CURVE('',#2497,(#2502,#2509),.PCURVE_S1.);+#2497 = CIRCLE('',#2498,4.2E-02);+#2498 = AXIS2_PLACEMENT_3D('',#2499,#2500,#2501);+#2499 = CARTESIAN_POINT('',(-2.16,-3.52308092439,0.6355));+#2500 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#2501 = DIRECTION('',(0.,0.,1.));+#2502 = PCURVE('',#2087,#2503);+#2503 = DEFINITIONAL_REPRESENTATION('',(#2504),#2508);+#2504 = CIRCLE('',#2505,4.2E-02);+#2505 = AXIS2_PLACEMENT_2D('',#2506,#2507);+#2506 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#2507 = DIRECTION('',(1.,0.));+#2508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2509 = PCURVE('',#2510,#2515);+#2510 = CYLINDRICAL_SURFACE('',#2511,4.2E-02);+#2511 = AXIS2_PLACEMENT_3D('',#2512,#2513,#2514);+#2512 = CARTESIAN_POINT('',(-2.25,-3.52308092439,0.6355));+#2513 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2514 = DIRECTION('',(0.,0.,1.));+#2515 = DEFINITIONAL_REPRESENTATION('',(#2516),#2520);+#2516 = LINE('',#2517,#2518);+#2517 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#2518 = VECTOR('',#2519,1.);+#2519 = DIRECTION('',(1.,-0.));+#2520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2521 = ORIENTED_EDGE('',*,*,#2522,.F.);+#2522 = EDGE_CURVE('',#2523,#2494,#2525,.T.);+#2523 = VERTEX_POINT('',#2524);+#2524 = CARTESIAN_POINT('',(-2.16,-3.25,0.6775));+#2525 = SURFACE_CURVE('',#2526,(#2530,#2537),.PCURVE_S1.);+#2526 = LINE('',#2527,#2528);+#2527 = CARTESIAN_POINT('',(-2.16,-3.25,0.6775));+#2528 = VECTOR('',#2529,1.);+#2529 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2530 = PCURVE('',#2087,#2531);+#2531 = DEFINITIONAL_REPRESENTATION('',(#2532),#2536);+#2532 = LINE('',#2533,#2534);+#2533 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#2534 = VECTOR('',#2535,1.);+#2535 = DIRECTION('',(0.,1.));+#2536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2537 = PCURVE('',#2538,#2543);+#2538 = PLANE('',#2539);+#2539 = AXIS2_PLACEMENT_3D('',#2540,#2541,#2542);+#2540 = CARTESIAN_POINT('',(-2.25,-3.25,0.6775));+#2541 = DIRECTION('',(0.,0.,1.));+#2542 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2543 = DEFINITIONAL_REPRESENTATION('',(#2544),#2548);+#2544 = LINE('',#2545,#2546);+#2545 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#2546 = VECTOR('',#2547,1.);+#2547 = DIRECTION('',(1.,0.));+#2548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2549 = ORIENTED_EDGE('',*,*,#2550,.F.);+#2550 = EDGE_CURVE('',#2551,#2523,#2553,.T.);+#2551 = VERTEX_POINT('',#2552);+#2552 = CARTESIAN_POINT('',(-2.16,-3.2,0.713992189406));+#2553 = SURFACE_CURVE('',#2554,(#2559,#2570),.PCURVE_S1.);+#2554 = CIRCLE('',#2555,5.25E-02);+#2555 = AXIS2_PLACEMENT_3D('',#2556,#2557,#2558);+#2556 = CARTESIAN_POINT('',(-2.16,-3.25,0.73));+#2557 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2558 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2559 = PCURVE('',#2087,#2560);+#2560 = DEFINITIONAL_REPRESENTATION('',(#2561),#2569);+#2561 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2562,#2563,#2564,#2565,+#2566,#2567,#2568),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2562 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#2563 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#2564 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#2565 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#2566 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#2567 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#2568 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#2569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2570 = PCURVE('',#2571,#2576);+#2571 = CYLINDRICAL_SURFACE('',#2572,5.25E-02);+#2572 = AXIS2_PLACEMENT_3D('',#2573,#2574,#2575);+#2573 = CARTESIAN_POINT('',(-2.25,-3.25,0.73));+#2574 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2575 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2576 = DEFINITIONAL_REPRESENTATION('',(#2577),#2581);+#2577 = LINE('',#2578,#2579);+#2578 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#2579 = VECTOR('',#2580,1.);+#2580 = DIRECTION('',(-1.,-0.));+#2581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2582 = ORIENTED_EDGE('',*,*,#2583,.F.);+#2583 = EDGE_CURVE('',#2066,#2551,#2584,.T.);+#2584 = SURFACE_CURVE('',#2585,(#2589,#2596),.PCURVE_S1.);+#2585 = LINE('',#2586,#2587);+#2586 = CARTESIAN_POINT('',(-2.16,-3.2,-8.142959240193E-02));+#2587 = VECTOR('',#2588,1.);+#2588 = DIRECTION('',(0.,0.,-1.));+#2589 = PCURVE('',#2087,#2590);+#2590 = DEFINITIONAL_REPRESENTATION('',(#2591),#2595);+#2591 = LINE('',#2592,#2593);+#2592 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#2593 = VECTOR('',#2594,1.);+#2594 = DIRECTION('',(-1.,0.));+#2595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2596 = PCURVE('',#2119,#2597);+#2597 = DEFINITIONAL_REPRESENTATION('',(#2598),#2602);+#2598 = LINE('',#2599,#2600);+#2599 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#2600 = VECTOR('',#2601,1.);+#2601 = DIRECTION('',(-1.,-0.));+#2602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2603 = ADVANCED_FACE('',(#2604),#2119,.F.);+#2604 = FACE_BOUND('',#2605,.F.);+#2605 = EDGE_LOOP('',(#2606,#2607,#2630,#2651));+#2606 = ORIENTED_EDGE('',*,*,#2103,.F.);+#2607 = ORIENTED_EDGE('',*,*,#2608,.T.);+#2608 = EDGE_CURVE('',#2104,#2609,#2611,.T.);+#2609 = VERTEX_POINT('',#2610);+#2610 = CARTESIAN_POINT('',(-2.34,-3.2,0.713992189406));+#2611 = SURFACE_CURVE('',#2612,(#2616,#2623),.PCURVE_S1.);+#2612 = LINE('',#2613,#2614);+#2613 = CARTESIAN_POINT('',(-2.34,-3.2,-8.142959240193E-02));+#2614 = VECTOR('',#2615,1.);+#2615 = DIRECTION('',(0.,0.,-1.));+#2616 = PCURVE('',#2119,#2617);+#2617 = DEFINITIONAL_REPRESENTATION('',(#2618),#2622);+#2618 = LINE('',#2619,#2620);+#2619 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#2620 = VECTOR('',#2621,1.);+#2621 = DIRECTION('',(-1.,-0.));+#2622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2623 = PCURVE('',#2148,#2624);+#2624 = DEFINITIONAL_REPRESENTATION('',(#2625),#2629);+#2625 = LINE('',#2626,#2627);+#2626 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#2627 = VECTOR('',#2628,1.);+#2628 = DIRECTION('',(-1.,0.));+#2629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2630 = ORIENTED_EDGE('',*,*,#2631,.T.);+#2631 = EDGE_CURVE('',#2609,#2551,#2632,.T.);+#2632 = SURFACE_CURVE('',#2633,(#2637,#2644),.PCURVE_S1.);+#2633 = LINE('',#2634,#2635);+#2634 = CARTESIAN_POINT('',(-2.25,-3.2,0.713992189406));+#2635 = VECTOR('',#2636,1.);+#2636 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2637 = PCURVE('',#2119,#2638);+#2638 = DEFINITIONAL_REPRESENTATION('',(#2639),#2643);+#2639 = LINE('',#2640,#2641);+#2640 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#2641 = VECTOR('',#2642,1.);+#2642 = DIRECTION('',(0.,-1.));+#2643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2644 = PCURVE('',#2571,#2645);+#2645 = DEFINITIONAL_REPRESENTATION('',(#2646),#2650);+#2646 = LINE('',#2647,#2648);+#2647 = CARTESIAN_POINT('',(2.831748013849,0.));+#2648 = VECTOR('',#2649,1.);+#2649 = DIRECTION('',(-0.,1.));+#2650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2651 = ORIENTED_EDGE('',*,*,#2583,.F.);+#2652 = ADVANCED_FACE('',(#2653),#2148,.F.);+#2653 = FACE_BOUND('',#2654,.F.);+#2654 = EDGE_LOOP('',(#2655,#2656,#2657,#2681,#2704,#2728,#2751,#2774,+ #2797,#2821,#2844,#2868,#2891,#2917));+#2655 = ORIENTED_EDGE('',*,*,#2131,.F.);+#2656 = ORIENTED_EDGE('',*,*,#2194,.T.);+#2657 = ORIENTED_EDGE('',*,*,#2658,.T.);+#2658 = EDGE_CURVE('',#2195,#2659,#2661,.T.);+#2659 = VERTEX_POINT('',#2660);+#2660 = CARTESIAN_POINT('',(-2.34,-3.653021649751,0.704234328342));+#2661 = SURFACE_CURVE('',#2662,(#2667,#2674),.PCURVE_S1.);+#2662 = CIRCLE('',#2663,0.147);+#2663 = AXIS2_PLACEMENT_3D('',#2664,#2665,#2666);+#2664 = CARTESIAN_POINT('',(-2.34,-3.52308092439,0.6355));+#2665 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#2666 = DIRECTION('',(0.,0.,1.));+#2667 = PCURVE('',#2148,#2668);+#2668 = DEFINITIONAL_REPRESENTATION('',(#2669),#2673);+#2669 = CIRCLE('',#2670,0.147);+#2670 = AXIS2_PLACEMENT_2D('',#2671,#2672);+#2671 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#2672 = DIRECTION('',(1.,0.));+#2673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2674 = PCURVE('',#2233,#2675);+#2675 = DEFINITIONAL_REPRESENTATION('',(#2676),#2680);+#2676 = LINE('',#2677,#2678);+#2677 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#2678 = VECTOR('',#2679,1.);+#2679 = DIRECTION('',(1.,0.));+#2680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2681 = ORIENTED_EDGE('',*,*,#2682,.T.);+#2682 = EDGE_CURVE('',#2659,#2683,#2685,.T.);+#2683 = VERTEX_POINT('',#2684);+#2684 = CARTESIAN_POINT('',(-2.34,-3.958168154079,0.127361620474));+#2685 = SURFACE_CURVE('',#2686,(#2690,#2697),.PCURVE_S1.);+#2686 = LINE('',#2687,#2688);+#2687 = CARTESIAN_POINT('',(-2.34,-3.626407401915,0.754547974408));+#2688 = VECTOR('',#2689,1.);+#2689 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#2690 = PCURVE('',#2148,#2691);+#2691 = DEFINITIONAL_REPRESENTATION('',(#2692),#2696);+#2692 = LINE('',#2693,#2694);+#2693 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#2694 = VECTOR('',#2695,1.);+#2695 = DIRECTION('',(-0.883950512662,0.467580464908));+#2696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2697 = PCURVE('',#2311,#2698);+#2698 = DEFINITIONAL_REPRESENTATION('',(#2699),#2703);+#2699 = LINE('',#2700,#2701);+#2700 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#2701 = VECTOR('',#2702,1.);+#2702 = DIRECTION('',(1.,-2.399596746007E-32));+#2703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2704 = ORIENTED_EDGE('',*,*,#2705,.F.);+#2705 = EDGE_CURVE('',#2706,#2683,#2708,.T.);+#2706 = VERTEX_POINT('',#2707);+#2707 = CARTESIAN_POINT('',(-2.34,-3.99529407561,0.105));+#2708 = SURFACE_CURVE('',#2709,(#2714,#2721),.PCURVE_S1.);+#2709 = CIRCLE('',#2710,4.2E-02);+#2710 = AXIS2_PLACEMENT_3D('',#2711,#2712,#2713);+#2711 = CARTESIAN_POINT('',(-2.34,-3.99529407561,0.147));+#2712 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#2713 = DIRECTION('',(0.,0.,1.));+#2714 = PCURVE('',#2148,#2715);+#2715 = DEFINITIONAL_REPRESENTATION('',(#2716),#2720);+#2716 = CIRCLE('',#2717,4.2E-02);+#2717 = AXIS2_PLACEMENT_2D('',#2718,#2719);+#2718 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#2719 = DIRECTION('',(1.,0.));+#2720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2721 = PCURVE('',#2340,#2722);+#2722 = DEFINITIONAL_REPRESENTATION('',(#2723),#2727);+#2723 = LINE('',#2724,#2725);+#2724 = CARTESIAN_POINT('',(0.,-9.E-02));+#2725 = VECTOR('',#2726,1.);+#2726 = DIRECTION('',(1.,0.));+#2727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2728 = ORIENTED_EDGE('',*,*,#2729,.T.);+#2729 = EDGE_CURVE('',#2706,#2730,#2732,.T.);+#2730 = VERTEX_POINT('',#2731);+#2731 = CARTESIAN_POINT('',(-2.34,-4.43,0.105));+#2732 = SURFACE_CURVE('',#2733,(#2737,#2744),.PCURVE_S1.);+#2733 = LINE('',#2734,#2735);+#2734 = CARTESIAN_POINT('',(-2.34,-3.938375,0.105));+#2735 = VECTOR('',#2736,1.);+#2736 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2737 = PCURVE('',#2148,#2738);+#2738 = DEFINITIONAL_REPRESENTATION('',(#2739),#2743);+#2739 = LINE('',#2740,#2741);+#2740 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#2741 = VECTOR('',#2742,1.);+#2742 = DIRECTION('',(0.,1.));+#2743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2744 = PCURVE('',#2368,#2745);+#2745 = DEFINITIONAL_REPRESENTATION('',(#2746),#2750);+#2746 = LINE('',#2747,#2748);+#2747 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#2748 = VECTOR('',#2749,1.);+#2749 = DIRECTION('',(1.,0.));+#2750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2751 = ORIENTED_EDGE('',*,*,#2752,.T.);+#2752 = EDGE_CURVE('',#2730,#2753,#2755,.T.);+#2753 = VERTEX_POINT('',#2754);+#2754 = CARTESIAN_POINT('',(-2.34,-4.43,0.));+#2755 = SURFACE_CURVE('',#2756,(#2760,#2767),.PCURVE_S1.);+#2756 = LINE('',#2757,#2758);+#2757 = CARTESIAN_POINT('',(-2.34,-4.43,-8.142959240193E-02));+#2758 = VECTOR('',#2759,1.);+#2759 = DIRECTION('',(0.,0.,-1.));+#2760 = PCURVE('',#2148,#2761);+#2761 = DEFINITIONAL_REPRESENTATION('',(#2762),#2766);+#2762 = LINE('',#2763,#2764);+#2763 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#2764 = VECTOR('',#2765,1.);+#2765 = DIRECTION('',(-1.,0.));+#2766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2767 = PCURVE('',#2396,#2768);+#2768 = DEFINITIONAL_REPRESENTATION('',(#2769),#2773);+#2769 = LINE('',#2770,#2771);+#2770 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#2771 = VECTOR('',#2772,1.);+#2772 = DIRECTION('',(-1.,-0.));+#2773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2774 = ORIENTED_EDGE('',*,*,#2775,.F.);+#2775 = EDGE_CURVE('',#2776,#2753,#2778,.T.);+#2776 = VERTEX_POINT('',#2777);+#2777 = CARTESIAN_POINT('',(-2.34,-3.99529407561,0.));+#2778 = SURFACE_CURVE('',#2779,(#2783,#2790),.PCURVE_S1.);+#2779 = LINE('',#2780,#2781);+#2780 = CARTESIAN_POINT('',(-2.34,-3.938375,0.));+#2781 = VECTOR('',#2782,1.);+#2782 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2783 = PCURVE('',#2148,#2784);+#2784 = DEFINITIONAL_REPRESENTATION('',(#2785),#2789);+#2785 = LINE('',#2786,#2787);+#2786 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#2787 = VECTOR('',#2788,1.);+#2788 = DIRECTION('',(0.,1.));+#2789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2790 = PCURVE('',#2424,#2791);+#2791 = DEFINITIONAL_REPRESENTATION('',(#2792),#2796);+#2792 = LINE('',#2793,#2794);+#2793 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#2794 = VECTOR('',#2795,1.);+#2795 = DIRECTION('',(1.,0.));+#2796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2797 = ORIENTED_EDGE('',*,*,#2798,.T.);+#2798 = EDGE_CURVE('',#2776,#2799,#2801,.T.);+#2799 = VERTEX_POINT('',#2800);+#2800 = CARTESIAN_POINT('',(-2.34,-3.865353350249,7.826567165848E-02));+#2801 = SURFACE_CURVE('',#2802,(#2807,#2814),.PCURVE_S1.);+#2802 = CIRCLE('',#2803,0.147);+#2803 = AXIS2_PLACEMENT_3D('',#2804,#2805,#2806);+#2804 = CARTESIAN_POINT('',(-2.34,-3.99529407561,0.147));+#2805 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#2806 = DIRECTION('',(0.,0.,1.));+#2807 = PCURVE('',#2148,#2808);+#2808 = DEFINITIONAL_REPRESENTATION('',(#2809),#2813);+#2809 = CIRCLE('',#2810,0.147);+#2810 = AXIS2_PLACEMENT_2D('',#2811,#2812);+#2811 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#2812 = DIRECTION('',(1.,0.));+#2813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2814 = PCURVE('',#2453,#2815);+#2815 = DEFINITIONAL_REPRESENTATION('',(#2816),#2820);+#2816 = LINE('',#2817,#2818);+#2817 = CARTESIAN_POINT('',(0.,-9.E-02));+#2818 = VECTOR('',#2819,1.);+#2819 = DIRECTION('',(1.,0.));+#2820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2821 = ORIENTED_EDGE('',*,*,#2822,.F.);+#2822 = EDGE_CURVE('',#2823,#2799,#2825,.T.);+#2823 = VERTEX_POINT('',#2824);+#2824 = CARTESIAN_POINT('',(-2.34,-3.560206845921,0.655138379526));+#2825 = SURFACE_CURVE('',#2826,(#2830,#2837),.PCURVE_S1.);+#2826 = LINE('',#2827,#2828);+#2827 = CARTESIAN_POINT('',(-2.34,-3.533592598085,0.705452025592));+#2828 = VECTOR('',#2829,1.);+#2829 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#2830 = PCURVE('',#2148,#2831);+#2831 = DEFINITIONAL_REPRESENTATION('',(#2832),#2836);+#2832 = LINE('',#2833,#2834);+#2833 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#2834 = VECTOR('',#2835,1.);+#2835 = DIRECTION('',(-0.883950512662,0.467580464908));+#2836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2837 = PCURVE('',#2481,#2838);+#2838 = DEFINITIONAL_REPRESENTATION('',(#2839),#2843);+#2839 = LINE('',#2840,#2841);+#2840 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#2841 = VECTOR('',#2842,1.);+#2842 = DIRECTION('',(1.,-2.399596746007E-32));+#2843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2844 = ORIENTED_EDGE('',*,*,#2845,.F.);+#2845 = EDGE_CURVE('',#2846,#2823,#2848,.T.);+#2846 = VERTEX_POINT('',#2847);+#2847 = CARTESIAN_POINT('',(-2.34,-3.52308092439,0.6775));+#2848 = SURFACE_CURVE('',#2849,(#2854,#2861),.PCURVE_S1.);+#2849 = CIRCLE('',#2850,4.2E-02);+#2850 = AXIS2_PLACEMENT_3D('',#2851,#2852,#2853);+#2851 = CARTESIAN_POINT('',(-2.34,-3.52308092439,0.6355));+#2852 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#2853 = DIRECTION('',(0.,0.,1.));+#2854 = PCURVE('',#2148,#2855);+#2855 = DEFINITIONAL_REPRESENTATION('',(#2856),#2860);+#2856 = CIRCLE('',#2857,4.2E-02);+#2857 = AXIS2_PLACEMENT_2D('',#2858,#2859);+#2858 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#2859 = DIRECTION('',(1.,0.));+#2860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2861 = PCURVE('',#2510,#2862);+#2862 = DEFINITIONAL_REPRESENTATION('',(#2863),#2867);+#2863 = LINE('',#2864,#2865);+#2864 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#2865 = VECTOR('',#2866,1.);+#2866 = DIRECTION('',(1.,0.));+#2867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2868 = ORIENTED_EDGE('',*,*,#2869,.F.);+#2869 = EDGE_CURVE('',#2870,#2846,#2872,.T.);+#2870 = VERTEX_POINT('',#2871);+#2871 = CARTESIAN_POINT('',(-2.34,-3.25,0.6775));+#2872 = SURFACE_CURVE('',#2873,(#2877,#2884),.PCURVE_S1.);+#2873 = LINE('',#2874,#2875);+#2874 = CARTESIAN_POINT('',(-2.34,-3.25,0.6775));+#2875 = VECTOR('',#2876,1.);+#2876 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2877 = PCURVE('',#2148,#2878);+#2878 = DEFINITIONAL_REPRESENTATION('',(#2879),#2883);+#2879 = LINE('',#2880,#2881);+#2880 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#2881 = VECTOR('',#2882,1.);+#2882 = DIRECTION('',(0.,1.));+#2883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2884 = PCURVE('',#2538,#2885);+#2885 = DEFINITIONAL_REPRESENTATION('',(#2886),#2890);+#2886 = LINE('',#2887,#2888);+#2887 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#2888 = VECTOR('',#2889,1.);+#2889 = DIRECTION('',(1.,0.));+#2890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2891 = ORIENTED_EDGE('',*,*,#2892,.F.);+#2892 = EDGE_CURVE('',#2609,#2870,#2893,.T.);+#2893 = SURFACE_CURVE('',#2894,(#2899,#2910),.PCURVE_S1.);+#2894 = CIRCLE('',#2895,5.25E-02);+#2895 = AXIS2_PLACEMENT_3D('',#2896,#2897,#2898);+#2896 = CARTESIAN_POINT('',(-2.34,-3.25,0.73));+#2897 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2898 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2899 = PCURVE('',#2148,#2900);+#2900 = DEFINITIONAL_REPRESENTATION('',(#2901),#2909);+#2901 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2902,#2903,#2904,#2905,+#2906,#2907,#2908),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2902 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#2903 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#2904 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#2905 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#2906 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#2907 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#2908 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#2909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2910 = PCURVE('',#2571,#2911);+#2911 = DEFINITIONAL_REPRESENTATION('',(#2912),#2916);+#2912 = LINE('',#2913,#2914);+#2913 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#2914 = VECTOR('',#2915,1.);+#2915 = DIRECTION('',(-1.,0.));+#2916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2917 = ORIENTED_EDGE('',*,*,#2608,.F.);+#2918 = ADVANCED_FACE('',(#2919),#2233,.T.);+#2919 = FACE_BOUND('',#2920,.T.);+#2920 = EDGE_LOOP('',(#2921,#2922,#2923,#2944));+#2921 = ORIENTED_EDGE('',*,*,#2217,.F.);+#2922 = ORIENTED_EDGE('',*,*,#2658,.T.);+#2923 = ORIENTED_EDGE('',*,*,#2924,.T.);+#2924 = EDGE_CURVE('',#2659,#2272,#2925,.T.);+#2925 = SURFACE_CURVE('',#2926,(#2930,#2937),.PCURVE_S1.);+#2926 = LINE('',#2927,#2928);+#2927 = CARTESIAN_POINT('',(-2.34,-3.653021649751,0.704234328342));+#2928 = VECTOR('',#2929,1.);+#2929 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2930 = PCURVE('',#2233,#2931);+#2931 = DEFINITIONAL_REPRESENTATION('',(#2932),#2936);+#2932 = LINE('',#2933,#2934);+#2933 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#2934 = VECTOR('',#2935,1.);+#2935 = DIRECTION('',(-0.,1.));+#2936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2937 = PCURVE('',#2311,#2938);+#2938 = DEFINITIONAL_REPRESENTATION('',(#2939),#2943);+#2939 = LINE('',#2940,#2941);+#2940 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#2941 = VECTOR('',#2942,1.);+#2942 = DIRECTION('',(4.767113258106E-29,1.));+#2943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2944 = ORIENTED_EDGE('',*,*,#2271,.F.);+#2945 = ADVANCED_FACE('',(#2946),#2571,.T.);+#2946 = FACE_BOUND('',#2947,.T.);+#2947 = EDGE_LOOP('',(#2948,#2949,#2970,#2971));+#2948 = ORIENTED_EDGE('',*,*,#2550,.T.);+#2949 = ORIENTED_EDGE('',*,*,#2950,.T.);+#2950 = EDGE_CURVE('',#2523,#2870,#2951,.T.);+#2951 = SURFACE_CURVE('',#2952,(#2956,#2963),.PCURVE_S1.);+#2952 = LINE('',#2953,#2954);+#2953 = CARTESIAN_POINT('',(-2.16,-3.25,0.6775));+#2954 = VECTOR('',#2955,1.);+#2955 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2956 = PCURVE('',#2571,#2957);+#2957 = DEFINITIONAL_REPRESENTATION('',(#2958),#2962);+#2958 = LINE('',#2959,#2960);+#2959 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#2960 = VECTOR('',#2961,1.);+#2961 = DIRECTION('',(-0.,-1.));+#2962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2963 = PCURVE('',#2538,#2964);+#2964 = DEFINITIONAL_REPRESENTATION('',(#2965),#2969);+#2965 = LINE('',#2966,#2967);+#2966 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#2967 = VECTOR('',#2968,1.);+#2968 = DIRECTION('',(0.,-1.));+#2969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2970 = ORIENTED_EDGE('',*,*,#2892,.F.);+#2971 = ORIENTED_EDGE('',*,*,#2631,.T.);+#2972 = ADVANCED_FACE('',(#2973),#2538,.F.);+#2973 = FACE_BOUND('',#2974,.F.);+#2974 = EDGE_LOOP('',(#2975,#2976,#2997,#2998));+#2975 = ORIENTED_EDGE('',*,*,#2869,.T.);+#2976 = ORIENTED_EDGE('',*,*,#2977,.F.);+#2977 = EDGE_CURVE('',#2494,#2846,#2978,.T.);+#2978 = SURFACE_CURVE('',#2979,(#2983,#2990),.PCURVE_S1.);+#2979 = LINE('',#2980,#2981);+#2980 = CARTESIAN_POINT('',(-2.16,-3.52308092439,0.6775));+#2981 = VECTOR('',#2982,1.);+#2982 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2983 = PCURVE('',#2538,#2984);+#2984 = DEFINITIONAL_REPRESENTATION('',(#2985),#2989);+#2985 = LINE('',#2986,#2987);+#2986 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#2987 = VECTOR('',#2988,1.);+#2988 = DIRECTION('',(0.,-1.));+#2989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2990 = PCURVE('',#2510,#2991);+#2991 = DEFINITIONAL_REPRESENTATION('',(#2992),#2996);+#2992 = LINE('',#2993,#2994);+#2993 = CARTESIAN_POINT('',(0.,9.E-02));+#2994 = VECTOR('',#2995,1.);+#2995 = DIRECTION('',(0.,-1.));+#2996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2997 = ORIENTED_EDGE('',*,*,#2522,.F.);+#2998 = ORIENTED_EDGE('',*,*,#2950,.T.);+#2999 = ADVANCED_FACE('',(#3000),#2510,.F.);+#3000 = FACE_BOUND('',#3001,.F.);+#3001 = EDGE_LOOP('',(#3002,#3003,#3024,#3025));+#3002 = ORIENTED_EDGE('',*,*,#2845,.T.);+#3003 = ORIENTED_EDGE('',*,*,#3004,.F.);+#3004 = EDGE_CURVE('',#2466,#2823,#3005,.T.);+#3005 = SURFACE_CURVE('',#3006,(#3010,#3017),.PCURVE_S1.);+#3006 = LINE('',#3007,#3008);+#3007 = CARTESIAN_POINT('',(-2.16,-3.560206845921,0.655138379526));+#3008 = VECTOR('',#3009,1.);+#3009 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3010 = PCURVE('',#2510,#3011);+#3011 = DEFINITIONAL_REPRESENTATION('',(#3012),#3016);+#3012 = LINE('',#3013,#3014);+#3013 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#3014 = VECTOR('',#3015,1.);+#3015 = DIRECTION('',(0.,-1.));+#3016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3017 = PCURVE('',#2481,#3018);+#3018 = DEFINITIONAL_REPRESENTATION('',(#3019),#3023);+#3019 = LINE('',#3020,#3021);+#3020 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#3021 = VECTOR('',#3022,1.);+#3022 = DIRECTION('',(-4.767113258106E-29,-1.));+#3023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3024 = ORIENTED_EDGE('',*,*,#2493,.F.);+#3025 = ORIENTED_EDGE('',*,*,#2977,.T.);+#3026 = ADVANCED_FACE('',(#3027),#2481,.F.);+#3027 = FACE_BOUND('',#3028,.F.);+#3028 = EDGE_LOOP('',(#3029,#3030,#3051,#3052));+#3029 = ORIENTED_EDGE('',*,*,#2822,.T.);+#3030 = ORIENTED_EDGE('',*,*,#3031,.F.);+#3031 = EDGE_CURVE('',#2437,#2799,#3032,.T.);+#3032 = SURFACE_CURVE('',#3033,(#3037,#3044),.PCURVE_S1.);+#3033 = LINE('',#3034,#3035);+#3034 = CARTESIAN_POINT('',(-2.16,-3.865353350249,7.826567165848E-02));+#3035 = VECTOR('',#3036,1.);+#3036 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3037 = PCURVE('',#2481,#3038);+#3038 = DEFINITIONAL_REPRESENTATION('',(#3039),#3043);+#3039 = LINE('',#3040,#3041);+#3040 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#3041 = VECTOR('',#3042,1.);+#3042 = DIRECTION('',(-4.767113258106E-29,-1.));+#3043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3044 = PCURVE('',#2453,#3045);+#3045 = DEFINITIONAL_REPRESENTATION('',(#3046),#3050);+#3046 = LINE('',#3047,#3048);+#3047 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#3048 = VECTOR('',#3049,1.);+#3049 = DIRECTION('',(0.,-1.));+#3050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3051 = ORIENTED_EDGE('',*,*,#2465,.F.);+#3052 = ORIENTED_EDGE('',*,*,#3004,.T.);+#3053 = ADVANCED_FACE('',(#3054),#2453,.T.);+#3054 = FACE_BOUND('',#3055,.T.);+#3055 = EDGE_LOOP('',(#3056,#3057,#3058,#3059));+#3056 = ORIENTED_EDGE('',*,*,#2798,.T.);+#3057 = ORIENTED_EDGE('',*,*,#3031,.F.);+#3058 = ORIENTED_EDGE('',*,*,#2436,.F.);+#3059 = ORIENTED_EDGE('',*,*,#3060,.T.);+#3060 = EDGE_CURVE('',#2409,#2776,#3061,.T.);+#3061 = SURFACE_CURVE('',#3062,(#3066,#3073),.PCURVE_S1.);+#3062 = LINE('',#3063,#3064);+#3063 = CARTESIAN_POINT('',(-2.16,-3.99529407561,0.));+#3064 = VECTOR('',#3065,1.);+#3065 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3066 = PCURVE('',#2453,#3067);+#3067 = DEFINITIONAL_REPRESENTATION('',(#3068),#3072);+#3068 = LINE('',#3069,#3070);+#3069 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#3070 = VECTOR('',#3071,1.);+#3071 = DIRECTION('',(0.,-1.));+#3072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3073 = PCURVE('',#2424,#3074);+#3074 = DEFINITIONAL_REPRESENTATION('',(#3075),#3079);+#3075 = LINE('',#3076,#3077);+#3076 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#3077 = VECTOR('',#3078,1.);+#3078 = DIRECTION('',(0.,-1.));+#3079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3080 = ADVANCED_FACE('',(#3081),#2424,.F.);+#3081 = FACE_BOUND('',#3082,.F.);+#3082 = EDGE_LOOP('',(#3083,#3084,#3085,#3106));+#3083 = ORIENTED_EDGE('',*,*,#3060,.T.);+#3084 = ORIENTED_EDGE('',*,*,#2775,.T.);+#3085 = ORIENTED_EDGE('',*,*,#3086,.T.);+#3086 = EDGE_CURVE('',#2753,#2381,#3087,.T.);+#3087 = SURFACE_CURVE('',#3088,(#3092,#3099),.PCURVE_S1.);+#3088 = LINE('',#3089,#3090);+#3089 = CARTESIAN_POINT('',(-2.545,-4.43,0.));+#3090 = VECTOR('',#3091,1.);+#3091 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3092 = PCURVE('',#2424,#3093);+#3093 = DEFINITIONAL_REPRESENTATION('',(#3094),#3098);+#3094 = LINE('',#3095,#3096);+#3095 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#3096 = VECTOR('',#3097,1.);+#3097 = DIRECTION('',(0.,1.));+#3098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3099 = PCURVE('',#2396,#3100);+#3100 = DEFINITIONAL_REPRESENTATION('',(#3101),#3105);+#3101 = LINE('',#3102,#3103);+#3102 = CARTESIAN_POINT('',(0.5,-0.295));+#3103 = VECTOR('',#3104,1.);+#3104 = DIRECTION('',(0.,-1.));+#3105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3106 = ORIENTED_EDGE('',*,*,#2408,.F.);+#3107 = ADVANCED_FACE('',(#3108),#2396,.T.);+#3108 = FACE_BOUND('',#3109,.T.);+#3109 = EDGE_LOOP('',(#3110,#3111,#3132,#3133));+#3110 = ORIENTED_EDGE('',*,*,#2380,.F.);+#3111 = ORIENTED_EDGE('',*,*,#3112,.F.);+#3112 = EDGE_CURVE('',#2730,#2353,#3113,.T.);+#3113 = SURFACE_CURVE('',#3114,(#3118,#3125),.PCURVE_S1.);+#3114 = LINE('',#3115,#3116);+#3115 = CARTESIAN_POINT('',(-2.545,-4.43,0.105));+#3116 = VECTOR('',#3117,1.);+#3117 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3118 = PCURVE('',#2396,#3119);+#3119 = DEFINITIONAL_REPRESENTATION('',(#3120),#3124);+#3120 = LINE('',#3121,#3122);+#3121 = CARTESIAN_POINT('',(0.605,-0.295));+#3122 = VECTOR('',#3123,1.);+#3123 = DIRECTION('',(0.,-1.));+#3124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3125 = PCURVE('',#2368,#3126);+#3126 = DEFINITIONAL_REPRESENTATION('',(#3127),#3131);+#3127 = LINE('',#3128,#3129);+#3128 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#3129 = VECTOR('',#3130,1.);+#3130 = DIRECTION('',(0.,1.));+#3131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3132 = ORIENTED_EDGE('',*,*,#2752,.T.);+#3133 = ORIENTED_EDGE('',*,*,#3086,.T.);+#3134 = ADVANCED_FACE('',(#3135),#2368,.T.);+#3135 = FACE_BOUND('',#3136,.T.);+#3136 = EDGE_LOOP('',(#3137,#3158,#3159,#3160));+#3137 = ORIENTED_EDGE('',*,*,#3138,.T.);+#3138 = EDGE_CURVE('',#2324,#2706,#3139,.T.);+#3139 = SURFACE_CURVE('',#3140,(#3144,#3151),.PCURVE_S1.);+#3140 = LINE('',#3141,#3142);+#3141 = CARTESIAN_POINT('',(-2.16,-3.99529407561,0.105));+#3142 = VECTOR('',#3143,1.);+#3143 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3144 = PCURVE('',#2368,#3145);+#3145 = DEFINITIONAL_REPRESENTATION('',(#3146),#3150);+#3146 = LINE('',#3147,#3148);+#3147 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#3148 = VECTOR('',#3149,1.);+#3149 = DIRECTION('',(0.,-1.));+#3150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3151 = PCURVE('',#2340,#3152);+#3152 = DEFINITIONAL_REPRESENTATION('',(#3153),#3157);+#3153 = LINE('',#3154,#3155);+#3154 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#3155 = VECTOR('',#3156,1.);+#3156 = DIRECTION('',(0.,-1.));+#3157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3158 = ORIENTED_EDGE('',*,*,#2729,.T.);+#3159 = ORIENTED_EDGE('',*,*,#3112,.T.);+#3160 = ORIENTED_EDGE('',*,*,#2352,.F.);+#3161 = ADVANCED_FACE('',(#3162),#2340,.F.);+#3162 = FACE_BOUND('',#3163,.F.);+#3163 = EDGE_LOOP('',(#3164,#3165,#3186,#3187));+#3164 = ORIENTED_EDGE('',*,*,#2705,.T.);+#3165 = ORIENTED_EDGE('',*,*,#3166,.F.);+#3166 = EDGE_CURVE('',#2296,#2683,#3167,.T.);+#3167 = SURFACE_CURVE('',#3168,(#3172,#3179),.PCURVE_S1.);+#3168 = LINE('',#3169,#3170);+#3169 = CARTESIAN_POINT('',(-2.16,-3.958168154079,0.127361620474));+#3170 = VECTOR('',#3171,1.);+#3171 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3172 = PCURVE('',#2340,#3173);+#3173 = DEFINITIONAL_REPRESENTATION('',(#3174),#3178);+#3174 = LINE('',#3175,#3176);+#3175 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#3176 = VECTOR('',#3177,1.);+#3177 = DIRECTION('',(0.,-1.));+#3178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3179 = PCURVE('',#2311,#3180);+#3180 = DEFINITIONAL_REPRESENTATION('',(#3181),#3185);+#3181 = LINE('',#3182,#3183);+#3182 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#3183 = VECTOR('',#3184,1.);+#3184 = DIRECTION('',(-4.767113258106E-29,-1.));+#3185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3186 = ORIENTED_EDGE('',*,*,#2323,.F.);+#3187 = ORIENTED_EDGE('',*,*,#3138,.T.);+#3188 = ADVANCED_FACE('',(#3189),#2311,.T.);+#3189 = FACE_BOUND('',#3190,.T.);+#3190 = EDGE_LOOP('',(#3191,#3192,#3193,#3194));+#3191 = ORIENTED_EDGE('',*,*,#2924,.F.);+#3192 = ORIENTED_EDGE('',*,*,#2682,.T.);+#3193 = ORIENTED_EDGE('',*,*,#3166,.F.);+#3194 = ORIENTED_EDGE('',*,*,#2295,.F.);+#3195 = MANIFOLD_SOLID_BREP('',#3196);+#3196 = CLOSED_SHELL('',(#3197,#3327,#3403,#3741,#3790,#4056,#4083,#4110+ ,#4137,#4164,#4191,#4218,#4245,#4272,#4299,#4326));+#3197 = ADVANCED_FACE('',(#3198),#3213,.T.);+#3198 = FACE_BOUND('',#3199,.T.);+#3199 = EDGE_LOOP('',(#3200,#3240,#3268,#3301));+#3200 = ORIENTED_EDGE('',*,*,#3201,.T.);+#3201 = EDGE_CURVE('',#3202,#3204,#3206,.T.);+#3202 = VERTEX_POINT('',#3203);+#3203 = CARTESIAN_POINT('',(-1.66,-3.25,0.7825));+#3204 = VERTEX_POINT('',#3205);+#3205 = CARTESIAN_POINT('',(-1.66,-3.2,0.746007810594));+#3206 = SURFACE_CURVE('',#3207,(#3212,#3224),.PCURVE_S1.);+#3207 = CIRCLE('',#3208,5.25E-02);+#3208 = AXIS2_PLACEMENT_3D('',#3209,#3210,#3211);+#3209 = CARTESIAN_POINT('',(-1.66,-3.25,0.73));+#3210 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3211 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3212 = PCURVE('',#3213,#3218);+#3213 = CYLINDRICAL_SURFACE('',#3214,5.25E-02);+#3214 = AXIS2_PLACEMENT_3D('',#3215,#3216,#3217);+#3215 = CARTESIAN_POINT('',(-1.75,-3.25,0.73));+#3216 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3217 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3218 = DEFINITIONAL_REPRESENTATION('',(#3219),#3223);+#3219 = LINE('',#3220,#3221);+#3220 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#3221 = VECTOR('',#3222,1.);+#3222 = DIRECTION('',(-1.,-0.));+#3223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3224 = PCURVE('',#3225,#3230);+#3225 = PLANE('',#3226);+#3226 = AXIS2_PLACEMENT_3D('',#3227,#3228,#3229);+#3227 = CARTESIAN_POINT('',(-1.66,-3.861815252728,0.337140815196));+#3228 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3229 = DIRECTION('',(0.,0.,1.));+#3230 = DEFINITIONAL_REPRESENTATION('',(#3231),#3239);+#3231 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3232,#3233,#3234,#3235,+#3236,#3237,#3238),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3232 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#3233 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#3234 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#3235 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#3236 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#3237 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#3238 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#3239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3240 = ORIENTED_EDGE('',*,*,#3241,.F.);+#3241 = EDGE_CURVE('',#3242,#3204,#3244,.T.);+#3242 = VERTEX_POINT('',#3243);+#3243 = CARTESIAN_POINT('',(-1.84,-3.2,0.746007810594));+#3244 = SURFACE_CURVE('',#3245,(#3249,#3256),.PCURVE_S1.);+#3245 = LINE('',#3246,#3247);+#3246 = CARTESIAN_POINT('',(-1.75,-3.2,0.746007810594));+#3247 = VECTOR('',#3248,1.);+#3248 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3249 = PCURVE('',#3213,#3250);+#3250 = DEFINITIONAL_REPRESENTATION('',(#3251),#3255);+#3251 = LINE('',#3252,#3253);+#3252 = CARTESIAN_POINT('',(3.451437293332,0.));+#3253 = VECTOR('',#3254,1.);+#3254 = DIRECTION('',(-0.,1.));+#3255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3256 = PCURVE('',#3257,#3262);+#3257 = PLANE('',#3258);+#3258 = AXIS2_PLACEMENT_3D('',#3259,#3260,#3261);+#3259 = CARTESIAN_POINT('',(-2.34,-3.2,-0.5));+#3260 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3261 = DIRECTION('',(0.,0.,1.));+#3262 = DEFINITIONAL_REPRESENTATION('',(#3263),#3267);+#3263 = LINE('',#3264,#3265);+#3264 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#3265 = VECTOR('',#3266,1.);+#3266 = DIRECTION('',(0.,-1.));+#3267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3268 = ORIENTED_EDGE('',*,*,#3269,.F.);+#3269 = EDGE_CURVE('',#3270,#3242,#3272,.T.);+#3270 = VERTEX_POINT('',#3271);+#3271 = CARTESIAN_POINT('',(-1.84,-3.25,0.7825));+#3272 = SURFACE_CURVE('',#3273,(#3278,#3285),.PCURVE_S1.);+#3273 = CIRCLE('',#3274,5.25E-02);+#3274 = AXIS2_PLACEMENT_3D('',#3275,#3276,#3277);+#3275 = CARTESIAN_POINT('',(-1.84,-3.25,0.73));+#3276 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3277 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3278 = PCURVE('',#3213,#3279);+#3279 = DEFINITIONAL_REPRESENTATION('',(#3280),#3284);+#3280 = LINE('',#3281,#3282);+#3281 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#3282 = VECTOR('',#3283,1.);+#3283 = DIRECTION('',(-1.,0.));+#3284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3285 = PCURVE('',#3286,#3291);+#3286 = PLANE('',#3287);+#3287 = AXIS2_PLACEMENT_3D('',#3288,#3289,#3290);+#3288 = CARTESIAN_POINT('',(-1.84,-3.861815252728,0.337140815196));+#3289 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3290 = DIRECTION('',(0.,0.,1.));+#3291 = DEFINITIONAL_REPRESENTATION('',(#3292),#3300);+#3292 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3293,#3294,#3295,#3296,+#3297,#3298,#3299),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3293 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#3294 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#3295 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#3296 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#3297 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#3298 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#3299 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#3300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3301 = ORIENTED_EDGE('',*,*,#3302,.T.);+#3302 = EDGE_CURVE('',#3270,#3202,#3303,.T.);+#3303 = SURFACE_CURVE('',#3304,(#3308,#3315),.PCURVE_S1.);+#3304 = LINE('',#3305,#3306);+#3305 = CARTESIAN_POINT('',(-1.84,-3.25,0.7825));+#3306 = VECTOR('',#3307,1.);+#3307 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3308 = PCURVE('',#3213,#3309);+#3309 = DEFINITIONAL_REPRESENTATION('',(#3310),#3314);+#3310 = LINE('',#3311,#3312);+#3311 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#3312 = VECTOR('',#3313,1.);+#3313 = DIRECTION('',(0.,1.));+#3314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3315 = PCURVE('',#3316,#3321);+#3316 = PLANE('',#3317);+#3317 = AXIS2_PLACEMENT_3D('',#3318,#3319,#3320);+#3318 = CARTESIAN_POINT('',(-1.75,-3.25,0.7825));+#3319 = DIRECTION('',(0.,0.,1.));+#3320 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3321 = DEFINITIONAL_REPRESENTATION('',(#3322),#3326);+#3322 = LINE('',#3323,#3324);+#3323 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#3324 = VECTOR('',#3325,1.);+#3325 = DIRECTION('',(0.,1.));+#3326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3327 = ADVANCED_FACE('',(#3328),#3316,.T.);+#3328 = FACE_BOUND('',#3329,.T.);+#3329 = EDGE_LOOP('',(#3330,#3331,#3354,#3382));+#3330 = ORIENTED_EDGE('',*,*,#3302,.F.);+#3331 = ORIENTED_EDGE('',*,*,#3332,.T.);+#3332 = EDGE_CURVE('',#3270,#3333,#3335,.T.);+#3333 = VERTEX_POINT('',#3334);+#3334 = CARTESIAN_POINT('',(-1.84,-3.52308092439,0.7825));+#3335 = SURFACE_CURVE('',#3336,(#3340,#3347),.PCURVE_S1.);+#3336 = LINE('',#3337,#3338);+#3337 = CARTESIAN_POINT('',(-1.84,-3.25,0.7825));+#3338 = VECTOR('',#3339,1.);+#3339 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3340 = PCURVE('',#3316,#3341);+#3341 = DEFINITIONAL_REPRESENTATION('',(#3342),#3346);+#3342 = LINE('',#3343,#3344);+#3343 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#3344 = VECTOR('',#3345,1.);+#3345 = DIRECTION('',(1.,0.));+#3346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3347 = PCURVE('',#3286,#3348);+#3348 = DEFINITIONAL_REPRESENTATION('',(#3349),#3353);+#3349 = LINE('',#3350,#3351);+#3350 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#3351 = VECTOR('',#3352,1.);+#3352 = DIRECTION('',(0.,1.));+#3353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3354 = ORIENTED_EDGE('',*,*,#3355,.T.);+#3355 = EDGE_CURVE('',#3333,#3356,#3358,.T.);+#3356 = VERTEX_POINT('',#3357);+#3357 = CARTESIAN_POINT('',(-1.66,-3.52308092439,0.7825));+#3358 = SURFACE_CURVE('',#3359,(#3363,#3370),.PCURVE_S1.);+#3359 = LINE('',#3360,#3361);+#3360 = CARTESIAN_POINT('',(-1.84,-3.52308092439,0.7825));+#3361 = VECTOR('',#3362,1.);+#3362 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3363 = PCURVE('',#3316,#3364);+#3364 = DEFINITIONAL_REPRESENTATION('',(#3365),#3369);+#3365 = LINE('',#3366,#3367);+#3366 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#3367 = VECTOR('',#3368,1.);+#3368 = DIRECTION('',(0.,1.));+#3369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3370 = PCURVE('',#3371,#3376);+#3371 = CYLINDRICAL_SURFACE('',#3372,0.147);+#3372 = AXIS2_PLACEMENT_3D('',#3373,#3374,#3375);+#3373 = CARTESIAN_POINT('',(-1.75,-3.52308092439,0.6355));+#3374 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3375 = DIRECTION('',(0.,0.,1.));+#3376 = DEFINITIONAL_REPRESENTATION('',(#3377),#3381);+#3377 = LINE('',#3378,#3379);+#3378 = CARTESIAN_POINT('',(0.,-9.E-02));+#3379 = VECTOR('',#3380,1.);+#3380 = DIRECTION('',(-0.,1.));+#3381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3382 = ORIENTED_EDGE('',*,*,#3383,.F.);+#3383 = EDGE_CURVE('',#3202,#3356,#3384,.T.);+#3384 = SURFACE_CURVE('',#3385,(#3389,#3396),.PCURVE_S1.);+#3385 = LINE('',#3386,#3387);+#3386 = CARTESIAN_POINT('',(-1.66,-3.25,0.7825));+#3387 = VECTOR('',#3388,1.);+#3388 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3389 = PCURVE('',#3316,#3390);+#3390 = DEFINITIONAL_REPRESENTATION('',(#3391),#3395);+#3391 = LINE('',#3392,#3393);+#3392 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#3393 = VECTOR('',#3394,1.);+#3394 = DIRECTION('',(1.,0.));+#3395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3396 = PCURVE('',#3225,#3397);+#3397 = DEFINITIONAL_REPRESENTATION('',(#3398),#3402);+#3398 = LINE('',#3399,#3400);+#3399 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#3400 = VECTOR('',#3401,1.);+#3401 = DIRECTION('',(0.,1.));+#3402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3403 = ADVANCED_FACE('',(#3404),#3225,.T.);+#3404 = FACE_BOUND('',#3405,.T.);+#3405 = EDGE_LOOP('',(#3406,#3407,#3408,#3432,#3460,#3489,#3517,#3545,+ #3573,#3602,#3630,#3659,#3687,#3720));+#3406 = ORIENTED_EDGE('',*,*,#3201,.F.);+#3407 = ORIENTED_EDGE('',*,*,#3383,.T.);+#3408 = ORIENTED_EDGE('',*,*,#3409,.T.);+#3409 = EDGE_CURVE('',#3356,#3410,#3412,.T.);+#3410 = VERTEX_POINT('',#3411);+#3411 = CARTESIAN_POINT('',(-1.66,-3.653021649751,0.704234328342));+#3412 = SURFACE_CURVE('',#3413,(#3418,#3425),.PCURVE_S1.);+#3413 = CIRCLE('',#3414,0.147);+#3414 = AXIS2_PLACEMENT_3D('',#3415,#3416,#3417);+#3415 = CARTESIAN_POINT('',(-1.66,-3.52308092439,0.6355));+#3416 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#3417 = DIRECTION('',(0.,0.,1.));+#3418 = PCURVE('',#3225,#3419);+#3419 = DEFINITIONAL_REPRESENTATION('',(#3420),#3424);+#3420 = CIRCLE('',#3421,0.147);+#3421 = AXIS2_PLACEMENT_2D('',#3422,#3423);+#3422 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#3423 = DIRECTION('',(1.,0.));+#3424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3425 = PCURVE('',#3371,#3426);+#3426 = DEFINITIONAL_REPRESENTATION('',(#3427),#3431);+#3427 = LINE('',#3428,#3429);+#3428 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#3429 = VECTOR('',#3430,1.);+#3430 = DIRECTION('',(1.,-0.));+#3431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3432 = ORIENTED_EDGE('',*,*,#3433,.T.);+#3433 = EDGE_CURVE('',#3410,#3434,#3436,.T.);+#3434 = VERTEX_POINT('',#3435);+#3435 = CARTESIAN_POINT('',(-1.66,-3.958168154079,0.127361620474));+#3436 = SURFACE_CURVE('',#3437,(#3441,#3448),.PCURVE_S1.);+#3437 = LINE('',#3438,#3439);+#3438 = CARTESIAN_POINT('',(-1.66,-3.626407401915,0.754547974408));+#3439 = VECTOR('',#3440,1.);+#3440 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#3441 = PCURVE('',#3225,#3442);+#3442 = DEFINITIONAL_REPRESENTATION('',(#3443),#3447);+#3443 = LINE('',#3444,#3445);+#3444 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#3445 = VECTOR('',#3446,1.);+#3446 = DIRECTION('',(-0.883950512662,0.467580464908));+#3447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3448 = PCURVE('',#3449,#3454);+#3449 = PLANE('',#3450);+#3450 = AXIS2_PLACEMENT_3D('',#3451,#3452,#3453);+#3451 = CARTESIAN_POINT('',(-1.75,-3.653021649751,0.704234328342));+#3452 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#3453 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#3454 = DEFINITIONAL_REPRESENTATION('',(#3455),#3459);+#3455 = LINE('',#3456,#3457);+#3456 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#3457 = VECTOR('',#3458,1.);+#3458 = DIRECTION('',(1.,-2.399596746007E-32));+#3459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3460 = ORIENTED_EDGE('',*,*,#3461,.F.);+#3461 = EDGE_CURVE('',#3462,#3434,#3464,.T.);+#3462 = VERTEX_POINT('',#3463);+#3463 = CARTESIAN_POINT('',(-1.66,-3.99529407561,0.105));+#3464 = SURFACE_CURVE('',#3465,(#3470,#3477),.PCURVE_S1.);+#3465 = CIRCLE('',#3466,4.2E-02);+#3466 = AXIS2_PLACEMENT_3D('',#3467,#3468,#3469);+#3467 = CARTESIAN_POINT('',(-1.66,-3.99529407561,0.147));+#3468 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#3469 = DIRECTION('',(0.,0.,1.));+#3470 = PCURVE('',#3225,#3471);+#3471 = DEFINITIONAL_REPRESENTATION('',(#3472),#3476);+#3472 = CIRCLE('',#3473,4.2E-02);+#3473 = AXIS2_PLACEMENT_2D('',#3474,#3475);+#3474 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#3475 = DIRECTION('',(1.,0.));+#3476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3477 = PCURVE('',#3478,#3483);+#3478 = CYLINDRICAL_SURFACE('',#3479,4.2E-02);+#3479 = AXIS2_PLACEMENT_3D('',#3480,#3481,#3482);+#3480 = CARTESIAN_POINT('',(-1.75,-3.99529407561,0.147));+#3481 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3482 = DIRECTION('',(0.,0.,1.));+#3483 = DEFINITIONAL_REPRESENTATION('',(#3484),#3488);+#3484 = LINE('',#3485,#3486);+#3485 = CARTESIAN_POINT('',(-0.,9.E-02));+#3486 = VECTOR('',#3487,1.);+#3487 = DIRECTION('',(1.,-0.));+#3488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3489 = ORIENTED_EDGE('',*,*,#3490,.T.);+#3490 = EDGE_CURVE('',#3462,#3491,#3493,.T.);+#3491 = VERTEX_POINT('',#3492);+#3492 = CARTESIAN_POINT('',(-1.66,-4.43,0.105));+#3493 = SURFACE_CURVE('',#3494,(#3498,#3505),.PCURVE_S1.);+#3494 = LINE('',#3495,#3496);+#3495 = CARTESIAN_POINT('',(-1.66,-3.938375,0.105));+#3496 = VECTOR('',#3497,1.);+#3497 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3498 = PCURVE('',#3225,#3499);+#3499 = DEFINITIONAL_REPRESENTATION('',(#3500),#3504);+#3500 = LINE('',#3501,#3502);+#3501 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#3502 = VECTOR('',#3503,1.);+#3503 = DIRECTION('',(0.,1.));+#3504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3505 = PCURVE('',#3506,#3511);+#3506 = PLANE('',#3507);+#3507 = AXIS2_PLACEMENT_3D('',#3508,#3509,#3510);+#3508 = CARTESIAN_POINT('',(-1.75,-3.99529407561,0.105));+#3509 = DIRECTION('',(0.,0.,1.));+#3510 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3511 = DEFINITIONAL_REPRESENTATION('',(#3512),#3516);+#3512 = LINE('',#3513,#3514);+#3513 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#3514 = VECTOR('',#3515,1.);+#3515 = DIRECTION('',(1.,0.));+#3516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3517 = ORIENTED_EDGE('',*,*,#3518,.T.);+#3518 = EDGE_CURVE('',#3491,#3519,#3521,.T.);+#3519 = VERTEX_POINT('',#3520);+#3520 = CARTESIAN_POINT('',(-1.66,-4.43,0.));+#3521 = SURFACE_CURVE('',#3522,(#3526,#3533),.PCURVE_S1.);+#3522 = LINE('',#3523,#3524);+#3523 = CARTESIAN_POINT('',(-1.66,-4.43,-8.142959240193E-02));+#3524 = VECTOR('',#3525,1.);+#3525 = DIRECTION('',(0.,0.,-1.));+#3526 = PCURVE('',#3225,#3527);+#3527 = DEFINITIONAL_REPRESENTATION('',(#3528),#3532);+#3528 = LINE('',#3529,#3530);+#3529 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#3530 = VECTOR('',#3531,1.);+#3531 = DIRECTION('',(-1.,0.));+#3532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3533 = PCURVE('',#3534,#3539);+#3534 = PLANE('',#3535);+#3535 = AXIS2_PLACEMENT_3D('',#3536,#3537,#3538);+#3536 = CARTESIAN_POINT('',(-2.34,-4.43,-0.5));+#3537 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3538 = DIRECTION('',(0.,0.,1.));+#3539 = DEFINITIONAL_REPRESENTATION('',(#3540),#3544);+#3540 = LINE('',#3541,#3542);+#3541 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#3542 = VECTOR('',#3543,1.);+#3543 = DIRECTION('',(-1.,-0.));+#3544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3545 = ORIENTED_EDGE('',*,*,#3546,.F.);+#3546 = EDGE_CURVE('',#3547,#3519,#3549,.T.);+#3547 = VERTEX_POINT('',#3548);+#3548 = CARTESIAN_POINT('',(-1.66,-3.99529407561,0.));+#3549 = SURFACE_CURVE('',#3550,(#3554,#3561),.PCURVE_S1.);+#3550 = LINE('',#3551,#3552);+#3551 = CARTESIAN_POINT('',(-1.66,-3.938375,0.));+#3552 = VECTOR('',#3553,1.);+#3553 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3554 = PCURVE('',#3225,#3555);+#3555 = DEFINITIONAL_REPRESENTATION('',(#3556),#3560);+#3556 = LINE('',#3557,#3558);+#3557 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#3558 = VECTOR('',#3559,1.);+#3559 = DIRECTION('',(0.,1.));+#3560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3561 = PCURVE('',#3562,#3567);+#3562 = PLANE('',#3563);+#3563 = AXIS2_PLACEMENT_3D('',#3564,#3565,#3566);+#3564 = CARTESIAN_POINT('',(-1.75,-3.99529407561,0.));+#3565 = DIRECTION('',(0.,0.,1.));+#3566 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3567 = DEFINITIONAL_REPRESENTATION('',(#3568),#3572);+#3568 = LINE('',#3569,#3570);+#3569 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#3570 = VECTOR('',#3571,1.);+#3571 = DIRECTION('',(1.,0.));+#3572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3573 = ORIENTED_EDGE('',*,*,#3574,.T.);+#3574 = EDGE_CURVE('',#3547,#3575,#3577,.T.);+#3575 = VERTEX_POINT('',#3576);+#3576 = CARTESIAN_POINT('',(-1.66,-3.865353350249,7.826567165848E-02));+#3577 = SURFACE_CURVE('',#3578,(#3583,#3590),.PCURVE_S1.);+#3578 = CIRCLE('',#3579,0.147);+#3579 = AXIS2_PLACEMENT_3D('',#3580,#3581,#3582);+#3580 = CARTESIAN_POINT('',(-1.66,-3.99529407561,0.147));+#3581 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#3582 = DIRECTION('',(0.,0.,1.));+#3583 = PCURVE('',#3225,#3584);+#3584 = DEFINITIONAL_REPRESENTATION('',(#3585),#3589);+#3585 = CIRCLE('',#3586,0.147);+#3586 = AXIS2_PLACEMENT_2D('',#3587,#3588);+#3587 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#3588 = DIRECTION('',(1.,0.));+#3589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3590 = PCURVE('',#3591,#3596);+#3591 = CYLINDRICAL_SURFACE('',#3592,0.147);+#3592 = AXIS2_PLACEMENT_3D('',#3593,#3594,#3595);+#3593 = CARTESIAN_POINT('',(-1.75,-3.99529407561,0.147));+#3594 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3595 = DIRECTION('',(0.,0.,1.));+#3596 = DEFINITIONAL_REPRESENTATION('',(#3597),#3601);+#3597 = LINE('',#3598,#3599);+#3598 = CARTESIAN_POINT('',(-0.,9.E-02));+#3599 = VECTOR('',#3600,1.);+#3600 = DIRECTION('',(1.,-0.));+#3601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3602 = ORIENTED_EDGE('',*,*,#3603,.F.);+#3603 = EDGE_CURVE('',#3604,#3575,#3606,.T.);+#3604 = VERTEX_POINT('',#3605);+#3605 = CARTESIAN_POINT('',(-1.66,-3.560206845921,0.655138379526));+#3606 = SURFACE_CURVE('',#3607,(#3611,#3618),.PCURVE_S1.);+#3607 = LINE('',#3608,#3609);+#3608 = CARTESIAN_POINT('',(-1.66,-3.533592598085,0.705452025592));+#3609 = VECTOR('',#3610,1.);+#3610 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#3611 = PCURVE('',#3225,#3612);+#3612 = DEFINITIONAL_REPRESENTATION('',(#3613),#3617);+#3613 = LINE('',#3614,#3615);+#3614 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#3615 = VECTOR('',#3616,1.);+#3616 = DIRECTION('',(-0.883950512662,0.467580464908));+#3617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3618 = PCURVE('',#3619,#3624);+#3619 = PLANE('',#3620);+#3620 = AXIS2_PLACEMENT_3D('',#3621,#3622,#3623);+#3621 = CARTESIAN_POINT('',(-1.75,-3.560206845921,0.655138379526));+#3622 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#3623 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#3624 = DEFINITIONAL_REPRESENTATION('',(#3625),#3629);+#3625 = LINE('',#3626,#3627);+#3626 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#3627 = VECTOR('',#3628,1.);+#3628 = DIRECTION('',(1.,-2.399596746007E-32));+#3629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3630 = ORIENTED_EDGE('',*,*,#3631,.F.);+#3631 = EDGE_CURVE('',#3632,#3604,#3634,.T.);+#3632 = VERTEX_POINT('',#3633);+#3633 = CARTESIAN_POINT('',(-1.66,-3.52308092439,0.6775));+#3634 = SURFACE_CURVE('',#3635,(#3640,#3647),.PCURVE_S1.);+#3635 = CIRCLE('',#3636,4.2E-02);+#3636 = AXIS2_PLACEMENT_3D('',#3637,#3638,#3639);+#3637 = CARTESIAN_POINT('',(-1.66,-3.52308092439,0.6355));+#3638 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#3639 = DIRECTION('',(0.,0.,1.));+#3640 = PCURVE('',#3225,#3641);+#3641 = DEFINITIONAL_REPRESENTATION('',(#3642),#3646);+#3642 = CIRCLE('',#3643,4.2E-02);+#3643 = AXIS2_PLACEMENT_2D('',#3644,#3645);+#3644 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#3645 = DIRECTION('',(1.,0.));+#3646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3647 = PCURVE('',#3648,#3653);+#3648 = CYLINDRICAL_SURFACE('',#3649,4.2E-02);+#3649 = AXIS2_PLACEMENT_3D('',#3650,#3651,#3652);+#3650 = CARTESIAN_POINT('',(-1.75,-3.52308092439,0.6355));+#3651 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3652 = DIRECTION('',(0.,0.,1.));+#3653 = DEFINITIONAL_REPRESENTATION('',(#3654),#3658);+#3654 = LINE('',#3655,#3656);+#3655 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#3656 = VECTOR('',#3657,1.);+#3657 = DIRECTION('',(1.,-0.));+#3658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3659 = ORIENTED_EDGE('',*,*,#3660,.F.);+#3660 = EDGE_CURVE('',#3661,#3632,#3663,.T.);+#3661 = VERTEX_POINT('',#3662);+#3662 = CARTESIAN_POINT('',(-1.66,-3.25,0.6775));+#3663 = SURFACE_CURVE('',#3664,(#3668,#3675),.PCURVE_S1.);+#3664 = LINE('',#3665,#3666);+#3665 = CARTESIAN_POINT('',(-1.66,-3.25,0.6775));+#3666 = VECTOR('',#3667,1.);+#3667 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3668 = PCURVE('',#3225,#3669);+#3669 = DEFINITIONAL_REPRESENTATION('',(#3670),#3674);+#3670 = LINE('',#3671,#3672);+#3671 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#3672 = VECTOR('',#3673,1.);+#3673 = DIRECTION('',(0.,1.));+#3674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3675 = PCURVE('',#3676,#3681);+#3676 = PLANE('',#3677);+#3677 = AXIS2_PLACEMENT_3D('',#3678,#3679,#3680);+#3678 = CARTESIAN_POINT('',(-1.75,-3.25,0.6775));+#3679 = DIRECTION('',(0.,0.,1.));+#3680 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3681 = DEFINITIONAL_REPRESENTATION('',(#3682),#3686);+#3682 = LINE('',#3683,#3684);+#3683 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#3684 = VECTOR('',#3685,1.);+#3685 = DIRECTION('',(1.,0.));+#3686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3687 = ORIENTED_EDGE('',*,*,#3688,.F.);+#3688 = EDGE_CURVE('',#3689,#3661,#3691,.T.);+#3689 = VERTEX_POINT('',#3690);+#3690 = CARTESIAN_POINT('',(-1.66,-3.2,0.713992189406));+#3691 = SURFACE_CURVE('',#3692,(#3697,#3708),.PCURVE_S1.);+#3692 = CIRCLE('',#3693,5.25E-02);+#3693 = AXIS2_PLACEMENT_3D('',#3694,#3695,#3696);+#3694 = CARTESIAN_POINT('',(-1.66,-3.25,0.73));+#3695 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#3696 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3697 = PCURVE('',#3225,#3698);+#3698 = DEFINITIONAL_REPRESENTATION('',(#3699),#3707);+#3699 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#3700,#3701,#3702,#3703,+#3704,#3705,#3706),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#3700 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#3701 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#3702 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#3703 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#3704 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#3705 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#3706 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#3707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3708 = PCURVE('',#3709,#3714);+#3709 = CYLINDRICAL_SURFACE('',#3710,5.25E-02);+#3710 = AXIS2_PLACEMENT_3D('',#3711,#3712,#3713);+#3711 = CARTESIAN_POINT('',(-1.75,-3.25,0.73));+#3712 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3713 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3714 = DEFINITIONAL_REPRESENTATION('',(#3715),#3719);+#3715 = LINE('',#3716,#3717);+#3716 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#3717 = VECTOR('',#3718,1.);+#3718 = DIRECTION('',(-1.,-0.));+#3719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3720 = ORIENTED_EDGE('',*,*,#3721,.F.);+#3721 = EDGE_CURVE('',#3204,#3689,#3722,.T.);+#3722 = SURFACE_CURVE('',#3723,(#3727,#3734),.PCURVE_S1.);+#3723 = LINE('',#3724,#3725);+#3724 = CARTESIAN_POINT('',(-1.66,-3.2,-8.142959240193E-02));+#3725 = VECTOR('',#3726,1.);+#3726 = DIRECTION('',(0.,0.,-1.));+#3727 = PCURVE('',#3225,#3728);+#3728 = DEFINITIONAL_REPRESENTATION('',(#3729),#3733);+#3729 = LINE('',#3730,#3731);+#3730 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#3731 = VECTOR('',#3732,1.);+#3732 = DIRECTION('',(-1.,0.));+#3733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3734 = PCURVE('',#3257,#3735);+#3735 = DEFINITIONAL_REPRESENTATION('',(#3736),#3740);+#3736 = LINE('',#3737,#3738);+#3737 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#3738 = VECTOR('',#3739,1.);+#3739 = DIRECTION('',(-1.,-0.));+#3740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3741 = ADVANCED_FACE('',(#3742),#3257,.F.);+#3742 = FACE_BOUND('',#3743,.F.);+#3743 = EDGE_LOOP('',(#3744,#3745,#3768,#3789));+#3744 = ORIENTED_EDGE('',*,*,#3241,.F.);+#3745 = ORIENTED_EDGE('',*,*,#3746,.T.);+#3746 = EDGE_CURVE('',#3242,#3747,#3749,.T.);+#3747 = VERTEX_POINT('',#3748);+#3748 = CARTESIAN_POINT('',(-1.84,-3.2,0.713992189406));+#3749 = SURFACE_CURVE('',#3750,(#3754,#3761),.PCURVE_S1.);+#3750 = LINE('',#3751,#3752);+#3751 = CARTESIAN_POINT('',(-1.84,-3.2,-8.142959240193E-02));+#3752 = VECTOR('',#3753,1.);+#3753 = DIRECTION('',(0.,0.,-1.));+#3754 = PCURVE('',#3257,#3755);+#3755 = DEFINITIONAL_REPRESENTATION('',(#3756),#3760);+#3756 = LINE('',#3757,#3758);+#3757 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#3758 = VECTOR('',#3759,1.);+#3759 = DIRECTION('',(-1.,-0.));+#3760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3761 = PCURVE('',#3286,#3762);+#3762 = DEFINITIONAL_REPRESENTATION('',(#3763),#3767);+#3763 = LINE('',#3764,#3765);+#3764 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#3765 = VECTOR('',#3766,1.);+#3766 = DIRECTION('',(-1.,0.));+#3767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3768 = ORIENTED_EDGE('',*,*,#3769,.T.);+#3769 = EDGE_CURVE('',#3747,#3689,#3770,.T.);+#3770 = SURFACE_CURVE('',#3771,(#3775,#3782),.PCURVE_S1.);+#3771 = LINE('',#3772,#3773);+#3772 = CARTESIAN_POINT('',(-1.75,-3.2,0.713992189406));+#3773 = VECTOR('',#3774,1.);+#3774 = DIRECTION('',(1.,1.110223024625E-16,0.));+#3775 = PCURVE('',#3257,#3776);+#3776 = DEFINITIONAL_REPRESENTATION('',(#3777),#3781);+#3777 = LINE('',#3778,#3779);+#3778 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#3779 = VECTOR('',#3780,1.);+#3780 = DIRECTION('',(0.,-1.));+#3781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3782 = PCURVE('',#3709,#3783);+#3783 = DEFINITIONAL_REPRESENTATION('',(#3784),#3788);+#3784 = LINE('',#3785,#3786);+#3785 = CARTESIAN_POINT('',(2.831748013849,0.));+#3786 = VECTOR('',#3787,1.);+#3787 = DIRECTION('',(-0.,1.));+#3788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3789 = ORIENTED_EDGE('',*,*,#3721,.F.);+#3790 = ADVANCED_FACE('',(#3791),#3286,.F.);+#3791 = FACE_BOUND('',#3792,.F.);+#3792 = EDGE_LOOP('',(#3793,#3794,#3795,#3819,#3842,#3866,#3889,#3912,+ #3935,#3959,#3982,#4006,#4029,#4055));+#3793 = ORIENTED_EDGE('',*,*,#3269,.F.);+#3794 = ORIENTED_EDGE('',*,*,#3332,.T.);+#3795 = ORIENTED_EDGE('',*,*,#3796,.T.);+#3796 = EDGE_CURVE('',#3333,#3797,#3799,.T.);+#3797 = VERTEX_POINT('',#3798);+#3798 = CARTESIAN_POINT('',(-1.84,-3.653021649751,0.704234328342));+#3799 = SURFACE_CURVE('',#3800,(#3805,#3812),.PCURVE_S1.);+#3800 = CIRCLE('',#3801,0.147);+#3801 = AXIS2_PLACEMENT_3D('',#3802,#3803,#3804);+#3802 = CARTESIAN_POINT('',(-1.84,-3.52308092439,0.6355));+#3803 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#3804 = DIRECTION('',(0.,0.,1.));+#3805 = PCURVE('',#3286,#3806);+#3806 = DEFINITIONAL_REPRESENTATION('',(#3807),#3811);+#3807 = CIRCLE('',#3808,0.147);+#3808 = AXIS2_PLACEMENT_2D('',#3809,#3810);+#3809 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#3810 = DIRECTION('',(1.,0.));+#3811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3812 = PCURVE('',#3371,#3813);+#3813 = DEFINITIONAL_REPRESENTATION('',(#3814),#3818);+#3814 = LINE('',#3815,#3816);+#3815 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#3816 = VECTOR('',#3817,1.);+#3817 = DIRECTION('',(1.,0.));+#3818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3819 = ORIENTED_EDGE('',*,*,#3820,.T.);+#3820 = EDGE_CURVE('',#3797,#3821,#3823,.T.);+#3821 = VERTEX_POINT('',#3822);+#3822 = CARTESIAN_POINT('',(-1.84,-3.958168154079,0.127361620474));+#3823 = SURFACE_CURVE('',#3824,(#3828,#3835),.PCURVE_S1.);+#3824 = LINE('',#3825,#3826);+#3825 = CARTESIAN_POINT('',(-1.84,-3.626407401915,0.754547974408));+#3826 = VECTOR('',#3827,1.);+#3827 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#3828 = PCURVE('',#3286,#3829);+#3829 = DEFINITIONAL_REPRESENTATION('',(#3830),#3834);+#3830 = LINE('',#3831,#3832);+#3831 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#3832 = VECTOR('',#3833,1.);+#3833 = DIRECTION('',(-0.883950512662,0.467580464908));+#3834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3835 = PCURVE('',#3449,#3836);+#3836 = DEFINITIONAL_REPRESENTATION('',(#3837),#3841);+#3837 = LINE('',#3838,#3839);+#3838 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#3839 = VECTOR('',#3840,1.);+#3840 = DIRECTION('',(1.,-2.399596746007E-32));+#3841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3842 = ORIENTED_EDGE('',*,*,#3843,.F.);+#3843 = EDGE_CURVE('',#3844,#3821,#3846,.T.);+#3844 = VERTEX_POINT('',#3845);+#3845 = CARTESIAN_POINT('',(-1.84,-3.99529407561,0.105));+#3846 = SURFACE_CURVE('',#3847,(#3852,#3859),.PCURVE_S1.);+#3847 = CIRCLE('',#3848,4.2E-02);+#3848 = AXIS2_PLACEMENT_3D('',#3849,#3850,#3851);+#3849 = CARTESIAN_POINT('',(-1.84,-3.99529407561,0.147));+#3850 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#3851 = DIRECTION('',(0.,0.,1.));+#3852 = PCURVE('',#3286,#3853);+#3853 = DEFINITIONAL_REPRESENTATION('',(#3854),#3858);+#3854 = CIRCLE('',#3855,4.2E-02);+#3855 = AXIS2_PLACEMENT_2D('',#3856,#3857);+#3856 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#3857 = DIRECTION('',(1.,0.));+#3858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3859 = PCURVE('',#3478,#3860);+#3860 = DEFINITIONAL_REPRESENTATION('',(#3861),#3865);+#3861 = LINE('',#3862,#3863);+#3862 = CARTESIAN_POINT('',(0.,-9.E-02));+#3863 = VECTOR('',#3864,1.);+#3864 = DIRECTION('',(1.,0.));+#3865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3866 = ORIENTED_EDGE('',*,*,#3867,.T.);+#3867 = EDGE_CURVE('',#3844,#3868,#3870,.T.);+#3868 = VERTEX_POINT('',#3869);+#3869 = CARTESIAN_POINT('',(-1.84,-4.43,0.105));+#3870 = SURFACE_CURVE('',#3871,(#3875,#3882),.PCURVE_S1.);+#3871 = LINE('',#3872,#3873);+#3872 = CARTESIAN_POINT('',(-1.84,-3.938375,0.105));+#3873 = VECTOR('',#3874,1.);+#3874 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3875 = PCURVE('',#3286,#3876);+#3876 = DEFINITIONAL_REPRESENTATION('',(#3877),#3881);+#3877 = LINE('',#3878,#3879);+#3878 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#3879 = VECTOR('',#3880,1.);+#3880 = DIRECTION('',(0.,1.));+#3881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3882 = PCURVE('',#3506,#3883);+#3883 = DEFINITIONAL_REPRESENTATION('',(#3884),#3888);+#3884 = LINE('',#3885,#3886);+#3885 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#3886 = VECTOR('',#3887,1.);+#3887 = DIRECTION('',(1.,0.));+#3888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3889 = ORIENTED_EDGE('',*,*,#3890,.T.);+#3890 = EDGE_CURVE('',#3868,#3891,#3893,.T.);+#3891 = VERTEX_POINT('',#3892);+#3892 = CARTESIAN_POINT('',(-1.84,-4.43,0.));+#3893 = SURFACE_CURVE('',#3894,(#3898,#3905),.PCURVE_S1.);+#3894 = LINE('',#3895,#3896);+#3895 = CARTESIAN_POINT('',(-1.84,-4.43,-8.142959240193E-02));+#3896 = VECTOR('',#3897,1.);+#3897 = DIRECTION('',(0.,0.,-1.));+#3898 = PCURVE('',#3286,#3899);+#3899 = DEFINITIONAL_REPRESENTATION('',(#3900),#3904);+#3900 = LINE('',#3901,#3902);+#3901 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#3902 = VECTOR('',#3903,1.);+#3903 = DIRECTION('',(-1.,0.));+#3904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3905 = PCURVE('',#3534,#3906);+#3906 = DEFINITIONAL_REPRESENTATION('',(#3907),#3911);+#3907 = LINE('',#3908,#3909);+#3908 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#3909 = VECTOR('',#3910,1.);+#3910 = DIRECTION('',(-1.,-0.));+#3911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3912 = ORIENTED_EDGE('',*,*,#3913,.F.);+#3913 = EDGE_CURVE('',#3914,#3891,#3916,.T.);+#3914 = VERTEX_POINT('',#3915);+#3915 = CARTESIAN_POINT('',(-1.84,-3.99529407561,0.));+#3916 = SURFACE_CURVE('',#3917,(#3921,#3928),.PCURVE_S1.);+#3917 = LINE('',#3918,#3919);+#3918 = CARTESIAN_POINT('',(-1.84,-3.938375,0.));+#3919 = VECTOR('',#3920,1.);+#3920 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#3921 = PCURVE('',#3286,#3922);+#3922 = DEFINITIONAL_REPRESENTATION('',(#3923),#3927);+#3923 = LINE('',#3924,#3925);+#3924 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#3925 = VECTOR('',#3926,1.);+#3926 = DIRECTION('',(0.,1.));+#3927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3928 = PCURVE('',#3562,#3929);+#3929 = DEFINITIONAL_REPRESENTATION('',(#3930),#3934);+#3930 = LINE('',#3931,#3932);+#3931 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#3932 = VECTOR('',#3933,1.);+#3933 = DIRECTION('',(1.,0.));+#3934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3935 = ORIENTED_EDGE('',*,*,#3936,.T.);+#3936 = EDGE_CURVE('',#3914,#3937,#3939,.T.);+#3937 = VERTEX_POINT('',#3938);+#3938 = CARTESIAN_POINT('',(-1.84,-3.865353350249,7.826567165848E-02));+#3939 = SURFACE_CURVE('',#3940,(#3945,#3952),.PCURVE_S1.);+#3940 = CIRCLE('',#3941,0.147);+#3941 = AXIS2_PLACEMENT_3D('',#3942,#3943,#3944);+#3942 = CARTESIAN_POINT('',(-1.84,-3.99529407561,0.147));+#3943 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#3944 = DIRECTION('',(0.,0.,1.));+#3945 = PCURVE('',#3286,#3946);+#3946 = DEFINITIONAL_REPRESENTATION('',(#3947),#3951);+#3947 = CIRCLE('',#3948,0.147);+#3948 = AXIS2_PLACEMENT_2D('',#3949,#3950);+#3949 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#3950 = DIRECTION('',(1.,0.));+#3951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3952 = PCURVE('',#3591,#3953);+#3953 = DEFINITIONAL_REPRESENTATION('',(#3954),#3958);+#3954 = LINE('',#3955,#3956);+#3955 = CARTESIAN_POINT('',(0.,-9.E-02));+#3956 = VECTOR('',#3957,1.);+#3957 = DIRECTION('',(1.,0.));+#3958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3959 = ORIENTED_EDGE('',*,*,#3960,.F.);+#3960 = EDGE_CURVE('',#3961,#3937,#3963,.T.);+#3961 = VERTEX_POINT('',#3962);+#3962 = CARTESIAN_POINT('',(-1.84,-3.560206845921,0.655138379526));+#3963 = SURFACE_CURVE('',#3964,(#3968,#3975),.PCURVE_S1.);+#3964 = LINE('',#3965,#3966);+#3965 = CARTESIAN_POINT('',(-1.84,-3.533592598085,0.705452025592));+#3966 = VECTOR('',#3967,1.);+#3967 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#3968 = PCURVE('',#3286,#3969);+#3969 = DEFINITIONAL_REPRESENTATION('',(#3970),#3974);+#3970 = LINE('',#3971,#3972);+#3971 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#3972 = VECTOR('',#3973,1.);+#3973 = DIRECTION('',(-0.883950512662,0.467580464908));+#3974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3975 = PCURVE('',#3619,#3976);+#3976 = DEFINITIONAL_REPRESENTATION('',(#3977),#3981);+#3977 = LINE('',#3978,#3979);+#3978 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#3979 = VECTOR('',#3980,1.);+#3980 = DIRECTION('',(1.,-2.399596746007E-32));+#3981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3982 = ORIENTED_EDGE('',*,*,#3983,.F.);+#3983 = EDGE_CURVE('',#3984,#3961,#3986,.T.);+#3984 = VERTEX_POINT('',#3985);+#3985 = CARTESIAN_POINT('',(-1.84,-3.52308092439,0.6775));+#3986 = SURFACE_CURVE('',#3987,(#3992,#3999),.PCURVE_S1.);+#3987 = CIRCLE('',#3988,4.2E-02);+#3988 = AXIS2_PLACEMENT_3D('',#3989,#3990,#3991);+#3989 = CARTESIAN_POINT('',(-1.84,-3.52308092439,0.6355));+#3990 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#3991 = DIRECTION('',(0.,0.,1.));+#3992 = PCURVE('',#3286,#3993);+#3993 = DEFINITIONAL_REPRESENTATION('',(#3994),#3998);+#3994 = CIRCLE('',#3995,4.2E-02);+#3995 = AXIS2_PLACEMENT_2D('',#3996,#3997);+#3996 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#3997 = DIRECTION('',(1.,0.));+#3998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3999 = PCURVE('',#3648,#4000);+#4000 = DEFINITIONAL_REPRESENTATION('',(#4001),#4005);+#4001 = LINE('',#4002,#4003);+#4002 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#4003 = VECTOR('',#4004,1.);+#4004 = DIRECTION('',(1.,0.));+#4005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4006 = ORIENTED_EDGE('',*,*,#4007,.F.);+#4007 = EDGE_CURVE('',#4008,#3984,#4010,.T.);+#4008 = VERTEX_POINT('',#4009);+#4009 = CARTESIAN_POINT('',(-1.84,-3.25,0.6775));+#4010 = SURFACE_CURVE('',#4011,(#4015,#4022),.PCURVE_S1.);+#4011 = LINE('',#4012,#4013);+#4012 = CARTESIAN_POINT('',(-1.84,-3.25,0.6775));+#4013 = VECTOR('',#4014,1.);+#4014 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4015 = PCURVE('',#3286,#4016);+#4016 = DEFINITIONAL_REPRESENTATION('',(#4017),#4021);+#4017 = LINE('',#4018,#4019);+#4018 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#4019 = VECTOR('',#4020,1.);+#4020 = DIRECTION('',(0.,1.));+#4021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4022 = PCURVE('',#3676,#4023);+#4023 = DEFINITIONAL_REPRESENTATION('',(#4024),#4028);+#4024 = LINE('',#4025,#4026);+#4025 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#4026 = VECTOR('',#4027,1.);+#4027 = DIRECTION('',(1.,0.));+#4028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4029 = ORIENTED_EDGE('',*,*,#4030,.F.);+#4030 = EDGE_CURVE('',#3747,#4008,#4031,.T.);+#4031 = SURFACE_CURVE('',#4032,(#4037,#4048),.PCURVE_S1.);+#4032 = CIRCLE('',#4033,5.25E-02);+#4033 = AXIS2_PLACEMENT_3D('',#4034,#4035,#4036);+#4034 = CARTESIAN_POINT('',(-1.84,-3.25,0.73));+#4035 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4036 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4037 = PCURVE('',#3286,#4038);+#4038 = DEFINITIONAL_REPRESENTATION('',(#4039),#4047);+#4039 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4040,#4041,#4042,#4043,+#4044,#4045,#4046),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4040 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#4041 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#4042 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#4043 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#4044 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#4045 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#4046 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#4047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4048 = PCURVE('',#3709,#4049);+#4049 = DEFINITIONAL_REPRESENTATION('',(#4050),#4054);+#4050 = LINE('',#4051,#4052);+#4051 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#4052 = VECTOR('',#4053,1.);+#4053 = DIRECTION('',(-1.,0.));+#4054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4055 = ORIENTED_EDGE('',*,*,#3746,.F.);+#4056 = ADVANCED_FACE('',(#4057),#3371,.T.);+#4057 = FACE_BOUND('',#4058,.T.);+#4058 = EDGE_LOOP('',(#4059,#4060,#4061,#4082));+#4059 = ORIENTED_EDGE('',*,*,#3355,.F.);+#4060 = ORIENTED_EDGE('',*,*,#3796,.T.);+#4061 = ORIENTED_EDGE('',*,*,#4062,.T.);+#4062 = EDGE_CURVE('',#3797,#3410,#4063,.T.);+#4063 = SURFACE_CURVE('',#4064,(#4068,#4075),.PCURVE_S1.);+#4064 = LINE('',#4065,#4066);+#4065 = CARTESIAN_POINT('',(-1.84,-3.653021649751,0.704234328342));+#4066 = VECTOR('',#4067,1.);+#4067 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4068 = PCURVE('',#3371,#4069);+#4069 = DEFINITIONAL_REPRESENTATION('',(#4070),#4074);+#4070 = LINE('',#4071,#4072);+#4071 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#4072 = VECTOR('',#4073,1.);+#4073 = DIRECTION('',(-0.,1.));+#4074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4075 = PCURVE('',#3449,#4076);+#4076 = DEFINITIONAL_REPRESENTATION('',(#4077),#4081);+#4077 = LINE('',#4078,#4079);+#4078 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#4079 = VECTOR('',#4080,1.);+#4080 = DIRECTION('',(4.767113258106E-29,1.));+#4081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4082 = ORIENTED_EDGE('',*,*,#3409,.F.);+#4083 = ADVANCED_FACE('',(#4084),#3709,.T.);+#4084 = FACE_BOUND('',#4085,.T.);+#4085 = EDGE_LOOP('',(#4086,#4087,#4108,#4109));+#4086 = ORIENTED_EDGE('',*,*,#3688,.T.);+#4087 = ORIENTED_EDGE('',*,*,#4088,.T.);+#4088 = EDGE_CURVE('',#3661,#4008,#4089,.T.);+#4089 = SURFACE_CURVE('',#4090,(#4094,#4101),.PCURVE_S1.);+#4090 = LINE('',#4091,#4092);+#4091 = CARTESIAN_POINT('',(-1.66,-3.25,0.6775));+#4092 = VECTOR('',#4093,1.);+#4093 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4094 = PCURVE('',#3709,#4095);+#4095 = DEFINITIONAL_REPRESENTATION('',(#4096),#4100);+#4096 = LINE('',#4097,#4098);+#4097 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#4098 = VECTOR('',#4099,1.);+#4099 = DIRECTION('',(-0.,-1.));+#4100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4101 = PCURVE('',#3676,#4102);+#4102 = DEFINITIONAL_REPRESENTATION('',(#4103),#4107);+#4103 = LINE('',#4104,#4105);+#4104 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#4105 = VECTOR('',#4106,1.);+#4106 = DIRECTION('',(0.,-1.));+#4107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4108 = ORIENTED_EDGE('',*,*,#4030,.F.);+#4109 = ORIENTED_EDGE('',*,*,#3769,.T.);+#4110 = ADVANCED_FACE('',(#4111),#3676,.F.);+#4111 = FACE_BOUND('',#4112,.F.);+#4112 = EDGE_LOOP('',(#4113,#4114,#4135,#4136));+#4113 = ORIENTED_EDGE('',*,*,#4007,.T.);+#4114 = ORIENTED_EDGE('',*,*,#4115,.F.);+#4115 = EDGE_CURVE('',#3632,#3984,#4116,.T.);+#4116 = SURFACE_CURVE('',#4117,(#4121,#4128),.PCURVE_S1.);+#4117 = LINE('',#4118,#4119);+#4118 = CARTESIAN_POINT('',(-1.66,-3.52308092439,0.6775));+#4119 = VECTOR('',#4120,1.);+#4120 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4121 = PCURVE('',#3676,#4122);+#4122 = DEFINITIONAL_REPRESENTATION('',(#4123),#4127);+#4123 = LINE('',#4124,#4125);+#4124 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#4125 = VECTOR('',#4126,1.);+#4126 = DIRECTION('',(0.,-1.));+#4127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4128 = PCURVE('',#3648,#4129);+#4129 = DEFINITIONAL_REPRESENTATION('',(#4130),#4134);+#4130 = LINE('',#4131,#4132);+#4131 = CARTESIAN_POINT('',(0.,9.E-02));+#4132 = VECTOR('',#4133,1.);+#4133 = DIRECTION('',(0.,-1.));+#4134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4135 = ORIENTED_EDGE('',*,*,#3660,.F.);+#4136 = ORIENTED_EDGE('',*,*,#4088,.T.);+#4137 = ADVANCED_FACE('',(#4138),#3648,.F.);+#4138 = FACE_BOUND('',#4139,.F.);+#4139 = EDGE_LOOP('',(#4140,#4141,#4162,#4163));+#4140 = ORIENTED_EDGE('',*,*,#3983,.T.);+#4141 = ORIENTED_EDGE('',*,*,#4142,.F.);+#4142 = EDGE_CURVE('',#3604,#3961,#4143,.T.);+#4143 = SURFACE_CURVE('',#4144,(#4148,#4155),.PCURVE_S1.);+#4144 = LINE('',#4145,#4146);+#4145 = CARTESIAN_POINT('',(-1.66,-3.560206845921,0.655138379526));+#4146 = VECTOR('',#4147,1.);+#4147 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4148 = PCURVE('',#3648,#4149);+#4149 = DEFINITIONAL_REPRESENTATION('',(#4150),#4154);+#4150 = LINE('',#4151,#4152);+#4151 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#4152 = VECTOR('',#4153,1.);+#4153 = DIRECTION('',(0.,-1.));+#4154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4155 = PCURVE('',#3619,#4156);+#4156 = DEFINITIONAL_REPRESENTATION('',(#4157),#4161);+#4157 = LINE('',#4158,#4159);+#4158 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#4159 = VECTOR('',#4160,1.);+#4160 = DIRECTION('',(-4.767113258106E-29,-1.));+#4161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4162 = ORIENTED_EDGE('',*,*,#3631,.F.);+#4163 = ORIENTED_EDGE('',*,*,#4115,.T.);+#4164 = ADVANCED_FACE('',(#4165),#3619,.F.);+#4165 = FACE_BOUND('',#4166,.F.);+#4166 = EDGE_LOOP('',(#4167,#4168,#4189,#4190));+#4167 = ORIENTED_EDGE('',*,*,#3960,.T.);+#4168 = ORIENTED_EDGE('',*,*,#4169,.F.);+#4169 = EDGE_CURVE('',#3575,#3937,#4170,.T.);+#4170 = SURFACE_CURVE('',#4171,(#4175,#4182),.PCURVE_S1.);+#4171 = LINE('',#4172,#4173);+#4172 = CARTESIAN_POINT('',(-1.66,-3.865353350249,7.826567165848E-02));+#4173 = VECTOR('',#4174,1.);+#4174 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4175 = PCURVE('',#3619,#4176);+#4176 = DEFINITIONAL_REPRESENTATION('',(#4177),#4181);+#4177 = LINE('',#4178,#4179);+#4178 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#4179 = VECTOR('',#4180,1.);+#4180 = DIRECTION('',(-4.767113258106E-29,-1.));+#4181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4182 = PCURVE('',#3591,#4183);+#4183 = DEFINITIONAL_REPRESENTATION('',(#4184),#4188);+#4184 = LINE('',#4185,#4186);+#4185 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#4186 = VECTOR('',#4187,1.);+#4187 = DIRECTION('',(0.,-1.));+#4188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4189 = ORIENTED_EDGE('',*,*,#3603,.F.);+#4190 = ORIENTED_EDGE('',*,*,#4142,.T.);+#4191 = ADVANCED_FACE('',(#4192),#3591,.T.);+#4192 = FACE_BOUND('',#4193,.T.);+#4193 = EDGE_LOOP('',(#4194,#4195,#4196,#4197));+#4194 = ORIENTED_EDGE('',*,*,#3936,.T.);+#4195 = ORIENTED_EDGE('',*,*,#4169,.F.);+#4196 = ORIENTED_EDGE('',*,*,#3574,.F.);+#4197 = ORIENTED_EDGE('',*,*,#4198,.T.);+#4198 = EDGE_CURVE('',#3547,#3914,#4199,.T.);+#4199 = SURFACE_CURVE('',#4200,(#4204,#4211),.PCURVE_S1.);+#4200 = LINE('',#4201,#4202);+#4201 = CARTESIAN_POINT('',(-1.66,-3.99529407561,0.));+#4202 = VECTOR('',#4203,1.);+#4203 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4204 = PCURVE('',#3591,#4205);+#4205 = DEFINITIONAL_REPRESENTATION('',(#4206),#4210);+#4206 = LINE('',#4207,#4208);+#4207 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#4208 = VECTOR('',#4209,1.);+#4209 = DIRECTION('',(0.,-1.));+#4210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4211 = PCURVE('',#3562,#4212);+#4212 = DEFINITIONAL_REPRESENTATION('',(#4213),#4217);+#4213 = LINE('',#4214,#4215);+#4214 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#4215 = VECTOR('',#4216,1.);+#4216 = DIRECTION('',(0.,-1.));+#4217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4218 = ADVANCED_FACE('',(#4219),#3562,.F.);+#4219 = FACE_BOUND('',#4220,.F.);+#4220 = EDGE_LOOP('',(#4221,#4222,#4223,#4244));+#4221 = ORIENTED_EDGE('',*,*,#4198,.T.);+#4222 = ORIENTED_EDGE('',*,*,#3913,.T.);+#4223 = ORIENTED_EDGE('',*,*,#4224,.T.);+#4224 = EDGE_CURVE('',#3891,#3519,#4225,.T.);+#4225 = SURFACE_CURVE('',#4226,(#4230,#4237),.PCURVE_S1.);+#4226 = LINE('',#4227,#4228);+#4227 = CARTESIAN_POINT('',(-2.045,-4.43,0.));+#4228 = VECTOR('',#4229,1.);+#4229 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4230 = PCURVE('',#3562,#4231);+#4231 = DEFINITIONAL_REPRESENTATION('',(#4232),#4236);+#4232 = LINE('',#4233,#4234);+#4233 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#4234 = VECTOR('',#4235,1.);+#4235 = DIRECTION('',(0.,1.));+#4236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4237 = PCURVE('',#3534,#4238);+#4238 = DEFINITIONAL_REPRESENTATION('',(#4239),#4243);+#4239 = LINE('',#4240,#4241);+#4240 = CARTESIAN_POINT('',(0.5,-0.295));+#4241 = VECTOR('',#4242,1.);+#4242 = DIRECTION('',(0.,-1.));+#4243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4244 = ORIENTED_EDGE('',*,*,#3546,.F.);+#4245 = ADVANCED_FACE('',(#4246),#3534,.T.);+#4246 = FACE_BOUND('',#4247,.T.);+#4247 = EDGE_LOOP('',(#4248,#4249,#4270,#4271));+#4248 = ORIENTED_EDGE('',*,*,#3518,.F.);+#4249 = ORIENTED_EDGE('',*,*,#4250,.F.);+#4250 = EDGE_CURVE('',#3868,#3491,#4251,.T.);+#4251 = SURFACE_CURVE('',#4252,(#4256,#4263),.PCURVE_S1.);+#4252 = LINE('',#4253,#4254);+#4253 = CARTESIAN_POINT('',(-2.045,-4.43,0.105));+#4254 = VECTOR('',#4255,1.);+#4255 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4256 = PCURVE('',#3534,#4257);+#4257 = DEFINITIONAL_REPRESENTATION('',(#4258),#4262);+#4258 = LINE('',#4259,#4260);+#4259 = CARTESIAN_POINT('',(0.605,-0.295));+#4260 = VECTOR('',#4261,1.);+#4261 = DIRECTION('',(0.,-1.));+#4262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4263 = PCURVE('',#3506,#4264);+#4264 = DEFINITIONAL_REPRESENTATION('',(#4265),#4269);+#4265 = LINE('',#4266,#4267);+#4266 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#4267 = VECTOR('',#4268,1.);+#4268 = DIRECTION('',(0.,1.));+#4269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4270 = ORIENTED_EDGE('',*,*,#3890,.T.);+#4271 = ORIENTED_EDGE('',*,*,#4224,.T.);+#4272 = ADVANCED_FACE('',(#4273),#3506,.T.);+#4273 = FACE_BOUND('',#4274,.T.);+#4274 = EDGE_LOOP('',(#4275,#4296,#4297,#4298));+#4275 = ORIENTED_EDGE('',*,*,#4276,.T.);+#4276 = EDGE_CURVE('',#3462,#3844,#4277,.T.);+#4277 = SURFACE_CURVE('',#4278,(#4282,#4289),.PCURVE_S1.);+#4278 = LINE('',#4279,#4280);+#4279 = CARTESIAN_POINT('',(-1.66,-3.99529407561,0.105));+#4280 = VECTOR('',#4281,1.);+#4281 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4282 = PCURVE('',#3506,#4283);+#4283 = DEFINITIONAL_REPRESENTATION('',(#4284),#4288);+#4284 = LINE('',#4285,#4286);+#4285 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#4286 = VECTOR('',#4287,1.);+#4287 = DIRECTION('',(0.,-1.));+#4288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4289 = PCURVE('',#3478,#4290);+#4290 = DEFINITIONAL_REPRESENTATION('',(#4291),#4295);+#4291 = LINE('',#4292,#4293);+#4292 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#4293 = VECTOR('',#4294,1.);+#4294 = DIRECTION('',(0.,-1.));+#4295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4296 = ORIENTED_EDGE('',*,*,#3867,.T.);+#4297 = ORIENTED_EDGE('',*,*,#4250,.T.);+#4298 = ORIENTED_EDGE('',*,*,#3490,.F.);+#4299 = ADVANCED_FACE('',(#4300),#3478,.F.);+#4300 = FACE_BOUND('',#4301,.F.);+#4301 = EDGE_LOOP('',(#4302,#4303,#4324,#4325));+#4302 = ORIENTED_EDGE('',*,*,#3843,.T.);+#4303 = ORIENTED_EDGE('',*,*,#4304,.F.);+#4304 = EDGE_CURVE('',#3434,#3821,#4305,.T.);+#4305 = SURFACE_CURVE('',#4306,(#4310,#4317),.PCURVE_S1.);+#4306 = LINE('',#4307,#4308);+#4307 = CARTESIAN_POINT('',(-1.66,-3.958168154079,0.127361620474));+#4308 = VECTOR('',#4309,1.);+#4309 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4310 = PCURVE('',#3478,#4311);+#4311 = DEFINITIONAL_REPRESENTATION('',(#4312),#4316);+#4312 = LINE('',#4313,#4314);+#4313 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#4314 = VECTOR('',#4315,1.);+#4315 = DIRECTION('',(0.,-1.));+#4316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4317 = PCURVE('',#3449,#4318);+#4318 = DEFINITIONAL_REPRESENTATION('',(#4319),#4323);+#4319 = LINE('',#4320,#4321);+#4320 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#4321 = VECTOR('',#4322,1.);+#4322 = DIRECTION('',(-4.767113258106E-29,-1.));+#4323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4324 = ORIENTED_EDGE('',*,*,#3461,.F.);+#4325 = ORIENTED_EDGE('',*,*,#4276,.T.);+#4326 = ADVANCED_FACE('',(#4327),#3449,.T.);+#4327 = FACE_BOUND('',#4328,.T.);+#4328 = EDGE_LOOP('',(#4329,#4330,#4331,#4332));+#4329 = ORIENTED_EDGE('',*,*,#4062,.F.);+#4330 = ORIENTED_EDGE('',*,*,#3820,.T.);+#4331 = ORIENTED_EDGE('',*,*,#4304,.F.);+#4332 = ORIENTED_EDGE('',*,*,#3433,.F.);+#4333 = MANIFOLD_SOLID_BREP('',#4334);+#4334 = CLOSED_SHELL('',(#4335,#4465,#4541,#4879,#4928,#5194,#5221,#5248+ ,#5275,#5302,#5329,#5356,#5383,#5410,#5437,#5464));+#4335 = ADVANCED_FACE('',(#4336),#4351,.T.);+#4336 = FACE_BOUND('',#4337,.T.);+#4337 = EDGE_LOOP('',(#4338,#4378,#4406,#4439));+#4338 = ORIENTED_EDGE('',*,*,#4339,.T.);+#4339 = EDGE_CURVE('',#4340,#4342,#4344,.T.);+#4340 = VERTEX_POINT('',#4341);+#4341 = CARTESIAN_POINT('',(-1.16,-3.25,0.7825));+#4342 = VERTEX_POINT('',#4343);+#4343 = CARTESIAN_POINT('',(-1.16,-3.2,0.746007810594));+#4344 = SURFACE_CURVE('',#4345,(#4350,#4362),.PCURVE_S1.);+#4345 = CIRCLE('',#4346,5.25E-02);+#4346 = AXIS2_PLACEMENT_3D('',#4347,#4348,#4349);+#4347 = CARTESIAN_POINT('',(-1.16,-3.25,0.73));+#4348 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4349 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4350 = PCURVE('',#4351,#4356);+#4351 = CYLINDRICAL_SURFACE('',#4352,5.25E-02);+#4352 = AXIS2_PLACEMENT_3D('',#4353,#4354,#4355);+#4353 = CARTESIAN_POINT('',(-1.25,-3.25,0.73));+#4354 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4355 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4356 = DEFINITIONAL_REPRESENTATION('',(#4357),#4361);+#4357 = LINE('',#4358,#4359);+#4358 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#4359 = VECTOR('',#4360,1.);+#4360 = DIRECTION('',(-1.,-0.));+#4361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4362 = PCURVE('',#4363,#4368);+#4363 = PLANE('',#4364);+#4364 = AXIS2_PLACEMENT_3D('',#4365,#4366,#4367);+#4365 = CARTESIAN_POINT('',(-1.16,-3.861815252728,0.337140815196));+#4366 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4367 = DIRECTION('',(0.,0.,1.));+#4368 = DEFINITIONAL_REPRESENTATION('',(#4369),#4377);+#4369 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4370,#4371,#4372,#4373,+#4374,#4375,#4376),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4370 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#4371 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#4372 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#4373 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#4374 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#4375 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#4376 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#4377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4378 = ORIENTED_EDGE('',*,*,#4379,.F.);+#4379 = EDGE_CURVE('',#4380,#4342,#4382,.T.);+#4380 = VERTEX_POINT('',#4381);+#4381 = CARTESIAN_POINT('',(-1.34,-3.2,0.746007810594));+#4382 = SURFACE_CURVE('',#4383,(#4387,#4394),.PCURVE_S1.);+#4383 = LINE('',#4384,#4385);+#4384 = CARTESIAN_POINT('',(-1.25,-3.2,0.746007810594));+#4385 = VECTOR('',#4386,1.);+#4386 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4387 = PCURVE('',#4351,#4388);+#4388 = DEFINITIONAL_REPRESENTATION('',(#4389),#4393);+#4389 = LINE('',#4390,#4391);+#4390 = CARTESIAN_POINT('',(3.451437293332,0.));+#4391 = VECTOR('',#4392,1.);+#4392 = DIRECTION('',(-0.,1.));+#4393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4394 = PCURVE('',#4395,#4400);+#4395 = PLANE('',#4396);+#4396 = AXIS2_PLACEMENT_3D('',#4397,#4398,#4399);+#4397 = CARTESIAN_POINT('',(-1.84,-3.2,-0.5));+#4398 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4399 = DIRECTION('',(0.,0.,1.));+#4400 = DEFINITIONAL_REPRESENTATION('',(#4401),#4405);+#4401 = LINE('',#4402,#4403);+#4402 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#4403 = VECTOR('',#4404,1.);+#4404 = DIRECTION('',(0.,-1.));+#4405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4406 = ORIENTED_EDGE('',*,*,#4407,.F.);+#4407 = EDGE_CURVE('',#4408,#4380,#4410,.T.);+#4408 = VERTEX_POINT('',#4409);+#4409 = CARTESIAN_POINT('',(-1.34,-3.25,0.7825));+#4410 = SURFACE_CURVE('',#4411,(#4416,#4423),.PCURVE_S1.);+#4411 = CIRCLE('',#4412,5.25E-02);+#4412 = AXIS2_PLACEMENT_3D('',#4413,#4414,#4415);+#4413 = CARTESIAN_POINT('',(-1.34,-3.25,0.73));+#4414 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4415 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4416 = PCURVE('',#4351,#4417);+#4417 = DEFINITIONAL_REPRESENTATION('',(#4418),#4422);+#4418 = LINE('',#4419,#4420);+#4419 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#4420 = VECTOR('',#4421,1.);+#4421 = DIRECTION('',(-1.,0.));+#4422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4423 = PCURVE('',#4424,#4429);+#4424 = PLANE('',#4425);+#4425 = AXIS2_PLACEMENT_3D('',#4426,#4427,#4428);+#4426 = CARTESIAN_POINT('',(-1.34,-3.861815252728,0.337140815196));+#4427 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4428 = DIRECTION('',(0.,0.,1.));+#4429 = DEFINITIONAL_REPRESENTATION('',(#4430),#4438);+#4430 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4431,#4432,#4433,#4434,+#4435,#4436,#4437),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4431 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#4432 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#4433 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#4434 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#4435 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#4436 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#4437 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#4438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4439 = ORIENTED_EDGE('',*,*,#4440,.T.);+#4440 = EDGE_CURVE('',#4408,#4340,#4441,.T.);+#4441 = SURFACE_CURVE('',#4442,(#4446,#4453),.PCURVE_S1.);+#4442 = LINE('',#4443,#4444);+#4443 = CARTESIAN_POINT('',(-1.34,-3.25,0.7825));+#4444 = VECTOR('',#4445,1.);+#4445 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4446 = PCURVE('',#4351,#4447);+#4447 = DEFINITIONAL_REPRESENTATION('',(#4448),#4452);+#4448 = LINE('',#4449,#4450);+#4449 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#4450 = VECTOR('',#4451,1.);+#4451 = DIRECTION('',(0.,1.));+#4452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4453 = PCURVE('',#4454,#4459);+#4454 = PLANE('',#4455);+#4455 = AXIS2_PLACEMENT_3D('',#4456,#4457,#4458);+#4456 = CARTESIAN_POINT('',(-1.25,-3.25,0.7825));+#4457 = DIRECTION('',(0.,0.,1.));+#4458 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4459 = DEFINITIONAL_REPRESENTATION('',(#4460),#4464);+#4460 = LINE('',#4461,#4462);+#4461 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#4462 = VECTOR('',#4463,1.);+#4463 = DIRECTION('',(0.,1.));+#4464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4465 = ADVANCED_FACE('',(#4466),#4454,.T.);+#4466 = FACE_BOUND('',#4467,.T.);+#4467 = EDGE_LOOP('',(#4468,#4469,#4492,#4520));+#4468 = ORIENTED_EDGE('',*,*,#4440,.F.);+#4469 = ORIENTED_EDGE('',*,*,#4470,.T.);+#4470 = EDGE_CURVE('',#4408,#4471,#4473,.T.);+#4471 = VERTEX_POINT('',#4472);+#4472 = CARTESIAN_POINT('',(-1.34,-3.52308092439,0.7825));+#4473 = SURFACE_CURVE('',#4474,(#4478,#4485),.PCURVE_S1.);+#4474 = LINE('',#4475,#4476);+#4475 = CARTESIAN_POINT('',(-1.34,-3.25,0.7825));+#4476 = VECTOR('',#4477,1.);+#4477 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4478 = PCURVE('',#4454,#4479);+#4479 = DEFINITIONAL_REPRESENTATION('',(#4480),#4484);+#4480 = LINE('',#4481,#4482);+#4481 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#4482 = VECTOR('',#4483,1.);+#4483 = DIRECTION('',(1.,0.));+#4484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4485 = PCURVE('',#4424,#4486);+#4486 = DEFINITIONAL_REPRESENTATION('',(#4487),#4491);+#4487 = LINE('',#4488,#4489);+#4488 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#4489 = VECTOR('',#4490,1.);+#4490 = DIRECTION('',(0.,1.));+#4491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4492 = ORIENTED_EDGE('',*,*,#4493,.T.);+#4493 = EDGE_CURVE('',#4471,#4494,#4496,.T.);+#4494 = VERTEX_POINT('',#4495);+#4495 = CARTESIAN_POINT('',(-1.16,-3.52308092439,0.7825));+#4496 = SURFACE_CURVE('',#4497,(#4501,#4508),.PCURVE_S1.);+#4497 = LINE('',#4498,#4499);+#4498 = CARTESIAN_POINT('',(-1.34,-3.52308092439,0.7825));+#4499 = VECTOR('',#4500,1.);+#4500 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4501 = PCURVE('',#4454,#4502);+#4502 = DEFINITIONAL_REPRESENTATION('',(#4503),#4507);+#4503 = LINE('',#4504,#4505);+#4504 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#4505 = VECTOR('',#4506,1.);+#4506 = DIRECTION('',(0.,1.));+#4507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4508 = PCURVE('',#4509,#4514);+#4509 = CYLINDRICAL_SURFACE('',#4510,0.147);+#4510 = AXIS2_PLACEMENT_3D('',#4511,#4512,#4513);+#4511 = CARTESIAN_POINT('',(-1.25,-3.52308092439,0.6355));+#4512 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4513 = DIRECTION('',(0.,0.,1.));+#4514 = DEFINITIONAL_REPRESENTATION('',(#4515),#4519);+#4515 = LINE('',#4516,#4517);+#4516 = CARTESIAN_POINT('',(0.,-9.E-02));+#4517 = VECTOR('',#4518,1.);+#4518 = DIRECTION('',(-0.,1.));+#4519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4520 = ORIENTED_EDGE('',*,*,#4521,.F.);+#4521 = EDGE_CURVE('',#4340,#4494,#4522,.T.);+#4522 = SURFACE_CURVE('',#4523,(#4527,#4534),.PCURVE_S1.);+#4523 = LINE('',#4524,#4525);+#4524 = CARTESIAN_POINT('',(-1.16,-3.25,0.7825));+#4525 = VECTOR('',#4526,1.);+#4526 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4527 = PCURVE('',#4454,#4528);+#4528 = DEFINITIONAL_REPRESENTATION('',(#4529),#4533);+#4529 = LINE('',#4530,#4531);+#4530 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#4531 = VECTOR('',#4532,1.);+#4532 = DIRECTION('',(1.,0.));+#4533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4534 = PCURVE('',#4363,#4535);+#4535 = DEFINITIONAL_REPRESENTATION('',(#4536),#4540);+#4536 = LINE('',#4537,#4538);+#4537 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#4538 = VECTOR('',#4539,1.);+#4539 = DIRECTION('',(0.,1.));+#4540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4541 = ADVANCED_FACE('',(#4542),#4363,.T.);+#4542 = FACE_BOUND('',#4543,.T.);+#4543 = EDGE_LOOP('',(#4544,#4545,#4546,#4570,#4598,#4627,#4655,#4683,+ #4711,#4740,#4768,#4797,#4825,#4858));+#4544 = ORIENTED_EDGE('',*,*,#4339,.F.);+#4545 = ORIENTED_EDGE('',*,*,#4521,.T.);+#4546 = ORIENTED_EDGE('',*,*,#4547,.T.);+#4547 = EDGE_CURVE('',#4494,#4548,#4550,.T.);+#4548 = VERTEX_POINT('',#4549);+#4549 = CARTESIAN_POINT('',(-1.16,-3.653021649751,0.704234328342));+#4550 = SURFACE_CURVE('',#4551,(#4556,#4563),.PCURVE_S1.);+#4551 = CIRCLE('',#4552,0.147);+#4552 = AXIS2_PLACEMENT_3D('',#4553,#4554,#4555);+#4553 = CARTESIAN_POINT('',(-1.16,-3.52308092439,0.6355));+#4554 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#4555 = DIRECTION('',(0.,0.,1.));+#4556 = PCURVE('',#4363,#4557);+#4557 = DEFINITIONAL_REPRESENTATION('',(#4558),#4562);+#4558 = CIRCLE('',#4559,0.147);+#4559 = AXIS2_PLACEMENT_2D('',#4560,#4561);+#4560 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#4561 = DIRECTION('',(1.,0.));+#4562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4563 = PCURVE('',#4509,#4564);+#4564 = DEFINITIONAL_REPRESENTATION('',(#4565),#4569);+#4565 = LINE('',#4566,#4567);+#4566 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#4567 = VECTOR('',#4568,1.);+#4568 = DIRECTION('',(1.,-0.));+#4569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4570 = ORIENTED_EDGE('',*,*,#4571,.T.);+#4571 = EDGE_CURVE('',#4548,#4572,#4574,.T.);+#4572 = VERTEX_POINT('',#4573);+#4573 = CARTESIAN_POINT('',(-1.16,-3.958168154079,0.127361620474));+#4574 = SURFACE_CURVE('',#4575,(#4579,#4586),.PCURVE_S1.);+#4575 = LINE('',#4576,#4577);+#4576 = CARTESIAN_POINT('',(-1.16,-3.626407401915,0.754547974408));+#4577 = VECTOR('',#4578,1.);+#4578 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#4579 = PCURVE('',#4363,#4580);+#4580 = DEFINITIONAL_REPRESENTATION('',(#4581),#4585);+#4581 = LINE('',#4582,#4583);+#4582 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#4583 = VECTOR('',#4584,1.);+#4584 = DIRECTION('',(-0.883950512662,0.467580464908));+#4585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4586 = PCURVE('',#4587,#4592);+#4587 = PLANE('',#4588);+#4588 = AXIS2_PLACEMENT_3D('',#4589,#4590,#4591);+#4589 = CARTESIAN_POINT('',(-1.25,-3.653021649751,0.704234328342));+#4590 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#4591 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#4592 = DEFINITIONAL_REPRESENTATION('',(#4593),#4597);+#4593 = LINE('',#4594,#4595);+#4594 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#4595 = VECTOR('',#4596,1.);+#4596 = DIRECTION('',(1.,-2.399596746007E-32));+#4597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4598 = ORIENTED_EDGE('',*,*,#4599,.F.);+#4599 = EDGE_CURVE('',#4600,#4572,#4602,.T.);+#4600 = VERTEX_POINT('',#4601);+#4601 = CARTESIAN_POINT('',(-1.16,-3.99529407561,0.105));+#4602 = SURFACE_CURVE('',#4603,(#4608,#4615),.PCURVE_S1.);+#4603 = CIRCLE('',#4604,4.2E-02);+#4604 = AXIS2_PLACEMENT_3D('',#4605,#4606,#4607);+#4605 = CARTESIAN_POINT('',(-1.16,-3.99529407561,0.147));+#4606 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#4607 = DIRECTION('',(0.,0.,1.));+#4608 = PCURVE('',#4363,#4609);+#4609 = DEFINITIONAL_REPRESENTATION('',(#4610),#4614);+#4610 = CIRCLE('',#4611,4.2E-02);+#4611 = AXIS2_PLACEMENT_2D('',#4612,#4613);+#4612 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#4613 = DIRECTION('',(1.,0.));+#4614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4615 = PCURVE('',#4616,#4621);+#4616 = CYLINDRICAL_SURFACE('',#4617,4.2E-02);+#4617 = AXIS2_PLACEMENT_3D('',#4618,#4619,#4620);+#4618 = CARTESIAN_POINT('',(-1.25,-3.99529407561,0.147));+#4619 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4620 = DIRECTION('',(0.,0.,1.));+#4621 = DEFINITIONAL_REPRESENTATION('',(#4622),#4626);+#4622 = LINE('',#4623,#4624);+#4623 = CARTESIAN_POINT('',(-0.,9.E-02));+#4624 = VECTOR('',#4625,1.);+#4625 = DIRECTION('',(1.,-0.));+#4626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4627 = ORIENTED_EDGE('',*,*,#4628,.T.);+#4628 = EDGE_CURVE('',#4600,#4629,#4631,.T.);+#4629 = VERTEX_POINT('',#4630);+#4630 = CARTESIAN_POINT('',(-1.16,-4.43,0.105));+#4631 = SURFACE_CURVE('',#4632,(#4636,#4643),.PCURVE_S1.);+#4632 = LINE('',#4633,#4634);+#4633 = CARTESIAN_POINT('',(-1.16,-3.938375,0.105));+#4634 = VECTOR('',#4635,1.);+#4635 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4636 = PCURVE('',#4363,#4637);+#4637 = DEFINITIONAL_REPRESENTATION('',(#4638),#4642);+#4638 = LINE('',#4639,#4640);+#4639 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#4640 = VECTOR('',#4641,1.);+#4641 = DIRECTION('',(0.,1.));+#4642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4643 = PCURVE('',#4644,#4649);+#4644 = PLANE('',#4645);+#4645 = AXIS2_PLACEMENT_3D('',#4646,#4647,#4648);+#4646 = CARTESIAN_POINT('',(-1.25,-3.99529407561,0.105));+#4647 = DIRECTION('',(0.,0.,1.));+#4648 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4649 = DEFINITIONAL_REPRESENTATION('',(#4650),#4654);+#4650 = LINE('',#4651,#4652);+#4651 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#4652 = VECTOR('',#4653,1.);+#4653 = DIRECTION('',(1.,0.));+#4654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4655 = ORIENTED_EDGE('',*,*,#4656,.T.);+#4656 = EDGE_CURVE('',#4629,#4657,#4659,.T.);+#4657 = VERTEX_POINT('',#4658);+#4658 = CARTESIAN_POINT('',(-1.16,-4.43,0.));+#4659 = SURFACE_CURVE('',#4660,(#4664,#4671),.PCURVE_S1.);+#4660 = LINE('',#4661,#4662);+#4661 = CARTESIAN_POINT('',(-1.16,-4.43,-8.142959240193E-02));+#4662 = VECTOR('',#4663,1.);+#4663 = DIRECTION('',(0.,0.,-1.));+#4664 = PCURVE('',#4363,#4665);+#4665 = DEFINITIONAL_REPRESENTATION('',(#4666),#4670);+#4666 = LINE('',#4667,#4668);+#4667 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#4668 = VECTOR('',#4669,1.);+#4669 = DIRECTION('',(-1.,0.));+#4670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4671 = PCURVE('',#4672,#4677);+#4672 = PLANE('',#4673);+#4673 = AXIS2_PLACEMENT_3D('',#4674,#4675,#4676);+#4674 = CARTESIAN_POINT('',(-1.84,-4.43,-0.5));+#4675 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4676 = DIRECTION('',(0.,0.,1.));+#4677 = DEFINITIONAL_REPRESENTATION('',(#4678),#4682);+#4678 = LINE('',#4679,#4680);+#4679 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#4680 = VECTOR('',#4681,1.);+#4681 = DIRECTION('',(-1.,-0.));+#4682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4683 = ORIENTED_EDGE('',*,*,#4684,.F.);+#4684 = EDGE_CURVE('',#4685,#4657,#4687,.T.);+#4685 = VERTEX_POINT('',#4686);+#4686 = CARTESIAN_POINT('',(-1.16,-3.99529407561,0.));+#4687 = SURFACE_CURVE('',#4688,(#4692,#4699),.PCURVE_S1.);+#4688 = LINE('',#4689,#4690);+#4689 = CARTESIAN_POINT('',(-1.16,-3.938375,0.));+#4690 = VECTOR('',#4691,1.);+#4691 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4692 = PCURVE('',#4363,#4693);+#4693 = DEFINITIONAL_REPRESENTATION('',(#4694),#4698);+#4694 = LINE('',#4695,#4696);+#4695 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#4696 = VECTOR('',#4697,1.);+#4697 = DIRECTION('',(0.,1.));+#4698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4699 = PCURVE('',#4700,#4705);+#4700 = PLANE('',#4701);+#4701 = AXIS2_PLACEMENT_3D('',#4702,#4703,#4704);+#4702 = CARTESIAN_POINT('',(-1.25,-3.99529407561,0.));+#4703 = DIRECTION('',(0.,0.,1.));+#4704 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4705 = DEFINITIONAL_REPRESENTATION('',(#4706),#4710);+#4706 = LINE('',#4707,#4708);+#4707 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#4708 = VECTOR('',#4709,1.);+#4709 = DIRECTION('',(1.,0.));+#4710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4711 = ORIENTED_EDGE('',*,*,#4712,.T.);+#4712 = EDGE_CURVE('',#4685,#4713,#4715,.T.);+#4713 = VERTEX_POINT('',#4714);+#4714 = CARTESIAN_POINT('',(-1.16,-3.865353350249,7.826567165848E-02));+#4715 = SURFACE_CURVE('',#4716,(#4721,#4728),.PCURVE_S1.);+#4716 = CIRCLE('',#4717,0.147);+#4717 = AXIS2_PLACEMENT_3D('',#4718,#4719,#4720);+#4718 = CARTESIAN_POINT('',(-1.16,-3.99529407561,0.147));+#4719 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#4720 = DIRECTION('',(0.,0.,1.));+#4721 = PCURVE('',#4363,#4722);+#4722 = DEFINITIONAL_REPRESENTATION('',(#4723),#4727);+#4723 = CIRCLE('',#4724,0.147);+#4724 = AXIS2_PLACEMENT_2D('',#4725,#4726);+#4725 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#4726 = DIRECTION('',(1.,0.));+#4727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4728 = PCURVE('',#4729,#4734);+#4729 = CYLINDRICAL_SURFACE('',#4730,0.147);+#4730 = AXIS2_PLACEMENT_3D('',#4731,#4732,#4733);+#4731 = CARTESIAN_POINT('',(-1.25,-3.99529407561,0.147));+#4732 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4733 = DIRECTION('',(0.,0.,1.));+#4734 = DEFINITIONAL_REPRESENTATION('',(#4735),#4739);+#4735 = LINE('',#4736,#4737);+#4736 = CARTESIAN_POINT('',(-0.,9.E-02));+#4737 = VECTOR('',#4738,1.);+#4738 = DIRECTION('',(1.,-0.));+#4739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4740 = ORIENTED_EDGE('',*,*,#4741,.F.);+#4741 = EDGE_CURVE('',#4742,#4713,#4744,.T.);+#4742 = VERTEX_POINT('',#4743);+#4743 = CARTESIAN_POINT('',(-1.16,-3.560206845921,0.655138379526));+#4744 = SURFACE_CURVE('',#4745,(#4749,#4756),.PCURVE_S1.);+#4745 = LINE('',#4746,#4747);+#4746 = CARTESIAN_POINT('',(-1.16,-3.533592598085,0.705452025592));+#4747 = VECTOR('',#4748,1.);+#4748 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#4749 = PCURVE('',#4363,#4750);+#4750 = DEFINITIONAL_REPRESENTATION('',(#4751),#4755);+#4751 = LINE('',#4752,#4753);+#4752 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#4753 = VECTOR('',#4754,1.);+#4754 = DIRECTION('',(-0.883950512662,0.467580464908));+#4755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4756 = PCURVE('',#4757,#4762);+#4757 = PLANE('',#4758);+#4758 = AXIS2_PLACEMENT_3D('',#4759,#4760,#4761);+#4759 = CARTESIAN_POINT('',(-1.25,-3.560206845921,0.655138379526));+#4760 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#4761 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#4762 = DEFINITIONAL_REPRESENTATION('',(#4763),#4767);+#4763 = LINE('',#4764,#4765);+#4764 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#4765 = VECTOR('',#4766,1.);+#4766 = DIRECTION('',(1.,-2.399596746007E-32));+#4767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4768 = ORIENTED_EDGE('',*,*,#4769,.F.);+#4769 = EDGE_CURVE('',#4770,#4742,#4772,.T.);+#4770 = VERTEX_POINT('',#4771);+#4771 = CARTESIAN_POINT('',(-1.16,-3.52308092439,0.6775));+#4772 = SURFACE_CURVE('',#4773,(#4778,#4785),.PCURVE_S1.);+#4773 = CIRCLE('',#4774,4.2E-02);+#4774 = AXIS2_PLACEMENT_3D('',#4775,#4776,#4777);+#4775 = CARTESIAN_POINT('',(-1.16,-3.52308092439,0.6355));+#4776 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#4777 = DIRECTION('',(0.,0.,1.));+#4778 = PCURVE('',#4363,#4779);+#4779 = DEFINITIONAL_REPRESENTATION('',(#4780),#4784);+#4780 = CIRCLE('',#4781,4.2E-02);+#4781 = AXIS2_PLACEMENT_2D('',#4782,#4783);+#4782 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#4783 = DIRECTION('',(1.,0.));+#4784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4785 = PCURVE('',#4786,#4791);+#4786 = CYLINDRICAL_SURFACE('',#4787,4.2E-02);+#4787 = AXIS2_PLACEMENT_3D('',#4788,#4789,#4790);+#4788 = CARTESIAN_POINT('',(-1.25,-3.52308092439,0.6355));+#4789 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4790 = DIRECTION('',(0.,0.,1.));+#4791 = DEFINITIONAL_REPRESENTATION('',(#4792),#4796);+#4792 = LINE('',#4793,#4794);+#4793 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#4794 = VECTOR('',#4795,1.);+#4795 = DIRECTION('',(1.,-0.));+#4796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4797 = ORIENTED_EDGE('',*,*,#4798,.F.);+#4798 = EDGE_CURVE('',#4799,#4770,#4801,.T.);+#4799 = VERTEX_POINT('',#4800);+#4800 = CARTESIAN_POINT('',(-1.16,-3.25,0.6775));+#4801 = SURFACE_CURVE('',#4802,(#4806,#4813),.PCURVE_S1.);+#4802 = LINE('',#4803,#4804);+#4803 = CARTESIAN_POINT('',(-1.16,-3.25,0.6775));+#4804 = VECTOR('',#4805,1.);+#4805 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4806 = PCURVE('',#4363,#4807);+#4807 = DEFINITIONAL_REPRESENTATION('',(#4808),#4812);+#4808 = LINE('',#4809,#4810);+#4809 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#4810 = VECTOR('',#4811,1.);+#4811 = DIRECTION('',(0.,1.));+#4812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4813 = PCURVE('',#4814,#4819);+#4814 = PLANE('',#4815);+#4815 = AXIS2_PLACEMENT_3D('',#4816,#4817,#4818);+#4816 = CARTESIAN_POINT('',(-1.25,-3.25,0.6775));+#4817 = DIRECTION('',(0.,0.,1.));+#4818 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4819 = DEFINITIONAL_REPRESENTATION('',(#4820),#4824);+#4820 = LINE('',#4821,#4822);+#4821 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#4822 = VECTOR('',#4823,1.);+#4823 = DIRECTION('',(1.,0.));+#4824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4825 = ORIENTED_EDGE('',*,*,#4826,.F.);+#4826 = EDGE_CURVE('',#4827,#4799,#4829,.T.);+#4827 = VERTEX_POINT('',#4828);+#4828 = CARTESIAN_POINT('',(-1.16,-3.2,0.713992189406));+#4829 = SURFACE_CURVE('',#4830,(#4835,#4846),.PCURVE_S1.);+#4830 = CIRCLE('',#4831,5.25E-02);+#4831 = AXIS2_PLACEMENT_3D('',#4832,#4833,#4834);+#4832 = CARTESIAN_POINT('',(-1.16,-3.25,0.73));+#4833 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#4834 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4835 = PCURVE('',#4363,#4836);+#4836 = DEFINITIONAL_REPRESENTATION('',(#4837),#4845);+#4837 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#4838,#4839,#4840,#4841,+#4842,#4843,#4844),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#4838 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#4839 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#4840 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#4841 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#4842 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#4843 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#4844 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#4845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4846 = PCURVE('',#4847,#4852);+#4847 = CYLINDRICAL_SURFACE('',#4848,5.25E-02);+#4848 = AXIS2_PLACEMENT_3D('',#4849,#4850,#4851);+#4849 = CARTESIAN_POINT('',(-1.25,-3.25,0.73));+#4850 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4851 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#4852 = DEFINITIONAL_REPRESENTATION('',(#4853),#4857);+#4853 = LINE('',#4854,#4855);+#4854 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#4855 = VECTOR('',#4856,1.);+#4856 = DIRECTION('',(-1.,-0.));+#4857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4858 = ORIENTED_EDGE('',*,*,#4859,.F.);+#4859 = EDGE_CURVE('',#4342,#4827,#4860,.T.);+#4860 = SURFACE_CURVE('',#4861,(#4865,#4872),.PCURVE_S1.);+#4861 = LINE('',#4862,#4863);+#4862 = CARTESIAN_POINT('',(-1.16,-3.2,-8.142959240193E-02));+#4863 = VECTOR('',#4864,1.);+#4864 = DIRECTION('',(0.,0.,-1.));+#4865 = PCURVE('',#4363,#4866);+#4866 = DEFINITIONAL_REPRESENTATION('',(#4867),#4871);+#4867 = LINE('',#4868,#4869);+#4868 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#4869 = VECTOR('',#4870,1.);+#4870 = DIRECTION('',(-1.,0.));+#4871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4872 = PCURVE('',#4395,#4873);+#4873 = DEFINITIONAL_REPRESENTATION('',(#4874),#4878);+#4874 = LINE('',#4875,#4876);+#4875 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#4876 = VECTOR('',#4877,1.);+#4877 = DIRECTION('',(-1.,-0.));+#4878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4879 = ADVANCED_FACE('',(#4880),#4395,.F.);+#4880 = FACE_BOUND('',#4881,.F.);+#4881 = EDGE_LOOP('',(#4882,#4883,#4906,#4927));+#4882 = ORIENTED_EDGE('',*,*,#4379,.F.);+#4883 = ORIENTED_EDGE('',*,*,#4884,.T.);+#4884 = EDGE_CURVE('',#4380,#4885,#4887,.T.);+#4885 = VERTEX_POINT('',#4886);+#4886 = CARTESIAN_POINT('',(-1.34,-3.2,0.713992189406));+#4887 = SURFACE_CURVE('',#4888,(#4892,#4899),.PCURVE_S1.);+#4888 = LINE('',#4889,#4890);+#4889 = CARTESIAN_POINT('',(-1.34,-3.2,-8.142959240193E-02));+#4890 = VECTOR('',#4891,1.);+#4891 = DIRECTION('',(0.,0.,-1.));+#4892 = PCURVE('',#4395,#4893);+#4893 = DEFINITIONAL_REPRESENTATION('',(#4894),#4898);+#4894 = LINE('',#4895,#4896);+#4895 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#4896 = VECTOR('',#4897,1.);+#4897 = DIRECTION('',(-1.,-0.));+#4898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4899 = PCURVE('',#4424,#4900);+#4900 = DEFINITIONAL_REPRESENTATION('',(#4901),#4905);+#4901 = LINE('',#4902,#4903);+#4902 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#4903 = VECTOR('',#4904,1.);+#4904 = DIRECTION('',(-1.,0.));+#4905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4906 = ORIENTED_EDGE('',*,*,#4907,.T.);+#4907 = EDGE_CURVE('',#4885,#4827,#4908,.T.);+#4908 = SURFACE_CURVE('',#4909,(#4913,#4920),.PCURVE_S1.);+#4909 = LINE('',#4910,#4911);+#4910 = CARTESIAN_POINT('',(-1.25,-3.2,0.713992189406));+#4911 = VECTOR('',#4912,1.);+#4912 = DIRECTION('',(1.,1.110223024625E-16,0.));+#4913 = PCURVE('',#4395,#4914);+#4914 = DEFINITIONAL_REPRESENTATION('',(#4915),#4919);+#4915 = LINE('',#4916,#4917);+#4916 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#4917 = VECTOR('',#4918,1.);+#4918 = DIRECTION('',(0.,-1.));+#4919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4920 = PCURVE('',#4847,#4921);+#4921 = DEFINITIONAL_REPRESENTATION('',(#4922),#4926);+#4922 = LINE('',#4923,#4924);+#4923 = CARTESIAN_POINT('',(2.831748013849,0.));+#4924 = VECTOR('',#4925,1.);+#4925 = DIRECTION('',(-0.,1.));+#4926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4927 = ORIENTED_EDGE('',*,*,#4859,.F.);+#4928 = ADVANCED_FACE('',(#4929),#4424,.F.);+#4929 = FACE_BOUND('',#4930,.F.);+#4930 = EDGE_LOOP('',(#4931,#4932,#4933,#4957,#4980,#5004,#5027,#5050,+ #5073,#5097,#5120,#5144,#5167,#5193));+#4931 = ORIENTED_EDGE('',*,*,#4407,.F.);+#4932 = ORIENTED_EDGE('',*,*,#4470,.T.);+#4933 = ORIENTED_EDGE('',*,*,#4934,.T.);+#4934 = EDGE_CURVE('',#4471,#4935,#4937,.T.);+#4935 = VERTEX_POINT('',#4936);+#4936 = CARTESIAN_POINT('',(-1.34,-3.653021649751,0.704234328342));+#4937 = SURFACE_CURVE('',#4938,(#4943,#4950),.PCURVE_S1.);+#4938 = CIRCLE('',#4939,0.147);+#4939 = AXIS2_PLACEMENT_3D('',#4940,#4941,#4942);+#4940 = CARTESIAN_POINT('',(-1.34,-3.52308092439,0.6355));+#4941 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#4942 = DIRECTION('',(0.,0.,1.));+#4943 = PCURVE('',#4424,#4944);+#4944 = DEFINITIONAL_REPRESENTATION('',(#4945),#4949);+#4945 = CIRCLE('',#4946,0.147);+#4946 = AXIS2_PLACEMENT_2D('',#4947,#4948);+#4947 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#4948 = DIRECTION('',(1.,0.));+#4949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4950 = PCURVE('',#4509,#4951);+#4951 = DEFINITIONAL_REPRESENTATION('',(#4952),#4956);+#4952 = LINE('',#4953,#4954);+#4953 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#4954 = VECTOR('',#4955,1.);+#4955 = DIRECTION('',(1.,0.));+#4956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4957 = ORIENTED_EDGE('',*,*,#4958,.T.);+#4958 = EDGE_CURVE('',#4935,#4959,#4961,.T.);+#4959 = VERTEX_POINT('',#4960);+#4960 = CARTESIAN_POINT('',(-1.34,-3.958168154079,0.127361620474));+#4961 = SURFACE_CURVE('',#4962,(#4966,#4973),.PCURVE_S1.);+#4962 = LINE('',#4963,#4964);+#4963 = CARTESIAN_POINT('',(-1.34,-3.626407401915,0.754547974408));+#4964 = VECTOR('',#4965,1.);+#4965 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#4966 = PCURVE('',#4424,#4967);+#4967 = DEFINITIONAL_REPRESENTATION('',(#4968),#4972);+#4968 = LINE('',#4969,#4970);+#4969 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#4970 = VECTOR('',#4971,1.);+#4971 = DIRECTION('',(-0.883950512662,0.467580464908));+#4972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4973 = PCURVE('',#4587,#4974);+#4974 = DEFINITIONAL_REPRESENTATION('',(#4975),#4979);+#4975 = LINE('',#4976,#4977);+#4976 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#4977 = VECTOR('',#4978,1.);+#4978 = DIRECTION('',(1.,-2.399596746007E-32));+#4979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4980 = ORIENTED_EDGE('',*,*,#4981,.F.);+#4981 = EDGE_CURVE('',#4982,#4959,#4984,.T.);+#4982 = VERTEX_POINT('',#4983);+#4983 = CARTESIAN_POINT('',(-1.34,-3.99529407561,0.105));+#4984 = SURFACE_CURVE('',#4985,(#4990,#4997),.PCURVE_S1.);+#4985 = CIRCLE('',#4986,4.2E-02);+#4986 = AXIS2_PLACEMENT_3D('',#4987,#4988,#4989);+#4987 = CARTESIAN_POINT('',(-1.34,-3.99529407561,0.147));+#4988 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#4989 = DIRECTION('',(0.,0.,1.));+#4990 = PCURVE('',#4424,#4991);+#4991 = DEFINITIONAL_REPRESENTATION('',(#4992),#4996);+#4992 = CIRCLE('',#4993,4.2E-02);+#4993 = AXIS2_PLACEMENT_2D('',#4994,#4995);+#4994 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#4995 = DIRECTION('',(1.,0.));+#4996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4997 = PCURVE('',#4616,#4998);+#4998 = DEFINITIONAL_REPRESENTATION('',(#4999),#5003);+#4999 = LINE('',#5000,#5001);+#5000 = CARTESIAN_POINT('',(0.,-9.E-02));+#5001 = VECTOR('',#5002,1.);+#5002 = DIRECTION('',(1.,0.));+#5003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5004 = ORIENTED_EDGE('',*,*,#5005,.T.);+#5005 = EDGE_CURVE('',#4982,#5006,#5008,.T.);+#5006 = VERTEX_POINT('',#5007);+#5007 = CARTESIAN_POINT('',(-1.34,-4.43,0.105));+#5008 = SURFACE_CURVE('',#5009,(#5013,#5020),.PCURVE_S1.);+#5009 = LINE('',#5010,#5011);+#5010 = CARTESIAN_POINT('',(-1.34,-3.938375,0.105));+#5011 = VECTOR('',#5012,1.);+#5012 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5013 = PCURVE('',#4424,#5014);+#5014 = DEFINITIONAL_REPRESENTATION('',(#5015),#5019);+#5015 = LINE('',#5016,#5017);+#5016 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#5017 = VECTOR('',#5018,1.);+#5018 = DIRECTION('',(0.,1.));+#5019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5020 = PCURVE('',#4644,#5021);+#5021 = DEFINITIONAL_REPRESENTATION('',(#5022),#5026);+#5022 = LINE('',#5023,#5024);+#5023 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#5024 = VECTOR('',#5025,1.);+#5025 = DIRECTION('',(1.,0.));+#5026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5027 = ORIENTED_EDGE('',*,*,#5028,.T.);+#5028 = EDGE_CURVE('',#5006,#5029,#5031,.T.);+#5029 = VERTEX_POINT('',#5030);+#5030 = CARTESIAN_POINT('',(-1.34,-4.43,0.));+#5031 = SURFACE_CURVE('',#5032,(#5036,#5043),.PCURVE_S1.);+#5032 = LINE('',#5033,#5034);+#5033 = CARTESIAN_POINT('',(-1.34,-4.43,-8.142959240193E-02));+#5034 = VECTOR('',#5035,1.);+#5035 = DIRECTION('',(0.,0.,-1.));+#5036 = PCURVE('',#4424,#5037);+#5037 = DEFINITIONAL_REPRESENTATION('',(#5038),#5042);+#5038 = LINE('',#5039,#5040);+#5039 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#5040 = VECTOR('',#5041,1.);+#5041 = DIRECTION('',(-1.,0.));+#5042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5043 = PCURVE('',#4672,#5044);+#5044 = DEFINITIONAL_REPRESENTATION('',(#5045),#5049);+#5045 = LINE('',#5046,#5047);+#5046 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#5047 = VECTOR('',#5048,1.);+#5048 = DIRECTION('',(-1.,-0.));+#5049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5050 = ORIENTED_EDGE('',*,*,#5051,.F.);+#5051 = EDGE_CURVE('',#5052,#5029,#5054,.T.);+#5052 = VERTEX_POINT('',#5053);+#5053 = CARTESIAN_POINT('',(-1.34,-3.99529407561,0.));+#5054 = SURFACE_CURVE('',#5055,(#5059,#5066),.PCURVE_S1.);+#5055 = LINE('',#5056,#5057);+#5056 = CARTESIAN_POINT('',(-1.34,-3.938375,0.));+#5057 = VECTOR('',#5058,1.);+#5058 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5059 = PCURVE('',#4424,#5060);+#5060 = DEFINITIONAL_REPRESENTATION('',(#5061),#5065);+#5061 = LINE('',#5062,#5063);+#5062 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#5063 = VECTOR('',#5064,1.);+#5064 = DIRECTION('',(0.,1.));+#5065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5066 = PCURVE('',#4700,#5067);+#5067 = DEFINITIONAL_REPRESENTATION('',(#5068),#5072);+#5068 = LINE('',#5069,#5070);+#5069 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#5070 = VECTOR('',#5071,1.);+#5071 = DIRECTION('',(1.,0.));+#5072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5073 = ORIENTED_EDGE('',*,*,#5074,.T.);+#5074 = EDGE_CURVE('',#5052,#5075,#5077,.T.);+#5075 = VERTEX_POINT('',#5076);+#5076 = CARTESIAN_POINT('',(-1.34,-3.865353350249,7.826567165848E-02));+#5077 = SURFACE_CURVE('',#5078,(#5083,#5090),.PCURVE_S1.);+#5078 = CIRCLE('',#5079,0.147);+#5079 = AXIS2_PLACEMENT_3D('',#5080,#5081,#5082);+#5080 = CARTESIAN_POINT('',(-1.34,-3.99529407561,0.147));+#5081 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#5082 = DIRECTION('',(0.,0.,1.));+#5083 = PCURVE('',#4424,#5084);+#5084 = DEFINITIONAL_REPRESENTATION('',(#5085),#5089);+#5085 = CIRCLE('',#5086,0.147);+#5086 = AXIS2_PLACEMENT_2D('',#5087,#5088);+#5087 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#5088 = DIRECTION('',(1.,0.));+#5089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5090 = PCURVE('',#4729,#5091);+#5091 = DEFINITIONAL_REPRESENTATION('',(#5092),#5096);+#5092 = LINE('',#5093,#5094);+#5093 = CARTESIAN_POINT('',(0.,-9.E-02));+#5094 = VECTOR('',#5095,1.);+#5095 = DIRECTION('',(1.,0.));+#5096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5097 = ORIENTED_EDGE('',*,*,#5098,.F.);+#5098 = EDGE_CURVE('',#5099,#5075,#5101,.T.);+#5099 = VERTEX_POINT('',#5100);+#5100 = CARTESIAN_POINT('',(-1.34,-3.560206845921,0.655138379526));+#5101 = SURFACE_CURVE('',#5102,(#5106,#5113),.PCURVE_S1.);+#5102 = LINE('',#5103,#5104);+#5103 = CARTESIAN_POINT('',(-1.34,-3.533592598085,0.705452025592));+#5104 = VECTOR('',#5105,1.);+#5105 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#5106 = PCURVE('',#4424,#5107);+#5107 = DEFINITIONAL_REPRESENTATION('',(#5108),#5112);+#5108 = LINE('',#5109,#5110);+#5109 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#5110 = VECTOR('',#5111,1.);+#5111 = DIRECTION('',(-0.883950512662,0.467580464908));+#5112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5113 = PCURVE('',#4757,#5114);+#5114 = DEFINITIONAL_REPRESENTATION('',(#5115),#5119);+#5115 = LINE('',#5116,#5117);+#5116 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#5117 = VECTOR('',#5118,1.);+#5118 = DIRECTION('',(1.,-2.399596746007E-32));+#5119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5120 = ORIENTED_EDGE('',*,*,#5121,.F.);+#5121 = EDGE_CURVE('',#5122,#5099,#5124,.T.);+#5122 = VERTEX_POINT('',#5123);+#5123 = CARTESIAN_POINT('',(-1.34,-3.52308092439,0.6775));+#5124 = SURFACE_CURVE('',#5125,(#5130,#5137),.PCURVE_S1.);+#5125 = CIRCLE('',#5126,4.2E-02);+#5126 = AXIS2_PLACEMENT_3D('',#5127,#5128,#5129);+#5127 = CARTESIAN_POINT('',(-1.34,-3.52308092439,0.6355));+#5128 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#5129 = DIRECTION('',(0.,0.,1.));+#5130 = PCURVE('',#4424,#5131);+#5131 = DEFINITIONAL_REPRESENTATION('',(#5132),#5136);+#5132 = CIRCLE('',#5133,4.2E-02);+#5133 = AXIS2_PLACEMENT_2D('',#5134,#5135);+#5134 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#5135 = DIRECTION('',(1.,0.));+#5136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5137 = PCURVE('',#4786,#5138);+#5138 = DEFINITIONAL_REPRESENTATION('',(#5139),#5143);+#5139 = LINE('',#5140,#5141);+#5140 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#5141 = VECTOR('',#5142,1.);+#5142 = DIRECTION('',(1.,0.));+#5143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5144 = ORIENTED_EDGE('',*,*,#5145,.F.);+#5145 = EDGE_CURVE('',#5146,#5122,#5148,.T.);+#5146 = VERTEX_POINT('',#5147);+#5147 = CARTESIAN_POINT('',(-1.34,-3.25,0.6775));+#5148 = SURFACE_CURVE('',#5149,(#5153,#5160),.PCURVE_S1.);+#5149 = LINE('',#5150,#5151);+#5150 = CARTESIAN_POINT('',(-1.34,-3.25,0.6775));+#5151 = VECTOR('',#5152,1.);+#5152 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5153 = PCURVE('',#4424,#5154);+#5154 = DEFINITIONAL_REPRESENTATION('',(#5155),#5159);+#5155 = LINE('',#5156,#5157);+#5156 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#5157 = VECTOR('',#5158,1.);+#5158 = DIRECTION('',(0.,1.));+#5159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5160 = PCURVE('',#4814,#5161);+#5161 = DEFINITIONAL_REPRESENTATION('',(#5162),#5166);+#5162 = LINE('',#5163,#5164);+#5163 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#5164 = VECTOR('',#5165,1.);+#5165 = DIRECTION('',(1.,0.));+#5166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5167 = ORIENTED_EDGE('',*,*,#5168,.F.);+#5168 = EDGE_CURVE('',#4885,#5146,#5169,.T.);+#5169 = SURFACE_CURVE('',#5170,(#5175,#5186),.PCURVE_S1.);+#5170 = CIRCLE('',#5171,5.25E-02);+#5171 = AXIS2_PLACEMENT_3D('',#5172,#5173,#5174);+#5172 = CARTESIAN_POINT('',(-1.34,-3.25,0.73));+#5173 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5174 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5175 = PCURVE('',#4424,#5176);+#5176 = DEFINITIONAL_REPRESENTATION('',(#5177),#5185);+#5177 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5178,#5179,#5180,#5181,+#5182,#5183,#5184),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5178 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#5179 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#5180 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#5181 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#5182 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#5183 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#5184 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#5185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5186 = PCURVE('',#4847,#5187);+#5187 = DEFINITIONAL_REPRESENTATION('',(#5188),#5192);+#5188 = LINE('',#5189,#5190);+#5189 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#5190 = VECTOR('',#5191,1.);+#5191 = DIRECTION('',(-1.,0.));+#5192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5193 = ORIENTED_EDGE('',*,*,#4884,.F.);+#5194 = ADVANCED_FACE('',(#5195),#4509,.T.);+#5195 = FACE_BOUND('',#5196,.T.);+#5196 = EDGE_LOOP('',(#5197,#5198,#5199,#5220));+#5197 = ORIENTED_EDGE('',*,*,#4493,.F.);+#5198 = ORIENTED_EDGE('',*,*,#4934,.T.);+#5199 = ORIENTED_EDGE('',*,*,#5200,.T.);+#5200 = EDGE_CURVE('',#4935,#4548,#5201,.T.);+#5201 = SURFACE_CURVE('',#5202,(#5206,#5213),.PCURVE_S1.);+#5202 = LINE('',#5203,#5204);+#5203 = CARTESIAN_POINT('',(-1.34,-3.653021649751,0.704234328342));+#5204 = VECTOR('',#5205,1.);+#5205 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5206 = PCURVE('',#4509,#5207);+#5207 = DEFINITIONAL_REPRESENTATION('',(#5208),#5212);+#5208 = LINE('',#5209,#5210);+#5209 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#5210 = VECTOR('',#5211,1.);+#5211 = DIRECTION('',(-0.,1.));+#5212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5213 = PCURVE('',#4587,#5214);+#5214 = DEFINITIONAL_REPRESENTATION('',(#5215),#5219);+#5215 = LINE('',#5216,#5217);+#5216 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#5217 = VECTOR('',#5218,1.);+#5218 = DIRECTION('',(4.767113258106E-29,1.));+#5219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5220 = ORIENTED_EDGE('',*,*,#4547,.F.);+#5221 = ADVANCED_FACE('',(#5222),#4847,.T.);+#5222 = FACE_BOUND('',#5223,.T.);+#5223 = EDGE_LOOP('',(#5224,#5225,#5246,#5247));+#5224 = ORIENTED_EDGE('',*,*,#4826,.T.);+#5225 = ORIENTED_EDGE('',*,*,#5226,.T.);+#5226 = EDGE_CURVE('',#4799,#5146,#5227,.T.);+#5227 = SURFACE_CURVE('',#5228,(#5232,#5239),.PCURVE_S1.);+#5228 = LINE('',#5229,#5230);+#5229 = CARTESIAN_POINT('',(-1.16,-3.25,0.6775));+#5230 = VECTOR('',#5231,1.);+#5231 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5232 = PCURVE('',#4847,#5233);+#5233 = DEFINITIONAL_REPRESENTATION('',(#5234),#5238);+#5234 = LINE('',#5235,#5236);+#5235 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#5236 = VECTOR('',#5237,1.);+#5237 = DIRECTION('',(-0.,-1.));+#5238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5239 = PCURVE('',#4814,#5240);+#5240 = DEFINITIONAL_REPRESENTATION('',(#5241),#5245);+#5241 = LINE('',#5242,#5243);+#5242 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#5243 = VECTOR('',#5244,1.);+#5244 = DIRECTION('',(0.,-1.));+#5245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5246 = ORIENTED_EDGE('',*,*,#5168,.F.);+#5247 = ORIENTED_EDGE('',*,*,#4907,.T.);+#5248 = ADVANCED_FACE('',(#5249),#4814,.F.);+#5249 = FACE_BOUND('',#5250,.F.);+#5250 = EDGE_LOOP('',(#5251,#5252,#5273,#5274));+#5251 = ORIENTED_EDGE('',*,*,#5145,.T.);+#5252 = ORIENTED_EDGE('',*,*,#5253,.F.);+#5253 = EDGE_CURVE('',#4770,#5122,#5254,.T.);+#5254 = SURFACE_CURVE('',#5255,(#5259,#5266),.PCURVE_S1.);+#5255 = LINE('',#5256,#5257);+#5256 = CARTESIAN_POINT('',(-1.16,-3.52308092439,0.6775));+#5257 = VECTOR('',#5258,1.);+#5258 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5259 = PCURVE('',#4814,#5260);+#5260 = DEFINITIONAL_REPRESENTATION('',(#5261),#5265);+#5261 = LINE('',#5262,#5263);+#5262 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#5263 = VECTOR('',#5264,1.);+#5264 = DIRECTION('',(0.,-1.));+#5265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5266 = PCURVE('',#4786,#5267);+#5267 = DEFINITIONAL_REPRESENTATION('',(#5268),#5272);+#5268 = LINE('',#5269,#5270);+#5269 = CARTESIAN_POINT('',(0.,9.E-02));+#5270 = VECTOR('',#5271,1.);+#5271 = DIRECTION('',(0.,-1.));+#5272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5273 = ORIENTED_EDGE('',*,*,#4798,.F.);+#5274 = ORIENTED_EDGE('',*,*,#5226,.T.);+#5275 = ADVANCED_FACE('',(#5276),#4786,.F.);+#5276 = FACE_BOUND('',#5277,.F.);+#5277 = EDGE_LOOP('',(#5278,#5279,#5300,#5301));+#5278 = ORIENTED_EDGE('',*,*,#5121,.T.);+#5279 = ORIENTED_EDGE('',*,*,#5280,.F.);+#5280 = EDGE_CURVE('',#4742,#5099,#5281,.T.);+#5281 = SURFACE_CURVE('',#5282,(#5286,#5293),.PCURVE_S1.);+#5282 = LINE('',#5283,#5284);+#5283 = CARTESIAN_POINT('',(-1.16,-3.560206845921,0.655138379526));+#5284 = VECTOR('',#5285,1.);+#5285 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5286 = PCURVE('',#4786,#5287);+#5287 = DEFINITIONAL_REPRESENTATION('',(#5288),#5292);+#5288 = LINE('',#5289,#5290);+#5289 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#5290 = VECTOR('',#5291,1.);+#5291 = DIRECTION('',(0.,-1.));+#5292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5293 = PCURVE('',#4757,#5294);+#5294 = DEFINITIONAL_REPRESENTATION('',(#5295),#5299);+#5295 = LINE('',#5296,#5297);+#5296 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#5297 = VECTOR('',#5298,1.);+#5298 = DIRECTION('',(-4.767113258106E-29,-1.));+#5299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5300 = ORIENTED_EDGE('',*,*,#4769,.F.);+#5301 = ORIENTED_EDGE('',*,*,#5253,.T.);+#5302 = ADVANCED_FACE('',(#5303),#4757,.F.);+#5303 = FACE_BOUND('',#5304,.F.);+#5304 = EDGE_LOOP('',(#5305,#5306,#5327,#5328));+#5305 = ORIENTED_EDGE('',*,*,#5098,.T.);+#5306 = ORIENTED_EDGE('',*,*,#5307,.F.);+#5307 = EDGE_CURVE('',#4713,#5075,#5308,.T.);+#5308 = SURFACE_CURVE('',#5309,(#5313,#5320),.PCURVE_S1.);+#5309 = LINE('',#5310,#5311);+#5310 = CARTESIAN_POINT('',(-1.16,-3.865353350249,7.826567165848E-02));+#5311 = VECTOR('',#5312,1.);+#5312 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5313 = PCURVE('',#4757,#5314);+#5314 = DEFINITIONAL_REPRESENTATION('',(#5315),#5319);+#5315 = LINE('',#5316,#5317);+#5316 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#5317 = VECTOR('',#5318,1.);+#5318 = DIRECTION('',(-4.767113258106E-29,-1.));+#5319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5320 = PCURVE('',#4729,#5321);+#5321 = DEFINITIONAL_REPRESENTATION('',(#5322),#5326);+#5322 = LINE('',#5323,#5324);+#5323 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#5324 = VECTOR('',#5325,1.);+#5325 = DIRECTION('',(0.,-1.));+#5326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5327 = ORIENTED_EDGE('',*,*,#4741,.F.);+#5328 = ORIENTED_EDGE('',*,*,#5280,.T.);+#5329 = ADVANCED_FACE('',(#5330),#4729,.T.);+#5330 = FACE_BOUND('',#5331,.T.);+#5331 = EDGE_LOOP('',(#5332,#5333,#5334,#5335));+#5332 = ORIENTED_EDGE('',*,*,#5074,.T.);+#5333 = ORIENTED_EDGE('',*,*,#5307,.F.);+#5334 = ORIENTED_EDGE('',*,*,#4712,.F.);+#5335 = ORIENTED_EDGE('',*,*,#5336,.T.);+#5336 = EDGE_CURVE('',#4685,#5052,#5337,.T.);+#5337 = SURFACE_CURVE('',#5338,(#5342,#5349),.PCURVE_S1.);+#5338 = LINE('',#5339,#5340);+#5339 = CARTESIAN_POINT('',(-1.16,-3.99529407561,0.));+#5340 = VECTOR('',#5341,1.);+#5341 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5342 = PCURVE('',#4729,#5343);+#5343 = DEFINITIONAL_REPRESENTATION('',(#5344),#5348);+#5344 = LINE('',#5345,#5346);+#5345 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#5346 = VECTOR('',#5347,1.);+#5347 = DIRECTION('',(0.,-1.));+#5348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5349 = PCURVE('',#4700,#5350);+#5350 = DEFINITIONAL_REPRESENTATION('',(#5351),#5355);+#5351 = LINE('',#5352,#5353);+#5352 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#5353 = VECTOR('',#5354,1.);+#5354 = DIRECTION('',(0.,-1.));+#5355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5356 = ADVANCED_FACE('',(#5357),#4700,.F.);+#5357 = FACE_BOUND('',#5358,.F.);+#5358 = EDGE_LOOP('',(#5359,#5360,#5361,#5382));+#5359 = ORIENTED_EDGE('',*,*,#5336,.T.);+#5360 = ORIENTED_EDGE('',*,*,#5051,.T.);+#5361 = ORIENTED_EDGE('',*,*,#5362,.T.);+#5362 = EDGE_CURVE('',#5029,#4657,#5363,.T.);+#5363 = SURFACE_CURVE('',#5364,(#5368,#5375),.PCURVE_S1.);+#5364 = LINE('',#5365,#5366);+#5365 = CARTESIAN_POINT('',(-1.545,-4.43,0.));+#5366 = VECTOR('',#5367,1.);+#5367 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5368 = PCURVE('',#4700,#5369);+#5369 = DEFINITIONAL_REPRESENTATION('',(#5370),#5374);+#5370 = LINE('',#5371,#5372);+#5371 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#5372 = VECTOR('',#5373,1.);+#5373 = DIRECTION('',(0.,1.));+#5374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5375 = PCURVE('',#4672,#5376);+#5376 = DEFINITIONAL_REPRESENTATION('',(#5377),#5381);+#5377 = LINE('',#5378,#5379);+#5378 = CARTESIAN_POINT('',(0.5,-0.295));+#5379 = VECTOR('',#5380,1.);+#5380 = DIRECTION('',(0.,-1.));+#5381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5382 = ORIENTED_EDGE('',*,*,#4684,.F.);+#5383 = ADVANCED_FACE('',(#5384),#4672,.T.);+#5384 = FACE_BOUND('',#5385,.T.);+#5385 = EDGE_LOOP('',(#5386,#5387,#5408,#5409));+#5386 = ORIENTED_EDGE('',*,*,#4656,.F.);+#5387 = ORIENTED_EDGE('',*,*,#5388,.F.);+#5388 = EDGE_CURVE('',#5006,#4629,#5389,.T.);+#5389 = SURFACE_CURVE('',#5390,(#5394,#5401),.PCURVE_S1.);+#5390 = LINE('',#5391,#5392);+#5391 = CARTESIAN_POINT('',(-1.545,-4.43,0.105));+#5392 = VECTOR('',#5393,1.);+#5393 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5394 = PCURVE('',#4672,#5395);+#5395 = DEFINITIONAL_REPRESENTATION('',(#5396),#5400);+#5396 = LINE('',#5397,#5398);+#5397 = CARTESIAN_POINT('',(0.605,-0.295));+#5398 = VECTOR('',#5399,1.);+#5399 = DIRECTION('',(0.,-1.));+#5400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5401 = PCURVE('',#4644,#5402);+#5402 = DEFINITIONAL_REPRESENTATION('',(#5403),#5407);+#5403 = LINE('',#5404,#5405);+#5404 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#5405 = VECTOR('',#5406,1.);+#5406 = DIRECTION('',(0.,1.));+#5407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5408 = ORIENTED_EDGE('',*,*,#5028,.T.);+#5409 = ORIENTED_EDGE('',*,*,#5362,.T.);+#5410 = ADVANCED_FACE('',(#5411),#4644,.T.);+#5411 = FACE_BOUND('',#5412,.T.);+#5412 = EDGE_LOOP('',(#5413,#5434,#5435,#5436));+#5413 = ORIENTED_EDGE('',*,*,#5414,.T.);+#5414 = EDGE_CURVE('',#4600,#4982,#5415,.T.);+#5415 = SURFACE_CURVE('',#5416,(#5420,#5427),.PCURVE_S1.);+#5416 = LINE('',#5417,#5418);+#5417 = CARTESIAN_POINT('',(-1.16,-3.99529407561,0.105));+#5418 = VECTOR('',#5419,1.);+#5419 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5420 = PCURVE('',#4644,#5421);+#5421 = DEFINITIONAL_REPRESENTATION('',(#5422),#5426);+#5422 = LINE('',#5423,#5424);+#5423 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#5424 = VECTOR('',#5425,1.);+#5425 = DIRECTION('',(0.,-1.));+#5426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5427 = PCURVE('',#4616,#5428);+#5428 = DEFINITIONAL_REPRESENTATION('',(#5429),#5433);+#5429 = LINE('',#5430,#5431);+#5430 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#5431 = VECTOR('',#5432,1.);+#5432 = DIRECTION('',(0.,-1.));+#5433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5434 = ORIENTED_EDGE('',*,*,#5005,.T.);+#5435 = ORIENTED_EDGE('',*,*,#5388,.T.);+#5436 = ORIENTED_EDGE('',*,*,#4628,.F.);+#5437 = ADVANCED_FACE('',(#5438),#4616,.F.);+#5438 = FACE_BOUND('',#5439,.F.);+#5439 = EDGE_LOOP('',(#5440,#5441,#5462,#5463));+#5440 = ORIENTED_EDGE('',*,*,#4981,.T.);+#5441 = ORIENTED_EDGE('',*,*,#5442,.F.);+#5442 = EDGE_CURVE('',#4572,#4959,#5443,.T.);+#5443 = SURFACE_CURVE('',#5444,(#5448,#5455),.PCURVE_S1.);+#5444 = LINE('',#5445,#5446);+#5445 = CARTESIAN_POINT('',(-1.16,-3.958168154079,0.127361620474));+#5446 = VECTOR('',#5447,1.);+#5447 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5448 = PCURVE('',#4616,#5449);+#5449 = DEFINITIONAL_REPRESENTATION('',(#5450),#5454);+#5450 = LINE('',#5451,#5452);+#5451 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#5452 = VECTOR('',#5453,1.);+#5453 = DIRECTION('',(0.,-1.));+#5454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5455 = PCURVE('',#4587,#5456);+#5456 = DEFINITIONAL_REPRESENTATION('',(#5457),#5461);+#5457 = LINE('',#5458,#5459);+#5458 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#5459 = VECTOR('',#5460,1.);+#5460 = DIRECTION('',(-4.767113258106E-29,-1.));+#5461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5462 = ORIENTED_EDGE('',*,*,#4599,.F.);+#5463 = ORIENTED_EDGE('',*,*,#5414,.T.);+#5464 = ADVANCED_FACE('',(#5465),#4587,.T.);+#5465 = FACE_BOUND('',#5466,.T.);+#5466 = EDGE_LOOP('',(#5467,#5468,#5469,#5470));+#5467 = ORIENTED_EDGE('',*,*,#5200,.F.);+#5468 = ORIENTED_EDGE('',*,*,#4958,.T.);+#5469 = ORIENTED_EDGE('',*,*,#5442,.F.);+#5470 = ORIENTED_EDGE('',*,*,#4571,.F.);+#5471 = MANIFOLD_SOLID_BREP('',#5472);+#5472 = CLOSED_SHELL('',(#5473,#5603,#5679,#6017,#6066,#6332,#6359,#6386+ ,#6413,#6440,#6467,#6494,#6521,#6548,#6575,#6602));+#5473 = ADVANCED_FACE('',(#5474),#5489,.T.);+#5474 = FACE_BOUND('',#5475,.T.);+#5475 = EDGE_LOOP('',(#5476,#5516,#5544,#5577));+#5476 = ORIENTED_EDGE('',*,*,#5477,.T.);+#5477 = EDGE_CURVE('',#5478,#5480,#5482,.T.);+#5478 = VERTEX_POINT('',#5479);+#5479 = CARTESIAN_POINT('',(-0.66,-3.25,0.7825));+#5480 = VERTEX_POINT('',#5481);+#5481 = CARTESIAN_POINT('',(-0.66,-3.2,0.746007810594));+#5482 = SURFACE_CURVE('',#5483,(#5488,#5500),.PCURVE_S1.);+#5483 = CIRCLE('',#5484,5.25E-02);+#5484 = AXIS2_PLACEMENT_3D('',#5485,#5486,#5487);+#5485 = CARTESIAN_POINT('',(-0.66,-3.25,0.73));+#5486 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5487 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5488 = PCURVE('',#5489,#5494);+#5489 = CYLINDRICAL_SURFACE('',#5490,5.25E-02);+#5490 = AXIS2_PLACEMENT_3D('',#5491,#5492,#5493);+#5491 = CARTESIAN_POINT('',(-0.75,-3.25,0.73));+#5492 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5493 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5494 = DEFINITIONAL_REPRESENTATION('',(#5495),#5499);+#5495 = LINE('',#5496,#5497);+#5496 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#5497 = VECTOR('',#5498,1.);+#5498 = DIRECTION('',(-1.,-0.));+#5499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5500 = PCURVE('',#5501,#5506);+#5501 = PLANE('',#5502);+#5502 = AXIS2_PLACEMENT_3D('',#5503,#5504,#5505);+#5503 = CARTESIAN_POINT('',(-0.66,-3.861815252728,0.337140815196));+#5504 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5505 = DIRECTION('',(0.,0.,1.));+#5506 = DEFINITIONAL_REPRESENTATION('',(#5507),#5515);+#5507 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5508,#5509,#5510,#5511,+#5512,#5513,#5514),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5508 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#5509 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#5510 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#5511 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#5512 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#5513 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#5514 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#5515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5516 = ORIENTED_EDGE('',*,*,#5517,.F.);+#5517 = EDGE_CURVE('',#5518,#5480,#5520,.T.);+#5518 = VERTEX_POINT('',#5519);+#5519 = CARTESIAN_POINT('',(-0.84,-3.2,0.746007810594));+#5520 = SURFACE_CURVE('',#5521,(#5525,#5532),.PCURVE_S1.);+#5521 = LINE('',#5522,#5523);+#5522 = CARTESIAN_POINT('',(-0.75,-3.2,0.746007810594));+#5523 = VECTOR('',#5524,1.);+#5524 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5525 = PCURVE('',#5489,#5526);+#5526 = DEFINITIONAL_REPRESENTATION('',(#5527),#5531);+#5527 = LINE('',#5528,#5529);+#5528 = CARTESIAN_POINT('',(3.451437293332,0.));+#5529 = VECTOR('',#5530,1.);+#5530 = DIRECTION('',(-0.,1.));+#5531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5532 = PCURVE('',#5533,#5538);+#5533 = PLANE('',#5534);+#5534 = AXIS2_PLACEMENT_3D('',#5535,#5536,#5537);+#5535 = CARTESIAN_POINT('',(-1.34,-3.2,-0.5));+#5536 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5537 = DIRECTION('',(0.,0.,1.));+#5538 = DEFINITIONAL_REPRESENTATION('',(#5539),#5543);+#5539 = LINE('',#5540,#5541);+#5540 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#5541 = VECTOR('',#5542,1.);+#5542 = DIRECTION('',(0.,-1.));+#5543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5544 = ORIENTED_EDGE('',*,*,#5545,.F.);+#5545 = EDGE_CURVE('',#5546,#5518,#5548,.T.);+#5546 = VERTEX_POINT('',#5547);+#5547 = CARTESIAN_POINT('',(-0.84,-3.25,0.7825));+#5548 = SURFACE_CURVE('',#5549,(#5554,#5561),.PCURVE_S1.);+#5549 = CIRCLE('',#5550,5.25E-02);+#5550 = AXIS2_PLACEMENT_3D('',#5551,#5552,#5553);+#5551 = CARTESIAN_POINT('',(-0.84,-3.25,0.73));+#5552 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5553 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5554 = PCURVE('',#5489,#5555);+#5555 = DEFINITIONAL_REPRESENTATION('',(#5556),#5560);+#5556 = LINE('',#5557,#5558);+#5557 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#5558 = VECTOR('',#5559,1.);+#5559 = DIRECTION('',(-1.,0.));+#5560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5561 = PCURVE('',#5562,#5567);+#5562 = PLANE('',#5563);+#5563 = AXIS2_PLACEMENT_3D('',#5564,#5565,#5566);+#5564 = CARTESIAN_POINT('',(-0.84,-3.861815252728,0.337140815196));+#5565 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5566 = DIRECTION('',(0.,0.,1.));+#5567 = DEFINITIONAL_REPRESENTATION('',(#5568),#5576);+#5568 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5569,#5570,#5571,#5572,+#5573,#5574,#5575),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5569 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#5570 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#5571 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#5572 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#5573 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#5574 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#5575 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#5576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5577 = ORIENTED_EDGE('',*,*,#5578,.T.);+#5578 = EDGE_CURVE('',#5546,#5478,#5579,.T.);+#5579 = SURFACE_CURVE('',#5580,(#5584,#5591),.PCURVE_S1.);+#5580 = LINE('',#5581,#5582);+#5581 = CARTESIAN_POINT('',(-0.84,-3.25,0.7825));+#5582 = VECTOR('',#5583,1.);+#5583 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5584 = PCURVE('',#5489,#5585);+#5585 = DEFINITIONAL_REPRESENTATION('',(#5586),#5590);+#5586 = LINE('',#5587,#5588);+#5587 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#5588 = VECTOR('',#5589,1.);+#5589 = DIRECTION('',(0.,1.));+#5590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5591 = PCURVE('',#5592,#5597);+#5592 = PLANE('',#5593);+#5593 = AXIS2_PLACEMENT_3D('',#5594,#5595,#5596);+#5594 = CARTESIAN_POINT('',(-0.75,-3.25,0.7825));+#5595 = DIRECTION('',(0.,0.,1.));+#5596 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5597 = DEFINITIONAL_REPRESENTATION('',(#5598),#5602);+#5598 = LINE('',#5599,#5600);+#5599 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#5600 = VECTOR('',#5601,1.);+#5601 = DIRECTION('',(0.,1.));+#5602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5603 = ADVANCED_FACE('',(#5604),#5592,.T.);+#5604 = FACE_BOUND('',#5605,.T.);+#5605 = EDGE_LOOP('',(#5606,#5607,#5630,#5658));+#5606 = ORIENTED_EDGE('',*,*,#5578,.F.);+#5607 = ORIENTED_EDGE('',*,*,#5608,.T.);+#5608 = EDGE_CURVE('',#5546,#5609,#5611,.T.);+#5609 = VERTEX_POINT('',#5610);+#5610 = CARTESIAN_POINT('',(-0.84,-3.52308092439,0.7825));+#5611 = SURFACE_CURVE('',#5612,(#5616,#5623),.PCURVE_S1.);+#5612 = LINE('',#5613,#5614);+#5613 = CARTESIAN_POINT('',(-0.84,-3.25,0.7825));+#5614 = VECTOR('',#5615,1.);+#5615 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5616 = PCURVE('',#5592,#5617);+#5617 = DEFINITIONAL_REPRESENTATION('',(#5618),#5622);+#5618 = LINE('',#5619,#5620);+#5619 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#5620 = VECTOR('',#5621,1.);+#5621 = DIRECTION('',(1.,0.));+#5622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5623 = PCURVE('',#5562,#5624);+#5624 = DEFINITIONAL_REPRESENTATION('',(#5625),#5629);+#5625 = LINE('',#5626,#5627);+#5626 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#5627 = VECTOR('',#5628,1.);+#5628 = DIRECTION('',(0.,1.));+#5629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5630 = ORIENTED_EDGE('',*,*,#5631,.T.);+#5631 = EDGE_CURVE('',#5609,#5632,#5634,.T.);+#5632 = VERTEX_POINT('',#5633);+#5633 = CARTESIAN_POINT('',(-0.66,-3.52308092439,0.7825));+#5634 = SURFACE_CURVE('',#5635,(#5639,#5646),.PCURVE_S1.);+#5635 = LINE('',#5636,#5637);+#5636 = CARTESIAN_POINT('',(-0.84,-3.52308092439,0.7825));+#5637 = VECTOR('',#5638,1.);+#5638 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5639 = PCURVE('',#5592,#5640);+#5640 = DEFINITIONAL_REPRESENTATION('',(#5641),#5645);+#5641 = LINE('',#5642,#5643);+#5642 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#5643 = VECTOR('',#5644,1.);+#5644 = DIRECTION('',(0.,1.));+#5645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5646 = PCURVE('',#5647,#5652);+#5647 = CYLINDRICAL_SURFACE('',#5648,0.147);+#5648 = AXIS2_PLACEMENT_3D('',#5649,#5650,#5651);+#5649 = CARTESIAN_POINT('',(-0.75,-3.52308092439,0.6355));+#5650 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5651 = DIRECTION('',(0.,0.,1.));+#5652 = DEFINITIONAL_REPRESENTATION('',(#5653),#5657);+#5653 = LINE('',#5654,#5655);+#5654 = CARTESIAN_POINT('',(0.,-9.E-02));+#5655 = VECTOR('',#5656,1.);+#5656 = DIRECTION('',(-0.,1.));+#5657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5658 = ORIENTED_EDGE('',*,*,#5659,.F.);+#5659 = EDGE_CURVE('',#5478,#5632,#5660,.T.);+#5660 = SURFACE_CURVE('',#5661,(#5665,#5672),.PCURVE_S1.);+#5661 = LINE('',#5662,#5663);+#5662 = CARTESIAN_POINT('',(-0.66,-3.25,0.7825));+#5663 = VECTOR('',#5664,1.);+#5664 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5665 = PCURVE('',#5592,#5666);+#5666 = DEFINITIONAL_REPRESENTATION('',(#5667),#5671);+#5667 = LINE('',#5668,#5669);+#5668 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#5669 = VECTOR('',#5670,1.);+#5670 = DIRECTION('',(1.,0.));+#5671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5672 = PCURVE('',#5501,#5673);+#5673 = DEFINITIONAL_REPRESENTATION('',(#5674),#5678);+#5674 = LINE('',#5675,#5676);+#5675 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#5676 = VECTOR('',#5677,1.);+#5677 = DIRECTION('',(0.,1.));+#5678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5679 = ADVANCED_FACE('',(#5680),#5501,.T.);+#5680 = FACE_BOUND('',#5681,.T.);+#5681 = EDGE_LOOP('',(#5682,#5683,#5684,#5708,#5736,#5765,#5793,#5821,+ #5849,#5878,#5906,#5935,#5963,#5996));+#5682 = ORIENTED_EDGE('',*,*,#5477,.F.);+#5683 = ORIENTED_EDGE('',*,*,#5659,.T.);+#5684 = ORIENTED_EDGE('',*,*,#5685,.T.);+#5685 = EDGE_CURVE('',#5632,#5686,#5688,.T.);+#5686 = VERTEX_POINT('',#5687);+#5687 = CARTESIAN_POINT('',(-0.66,-3.653021649751,0.704234328342));+#5688 = SURFACE_CURVE('',#5689,(#5694,#5701),.PCURVE_S1.);+#5689 = CIRCLE('',#5690,0.147);+#5690 = AXIS2_PLACEMENT_3D('',#5691,#5692,#5693);+#5691 = CARTESIAN_POINT('',(-0.66,-3.52308092439,0.6355));+#5692 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#5693 = DIRECTION('',(0.,0.,1.));+#5694 = PCURVE('',#5501,#5695);+#5695 = DEFINITIONAL_REPRESENTATION('',(#5696),#5700);+#5696 = CIRCLE('',#5697,0.147);+#5697 = AXIS2_PLACEMENT_2D('',#5698,#5699);+#5698 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#5699 = DIRECTION('',(1.,0.));+#5700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5701 = PCURVE('',#5647,#5702);+#5702 = DEFINITIONAL_REPRESENTATION('',(#5703),#5707);+#5703 = LINE('',#5704,#5705);+#5704 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#5705 = VECTOR('',#5706,1.);+#5706 = DIRECTION('',(1.,-0.));+#5707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5708 = ORIENTED_EDGE('',*,*,#5709,.T.);+#5709 = EDGE_CURVE('',#5686,#5710,#5712,.T.);+#5710 = VERTEX_POINT('',#5711);+#5711 = CARTESIAN_POINT('',(-0.66,-3.958168154079,0.127361620474));+#5712 = SURFACE_CURVE('',#5713,(#5717,#5724),.PCURVE_S1.);+#5713 = LINE('',#5714,#5715);+#5714 = CARTESIAN_POINT('',(-0.66,-3.626407401915,0.754547974408));+#5715 = VECTOR('',#5716,1.);+#5716 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#5717 = PCURVE('',#5501,#5718);+#5718 = DEFINITIONAL_REPRESENTATION('',(#5719),#5723);+#5719 = LINE('',#5720,#5721);+#5720 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#5721 = VECTOR('',#5722,1.);+#5722 = DIRECTION('',(-0.883950512662,0.467580464908));+#5723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5724 = PCURVE('',#5725,#5730);+#5725 = PLANE('',#5726);+#5726 = AXIS2_PLACEMENT_3D('',#5727,#5728,#5729);+#5727 = CARTESIAN_POINT('',(-0.75,-3.653021649751,0.704234328342));+#5728 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#5729 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#5730 = DEFINITIONAL_REPRESENTATION('',(#5731),#5735);+#5731 = LINE('',#5732,#5733);+#5732 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#5733 = VECTOR('',#5734,1.);+#5734 = DIRECTION('',(1.,-2.399596746007E-32));+#5735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5736 = ORIENTED_EDGE('',*,*,#5737,.F.);+#5737 = EDGE_CURVE('',#5738,#5710,#5740,.T.);+#5738 = VERTEX_POINT('',#5739);+#5739 = CARTESIAN_POINT('',(-0.66,-3.99529407561,0.105));+#5740 = SURFACE_CURVE('',#5741,(#5746,#5753),.PCURVE_S1.);+#5741 = CIRCLE('',#5742,4.2E-02);+#5742 = AXIS2_PLACEMENT_3D('',#5743,#5744,#5745);+#5743 = CARTESIAN_POINT('',(-0.66,-3.99529407561,0.147));+#5744 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#5745 = DIRECTION('',(0.,0.,1.));+#5746 = PCURVE('',#5501,#5747);+#5747 = DEFINITIONAL_REPRESENTATION('',(#5748),#5752);+#5748 = CIRCLE('',#5749,4.2E-02);+#5749 = AXIS2_PLACEMENT_2D('',#5750,#5751);+#5750 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#5751 = DIRECTION('',(1.,0.));+#5752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5753 = PCURVE('',#5754,#5759);+#5754 = CYLINDRICAL_SURFACE('',#5755,4.2E-02);+#5755 = AXIS2_PLACEMENT_3D('',#5756,#5757,#5758);+#5756 = CARTESIAN_POINT('',(-0.75,-3.99529407561,0.147));+#5757 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5758 = DIRECTION('',(0.,0.,1.));+#5759 = DEFINITIONAL_REPRESENTATION('',(#5760),#5764);+#5760 = LINE('',#5761,#5762);+#5761 = CARTESIAN_POINT('',(-0.,9.E-02));+#5762 = VECTOR('',#5763,1.);+#5763 = DIRECTION('',(1.,-0.));+#5764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5765 = ORIENTED_EDGE('',*,*,#5766,.T.);+#5766 = EDGE_CURVE('',#5738,#5767,#5769,.T.);+#5767 = VERTEX_POINT('',#5768);+#5768 = CARTESIAN_POINT('',(-0.66,-4.43,0.105));+#5769 = SURFACE_CURVE('',#5770,(#5774,#5781),.PCURVE_S1.);+#5770 = LINE('',#5771,#5772);+#5771 = CARTESIAN_POINT('',(-0.66,-3.938375,0.105));+#5772 = VECTOR('',#5773,1.);+#5773 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5774 = PCURVE('',#5501,#5775);+#5775 = DEFINITIONAL_REPRESENTATION('',(#5776),#5780);+#5776 = LINE('',#5777,#5778);+#5777 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#5778 = VECTOR('',#5779,1.);+#5779 = DIRECTION('',(0.,1.));+#5780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5781 = PCURVE('',#5782,#5787);+#5782 = PLANE('',#5783);+#5783 = AXIS2_PLACEMENT_3D('',#5784,#5785,#5786);+#5784 = CARTESIAN_POINT('',(-0.75,-3.99529407561,0.105));+#5785 = DIRECTION('',(0.,0.,1.));+#5786 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5787 = DEFINITIONAL_REPRESENTATION('',(#5788),#5792);+#5788 = LINE('',#5789,#5790);+#5789 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#5790 = VECTOR('',#5791,1.);+#5791 = DIRECTION('',(1.,0.));+#5792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5793 = ORIENTED_EDGE('',*,*,#5794,.T.);+#5794 = EDGE_CURVE('',#5767,#5795,#5797,.T.);+#5795 = VERTEX_POINT('',#5796);+#5796 = CARTESIAN_POINT('',(-0.66,-4.43,0.));+#5797 = SURFACE_CURVE('',#5798,(#5802,#5809),.PCURVE_S1.);+#5798 = LINE('',#5799,#5800);+#5799 = CARTESIAN_POINT('',(-0.66,-4.43,-8.142959240193E-02));+#5800 = VECTOR('',#5801,1.);+#5801 = DIRECTION('',(0.,0.,-1.));+#5802 = PCURVE('',#5501,#5803);+#5803 = DEFINITIONAL_REPRESENTATION('',(#5804),#5808);+#5804 = LINE('',#5805,#5806);+#5805 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#5806 = VECTOR('',#5807,1.);+#5807 = DIRECTION('',(-1.,0.));+#5808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5809 = PCURVE('',#5810,#5815);+#5810 = PLANE('',#5811);+#5811 = AXIS2_PLACEMENT_3D('',#5812,#5813,#5814);+#5812 = CARTESIAN_POINT('',(-1.34,-4.43,-0.5));+#5813 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5814 = DIRECTION('',(0.,0.,1.));+#5815 = DEFINITIONAL_REPRESENTATION('',(#5816),#5820);+#5816 = LINE('',#5817,#5818);+#5817 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#5818 = VECTOR('',#5819,1.);+#5819 = DIRECTION('',(-1.,-0.));+#5820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5821 = ORIENTED_EDGE('',*,*,#5822,.F.);+#5822 = EDGE_CURVE('',#5823,#5795,#5825,.T.);+#5823 = VERTEX_POINT('',#5824);+#5824 = CARTESIAN_POINT('',(-0.66,-3.99529407561,0.));+#5825 = SURFACE_CURVE('',#5826,(#5830,#5837),.PCURVE_S1.);+#5826 = LINE('',#5827,#5828);+#5827 = CARTESIAN_POINT('',(-0.66,-3.938375,0.));+#5828 = VECTOR('',#5829,1.);+#5829 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5830 = PCURVE('',#5501,#5831);+#5831 = DEFINITIONAL_REPRESENTATION('',(#5832),#5836);+#5832 = LINE('',#5833,#5834);+#5833 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#5834 = VECTOR('',#5835,1.);+#5835 = DIRECTION('',(0.,1.));+#5836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5837 = PCURVE('',#5838,#5843);+#5838 = PLANE('',#5839);+#5839 = AXIS2_PLACEMENT_3D('',#5840,#5841,#5842);+#5840 = CARTESIAN_POINT('',(-0.75,-3.99529407561,0.));+#5841 = DIRECTION('',(0.,0.,1.));+#5842 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5843 = DEFINITIONAL_REPRESENTATION('',(#5844),#5848);+#5844 = LINE('',#5845,#5846);+#5845 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#5846 = VECTOR('',#5847,1.);+#5847 = DIRECTION('',(1.,0.));+#5848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5849 = ORIENTED_EDGE('',*,*,#5850,.T.);+#5850 = EDGE_CURVE('',#5823,#5851,#5853,.T.);+#5851 = VERTEX_POINT('',#5852);+#5852 = CARTESIAN_POINT('',(-0.66,-3.865353350249,7.826567165848E-02));+#5853 = SURFACE_CURVE('',#5854,(#5859,#5866),.PCURVE_S1.);+#5854 = CIRCLE('',#5855,0.147);+#5855 = AXIS2_PLACEMENT_3D('',#5856,#5857,#5858);+#5856 = CARTESIAN_POINT('',(-0.66,-3.99529407561,0.147));+#5857 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#5858 = DIRECTION('',(0.,0.,1.));+#5859 = PCURVE('',#5501,#5860);+#5860 = DEFINITIONAL_REPRESENTATION('',(#5861),#5865);+#5861 = CIRCLE('',#5862,0.147);+#5862 = AXIS2_PLACEMENT_2D('',#5863,#5864);+#5863 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#5864 = DIRECTION('',(1.,0.));+#5865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5866 = PCURVE('',#5867,#5872);+#5867 = CYLINDRICAL_SURFACE('',#5868,0.147);+#5868 = AXIS2_PLACEMENT_3D('',#5869,#5870,#5871);+#5869 = CARTESIAN_POINT('',(-0.75,-3.99529407561,0.147));+#5870 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5871 = DIRECTION('',(0.,0.,1.));+#5872 = DEFINITIONAL_REPRESENTATION('',(#5873),#5877);+#5873 = LINE('',#5874,#5875);+#5874 = CARTESIAN_POINT('',(-0.,9.E-02));+#5875 = VECTOR('',#5876,1.);+#5876 = DIRECTION('',(1.,-0.));+#5877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5878 = ORIENTED_EDGE('',*,*,#5879,.F.);+#5879 = EDGE_CURVE('',#5880,#5851,#5882,.T.);+#5880 = VERTEX_POINT('',#5881);+#5881 = CARTESIAN_POINT('',(-0.66,-3.560206845921,0.655138379526));+#5882 = SURFACE_CURVE('',#5883,(#5887,#5894),.PCURVE_S1.);+#5883 = LINE('',#5884,#5885);+#5884 = CARTESIAN_POINT('',(-0.66,-3.533592598085,0.705452025592));+#5885 = VECTOR('',#5886,1.);+#5886 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#5887 = PCURVE('',#5501,#5888);+#5888 = DEFINITIONAL_REPRESENTATION('',(#5889),#5893);+#5889 = LINE('',#5890,#5891);+#5890 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#5891 = VECTOR('',#5892,1.);+#5892 = DIRECTION('',(-0.883950512662,0.467580464908));+#5893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5894 = PCURVE('',#5895,#5900);+#5895 = PLANE('',#5896);+#5896 = AXIS2_PLACEMENT_3D('',#5897,#5898,#5899);+#5897 = CARTESIAN_POINT('',(-0.75,-3.560206845921,0.655138379526));+#5898 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#5899 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#5900 = DEFINITIONAL_REPRESENTATION('',(#5901),#5905);+#5901 = LINE('',#5902,#5903);+#5902 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#5903 = VECTOR('',#5904,1.);+#5904 = DIRECTION('',(1.,-2.399596746007E-32));+#5905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5906 = ORIENTED_EDGE('',*,*,#5907,.F.);+#5907 = EDGE_CURVE('',#5908,#5880,#5910,.T.);+#5908 = VERTEX_POINT('',#5909);+#5909 = CARTESIAN_POINT('',(-0.66,-3.52308092439,0.6775));+#5910 = SURFACE_CURVE('',#5911,(#5916,#5923),.PCURVE_S1.);+#5911 = CIRCLE('',#5912,4.2E-02);+#5912 = AXIS2_PLACEMENT_3D('',#5913,#5914,#5915);+#5913 = CARTESIAN_POINT('',(-0.66,-3.52308092439,0.6355));+#5914 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#5915 = DIRECTION('',(0.,0.,1.));+#5916 = PCURVE('',#5501,#5917);+#5917 = DEFINITIONAL_REPRESENTATION('',(#5918),#5922);+#5918 = CIRCLE('',#5919,4.2E-02);+#5919 = AXIS2_PLACEMENT_2D('',#5920,#5921);+#5920 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#5921 = DIRECTION('',(1.,0.));+#5922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5923 = PCURVE('',#5924,#5929);+#5924 = CYLINDRICAL_SURFACE('',#5925,4.2E-02);+#5925 = AXIS2_PLACEMENT_3D('',#5926,#5927,#5928);+#5926 = CARTESIAN_POINT('',(-0.75,-3.52308092439,0.6355));+#5927 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5928 = DIRECTION('',(0.,0.,1.));+#5929 = DEFINITIONAL_REPRESENTATION('',(#5930),#5934);+#5930 = LINE('',#5931,#5932);+#5931 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#5932 = VECTOR('',#5933,1.);+#5933 = DIRECTION('',(1.,-0.));+#5934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5935 = ORIENTED_EDGE('',*,*,#5936,.F.);+#5936 = EDGE_CURVE('',#5937,#5908,#5939,.T.);+#5937 = VERTEX_POINT('',#5938);+#5938 = CARTESIAN_POINT('',(-0.66,-3.25,0.6775));+#5939 = SURFACE_CURVE('',#5940,(#5944,#5951),.PCURVE_S1.);+#5940 = LINE('',#5941,#5942);+#5941 = CARTESIAN_POINT('',(-0.66,-3.25,0.6775));+#5942 = VECTOR('',#5943,1.);+#5943 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5944 = PCURVE('',#5501,#5945);+#5945 = DEFINITIONAL_REPRESENTATION('',(#5946),#5950);+#5946 = LINE('',#5947,#5948);+#5947 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#5948 = VECTOR('',#5949,1.);+#5949 = DIRECTION('',(0.,1.));+#5950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5951 = PCURVE('',#5952,#5957);+#5952 = PLANE('',#5953);+#5953 = AXIS2_PLACEMENT_3D('',#5954,#5955,#5956);+#5954 = CARTESIAN_POINT('',(-0.75,-3.25,0.6775));+#5955 = DIRECTION('',(0.,0.,1.));+#5956 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5957 = DEFINITIONAL_REPRESENTATION('',(#5958),#5962);+#5958 = LINE('',#5959,#5960);+#5959 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#5960 = VECTOR('',#5961,1.);+#5961 = DIRECTION('',(1.,0.));+#5962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5963 = ORIENTED_EDGE('',*,*,#5964,.F.);+#5964 = EDGE_CURVE('',#5965,#5937,#5967,.T.);+#5965 = VERTEX_POINT('',#5966);+#5966 = CARTESIAN_POINT('',(-0.66,-3.2,0.713992189406));+#5967 = SURFACE_CURVE('',#5968,(#5973,#5984),.PCURVE_S1.);+#5968 = CIRCLE('',#5969,5.25E-02);+#5969 = AXIS2_PLACEMENT_3D('',#5970,#5971,#5972);+#5970 = CARTESIAN_POINT('',(-0.66,-3.25,0.73));+#5971 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#5972 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5973 = PCURVE('',#5501,#5974);+#5974 = DEFINITIONAL_REPRESENTATION('',(#5975),#5983);+#5975 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5976,#5977,#5978,#5979,+#5980,#5981,#5982),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#5976 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#5977 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#5978 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#5979 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#5980 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#5981 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#5982 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#5983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5984 = PCURVE('',#5985,#5990);+#5985 = CYLINDRICAL_SURFACE('',#5986,5.25E-02);+#5986 = AXIS2_PLACEMENT_3D('',#5987,#5988,#5989);+#5987 = CARTESIAN_POINT('',(-0.75,-3.25,0.73));+#5988 = DIRECTION('',(1.,1.110223024625E-16,0.));+#5989 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#5990 = DEFINITIONAL_REPRESENTATION('',(#5991),#5995);+#5991 = LINE('',#5992,#5993);+#5992 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#5993 = VECTOR('',#5994,1.);+#5994 = DIRECTION('',(-1.,-0.));+#5995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5996 = ORIENTED_EDGE('',*,*,#5997,.F.);+#5997 = EDGE_CURVE('',#5480,#5965,#5998,.T.);+#5998 = SURFACE_CURVE('',#5999,(#6003,#6010),.PCURVE_S1.);+#5999 = LINE('',#6000,#6001);+#6000 = CARTESIAN_POINT('',(-0.66,-3.2,-8.142959240193E-02));+#6001 = VECTOR('',#6002,1.);+#6002 = DIRECTION('',(0.,0.,-1.));+#6003 = PCURVE('',#5501,#6004);+#6004 = DEFINITIONAL_REPRESENTATION('',(#6005),#6009);+#6005 = LINE('',#6006,#6007);+#6006 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#6007 = VECTOR('',#6008,1.);+#6008 = DIRECTION('',(-1.,0.));+#6009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6010 = PCURVE('',#5533,#6011);+#6011 = DEFINITIONAL_REPRESENTATION('',(#6012),#6016);+#6012 = LINE('',#6013,#6014);+#6013 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#6014 = VECTOR('',#6015,1.);+#6015 = DIRECTION('',(-1.,-0.));+#6016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6017 = ADVANCED_FACE('',(#6018),#5533,.F.);+#6018 = FACE_BOUND('',#6019,.F.);+#6019 = EDGE_LOOP('',(#6020,#6021,#6044,#6065));+#6020 = ORIENTED_EDGE('',*,*,#5517,.F.);+#6021 = ORIENTED_EDGE('',*,*,#6022,.T.);+#6022 = EDGE_CURVE('',#5518,#6023,#6025,.T.);+#6023 = VERTEX_POINT('',#6024);+#6024 = CARTESIAN_POINT('',(-0.84,-3.2,0.713992189406));+#6025 = SURFACE_CURVE('',#6026,(#6030,#6037),.PCURVE_S1.);+#6026 = LINE('',#6027,#6028);+#6027 = CARTESIAN_POINT('',(-0.84,-3.2,-8.142959240193E-02));+#6028 = VECTOR('',#6029,1.);+#6029 = DIRECTION('',(0.,0.,-1.));+#6030 = PCURVE('',#5533,#6031);+#6031 = DEFINITIONAL_REPRESENTATION('',(#6032),#6036);+#6032 = LINE('',#6033,#6034);+#6033 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#6034 = VECTOR('',#6035,1.);+#6035 = DIRECTION('',(-1.,-0.));+#6036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6037 = PCURVE('',#5562,#6038);+#6038 = DEFINITIONAL_REPRESENTATION('',(#6039),#6043);+#6039 = LINE('',#6040,#6041);+#6040 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#6041 = VECTOR('',#6042,1.);+#6042 = DIRECTION('',(-1.,0.));+#6043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6044 = ORIENTED_EDGE('',*,*,#6045,.T.);+#6045 = EDGE_CURVE('',#6023,#5965,#6046,.T.);+#6046 = SURFACE_CURVE('',#6047,(#6051,#6058),.PCURVE_S1.);+#6047 = LINE('',#6048,#6049);+#6048 = CARTESIAN_POINT('',(-0.75,-3.2,0.713992189406));+#6049 = VECTOR('',#6050,1.);+#6050 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6051 = PCURVE('',#5533,#6052);+#6052 = DEFINITIONAL_REPRESENTATION('',(#6053),#6057);+#6053 = LINE('',#6054,#6055);+#6054 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#6055 = VECTOR('',#6056,1.);+#6056 = DIRECTION('',(0.,-1.));+#6057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6058 = PCURVE('',#5985,#6059);+#6059 = DEFINITIONAL_REPRESENTATION('',(#6060),#6064);+#6060 = LINE('',#6061,#6062);+#6061 = CARTESIAN_POINT('',(2.831748013849,0.));+#6062 = VECTOR('',#6063,1.);+#6063 = DIRECTION('',(-0.,1.));+#6064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6065 = ORIENTED_EDGE('',*,*,#5997,.F.);+#6066 = ADVANCED_FACE('',(#6067),#5562,.F.);+#6067 = FACE_BOUND('',#6068,.F.);+#6068 = EDGE_LOOP('',(#6069,#6070,#6071,#6095,#6118,#6142,#6165,#6188,+ #6211,#6235,#6258,#6282,#6305,#6331));+#6069 = ORIENTED_EDGE('',*,*,#5545,.F.);+#6070 = ORIENTED_EDGE('',*,*,#5608,.T.);+#6071 = ORIENTED_EDGE('',*,*,#6072,.T.);+#6072 = EDGE_CURVE('',#5609,#6073,#6075,.T.);+#6073 = VERTEX_POINT('',#6074);+#6074 = CARTESIAN_POINT('',(-0.84,-3.653021649751,0.704234328342));+#6075 = SURFACE_CURVE('',#6076,(#6081,#6088),.PCURVE_S1.);+#6076 = CIRCLE('',#6077,0.147);+#6077 = AXIS2_PLACEMENT_3D('',#6078,#6079,#6080);+#6078 = CARTESIAN_POINT('',(-0.84,-3.52308092439,0.6355));+#6079 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#6080 = DIRECTION('',(0.,0.,1.));+#6081 = PCURVE('',#5562,#6082);+#6082 = DEFINITIONAL_REPRESENTATION('',(#6083),#6087);+#6083 = CIRCLE('',#6084,0.147);+#6084 = AXIS2_PLACEMENT_2D('',#6085,#6086);+#6085 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#6086 = DIRECTION('',(1.,0.));+#6087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6088 = PCURVE('',#5647,#6089);+#6089 = DEFINITIONAL_REPRESENTATION('',(#6090),#6094);+#6090 = LINE('',#6091,#6092);+#6091 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#6092 = VECTOR('',#6093,1.);+#6093 = DIRECTION('',(1.,0.));+#6094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6095 = ORIENTED_EDGE('',*,*,#6096,.T.);+#6096 = EDGE_CURVE('',#6073,#6097,#6099,.T.);+#6097 = VERTEX_POINT('',#6098);+#6098 = CARTESIAN_POINT('',(-0.84,-3.958168154079,0.127361620474));+#6099 = SURFACE_CURVE('',#6100,(#6104,#6111),.PCURVE_S1.);+#6100 = LINE('',#6101,#6102);+#6101 = CARTESIAN_POINT('',(-0.84,-3.626407401915,0.754547974408));+#6102 = VECTOR('',#6103,1.);+#6103 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#6104 = PCURVE('',#5562,#6105);+#6105 = DEFINITIONAL_REPRESENTATION('',(#6106),#6110);+#6106 = LINE('',#6107,#6108);+#6107 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#6108 = VECTOR('',#6109,1.);+#6109 = DIRECTION('',(-0.883950512662,0.467580464908));+#6110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6111 = PCURVE('',#5725,#6112);+#6112 = DEFINITIONAL_REPRESENTATION('',(#6113),#6117);+#6113 = LINE('',#6114,#6115);+#6114 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#6115 = VECTOR('',#6116,1.);+#6116 = DIRECTION('',(1.,-2.399596746007E-32));+#6117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6118 = ORIENTED_EDGE('',*,*,#6119,.F.);+#6119 = EDGE_CURVE('',#6120,#6097,#6122,.T.);+#6120 = VERTEX_POINT('',#6121);+#6121 = CARTESIAN_POINT('',(-0.84,-3.99529407561,0.105));+#6122 = SURFACE_CURVE('',#6123,(#6128,#6135),.PCURVE_S1.);+#6123 = CIRCLE('',#6124,4.2E-02);+#6124 = AXIS2_PLACEMENT_3D('',#6125,#6126,#6127);+#6125 = CARTESIAN_POINT('',(-0.84,-3.99529407561,0.147));+#6126 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#6127 = DIRECTION('',(0.,0.,1.));+#6128 = PCURVE('',#5562,#6129);+#6129 = DEFINITIONAL_REPRESENTATION('',(#6130),#6134);+#6130 = CIRCLE('',#6131,4.2E-02);+#6131 = AXIS2_PLACEMENT_2D('',#6132,#6133);+#6132 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#6133 = DIRECTION('',(1.,0.));+#6134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6135 = PCURVE('',#5754,#6136);+#6136 = DEFINITIONAL_REPRESENTATION('',(#6137),#6141);+#6137 = LINE('',#6138,#6139);+#6138 = CARTESIAN_POINT('',(0.,-9.E-02));+#6139 = VECTOR('',#6140,1.);+#6140 = DIRECTION('',(1.,0.));+#6141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6142 = ORIENTED_EDGE('',*,*,#6143,.T.);+#6143 = EDGE_CURVE('',#6120,#6144,#6146,.T.);+#6144 = VERTEX_POINT('',#6145);+#6145 = CARTESIAN_POINT('',(-0.84,-4.43,0.105));+#6146 = SURFACE_CURVE('',#6147,(#6151,#6158),.PCURVE_S1.);+#6147 = LINE('',#6148,#6149);+#6148 = CARTESIAN_POINT('',(-0.84,-3.938375,0.105));+#6149 = VECTOR('',#6150,1.);+#6150 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6151 = PCURVE('',#5562,#6152);+#6152 = DEFINITIONAL_REPRESENTATION('',(#6153),#6157);+#6153 = LINE('',#6154,#6155);+#6154 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#6155 = VECTOR('',#6156,1.);+#6156 = DIRECTION('',(0.,1.));+#6157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6158 = PCURVE('',#5782,#6159);+#6159 = DEFINITIONAL_REPRESENTATION('',(#6160),#6164);+#6160 = LINE('',#6161,#6162);+#6161 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#6162 = VECTOR('',#6163,1.);+#6163 = DIRECTION('',(1.,0.));+#6164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6165 = ORIENTED_EDGE('',*,*,#6166,.T.);+#6166 = EDGE_CURVE('',#6144,#6167,#6169,.T.);+#6167 = VERTEX_POINT('',#6168);+#6168 = CARTESIAN_POINT('',(-0.84,-4.43,0.));+#6169 = SURFACE_CURVE('',#6170,(#6174,#6181),.PCURVE_S1.);+#6170 = LINE('',#6171,#6172);+#6171 = CARTESIAN_POINT('',(-0.84,-4.43,-8.142959240193E-02));+#6172 = VECTOR('',#6173,1.);+#6173 = DIRECTION('',(0.,0.,-1.));+#6174 = PCURVE('',#5562,#6175);+#6175 = DEFINITIONAL_REPRESENTATION('',(#6176),#6180);+#6176 = LINE('',#6177,#6178);+#6177 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#6178 = VECTOR('',#6179,1.);+#6179 = DIRECTION('',(-1.,0.));+#6180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6181 = PCURVE('',#5810,#6182);+#6182 = DEFINITIONAL_REPRESENTATION('',(#6183),#6187);+#6183 = LINE('',#6184,#6185);+#6184 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#6185 = VECTOR('',#6186,1.);+#6186 = DIRECTION('',(-1.,-0.));+#6187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6188 = ORIENTED_EDGE('',*,*,#6189,.F.);+#6189 = EDGE_CURVE('',#6190,#6167,#6192,.T.);+#6190 = VERTEX_POINT('',#6191);+#6191 = CARTESIAN_POINT('',(-0.84,-3.99529407561,0.));+#6192 = SURFACE_CURVE('',#6193,(#6197,#6204),.PCURVE_S1.);+#6193 = LINE('',#6194,#6195);+#6194 = CARTESIAN_POINT('',(-0.84,-3.938375,0.));+#6195 = VECTOR('',#6196,1.);+#6196 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6197 = PCURVE('',#5562,#6198);+#6198 = DEFINITIONAL_REPRESENTATION('',(#6199),#6203);+#6199 = LINE('',#6200,#6201);+#6200 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#6201 = VECTOR('',#6202,1.);+#6202 = DIRECTION('',(0.,1.));+#6203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6204 = PCURVE('',#5838,#6205);+#6205 = DEFINITIONAL_REPRESENTATION('',(#6206),#6210);+#6206 = LINE('',#6207,#6208);+#6207 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#6208 = VECTOR('',#6209,1.);+#6209 = DIRECTION('',(1.,0.));+#6210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6211 = ORIENTED_EDGE('',*,*,#6212,.T.);+#6212 = EDGE_CURVE('',#6190,#6213,#6215,.T.);+#6213 = VERTEX_POINT('',#6214);+#6214 = CARTESIAN_POINT('',(-0.84,-3.865353350249,7.826567165848E-02));+#6215 = SURFACE_CURVE('',#6216,(#6221,#6228),.PCURVE_S1.);+#6216 = CIRCLE('',#6217,0.147);+#6217 = AXIS2_PLACEMENT_3D('',#6218,#6219,#6220);+#6218 = CARTESIAN_POINT('',(-0.84,-3.99529407561,0.147));+#6219 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#6220 = DIRECTION('',(0.,0.,1.));+#6221 = PCURVE('',#5562,#6222);+#6222 = DEFINITIONAL_REPRESENTATION('',(#6223),#6227);+#6223 = CIRCLE('',#6224,0.147);+#6224 = AXIS2_PLACEMENT_2D('',#6225,#6226);+#6225 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#6226 = DIRECTION('',(1.,0.));+#6227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6228 = PCURVE('',#5867,#6229);+#6229 = DEFINITIONAL_REPRESENTATION('',(#6230),#6234);+#6230 = LINE('',#6231,#6232);+#6231 = CARTESIAN_POINT('',(0.,-9.E-02));+#6232 = VECTOR('',#6233,1.);+#6233 = DIRECTION('',(1.,0.));+#6234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6235 = ORIENTED_EDGE('',*,*,#6236,.F.);+#6236 = EDGE_CURVE('',#6237,#6213,#6239,.T.);+#6237 = VERTEX_POINT('',#6238);+#6238 = CARTESIAN_POINT('',(-0.84,-3.560206845921,0.655138379526));+#6239 = SURFACE_CURVE('',#6240,(#6244,#6251),.PCURVE_S1.);+#6240 = LINE('',#6241,#6242);+#6241 = CARTESIAN_POINT('',(-0.84,-3.533592598085,0.705452025592));+#6242 = VECTOR('',#6243,1.);+#6243 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#6244 = PCURVE('',#5562,#6245);+#6245 = DEFINITIONAL_REPRESENTATION('',(#6246),#6250);+#6246 = LINE('',#6247,#6248);+#6247 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#6248 = VECTOR('',#6249,1.);+#6249 = DIRECTION('',(-0.883950512662,0.467580464908));+#6250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6251 = PCURVE('',#5895,#6252);+#6252 = DEFINITIONAL_REPRESENTATION('',(#6253),#6257);+#6253 = LINE('',#6254,#6255);+#6254 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#6255 = VECTOR('',#6256,1.);+#6256 = DIRECTION('',(1.,-2.399596746007E-32));+#6257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6258 = ORIENTED_EDGE('',*,*,#6259,.F.);+#6259 = EDGE_CURVE('',#6260,#6237,#6262,.T.);+#6260 = VERTEX_POINT('',#6261);+#6261 = CARTESIAN_POINT('',(-0.84,-3.52308092439,0.6775));+#6262 = SURFACE_CURVE('',#6263,(#6268,#6275),.PCURVE_S1.);+#6263 = CIRCLE('',#6264,4.2E-02);+#6264 = AXIS2_PLACEMENT_3D('',#6265,#6266,#6267);+#6265 = CARTESIAN_POINT('',(-0.84,-3.52308092439,0.6355));+#6266 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#6267 = DIRECTION('',(0.,0.,1.));+#6268 = PCURVE('',#5562,#6269);+#6269 = DEFINITIONAL_REPRESENTATION('',(#6270),#6274);+#6270 = CIRCLE('',#6271,4.2E-02);+#6271 = AXIS2_PLACEMENT_2D('',#6272,#6273);+#6272 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#6273 = DIRECTION('',(1.,0.));+#6274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6275 = PCURVE('',#5924,#6276);+#6276 = DEFINITIONAL_REPRESENTATION('',(#6277),#6281);+#6277 = LINE('',#6278,#6279);+#6278 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#6279 = VECTOR('',#6280,1.);+#6280 = DIRECTION('',(1.,0.));+#6281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6282 = ORIENTED_EDGE('',*,*,#6283,.F.);+#6283 = EDGE_CURVE('',#6284,#6260,#6286,.T.);+#6284 = VERTEX_POINT('',#6285);+#6285 = CARTESIAN_POINT('',(-0.84,-3.25,0.6775));+#6286 = SURFACE_CURVE('',#6287,(#6291,#6298),.PCURVE_S1.);+#6287 = LINE('',#6288,#6289);+#6288 = CARTESIAN_POINT('',(-0.84,-3.25,0.6775));+#6289 = VECTOR('',#6290,1.);+#6290 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6291 = PCURVE('',#5562,#6292);+#6292 = DEFINITIONAL_REPRESENTATION('',(#6293),#6297);+#6293 = LINE('',#6294,#6295);+#6294 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#6295 = VECTOR('',#6296,1.);+#6296 = DIRECTION('',(0.,1.));+#6297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6298 = PCURVE('',#5952,#6299);+#6299 = DEFINITIONAL_REPRESENTATION('',(#6300),#6304);+#6300 = LINE('',#6301,#6302);+#6301 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#6302 = VECTOR('',#6303,1.);+#6303 = DIRECTION('',(1.,0.));+#6304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6305 = ORIENTED_EDGE('',*,*,#6306,.F.);+#6306 = EDGE_CURVE('',#6023,#6284,#6307,.T.);+#6307 = SURFACE_CURVE('',#6308,(#6313,#6324),.PCURVE_S1.);+#6308 = CIRCLE('',#6309,5.25E-02);+#6309 = AXIS2_PLACEMENT_3D('',#6310,#6311,#6312);+#6310 = CARTESIAN_POINT('',(-0.84,-3.25,0.73));+#6311 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6312 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6313 = PCURVE('',#5562,#6314);+#6314 = DEFINITIONAL_REPRESENTATION('',(#6315),#6323);+#6315 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6316,#6317,#6318,#6319,+#6320,#6321,#6322),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#6316 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#6317 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#6318 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#6319 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#6320 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#6321 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#6322 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#6323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6324 = PCURVE('',#5985,#6325);+#6325 = DEFINITIONAL_REPRESENTATION('',(#6326),#6330);+#6326 = LINE('',#6327,#6328);+#6327 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#6328 = VECTOR('',#6329,1.);+#6329 = DIRECTION('',(-1.,0.));+#6330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6331 = ORIENTED_EDGE('',*,*,#6022,.F.);+#6332 = ADVANCED_FACE('',(#6333),#5647,.T.);+#6333 = FACE_BOUND('',#6334,.T.);+#6334 = EDGE_LOOP('',(#6335,#6336,#6337,#6358));+#6335 = ORIENTED_EDGE('',*,*,#5631,.F.);+#6336 = ORIENTED_EDGE('',*,*,#6072,.T.);+#6337 = ORIENTED_EDGE('',*,*,#6338,.T.);+#6338 = EDGE_CURVE('',#6073,#5686,#6339,.T.);+#6339 = SURFACE_CURVE('',#6340,(#6344,#6351),.PCURVE_S1.);+#6340 = LINE('',#6341,#6342);+#6341 = CARTESIAN_POINT('',(-0.84,-3.653021649751,0.704234328342));+#6342 = VECTOR('',#6343,1.);+#6343 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6344 = PCURVE('',#5647,#6345);+#6345 = DEFINITIONAL_REPRESENTATION('',(#6346),#6350);+#6346 = LINE('',#6347,#6348);+#6347 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#6348 = VECTOR('',#6349,1.);+#6349 = DIRECTION('',(-0.,1.));+#6350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6351 = PCURVE('',#5725,#6352);+#6352 = DEFINITIONAL_REPRESENTATION('',(#6353),#6357);+#6353 = LINE('',#6354,#6355);+#6354 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#6355 = VECTOR('',#6356,1.);+#6356 = DIRECTION('',(4.767113258106E-29,1.));+#6357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6358 = ORIENTED_EDGE('',*,*,#5685,.F.);+#6359 = ADVANCED_FACE('',(#6360),#5985,.T.);+#6360 = FACE_BOUND('',#6361,.T.);+#6361 = EDGE_LOOP('',(#6362,#6363,#6384,#6385));+#6362 = ORIENTED_EDGE('',*,*,#5964,.T.);+#6363 = ORIENTED_EDGE('',*,*,#6364,.T.);+#6364 = EDGE_CURVE('',#5937,#6284,#6365,.T.);+#6365 = SURFACE_CURVE('',#6366,(#6370,#6377),.PCURVE_S1.);+#6366 = LINE('',#6367,#6368);+#6367 = CARTESIAN_POINT('',(-0.66,-3.25,0.6775));+#6368 = VECTOR('',#6369,1.);+#6369 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6370 = PCURVE('',#5985,#6371);+#6371 = DEFINITIONAL_REPRESENTATION('',(#6372),#6376);+#6372 = LINE('',#6373,#6374);+#6373 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#6374 = VECTOR('',#6375,1.);+#6375 = DIRECTION('',(-0.,-1.));+#6376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6377 = PCURVE('',#5952,#6378);+#6378 = DEFINITIONAL_REPRESENTATION('',(#6379),#6383);+#6379 = LINE('',#6380,#6381);+#6380 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#6381 = VECTOR('',#6382,1.);+#6382 = DIRECTION('',(0.,-1.));+#6383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6384 = ORIENTED_EDGE('',*,*,#6306,.F.);+#6385 = ORIENTED_EDGE('',*,*,#6045,.T.);+#6386 = ADVANCED_FACE('',(#6387),#5952,.F.);+#6387 = FACE_BOUND('',#6388,.F.);+#6388 = EDGE_LOOP('',(#6389,#6390,#6411,#6412));+#6389 = ORIENTED_EDGE('',*,*,#6283,.T.);+#6390 = ORIENTED_EDGE('',*,*,#6391,.F.);+#6391 = EDGE_CURVE('',#5908,#6260,#6392,.T.);+#6392 = SURFACE_CURVE('',#6393,(#6397,#6404),.PCURVE_S1.);+#6393 = LINE('',#6394,#6395);+#6394 = CARTESIAN_POINT('',(-0.66,-3.52308092439,0.6775));+#6395 = VECTOR('',#6396,1.);+#6396 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6397 = PCURVE('',#5952,#6398);+#6398 = DEFINITIONAL_REPRESENTATION('',(#6399),#6403);+#6399 = LINE('',#6400,#6401);+#6400 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#6401 = VECTOR('',#6402,1.);+#6402 = DIRECTION('',(0.,-1.));+#6403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6404 = PCURVE('',#5924,#6405);+#6405 = DEFINITIONAL_REPRESENTATION('',(#6406),#6410);+#6406 = LINE('',#6407,#6408);+#6407 = CARTESIAN_POINT('',(0.,9.E-02));+#6408 = VECTOR('',#6409,1.);+#6409 = DIRECTION('',(0.,-1.));+#6410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6411 = ORIENTED_EDGE('',*,*,#5936,.F.);+#6412 = ORIENTED_EDGE('',*,*,#6364,.T.);+#6413 = ADVANCED_FACE('',(#6414),#5924,.F.);+#6414 = FACE_BOUND('',#6415,.F.);+#6415 = EDGE_LOOP('',(#6416,#6417,#6438,#6439));+#6416 = ORIENTED_EDGE('',*,*,#6259,.T.);+#6417 = ORIENTED_EDGE('',*,*,#6418,.F.);+#6418 = EDGE_CURVE('',#5880,#6237,#6419,.T.);+#6419 = SURFACE_CURVE('',#6420,(#6424,#6431),.PCURVE_S1.);+#6420 = LINE('',#6421,#6422);+#6421 = CARTESIAN_POINT('',(-0.66,-3.560206845921,0.655138379526));+#6422 = VECTOR('',#6423,1.);+#6423 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6424 = PCURVE('',#5924,#6425);+#6425 = DEFINITIONAL_REPRESENTATION('',(#6426),#6430);+#6426 = LINE('',#6427,#6428);+#6427 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#6428 = VECTOR('',#6429,1.);+#6429 = DIRECTION('',(0.,-1.));+#6430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6431 = PCURVE('',#5895,#6432);+#6432 = DEFINITIONAL_REPRESENTATION('',(#6433),#6437);+#6433 = LINE('',#6434,#6435);+#6434 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#6435 = VECTOR('',#6436,1.);+#6436 = DIRECTION('',(-4.767113258106E-29,-1.));+#6437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6438 = ORIENTED_EDGE('',*,*,#5907,.F.);+#6439 = ORIENTED_EDGE('',*,*,#6391,.T.);+#6440 = ADVANCED_FACE('',(#6441),#5895,.F.);+#6441 = FACE_BOUND('',#6442,.F.);+#6442 = EDGE_LOOP('',(#6443,#6444,#6465,#6466));+#6443 = ORIENTED_EDGE('',*,*,#6236,.T.);+#6444 = ORIENTED_EDGE('',*,*,#6445,.F.);+#6445 = EDGE_CURVE('',#5851,#6213,#6446,.T.);+#6446 = SURFACE_CURVE('',#6447,(#6451,#6458),.PCURVE_S1.);+#6447 = LINE('',#6448,#6449);+#6448 = CARTESIAN_POINT('',(-0.66,-3.865353350249,7.826567165848E-02));+#6449 = VECTOR('',#6450,1.);+#6450 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6451 = PCURVE('',#5895,#6452);+#6452 = DEFINITIONAL_REPRESENTATION('',(#6453),#6457);+#6453 = LINE('',#6454,#6455);+#6454 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#6455 = VECTOR('',#6456,1.);+#6456 = DIRECTION('',(-4.767113258106E-29,-1.));+#6457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6458 = PCURVE('',#5867,#6459);+#6459 = DEFINITIONAL_REPRESENTATION('',(#6460),#6464);+#6460 = LINE('',#6461,#6462);+#6461 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#6462 = VECTOR('',#6463,1.);+#6463 = DIRECTION('',(0.,-1.));+#6464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6465 = ORIENTED_EDGE('',*,*,#5879,.F.);+#6466 = ORIENTED_EDGE('',*,*,#6418,.T.);+#6467 = ADVANCED_FACE('',(#6468),#5867,.T.);+#6468 = FACE_BOUND('',#6469,.T.);+#6469 = EDGE_LOOP('',(#6470,#6471,#6472,#6473));+#6470 = ORIENTED_EDGE('',*,*,#6212,.T.);+#6471 = ORIENTED_EDGE('',*,*,#6445,.F.);+#6472 = ORIENTED_EDGE('',*,*,#5850,.F.);+#6473 = ORIENTED_EDGE('',*,*,#6474,.T.);+#6474 = EDGE_CURVE('',#5823,#6190,#6475,.T.);+#6475 = SURFACE_CURVE('',#6476,(#6480,#6487),.PCURVE_S1.);+#6476 = LINE('',#6477,#6478);+#6477 = CARTESIAN_POINT('',(-0.66,-3.99529407561,0.));+#6478 = VECTOR('',#6479,1.);+#6479 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6480 = PCURVE('',#5867,#6481);+#6481 = DEFINITIONAL_REPRESENTATION('',(#6482),#6486);+#6482 = LINE('',#6483,#6484);+#6483 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#6484 = VECTOR('',#6485,1.);+#6485 = DIRECTION('',(0.,-1.));+#6486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6487 = PCURVE('',#5838,#6488);+#6488 = DEFINITIONAL_REPRESENTATION('',(#6489),#6493);+#6489 = LINE('',#6490,#6491);+#6490 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#6491 = VECTOR('',#6492,1.);+#6492 = DIRECTION('',(0.,-1.));+#6493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6494 = ADVANCED_FACE('',(#6495),#5838,.F.);+#6495 = FACE_BOUND('',#6496,.F.);+#6496 = EDGE_LOOP('',(#6497,#6498,#6499,#6520));+#6497 = ORIENTED_EDGE('',*,*,#6474,.T.);+#6498 = ORIENTED_EDGE('',*,*,#6189,.T.);+#6499 = ORIENTED_EDGE('',*,*,#6500,.T.);+#6500 = EDGE_CURVE('',#6167,#5795,#6501,.T.);+#6501 = SURFACE_CURVE('',#6502,(#6506,#6513),.PCURVE_S1.);+#6502 = LINE('',#6503,#6504);+#6503 = CARTESIAN_POINT('',(-1.045,-4.43,0.));+#6504 = VECTOR('',#6505,1.);+#6505 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6506 = PCURVE('',#5838,#6507);+#6507 = DEFINITIONAL_REPRESENTATION('',(#6508),#6512);+#6508 = LINE('',#6509,#6510);+#6509 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#6510 = VECTOR('',#6511,1.);+#6511 = DIRECTION('',(0.,1.));+#6512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6513 = PCURVE('',#5810,#6514);+#6514 = DEFINITIONAL_REPRESENTATION('',(#6515),#6519);+#6515 = LINE('',#6516,#6517);+#6516 = CARTESIAN_POINT('',(0.5,-0.295));+#6517 = VECTOR('',#6518,1.);+#6518 = DIRECTION('',(0.,-1.));+#6519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6520 = ORIENTED_EDGE('',*,*,#5822,.F.);+#6521 = ADVANCED_FACE('',(#6522),#5810,.T.);+#6522 = FACE_BOUND('',#6523,.T.);+#6523 = EDGE_LOOP('',(#6524,#6525,#6546,#6547));+#6524 = ORIENTED_EDGE('',*,*,#5794,.F.);+#6525 = ORIENTED_EDGE('',*,*,#6526,.F.);+#6526 = EDGE_CURVE('',#6144,#5767,#6527,.T.);+#6527 = SURFACE_CURVE('',#6528,(#6532,#6539),.PCURVE_S1.);+#6528 = LINE('',#6529,#6530);+#6529 = CARTESIAN_POINT('',(-1.045,-4.43,0.105));+#6530 = VECTOR('',#6531,1.);+#6531 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6532 = PCURVE('',#5810,#6533);+#6533 = DEFINITIONAL_REPRESENTATION('',(#6534),#6538);+#6534 = LINE('',#6535,#6536);+#6535 = CARTESIAN_POINT('',(0.605,-0.295));+#6536 = VECTOR('',#6537,1.);+#6537 = DIRECTION('',(0.,-1.));+#6538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6539 = PCURVE('',#5782,#6540);+#6540 = DEFINITIONAL_REPRESENTATION('',(#6541),#6545);+#6541 = LINE('',#6542,#6543);+#6542 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#6543 = VECTOR('',#6544,1.);+#6544 = DIRECTION('',(0.,1.));+#6545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6546 = ORIENTED_EDGE('',*,*,#6166,.T.);+#6547 = ORIENTED_EDGE('',*,*,#6500,.T.);+#6548 = ADVANCED_FACE('',(#6549),#5782,.T.);+#6549 = FACE_BOUND('',#6550,.T.);+#6550 = EDGE_LOOP('',(#6551,#6572,#6573,#6574));+#6551 = ORIENTED_EDGE('',*,*,#6552,.T.);+#6552 = EDGE_CURVE('',#5738,#6120,#6553,.T.);+#6553 = SURFACE_CURVE('',#6554,(#6558,#6565),.PCURVE_S1.);+#6554 = LINE('',#6555,#6556);+#6555 = CARTESIAN_POINT('',(-0.66,-3.99529407561,0.105));+#6556 = VECTOR('',#6557,1.);+#6557 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6558 = PCURVE('',#5782,#6559);+#6559 = DEFINITIONAL_REPRESENTATION('',(#6560),#6564);+#6560 = LINE('',#6561,#6562);+#6561 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#6562 = VECTOR('',#6563,1.);+#6563 = DIRECTION('',(0.,-1.));+#6564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6565 = PCURVE('',#5754,#6566);+#6566 = DEFINITIONAL_REPRESENTATION('',(#6567),#6571);+#6567 = LINE('',#6568,#6569);+#6568 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#6569 = VECTOR('',#6570,1.);+#6570 = DIRECTION('',(0.,-1.));+#6571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6572 = ORIENTED_EDGE('',*,*,#6143,.T.);+#6573 = ORIENTED_EDGE('',*,*,#6526,.T.);+#6574 = ORIENTED_EDGE('',*,*,#5766,.F.);+#6575 = ADVANCED_FACE('',(#6576),#5754,.F.);+#6576 = FACE_BOUND('',#6577,.F.);+#6577 = EDGE_LOOP('',(#6578,#6579,#6600,#6601));+#6578 = ORIENTED_EDGE('',*,*,#6119,.T.);+#6579 = ORIENTED_EDGE('',*,*,#6580,.F.);+#6580 = EDGE_CURVE('',#5710,#6097,#6581,.T.);+#6581 = SURFACE_CURVE('',#6582,(#6586,#6593),.PCURVE_S1.);+#6582 = LINE('',#6583,#6584);+#6583 = CARTESIAN_POINT('',(-0.66,-3.958168154079,0.127361620474));+#6584 = VECTOR('',#6585,1.);+#6585 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6586 = PCURVE('',#5754,#6587);+#6587 = DEFINITIONAL_REPRESENTATION('',(#6588),#6592);+#6588 = LINE('',#6589,#6590);+#6589 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#6590 = VECTOR('',#6591,1.);+#6591 = DIRECTION('',(0.,-1.));+#6592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6593 = PCURVE('',#5725,#6594);+#6594 = DEFINITIONAL_REPRESENTATION('',(#6595),#6599);+#6595 = LINE('',#6596,#6597);+#6596 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#6597 = VECTOR('',#6598,1.);+#6598 = DIRECTION('',(-4.767113258106E-29,-1.));+#6599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6600 = ORIENTED_EDGE('',*,*,#5737,.F.);+#6601 = ORIENTED_EDGE('',*,*,#6552,.T.);+#6602 = ADVANCED_FACE('',(#6603),#5725,.T.);+#6603 = FACE_BOUND('',#6604,.T.);+#6604 = EDGE_LOOP('',(#6605,#6606,#6607,#6608));+#6605 = ORIENTED_EDGE('',*,*,#6338,.F.);+#6606 = ORIENTED_EDGE('',*,*,#6096,.T.);+#6607 = ORIENTED_EDGE('',*,*,#6580,.F.);+#6608 = ORIENTED_EDGE('',*,*,#5709,.F.);+#6609 = MANIFOLD_SOLID_BREP('',#6610);+#6610 = CLOSED_SHELL('',(#6611,#6741,#6817,#7155,#7204,#7470,#7497,#7524+ ,#7551,#7578,#7605,#7632,#7659,#7686,#7713,#7740));+#6611 = ADVANCED_FACE('',(#6612),#6627,.T.);+#6612 = FACE_BOUND('',#6613,.T.);+#6613 = EDGE_LOOP('',(#6614,#6654,#6682,#6715));+#6614 = ORIENTED_EDGE('',*,*,#6615,.T.);+#6615 = EDGE_CURVE('',#6616,#6618,#6620,.T.);+#6616 = VERTEX_POINT('',#6617);+#6617 = CARTESIAN_POINT('',(-0.16,-3.25,0.7825));+#6618 = VERTEX_POINT('',#6619);+#6619 = CARTESIAN_POINT('',(-0.16,-3.2,0.746007810594));+#6620 = SURFACE_CURVE('',#6621,(#6626,#6638),.PCURVE_S1.);+#6621 = CIRCLE('',#6622,5.25E-02);+#6622 = AXIS2_PLACEMENT_3D('',#6623,#6624,#6625);+#6623 = CARTESIAN_POINT('',(-0.16,-3.25,0.73));+#6624 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6625 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6626 = PCURVE('',#6627,#6632);+#6627 = CYLINDRICAL_SURFACE('',#6628,5.25E-02);+#6628 = AXIS2_PLACEMENT_3D('',#6629,#6630,#6631);+#6629 = CARTESIAN_POINT('',(-0.25,-3.25,0.73));+#6630 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6631 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6632 = DEFINITIONAL_REPRESENTATION('',(#6633),#6637);+#6633 = LINE('',#6634,#6635);+#6634 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#6635 = VECTOR('',#6636,1.);+#6636 = DIRECTION('',(-1.,-0.));+#6637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6638 = PCURVE('',#6639,#6644);+#6639 = PLANE('',#6640);+#6640 = AXIS2_PLACEMENT_3D('',#6641,#6642,#6643);+#6641 = CARTESIAN_POINT('',(-0.16,-3.861815252728,0.337140815196));+#6642 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6643 = DIRECTION('',(0.,0.,1.));+#6644 = DEFINITIONAL_REPRESENTATION('',(#6645),#6653);+#6645 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6646,#6647,#6648,#6649,+#6650,#6651,#6652),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#6646 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#6647 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#6648 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#6649 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#6650 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#6651 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#6652 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#6653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6654 = ORIENTED_EDGE('',*,*,#6655,.F.);+#6655 = EDGE_CURVE('',#6656,#6618,#6658,.T.);+#6656 = VERTEX_POINT('',#6657);+#6657 = CARTESIAN_POINT('',(-0.34,-3.2,0.746007810594));+#6658 = SURFACE_CURVE('',#6659,(#6663,#6670),.PCURVE_S1.);+#6659 = LINE('',#6660,#6661);+#6660 = CARTESIAN_POINT('',(-0.25,-3.2,0.746007810594));+#6661 = VECTOR('',#6662,1.);+#6662 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6663 = PCURVE('',#6627,#6664);+#6664 = DEFINITIONAL_REPRESENTATION('',(#6665),#6669);+#6665 = LINE('',#6666,#6667);+#6666 = CARTESIAN_POINT('',(3.451437293332,0.));+#6667 = VECTOR('',#6668,1.);+#6668 = DIRECTION('',(-0.,1.));+#6669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6670 = PCURVE('',#6671,#6676);+#6671 = PLANE('',#6672);+#6672 = AXIS2_PLACEMENT_3D('',#6673,#6674,#6675);+#6673 = CARTESIAN_POINT('',(-0.84,-3.2,-0.5));+#6674 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6675 = DIRECTION('',(0.,0.,1.));+#6676 = DEFINITIONAL_REPRESENTATION('',(#6677),#6681);+#6677 = LINE('',#6678,#6679);+#6678 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#6679 = VECTOR('',#6680,1.);+#6680 = DIRECTION('',(0.,-1.));+#6681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6682 = ORIENTED_EDGE('',*,*,#6683,.F.);+#6683 = EDGE_CURVE('',#6684,#6656,#6686,.T.);+#6684 = VERTEX_POINT('',#6685);+#6685 = CARTESIAN_POINT('',(-0.34,-3.25,0.7825));+#6686 = SURFACE_CURVE('',#6687,(#6692,#6699),.PCURVE_S1.);+#6687 = CIRCLE('',#6688,5.25E-02);+#6688 = AXIS2_PLACEMENT_3D('',#6689,#6690,#6691);+#6689 = CARTESIAN_POINT('',(-0.34,-3.25,0.73));+#6690 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#6691 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6692 = PCURVE('',#6627,#6693);+#6693 = DEFINITIONAL_REPRESENTATION('',(#6694),#6698);+#6694 = LINE('',#6695,#6696);+#6695 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#6696 = VECTOR('',#6697,1.);+#6697 = DIRECTION('',(-1.,0.));+#6698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6699 = PCURVE('',#6700,#6705);+#6700 = PLANE('',#6701);+#6701 = AXIS2_PLACEMENT_3D('',#6702,#6703,#6704);+#6702 = CARTESIAN_POINT('',(-0.34,-3.861815252728,0.337140815196));+#6703 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6704 = DIRECTION('',(0.,0.,1.));+#6705 = DEFINITIONAL_REPRESENTATION('',(#6706),#6714);+#6706 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6707,#6708,#6709,#6710,+#6711,#6712,#6713),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#6707 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#6708 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#6709 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#6710 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#6711 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#6712 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#6713 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#6714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6715 = ORIENTED_EDGE('',*,*,#6716,.T.);+#6716 = EDGE_CURVE('',#6684,#6616,#6717,.T.);+#6717 = SURFACE_CURVE('',#6718,(#6722,#6729),.PCURVE_S1.);+#6718 = LINE('',#6719,#6720);+#6719 = CARTESIAN_POINT('',(-0.34,-3.25,0.7825));+#6720 = VECTOR('',#6721,1.);+#6721 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6722 = PCURVE('',#6627,#6723);+#6723 = DEFINITIONAL_REPRESENTATION('',(#6724),#6728);+#6724 = LINE('',#6725,#6726);+#6725 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#6726 = VECTOR('',#6727,1.);+#6727 = DIRECTION('',(0.,1.));+#6728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6729 = PCURVE('',#6730,#6735);+#6730 = PLANE('',#6731);+#6731 = AXIS2_PLACEMENT_3D('',#6732,#6733,#6734);+#6732 = CARTESIAN_POINT('',(-0.25,-3.25,0.7825));+#6733 = DIRECTION('',(0.,0.,1.));+#6734 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6735 = DEFINITIONAL_REPRESENTATION('',(#6736),#6740);+#6736 = LINE('',#6737,#6738);+#6737 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#6738 = VECTOR('',#6739,1.);+#6739 = DIRECTION('',(0.,1.));+#6740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6741 = ADVANCED_FACE('',(#6742),#6730,.T.);+#6742 = FACE_BOUND('',#6743,.T.);+#6743 = EDGE_LOOP('',(#6744,#6745,#6768,#6796));+#6744 = ORIENTED_EDGE('',*,*,#6716,.F.);+#6745 = ORIENTED_EDGE('',*,*,#6746,.T.);+#6746 = EDGE_CURVE('',#6684,#6747,#6749,.T.);+#6747 = VERTEX_POINT('',#6748);+#6748 = CARTESIAN_POINT('',(-0.34,-3.52308092439,0.7825));+#6749 = SURFACE_CURVE('',#6750,(#6754,#6761),.PCURVE_S1.);+#6750 = LINE('',#6751,#6752);+#6751 = CARTESIAN_POINT('',(-0.34,-3.25,0.7825));+#6752 = VECTOR('',#6753,1.);+#6753 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6754 = PCURVE('',#6730,#6755);+#6755 = DEFINITIONAL_REPRESENTATION('',(#6756),#6760);+#6756 = LINE('',#6757,#6758);+#6757 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#6758 = VECTOR('',#6759,1.);+#6759 = DIRECTION('',(1.,0.));+#6760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6761 = PCURVE('',#6700,#6762);+#6762 = DEFINITIONAL_REPRESENTATION('',(#6763),#6767);+#6763 = LINE('',#6764,#6765);+#6764 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#6765 = VECTOR('',#6766,1.);+#6766 = DIRECTION('',(0.,1.));+#6767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6768 = ORIENTED_EDGE('',*,*,#6769,.T.);+#6769 = EDGE_CURVE('',#6747,#6770,#6772,.T.);+#6770 = VERTEX_POINT('',#6771);+#6771 = CARTESIAN_POINT('',(-0.16,-3.52308092439,0.7825));+#6772 = SURFACE_CURVE('',#6773,(#6777,#6784),.PCURVE_S1.);+#6773 = LINE('',#6774,#6775);+#6774 = CARTESIAN_POINT('',(-0.34,-3.52308092439,0.7825));+#6775 = VECTOR('',#6776,1.);+#6776 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6777 = PCURVE('',#6730,#6778);+#6778 = DEFINITIONAL_REPRESENTATION('',(#6779),#6783);+#6779 = LINE('',#6780,#6781);+#6780 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#6781 = VECTOR('',#6782,1.);+#6782 = DIRECTION('',(0.,1.));+#6783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6784 = PCURVE('',#6785,#6790);+#6785 = CYLINDRICAL_SURFACE('',#6786,0.147);+#6786 = AXIS2_PLACEMENT_3D('',#6787,#6788,#6789);+#6787 = CARTESIAN_POINT('',(-0.25,-3.52308092439,0.6355));+#6788 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6789 = DIRECTION('',(0.,0.,1.));+#6790 = DEFINITIONAL_REPRESENTATION('',(#6791),#6795);+#6791 = LINE('',#6792,#6793);+#6792 = CARTESIAN_POINT('',(0.,-9.E-02));+#6793 = VECTOR('',#6794,1.);+#6794 = DIRECTION('',(-0.,1.));+#6795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6796 = ORIENTED_EDGE('',*,*,#6797,.F.);+#6797 = EDGE_CURVE('',#6616,#6770,#6798,.T.);+#6798 = SURFACE_CURVE('',#6799,(#6803,#6810),.PCURVE_S1.);+#6799 = LINE('',#6800,#6801);+#6800 = CARTESIAN_POINT('',(-0.16,-3.25,0.7825));+#6801 = VECTOR('',#6802,1.);+#6802 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6803 = PCURVE('',#6730,#6804);+#6804 = DEFINITIONAL_REPRESENTATION('',(#6805),#6809);+#6805 = LINE('',#6806,#6807);+#6806 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#6807 = VECTOR('',#6808,1.);+#6808 = DIRECTION('',(1.,0.));+#6809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6810 = PCURVE('',#6639,#6811);+#6811 = DEFINITIONAL_REPRESENTATION('',(#6812),#6816);+#6812 = LINE('',#6813,#6814);+#6813 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#6814 = VECTOR('',#6815,1.);+#6815 = DIRECTION('',(0.,1.));+#6816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6817 = ADVANCED_FACE('',(#6818),#6639,.T.);+#6818 = FACE_BOUND('',#6819,.T.);+#6819 = EDGE_LOOP('',(#6820,#6821,#6822,#6846,#6874,#6903,#6931,#6959,+ #6987,#7016,#7044,#7073,#7101,#7134));+#6820 = ORIENTED_EDGE('',*,*,#6615,.F.);+#6821 = ORIENTED_EDGE('',*,*,#6797,.T.);+#6822 = ORIENTED_EDGE('',*,*,#6823,.T.);+#6823 = EDGE_CURVE('',#6770,#6824,#6826,.T.);+#6824 = VERTEX_POINT('',#6825);+#6825 = CARTESIAN_POINT('',(-0.16,-3.653021649751,0.704234328342));+#6826 = SURFACE_CURVE('',#6827,(#6832,#6839),.PCURVE_S1.);+#6827 = CIRCLE('',#6828,0.147);+#6828 = AXIS2_PLACEMENT_3D('',#6829,#6830,#6831);+#6829 = CARTESIAN_POINT('',(-0.16,-3.52308092439,0.6355));+#6830 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#6831 = DIRECTION('',(0.,0.,1.));+#6832 = PCURVE('',#6639,#6833);+#6833 = DEFINITIONAL_REPRESENTATION('',(#6834),#6838);+#6834 = CIRCLE('',#6835,0.147);+#6835 = AXIS2_PLACEMENT_2D('',#6836,#6837);+#6836 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#6837 = DIRECTION('',(1.,0.));+#6838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6839 = PCURVE('',#6785,#6840);+#6840 = DEFINITIONAL_REPRESENTATION('',(#6841),#6845);+#6841 = LINE('',#6842,#6843);+#6842 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#6843 = VECTOR('',#6844,1.);+#6844 = DIRECTION('',(1.,-0.));+#6845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6846 = ORIENTED_EDGE('',*,*,#6847,.T.);+#6847 = EDGE_CURVE('',#6824,#6848,#6850,.T.);+#6848 = VERTEX_POINT('',#6849);+#6849 = CARTESIAN_POINT('',(-0.16,-3.958168154079,0.127361620474));+#6850 = SURFACE_CURVE('',#6851,(#6855,#6862),.PCURVE_S1.);+#6851 = LINE('',#6852,#6853);+#6852 = CARTESIAN_POINT('',(-0.16,-3.626407401915,0.754547974408));+#6853 = VECTOR('',#6854,1.);+#6854 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#6855 = PCURVE('',#6639,#6856);+#6856 = DEFINITIONAL_REPRESENTATION('',(#6857),#6861);+#6857 = LINE('',#6858,#6859);+#6858 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#6859 = VECTOR('',#6860,1.);+#6860 = DIRECTION('',(-0.883950512662,0.467580464908));+#6861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6862 = PCURVE('',#6863,#6868);+#6863 = PLANE('',#6864);+#6864 = AXIS2_PLACEMENT_3D('',#6865,#6866,#6867);+#6865 = CARTESIAN_POINT('',(-0.25,-3.653021649751,0.704234328342));+#6866 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#6867 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#6868 = DEFINITIONAL_REPRESENTATION('',(#6869),#6873);+#6869 = LINE('',#6870,#6871);+#6870 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#6871 = VECTOR('',#6872,1.);+#6872 = DIRECTION('',(1.,-2.399596746007E-32));+#6873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6874 = ORIENTED_EDGE('',*,*,#6875,.F.);+#6875 = EDGE_CURVE('',#6876,#6848,#6878,.T.);+#6876 = VERTEX_POINT('',#6877);+#6877 = CARTESIAN_POINT('',(-0.16,-3.99529407561,0.105));+#6878 = SURFACE_CURVE('',#6879,(#6884,#6891),.PCURVE_S1.);+#6879 = CIRCLE('',#6880,4.2E-02);+#6880 = AXIS2_PLACEMENT_3D('',#6881,#6882,#6883);+#6881 = CARTESIAN_POINT('',(-0.16,-3.99529407561,0.147));+#6882 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#6883 = DIRECTION('',(0.,0.,1.));+#6884 = PCURVE('',#6639,#6885);+#6885 = DEFINITIONAL_REPRESENTATION('',(#6886),#6890);+#6886 = CIRCLE('',#6887,4.2E-02);+#6887 = AXIS2_PLACEMENT_2D('',#6888,#6889);+#6888 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#6889 = DIRECTION('',(1.,0.));+#6890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6891 = PCURVE('',#6892,#6897);+#6892 = CYLINDRICAL_SURFACE('',#6893,4.2E-02);+#6893 = AXIS2_PLACEMENT_3D('',#6894,#6895,#6896);+#6894 = CARTESIAN_POINT('',(-0.25,-3.99529407561,0.147));+#6895 = DIRECTION('',(1.,1.110223024625E-16,0.));+#6896 = DIRECTION('',(0.,0.,1.));+#6897 = DEFINITIONAL_REPRESENTATION('',(#6898),#6902);+#6898 = LINE('',#6899,#6900);+#6899 = CARTESIAN_POINT('',(-0.,9.E-02));+#6900 = VECTOR('',#6901,1.);+#6901 = DIRECTION('',(1.,-0.));+#6902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6903 = ORIENTED_EDGE('',*,*,#6904,.T.);+#6904 = EDGE_CURVE('',#6876,#6905,#6907,.T.);+#6905 = VERTEX_POINT('',#6906);+#6906 = CARTESIAN_POINT('',(-0.16,-4.43,0.105));+#6907 = SURFACE_CURVE('',#6908,(#6912,#6919),.PCURVE_S1.);+#6908 = LINE('',#6909,#6910);+#6909 = CARTESIAN_POINT('',(-0.16,-3.938375,0.105));+#6910 = VECTOR('',#6911,1.);+#6911 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6912 = PCURVE('',#6639,#6913);+#6913 = DEFINITIONAL_REPRESENTATION('',(#6914),#6918);+#6914 = LINE('',#6915,#6916);+#6915 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#6916 = VECTOR('',#6917,1.);+#6917 = DIRECTION('',(0.,1.));+#6918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6919 = PCURVE('',#6920,#6925);+#6920 = PLANE('',#6921);+#6921 = AXIS2_PLACEMENT_3D('',#6922,#6923,#6924);+#6922 = CARTESIAN_POINT('',(-0.25,-3.99529407561,0.105));+#6923 = DIRECTION('',(0.,0.,1.));+#6924 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6925 = DEFINITIONAL_REPRESENTATION('',(#6926),#6930);+#6926 = LINE('',#6927,#6928);+#6927 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#6928 = VECTOR('',#6929,1.);+#6929 = DIRECTION('',(1.,0.));+#6930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6931 = ORIENTED_EDGE('',*,*,#6932,.T.);+#6932 = EDGE_CURVE('',#6905,#6933,#6935,.T.);+#6933 = VERTEX_POINT('',#6934);+#6934 = CARTESIAN_POINT('',(-0.16,-4.43,0.));+#6935 = SURFACE_CURVE('',#6936,(#6940,#6947),.PCURVE_S1.);+#6936 = LINE('',#6937,#6938);+#6937 = CARTESIAN_POINT('',(-0.16,-4.43,-8.142959240193E-02));+#6938 = VECTOR('',#6939,1.);+#6939 = DIRECTION('',(0.,0.,-1.));+#6940 = PCURVE('',#6639,#6941);+#6941 = DEFINITIONAL_REPRESENTATION('',(#6942),#6946);+#6942 = LINE('',#6943,#6944);+#6943 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#6944 = VECTOR('',#6945,1.);+#6945 = DIRECTION('',(-1.,0.));+#6946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6947 = PCURVE('',#6948,#6953);+#6948 = PLANE('',#6949);+#6949 = AXIS2_PLACEMENT_3D('',#6950,#6951,#6952);+#6950 = CARTESIAN_POINT('',(-0.84,-4.43,-0.5));+#6951 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6952 = DIRECTION('',(0.,0.,1.));+#6953 = DEFINITIONAL_REPRESENTATION('',(#6954),#6958);+#6954 = LINE('',#6955,#6956);+#6955 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#6956 = VECTOR('',#6957,1.);+#6957 = DIRECTION('',(-1.,-0.));+#6958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6959 = ORIENTED_EDGE('',*,*,#6960,.F.);+#6960 = EDGE_CURVE('',#6961,#6933,#6963,.T.);+#6961 = VERTEX_POINT('',#6962);+#6962 = CARTESIAN_POINT('',(-0.16,-3.99529407561,0.));+#6963 = SURFACE_CURVE('',#6964,(#6968,#6975),.PCURVE_S1.);+#6964 = LINE('',#6965,#6966);+#6965 = CARTESIAN_POINT('',(-0.16,-3.938375,0.));+#6966 = VECTOR('',#6967,1.);+#6967 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6968 = PCURVE('',#6639,#6969);+#6969 = DEFINITIONAL_REPRESENTATION('',(#6970),#6974);+#6970 = LINE('',#6971,#6972);+#6971 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#6972 = VECTOR('',#6973,1.);+#6973 = DIRECTION('',(0.,1.));+#6974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6975 = PCURVE('',#6976,#6981);+#6976 = PLANE('',#6977);+#6977 = AXIS2_PLACEMENT_3D('',#6978,#6979,#6980);+#6978 = CARTESIAN_POINT('',(-0.25,-3.99529407561,0.));+#6979 = DIRECTION('',(0.,0.,1.));+#6980 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#6981 = DEFINITIONAL_REPRESENTATION('',(#6982),#6986);+#6982 = LINE('',#6983,#6984);+#6983 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#6984 = VECTOR('',#6985,1.);+#6985 = DIRECTION('',(1.,0.));+#6986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6987 = ORIENTED_EDGE('',*,*,#6988,.T.);+#6988 = EDGE_CURVE('',#6961,#6989,#6991,.T.);+#6989 = VERTEX_POINT('',#6990);+#6990 = CARTESIAN_POINT('',(-0.16,-3.865353350249,7.826567165848E-02));+#6991 = SURFACE_CURVE('',#6992,(#6997,#7004),.PCURVE_S1.);+#6992 = CIRCLE('',#6993,0.147);+#6993 = AXIS2_PLACEMENT_3D('',#6994,#6995,#6996);+#6994 = CARTESIAN_POINT('',(-0.16,-3.99529407561,0.147));+#6995 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#6996 = DIRECTION('',(0.,0.,1.));+#6997 = PCURVE('',#6639,#6998);+#6998 = DEFINITIONAL_REPRESENTATION('',(#6999),#7003);+#6999 = CIRCLE('',#7000,0.147);+#7000 = AXIS2_PLACEMENT_2D('',#7001,#7002);+#7001 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#7002 = DIRECTION('',(1.,0.));+#7003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7004 = PCURVE('',#7005,#7010);+#7005 = CYLINDRICAL_SURFACE('',#7006,0.147);+#7006 = AXIS2_PLACEMENT_3D('',#7007,#7008,#7009);+#7007 = CARTESIAN_POINT('',(-0.25,-3.99529407561,0.147));+#7008 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7009 = DIRECTION('',(0.,0.,1.));+#7010 = DEFINITIONAL_REPRESENTATION('',(#7011),#7015);+#7011 = LINE('',#7012,#7013);+#7012 = CARTESIAN_POINT('',(-0.,9.E-02));+#7013 = VECTOR('',#7014,1.);+#7014 = DIRECTION('',(1.,-0.));+#7015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7016 = ORIENTED_EDGE('',*,*,#7017,.F.);+#7017 = EDGE_CURVE('',#7018,#6989,#7020,.T.);+#7018 = VERTEX_POINT('',#7019);+#7019 = CARTESIAN_POINT('',(-0.16,-3.560206845921,0.655138379526));+#7020 = SURFACE_CURVE('',#7021,(#7025,#7032),.PCURVE_S1.);+#7021 = LINE('',#7022,#7023);+#7022 = CARTESIAN_POINT('',(-0.16,-3.533592598085,0.705452025592));+#7023 = VECTOR('',#7024,1.);+#7024 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#7025 = PCURVE('',#6639,#7026);+#7026 = DEFINITIONAL_REPRESENTATION('',(#7027),#7031);+#7027 = LINE('',#7028,#7029);+#7028 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#7029 = VECTOR('',#7030,1.);+#7030 = DIRECTION('',(-0.883950512662,0.467580464908));+#7031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7032 = PCURVE('',#7033,#7038);+#7033 = PLANE('',#7034);+#7034 = AXIS2_PLACEMENT_3D('',#7035,#7036,#7037);+#7035 = CARTESIAN_POINT('',(-0.25,-3.560206845921,0.655138379526));+#7036 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#7037 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#7038 = DEFINITIONAL_REPRESENTATION('',(#7039),#7043);+#7039 = LINE('',#7040,#7041);+#7040 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#7041 = VECTOR('',#7042,1.);+#7042 = DIRECTION('',(1.,-2.399596746007E-32));+#7043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7044 = ORIENTED_EDGE('',*,*,#7045,.F.);+#7045 = EDGE_CURVE('',#7046,#7018,#7048,.T.);+#7046 = VERTEX_POINT('',#7047);+#7047 = CARTESIAN_POINT('',(-0.16,-3.52308092439,0.6775));+#7048 = SURFACE_CURVE('',#7049,(#7054,#7061),.PCURVE_S1.);+#7049 = CIRCLE('',#7050,4.2E-02);+#7050 = AXIS2_PLACEMENT_3D('',#7051,#7052,#7053);+#7051 = CARTESIAN_POINT('',(-0.16,-3.52308092439,0.6355));+#7052 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#7053 = DIRECTION('',(0.,0.,1.));+#7054 = PCURVE('',#6639,#7055);+#7055 = DEFINITIONAL_REPRESENTATION('',(#7056),#7060);+#7056 = CIRCLE('',#7057,4.2E-02);+#7057 = AXIS2_PLACEMENT_2D('',#7058,#7059);+#7058 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#7059 = DIRECTION('',(1.,0.));+#7060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7061 = PCURVE('',#7062,#7067);+#7062 = CYLINDRICAL_SURFACE('',#7063,4.2E-02);+#7063 = AXIS2_PLACEMENT_3D('',#7064,#7065,#7066);+#7064 = CARTESIAN_POINT('',(-0.25,-3.52308092439,0.6355));+#7065 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7066 = DIRECTION('',(0.,0.,1.));+#7067 = DEFINITIONAL_REPRESENTATION('',(#7068),#7072);+#7068 = LINE('',#7069,#7070);+#7069 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#7070 = VECTOR('',#7071,1.);+#7071 = DIRECTION('',(1.,-0.));+#7072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7073 = ORIENTED_EDGE('',*,*,#7074,.F.);+#7074 = EDGE_CURVE('',#7075,#7046,#7077,.T.);+#7075 = VERTEX_POINT('',#7076);+#7076 = CARTESIAN_POINT('',(-0.16,-3.25,0.6775));+#7077 = SURFACE_CURVE('',#7078,(#7082,#7089),.PCURVE_S1.);+#7078 = LINE('',#7079,#7080);+#7079 = CARTESIAN_POINT('',(-0.16,-3.25,0.6775));+#7080 = VECTOR('',#7081,1.);+#7081 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7082 = PCURVE('',#6639,#7083);+#7083 = DEFINITIONAL_REPRESENTATION('',(#7084),#7088);+#7084 = LINE('',#7085,#7086);+#7085 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#7086 = VECTOR('',#7087,1.);+#7087 = DIRECTION('',(0.,1.));+#7088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7089 = PCURVE('',#7090,#7095);+#7090 = PLANE('',#7091);+#7091 = AXIS2_PLACEMENT_3D('',#7092,#7093,#7094);+#7092 = CARTESIAN_POINT('',(-0.25,-3.25,0.6775));+#7093 = DIRECTION('',(0.,0.,1.));+#7094 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7095 = DEFINITIONAL_REPRESENTATION('',(#7096),#7100);+#7096 = LINE('',#7097,#7098);+#7097 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#7098 = VECTOR('',#7099,1.);+#7099 = DIRECTION('',(1.,0.));+#7100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7101 = ORIENTED_EDGE('',*,*,#7102,.F.);+#7102 = EDGE_CURVE('',#7103,#7075,#7105,.T.);+#7103 = VERTEX_POINT('',#7104);+#7104 = CARTESIAN_POINT('',(-0.16,-3.2,0.713992189406));+#7105 = SURFACE_CURVE('',#7106,(#7111,#7122),.PCURVE_S1.);+#7106 = CIRCLE('',#7107,5.25E-02);+#7107 = AXIS2_PLACEMENT_3D('',#7108,#7109,#7110);+#7108 = CARTESIAN_POINT('',(-0.16,-3.25,0.73));+#7109 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7110 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7111 = PCURVE('',#6639,#7112);+#7112 = DEFINITIONAL_REPRESENTATION('',(#7113),#7121);+#7113 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7114,#7115,#7116,#7117,+#7118,#7119,#7120),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7114 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#7115 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#7116 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#7117 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#7118 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#7119 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#7120 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#7121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7122 = PCURVE('',#7123,#7128);+#7123 = CYLINDRICAL_SURFACE('',#7124,5.25E-02);+#7124 = AXIS2_PLACEMENT_3D('',#7125,#7126,#7127);+#7125 = CARTESIAN_POINT('',(-0.25,-3.25,0.73));+#7126 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7127 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7128 = DEFINITIONAL_REPRESENTATION('',(#7129),#7133);+#7129 = LINE('',#7130,#7131);+#7130 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#7131 = VECTOR('',#7132,1.);+#7132 = DIRECTION('',(-1.,-0.));+#7133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7134 = ORIENTED_EDGE('',*,*,#7135,.F.);+#7135 = EDGE_CURVE('',#6618,#7103,#7136,.T.);+#7136 = SURFACE_CURVE('',#7137,(#7141,#7148),.PCURVE_S1.);+#7137 = LINE('',#7138,#7139);+#7138 = CARTESIAN_POINT('',(-0.16,-3.2,-8.142959240193E-02));+#7139 = VECTOR('',#7140,1.);+#7140 = DIRECTION('',(0.,0.,-1.));+#7141 = PCURVE('',#6639,#7142);+#7142 = DEFINITIONAL_REPRESENTATION('',(#7143),#7147);+#7143 = LINE('',#7144,#7145);+#7144 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#7145 = VECTOR('',#7146,1.);+#7146 = DIRECTION('',(-1.,0.));+#7147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7148 = PCURVE('',#6671,#7149);+#7149 = DEFINITIONAL_REPRESENTATION('',(#7150),#7154);+#7150 = LINE('',#7151,#7152);+#7151 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#7152 = VECTOR('',#7153,1.);+#7153 = DIRECTION('',(-1.,-0.));+#7154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7155 = ADVANCED_FACE('',(#7156),#6671,.F.);+#7156 = FACE_BOUND('',#7157,.F.);+#7157 = EDGE_LOOP('',(#7158,#7159,#7182,#7203));+#7158 = ORIENTED_EDGE('',*,*,#6655,.F.);+#7159 = ORIENTED_EDGE('',*,*,#7160,.T.);+#7160 = EDGE_CURVE('',#6656,#7161,#7163,.T.);+#7161 = VERTEX_POINT('',#7162);+#7162 = CARTESIAN_POINT('',(-0.34,-3.2,0.713992189406));+#7163 = SURFACE_CURVE('',#7164,(#7168,#7175),.PCURVE_S1.);+#7164 = LINE('',#7165,#7166);+#7165 = CARTESIAN_POINT('',(-0.34,-3.2,-8.142959240193E-02));+#7166 = VECTOR('',#7167,1.);+#7167 = DIRECTION('',(0.,0.,-1.));+#7168 = PCURVE('',#6671,#7169);+#7169 = DEFINITIONAL_REPRESENTATION('',(#7170),#7174);+#7170 = LINE('',#7171,#7172);+#7171 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#7172 = VECTOR('',#7173,1.);+#7173 = DIRECTION('',(-1.,-0.));+#7174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7175 = PCURVE('',#6700,#7176);+#7176 = DEFINITIONAL_REPRESENTATION('',(#7177),#7181);+#7177 = LINE('',#7178,#7179);+#7178 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#7179 = VECTOR('',#7180,1.);+#7180 = DIRECTION('',(-1.,0.));+#7181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7182 = ORIENTED_EDGE('',*,*,#7183,.T.);+#7183 = EDGE_CURVE('',#7161,#7103,#7184,.T.);+#7184 = SURFACE_CURVE('',#7185,(#7189,#7196),.PCURVE_S1.);+#7185 = LINE('',#7186,#7187);+#7186 = CARTESIAN_POINT('',(-0.25,-3.2,0.713992189406));+#7187 = VECTOR('',#7188,1.);+#7188 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7189 = PCURVE('',#6671,#7190);+#7190 = DEFINITIONAL_REPRESENTATION('',(#7191),#7195);+#7191 = LINE('',#7192,#7193);+#7192 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#7193 = VECTOR('',#7194,1.);+#7194 = DIRECTION('',(0.,-1.));+#7195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7196 = PCURVE('',#7123,#7197);+#7197 = DEFINITIONAL_REPRESENTATION('',(#7198),#7202);+#7198 = LINE('',#7199,#7200);+#7199 = CARTESIAN_POINT('',(2.831748013849,0.));+#7200 = VECTOR('',#7201,1.);+#7201 = DIRECTION('',(-0.,1.));+#7202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7203 = ORIENTED_EDGE('',*,*,#7135,.F.);+#7204 = ADVANCED_FACE('',(#7205),#6700,.F.);+#7205 = FACE_BOUND('',#7206,.F.);+#7206 = EDGE_LOOP('',(#7207,#7208,#7209,#7233,#7256,#7280,#7303,#7326,+ #7349,#7373,#7396,#7420,#7443,#7469));+#7207 = ORIENTED_EDGE('',*,*,#6683,.F.);+#7208 = ORIENTED_EDGE('',*,*,#6746,.T.);+#7209 = ORIENTED_EDGE('',*,*,#7210,.T.);+#7210 = EDGE_CURVE('',#6747,#7211,#7213,.T.);+#7211 = VERTEX_POINT('',#7212);+#7212 = CARTESIAN_POINT('',(-0.34,-3.653021649751,0.704234328342));+#7213 = SURFACE_CURVE('',#7214,(#7219,#7226),.PCURVE_S1.);+#7214 = CIRCLE('',#7215,0.147);+#7215 = AXIS2_PLACEMENT_3D('',#7216,#7217,#7218);+#7216 = CARTESIAN_POINT('',(-0.34,-3.52308092439,0.6355));+#7217 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#7218 = DIRECTION('',(0.,0.,1.));+#7219 = PCURVE('',#6700,#7220);+#7220 = DEFINITIONAL_REPRESENTATION('',(#7221),#7225);+#7221 = CIRCLE('',#7222,0.147);+#7222 = AXIS2_PLACEMENT_2D('',#7223,#7224);+#7223 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#7224 = DIRECTION('',(1.,0.));+#7225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7226 = PCURVE('',#6785,#7227);+#7227 = DEFINITIONAL_REPRESENTATION('',(#7228),#7232);+#7228 = LINE('',#7229,#7230);+#7229 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#7230 = VECTOR('',#7231,1.);+#7231 = DIRECTION('',(1.,0.));+#7232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7233 = ORIENTED_EDGE('',*,*,#7234,.T.);+#7234 = EDGE_CURVE('',#7211,#7235,#7237,.T.);+#7235 = VERTEX_POINT('',#7236);+#7236 = CARTESIAN_POINT('',(-0.34,-3.958168154079,0.127361620474));+#7237 = SURFACE_CURVE('',#7238,(#7242,#7249),.PCURVE_S1.);+#7238 = LINE('',#7239,#7240);+#7239 = CARTESIAN_POINT('',(-0.34,-3.626407401915,0.754547974408));+#7240 = VECTOR('',#7241,1.);+#7241 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#7242 = PCURVE('',#6700,#7243);+#7243 = DEFINITIONAL_REPRESENTATION('',(#7244),#7248);+#7244 = LINE('',#7245,#7246);+#7245 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#7246 = VECTOR('',#7247,1.);+#7247 = DIRECTION('',(-0.883950512662,0.467580464908));+#7248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7249 = PCURVE('',#6863,#7250);+#7250 = DEFINITIONAL_REPRESENTATION('',(#7251),#7255);+#7251 = LINE('',#7252,#7253);+#7252 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#7253 = VECTOR('',#7254,1.);+#7254 = DIRECTION('',(1.,-2.399596746007E-32));+#7255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7256 = ORIENTED_EDGE('',*,*,#7257,.F.);+#7257 = EDGE_CURVE('',#7258,#7235,#7260,.T.);+#7258 = VERTEX_POINT('',#7259);+#7259 = CARTESIAN_POINT('',(-0.34,-3.99529407561,0.105));+#7260 = SURFACE_CURVE('',#7261,(#7266,#7273),.PCURVE_S1.);+#7261 = CIRCLE('',#7262,4.2E-02);+#7262 = AXIS2_PLACEMENT_3D('',#7263,#7264,#7265);+#7263 = CARTESIAN_POINT('',(-0.34,-3.99529407561,0.147));+#7264 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#7265 = DIRECTION('',(0.,0.,1.));+#7266 = PCURVE('',#6700,#7267);+#7267 = DEFINITIONAL_REPRESENTATION('',(#7268),#7272);+#7268 = CIRCLE('',#7269,4.2E-02);+#7269 = AXIS2_PLACEMENT_2D('',#7270,#7271);+#7270 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#7271 = DIRECTION('',(1.,0.));+#7272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7273 = PCURVE('',#6892,#7274);+#7274 = DEFINITIONAL_REPRESENTATION('',(#7275),#7279);+#7275 = LINE('',#7276,#7277);+#7276 = CARTESIAN_POINT('',(0.,-9.E-02));+#7277 = VECTOR('',#7278,1.);+#7278 = DIRECTION('',(1.,0.));+#7279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7280 = ORIENTED_EDGE('',*,*,#7281,.T.);+#7281 = EDGE_CURVE('',#7258,#7282,#7284,.T.);+#7282 = VERTEX_POINT('',#7283);+#7283 = CARTESIAN_POINT('',(-0.34,-4.43,0.105));+#7284 = SURFACE_CURVE('',#7285,(#7289,#7296),.PCURVE_S1.);+#7285 = LINE('',#7286,#7287);+#7286 = CARTESIAN_POINT('',(-0.34,-3.938375,0.105));+#7287 = VECTOR('',#7288,1.);+#7288 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7289 = PCURVE('',#6700,#7290);+#7290 = DEFINITIONAL_REPRESENTATION('',(#7291),#7295);+#7291 = LINE('',#7292,#7293);+#7292 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#7293 = VECTOR('',#7294,1.);+#7294 = DIRECTION('',(0.,1.));+#7295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7296 = PCURVE('',#6920,#7297);+#7297 = DEFINITIONAL_REPRESENTATION('',(#7298),#7302);+#7298 = LINE('',#7299,#7300);+#7299 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#7300 = VECTOR('',#7301,1.);+#7301 = DIRECTION('',(1.,0.));+#7302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7303 = ORIENTED_EDGE('',*,*,#7304,.T.);+#7304 = EDGE_CURVE('',#7282,#7305,#7307,.T.);+#7305 = VERTEX_POINT('',#7306);+#7306 = CARTESIAN_POINT('',(-0.34,-4.43,0.));+#7307 = SURFACE_CURVE('',#7308,(#7312,#7319),.PCURVE_S1.);+#7308 = LINE('',#7309,#7310);+#7309 = CARTESIAN_POINT('',(-0.34,-4.43,-8.142959240193E-02));+#7310 = VECTOR('',#7311,1.);+#7311 = DIRECTION('',(0.,0.,-1.));+#7312 = PCURVE('',#6700,#7313);+#7313 = DEFINITIONAL_REPRESENTATION('',(#7314),#7318);+#7314 = LINE('',#7315,#7316);+#7315 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#7316 = VECTOR('',#7317,1.);+#7317 = DIRECTION('',(-1.,0.));+#7318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7319 = PCURVE('',#6948,#7320);+#7320 = DEFINITIONAL_REPRESENTATION('',(#7321),#7325);+#7321 = LINE('',#7322,#7323);+#7322 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#7323 = VECTOR('',#7324,1.);+#7324 = DIRECTION('',(-1.,-0.));+#7325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7326 = ORIENTED_EDGE('',*,*,#7327,.F.);+#7327 = EDGE_CURVE('',#7328,#7305,#7330,.T.);+#7328 = VERTEX_POINT('',#7329);+#7329 = CARTESIAN_POINT('',(-0.34,-3.99529407561,0.));+#7330 = SURFACE_CURVE('',#7331,(#7335,#7342),.PCURVE_S1.);+#7331 = LINE('',#7332,#7333);+#7332 = CARTESIAN_POINT('',(-0.34,-3.938375,0.));+#7333 = VECTOR('',#7334,1.);+#7334 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7335 = PCURVE('',#6700,#7336);+#7336 = DEFINITIONAL_REPRESENTATION('',(#7337),#7341);+#7337 = LINE('',#7338,#7339);+#7338 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#7339 = VECTOR('',#7340,1.);+#7340 = DIRECTION('',(0.,1.));+#7341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7342 = PCURVE('',#6976,#7343);+#7343 = DEFINITIONAL_REPRESENTATION('',(#7344),#7348);+#7344 = LINE('',#7345,#7346);+#7345 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#7346 = VECTOR('',#7347,1.);+#7347 = DIRECTION('',(1.,0.));+#7348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7349 = ORIENTED_EDGE('',*,*,#7350,.T.);+#7350 = EDGE_CURVE('',#7328,#7351,#7353,.T.);+#7351 = VERTEX_POINT('',#7352);+#7352 = CARTESIAN_POINT('',(-0.34,-3.865353350249,7.826567165848E-02));+#7353 = SURFACE_CURVE('',#7354,(#7359,#7366),.PCURVE_S1.);+#7354 = CIRCLE('',#7355,0.147);+#7355 = AXIS2_PLACEMENT_3D('',#7356,#7357,#7358);+#7356 = CARTESIAN_POINT('',(-0.34,-3.99529407561,0.147));+#7357 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#7358 = DIRECTION('',(0.,0.,1.));+#7359 = PCURVE('',#6700,#7360);+#7360 = DEFINITIONAL_REPRESENTATION('',(#7361),#7365);+#7361 = CIRCLE('',#7362,0.147);+#7362 = AXIS2_PLACEMENT_2D('',#7363,#7364);+#7363 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#7364 = DIRECTION('',(1.,0.));+#7365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7366 = PCURVE('',#7005,#7367);+#7367 = DEFINITIONAL_REPRESENTATION('',(#7368),#7372);+#7368 = LINE('',#7369,#7370);+#7369 = CARTESIAN_POINT('',(0.,-9.E-02));+#7370 = VECTOR('',#7371,1.);+#7371 = DIRECTION('',(1.,0.));+#7372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7373 = ORIENTED_EDGE('',*,*,#7374,.F.);+#7374 = EDGE_CURVE('',#7375,#7351,#7377,.T.);+#7375 = VERTEX_POINT('',#7376);+#7376 = CARTESIAN_POINT('',(-0.34,-3.560206845921,0.655138379526));+#7377 = SURFACE_CURVE('',#7378,(#7382,#7389),.PCURVE_S1.);+#7378 = LINE('',#7379,#7380);+#7379 = CARTESIAN_POINT('',(-0.34,-3.533592598085,0.705452025592));+#7380 = VECTOR('',#7381,1.);+#7381 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#7382 = PCURVE('',#6700,#7383);+#7383 = DEFINITIONAL_REPRESENTATION('',(#7384),#7388);+#7384 = LINE('',#7385,#7386);+#7385 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#7386 = VECTOR('',#7387,1.);+#7387 = DIRECTION('',(-0.883950512662,0.467580464908));+#7388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7389 = PCURVE('',#7033,#7390);+#7390 = DEFINITIONAL_REPRESENTATION('',(#7391),#7395);+#7391 = LINE('',#7392,#7393);+#7392 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#7393 = VECTOR('',#7394,1.);+#7394 = DIRECTION('',(1.,-2.399596746007E-32));+#7395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7396 = ORIENTED_EDGE('',*,*,#7397,.F.);+#7397 = EDGE_CURVE('',#7398,#7375,#7400,.T.);+#7398 = VERTEX_POINT('',#7399);+#7399 = CARTESIAN_POINT('',(-0.34,-3.52308092439,0.6775));+#7400 = SURFACE_CURVE('',#7401,(#7406,#7413),.PCURVE_S1.);+#7401 = CIRCLE('',#7402,4.2E-02);+#7402 = AXIS2_PLACEMENT_3D('',#7403,#7404,#7405);+#7403 = CARTESIAN_POINT('',(-0.34,-3.52308092439,0.6355));+#7404 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#7405 = DIRECTION('',(0.,0.,1.));+#7406 = PCURVE('',#6700,#7407);+#7407 = DEFINITIONAL_REPRESENTATION('',(#7408),#7412);+#7408 = CIRCLE('',#7409,4.2E-02);+#7409 = AXIS2_PLACEMENT_2D('',#7410,#7411);+#7410 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#7411 = DIRECTION('',(1.,0.));+#7412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7413 = PCURVE('',#7062,#7414);+#7414 = DEFINITIONAL_REPRESENTATION('',(#7415),#7419);+#7415 = LINE('',#7416,#7417);+#7416 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#7417 = VECTOR('',#7418,1.);+#7418 = DIRECTION('',(1.,0.));+#7419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7420 = ORIENTED_EDGE('',*,*,#7421,.F.);+#7421 = EDGE_CURVE('',#7422,#7398,#7424,.T.);+#7422 = VERTEX_POINT('',#7423);+#7423 = CARTESIAN_POINT('',(-0.34,-3.25,0.6775));+#7424 = SURFACE_CURVE('',#7425,(#7429,#7436),.PCURVE_S1.);+#7425 = LINE('',#7426,#7427);+#7426 = CARTESIAN_POINT('',(-0.34,-3.25,0.6775));+#7427 = VECTOR('',#7428,1.);+#7428 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7429 = PCURVE('',#6700,#7430);+#7430 = DEFINITIONAL_REPRESENTATION('',(#7431),#7435);+#7431 = LINE('',#7432,#7433);+#7432 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#7433 = VECTOR('',#7434,1.);+#7434 = DIRECTION('',(0.,1.));+#7435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7436 = PCURVE('',#7090,#7437);+#7437 = DEFINITIONAL_REPRESENTATION('',(#7438),#7442);+#7438 = LINE('',#7439,#7440);+#7439 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#7440 = VECTOR('',#7441,1.);+#7441 = DIRECTION('',(1.,0.));+#7442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7443 = ORIENTED_EDGE('',*,*,#7444,.F.);+#7444 = EDGE_CURVE('',#7161,#7422,#7445,.T.);+#7445 = SURFACE_CURVE('',#7446,(#7451,#7462),.PCURVE_S1.);+#7446 = CIRCLE('',#7447,5.25E-02);+#7447 = AXIS2_PLACEMENT_3D('',#7448,#7449,#7450);+#7448 = CARTESIAN_POINT('',(-0.34,-3.25,0.73));+#7449 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7450 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7451 = PCURVE('',#6700,#7452);+#7452 = DEFINITIONAL_REPRESENTATION('',(#7453),#7461);+#7453 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7454,#7455,#7456,#7457,+#7458,#7459,#7460),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7454 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#7455 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#7456 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#7457 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#7458 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#7459 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#7460 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#7461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7462 = PCURVE('',#7123,#7463);+#7463 = DEFINITIONAL_REPRESENTATION('',(#7464),#7468);+#7464 = LINE('',#7465,#7466);+#7465 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#7466 = VECTOR('',#7467,1.);+#7467 = DIRECTION('',(-1.,0.));+#7468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7469 = ORIENTED_EDGE('',*,*,#7160,.F.);+#7470 = ADVANCED_FACE('',(#7471),#6785,.T.);+#7471 = FACE_BOUND('',#7472,.T.);+#7472 = EDGE_LOOP('',(#7473,#7474,#7475,#7496));+#7473 = ORIENTED_EDGE('',*,*,#6769,.F.);+#7474 = ORIENTED_EDGE('',*,*,#7210,.T.);+#7475 = ORIENTED_EDGE('',*,*,#7476,.T.);+#7476 = EDGE_CURVE('',#7211,#6824,#7477,.T.);+#7477 = SURFACE_CURVE('',#7478,(#7482,#7489),.PCURVE_S1.);+#7478 = LINE('',#7479,#7480);+#7479 = CARTESIAN_POINT('',(-0.34,-3.653021649751,0.704234328342));+#7480 = VECTOR('',#7481,1.);+#7481 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7482 = PCURVE('',#6785,#7483);+#7483 = DEFINITIONAL_REPRESENTATION('',(#7484),#7488);+#7484 = LINE('',#7485,#7486);+#7485 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#7486 = VECTOR('',#7487,1.);+#7487 = DIRECTION('',(-0.,1.));+#7488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7489 = PCURVE('',#6863,#7490);+#7490 = DEFINITIONAL_REPRESENTATION('',(#7491),#7495);+#7491 = LINE('',#7492,#7493);+#7492 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#7493 = VECTOR('',#7494,1.);+#7494 = DIRECTION('',(4.767113258106E-29,1.));+#7495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7496 = ORIENTED_EDGE('',*,*,#6823,.F.);+#7497 = ADVANCED_FACE('',(#7498),#7123,.T.);+#7498 = FACE_BOUND('',#7499,.T.);+#7499 = EDGE_LOOP('',(#7500,#7501,#7522,#7523));+#7500 = ORIENTED_EDGE('',*,*,#7102,.T.);+#7501 = ORIENTED_EDGE('',*,*,#7502,.T.);+#7502 = EDGE_CURVE('',#7075,#7422,#7503,.T.);+#7503 = SURFACE_CURVE('',#7504,(#7508,#7515),.PCURVE_S1.);+#7504 = LINE('',#7505,#7506);+#7505 = CARTESIAN_POINT('',(-0.16,-3.25,0.6775));+#7506 = VECTOR('',#7507,1.);+#7507 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7508 = PCURVE('',#7123,#7509);+#7509 = DEFINITIONAL_REPRESENTATION('',(#7510),#7514);+#7510 = LINE('',#7511,#7512);+#7511 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#7512 = VECTOR('',#7513,1.);+#7513 = DIRECTION('',(-0.,-1.));+#7514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7515 = PCURVE('',#7090,#7516);+#7516 = DEFINITIONAL_REPRESENTATION('',(#7517),#7521);+#7517 = LINE('',#7518,#7519);+#7518 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#7519 = VECTOR('',#7520,1.);+#7520 = DIRECTION('',(0.,-1.));+#7521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7522 = ORIENTED_EDGE('',*,*,#7444,.F.);+#7523 = ORIENTED_EDGE('',*,*,#7183,.T.);+#7524 = ADVANCED_FACE('',(#7525),#7090,.F.);+#7525 = FACE_BOUND('',#7526,.F.);+#7526 = EDGE_LOOP('',(#7527,#7528,#7549,#7550));+#7527 = ORIENTED_EDGE('',*,*,#7421,.T.);+#7528 = ORIENTED_EDGE('',*,*,#7529,.F.);+#7529 = EDGE_CURVE('',#7046,#7398,#7530,.T.);+#7530 = SURFACE_CURVE('',#7531,(#7535,#7542),.PCURVE_S1.);+#7531 = LINE('',#7532,#7533);+#7532 = CARTESIAN_POINT('',(-0.16,-3.52308092439,0.6775));+#7533 = VECTOR('',#7534,1.);+#7534 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7535 = PCURVE('',#7090,#7536);+#7536 = DEFINITIONAL_REPRESENTATION('',(#7537),#7541);+#7537 = LINE('',#7538,#7539);+#7538 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#7539 = VECTOR('',#7540,1.);+#7540 = DIRECTION('',(0.,-1.));+#7541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7542 = PCURVE('',#7062,#7543);+#7543 = DEFINITIONAL_REPRESENTATION('',(#7544),#7548);+#7544 = LINE('',#7545,#7546);+#7545 = CARTESIAN_POINT('',(0.,9.E-02));+#7546 = VECTOR('',#7547,1.);+#7547 = DIRECTION('',(0.,-1.));+#7548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7549 = ORIENTED_EDGE('',*,*,#7074,.F.);+#7550 = ORIENTED_EDGE('',*,*,#7502,.T.);+#7551 = ADVANCED_FACE('',(#7552),#7062,.F.);+#7552 = FACE_BOUND('',#7553,.F.);+#7553 = EDGE_LOOP('',(#7554,#7555,#7576,#7577));+#7554 = ORIENTED_EDGE('',*,*,#7397,.T.);+#7555 = ORIENTED_EDGE('',*,*,#7556,.F.);+#7556 = EDGE_CURVE('',#7018,#7375,#7557,.T.);+#7557 = SURFACE_CURVE('',#7558,(#7562,#7569),.PCURVE_S1.);+#7558 = LINE('',#7559,#7560);+#7559 = CARTESIAN_POINT('',(-0.16,-3.560206845921,0.655138379526));+#7560 = VECTOR('',#7561,1.);+#7561 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7562 = PCURVE('',#7062,#7563);+#7563 = DEFINITIONAL_REPRESENTATION('',(#7564),#7568);+#7564 = LINE('',#7565,#7566);+#7565 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#7566 = VECTOR('',#7567,1.);+#7567 = DIRECTION('',(0.,-1.));+#7568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7569 = PCURVE('',#7033,#7570);+#7570 = DEFINITIONAL_REPRESENTATION('',(#7571),#7575);+#7571 = LINE('',#7572,#7573);+#7572 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#7573 = VECTOR('',#7574,1.);+#7574 = DIRECTION('',(-4.767113258106E-29,-1.));+#7575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7576 = ORIENTED_EDGE('',*,*,#7045,.F.);+#7577 = ORIENTED_EDGE('',*,*,#7529,.T.);+#7578 = ADVANCED_FACE('',(#7579),#7033,.F.);+#7579 = FACE_BOUND('',#7580,.F.);+#7580 = EDGE_LOOP('',(#7581,#7582,#7603,#7604));+#7581 = ORIENTED_EDGE('',*,*,#7374,.T.);+#7582 = ORIENTED_EDGE('',*,*,#7583,.F.);+#7583 = EDGE_CURVE('',#6989,#7351,#7584,.T.);+#7584 = SURFACE_CURVE('',#7585,(#7589,#7596),.PCURVE_S1.);+#7585 = LINE('',#7586,#7587);+#7586 = CARTESIAN_POINT('',(-0.16,-3.865353350249,7.826567165848E-02));+#7587 = VECTOR('',#7588,1.);+#7588 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7589 = PCURVE('',#7033,#7590);+#7590 = DEFINITIONAL_REPRESENTATION('',(#7591),#7595);+#7591 = LINE('',#7592,#7593);+#7592 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#7593 = VECTOR('',#7594,1.);+#7594 = DIRECTION('',(-4.767113258106E-29,-1.));+#7595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7596 = PCURVE('',#7005,#7597);+#7597 = DEFINITIONAL_REPRESENTATION('',(#7598),#7602);+#7598 = LINE('',#7599,#7600);+#7599 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#7600 = VECTOR('',#7601,1.);+#7601 = DIRECTION('',(0.,-1.));+#7602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7603 = ORIENTED_EDGE('',*,*,#7017,.F.);+#7604 = ORIENTED_EDGE('',*,*,#7556,.T.);+#7605 = ADVANCED_FACE('',(#7606),#7005,.T.);+#7606 = FACE_BOUND('',#7607,.T.);+#7607 = EDGE_LOOP('',(#7608,#7609,#7610,#7611));+#7608 = ORIENTED_EDGE('',*,*,#7350,.T.);+#7609 = ORIENTED_EDGE('',*,*,#7583,.F.);+#7610 = ORIENTED_EDGE('',*,*,#6988,.F.);+#7611 = ORIENTED_EDGE('',*,*,#7612,.T.);+#7612 = EDGE_CURVE('',#6961,#7328,#7613,.T.);+#7613 = SURFACE_CURVE('',#7614,(#7618,#7625),.PCURVE_S1.);+#7614 = LINE('',#7615,#7616);+#7615 = CARTESIAN_POINT('',(-0.16,-3.99529407561,0.));+#7616 = VECTOR('',#7617,1.);+#7617 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7618 = PCURVE('',#7005,#7619);+#7619 = DEFINITIONAL_REPRESENTATION('',(#7620),#7624);+#7620 = LINE('',#7621,#7622);+#7621 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#7622 = VECTOR('',#7623,1.);+#7623 = DIRECTION('',(0.,-1.));+#7624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7625 = PCURVE('',#6976,#7626);+#7626 = DEFINITIONAL_REPRESENTATION('',(#7627),#7631);+#7627 = LINE('',#7628,#7629);+#7628 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#7629 = VECTOR('',#7630,1.);+#7630 = DIRECTION('',(0.,-1.));+#7631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7632 = ADVANCED_FACE('',(#7633),#6976,.F.);+#7633 = FACE_BOUND('',#7634,.F.);+#7634 = EDGE_LOOP('',(#7635,#7636,#7637,#7658));+#7635 = ORIENTED_EDGE('',*,*,#7612,.T.);+#7636 = ORIENTED_EDGE('',*,*,#7327,.T.);+#7637 = ORIENTED_EDGE('',*,*,#7638,.T.);+#7638 = EDGE_CURVE('',#7305,#6933,#7639,.T.);+#7639 = SURFACE_CURVE('',#7640,(#7644,#7651),.PCURVE_S1.);+#7640 = LINE('',#7641,#7642);+#7641 = CARTESIAN_POINT('',(-0.545,-4.43,0.));+#7642 = VECTOR('',#7643,1.);+#7643 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7644 = PCURVE('',#6976,#7645);+#7645 = DEFINITIONAL_REPRESENTATION('',(#7646),#7650);+#7646 = LINE('',#7647,#7648);+#7647 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#7648 = VECTOR('',#7649,1.);+#7649 = DIRECTION('',(0.,1.));+#7650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7651 = PCURVE('',#6948,#7652);+#7652 = DEFINITIONAL_REPRESENTATION('',(#7653),#7657);+#7653 = LINE('',#7654,#7655);+#7654 = CARTESIAN_POINT('',(0.5,-0.295));+#7655 = VECTOR('',#7656,1.);+#7656 = DIRECTION('',(0.,-1.));+#7657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7658 = ORIENTED_EDGE('',*,*,#6960,.F.);+#7659 = ADVANCED_FACE('',(#7660),#6948,.T.);+#7660 = FACE_BOUND('',#7661,.T.);+#7661 = EDGE_LOOP('',(#7662,#7663,#7684,#7685));+#7662 = ORIENTED_EDGE('',*,*,#6932,.F.);+#7663 = ORIENTED_EDGE('',*,*,#7664,.F.);+#7664 = EDGE_CURVE('',#7282,#6905,#7665,.T.);+#7665 = SURFACE_CURVE('',#7666,(#7670,#7677),.PCURVE_S1.);+#7666 = LINE('',#7667,#7668);+#7667 = CARTESIAN_POINT('',(-0.545,-4.43,0.105));+#7668 = VECTOR('',#7669,1.);+#7669 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7670 = PCURVE('',#6948,#7671);+#7671 = DEFINITIONAL_REPRESENTATION('',(#7672),#7676);+#7672 = LINE('',#7673,#7674);+#7673 = CARTESIAN_POINT('',(0.605,-0.295));+#7674 = VECTOR('',#7675,1.);+#7675 = DIRECTION('',(0.,-1.));+#7676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7677 = PCURVE('',#6920,#7678);+#7678 = DEFINITIONAL_REPRESENTATION('',(#7679),#7683);+#7679 = LINE('',#7680,#7681);+#7680 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#7681 = VECTOR('',#7682,1.);+#7682 = DIRECTION('',(0.,1.));+#7683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7684 = ORIENTED_EDGE('',*,*,#7304,.T.);+#7685 = ORIENTED_EDGE('',*,*,#7638,.T.);+#7686 = ADVANCED_FACE('',(#7687),#6920,.T.);+#7687 = FACE_BOUND('',#7688,.T.);+#7688 = EDGE_LOOP('',(#7689,#7710,#7711,#7712));+#7689 = ORIENTED_EDGE('',*,*,#7690,.T.);+#7690 = EDGE_CURVE('',#6876,#7258,#7691,.T.);+#7691 = SURFACE_CURVE('',#7692,(#7696,#7703),.PCURVE_S1.);+#7692 = LINE('',#7693,#7694);+#7693 = CARTESIAN_POINT('',(-0.16,-3.99529407561,0.105));+#7694 = VECTOR('',#7695,1.);+#7695 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7696 = PCURVE('',#6920,#7697);+#7697 = DEFINITIONAL_REPRESENTATION('',(#7698),#7702);+#7698 = LINE('',#7699,#7700);+#7699 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#7700 = VECTOR('',#7701,1.);+#7701 = DIRECTION('',(0.,-1.));+#7702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7703 = PCURVE('',#6892,#7704);+#7704 = DEFINITIONAL_REPRESENTATION('',(#7705),#7709);+#7705 = LINE('',#7706,#7707);+#7706 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#7707 = VECTOR('',#7708,1.);+#7708 = DIRECTION('',(0.,-1.));+#7709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7710 = ORIENTED_EDGE('',*,*,#7281,.T.);+#7711 = ORIENTED_EDGE('',*,*,#7664,.T.);+#7712 = ORIENTED_EDGE('',*,*,#6904,.F.);+#7713 = ADVANCED_FACE('',(#7714),#6892,.F.);+#7714 = FACE_BOUND('',#7715,.F.);+#7715 = EDGE_LOOP('',(#7716,#7717,#7738,#7739));+#7716 = ORIENTED_EDGE('',*,*,#7257,.T.);+#7717 = ORIENTED_EDGE('',*,*,#7718,.F.);+#7718 = EDGE_CURVE('',#6848,#7235,#7719,.T.);+#7719 = SURFACE_CURVE('',#7720,(#7724,#7731),.PCURVE_S1.);+#7720 = LINE('',#7721,#7722);+#7721 = CARTESIAN_POINT('',(-0.16,-3.958168154079,0.127361620474));+#7722 = VECTOR('',#7723,1.);+#7723 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7724 = PCURVE('',#6892,#7725);+#7725 = DEFINITIONAL_REPRESENTATION('',(#7726),#7730);+#7726 = LINE('',#7727,#7728);+#7727 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#7728 = VECTOR('',#7729,1.);+#7729 = DIRECTION('',(0.,-1.));+#7730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7731 = PCURVE('',#6863,#7732);+#7732 = DEFINITIONAL_REPRESENTATION('',(#7733),#7737);+#7733 = LINE('',#7734,#7735);+#7734 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#7735 = VECTOR('',#7736,1.);+#7736 = DIRECTION('',(-4.767113258106E-29,-1.));+#7737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7738 = ORIENTED_EDGE('',*,*,#6875,.F.);+#7739 = ORIENTED_EDGE('',*,*,#7690,.T.);+#7740 = ADVANCED_FACE('',(#7741),#6863,.T.);+#7741 = FACE_BOUND('',#7742,.T.);+#7742 = EDGE_LOOP('',(#7743,#7744,#7745,#7746));+#7743 = ORIENTED_EDGE('',*,*,#7476,.F.);+#7744 = ORIENTED_EDGE('',*,*,#7234,.T.);+#7745 = ORIENTED_EDGE('',*,*,#7718,.F.);+#7746 = ORIENTED_EDGE('',*,*,#6847,.F.);+#7747 = MANIFOLD_SOLID_BREP('',#7748);+#7748 = CLOSED_SHELL('',(#7749,#7879,#7955,#8293,#8342,#8608,#8635,#8662+ ,#8689,#8716,#8743,#8770,#8797,#8824,#8851,#8878));+#7749 = ADVANCED_FACE('',(#7750),#7765,.T.);+#7750 = FACE_BOUND('',#7751,.T.);+#7751 = EDGE_LOOP('',(#7752,#7792,#7820,#7853));+#7752 = ORIENTED_EDGE('',*,*,#7753,.T.);+#7753 = EDGE_CURVE('',#7754,#7756,#7758,.T.);+#7754 = VERTEX_POINT('',#7755);+#7755 = CARTESIAN_POINT('',(0.34,-3.25,0.7825));+#7756 = VERTEX_POINT('',#7757);+#7757 = CARTESIAN_POINT('',(0.34,-3.2,0.746007810594));+#7758 = SURFACE_CURVE('',#7759,(#7764,#7776),.PCURVE_S1.);+#7759 = CIRCLE('',#7760,5.25E-02);+#7760 = AXIS2_PLACEMENT_3D('',#7761,#7762,#7763);+#7761 = CARTESIAN_POINT('',(0.34,-3.25,0.73));+#7762 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7763 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7764 = PCURVE('',#7765,#7770);+#7765 = CYLINDRICAL_SURFACE('',#7766,5.25E-02);+#7766 = AXIS2_PLACEMENT_3D('',#7767,#7768,#7769);+#7767 = CARTESIAN_POINT('',(0.25,-3.25,0.73));+#7768 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7769 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7770 = DEFINITIONAL_REPRESENTATION('',(#7771),#7775);+#7771 = LINE('',#7772,#7773);+#7772 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#7773 = VECTOR('',#7774,1.);+#7774 = DIRECTION('',(-1.,-0.));+#7775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7776 = PCURVE('',#7777,#7782);+#7777 = PLANE('',#7778);+#7778 = AXIS2_PLACEMENT_3D('',#7779,#7780,#7781);+#7779 = CARTESIAN_POINT('',(0.34,-3.861815252728,0.337140815196));+#7780 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7781 = DIRECTION('',(0.,0.,1.));+#7782 = DEFINITIONAL_REPRESENTATION('',(#7783),#7791);+#7783 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7784,#7785,#7786,#7787,+#7788,#7789,#7790),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7784 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#7785 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#7786 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#7787 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#7788 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#7789 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#7790 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#7791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7792 = ORIENTED_EDGE('',*,*,#7793,.F.);+#7793 = EDGE_CURVE('',#7794,#7756,#7796,.T.);+#7794 = VERTEX_POINT('',#7795);+#7795 = CARTESIAN_POINT('',(0.16,-3.2,0.746007810594));+#7796 = SURFACE_CURVE('',#7797,(#7801,#7808),.PCURVE_S1.);+#7797 = LINE('',#7798,#7799);+#7798 = CARTESIAN_POINT('',(0.25,-3.2,0.746007810594));+#7799 = VECTOR('',#7800,1.);+#7800 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7801 = PCURVE('',#7765,#7802);+#7802 = DEFINITIONAL_REPRESENTATION('',(#7803),#7807);+#7803 = LINE('',#7804,#7805);+#7804 = CARTESIAN_POINT('',(3.451437293332,0.));+#7805 = VECTOR('',#7806,1.);+#7806 = DIRECTION('',(-0.,1.));+#7807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7808 = PCURVE('',#7809,#7814);+#7809 = PLANE('',#7810);+#7810 = AXIS2_PLACEMENT_3D('',#7811,#7812,#7813);+#7811 = CARTESIAN_POINT('',(-0.34,-3.2,-0.5));+#7812 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7813 = DIRECTION('',(0.,0.,1.));+#7814 = DEFINITIONAL_REPRESENTATION('',(#7815),#7819);+#7815 = LINE('',#7816,#7817);+#7816 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#7817 = VECTOR('',#7818,1.);+#7818 = DIRECTION('',(0.,-1.));+#7819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7820 = ORIENTED_EDGE('',*,*,#7821,.F.);+#7821 = EDGE_CURVE('',#7822,#7794,#7824,.T.);+#7822 = VERTEX_POINT('',#7823);+#7823 = CARTESIAN_POINT('',(0.16,-3.25,0.7825));+#7824 = SURFACE_CURVE('',#7825,(#7830,#7837),.PCURVE_S1.);+#7825 = CIRCLE('',#7826,5.25E-02);+#7826 = AXIS2_PLACEMENT_3D('',#7827,#7828,#7829);+#7827 = CARTESIAN_POINT('',(0.16,-3.25,0.73));+#7828 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#7829 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7830 = PCURVE('',#7765,#7831);+#7831 = DEFINITIONAL_REPRESENTATION('',(#7832),#7836);+#7832 = LINE('',#7833,#7834);+#7833 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#7834 = VECTOR('',#7835,1.);+#7835 = DIRECTION('',(-1.,0.));+#7836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7837 = PCURVE('',#7838,#7843);+#7838 = PLANE('',#7839);+#7839 = AXIS2_PLACEMENT_3D('',#7840,#7841,#7842);+#7840 = CARTESIAN_POINT('',(0.16,-3.861815252728,0.337140815196));+#7841 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7842 = DIRECTION('',(0.,0.,1.));+#7843 = DEFINITIONAL_REPRESENTATION('',(#7844),#7852);+#7844 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7845,#7846,#7847,#7848,+#7849,#7850,#7851),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#7845 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#7846 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#7847 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#7848 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#7849 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#7850 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#7851 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#7852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7853 = ORIENTED_EDGE('',*,*,#7854,.T.);+#7854 = EDGE_CURVE('',#7822,#7754,#7855,.T.);+#7855 = SURFACE_CURVE('',#7856,(#7860,#7867),.PCURVE_S1.);+#7856 = LINE('',#7857,#7858);+#7857 = CARTESIAN_POINT('',(0.16,-3.25,0.7825));+#7858 = VECTOR('',#7859,1.);+#7859 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7860 = PCURVE('',#7765,#7861);+#7861 = DEFINITIONAL_REPRESENTATION('',(#7862),#7866);+#7862 = LINE('',#7863,#7864);+#7863 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#7864 = VECTOR('',#7865,1.);+#7865 = DIRECTION('',(0.,1.));+#7866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7867 = PCURVE('',#7868,#7873);+#7868 = PLANE('',#7869);+#7869 = AXIS2_PLACEMENT_3D('',#7870,#7871,#7872);+#7870 = CARTESIAN_POINT('',(0.25,-3.25,0.7825));+#7871 = DIRECTION('',(0.,0.,1.));+#7872 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7873 = DEFINITIONAL_REPRESENTATION('',(#7874),#7878);+#7874 = LINE('',#7875,#7876);+#7875 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#7876 = VECTOR('',#7877,1.);+#7877 = DIRECTION('',(0.,1.));+#7878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7879 = ADVANCED_FACE('',(#7880),#7868,.T.);+#7880 = FACE_BOUND('',#7881,.T.);+#7881 = EDGE_LOOP('',(#7882,#7883,#7906,#7934));+#7882 = ORIENTED_EDGE('',*,*,#7854,.F.);+#7883 = ORIENTED_EDGE('',*,*,#7884,.T.);+#7884 = EDGE_CURVE('',#7822,#7885,#7887,.T.);+#7885 = VERTEX_POINT('',#7886);+#7886 = CARTESIAN_POINT('',(0.16,-3.52308092439,0.7825));+#7887 = SURFACE_CURVE('',#7888,(#7892,#7899),.PCURVE_S1.);+#7888 = LINE('',#7889,#7890);+#7889 = CARTESIAN_POINT('',(0.16,-3.25,0.7825));+#7890 = VECTOR('',#7891,1.);+#7891 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7892 = PCURVE('',#7868,#7893);+#7893 = DEFINITIONAL_REPRESENTATION('',(#7894),#7898);+#7894 = LINE('',#7895,#7896);+#7895 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#7896 = VECTOR('',#7897,1.);+#7897 = DIRECTION('',(1.,0.));+#7898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7899 = PCURVE('',#7838,#7900);+#7900 = DEFINITIONAL_REPRESENTATION('',(#7901),#7905);+#7901 = LINE('',#7902,#7903);+#7902 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#7903 = VECTOR('',#7904,1.);+#7904 = DIRECTION('',(0.,1.));+#7905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7906 = ORIENTED_EDGE('',*,*,#7907,.T.);+#7907 = EDGE_CURVE('',#7885,#7908,#7910,.T.);+#7908 = VERTEX_POINT('',#7909);+#7909 = CARTESIAN_POINT('',(0.34,-3.52308092439,0.7825));+#7910 = SURFACE_CURVE('',#7911,(#7915,#7922),.PCURVE_S1.);+#7911 = LINE('',#7912,#7913);+#7912 = CARTESIAN_POINT('',(0.16,-3.52308092439,0.7825));+#7913 = VECTOR('',#7914,1.);+#7914 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7915 = PCURVE('',#7868,#7916);+#7916 = DEFINITIONAL_REPRESENTATION('',(#7917),#7921);+#7917 = LINE('',#7918,#7919);+#7918 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#7919 = VECTOR('',#7920,1.);+#7920 = DIRECTION('',(0.,1.));+#7921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7922 = PCURVE('',#7923,#7928);+#7923 = CYLINDRICAL_SURFACE('',#7924,0.147);+#7924 = AXIS2_PLACEMENT_3D('',#7925,#7926,#7927);+#7925 = CARTESIAN_POINT('',(0.25,-3.52308092439,0.6355));+#7926 = DIRECTION('',(1.,1.110223024625E-16,0.));+#7927 = DIRECTION('',(0.,0.,1.));+#7928 = DEFINITIONAL_REPRESENTATION('',(#7929),#7933);+#7929 = LINE('',#7930,#7931);+#7930 = CARTESIAN_POINT('',(0.,-9.E-02));+#7931 = VECTOR('',#7932,1.);+#7932 = DIRECTION('',(-0.,1.));+#7933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7934 = ORIENTED_EDGE('',*,*,#7935,.F.);+#7935 = EDGE_CURVE('',#7754,#7908,#7936,.T.);+#7936 = SURFACE_CURVE('',#7937,(#7941,#7948),.PCURVE_S1.);+#7937 = LINE('',#7938,#7939);+#7938 = CARTESIAN_POINT('',(0.34,-3.25,0.7825));+#7939 = VECTOR('',#7940,1.);+#7940 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#7941 = PCURVE('',#7868,#7942);+#7942 = DEFINITIONAL_REPRESENTATION('',(#7943),#7947);+#7943 = LINE('',#7944,#7945);+#7944 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#7945 = VECTOR('',#7946,1.);+#7946 = DIRECTION('',(1.,0.));+#7947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7948 = PCURVE('',#7777,#7949);+#7949 = DEFINITIONAL_REPRESENTATION('',(#7950),#7954);+#7950 = LINE('',#7951,#7952);+#7951 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#7952 = VECTOR('',#7953,1.);+#7953 = DIRECTION('',(0.,1.));+#7954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7955 = ADVANCED_FACE('',(#7956),#7777,.T.);+#7956 = FACE_BOUND('',#7957,.T.);+#7957 = EDGE_LOOP('',(#7958,#7959,#7960,#7984,#8012,#8041,#8069,#8097,+ #8125,#8154,#8182,#8211,#8239,#8272));+#7958 = ORIENTED_EDGE('',*,*,#7753,.F.);+#7959 = ORIENTED_EDGE('',*,*,#7935,.T.);+#7960 = ORIENTED_EDGE('',*,*,#7961,.T.);+#7961 = EDGE_CURVE('',#7908,#7962,#7964,.T.);+#7962 = VERTEX_POINT('',#7963);+#7963 = CARTESIAN_POINT('',(0.34,-3.653021649751,0.704234328342));+#7964 = SURFACE_CURVE('',#7965,(#7970,#7977),.PCURVE_S1.);+#7965 = CIRCLE('',#7966,0.147);+#7966 = AXIS2_PLACEMENT_3D('',#7967,#7968,#7969);+#7967 = CARTESIAN_POINT('',(0.34,-3.52308092439,0.6355));+#7968 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#7969 = DIRECTION('',(0.,0.,1.));+#7970 = PCURVE('',#7777,#7971);+#7971 = DEFINITIONAL_REPRESENTATION('',(#7972),#7976);+#7972 = CIRCLE('',#7973,0.147);+#7973 = AXIS2_PLACEMENT_2D('',#7974,#7975);+#7974 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#7975 = DIRECTION('',(1.,0.));+#7976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7977 = PCURVE('',#7923,#7978);+#7978 = DEFINITIONAL_REPRESENTATION('',(#7979),#7983);+#7979 = LINE('',#7980,#7981);+#7980 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#7981 = VECTOR('',#7982,1.);+#7982 = DIRECTION('',(1.,-0.));+#7983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7984 = ORIENTED_EDGE('',*,*,#7985,.T.);+#7985 = EDGE_CURVE('',#7962,#7986,#7988,.T.);+#7986 = VERTEX_POINT('',#7987);+#7987 = CARTESIAN_POINT('',(0.34,-3.958168154079,0.127361620474));+#7988 = SURFACE_CURVE('',#7989,(#7993,#8000),.PCURVE_S1.);+#7989 = LINE('',#7990,#7991);+#7990 = CARTESIAN_POINT('',(0.34,-3.626407401915,0.754547974408));+#7991 = VECTOR('',#7992,1.);+#7992 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#7993 = PCURVE('',#7777,#7994);+#7994 = DEFINITIONAL_REPRESENTATION('',(#7995),#7999);+#7995 = LINE('',#7996,#7997);+#7996 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#7997 = VECTOR('',#7998,1.);+#7998 = DIRECTION('',(-0.883950512662,0.467580464908));+#7999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8000 = PCURVE('',#8001,#8006);+#8001 = PLANE('',#8002);+#8002 = AXIS2_PLACEMENT_3D('',#8003,#8004,#8005);+#8003 = CARTESIAN_POINT('',(0.25,-3.653021649751,0.704234328342));+#8004 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#8005 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#8006 = DEFINITIONAL_REPRESENTATION('',(#8007),#8011);+#8007 = LINE('',#8008,#8009);+#8008 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#8009 = VECTOR('',#8010,1.);+#8010 = DIRECTION('',(1.,-2.399596746007E-32));+#8011 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8012 = ORIENTED_EDGE('',*,*,#8013,.F.);+#8013 = EDGE_CURVE('',#8014,#7986,#8016,.T.);+#8014 = VERTEX_POINT('',#8015);+#8015 = CARTESIAN_POINT('',(0.34,-3.99529407561,0.105));+#8016 = SURFACE_CURVE('',#8017,(#8022,#8029),.PCURVE_S1.);+#8017 = CIRCLE('',#8018,4.2E-02);+#8018 = AXIS2_PLACEMENT_3D('',#8019,#8020,#8021);+#8019 = CARTESIAN_POINT('',(0.34,-3.99529407561,0.147));+#8020 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#8021 = DIRECTION('',(0.,0.,1.));+#8022 = PCURVE('',#7777,#8023);+#8023 = DEFINITIONAL_REPRESENTATION('',(#8024),#8028);+#8024 = CIRCLE('',#8025,4.2E-02);+#8025 = AXIS2_PLACEMENT_2D('',#8026,#8027);+#8026 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#8027 = DIRECTION('',(1.,0.));+#8028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8029 = PCURVE('',#8030,#8035);+#8030 = CYLINDRICAL_SURFACE('',#8031,4.2E-02);+#8031 = AXIS2_PLACEMENT_3D('',#8032,#8033,#8034);+#8032 = CARTESIAN_POINT('',(0.25,-3.99529407561,0.147));+#8033 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8034 = DIRECTION('',(0.,0.,1.));+#8035 = DEFINITIONAL_REPRESENTATION('',(#8036),#8040);+#8036 = LINE('',#8037,#8038);+#8037 = CARTESIAN_POINT('',(-0.,9.E-02));+#8038 = VECTOR('',#8039,1.);+#8039 = DIRECTION('',(1.,-0.));+#8040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8041 = ORIENTED_EDGE('',*,*,#8042,.T.);+#8042 = EDGE_CURVE('',#8014,#8043,#8045,.T.);+#8043 = VERTEX_POINT('',#8044);+#8044 = CARTESIAN_POINT('',(0.34,-4.43,0.105));+#8045 = SURFACE_CURVE('',#8046,(#8050,#8057),.PCURVE_S1.);+#8046 = LINE('',#8047,#8048);+#8047 = CARTESIAN_POINT('',(0.34,-3.938375,0.105));+#8048 = VECTOR('',#8049,1.);+#8049 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8050 = PCURVE('',#7777,#8051);+#8051 = DEFINITIONAL_REPRESENTATION('',(#8052),#8056);+#8052 = LINE('',#8053,#8054);+#8053 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#8054 = VECTOR('',#8055,1.);+#8055 = DIRECTION('',(0.,1.));+#8056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8057 = PCURVE('',#8058,#8063);+#8058 = PLANE('',#8059);+#8059 = AXIS2_PLACEMENT_3D('',#8060,#8061,#8062);+#8060 = CARTESIAN_POINT('',(0.25,-3.99529407561,0.105));+#8061 = DIRECTION('',(0.,0.,1.));+#8062 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8063 = DEFINITIONAL_REPRESENTATION('',(#8064),#8068);+#8064 = LINE('',#8065,#8066);+#8065 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#8066 = VECTOR('',#8067,1.);+#8067 = DIRECTION('',(1.,0.));+#8068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8069 = ORIENTED_EDGE('',*,*,#8070,.T.);+#8070 = EDGE_CURVE('',#8043,#8071,#8073,.T.);+#8071 = VERTEX_POINT('',#8072);+#8072 = CARTESIAN_POINT('',(0.34,-4.43,0.));+#8073 = SURFACE_CURVE('',#8074,(#8078,#8085),.PCURVE_S1.);+#8074 = LINE('',#8075,#8076);+#8075 = CARTESIAN_POINT('',(0.34,-4.43,-8.142959240193E-02));+#8076 = VECTOR('',#8077,1.);+#8077 = DIRECTION('',(0.,0.,-1.));+#8078 = PCURVE('',#7777,#8079);+#8079 = DEFINITIONAL_REPRESENTATION('',(#8080),#8084);+#8080 = LINE('',#8081,#8082);+#8081 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#8082 = VECTOR('',#8083,1.);+#8083 = DIRECTION('',(-1.,0.));+#8084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8085 = PCURVE('',#8086,#8091);+#8086 = PLANE('',#8087);+#8087 = AXIS2_PLACEMENT_3D('',#8088,#8089,#8090);+#8088 = CARTESIAN_POINT('',(-0.34,-4.43,-0.5));+#8089 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8090 = DIRECTION('',(0.,0.,1.));+#8091 = DEFINITIONAL_REPRESENTATION('',(#8092),#8096);+#8092 = LINE('',#8093,#8094);+#8093 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#8094 = VECTOR('',#8095,1.);+#8095 = DIRECTION('',(-1.,-0.));+#8096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8097 = ORIENTED_EDGE('',*,*,#8098,.F.);+#8098 = EDGE_CURVE('',#8099,#8071,#8101,.T.);+#8099 = VERTEX_POINT('',#8100);+#8100 = CARTESIAN_POINT('',(0.34,-3.99529407561,0.));+#8101 = SURFACE_CURVE('',#8102,(#8106,#8113),.PCURVE_S1.);+#8102 = LINE('',#8103,#8104);+#8103 = CARTESIAN_POINT('',(0.34,-3.938375,0.));+#8104 = VECTOR('',#8105,1.);+#8105 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8106 = PCURVE('',#7777,#8107);+#8107 = DEFINITIONAL_REPRESENTATION('',(#8108),#8112);+#8108 = LINE('',#8109,#8110);+#8109 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#8110 = VECTOR('',#8111,1.);+#8111 = DIRECTION('',(0.,1.));+#8112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8113 = PCURVE('',#8114,#8119);+#8114 = PLANE('',#8115);+#8115 = AXIS2_PLACEMENT_3D('',#8116,#8117,#8118);+#8116 = CARTESIAN_POINT('',(0.25,-3.99529407561,0.));+#8117 = DIRECTION('',(0.,0.,1.));+#8118 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8119 = DEFINITIONAL_REPRESENTATION('',(#8120),#8124);+#8120 = LINE('',#8121,#8122);+#8121 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#8122 = VECTOR('',#8123,1.);+#8123 = DIRECTION('',(1.,0.));+#8124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8125 = ORIENTED_EDGE('',*,*,#8126,.T.);+#8126 = EDGE_CURVE('',#8099,#8127,#8129,.T.);+#8127 = VERTEX_POINT('',#8128);+#8128 = CARTESIAN_POINT('',(0.34,-3.865353350249,7.826567165848E-02));+#8129 = SURFACE_CURVE('',#8130,(#8135,#8142),.PCURVE_S1.);+#8130 = CIRCLE('',#8131,0.147);+#8131 = AXIS2_PLACEMENT_3D('',#8132,#8133,#8134);+#8132 = CARTESIAN_POINT('',(0.34,-3.99529407561,0.147));+#8133 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#8134 = DIRECTION('',(0.,0.,1.));+#8135 = PCURVE('',#7777,#8136);+#8136 = DEFINITIONAL_REPRESENTATION('',(#8137),#8141);+#8137 = CIRCLE('',#8138,0.147);+#8138 = AXIS2_PLACEMENT_2D('',#8139,#8140);+#8139 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#8140 = DIRECTION('',(1.,0.));+#8141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8142 = PCURVE('',#8143,#8148);+#8143 = CYLINDRICAL_SURFACE('',#8144,0.147);+#8144 = AXIS2_PLACEMENT_3D('',#8145,#8146,#8147);+#8145 = CARTESIAN_POINT('',(0.25,-3.99529407561,0.147));+#8146 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8147 = DIRECTION('',(0.,0.,1.));+#8148 = DEFINITIONAL_REPRESENTATION('',(#8149),#8153);+#8149 = LINE('',#8150,#8151);+#8150 = CARTESIAN_POINT('',(-0.,9.E-02));+#8151 = VECTOR('',#8152,1.);+#8152 = DIRECTION('',(1.,-0.));+#8153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8154 = ORIENTED_EDGE('',*,*,#8155,.F.);+#8155 = EDGE_CURVE('',#8156,#8127,#8158,.T.);+#8156 = VERTEX_POINT('',#8157);+#8157 = CARTESIAN_POINT('',(0.34,-3.560206845921,0.655138379526));+#8158 = SURFACE_CURVE('',#8159,(#8163,#8170),.PCURVE_S1.);+#8159 = LINE('',#8160,#8161);+#8160 = CARTESIAN_POINT('',(0.34,-3.533592598085,0.705452025592));+#8161 = VECTOR('',#8162,1.);+#8162 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#8163 = PCURVE('',#7777,#8164);+#8164 = DEFINITIONAL_REPRESENTATION('',(#8165),#8169);+#8165 = LINE('',#8166,#8167);+#8166 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#8167 = VECTOR('',#8168,1.);+#8168 = DIRECTION('',(-0.883950512662,0.467580464908));+#8169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8170 = PCURVE('',#8171,#8176);+#8171 = PLANE('',#8172);+#8172 = AXIS2_PLACEMENT_3D('',#8173,#8174,#8175);+#8173 = CARTESIAN_POINT('',(0.25,-3.560206845921,0.655138379526));+#8174 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#8175 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#8176 = DEFINITIONAL_REPRESENTATION('',(#8177),#8181);+#8177 = LINE('',#8178,#8179);+#8178 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#8179 = VECTOR('',#8180,1.);+#8180 = DIRECTION('',(1.,-2.399596746007E-32));+#8181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8182 = ORIENTED_EDGE('',*,*,#8183,.F.);+#8183 = EDGE_CURVE('',#8184,#8156,#8186,.T.);+#8184 = VERTEX_POINT('',#8185);+#8185 = CARTESIAN_POINT('',(0.34,-3.52308092439,0.6775));+#8186 = SURFACE_CURVE('',#8187,(#8192,#8199),.PCURVE_S1.);+#8187 = CIRCLE('',#8188,4.2E-02);+#8188 = AXIS2_PLACEMENT_3D('',#8189,#8190,#8191);+#8189 = CARTESIAN_POINT('',(0.34,-3.52308092439,0.6355));+#8190 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#8191 = DIRECTION('',(0.,0.,1.));+#8192 = PCURVE('',#7777,#8193);+#8193 = DEFINITIONAL_REPRESENTATION('',(#8194),#8198);+#8194 = CIRCLE('',#8195,4.2E-02);+#8195 = AXIS2_PLACEMENT_2D('',#8196,#8197);+#8196 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#8197 = DIRECTION('',(1.,0.));+#8198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8199 = PCURVE('',#8200,#8205);+#8200 = CYLINDRICAL_SURFACE('',#8201,4.2E-02);+#8201 = AXIS2_PLACEMENT_3D('',#8202,#8203,#8204);+#8202 = CARTESIAN_POINT('',(0.25,-3.52308092439,0.6355));+#8203 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8204 = DIRECTION('',(0.,0.,1.));+#8205 = DEFINITIONAL_REPRESENTATION('',(#8206),#8210);+#8206 = LINE('',#8207,#8208);+#8207 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#8208 = VECTOR('',#8209,1.);+#8209 = DIRECTION('',(1.,-0.));+#8210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8211 = ORIENTED_EDGE('',*,*,#8212,.F.);+#8212 = EDGE_CURVE('',#8213,#8184,#8215,.T.);+#8213 = VERTEX_POINT('',#8214);+#8214 = CARTESIAN_POINT('',(0.34,-3.25,0.6775));+#8215 = SURFACE_CURVE('',#8216,(#8220,#8227),.PCURVE_S1.);+#8216 = LINE('',#8217,#8218);+#8217 = CARTESIAN_POINT('',(0.34,-3.25,0.6775));+#8218 = VECTOR('',#8219,1.);+#8219 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8220 = PCURVE('',#7777,#8221);+#8221 = DEFINITIONAL_REPRESENTATION('',(#8222),#8226);+#8222 = LINE('',#8223,#8224);+#8223 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#8224 = VECTOR('',#8225,1.);+#8225 = DIRECTION('',(0.,1.));+#8226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8227 = PCURVE('',#8228,#8233);+#8228 = PLANE('',#8229);+#8229 = AXIS2_PLACEMENT_3D('',#8230,#8231,#8232);+#8230 = CARTESIAN_POINT('',(0.25,-3.25,0.6775));+#8231 = DIRECTION('',(0.,0.,1.));+#8232 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8233 = DEFINITIONAL_REPRESENTATION('',(#8234),#8238);+#8234 = LINE('',#8235,#8236);+#8235 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#8236 = VECTOR('',#8237,1.);+#8237 = DIRECTION('',(1.,0.));+#8238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8239 = ORIENTED_EDGE('',*,*,#8240,.F.);+#8240 = EDGE_CURVE('',#8241,#8213,#8243,.T.);+#8241 = VERTEX_POINT('',#8242);+#8242 = CARTESIAN_POINT('',(0.34,-3.2,0.713992189406));+#8243 = SURFACE_CURVE('',#8244,(#8249,#8260),.PCURVE_S1.);+#8244 = CIRCLE('',#8245,5.25E-02);+#8245 = AXIS2_PLACEMENT_3D('',#8246,#8247,#8248);+#8246 = CARTESIAN_POINT('',(0.34,-3.25,0.73));+#8247 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8248 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8249 = PCURVE('',#7777,#8250);+#8250 = DEFINITIONAL_REPRESENTATION('',(#8251),#8259);+#8251 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8252,#8253,#8254,#8255,+#8256,#8257,#8258),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8252 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#8253 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#8254 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#8255 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#8256 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#8257 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#8258 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#8259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8260 = PCURVE('',#8261,#8266);+#8261 = CYLINDRICAL_SURFACE('',#8262,5.25E-02);+#8262 = AXIS2_PLACEMENT_3D('',#8263,#8264,#8265);+#8263 = CARTESIAN_POINT('',(0.25,-3.25,0.73));+#8264 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8265 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8266 = DEFINITIONAL_REPRESENTATION('',(#8267),#8271);+#8267 = LINE('',#8268,#8269);+#8268 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#8269 = VECTOR('',#8270,1.);+#8270 = DIRECTION('',(-1.,-0.));+#8271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8272 = ORIENTED_EDGE('',*,*,#8273,.F.);+#8273 = EDGE_CURVE('',#7756,#8241,#8274,.T.);+#8274 = SURFACE_CURVE('',#8275,(#8279,#8286),.PCURVE_S1.);+#8275 = LINE('',#8276,#8277);+#8276 = CARTESIAN_POINT('',(0.34,-3.2,-8.142959240193E-02));+#8277 = VECTOR('',#8278,1.);+#8278 = DIRECTION('',(0.,0.,-1.));+#8279 = PCURVE('',#7777,#8280);+#8280 = DEFINITIONAL_REPRESENTATION('',(#8281),#8285);+#8281 = LINE('',#8282,#8283);+#8282 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#8283 = VECTOR('',#8284,1.);+#8284 = DIRECTION('',(-1.,0.));+#8285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8286 = PCURVE('',#7809,#8287);+#8287 = DEFINITIONAL_REPRESENTATION('',(#8288),#8292);+#8288 = LINE('',#8289,#8290);+#8289 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#8290 = VECTOR('',#8291,1.);+#8291 = DIRECTION('',(-1.,-0.));+#8292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8293 = ADVANCED_FACE('',(#8294),#7809,.F.);+#8294 = FACE_BOUND('',#8295,.F.);+#8295 = EDGE_LOOP('',(#8296,#8297,#8320,#8341));+#8296 = ORIENTED_EDGE('',*,*,#7793,.F.);+#8297 = ORIENTED_EDGE('',*,*,#8298,.T.);+#8298 = EDGE_CURVE('',#7794,#8299,#8301,.T.);+#8299 = VERTEX_POINT('',#8300);+#8300 = CARTESIAN_POINT('',(0.16,-3.2,0.713992189406));+#8301 = SURFACE_CURVE('',#8302,(#8306,#8313),.PCURVE_S1.);+#8302 = LINE('',#8303,#8304);+#8303 = CARTESIAN_POINT('',(0.16,-3.2,-8.142959240193E-02));+#8304 = VECTOR('',#8305,1.);+#8305 = DIRECTION('',(0.,0.,-1.));+#8306 = PCURVE('',#7809,#8307);+#8307 = DEFINITIONAL_REPRESENTATION('',(#8308),#8312);+#8308 = LINE('',#8309,#8310);+#8309 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#8310 = VECTOR('',#8311,1.);+#8311 = DIRECTION('',(-1.,-0.));+#8312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8313 = PCURVE('',#7838,#8314);+#8314 = DEFINITIONAL_REPRESENTATION('',(#8315),#8319);+#8315 = LINE('',#8316,#8317);+#8316 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#8317 = VECTOR('',#8318,1.);+#8318 = DIRECTION('',(-1.,0.));+#8319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8320 = ORIENTED_EDGE('',*,*,#8321,.T.);+#8321 = EDGE_CURVE('',#8299,#8241,#8322,.T.);+#8322 = SURFACE_CURVE('',#8323,(#8327,#8334),.PCURVE_S1.);+#8323 = LINE('',#8324,#8325);+#8324 = CARTESIAN_POINT('',(0.25,-3.2,0.713992189406));+#8325 = VECTOR('',#8326,1.);+#8326 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8327 = PCURVE('',#7809,#8328);+#8328 = DEFINITIONAL_REPRESENTATION('',(#8329),#8333);+#8329 = LINE('',#8330,#8331);+#8330 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#8331 = VECTOR('',#8332,1.);+#8332 = DIRECTION('',(0.,-1.));+#8333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8334 = PCURVE('',#8261,#8335);+#8335 = DEFINITIONAL_REPRESENTATION('',(#8336),#8340);+#8336 = LINE('',#8337,#8338);+#8337 = CARTESIAN_POINT('',(2.831748013849,0.));+#8338 = VECTOR('',#8339,1.);+#8339 = DIRECTION('',(-0.,1.));+#8340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8341 = ORIENTED_EDGE('',*,*,#8273,.F.);+#8342 = ADVANCED_FACE('',(#8343),#7838,.F.);+#8343 = FACE_BOUND('',#8344,.F.);+#8344 = EDGE_LOOP('',(#8345,#8346,#8347,#8371,#8394,#8418,#8441,#8464,+ #8487,#8511,#8534,#8558,#8581,#8607));+#8345 = ORIENTED_EDGE('',*,*,#7821,.F.);+#8346 = ORIENTED_EDGE('',*,*,#7884,.T.);+#8347 = ORIENTED_EDGE('',*,*,#8348,.T.);+#8348 = EDGE_CURVE('',#7885,#8349,#8351,.T.);+#8349 = VERTEX_POINT('',#8350);+#8350 = CARTESIAN_POINT('',(0.16,-3.653021649751,0.704234328342));+#8351 = SURFACE_CURVE('',#8352,(#8357,#8364),.PCURVE_S1.);+#8352 = CIRCLE('',#8353,0.147);+#8353 = AXIS2_PLACEMENT_3D('',#8354,#8355,#8356);+#8354 = CARTESIAN_POINT('',(0.16,-3.52308092439,0.6355));+#8355 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#8356 = DIRECTION('',(0.,0.,1.));+#8357 = PCURVE('',#7838,#8358);+#8358 = DEFINITIONAL_REPRESENTATION('',(#8359),#8363);+#8359 = CIRCLE('',#8360,0.147);+#8360 = AXIS2_PLACEMENT_2D('',#8361,#8362);+#8361 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#8362 = DIRECTION('',(1.,0.));+#8363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8364 = PCURVE('',#7923,#8365);+#8365 = DEFINITIONAL_REPRESENTATION('',(#8366),#8370);+#8366 = LINE('',#8367,#8368);+#8367 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#8368 = VECTOR('',#8369,1.);+#8369 = DIRECTION('',(1.,0.));+#8370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8371 = ORIENTED_EDGE('',*,*,#8372,.T.);+#8372 = EDGE_CURVE('',#8349,#8373,#8375,.T.);+#8373 = VERTEX_POINT('',#8374);+#8374 = CARTESIAN_POINT('',(0.16,-3.958168154079,0.127361620474));+#8375 = SURFACE_CURVE('',#8376,(#8380,#8387),.PCURVE_S1.);+#8376 = LINE('',#8377,#8378);+#8377 = CARTESIAN_POINT('',(0.16,-3.626407401915,0.754547974408));+#8378 = VECTOR('',#8379,1.);+#8379 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#8380 = PCURVE('',#7838,#8381);+#8381 = DEFINITIONAL_REPRESENTATION('',(#8382),#8386);+#8382 = LINE('',#8383,#8384);+#8383 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#8384 = VECTOR('',#8385,1.);+#8385 = DIRECTION('',(-0.883950512662,0.467580464908));+#8386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8387 = PCURVE('',#8001,#8388);+#8388 = DEFINITIONAL_REPRESENTATION('',(#8389),#8393);+#8389 = LINE('',#8390,#8391);+#8390 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#8391 = VECTOR('',#8392,1.);+#8392 = DIRECTION('',(1.,-2.399596746007E-32));+#8393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8394 = ORIENTED_EDGE('',*,*,#8395,.F.);+#8395 = EDGE_CURVE('',#8396,#8373,#8398,.T.);+#8396 = VERTEX_POINT('',#8397);+#8397 = CARTESIAN_POINT('',(0.16,-3.99529407561,0.105));+#8398 = SURFACE_CURVE('',#8399,(#8404,#8411),.PCURVE_S1.);+#8399 = CIRCLE('',#8400,4.2E-02);+#8400 = AXIS2_PLACEMENT_3D('',#8401,#8402,#8403);+#8401 = CARTESIAN_POINT('',(0.16,-3.99529407561,0.147));+#8402 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#8403 = DIRECTION('',(0.,0.,1.));+#8404 = PCURVE('',#7838,#8405);+#8405 = DEFINITIONAL_REPRESENTATION('',(#8406),#8410);+#8406 = CIRCLE('',#8407,4.2E-02);+#8407 = AXIS2_PLACEMENT_2D('',#8408,#8409);+#8408 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#8409 = DIRECTION('',(1.,0.));+#8410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8411 = PCURVE('',#8030,#8412);+#8412 = DEFINITIONAL_REPRESENTATION('',(#8413),#8417);+#8413 = LINE('',#8414,#8415);+#8414 = CARTESIAN_POINT('',(0.,-9.E-02));+#8415 = VECTOR('',#8416,1.);+#8416 = DIRECTION('',(1.,0.));+#8417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8418 = ORIENTED_EDGE('',*,*,#8419,.T.);+#8419 = EDGE_CURVE('',#8396,#8420,#8422,.T.);+#8420 = VERTEX_POINT('',#8421);+#8421 = CARTESIAN_POINT('',(0.16,-4.43,0.105));+#8422 = SURFACE_CURVE('',#8423,(#8427,#8434),.PCURVE_S1.);+#8423 = LINE('',#8424,#8425);+#8424 = CARTESIAN_POINT('',(0.16,-3.938375,0.105));+#8425 = VECTOR('',#8426,1.);+#8426 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8427 = PCURVE('',#7838,#8428);+#8428 = DEFINITIONAL_REPRESENTATION('',(#8429),#8433);+#8429 = LINE('',#8430,#8431);+#8430 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#8431 = VECTOR('',#8432,1.);+#8432 = DIRECTION('',(0.,1.));+#8433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8434 = PCURVE('',#8058,#8435);+#8435 = DEFINITIONAL_REPRESENTATION('',(#8436),#8440);+#8436 = LINE('',#8437,#8438);+#8437 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#8438 = VECTOR('',#8439,1.);+#8439 = DIRECTION('',(1.,0.));+#8440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8441 = ORIENTED_EDGE('',*,*,#8442,.T.);+#8442 = EDGE_CURVE('',#8420,#8443,#8445,.T.);+#8443 = VERTEX_POINT('',#8444);+#8444 = CARTESIAN_POINT('',(0.16,-4.43,0.));+#8445 = SURFACE_CURVE('',#8446,(#8450,#8457),.PCURVE_S1.);+#8446 = LINE('',#8447,#8448);+#8447 = CARTESIAN_POINT('',(0.16,-4.43,-8.142959240193E-02));+#8448 = VECTOR('',#8449,1.);+#8449 = DIRECTION('',(0.,0.,-1.));+#8450 = PCURVE('',#7838,#8451);+#8451 = DEFINITIONAL_REPRESENTATION('',(#8452),#8456);+#8452 = LINE('',#8453,#8454);+#8453 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#8454 = VECTOR('',#8455,1.);+#8455 = DIRECTION('',(-1.,0.));+#8456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8457 = PCURVE('',#8086,#8458);+#8458 = DEFINITIONAL_REPRESENTATION('',(#8459),#8463);+#8459 = LINE('',#8460,#8461);+#8460 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#8461 = VECTOR('',#8462,1.);+#8462 = DIRECTION('',(-1.,-0.));+#8463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8464 = ORIENTED_EDGE('',*,*,#8465,.F.);+#8465 = EDGE_CURVE('',#8466,#8443,#8468,.T.);+#8466 = VERTEX_POINT('',#8467);+#8467 = CARTESIAN_POINT('',(0.16,-3.99529407561,0.));+#8468 = SURFACE_CURVE('',#8469,(#8473,#8480),.PCURVE_S1.);+#8469 = LINE('',#8470,#8471);+#8470 = CARTESIAN_POINT('',(0.16,-3.938375,0.));+#8471 = VECTOR('',#8472,1.);+#8472 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8473 = PCURVE('',#7838,#8474);+#8474 = DEFINITIONAL_REPRESENTATION('',(#8475),#8479);+#8475 = LINE('',#8476,#8477);+#8476 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#8477 = VECTOR('',#8478,1.);+#8478 = DIRECTION('',(0.,1.));+#8479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8480 = PCURVE('',#8114,#8481);+#8481 = DEFINITIONAL_REPRESENTATION('',(#8482),#8486);+#8482 = LINE('',#8483,#8484);+#8483 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#8484 = VECTOR('',#8485,1.);+#8485 = DIRECTION('',(1.,0.));+#8486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8487 = ORIENTED_EDGE('',*,*,#8488,.T.);+#8488 = EDGE_CURVE('',#8466,#8489,#8491,.T.);+#8489 = VERTEX_POINT('',#8490);+#8490 = CARTESIAN_POINT('',(0.16,-3.865353350249,7.826567165848E-02));+#8491 = SURFACE_CURVE('',#8492,(#8497,#8504),.PCURVE_S1.);+#8492 = CIRCLE('',#8493,0.147);+#8493 = AXIS2_PLACEMENT_3D('',#8494,#8495,#8496);+#8494 = CARTESIAN_POINT('',(0.16,-3.99529407561,0.147));+#8495 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#8496 = DIRECTION('',(0.,0.,1.));+#8497 = PCURVE('',#7838,#8498);+#8498 = DEFINITIONAL_REPRESENTATION('',(#8499),#8503);+#8499 = CIRCLE('',#8500,0.147);+#8500 = AXIS2_PLACEMENT_2D('',#8501,#8502);+#8501 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#8502 = DIRECTION('',(1.,0.));+#8503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8504 = PCURVE('',#8143,#8505);+#8505 = DEFINITIONAL_REPRESENTATION('',(#8506),#8510);+#8506 = LINE('',#8507,#8508);+#8507 = CARTESIAN_POINT('',(0.,-9.E-02));+#8508 = VECTOR('',#8509,1.);+#8509 = DIRECTION('',(1.,0.));+#8510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8511 = ORIENTED_EDGE('',*,*,#8512,.F.);+#8512 = EDGE_CURVE('',#8513,#8489,#8515,.T.);+#8513 = VERTEX_POINT('',#8514);+#8514 = CARTESIAN_POINT('',(0.16,-3.560206845921,0.655138379526));+#8515 = SURFACE_CURVE('',#8516,(#8520,#8527),.PCURVE_S1.);+#8516 = LINE('',#8517,#8518);+#8517 = CARTESIAN_POINT('',(0.16,-3.533592598085,0.705452025592));+#8518 = VECTOR('',#8519,1.);+#8519 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#8520 = PCURVE('',#7838,#8521);+#8521 = DEFINITIONAL_REPRESENTATION('',(#8522),#8526);+#8522 = LINE('',#8523,#8524);+#8523 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#8524 = VECTOR('',#8525,1.);+#8525 = DIRECTION('',(-0.883950512662,0.467580464908));+#8526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8527 = PCURVE('',#8171,#8528);+#8528 = DEFINITIONAL_REPRESENTATION('',(#8529),#8533);+#8529 = LINE('',#8530,#8531);+#8530 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#8531 = VECTOR('',#8532,1.);+#8532 = DIRECTION('',(1.,-2.399596746007E-32));+#8533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8534 = ORIENTED_EDGE('',*,*,#8535,.F.);+#8535 = EDGE_CURVE('',#8536,#8513,#8538,.T.);+#8536 = VERTEX_POINT('',#8537);+#8537 = CARTESIAN_POINT('',(0.16,-3.52308092439,0.6775));+#8538 = SURFACE_CURVE('',#8539,(#8544,#8551),.PCURVE_S1.);+#8539 = CIRCLE('',#8540,4.2E-02);+#8540 = AXIS2_PLACEMENT_3D('',#8541,#8542,#8543);+#8541 = CARTESIAN_POINT('',(0.16,-3.52308092439,0.6355));+#8542 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#8543 = DIRECTION('',(0.,0.,1.));+#8544 = PCURVE('',#7838,#8545);+#8545 = DEFINITIONAL_REPRESENTATION('',(#8546),#8550);+#8546 = CIRCLE('',#8547,4.2E-02);+#8547 = AXIS2_PLACEMENT_2D('',#8548,#8549);+#8548 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#8549 = DIRECTION('',(1.,0.));+#8550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8551 = PCURVE('',#8200,#8552);+#8552 = DEFINITIONAL_REPRESENTATION('',(#8553),#8557);+#8553 = LINE('',#8554,#8555);+#8554 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#8555 = VECTOR('',#8556,1.);+#8556 = DIRECTION('',(1.,0.));+#8557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8558 = ORIENTED_EDGE('',*,*,#8559,.F.);+#8559 = EDGE_CURVE('',#8560,#8536,#8562,.T.);+#8560 = VERTEX_POINT('',#8561);+#8561 = CARTESIAN_POINT('',(0.16,-3.25,0.6775));+#8562 = SURFACE_CURVE('',#8563,(#8567,#8574),.PCURVE_S1.);+#8563 = LINE('',#8564,#8565);+#8564 = CARTESIAN_POINT('',(0.16,-3.25,0.6775));+#8565 = VECTOR('',#8566,1.);+#8566 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8567 = PCURVE('',#7838,#8568);+#8568 = DEFINITIONAL_REPRESENTATION('',(#8569),#8573);+#8569 = LINE('',#8570,#8571);+#8570 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#8571 = VECTOR('',#8572,1.);+#8572 = DIRECTION('',(0.,1.));+#8573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8574 = PCURVE('',#8228,#8575);+#8575 = DEFINITIONAL_REPRESENTATION('',(#8576),#8580);+#8576 = LINE('',#8577,#8578);+#8577 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#8578 = VECTOR('',#8579,1.);+#8579 = DIRECTION('',(1.,0.));+#8580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8581 = ORIENTED_EDGE('',*,*,#8582,.F.);+#8582 = EDGE_CURVE('',#8299,#8560,#8583,.T.);+#8583 = SURFACE_CURVE('',#8584,(#8589,#8600),.PCURVE_S1.);+#8584 = CIRCLE('',#8585,5.25E-02);+#8585 = AXIS2_PLACEMENT_3D('',#8586,#8587,#8588);+#8586 = CARTESIAN_POINT('',(0.16,-3.25,0.73));+#8587 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8588 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8589 = PCURVE('',#7838,#8590);+#8590 = DEFINITIONAL_REPRESENTATION('',(#8591),#8599);+#8591 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8592,#8593,#8594,#8595,+#8596,#8597,#8598),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8592 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#8593 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#8594 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#8595 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#8596 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#8597 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#8598 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#8599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8600 = PCURVE('',#8261,#8601);+#8601 = DEFINITIONAL_REPRESENTATION('',(#8602),#8606);+#8602 = LINE('',#8603,#8604);+#8603 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#8604 = VECTOR('',#8605,1.);+#8605 = DIRECTION('',(-1.,0.));+#8606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8607 = ORIENTED_EDGE('',*,*,#8298,.F.);+#8608 = ADVANCED_FACE('',(#8609),#7923,.T.);+#8609 = FACE_BOUND('',#8610,.T.);+#8610 = EDGE_LOOP('',(#8611,#8612,#8613,#8634));+#8611 = ORIENTED_EDGE('',*,*,#7907,.F.);+#8612 = ORIENTED_EDGE('',*,*,#8348,.T.);+#8613 = ORIENTED_EDGE('',*,*,#8614,.T.);+#8614 = EDGE_CURVE('',#8349,#7962,#8615,.T.);+#8615 = SURFACE_CURVE('',#8616,(#8620,#8627),.PCURVE_S1.);+#8616 = LINE('',#8617,#8618);+#8617 = CARTESIAN_POINT('',(0.16,-3.653021649751,0.704234328342));+#8618 = VECTOR('',#8619,1.);+#8619 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8620 = PCURVE('',#7923,#8621);+#8621 = DEFINITIONAL_REPRESENTATION('',(#8622),#8626);+#8622 = LINE('',#8623,#8624);+#8623 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#8624 = VECTOR('',#8625,1.);+#8625 = DIRECTION('',(-0.,1.));+#8626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8627 = PCURVE('',#8001,#8628);+#8628 = DEFINITIONAL_REPRESENTATION('',(#8629),#8633);+#8629 = LINE('',#8630,#8631);+#8630 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#8631 = VECTOR('',#8632,1.);+#8632 = DIRECTION('',(4.767113258106E-29,1.));+#8633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8634 = ORIENTED_EDGE('',*,*,#7961,.F.);+#8635 = ADVANCED_FACE('',(#8636),#8261,.T.);+#8636 = FACE_BOUND('',#8637,.T.);+#8637 = EDGE_LOOP('',(#8638,#8639,#8660,#8661));+#8638 = ORIENTED_EDGE('',*,*,#8240,.T.);+#8639 = ORIENTED_EDGE('',*,*,#8640,.T.);+#8640 = EDGE_CURVE('',#8213,#8560,#8641,.T.);+#8641 = SURFACE_CURVE('',#8642,(#8646,#8653),.PCURVE_S1.);+#8642 = LINE('',#8643,#8644);+#8643 = CARTESIAN_POINT('',(0.34,-3.25,0.6775));+#8644 = VECTOR('',#8645,1.);+#8645 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8646 = PCURVE('',#8261,#8647);+#8647 = DEFINITIONAL_REPRESENTATION('',(#8648),#8652);+#8648 = LINE('',#8649,#8650);+#8649 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#8650 = VECTOR('',#8651,1.);+#8651 = DIRECTION('',(-0.,-1.));+#8652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8653 = PCURVE('',#8228,#8654);+#8654 = DEFINITIONAL_REPRESENTATION('',(#8655),#8659);+#8655 = LINE('',#8656,#8657);+#8656 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#8657 = VECTOR('',#8658,1.);+#8658 = DIRECTION('',(0.,-1.));+#8659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8660 = ORIENTED_EDGE('',*,*,#8582,.F.);+#8661 = ORIENTED_EDGE('',*,*,#8321,.T.);+#8662 = ADVANCED_FACE('',(#8663),#8228,.F.);+#8663 = FACE_BOUND('',#8664,.F.);+#8664 = EDGE_LOOP('',(#8665,#8666,#8687,#8688));+#8665 = ORIENTED_EDGE('',*,*,#8559,.T.);+#8666 = ORIENTED_EDGE('',*,*,#8667,.F.);+#8667 = EDGE_CURVE('',#8184,#8536,#8668,.T.);+#8668 = SURFACE_CURVE('',#8669,(#8673,#8680),.PCURVE_S1.);+#8669 = LINE('',#8670,#8671);+#8670 = CARTESIAN_POINT('',(0.34,-3.52308092439,0.6775));+#8671 = VECTOR('',#8672,1.);+#8672 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8673 = PCURVE('',#8228,#8674);+#8674 = DEFINITIONAL_REPRESENTATION('',(#8675),#8679);+#8675 = LINE('',#8676,#8677);+#8676 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#8677 = VECTOR('',#8678,1.);+#8678 = DIRECTION('',(0.,-1.));+#8679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8680 = PCURVE('',#8200,#8681);+#8681 = DEFINITIONAL_REPRESENTATION('',(#8682),#8686);+#8682 = LINE('',#8683,#8684);+#8683 = CARTESIAN_POINT('',(0.,9.E-02));+#8684 = VECTOR('',#8685,1.);+#8685 = DIRECTION('',(0.,-1.));+#8686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8687 = ORIENTED_EDGE('',*,*,#8212,.F.);+#8688 = ORIENTED_EDGE('',*,*,#8640,.T.);+#8689 = ADVANCED_FACE('',(#8690),#8200,.F.);+#8690 = FACE_BOUND('',#8691,.F.);+#8691 = EDGE_LOOP('',(#8692,#8693,#8714,#8715));+#8692 = ORIENTED_EDGE('',*,*,#8535,.T.);+#8693 = ORIENTED_EDGE('',*,*,#8694,.F.);+#8694 = EDGE_CURVE('',#8156,#8513,#8695,.T.);+#8695 = SURFACE_CURVE('',#8696,(#8700,#8707),.PCURVE_S1.);+#8696 = LINE('',#8697,#8698);+#8697 = CARTESIAN_POINT('',(0.34,-3.560206845921,0.655138379526));+#8698 = VECTOR('',#8699,1.);+#8699 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8700 = PCURVE('',#8200,#8701);+#8701 = DEFINITIONAL_REPRESENTATION('',(#8702),#8706);+#8702 = LINE('',#8703,#8704);+#8703 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#8704 = VECTOR('',#8705,1.);+#8705 = DIRECTION('',(0.,-1.));+#8706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8707 = PCURVE('',#8171,#8708);+#8708 = DEFINITIONAL_REPRESENTATION('',(#8709),#8713);+#8709 = LINE('',#8710,#8711);+#8710 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#8711 = VECTOR('',#8712,1.);+#8712 = DIRECTION('',(-4.767113258106E-29,-1.));+#8713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8714 = ORIENTED_EDGE('',*,*,#8183,.F.);+#8715 = ORIENTED_EDGE('',*,*,#8667,.T.);+#8716 = ADVANCED_FACE('',(#8717),#8171,.F.);+#8717 = FACE_BOUND('',#8718,.F.);+#8718 = EDGE_LOOP('',(#8719,#8720,#8741,#8742));+#8719 = ORIENTED_EDGE('',*,*,#8512,.T.);+#8720 = ORIENTED_EDGE('',*,*,#8721,.F.);+#8721 = EDGE_CURVE('',#8127,#8489,#8722,.T.);+#8722 = SURFACE_CURVE('',#8723,(#8727,#8734),.PCURVE_S1.);+#8723 = LINE('',#8724,#8725);+#8724 = CARTESIAN_POINT('',(0.34,-3.865353350249,7.826567165848E-02));+#8725 = VECTOR('',#8726,1.);+#8726 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8727 = PCURVE('',#8171,#8728);+#8728 = DEFINITIONAL_REPRESENTATION('',(#8729),#8733);+#8729 = LINE('',#8730,#8731);+#8730 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#8731 = VECTOR('',#8732,1.);+#8732 = DIRECTION('',(-4.767113258106E-29,-1.));+#8733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8734 = PCURVE('',#8143,#8735);+#8735 = DEFINITIONAL_REPRESENTATION('',(#8736),#8740);+#8736 = LINE('',#8737,#8738);+#8737 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#8738 = VECTOR('',#8739,1.);+#8739 = DIRECTION('',(0.,-1.));+#8740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8741 = ORIENTED_EDGE('',*,*,#8155,.F.);+#8742 = ORIENTED_EDGE('',*,*,#8694,.T.);+#8743 = ADVANCED_FACE('',(#8744),#8143,.T.);+#8744 = FACE_BOUND('',#8745,.T.);+#8745 = EDGE_LOOP('',(#8746,#8747,#8748,#8749));+#8746 = ORIENTED_EDGE('',*,*,#8488,.T.);+#8747 = ORIENTED_EDGE('',*,*,#8721,.F.);+#8748 = ORIENTED_EDGE('',*,*,#8126,.F.);+#8749 = ORIENTED_EDGE('',*,*,#8750,.T.);+#8750 = EDGE_CURVE('',#8099,#8466,#8751,.T.);+#8751 = SURFACE_CURVE('',#8752,(#8756,#8763),.PCURVE_S1.);+#8752 = LINE('',#8753,#8754);+#8753 = CARTESIAN_POINT('',(0.34,-3.99529407561,0.));+#8754 = VECTOR('',#8755,1.);+#8755 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8756 = PCURVE('',#8143,#8757);+#8757 = DEFINITIONAL_REPRESENTATION('',(#8758),#8762);+#8758 = LINE('',#8759,#8760);+#8759 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#8760 = VECTOR('',#8761,1.);+#8761 = DIRECTION('',(0.,-1.));+#8762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8763 = PCURVE('',#8114,#8764);+#8764 = DEFINITIONAL_REPRESENTATION('',(#8765),#8769);+#8765 = LINE('',#8766,#8767);+#8766 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#8767 = VECTOR('',#8768,1.);+#8768 = DIRECTION('',(0.,-1.));+#8769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8770 = ADVANCED_FACE('',(#8771),#8114,.F.);+#8771 = FACE_BOUND('',#8772,.F.);+#8772 = EDGE_LOOP('',(#8773,#8774,#8775,#8796));+#8773 = ORIENTED_EDGE('',*,*,#8750,.T.);+#8774 = ORIENTED_EDGE('',*,*,#8465,.T.);+#8775 = ORIENTED_EDGE('',*,*,#8776,.T.);+#8776 = EDGE_CURVE('',#8443,#8071,#8777,.T.);+#8777 = SURFACE_CURVE('',#8778,(#8782,#8789),.PCURVE_S1.);+#8778 = LINE('',#8779,#8780);+#8779 = CARTESIAN_POINT('',(-4.5E-02,-4.43,0.));+#8780 = VECTOR('',#8781,1.);+#8781 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8782 = PCURVE('',#8114,#8783);+#8783 = DEFINITIONAL_REPRESENTATION('',(#8784),#8788);+#8784 = LINE('',#8785,#8786);+#8785 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#8786 = VECTOR('',#8787,1.);+#8787 = DIRECTION('',(0.,1.));+#8788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8789 = PCURVE('',#8086,#8790);+#8790 = DEFINITIONAL_REPRESENTATION('',(#8791),#8795);+#8791 = LINE('',#8792,#8793);+#8792 = CARTESIAN_POINT('',(0.5,-0.295));+#8793 = VECTOR('',#8794,1.);+#8794 = DIRECTION('',(0.,-1.));+#8795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8796 = ORIENTED_EDGE('',*,*,#8098,.F.);+#8797 = ADVANCED_FACE('',(#8798),#8086,.T.);+#8798 = FACE_BOUND('',#8799,.T.);+#8799 = EDGE_LOOP('',(#8800,#8801,#8822,#8823));+#8800 = ORIENTED_EDGE('',*,*,#8070,.F.);+#8801 = ORIENTED_EDGE('',*,*,#8802,.F.);+#8802 = EDGE_CURVE('',#8420,#8043,#8803,.T.);+#8803 = SURFACE_CURVE('',#8804,(#8808,#8815),.PCURVE_S1.);+#8804 = LINE('',#8805,#8806);+#8805 = CARTESIAN_POINT('',(-4.5E-02,-4.43,0.105));+#8806 = VECTOR('',#8807,1.);+#8807 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8808 = PCURVE('',#8086,#8809);+#8809 = DEFINITIONAL_REPRESENTATION('',(#8810),#8814);+#8810 = LINE('',#8811,#8812);+#8811 = CARTESIAN_POINT('',(0.605,-0.295));+#8812 = VECTOR('',#8813,1.);+#8813 = DIRECTION('',(0.,-1.));+#8814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8815 = PCURVE('',#8058,#8816);+#8816 = DEFINITIONAL_REPRESENTATION('',(#8817),#8821);+#8817 = LINE('',#8818,#8819);+#8818 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#8819 = VECTOR('',#8820,1.);+#8820 = DIRECTION('',(0.,1.));+#8821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8822 = ORIENTED_EDGE('',*,*,#8442,.T.);+#8823 = ORIENTED_EDGE('',*,*,#8776,.T.);+#8824 = ADVANCED_FACE('',(#8825),#8058,.T.);+#8825 = FACE_BOUND('',#8826,.T.);+#8826 = EDGE_LOOP('',(#8827,#8848,#8849,#8850));+#8827 = ORIENTED_EDGE('',*,*,#8828,.T.);+#8828 = EDGE_CURVE('',#8014,#8396,#8829,.T.);+#8829 = SURFACE_CURVE('',#8830,(#8834,#8841),.PCURVE_S1.);+#8830 = LINE('',#8831,#8832);+#8831 = CARTESIAN_POINT('',(0.34,-3.99529407561,0.105));+#8832 = VECTOR('',#8833,1.);+#8833 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8834 = PCURVE('',#8058,#8835);+#8835 = DEFINITIONAL_REPRESENTATION('',(#8836),#8840);+#8836 = LINE('',#8837,#8838);+#8837 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#8838 = VECTOR('',#8839,1.);+#8839 = DIRECTION('',(0.,-1.));+#8840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8841 = PCURVE('',#8030,#8842);+#8842 = DEFINITIONAL_REPRESENTATION('',(#8843),#8847);+#8843 = LINE('',#8844,#8845);+#8844 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#8845 = VECTOR('',#8846,1.);+#8846 = DIRECTION('',(0.,-1.));+#8847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8848 = ORIENTED_EDGE('',*,*,#8419,.T.);+#8849 = ORIENTED_EDGE('',*,*,#8802,.T.);+#8850 = ORIENTED_EDGE('',*,*,#8042,.F.);+#8851 = ADVANCED_FACE('',(#8852),#8030,.F.);+#8852 = FACE_BOUND('',#8853,.F.);+#8853 = EDGE_LOOP('',(#8854,#8855,#8876,#8877));+#8854 = ORIENTED_EDGE('',*,*,#8395,.T.);+#8855 = ORIENTED_EDGE('',*,*,#8856,.F.);+#8856 = EDGE_CURVE('',#7986,#8373,#8857,.T.);+#8857 = SURFACE_CURVE('',#8858,(#8862,#8869),.PCURVE_S1.);+#8858 = LINE('',#8859,#8860);+#8859 = CARTESIAN_POINT('',(0.34,-3.958168154079,0.127361620474));+#8860 = VECTOR('',#8861,1.);+#8861 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8862 = PCURVE('',#8030,#8863);+#8863 = DEFINITIONAL_REPRESENTATION('',(#8864),#8868);+#8864 = LINE('',#8865,#8866);+#8865 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#8866 = VECTOR('',#8867,1.);+#8867 = DIRECTION('',(0.,-1.));+#8868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8869 = PCURVE('',#8001,#8870);+#8870 = DEFINITIONAL_REPRESENTATION('',(#8871),#8875);+#8871 = LINE('',#8872,#8873);+#8872 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#8873 = VECTOR('',#8874,1.);+#8874 = DIRECTION('',(-4.767113258106E-29,-1.));+#8875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8876 = ORIENTED_EDGE('',*,*,#8013,.F.);+#8877 = ORIENTED_EDGE('',*,*,#8828,.T.);+#8878 = ADVANCED_FACE('',(#8879),#8001,.T.);+#8879 = FACE_BOUND('',#8880,.T.);+#8880 = EDGE_LOOP('',(#8881,#8882,#8883,#8884));+#8881 = ORIENTED_EDGE('',*,*,#8614,.F.);+#8882 = ORIENTED_EDGE('',*,*,#8372,.T.);+#8883 = ORIENTED_EDGE('',*,*,#8856,.F.);+#8884 = ORIENTED_EDGE('',*,*,#7985,.F.);+#8885 = MANIFOLD_SOLID_BREP('',#8886);+#8886 = CLOSED_SHELL('',(#8887,#9017,#9093,#9431,#9480,#9746,#9773,#9800+ ,#9827,#9854,#9881,#9908,#9935,#9962,#9989,#10016));+#8887 = ADVANCED_FACE('',(#8888),#8903,.T.);+#8888 = FACE_BOUND('',#8889,.T.);+#8889 = EDGE_LOOP('',(#8890,#8930,#8958,#8991));+#8890 = ORIENTED_EDGE('',*,*,#8891,.T.);+#8891 = EDGE_CURVE('',#8892,#8894,#8896,.T.);+#8892 = VERTEX_POINT('',#8893);+#8893 = CARTESIAN_POINT('',(0.84,-3.25,0.7825));+#8894 = VERTEX_POINT('',#8895);+#8895 = CARTESIAN_POINT('',(0.84,-3.2,0.746007810594));+#8896 = SURFACE_CURVE('',#8897,(#8902,#8914),.PCURVE_S1.);+#8897 = CIRCLE('',#8898,5.25E-02);+#8898 = AXIS2_PLACEMENT_3D('',#8899,#8900,#8901);+#8899 = CARTESIAN_POINT('',(0.84,-3.25,0.73));+#8900 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8901 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8902 = PCURVE('',#8903,#8908);+#8903 = CYLINDRICAL_SURFACE('',#8904,5.25E-02);+#8904 = AXIS2_PLACEMENT_3D('',#8905,#8906,#8907);+#8905 = CARTESIAN_POINT('',(0.75,-3.25,0.73));+#8906 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8907 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8908 = DEFINITIONAL_REPRESENTATION('',(#8909),#8913);+#8909 = LINE('',#8910,#8911);+#8910 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#8911 = VECTOR('',#8912,1.);+#8912 = DIRECTION('',(-1.,-0.));+#8913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8914 = PCURVE('',#8915,#8920);+#8915 = PLANE('',#8916);+#8916 = AXIS2_PLACEMENT_3D('',#8917,#8918,#8919);+#8917 = CARTESIAN_POINT('',(0.84,-3.861815252728,0.337140815196));+#8918 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8919 = DIRECTION('',(0.,0.,1.));+#8920 = DEFINITIONAL_REPRESENTATION('',(#8921),#8929);+#8921 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8922,#8923,#8924,#8925,+#8926,#8927,#8928),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8922 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#8923 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#8924 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#8925 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#8926 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#8927 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#8928 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#8929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8930 = ORIENTED_EDGE('',*,*,#8931,.F.);+#8931 = EDGE_CURVE('',#8932,#8894,#8934,.T.);+#8932 = VERTEX_POINT('',#8933);+#8933 = CARTESIAN_POINT('',(0.66,-3.2,0.746007810594));+#8934 = SURFACE_CURVE('',#8935,(#8939,#8946),.PCURVE_S1.);+#8935 = LINE('',#8936,#8937);+#8936 = CARTESIAN_POINT('',(0.75,-3.2,0.746007810594));+#8937 = VECTOR('',#8938,1.);+#8938 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8939 = PCURVE('',#8903,#8940);+#8940 = DEFINITIONAL_REPRESENTATION('',(#8941),#8945);+#8941 = LINE('',#8942,#8943);+#8942 = CARTESIAN_POINT('',(3.451437293332,0.));+#8943 = VECTOR('',#8944,1.);+#8944 = DIRECTION('',(-0.,1.));+#8945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8946 = PCURVE('',#8947,#8952);+#8947 = PLANE('',#8948);+#8948 = AXIS2_PLACEMENT_3D('',#8949,#8950,#8951);+#8949 = CARTESIAN_POINT('',(0.16,-3.2,-0.5));+#8950 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8951 = DIRECTION('',(0.,0.,1.));+#8952 = DEFINITIONAL_REPRESENTATION('',(#8953),#8957);+#8953 = LINE('',#8954,#8955);+#8954 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#8955 = VECTOR('',#8956,1.);+#8956 = DIRECTION('',(0.,-1.));+#8957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8958 = ORIENTED_EDGE('',*,*,#8959,.F.);+#8959 = EDGE_CURVE('',#8960,#8932,#8962,.T.);+#8960 = VERTEX_POINT('',#8961);+#8961 = CARTESIAN_POINT('',(0.66,-3.25,0.7825));+#8962 = SURFACE_CURVE('',#8963,(#8968,#8975),.PCURVE_S1.);+#8963 = CIRCLE('',#8964,5.25E-02);+#8964 = AXIS2_PLACEMENT_3D('',#8965,#8966,#8967);+#8965 = CARTESIAN_POINT('',(0.66,-3.25,0.73));+#8966 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#8967 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#8968 = PCURVE('',#8903,#8969);+#8969 = DEFINITIONAL_REPRESENTATION('',(#8970),#8974);+#8970 = LINE('',#8971,#8972);+#8971 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#8972 = VECTOR('',#8973,1.);+#8973 = DIRECTION('',(-1.,0.));+#8974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8975 = PCURVE('',#8976,#8981);+#8976 = PLANE('',#8977);+#8977 = AXIS2_PLACEMENT_3D('',#8978,#8979,#8980);+#8978 = CARTESIAN_POINT('',(0.66,-3.861815252728,0.337140815196));+#8979 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8980 = DIRECTION('',(0.,0.,1.));+#8981 = DEFINITIONAL_REPRESENTATION('',(#8982),#8990);+#8982 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8983,#8984,#8985,#8986,+#8987,#8988,#8989),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#8983 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#8984 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#8985 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#8986 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#8987 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#8988 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#8989 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#8990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8991 = ORIENTED_EDGE('',*,*,#8992,.T.);+#8992 = EDGE_CURVE('',#8960,#8892,#8993,.T.);+#8993 = SURFACE_CURVE('',#8994,(#8998,#9005),.PCURVE_S1.);+#8994 = LINE('',#8995,#8996);+#8995 = CARTESIAN_POINT('',(0.66,-3.25,0.7825));+#8996 = VECTOR('',#8997,1.);+#8997 = DIRECTION('',(1.,1.110223024625E-16,0.));+#8998 = PCURVE('',#8903,#8999);+#8999 = DEFINITIONAL_REPRESENTATION('',(#9000),#9004);+#9000 = LINE('',#9001,#9002);+#9001 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#9002 = VECTOR('',#9003,1.);+#9003 = DIRECTION('',(0.,1.));+#9004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9005 = PCURVE('',#9006,#9011);+#9006 = PLANE('',#9007);+#9007 = AXIS2_PLACEMENT_3D('',#9008,#9009,#9010);+#9008 = CARTESIAN_POINT('',(0.75,-3.25,0.7825));+#9009 = DIRECTION('',(0.,0.,1.));+#9010 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9011 = DEFINITIONAL_REPRESENTATION('',(#9012),#9016);+#9012 = LINE('',#9013,#9014);+#9013 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#9014 = VECTOR('',#9015,1.);+#9015 = DIRECTION('',(0.,1.));+#9016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9017 = ADVANCED_FACE('',(#9018),#9006,.T.);+#9018 = FACE_BOUND('',#9019,.T.);+#9019 = EDGE_LOOP('',(#9020,#9021,#9044,#9072));+#9020 = ORIENTED_EDGE('',*,*,#8992,.F.);+#9021 = ORIENTED_EDGE('',*,*,#9022,.T.);+#9022 = EDGE_CURVE('',#8960,#9023,#9025,.T.);+#9023 = VERTEX_POINT('',#9024);+#9024 = CARTESIAN_POINT('',(0.66,-3.52308092439,0.7825));+#9025 = SURFACE_CURVE('',#9026,(#9030,#9037),.PCURVE_S1.);+#9026 = LINE('',#9027,#9028);+#9027 = CARTESIAN_POINT('',(0.66,-3.25,0.7825));+#9028 = VECTOR('',#9029,1.);+#9029 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9030 = PCURVE('',#9006,#9031);+#9031 = DEFINITIONAL_REPRESENTATION('',(#9032),#9036);+#9032 = LINE('',#9033,#9034);+#9033 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#9034 = VECTOR('',#9035,1.);+#9035 = DIRECTION('',(1.,0.));+#9036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9037 = PCURVE('',#8976,#9038);+#9038 = DEFINITIONAL_REPRESENTATION('',(#9039),#9043);+#9039 = LINE('',#9040,#9041);+#9040 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#9041 = VECTOR('',#9042,1.);+#9042 = DIRECTION('',(0.,1.));+#9043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9044 = ORIENTED_EDGE('',*,*,#9045,.T.);+#9045 = EDGE_CURVE('',#9023,#9046,#9048,.T.);+#9046 = VERTEX_POINT('',#9047);+#9047 = CARTESIAN_POINT('',(0.84,-3.52308092439,0.7825));+#9048 = SURFACE_CURVE('',#9049,(#9053,#9060),.PCURVE_S1.);+#9049 = LINE('',#9050,#9051);+#9050 = CARTESIAN_POINT('',(0.66,-3.52308092439,0.7825));+#9051 = VECTOR('',#9052,1.);+#9052 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9053 = PCURVE('',#9006,#9054);+#9054 = DEFINITIONAL_REPRESENTATION('',(#9055),#9059);+#9055 = LINE('',#9056,#9057);+#9056 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#9057 = VECTOR('',#9058,1.);+#9058 = DIRECTION('',(0.,1.));+#9059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9060 = PCURVE('',#9061,#9066);+#9061 = CYLINDRICAL_SURFACE('',#9062,0.147);+#9062 = AXIS2_PLACEMENT_3D('',#9063,#9064,#9065);+#9063 = CARTESIAN_POINT('',(0.75,-3.52308092439,0.6355));+#9064 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9065 = DIRECTION('',(0.,0.,1.));+#9066 = DEFINITIONAL_REPRESENTATION('',(#9067),#9071);+#9067 = LINE('',#9068,#9069);+#9068 = CARTESIAN_POINT('',(0.,-9.E-02));+#9069 = VECTOR('',#9070,1.);+#9070 = DIRECTION('',(-0.,1.));+#9071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9072 = ORIENTED_EDGE('',*,*,#9073,.F.);+#9073 = EDGE_CURVE('',#8892,#9046,#9074,.T.);+#9074 = SURFACE_CURVE('',#9075,(#9079,#9086),.PCURVE_S1.);+#9075 = LINE('',#9076,#9077);+#9076 = CARTESIAN_POINT('',(0.84,-3.25,0.7825));+#9077 = VECTOR('',#9078,1.);+#9078 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9079 = PCURVE('',#9006,#9080);+#9080 = DEFINITIONAL_REPRESENTATION('',(#9081),#9085);+#9081 = LINE('',#9082,#9083);+#9082 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#9083 = VECTOR('',#9084,1.);+#9084 = DIRECTION('',(1.,0.));+#9085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9086 = PCURVE('',#8915,#9087);+#9087 = DEFINITIONAL_REPRESENTATION('',(#9088),#9092);+#9088 = LINE('',#9089,#9090);+#9089 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#9090 = VECTOR('',#9091,1.);+#9091 = DIRECTION('',(0.,1.));+#9092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9093 = ADVANCED_FACE('',(#9094),#8915,.T.);+#9094 = FACE_BOUND('',#9095,.T.);+#9095 = EDGE_LOOP('',(#9096,#9097,#9098,#9122,#9150,#9179,#9207,#9235,+ #9263,#9292,#9320,#9349,#9377,#9410));+#9096 = ORIENTED_EDGE('',*,*,#8891,.F.);+#9097 = ORIENTED_EDGE('',*,*,#9073,.T.);+#9098 = ORIENTED_EDGE('',*,*,#9099,.T.);+#9099 = EDGE_CURVE('',#9046,#9100,#9102,.T.);+#9100 = VERTEX_POINT('',#9101);+#9101 = CARTESIAN_POINT('',(0.84,-3.653021649751,0.704234328342));+#9102 = SURFACE_CURVE('',#9103,(#9108,#9115),.PCURVE_S1.);+#9103 = CIRCLE('',#9104,0.147);+#9104 = AXIS2_PLACEMENT_3D('',#9105,#9106,#9107);+#9105 = CARTESIAN_POINT('',(0.84,-3.52308092439,0.6355));+#9106 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#9107 = DIRECTION('',(0.,0.,1.));+#9108 = PCURVE('',#8915,#9109);+#9109 = DEFINITIONAL_REPRESENTATION('',(#9110),#9114);+#9110 = CIRCLE('',#9111,0.147);+#9111 = AXIS2_PLACEMENT_2D('',#9112,#9113);+#9112 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#9113 = DIRECTION('',(1.,0.));+#9114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9115 = PCURVE('',#9061,#9116);+#9116 = DEFINITIONAL_REPRESENTATION('',(#9117),#9121);+#9117 = LINE('',#9118,#9119);+#9118 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#9119 = VECTOR('',#9120,1.);+#9120 = DIRECTION('',(1.,-0.));+#9121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9122 = ORIENTED_EDGE('',*,*,#9123,.T.);+#9123 = EDGE_CURVE('',#9100,#9124,#9126,.T.);+#9124 = VERTEX_POINT('',#9125);+#9125 = CARTESIAN_POINT('',(0.84,-3.958168154079,0.127361620474));+#9126 = SURFACE_CURVE('',#9127,(#9131,#9138),.PCURVE_S1.);+#9127 = LINE('',#9128,#9129);+#9128 = CARTESIAN_POINT('',(0.84,-3.626407401915,0.754547974408));+#9129 = VECTOR('',#9130,1.);+#9130 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#9131 = PCURVE('',#8915,#9132);+#9132 = DEFINITIONAL_REPRESENTATION('',(#9133),#9137);+#9133 = LINE('',#9134,#9135);+#9134 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#9135 = VECTOR('',#9136,1.);+#9136 = DIRECTION('',(-0.883950512662,0.467580464908));+#9137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9138 = PCURVE('',#9139,#9144);+#9139 = PLANE('',#9140);+#9140 = AXIS2_PLACEMENT_3D('',#9141,#9142,#9143);+#9141 = CARTESIAN_POINT('',(0.75,-3.653021649751,0.704234328342));+#9142 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#9143 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#9144 = DEFINITIONAL_REPRESENTATION('',(#9145),#9149);+#9145 = LINE('',#9146,#9147);+#9146 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#9147 = VECTOR('',#9148,1.);+#9148 = DIRECTION('',(1.,-2.399596746007E-32));+#9149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9150 = ORIENTED_EDGE('',*,*,#9151,.F.);+#9151 = EDGE_CURVE('',#9152,#9124,#9154,.T.);+#9152 = VERTEX_POINT('',#9153);+#9153 = CARTESIAN_POINT('',(0.84,-3.99529407561,0.105));+#9154 = SURFACE_CURVE('',#9155,(#9160,#9167),.PCURVE_S1.);+#9155 = CIRCLE('',#9156,4.2E-02);+#9156 = AXIS2_PLACEMENT_3D('',#9157,#9158,#9159);+#9157 = CARTESIAN_POINT('',(0.84,-3.99529407561,0.147));+#9158 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#9159 = DIRECTION('',(0.,0.,1.));+#9160 = PCURVE('',#8915,#9161);+#9161 = DEFINITIONAL_REPRESENTATION('',(#9162),#9166);+#9162 = CIRCLE('',#9163,4.2E-02);+#9163 = AXIS2_PLACEMENT_2D('',#9164,#9165);+#9164 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#9165 = DIRECTION('',(1.,0.));+#9166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9167 = PCURVE('',#9168,#9173);+#9168 = CYLINDRICAL_SURFACE('',#9169,4.2E-02);+#9169 = AXIS2_PLACEMENT_3D('',#9170,#9171,#9172);+#9170 = CARTESIAN_POINT('',(0.75,-3.99529407561,0.147));+#9171 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9172 = DIRECTION('',(0.,0.,1.));+#9173 = DEFINITIONAL_REPRESENTATION('',(#9174),#9178);+#9174 = LINE('',#9175,#9176);+#9175 = CARTESIAN_POINT('',(-0.,9.E-02));+#9176 = VECTOR('',#9177,1.);+#9177 = DIRECTION('',(1.,-0.));+#9178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9179 = ORIENTED_EDGE('',*,*,#9180,.T.);+#9180 = EDGE_CURVE('',#9152,#9181,#9183,.T.);+#9181 = VERTEX_POINT('',#9182);+#9182 = CARTESIAN_POINT('',(0.84,-4.43,0.105));+#9183 = SURFACE_CURVE('',#9184,(#9188,#9195),.PCURVE_S1.);+#9184 = LINE('',#9185,#9186);+#9185 = CARTESIAN_POINT('',(0.84,-3.938375,0.105));+#9186 = VECTOR('',#9187,1.);+#9187 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9188 = PCURVE('',#8915,#9189);+#9189 = DEFINITIONAL_REPRESENTATION('',(#9190),#9194);+#9190 = LINE('',#9191,#9192);+#9191 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#9192 = VECTOR('',#9193,1.);+#9193 = DIRECTION('',(0.,1.));+#9194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9195 = PCURVE('',#9196,#9201);+#9196 = PLANE('',#9197);+#9197 = AXIS2_PLACEMENT_3D('',#9198,#9199,#9200);+#9198 = CARTESIAN_POINT('',(0.75,-3.99529407561,0.105));+#9199 = DIRECTION('',(0.,0.,1.));+#9200 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9201 = DEFINITIONAL_REPRESENTATION('',(#9202),#9206);+#9202 = LINE('',#9203,#9204);+#9203 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#9204 = VECTOR('',#9205,1.);+#9205 = DIRECTION('',(1.,0.));+#9206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9207 = ORIENTED_EDGE('',*,*,#9208,.T.);+#9208 = EDGE_CURVE('',#9181,#9209,#9211,.T.);+#9209 = VERTEX_POINT('',#9210);+#9210 = CARTESIAN_POINT('',(0.84,-4.43,0.));+#9211 = SURFACE_CURVE('',#9212,(#9216,#9223),.PCURVE_S1.);+#9212 = LINE('',#9213,#9214);+#9213 = CARTESIAN_POINT('',(0.84,-4.43,-8.142959240193E-02));+#9214 = VECTOR('',#9215,1.);+#9215 = DIRECTION('',(0.,0.,-1.));+#9216 = PCURVE('',#8915,#9217);+#9217 = DEFINITIONAL_REPRESENTATION('',(#9218),#9222);+#9218 = LINE('',#9219,#9220);+#9219 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#9220 = VECTOR('',#9221,1.);+#9221 = DIRECTION('',(-1.,0.));+#9222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9223 = PCURVE('',#9224,#9229);+#9224 = PLANE('',#9225);+#9225 = AXIS2_PLACEMENT_3D('',#9226,#9227,#9228);+#9226 = CARTESIAN_POINT('',(0.16,-4.43,-0.5));+#9227 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9228 = DIRECTION('',(0.,0.,1.));+#9229 = DEFINITIONAL_REPRESENTATION('',(#9230),#9234);+#9230 = LINE('',#9231,#9232);+#9231 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#9232 = VECTOR('',#9233,1.);+#9233 = DIRECTION('',(-1.,-0.));+#9234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9235 = ORIENTED_EDGE('',*,*,#9236,.F.);+#9236 = EDGE_CURVE('',#9237,#9209,#9239,.T.);+#9237 = VERTEX_POINT('',#9238);+#9238 = CARTESIAN_POINT('',(0.84,-3.99529407561,0.));+#9239 = SURFACE_CURVE('',#9240,(#9244,#9251),.PCURVE_S1.);+#9240 = LINE('',#9241,#9242);+#9241 = CARTESIAN_POINT('',(0.84,-3.938375,0.));+#9242 = VECTOR('',#9243,1.);+#9243 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9244 = PCURVE('',#8915,#9245);+#9245 = DEFINITIONAL_REPRESENTATION('',(#9246),#9250);+#9246 = LINE('',#9247,#9248);+#9247 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#9248 = VECTOR('',#9249,1.);+#9249 = DIRECTION('',(0.,1.));+#9250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9251 = PCURVE('',#9252,#9257);+#9252 = PLANE('',#9253);+#9253 = AXIS2_PLACEMENT_3D('',#9254,#9255,#9256);+#9254 = CARTESIAN_POINT('',(0.75,-3.99529407561,0.));+#9255 = DIRECTION('',(0.,0.,1.));+#9256 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9257 = DEFINITIONAL_REPRESENTATION('',(#9258),#9262);+#9258 = LINE('',#9259,#9260);+#9259 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#9260 = VECTOR('',#9261,1.);+#9261 = DIRECTION('',(1.,0.));+#9262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9263 = ORIENTED_EDGE('',*,*,#9264,.T.);+#9264 = EDGE_CURVE('',#9237,#9265,#9267,.T.);+#9265 = VERTEX_POINT('',#9266);+#9266 = CARTESIAN_POINT('',(0.84,-3.865353350249,7.826567165848E-02));+#9267 = SURFACE_CURVE('',#9268,(#9273,#9280),.PCURVE_S1.);+#9268 = CIRCLE('',#9269,0.147);+#9269 = AXIS2_PLACEMENT_3D('',#9270,#9271,#9272);+#9270 = CARTESIAN_POINT('',(0.84,-3.99529407561,0.147));+#9271 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#9272 = DIRECTION('',(0.,0.,1.));+#9273 = PCURVE('',#8915,#9274);+#9274 = DEFINITIONAL_REPRESENTATION('',(#9275),#9279);+#9275 = CIRCLE('',#9276,0.147);+#9276 = AXIS2_PLACEMENT_2D('',#9277,#9278);+#9277 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#9278 = DIRECTION('',(1.,0.));+#9279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9280 = PCURVE('',#9281,#9286);+#9281 = CYLINDRICAL_SURFACE('',#9282,0.147);+#9282 = AXIS2_PLACEMENT_3D('',#9283,#9284,#9285);+#9283 = CARTESIAN_POINT('',(0.75,-3.99529407561,0.147));+#9284 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9285 = DIRECTION('',(0.,0.,1.));+#9286 = DEFINITIONAL_REPRESENTATION('',(#9287),#9291);+#9287 = LINE('',#9288,#9289);+#9288 = CARTESIAN_POINT('',(-0.,9.E-02));+#9289 = VECTOR('',#9290,1.);+#9290 = DIRECTION('',(1.,-0.));+#9291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9292 = ORIENTED_EDGE('',*,*,#9293,.F.);+#9293 = EDGE_CURVE('',#9294,#9265,#9296,.T.);+#9294 = VERTEX_POINT('',#9295);+#9295 = CARTESIAN_POINT('',(0.84,-3.560206845921,0.655138379526));+#9296 = SURFACE_CURVE('',#9297,(#9301,#9308),.PCURVE_S1.);+#9297 = LINE('',#9298,#9299);+#9298 = CARTESIAN_POINT('',(0.84,-3.533592598085,0.705452025592));+#9299 = VECTOR('',#9300,1.);+#9300 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#9301 = PCURVE('',#8915,#9302);+#9302 = DEFINITIONAL_REPRESENTATION('',(#9303),#9307);+#9303 = LINE('',#9304,#9305);+#9304 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#9305 = VECTOR('',#9306,1.);+#9306 = DIRECTION('',(-0.883950512662,0.467580464908));+#9307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9308 = PCURVE('',#9309,#9314);+#9309 = PLANE('',#9310);+#9310 = AXIS2_PLACEMENT_3D('',#9311,#9312,#9313);+#9311 = CARTESIAN_POINT('',(0.75,-3.560206845921,0.655138379526));+#9312 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908)+ );+#9313 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#9314 = DEFINITIONAL_REPRESENTATION('',(#9315),#9319);+#9315 = LINE('',#9316,#9317);+#9316 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#9317 = VECTOR('',#9318,1.);+#9318 = DIRECTION('',(1.,-2.399596746007E-32));+#9319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9320 = ORIENTED_EDGE('',*,*,#9321,.F.);+#9321 = EDGE_CURVE('',#9322,#9294,#9324,.T.);+#9322 = VERTEX_POINT('',#9323);+#9323 = CARTESIAN_POINT('',(0.84,-3.52308092439,0.6775));+#9324 = SURFACE_CURVE('',#9325,(#9330,#9337),.PCURVE_S1.);+#9325 = CIRCLE('',#9326,4.2E-02);+#9326 = AXIS2_PLACEMENT_3D('',#9327,#9328,#9329);+#9327 = CARTESIAN_POINT('',(0.84,-3.52308092439,0.6355));+#9328 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#9329 = DIRECTION('',(0.,0.,1.));+#9330 = PCURVE('',#8915,#9331);+#9331 = DEFINITIONAL_REPRESENTATION('',(#9332),#9336);+#9332 = CIRCLE('',#9333,4.2E-02);+#9333 = AXIS2_PLACEMENT_2D('',#9334,#9335);+#9334 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#9335 = DIRECTION('',(1.,0.));+#9336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9337 = PCURVE('',#9338,#9343);+#9338 = CYLINDRICAL_SURFACE('',#9339,4.2E-02);+#9339 = AXIS2_PLACEMENT_3D('',#9340,#9341,#9342);+#9340 = CARTESIAN_POINT('',(0.75,-3.52308092439,0.6355));+#9341 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9342 = DIRECTION('',(0.,0.,1.));+#9343 = DEFINITIONAL_REPRESENTATION('',(#9344),#9348);+#9344 = LINE('',#9345,#9346);+#9345 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#9346 = VECTOR('',#9347,1.);+#9347 = DIRECTION('',(1.,-0.));+#9348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9349 = ORIENTED_EDGE('',*,*,#9350,.F.);+#9350 = EDGE_CURVE('',#9351,#9322,#9353,.T.);+#9351 = VERTEX_POINT('',#9352);+#9352 = CARTESIAN_POINT('',(0.84,-3.25,0.6775));+#9353 = SURFACE_CURVE('',#9354,(#9358,#9365),.PCURVE_S1.);+#9354 = LINE('',#9355,#9356);+#9355 = CARTESIAN_POINT('',(0.84,-3.25,0.6775));+#9356 = VECTOR('',#9357,1.);+#9357 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9358 = PCURVE('',#8915,#9359);+#9359 = DEFINITIONAL_REPRESENTATION('',(#9360),#9364);+#9360 = LINE('',#9361,#9362);+#9361 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#9362 = VECTOR('',#9363,1.);+#9363 = DIRECTION('',(0.,1.));+#9364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9365 = PCURVE('',#9366,#9371);+#9366 = PLANE('',#9367);+#9367 = AXIS2_PLACEMENT_3D('',#9368,#9369,#9370);+#9368 = CARTESIAN_POINT('',(0.75,-3.25,0.6775));+#9369 = DIRECTION('',(0.,0.,1.));+#9370 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9371 = DEFINITIONAL_REPRESENTATION('',(#9372),#9376);+#9372 = LINE('',#9373,#9374);+#9373 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#9374 = VECTOR('',#9375,1.);+#9375 = DIRECTION('',(1.,0.));+#9376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9377 = ORIENTED_EDGE('',*,*,#9378,.F.);+#9378 = EDGE_CURVE('',#9379,#9351,#9381,.T.);+#9379 = VERTEX_POINT('',#9380);+#9380 = CARTESIAN_POINT('',(0.84,-3.2,0.713992189406));+#9381 = SURFACE_CURVE('',#9382,(#9387,#9398),.PCURVE_S1.);+#9382 = CIRCLE('',#9383,5.25E-02);+#9383 = AXIS2_PLACEMENT_3D('',#9384,#9385,#9386);+#9384 = CARTESIAN_POINT('',(0.84,-3.25,0.73));+#9385 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#9386 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9387 = PCURVE('',#8915,#9388);+#9388 = DEFINITIONAL_REPRESENTATION('',(#9389),#9397);+#9389 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9390,#9391,#9392,#9393,+#9394,#9395,#9396),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9390 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#9391 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#9392 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#9393 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#9394 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#9395 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#9396 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#9397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9398 = PCURVE('',#9399,#9404);+#9399 = CYLINDRICAL_SURFACE('',#9400,5.25E-02);+#9400 = AXIS2_PLACEMENT_3D('',#9401,#9402,#9403);+#9401 = CARTESIAN_POINT('',(0.75,-3.25,0.73));+#9402 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9403 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9404 = DEFINITIONAL_REPRESENTATION('',(#9405),#9409);+#9405 = LINE('',#9406,#9407);+#9406 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#9407 = VECTOR('',#9408,1.);+#9408 = DIRECTION('',(-1.,-0.));+#9409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9410 = ORIENTED_EDGE('',*,*,#9411,.F.);+#9411 = EDGE_CURVE('',#8894,#9379,#9412,.T.);+#9412 = SURFACE_CURVE('',#9413,(#9417,#9424),.PCURVE_S1.);+#9413 = LINE('',#9414,#9415);+#9414 = CARTESIAN_POINT('',(0.84,-3.2,-8.142959240193E-02));+#9415 = VECTOR('',#9416,1.);+#9416 = DIRECTION('',(0.,0.,-1.));+#9417 = PCURVE('',#8915,#9418);+#9418 = DEFINITIONAL_REPRESENTATION('',(#9419),#9423);+#9419 = LINE('',#9420,#9421);+#9420 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#9421 = VECTOR('',#9422,1.);+#9422 = DIRECTION('',(-1.,0.));+#9423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9424 = PCURVE('',#8947,#9425);+#9425 = DEFINITIONAL_REPRESENTATION('',(#9426),#9430);+#9426 = LINE('',#9427,#9428);+#9427 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#9428 = VECTOR('',#9429,1.);+#9429 = DIRECTION('',(-1.,-0.));+#9430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9431 = ADVANCED_FACE('',(#9432),#8947,.F.);+#9432 = FACE_BOUND('',#9433,.F.);+#9433 = EDGE_LOOP('',(#9434,#9435,#9458,#9479));+#9434 = ORIENTED_EDGE('',*,*,#8931,.F.);+#9435 = ORIENTED_EDGE('',*,*,#9436,.T.);+#9436 = EDGE_CURVE('',#8932,#9437,#9439,.T.);+#9437 = VERTEX_POINT('',#9438);+#9438 = CARTESIAN_POINT('',(0.66,-3.2,0.713992189406));+#9439 = SURFACE_CURVE('',#9440,(#9444,#9451),.PCURVE_S1.);+#9440 = LINE('',#9441,#9442);+#9441 = CARTESIAN_POINT('',(0.66,-3.2,-8.142959240193E-02));+#9442 = VECTOR('',#9443,1.);+#9443 = DIRECTION('',(0.,0.,-1.));+#9444 = PCURVE('',#8947,#9445);+#9445 = DEFINITIONAL_REPRESENTATION('',(#9446),#9450);+#9446 = LINE('',#9447,#9448);+#9447 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#9448 = VECTOR('',#9449,1.);+#9449 = DIRECTION('',(-1.,-0.));+#9450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9451 = PCURVE('',#8976,#9452);+#9452 = DEFINITIONAL_REPRESENTATION('',(#9453),#9457);+#9453 = LINE('',#9454,#9455);+#9454 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#9455 = VECTOR('',#9456,1.);+#9456 = DIRECTION('',(-1.,0.));+#9457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9458 = ORIENTED_EDGE('',*,*,#9459,.T.);+#9459 = EDGE_CURVE('',#9437,#9379,#9460,.T.);+#9460 = SURFACE_CURVE('',#9461,(#9465,#9472),.PCURVE_S1.);+#9461 = LINE('',#9462,#9463);+#9462 = CARTESIAN_POINT('',(0.75,-3.2,0.713992189406));+#9463 = VECTOR('',#9464,1.);+#9464 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9465 = PCURVE('',#8947,#9466);+#9466 = DEFINITIONAL_REPRESENTATION('',(#9467),#9471);+#9467 = LINE('',#9468,#9469);+#9468 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#9469 = VECTOR('',#9470,1.);+#9470 = DIRECTION('',(0.,-1.));+#9471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9472 = PCURVE('',#9399,#9473);+#9473 = DEFINITIONAL_REPRESENTATION('',(#9474),#9478);+#9474 = LINE('',#9475,#9476);+#9475 = CARTESIAN_POINT('',(2.831748013849,0.));+#9476 = VECTOR('',#9477,1.);+#9477 = DIRECTION('',(-0.,1.));+#9478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9479 = ORIENTED_EDGE('',*,*,#9411,.F.);+#9480 = ADVANCED_FACE('',(#9481),#8976,.F.);+#9481 = FACE_BOUND('',#9482,.F.);+#9482 = EDGE_LOOP('',(#9483,#9484,#9485,#9509,#9532,#9556,#9579,#9602,+ #9625,#9649,#9672,#9696,#9719,#9745));+#9483 = ORIENTED_EDGE('',*,*,#8959,.F.);+#9484 = ORIENTED_EDGE('',*,*,#9022,.T.);+#9485 = ORIENTED_EDGE('',*,*,#9486,.T.);+#9486 = EDGE_CURVE('',#9023,#9487,#9489,.T.);+#9487 = VERTEX_POINT('',#9488);+#9488 = CARTESIAN_POINT('',(0.66,-3.653021649751,0.704234328342));+#9489 = SURFACE_CURVE('',#9490,(#9495,#9502),.PCURVE_S1.);+#9490 = CIRCLE('',#9491,0.147);+#9491 = AXIS2_PLACEMENT_3D('',#9492,#9493,#9494);+#9492 = CARTESIAN_POINT('',(0.66,-3.52308092439,0.6355));+#9493 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#9494 = DIRECTION('',(0.,0.,1.));+#9495 = PCURVE('',#8976,#9496);+#9496 = DEFINITIONAL_REPRESENTATION('',(#9497),#9501);+#9497 = CIRCLE('',#9498,0.147);+#9498 = AXIS2_PLACEMENT_2D('',#9499,#9500);+#9499 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#9500 = DIRECTION('',(1.,0.));+#9501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9502 = PCURVE('',#9061,#9503);+#9503 = DEFINITIONAL_REPRESENTATION('',(#9504),#9508);+#9504 = LINE('',#9505,#9506);+#9505 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#9506 = VECTOR('',#9507,1.);+#9507 = DIRECTION('',(1.,0.));+#9508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9509 = ORIENTED_EDGE('',*,*,#9510,.T.);+#9510 = EDGE_CURVE('',#9487,#9511,#9513,.T.);+#9511 = VERTEX_POINT('',#9512);+#9512 = CARTESIAN_POINT('',(0.66,-3.958168154079,0.127361620474));+#9513 = SURFACE_CURVE('',#9514,(#9518,#9525),.PCURVE_S1.);+#9514 = LINE('',#9515,#9516);+#9515 = CARTESIAN_POINT('',(0.66,-3.626407401915,0.754547974408));+#9516 = VECTOR('',#9517,1.);+#9517 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#9518 = PCURVE('',#8976,#9519);+#9519 = DEFINITIONAL_REPRESENTATION('',(#9520),#9524);+#9520 = LINE('',#9521,#9522);+#9521 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#9522 = VECTOR('',#9523,1.);+#9523 = DIRECTION('',(-0.883950512662,0.467580464908));+#9524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9525 = PCURVE('',#9139,#9526);+#9526 = DEFINITIONAL_REPRESENTATION('',(#9527),#9531);+#9527 = LINE('',#9528,#9529);+#9528 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#9529 = VECTOR('',#9530,1.);+#9530 = DIRECTION('',(1.,-2.399596746007E-32));+#9531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9532 = ORIENTED_EDGE('',*,*,#9533,.F.);+#9533 = EDGE_CURVE('',#9534,#9511,#9536,.T.);+#9534 = VERTEX_POINT('',#9535);+#9535 = CARTESIAN_POINT('',(0.66,-3.99529407561,0.105));+#9536 = SURFACE_CURVE('',#9537,(#9542,#9549),.PCURVE_S1.);+#9537 = CIRCLE('',#9538,4.2E-02);+#9538 = AXIS2_PLACEMENT_3D('',#9539,#9540,#9541);+#9539 = CARTESIAN_POINT('',(0.66,-3.99529407561,0.147));+#9540 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#9541 = DIRECTION('',(0.,0.,1.));+#9542 = PCURVE('',#8976,#9543);+#9543 = DEFINITIONAL_REPRESENTATION('',(#9544),#9548);+#9544 = CIRCLE('',#9545,4.2E-02);+#9545 = AXIS2_PLACEMENT_2D('',#9546,#9547);+#9546 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#9547 = DIRECTION('',(1.,0.));+#9548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9549 = PCURVE('',#9168,#9550);+#9550 = DEFINITIONAL_REPRESENTATION('',(#9551),#9555);+#9551 = LINE('',#9552,#9553);+#9552 = CARTESIAN_POINT('',(0.,-9.E-02));+#9553 = VECTOR('',#9554,1.);+#9554 = DIRECTION('',(1.,0.));+#9555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9556 = ORIENTED_EDGE('',*,*,#9557,.T.);+#9557 = EDGE_CURVE('',#9534,#9558,#9560,.T.);+#9558 = VERTEX_POINT('',#9559);+#9559 = CARTESIAN_POINT('',(0.66,-4.43,0.105));+#9560 = SURFACE_CURVE('',#9561,(#9565,#9572),.PCURVE_S1.);+#9561 = LINE('',#9562,#9563);+#9562 = CARTESIAN_POINT('',(0.66,-3.938375,0.105));+#9563 = VECTOR('',#9564,1.);+#9564 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9565 = PCURVE('',#8976,#9566);+#9566 = DEFINITIONAL_REPRESENTATION('',(#9567),#9571);+#9567 = LINE('',#9568,#9569);+#9568 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#9569 = VECTOR('',#9570,1.);+#9570 = DIRECTION('',(0.,1.));+#9571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9572 = PCURVE('',#9196,#9573);+#9573 = DEFINITIONAL_REPRESENTATION('',(#9574),#9578);+#9574 = LINE('',#9575,#9576);+#9575 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#9576 = VECTOR('',#9577,1.);+#9577 = DIRECTION('',(1.,0.));+#9578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9579 = ORIENTED_EDGE('',*,*,#9580,.T.);+#9580 = EDGE_CURVE('',#9558,#9581,#9583,.T.);+#9581 = VERTEX_POINT('',#9582);+#9582 = CARTESIAN_POINT('',(0.66,-4.43,0.));+#9583 = SURFACE_CURVE('',#9584,(#9588,#9595),.PCURVE_S1.);+#9584 = LINE('',#9585,#9586);+#9585 = CARTESIAN_POINT('',(0.66,-4.43,-8.142959240193E-02));+#9586 = VECTOR('',#9587,1.);+#9587 = DIRECTION('',(0.,0.,-1.));+#9588 = PCURVE('',#8976,#9589);+#9589 = DEFINITIONAL_REPRESENTATION('',(#9590),#9594);+#9590 = LINE('',#9591,#9592);+#9591 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#9592 = VECTOR('',#9593,1.);+#9593 = DIRECTION('',(-1.,0.));+#9594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9595 = PCURVE('',#9224,#9596);+#9596 = DEFINITIONAL_REPRESENTATION('',(#9597),#9601);+#9597 = LINE('',#9598,#9599);+#9598 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#9599 = VECTOR('',#9600,1.);+#9600 = DIRECTION('',(-1.,-0.));+#9601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9602 = ORIENTED_EDGE('',*,*,#9603,.F.);+#9603 = EDGE_CURVE('',#9604,#9581,#9606,.T.);+#9604 = VERTEX_POINT('',#9605);+#9605 = CARTESIAN_POINT('',(0.66,-3.99529407561,0.));+#9606 = SURFACE_CURVE('',#9607,(#9611,#9618),.PCURVE_S1.);+#9607 = LINE('',#9608,#9609);+#9608 = CARTESIAN_POINT('',(0.66,-3.938375,0.));+#9609 = VECTOR('',#9610,1.);+#9610 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9611 = PCURVE('',#8976,#9612);+#9612 = DEFINITIONAL_REPRESENTATION('',(#9613),#9617);+#9613 = LINE('',#9614,#9615);+#9614 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#9615 = VECTOR('',#9616,1.);+#9616 = DIRECTION('',(0.,1.));+#9617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9618 = PCURVE('',#9252,#9619);+#9619 = DEFINITIONAL_REPRESENTATION('',(#9620),#9624);+#9620 = LINE('',#9621,#9622);+#9621 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#9622 = VECTOR('',#9623,1.);+#9623 = DIRECTION('',(1.,0.));+#9624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9625 = ORIENTED_EDGE('',*,*,#9626,.T.);+#9626 = EDGE_CURVE('',#9604,#9627,#9629,.T.);+#9627 = VERTEX_POINT('',#9628);+#9628 = CARTESIAN_POINT('',(0.66,-3.865353350249,7.826567165848E-02));+#9629 = SURFACE_CURVE('',#9630,(#9635,#9642),.PCURVE_S1.);+#9630 = CIRCLE('',#9631,0.147);+#9631 = AXIS2_PLACEMENT_3D('',#9632,#9633,#9634);+#9632 = CARTESIAN_POINT('',(0.66,-3.99529407561,0.147));+#9633 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#9634 = DIRECTION('',(0.,0.,1.));+#9635 = PCURVE('',#8976,#9636);+#9636 = DEFINITIONAL_REPRESENTATION('',(#9637),#9641);+#9637 = CIRCLE('',#9638,0.147);+#9638 = AXIS2_PLACEMENT_2D('',#9639,#9640);+#9639 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#9640 = DIRECTION('',(1.,0.));+#9641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9642 = PCURVE('',#9281,#9643);+#9643 = DEFINITIONAL_REPRESENTATION('',(#9644),#9648);+#9644 = LINE('',#9645,#9646);+#9645 = CARTESIAN_POINT('',(0.,-9.E-02));+#9646 = VECTOR('',#9647,1.);+#9647 = DIRECTION('',(1.,0.));+#9648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9649 = ORIENTED_EDGE('',*,*,#9650,.F.);+#9650 = EDGE_CURVE('',#9651,#9627,#9653,.T.);+#9651 = VERTEX_POINT('',#9652);+#9652 = CARTESIAN_POINT('',(0.66,-3.560206845921,0.655138379526));+#9653 = SURFACE_CURVE('',#9654,(#9658,#9665),.PCURVE_S1.);+#9654 = LINE('',#9655,#9656);+#9655 = CARTESIAN_POINT('',(0.66,-3.533592598085,0.705452025592));+#9656 = VECTOR('',#9657,1.);+#9657 = DIRECTION('',(5.191185980065E-17,-0.467580464908,-0.883950512662+ ));+#9658 = PCURVE('',#8976,#9659);+#9659 = DEFINITIONAL_REPRESENTATION('',(#9660),#9664);+#9660 = LINE('',#9661,#9662);+#9661 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#9662 = VECTOR('',#9663,1.);+#9663 = DIRECTION('',(-0.883950512662,0.467580464908));+#9664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9665 = PCURVE('',#9309,#9666);+#9666 = DEFINITIONAL_REPRESENTATION('',(#9667),#9671);+#9667 = LINE('',#9668,#9669);+#9668 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#9669 = VECTOR('',#9670,1.);+#9670 = DIRECTION('',(1.,-2.399596746007E-32));+#9671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9672 = ORIENTED_EDGE('',*,*,#9673,.F.);+#9673 = EDGE_CURVE('',#9674,#9651,#9676,.T.);+#9674 = VERTEX_POINT('',#9675);+#9675 = CARTESIAN_POINT('',(0.66,-3.52308092439,0.6775));+#9676 = SURFACE_CURVE('',#9677,(#9682,#9689),.PCURVE_S1.);+#9677 = CIRCLE('',#9678,4.2E-02);+#9678 = AXIS2_PLACEMENT_3D('',#9679,#9680,#9681);+#9679 = CARTESIAN_POINT('',(0.66,-3.52308092439,0.6355));+#9680 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#9681 = DIRECTION('',(0.,0.,1.));+#9682 = PCURVE('',#8976,#9683);+#9683 = DEFINITIONAL_REPRESENTATION('',(#9684),#9688);+#9684 = CIRCLE('',#9685,4.2E-02);+#9685 = AXIS2_PLACEMENT_2D('',#9686,#9687);+#9686 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#9687 = DIRECTION('',(1.,0.));+#9688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9689 = PCURVE('',#9338,#9690);+#9690 = DEFINITIONAL_REPRESENTATION('',(#9691),#9695);+#9691 = LINE('',#9692,#9693);+#9692 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#9693 = VECTOR('',#9694,1.);+#9694 = DIRECTION('',(1.,0.));+#9695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9696 = ORIENTED_EDGE('',*,*,#9697,.F.);+#9697 = EDGE_CURVE('',#9698,#9674,#9700,.T.);+#9698 = VERTEX_POINT('',#9699);+#9699 = CARTESIAN_POINT('',(0.66,-3.25,0.6775));+#9700 = SURFACE_CURVE('',#9701,(#9705,#9712),.PCURVE_S1.);+#9701 = LINE('',#9702,#9703);+#9702 = CARTESIAN_POINT('',(0.66,-3.25,0.6775));+#9703 = VECTOR('',#9704,1.);+#9704 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9705 = PCURVE('',#8976,#9706);+#9706 = DEFINITIONAL_REPRESENTATION('',(#9707),#9711);+#9707 = LINE('',#9708,#9709);+#9708 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#9709 = VECTOR('',#9710,1.);+#9710 = DIRECTION('',(0.,1.));+#9711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9712 = PCURVE('',#9366,#9713);+#9713 = DEFINITIONAL_REPRESENTATION('',(#9714),#9718);+#9714 = LINE('',#9715,#9716);+#9715 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#9716 = VECTOR('',#9717,1.);+#9717 = DIRECTION('',(1.,0.));+#9718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9719 = ORIENTED_EDGE('',*,*,#9720,.F.);+#9720 = EDGE_CURVE('',#9437,#9698,#9721,.T.);+#9721 = SURFACE_CURVE('',#9722,(#9727,#9738),.PCURVE_S1.);+#9722 = CIRCLE('',#9723,5.25E-02);+#9723 = AXIS2_PLACEMENT_3D('',#9724,#9725,#9726);+#9724 = CARTESIAN_POINT('',(0.66,-3.25,0.73));+#9725 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#9726 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#9727 = PCURVE('',#8976,#9728);+#9728 = DEFINITIONAL_REPRESENTATION('',(#9729),#9737);+#9729 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9730,#9731,#9732,#9733,+#9734,#9735,#9736),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+ ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#9730 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#9731 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#9732 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#9733 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#9734 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#9735 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#9736 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#9737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9738 = PCURVE('',#9399,#9739);+#9739 = DEFINITIONAL_REPRESENTATION('',(#9740),#9744);+#9740 = LINE('',#9741,#9742);+#9741 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#9742 = VECTOR('',#9743,1.);+#9743 = DIRECTION('',(-1.,0.));+#9744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9745 = ORIENTED_EDGE('',*,*,#9436,.F.);+#9746 = ADVANCED_FACE('',(#9747),#9061,.T.);+#9747 = FACE_BOUND('',#9748,.T.);+#9748 = EDGE_LOOP('',(#9749,#9750,#9751,#9772));+#9749 = ORIENTED_EDGE('',*,*,#9045,.F.);+#9750 = ORIENTED_EDGE('',*,*,#9486,.T.);+#9751 = ORIENTED_EDGE('',*,*,#9752,.T.);+#9752 = EDGE_CURVE('',#9487,#9100,#9753,.T.);+#9753 = SURFACE_CURVE('',#9754,(#9758,#9765),.PCURVE_S1.);+#9754 = LINE('',#9755,#9756);+#9755 = CARTESIAN_POINT('',(0.66,-3.653021649751,0.704234328342));+#9756 = VECTOR('',#9757,1.);+#9757 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9758 = PCURVE('',#9061,#9759);+#9759 = DEFINITIONAL_REPRESENTATION('',(#9760),#9764);+#9760 = LINE('',#9761,#9762);+#9761 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#9762 = VECTOR('',#9763,1.);+#9763 = DIRECTION('',(-0.,1.));+#9764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9765 = PCURVE('',#9139,#9766);+#9766 = DEFINITIONAL_REPRESENTATION('',(#9767),#9771);+#9767 = LINE('',#9768,#9769);+#9768 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#9769 = VECTOR('',#9770,1.);+#9770 = DIRECTION('',(4.767113258106E-29,1.));+#9771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9772 = ORIENTED_EDGE('',*,*,#9099,.F.);+#9773 = ADVANCED_FACE('',(#9774),#9399,.T.);+#9774 = FACE_BOUND('',#9775,.T.);+#9775 = EDGE_LOOP('',(#9776,#9777,#9798,#9799));+#9776 = ORIENTED_EDGE('',*,*,#9378,.T.);+#9777 = ORIENTED_EDGE('',*,*,#9778,.T.);+#9778 = EDGE_CURVE('',#9351,#9698,#9779,.T.);+#9779 = SURFACE_CURVE('',#9780,(#9784,#9791),.PCURVE_S1.);+#9780 = LINE('',#9781,#9782);+#9781 = CARTESIAN_POINT('',(0.84,-3.25,0.6775));+#9782 = VECTOR('',#9783,1.);+#9783 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#9784 = PCURVE('',#9399,#9785);+#9785 = DEFINITIONAL_REPRESENTATION('',(#9786),#9790);+#9786 = LINE('',#9787,#9788);+#9787 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#9788 = VECTOR('',#9789,1.);+#9789 = DIRECTION('',(-0.,-1.));+#9790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9791 = PCURVE('',#9366,#9792);+#9792 = DEFINITIONAL_REPRESENTATION('',(#9793),#9797);+#9793 = LINE('',#9794,#9795);+#9794 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#9795 = VECTOR('',#9796,1.);+#9796 = DIRECTION('',(0.,-1.));+#9797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9798 = ORIENTED_EDGE('',*,*,#9720,.F.);+#9799 = ORIENTED_EDGE('',*,*,#9459,.T.);+#9800 = ADVANCED_FACE('',(#9801),#9366,.F.);+#9801 = FACE_BOUND('',#9802,.F.);+#9802 = EDGE_LOOP('',(#9803,#9804,#9825,#9826));+#9803 = ORIENTED_EDGE('',*,*,#9697,.T.);+#9804 = ORIENTED_EDGE('',*,*,#9805,.F.);+#9805 = EDGE_CURVE('',#9322,#9674,#9806,.T.);+#9806 = SURFACE_CURVE('',#9807,(#9811,#9818),.PCURVE_S1.);+#9807 = LINE('',#9808,#9809);+#9808 = CARTESIAN_POINT('',(0.84,-3.52308092439,0.6775));+#9809 = VECTOR('',#9810,1.);+#9810 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#9811 = PCURVE('',#9366,#9812);+#9812 = DEFINITIONAL_REPRESENTATION('',(#9813),#9817);+#9813 = LINE('',#9814,#9815);+#9814 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#9815 = VECTOR('',#9816,1.);+#9816 = DIRECTION('',(0.,-1.));+#9817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9818 = PCURVE('',#9338,#9819);+#9819 = DEFINITIONAL_REPRESENTATION('',(#9820),#9824);+#9820 = LINE('',#9821,#9822);+#9821 = CARTESIAN_POINT('',(0.,9.E-02));+#9822 = VECTOR('',#9823,1.);+#9823 = DIRECTION('',(0.,-1.));+#9824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9825 = ORIENTED_EDGE('',*,*,#9350,.F.);+#9826 = ORIENTED_EDGE('',*,*,#9778,.T.);+#9827 = ADVANCED_FACE('',(#9828),#9338,.F.);+#9828 = FACE_BOUND('',#9829,.F.);+#9829 = EDGE_LOOP('',(#9830,#9831,#9852,#9853));+#9830 = ORIENTED_EDGE('',*,*,#9673,.T.);+#9831 = ORIENTED_EDGE('',*,*,#9832,.F.);+#9832 = EDGE_CURVE('',#9294,#9651,#9833,.T.);+#9833 = SURFACE_CURVE('',#9834,(#9838,#9845),.PCURVE_S1.);+#9834 = LINE('',#9835,#9836);+#9835 = CARTESIAN_POINT('',(0.84,-3.560206845921,0.655138379526));+#9836 = VECTOR('',#9837,1.);+#9837 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#9838 = PCURVE('',#9338,#9839);+#9839 = DEFINITIONAL_REPRESENTATION('',(#9840),#9844);+#9840 = LINE('',#9841,#9842);+#9841 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#9842 = VECTOR('',#9843,1.);+#9843 = DIRECTION('',(0.,-1.));+#9844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9845 = PCURVE('',#9309,#9846);+#9846 = DEFINITIONAL_REPRESENTATION('',(#9847),#9851);+#9847 = LINE('',#9848,#9849);+#9848 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#9849 = VECTOR('',#9850,1.);+#9850 = DIRECTION('',(-4.767113258106E-29,-1.));+#9851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9852 = ORIENTED_EDGE('',*,*,#9321,.F.);+#9853 = ORIENTED_EDGE('',*,*,#9805,.T.);+#9854 = ADVANCED_FACE('',(#9855),#9309,.F.);+#9855 = FACE_BOUND('',#9856,.F.);+#9856 = EDGE_LOOP('',(#9857,#9858,#9879,#9880));+#9857 = ORIENTED_EDGE('',*,*,#9650,.T.);+#9858 = ORIENTED_EDGE('',*,*,#9859,.F.);+#9859 = EDGE_CURVE('',#9265,#9627,#9860,.T.);+#9860 = SURFACE_CURVE('',#9861,(#9865,#9872),.PCURVE_S1.);+#9861 = LINE('',#9862,#9863);+#9862 = CARTESIAN_POINT('',(0.84,-3.865353350249,7.826567165848E-02));+#9863 = VECTOR('',#9864,1.);+#9864 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#9865 = PCURVE('',#9309,#9866);+#9866 = DEFINITIONAL_REPRESENTATION('',(#9867),#9871);+#9867 = LINE('',#9868,#9869);+#9868 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#9869 = VECTOR('',#9870,1.);+#9870 = DIRECTION('',(-4.767113258106E-29,-1.));+#9871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9872 = PCURVE('',#9281,#9873);+#9873 = DEFINITIONAL_REPRESENTATION('',(#9874),#9878);+#9874 = LINE('',#9875,#9876);+#9875 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#9876 = VECTOR('',#9877,1.);+#9877 = DIRECTION('',(0.,-1.));+#9878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9879 = ORIENTED_EDGE('',*,*,#9293,.F.);+#9880 = ORIENTED_EDGE('',*,*,#9832,.T.);+#9881 = ADVANCED_FACE('',(#9882),#9281,.T.);+#9882 = FACE_BOUND('',#9883,.T.);+#9883 = EDGE_LOOP('',(#9884,#9885,#9886,#9887));+#9884 = ORIENTED_EDGE('',*,*,#9626,.T.);+#9885 = ORIENTED_EDGE('',*,*,#9859,.F.);+#9886 = ORIENTED_EDGE('',*,*,#9264,.F.);+#9887 = ORIENTED_EDGE('',*,*,#9888,.T.);+#9888 = EDGE_CURVE('',#9237,#9604,#9889,.T.);+#9889 = SURFACE_CURVE('',#9890,(#9894,#9901),.PCURVE_S1.);+#9890 = LINE('',#9891,#9892);+#9891 = CARTESIAN_POINT('',(0.84,-3.99529407561,0.));+#9892 = VECTOR('',#9893,1.);+#9893 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#9894 = PCURVE('',#9281,#9895);+#9895 = DEFINITIONAL_REPRESENTATION('',(#9896),#9900);+#9896 = LINE('',#9897,#9898);+#9897 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#9898 = VECTOR('',#9899,1.);+#9899 = DIRECTION('',(0.,-1.));+#9900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9901 = PCURVE('',#9252,#9902);+#9902 = DEFINITIONAL_REPRESENTATION('',(#9903),#9907);+#9903 = LINE('',#9904,#9905);+#9904 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#9905 = VECTOR('',#9906,1.);+#9906 = DIRECTION('',(0.,-1.));+#9907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9908 = ADVANCED_FACE('',(#9909),#9252,.F.);+#9909 = FACE_BOUND('',#9910,.F.);+#9910 = EDGE_LOOP('',(#9911,#9912,#9913,#9934));+#9911 = ORIENTED_EDGE('',*,*,#9888,.T.);+#9912 = ORIENTED_EDGE('',*,*,#9603,.T.);+#9913 = ORIENTED_EDGE('',*,*,#9914,.T.);+#9914 = EDGE_CURVE('',#9581,#9209,#9915,.T.);+#9915 = SURFACE_CURVE('',#9916,(#9920,#9927),.PCURVE_S1.);+#9916 = LINE('',#9917,#9918);+#9917 = CARTESIAN_POINT('',(0.455,-4.43,0.));+#9918 = VECTOR('',#9919,1.);+#9919 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9920 = PCURVE('',#9252,#9921);+#9921 = DEFINITIONAL_REPRESENTATION('',(#9922),#9926);+#9922 = LINE('',#9923,#9924);+#9923 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#9924 = VECTOR('',#9925,1.);+#9925 = DIRECTION('',(0.,1.));+#9926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9927 = PCURVE('',#9224,#9928);+#9928 = DEFINITIONAL_REPRESENTATION('',(#9929),#9933);+#9929 = LINE('',#9930,#9931);+#9930 = CARTESIAN_POINT('',(0.5,-0.295));+#9931 = VECTOR('',#9932,1.);+#9932 = DIRECTION('',(0.,-1.));+#9933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9934 = ORIENTED_EDGE('',*,*,#9236,.F.);+#9935 = ADVANCED_FACE('',(#9936),#9224,.T.);+#9936 = FACE_BOUND('',#9937,.T.);+#9937 = EDGE_LOOP('',(#9938,#9939,#9960,#9961));+#9938 = ORIENTED_EDGE('',*,*,#9208,.F.);+#9939 = ORIENTED_EDGE('',*,*,#9940,.F.);+#9940 = EDGE_CURVE('',#9558,#9181,#9941,.T.);+#9941 = SURFACE_CURVE('',#9942,(#9946,#9953),.PCURVE_S1.);+#9942 = LINE('',#9943,#9944);+#9943 = CARTESIAN_POINT('',(0.455,-4.43,0.105));+#9944 = VECTOR('',#9945,1.);+#9945 = DIRECTION('',(1.,1.110223024625E-16,0.));+#9946 = PCURVE('',#9224,#9947);+#9947 = DEFINITIONAL_REPRESENTATION('',(#9948),#9952);+#9948 = LINE('',#9949,#9950);+#9949 = CARTESIAN_POINT('',(0.605,-0.295));+#9950 = VECTOR('',#9951,1.);+#9951 = DIRECTION('',(0.,-1.));+#9952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9953 = PCURVE('',#9196,#9954);+#9954 = DEFINITIONAL_REPRESENTATION('',(#9955),#9959);+#9955 = LINE('',#9956,#9957);+#9956 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#9957 = VECTOR('',#9958,1.);+#9958 = DIRECTION('',(0.,1.));+#9959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9960 = ORIENTED_EDGE('',*,*,#9580,.T.);+#9961 = ORIENTED_EDGE('',*,*,#9914,.T.);+#9962 = ADVANCED_FACE('',(#9963),#9196,.T.);+#9963 = FACE_BOUND('',#9964,.T.);+#9964 = EDGE_LOOP('',(#9965,#9986,#9987,#9988));+#9965 = ORIENTED_EDGE('',*,*,#9966,.T.);+#9966 = EDGE_CURVE('',#9152,#9534,#9967,.T.);+#9967 = SURFACE_CURVE('',#9968,(#9972,#9979),.PCURVE_S1.);+#9968 = LINE('',#9969,#9970);+#9969 = CARTESIAN_POINT('',(0.84,-3.99529407561,0.105));+#9970 = VECTOR('',#9971,1.);+#9971 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#9972 = PCURVE('',#9196,#9973);+#9973 = DEFINITIONAL_REPRESENTATION('',(#9974),#9978);+#9974 = LINE('',#9975,#9976);+#9975 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#9976 = VECTOR('',#9977,1.);+#9977 = DIRECTION('',(0.,-1.));+#9978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9979 = PCURVE('',#9168,#9980);+#9980 = DEFINITIONAL_REPRESENTATION('',(#9981),#9985);+#9981 = LINE('',#9982,#9983);+#9982 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#9983 = VECTOR('',#9984,1.);+#9984 = DIRECTION('',(0.,-1.));+#9985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9986 = ORIENTED_EDGE('',*,*,#9557,.T.);+#9987 = ORIENTED_EDGE('',*,*,#9940,.T.);+#9988 = ORIENTED_EDGE('',*,*,#9180,.F.);+#9989 = ADVANCED_FACE('',(#9990),#9168,.F.);+#9990 = FACE_BOUND('',#9991,.F.);+#9991 = EDGE_LOOP('',(#9992,#9993,#10014,#10015));+#9992 = ORIENTED_EDGE('',*,*,#9533,.T.);+#9993 = ORIENTED_EDGE('',*,*,#9994,.F.);+#9994 = EDGE_CURVE('',#9124,#9511,#9995,.T.);+#9995 = SURFACE_CURVE('',#9996,(#10000,#10007),.PCURVE_S1.);+#9996 = LINE('',#9997,#9998);+#9997 = CARTESIAN_POINT('',(0.84,-3.958168154079,0.127361620474));+#9998 = VECTOR('',#9999,1.);+#9999 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#10000 = PCURVE('',#9168,#10001);+#10001 = DEFINITIONAL_REPRESENTATION('',(#10002),#10006);+#10002 = LINE('',#10003,#10004);+#10003 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#10004 = VECTOR('',#10005,1.);+#10005 = DIRECTION('',(0.,-1.));+#10006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10007 = PCURVE('',#9139,#10008);+#10008 = DEFINITIONAL_REPRESENTATION('',(#10009),#10013);+#10009 = LINE('',#10010,#10011);+#10010 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#10011 = VECTOR('',#10012,1.);+#10012 = DIRECTION('',(-4.767113258106E-29,-1.));+#10013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10014 = ORIENTED_EDGE('',*,*,#9151,.F.);+#10015 = ORIENTED_EDGE('',*,*,#9966,.T.);+#10016 = ADVANCED_FACE('',(#10017),#9139,.T.);+#10017 = FACE_BOUND('',#10018,.T.);+#10018 = EDGE_LOOP('',(#10019,#10020,#10021,#10022));+#10019 = ORIENTED_EDGE('',*,*,#9752,.F.);+#10020 = ORIENTED_EDGE('',*,*,#9510,.T.);+#10021 = ORIENTED_EDGE('',*,*,#9994,.F.);+#10022 = ORIENTED_EDGE('',*,*,#9123,.F.);+#10023 = MANIFOLD_SOLID_BREP('',#10024);+#10024 = CLOSED_SHELL('',(#10025,#10155,#10231,#10569,#10618,#10884,+ #10911,#10938,#10965,#10992,#11019,#11046,#11073,#11100,#11127,+ #11154));+#10025 = ADVANCED_FACE('',(#10026),#10041,.T.);+#10026 = FACE_BOUND('',#10027,.T.);+#10027 = EDGE_LOOP('',(#10028,#10068,#10096,#10129));+#10028 = ORIENTED_EDGE('',*,*,#10029,.T.);+#10029 = EDGE_CURVE('',#10030,#10032,#10034,.T.);+#10030 = VERTEX_POINT('',#10031);+#10031 = CARTESIAN_POINT('',(1.34,-3.25,0.7825));+#10032 = VERTEX_POINT('',#10033);+#10033 = CARTESIAN_POINT('',(1.34,-3.2,0.746007810594));+#10034 = SURFACE_CURVE('',#10035,(#10040,#10052),.PCURVE_S1.);+#10035 = CIRCLE('',#10036,5.25E-02);+#10036 = AXIS2_PLACEMENT_3D('',#10037,#10038,#10039);+#10037 = CARTESIAN_POINT('',(1.34,-3.25,0.73));+#10038 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#10039 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10040 = PCURVE('',#10041,#10046);+#10041 = CYLINDRICAL_SURFACE('',#10042,5.25E-02);+#10042 = AXIS2_PLACEMENT_3D('',#10043,#10044,#10045);+#10043 = CARTESIAN_POINT('',(1.25,-3.25,0.73));+#10044 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10045 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10046 = DEFINITIONAL_REPRESENTATION('',(#10047),#10051);+#10047 = LINE('',#10048,#10049);+#10048 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#10049 = VECTOR('',#10050,1.);+#10050 = DIRECTION('',(-1.,-0.));+#10051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10052 = PCURVE('',#10053,#10058);+#10053 = PLANE('',#10054);+#10054 = AXIS2_PLACEMENT_3D('',#10055,#10056,#10057);+#10055 = CARTESIAN_POINT('',(1.34,-3.861815252728,0.337140815196));+#10056 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10057 = DIRECTION('',(0.,0.,1.));+#10058 = DEFINITIONAL_REPRESENTATION('',(#10059),#10067);+#10059 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10060,#10061,#10062,#10063+ ,#10064,#10065,#10066),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10060 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#10061 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#10062 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#10063 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#10064 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#10065 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#10066 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#10067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10068 = ORIENTED_EDGE('',*,*,#10069,.F.);+#10069 = EDGE_CURVE('',#10070,#10032,#10072,.T.);+#10070 = VERTEX_POINT('',#10071);+#10071 = CARTESIAN_POINT('',(1.16,-3.2,0.746007810594));+#10072 = SURFACE_CURVE('',#10073,(#10077,#10084),.PCURVE_S1.);+#10073 = LINE('',#10074,#10075);+#10074 = CARTESIAN_POINT('',(1.25,-3.2,0.746007810594));+#10075 = VECTOR('',#10076,1.);+#10076 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10077 = PCURVE('',#10041,#10078);+#10078 = DEFINITIONAL_REPRESENTATION('',(#10079),#10083);+#10079 = LINE('',#10080,#10081);+#10080 = CARTESIAN_POINT('',(3.451437293332,0.));+#10081 = VECTOR('',#10082,1.);+#10082 = DIRECTION('',(-0.,1.));+#10083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10084 = PCURVE('',#10085,#10090);+#10085 = PLANE('',#10086);+#10086 = AXIS2_PLACEMENT_3D('',#10087,#10088,#10089);+#10087 = CARTESIAN_POINT('',(0.66,-3.2,-0.5));+#10088 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10089 = DIRECTION('',(0.,0.,1.));+#10090 = DEFINITIONAL_REPRESENTATION('',(#10091),#10095);+#10091 = LINE('',#10092,#10093);+#10092 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#10093 = VECTOR('',#10094,1.);+#10094 = DIRECTION('',(0.,-1.));+#10095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10096 = ORIENTED_EDGE('',*,*,#10097,.F.);+#10097 = EDGE_CURVE('',#10098,#10070,#10100,.T.);+#10098 = VERTEX_POINT('',#10099);+#10099 = CARTESIAN_POINT('',(1.16,-3.25,0.7825));+#10100 = SURFACE_CURVE('',#10101,(#10106,#10113),.PCURVE_S1.);+#10101 = CIRCLE('',#10102,5.25E-02);+#10102 = AXIS2_PLACEMENT_3D('',#10103,#10104,#10105);+#10103 = CARTESIAN_POINT('',(1.16,-3.25,0.73));+#10104 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#10105 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10106 = PCURVE('',#10041,#10107);+#10107 = DEFINITIONAL_REPRESENTATION('',(#10108),#10112);+#10108 = LINE('',#10109,#10110);+#10109 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#10110 = VECTOR('',#10111,1.);+#10111 = DIRECTION('',(-1.,0.));+#10112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10113 = PCURVE('',#10114,#10119);+#10114 = PLANE('',#10115);+#10115 = AXIS2_PLACEMENT_3D('',#10116,#10117,#10118);+#10116 = CARTESIAN_POINT('',(1.16,-3.861815252728,0.337140815196));+#10117 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10118 = DIRECTION('',(0.,0.,1.));+#10119 = DEFINITIONAL_REPRESENTATION('',(#10120),#10128);+#10120 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10121,#10122,#10123,#10124+ ,#10125,#10126,#10127),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10121 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#10122 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#10123 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#10124 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#10125 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#10126 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#10127 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#10128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10129 = ORIENTED_EDGE('',*,*,#10130,.T.);+#10130 = EDGE_CURVE('',#10098,#10030,#10131,.T.);+#10131 = SURFACE_CURVE('',#10132,(#10136,#10143),.PCURVE_S1.);+#10132 = LINE('',#10133,#10134);+#10133 = CARTESIAN_POINT('',(1.16,-3.25,0.7825));+#10134 = VECTOR('',#10135,1.);+#10135 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10136 = PCURVE('',#10041,#10137);+#10137 = DEFINITIONAL_REPRESENTATION('',(#10138),#10142);+#10138 = LINE('',#10139,#10140);+#10139 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#10140 = VECTOR('',#10141,1.);+#10141 = DIRECTION('',(0.,1.));+#10142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10143 = PCURVE('',#10144,#10149);+#10144 = PLANE('',#10145);+#10145 = AXIS2_PLACEMENT_3D('',#10146,#10147,#10148);+#10146 = CARTESIAN_POINT('',(1.25,-3.25,0.7825));+#10147 = DIRECTION('',(0.,0.,1.));+#10148 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10149 = DEFINITIONAL_REPRESENTATION('',(#10150),#10154);+#10150 = LINE('',#10151,#10152);+#10151 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#10152 = VECTOR('',#10153,1.);+#10153 = DIRECTION('',(0.,1.));+#10154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10155 = ADVANCED_FACE('',(#10156),#10144,.T.);+#10156 = FACE_BOUND('',#10157,.T.);+#10157 = EDGE_LOOP('',(#10158,#10159,#10182,#10210));+#10158 = ORIENTED_EDGE('',*,*,#10130,.F.);+#10159 = ORIENTED_EDGE('',*,*,#10160,.T.);+#10160 = EDGE_CURVE('',#10098,#10161,#10163,.T.);+#10161 = VERTEX_POINT('',#10162);+#10162 = CARTESIAN_POINT('',(1.16,-3.52308092439,0.7825));+#10163 = SURFACE_CURVE('',#10164,(#10168,#10175),.PCURVE_S1.);+#10164 = LINE('',#10165,#10166);+#10165 = CARTESIAN_POINT('',(1.16,-3.25,0.7825));+#10166 = VECTOR('',#10167,1.);+#10167 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10168 = PCURVE('',#10144,#10169);+#10169 = DEFINITIONAL_REPRESENTATION('',(#10170),#10174);+#10170 = LINE('',#10171,#10172);+#10171 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#10172 = VECTOR('',#10173,1.);+#10173 = DIRECTION('',(1.,0.));+#10174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10175 = PCURVE('',#10114,#10176);+#10176 = DEFINITIONAL_REPRESENTATION('',(#10177),#10181);+#10177 = LINE('',#10178,#10179);+#10178 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#10179 = VECTOR('',#10180,1.);+#10180 = DIRECTION('',(0.,1.));+#10181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10182 = ORIENTED_EDGE('',*,*,#10183,.T.);+#10183 = EDGE_CURVE('',#10161,#10184,#10186,.T.);+#10184 = VERTEX_POINT('',#10185);+#10185 = CARTESIAN_POINT('',(1.34,-3.52308092439,0.7825));+#10186 = SURFACE_CURVE('',#10187,(#10191,#10198),.PCURVE_S1.);+#10187 = LINE('',#10188,#10189);+#10188 = CARTESIAN_POINT('',(1.16,-3.52308092439,0.7825));+#10189 = VECTOR('',#10190,1.);+#10190 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10191 = PCURVE('',#10144,#10192);+#10192 = DEFINITIONAL_REPRESENTATION('',(#10193),#10197);+#10193 = LINE('',#10194,#10195);+#10194 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#10195 = VECTOR('',#10196,1.);+#10196 = DIRECTION('',(0.,1.));+#10197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10198 = PCURVE('',#10199,#10204);+#10199 = CYLINDRICAL_SURFACE('',#10200,0.147);+#10200 = AXIS2_PLACEMENT_3D('',#10201,#10202,#10203);+#10201 = CARTESIAN_POINT('',(1.25,-3.52308092439,0.6355));+#10202 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10203 = DIRECTION('',(0.,0.,1.));+#10204 = DEFINITIONAL_REPRESENTATION('',(#10205),#10209);+#10205 = LINE('',#10206,#10207);+#10206 = CARTESIAN_POINT('',(0.,-9.E-02));+#10207 = VECTOR('',#10208,1.);+#10208 = DIRECTION('',(-0.,1.));+#10209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10210 = ORIENTED_EDGE('',*,*,#10211,.F.);+#10211 = EDGE_CURVE('',#10030,#10184,#10212,.T.);+#10212 = SURFACE_CURVE('',#10213,(#10217,#10224),.PCURVE_S1.);+#10213 = LINE('',#10214,#10215);+#10214 = CARTESIAN_POINT('',(1.34,-3.25,0.7825));+#10215 = VECTOR('',#10216,1.);+#10216 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10217 = PCURVE('',#10144,#10218);+#10218 = DEFINITIONAL_REPRESENTATION('',(#10219),#10223);+#10219 = LINE('',#10220,#10221);+#10220 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#10221 = VECTOR('',#10222,1.);+#10222 = DIRECTION('',(1.,0.));+#10223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10224 = PCURVE('',#10053,#10225);+#10225 = DEFINITIONAL_REPRESENTATION('',(#10226),#10230);+#10226 = LINE('',#10227,#10228);+#10227 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#10228 = VECTOR('',#10229,1.);+#10229 = DIRECTION('',(0.,1.));+#10230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10231 = ADVANCED_FACE('',(#10232),#10053,.T.);+#10232 = FACE_BOUND('',#10233,.T.);+#10233 = EDGE_LOOP('',(#10234,#10235,#10236,#10260,#10288,#10317,#10345,+ #10373,#10401,#10430,#10458,#10487,#10515,#10548));+#10234 = ORIENTED_EDGE('',*,*,#10029,.F.);+#10235 = ORIENTED_EDGE('',*,*,#10211,.T.);+#10236 = ORIENTED_EDGE('',*,*,#10237,.T.);+#10237 = EDGE_CURVE('',#10184,#10238,#10240,.T.);+#10238 = VERTEX_POINT('',#10239);+#10239 = CARTESIAN_POINT('',(1.34,-3.653021649751,0.704234328342));+#10240 = SURFACE_CURVE('',#10241,(#10246,#10253),.PCURVE_S1.);+#10241 = CIRCLE('',#10242,0.147);+#10242 = AXIS2_PLACEMENT_3D('',#10243,#10244,#10245);+#10243 = CARTESIAN_POINT('',(1.34,-3.52308092439,0.6355));+#10244 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#10245 = DIRECTION('',(0.,0.,1.));+#10246 = PCURVE('',#10053,#10247);+#10247 = DEFINITIONAL_REPRESENTATION('',(#10248),#10252);+#10248 = CIRCLE('',#10249,0.147);+#10249 = AXIS2_PLACEMENT_2D('',#10250,#10251);+#10250 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#10251 = DIRECTION('',(1.,0.));+#10252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10253 = PCURVE('',#10199,#10254);+#10254 = DEFINITIONAL_REPRESENTATION('',(#10255),#10259);+#10255 = LINE('',#10256,#10257);+#10256 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#10257 = VECTOR('',#10258,1.);+#10258 = DIRECTION('',(1.,-0.));+#10259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10260 = ORIENTED_EDGE('',*,*,#10261,.T.);+#10261 = EDGE_CURVE('',#10238,#10262,#10264,.T.);+#10262 = VERTEX_POINT('',#10263);+#10263 = CARTESIAN_POINT('',(1.34,-3.958168154079,0.127361620474));+#10264 = SURFACE_CURVE('',#10265,(#10269,#10276),.PCURVE_S1.);+#10265 = LINE('',#10266,#10267);+#10266 = CARTESIAN_POINT('',(1.34,-3.626407401915,0.754547974408));+#10267 = VECTOR('',#10268,1.);+#10268 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#10269 = PCURVE('',#10053,#10270);+#10270 = DEFINITIONAL_REPRESENTATION('',(#10271),#10275);+#10271 = LINE('',#10272,#10273);+#10272 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#10273 = VECTOR('',#10274,1.);+#10274 = DIRECTION('',(-0.883950512662,0.467580464908));+#10275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10276 = PCURVE('',#10277,#10282);+#10277 = PLANE('',#10278);+#10278 = AXIS2_PLACEMENT_3D('',#10279,#10280,#10281);+#10279 = CARTESIAN_POINT('',(1.25,-3.653021649751,0.704234328342));+#10280 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908+ ));+#10281 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#10282 = DEFINITIONAL_REPRESENTATION('',(#10283),#10287);+#10283 = LINE('',#10284,#10285);+#10284 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#10285 = VECTOR('',#10286,1.);+#10286 = DIRECTION('',(1.,-2.399596746007E-32));+#10287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10288 = ORIENTED_EDGE('',*,*,#10289,.F.);+#10289 = EDGE_CURVE('',#10290,#10262,#10292,.T.);+#10290 = VERTEX_POINT('',#10291);+#10291 = CARTESIAN_POINT('',(1.34,-3.99529407561,0.105));+#10292 = SURFACE_CURVE('',#10293,(#10298,#10305),.PCURVE_S1.);+#10293 = CIRCLE('',#10294,4.2E-02);+#10294 = AXIS2_PLACEMENT_3D('',#10295,#10296,#10297);+#10295 = CARTESIAN_POINT('',(1.34,-3.99529407561,0.147));+#10296 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#10297 = DIRECTION('',(0.,0.,1.));+#10298 = PCURVE('',#10053,#10299);+#10299 = DEFINITIONAL_REPRESENTATION('',(#10300),#10304);+#10300 = CIRCLE('',#10301,4.2E-02);+#10301 = AXIS2_PLACEMENT_2D('',#10302,#10303);+#10302 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#10303 = DIRECTION('',(1.,0.));+#10304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10305 = PCURVE('',#10306,#10311);+#10306 = CYLINDRICAL_SURFACE('',#10307,4.2E-02);+#10307 = AXIS2_PLACEMENT_3D('',#10308,#10309,#10310);+#10308 = CARTESIAN_POINT('',(1.25,-3.99529407561,0.147));+#10309 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10310 = DIRECTION('',(0.,0.,1.));+#10311 = DEFINITIONAL_REPRESENTATION('',(#10312),#10316);+#10312 = LINE('',#10313,#10314);+#10313 = CARTESIAN_POINT('',(-0.,9.E-02));+#10314 = VECTOR('',#10315,1.);+#10315 = DIRECTION('',(1.,-0.));+#10316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10317 = ORIENTED_EDGE('',*,*,#10318,.T.);+#10318 = EDGE_CURVE('',#10290,#10319,#10321,.T.);+#10319 = VERTEX_POINT('',#10320);+#10320 = CARTESIAN_POINT('',(1.34,-4.43,0.105));+#10321 = SURFACE_CURVE('',#10322,(#10326,#10333),.PCURVE_S1.);+#10322 = LINE('',#10323,#10324);+#10323 = CARTESIAN_POINT('',(1.34,-3.938375,0.105));+#10324 = VECTOR('',#10325,1.);+#10325 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10326 = PCURVE('',#10053,#10327);+#10327 = DEFINITIONAL_REPRESENTATION('',(#10328),#10332);+#10328 = LINE('',#10329,#10330);+#10329 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#10330 = VECTOR('',#10331,1.);+#10331 = DIRECTION('',(0.,1.));+#10332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10333 = PCURVE('',#10334,#10339);+#10334 = PLANE('',#10335);+#10335 = AXIS2_PLACEMENT_3D('',#10336,#10337,#10338);+#10336 = CARTESIAN_POINT('',(1.25,-3.99529407561,0.105));+#10337 = DIRECTION('',(0.,0.,1.));+#10338 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10339 = DEFINITIONAL_REPRESENTATION('',(#10340),#10344);+#10340 = LINE('',#10341,#10342);+#10341 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#10342 = VECTOR('',#10343,1.);+#10343 = DIRECTION('',(1.,0.));+#10344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10345 = ORIENTED_EDGE('',*,*,#10346,.T.);+#10346 = EDGE_CURVE('',#10319,#10347,#10349,.T.);+#10347 = VERTEX_POINT('',#10348);+#10348 = CARTESIAN_POINT('',(1.34,-4.43,0.));+#10349 = SURFACE_CURVE('',#10350,(#10354,#10361),.PCURVE_S1.);+#10350 = LINE('',#10351,#10352);+#10351 = CARTESIAN_POINT('',(1.34,-4.43,-8.142959240193E-02));+#10352 = VECTOR('',#10353,1.);+#10353 = DIRECTION('',(0.,0.,-1.));+#10354 = PCURVE('',#10053,#10355);+#10355 = DEFINITIONAL_REPRESENTATION('',(#10356),#10360);+#10356 = LINE('',#10357,#10358);+#10357 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#10358 = VECTOR('',#10359,1.);+#10359 = DIRECTION('',(-1.,0.));+#10360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10361 = PCURVE('',#10362,#10367);+#10362 = PLANE('',#10363);+#10363 = AXIS2_PLACEMENT_3D('',#10364,#10365,#10366);+#10364 = CARTESIAN_POINT('',(0.66,-4.43,-0.5));+#10365 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10366 = DIRECTION('',(0.,0.,1.));+#10367 = DEFINITIONAL_REPRESENTATION('',(#10368),#10372);+#10368 = LINE('',#10369,#10370);+#10369 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#10370 = VECTOR('',#10371,1.);+#10371 = DIRECTION('',(-1.,-0.));+#10372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10373 = ORIENTED_EDGE('',*,*,#10374,.F.);+#10374 = EDGE_CURVE('',#10375,#10347,#10377,.T.);+#10375 = VERTEX_POINT('',#10376);+#10376 = CARTESIAN_POINT('',(1.34,-3.99529407561,0.));+#10377 = SURFACE_CURVE('',#10378,(#10382,#10389),.PCURVE_S1.);+#10378 = LINE('',#10379,#10380);+#10379 = CARTESIAN_POINT('',(1.34,-3.938375,0.));+#10380 = VECTOR('',#10381,1.);+#10381 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10382 = PCURVE('',#10053,#10383);+#10383 = DEFINITIONAL_REPRESENTATION('',(#10384),#10388);+#10384 = LINE('',#10385,#10386);+#10385 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#10386 = VECTOR('',#10387,1.);+#10387 = DIRECTION('',(0.,1.));+#10388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10389 = PCURVE('',#10390,#10395);+#10390 = PLANE('',#10391);+#10391 = AXIS2_PLACEMENT_3D('',#10392,#10393,#10394);+#10392 = CARTESIAN_POINT('',(1.25,-3.99529407561,0.));+#10393 = DIRECTION('',(0.,0.,1.));+#10394 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10395 = DEFINITIONAL_REPRESENTATION('',(#10396),#10400);+#10396 = LINE('',#10397,#10398);+#10397 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#10398 = VECTOR('',#10399,1.);+#10399 = DIRECTION('',(1.,0.));+#10400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10401 = ORIENTED_EDGE('',*,*,#10402,.T.);+#10402 = EDGE_CURVE('',#10375,#10403,#10405,.T.);+#10403 = VERTEX_POINT('',#10404);+#10404 = CARTESIAN_POINT('',(1.34,-3.865353350249,7.826567165848E-02));+#10405 = SURFACE_CURVE('',#10406,(#10411,#10418),.PCURVE_S1.);+#10406 = CIRCLE('',#10407,0.147);+#10407 = AXIS2_PLACEMENT_3D('',#10408,#10409,#10410);+#10408 = CARTESIAN_POINT('',(1.34,-3.99529407561,0.147));+#10409 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#10410 = DIRECTION('',(0.,0.,1.));+#10411 = PCURVE('',#10053,#10412);+#10412 = DEFINITIONAL_REPRESENTATION('',(#10413),#10417);+#10413 = CIRCLE('',#10414,0.147);+#10414 = AXIS2_PLACEMENT_2D('',#10415,#10416);+#10415 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#10416 = DIRECTION('',(1.,0.));+#10417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10418 = PCURVE('',#10419,#10424);+#10419 = CYLINDRICAL_SURFACE('',#10420,0.147);+#10420 = AXIS2_PLACEMENT_3D('',#10421,#10422,#10423);+#10421 = CARTESIAN_POINT('',(1.25,-3.99529407561,0.147));+#10422 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10423 = DIRECTION('',(0.,0.,1.));+#10424 = DEFINITIONAL_REPRESENTATION('',(#10425),#10429);+#10425 = LINE('',#10426,#10427);+#10426 = CARTESIAN_POINT('',(-0.,9.E-02));+#10427 = VECTOR('',#10428,1.);+#10428 = DIRECTION('',(1.,-0.));+#10429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10430 = ORIENTED_EDGE('',*,*,#10431,.F.);+#10431 = EDGE_CURVE('',#10432,#10403,#10434,.T.);+#10432 = VERTEX_POINT('',#10433);+#10433 = CARTESIAN_POINT('',(1.34,-3.560206845921,0.655138379526));+#10434 = SURFACE_CURVE('',#10435,(#10439,#10446),.PCURVE_S1.);+#10435 = LINE('',#10436,#10437);+#10436 = CARTESIAN_POINT('',(1.34,-3.533592598085,0.705452025592));+#10437 = VECTOR('',#10438,1.);+#10438 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#10439 = PCURVE('',#10053,#10440);+#10440 = DEFINITIONAL_REPRESENTATION('',(#10441),#10445);+#10441 = LINE('',#10442,#10443);+#10442 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#10443 = VECTOR('',#10444,1.);+#10444 = DIRECTION('',(-0.883950512662,0.467580464908));+#10445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10446 = PCURVE('',#10447,#10452);+#10447 = PLANE('',#10448);+#10448 = AXIS2_PLACEMENT_3D('',#10449,#10450,#10451);+#10449 = CARTESIAN_POINT('',(1.25,-3.560206845921,0.655138379526));+#10450 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908+ ));+#10451 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#10452 = DEFINITIONAL_REPRESENTATION('',(#10453),#10457);+#10453 = LINE('',#10454,#10455);+#10454 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#10455 = VECTOR('',#10456,1.);+#10456 = DIRECTION('',(1.,-2.399596746007E-32));+#10457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10458 = ORIENTED_EDGE('',*,*,#10459,.F.);+#10459 = EDGE_CURVE('',#10460,#10432,#10462,.T.);+#10460 = VERTEX_POINT('',#10461);+#10461 = CARTESIAN_POINT('',(1.34,-3.52308092439,0.6775));+#10462 = SURFACE_CURVE('',#10463,(#10468,#10475),.PCURVE_S1.);+#10463 = CIRCLE('',#10464,4.2E-02);+#10464 = AXIS2_PLACEMENT_3D('',#10465,#10466,#10467);+#10465 = CARTESIAN_POINT('',(1.34,-3.52308092439,0.6355));+#10466 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#10467 = DIRECTION('',(0.,0.,1.));+#10468 = PCURVE('',#10053,#10469);+#10469 = DEFINITIONAL_REPRESENTATION('',(#10470),#10474);+#10470 = CIRCLE('',#10471,4.2E-02);+#10471 = AXIS2_PLACEMENT_2D('',#10472,#10473);+#10472 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#10473 = DIRECTION('',(1.,0.));+#10474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10475 = PCURVE('',#10476,#10481);+#10476 = CYLINDRICAL_SURFACE('',#10477,4.2E-02);+#10477 = AXIS2_PLACEMENT_3D('',#10478,#10479,#10480);+#10478 = CARTESIAN_POINT('',(1.25,-3.52308092439,0.6355));+#10479 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10480 = DIRECTION('',(0.,0.,1.));+#10481 = DEFINITIONAL_REPRESENTATION('',(#10482),#10486);+#10482 = LINE('',#10483,#10484);+#10483 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#10484 = VECTOR('',#10485,1.);+#10485 = DIRECTION('',(1.,-0.));+#10486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10487 = ORIENTED_EDGE('',*,*,#10488,.F.);+#10488 = EDGE_CURVE('',#10489,#10460,#10491,.T.);+#10489 = VERTEX_POINT('',#10490);+#10490 = CARTESIAN_POINT('',(1.34,-3.25,0.6775));+#10491 = SURFACE_CURVE('',#10492,(#10496,#10503),.PCURVE_S1.);+#10492 = LINE('',#10493,#10494);+#10493 = CARTESIAN_POINT('',(1.34,-3.25,0.6775));+#10494 = VECTOR('',#10495,1.);+#10495 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10496 = PCURVE('',#10053,#10497);+#10497 = DEFINITIONAL_REPRESENTATION('',(#10498),#10502);+#10498 = LINE('',#10499,#10500);+#10499 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#10500 = VECTOR('',#10501,1.);+#10501 = DIRECTION('',(0.,1.));+#10502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10503 = PCURVE('',#10504,#10509);+#10504 = PLANE('',#10505);+#10505 = AXIS2_PLACEMENT_3D('',#10506,#10507,#10508);+#10506 = CARTESIAN_POINT('',(1.25,-3.25,0.6775));+#10507 = DIRECTION('',(0.,0.,1.));+#10508 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10509 = DEFINITIONAL_REPRESENTATION('',(#10510),#10514);+#10510 = LINE('',#10511,#10512);+#10511 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#10512 = VECTOR('',#10513,1.);+#10513 = DIRECTION('',(1.,0.));+#10514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10515 = ORIENTED_EDGE('',*,*,#10516,.F.);+#10516 = EDGE_CURVE('',#10517,#10489,#10519,.T.);+#10517 = VERTEX_POINT('',#10518);+#10518 = CARTESIAN_POINT('',(1.34,-3.2,0.713992189406));+#10519 = SURFACE_CURVE('',#10520,(#10525,#10536),.PCURVE_S1.);+#10520 = CIRCLE('',#10521,5.25E-02);+#10521 = AXIS2_PLACEMENT_3D('',#10522,#10523,#10524);+#10522 = CARTESIAN_POINT('',(1.34,-3.25,0.73));+#10523 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#10524 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10525 = PCURVE('',#10053,#10526);+#10526 = DEFINITIONAL_REPRESENTATION('',(#10527),#10535);+#10527 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10528,#10529,#10530,#10531+ ,#10532,#10533,#10534),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10528 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#10529 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#10530 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#10531 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#10532 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#10533 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#10534 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#10535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10536 = PCURVE('',#10537,#10542);+#10537 = CYLINDRICAL_SURFACE('',#10538,5.25E-02);+#10538 = AXIS2_PLACEMENT_3D('',#10539,#10540,#10541);+#10539 = CARTESIAN_POINT('',(1.25,-3.25,0.73));+#10540 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10541 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10542 = DEFINITIONAL_REPRESENTATION('',(#10543),#10547);+#10543 = LINE('',#10544,#10545);+#10544 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#10545 = VECTOR('',#10546,1.);+#10546 = DIRECTION('',(-1.,-0.));+#10547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10548 = ORIENTED_EDGE('',*,*,#10549,.F.);+#10549 = EDGE_CURVE('',#10032,#10517,#10550,.T.);+#10550 = SURFACE_CURVE('',#10551,(#10555,#10562),.PCURVE_S1.);+#10551 = LINE('',#10552,#10553);+#10552 = CARTESIAN_POINT('',(1.34,-3.2,-8.142959240193E-02));+#10553 = VECTOR('',#10554,1.);+#10554 = DIRECTION('',(0.,0.,-1.));+#10555 = PCURVE('',#10053,#10556);+#10556 = DEFINITIONAL_REPRESENTATION('',(#10557),#10561);+#10557 = LINE('',#10558,#10559);+#10558 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#10559 = VECTOR('',#10560,1.);+#10560 = DIRECTION('',(-1.,0.));+#10561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10562 = PCURVE('',#10085,#10563);+#10563 = DEFINITIONAL_REPRESENTATION('',(#10564),#10568);+#10564 = LINE('',#10565,#10566);+#10565 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#10566 = VECTOR('',#10567,1.);+#10567 = DIRECTION('',(-1.,-0.));+#10568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10569 = ADVANCED_FACE('',(#10570),#10085,.F.);+#10570 = FACE_BOUND('',#10571,.F.);+#10571 = EDGE_LOOP('',(#10572,#10573,#10596,#10617));+#10572 = ORIENTED_EDGE('',*,*,#10069,.F.);+#10573 = ORIENTED_EDGE('',*,*,#10574,.T.);+#10574 = EDGE_CURVE('',#10070,#10575,#10577,.T.);+#10575 = VERTEX_POINT('',#10576);+#10576 = CARTESIAN_POINT('',(1.16,-3.2,0.713992189406));+#10577 = SURFACE_CURVE('',#10578,(#10582,#10589),.PCURVE_S1.);+#10578 = LINE('',#10579,#10580);+#10579 = CARTESIAN_POINT('',(1.16,-3.2,-8.142959240193E-02));+#10580 = VECTOR('',#10581,1.);+#10581 = DIRECTION('',(0.,0.,-1.));+#10582 = PCURVE('',#10085,#10583);+#10583 = DEFINITIONAL_REPRESENTATION('',(#10584),#10588);+#10584 = LINE('',#10585,#10586);+#10585 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#10586 = VECTOR('',#10587,1.);+#10587 = DIRECTION('',(-1.,-0.));+#10588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10589 = PCURVE('',#10114,#10590);+#10590 = DEFINITIONAL_REPRESENTATION('',(#10591),#10595);+#10591 = LINE('',#10592,#10593);+#10592 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#10593 = VECTOR('',#10594,1.);+#10594 = DIRECTION('',(-1.,0.));+#10595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10596 = ORIENTED_EDGE('',*,*,#10597,.T.);+#10597 = EDGE_CURVE('',#10575,#10517,#10598,.T.);+#10598 = SURFACE_CURVE('',#10599,(#10603,#10610),.PCURVE_S1.);+#10599 = LINE('',#10600,#10601);+#10600 = CARTESIAN_POINT('',(1.25,-3.2,0.713992189406));+#10601 = VECTOR('',#10602,1.);+#10602 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10603 = PCURVE('',#10085,#10604);+#10604 = DEFINITIONAL_REPRESENTATION('',(#10605),#10609);+#10605 = LINE('',#10606,#10607);+#10606 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#10607 = VECTOR('',#10608,1.);+#10608 = DIRECTION('',(0.,-1.));+#10609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10610 = PCURVE('',#10537,#10611);+#10611 = DEFINITIONAL_REPRESENTATION('',(#10612),#10616);+#10612 = LINE('',#10613,#10614);+#10613 = CARTESIAN_POINT('',(2.831748013849,0.));+#10614 = VECTOR('',#10615,1.);+#10615 = DIRECTION('',(-0.,1.));+#10616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10617 = ORIENTED_EDGE('',*,*,#10549,.F.);+#10618 = ADVANCED_FACE('',(#10619),#10114,.F.);+#10619 = FACE_BOUND('',#10620,.F.);+#10620 = EDGE_LOOP('',(#10621,#10622,#10623,#10647,#10670,#10694,#10717,+ #10740,#10763,#10787,#10810,#10834,#10857,#10883));+#10621 = ORIENTED_EDGE('',*,*,#10097,.F.);+#10622 = ORIENTED_EDGE('',*,*,#10160,.T.);+#10623 = ORIENTED_EDGE('',*,*,#10624,.T.);+#10624 = EDGE_CURVE('',#10161,#10625,#10627,.T.);+#10625 = VERTEX_POINT('',#10626);+#10626 = CARTESIAN_POINT('',(1.16,-3.653021649751,0.704234328342));+#10627 = SURFACE_CURVE('',#10628,(#10633,#10640),.PCURVE_S1.);+#10628 = CIRCLE('',#10629,0.147);+#10629 = AXIS2_PLACEMENT_3D('',#10630,#10631,#10632);+#10630 = CARTESIAN_POINT('',(1.16,-3.52308092439,0.6355));+#10631 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#10632 = DIRECTION('',(0.,0.,1.));+#10633 = PCURVE('',#10114,#10634);+#10634 = DEFINITIONAL_REPRESENTATION('',(#10635),#10639);+#10635 = CIRCLE('',#10636,0.147);+#10636 = AXIS2_PLACEMENT_2D('',#10637,#10638);+#10637 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#10638 = DIRECTION('',(1.,0.));+#10639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10640 = PCURVE('',#10199,#10641);+#10641 = DEFINITIONAL_REPRESENTATION('',(#10642),#10646);+#10642 = LINE('',#10643,#10644);+#10643 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#10644 = VECTOR('',#10645,1.);+#10645 = DIRECTION('',(1.,0.));+#10646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10647 = ORIENTED_EDGE('',*,*,#10648,.T.);+#10648 = EDGE_CURVE('',#10625,#10649,#10651,.T.);+#10649 = VERTEX_POINT('',#10650);+#10650 = CARTESIAN_POINT('',(1.16,-3.958168154079,0.127361620474));+#10651 = SURFACE_CURVE('',#10652,(#10656,#10663),.PCURVE_S1.);+#10652 = LINE('',#10653,#10654);+#10653 = CARTESIAN_POINT('',(1.16,-3.626407401915,0.754547974408));+#10654 = VECTOR('',#10655,1.);+#10655 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#10656 = PCURVE('',#10114,#10657);+#10657 = DEFINITIONAL_REPRESENTATION('',(#10658),#10662);+#10658 = LINE('',#10659,#10660);+#10659 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#10660 = VECTOR('',#10661,1.);+#10661 = DIRECTION('',(-0.883950512662,0.467580464908));+#10662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10663 = PCURVE('',#10277,#10664);+#10664 = DEFINITIONAL_REPRESENTATION('',(#10665),#10669);+#10665 = LINE('',#10666,#10667);+#10666 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#10667 = VECTOR('',#10668,1.);+#10668 = DIRECTION('',(1.,-2.399596746007E-32));+#10669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10670 = ORIENTED_EDGE('',*,*,#10671,.F.);+#10671 = EDGE_CURVE('',#10672,#10649,#10674,.T.);+#10672 = VERTEX_POINT('',#10673);+#10673 = CARTESIAN_POINT('',(1.16,-3.99529407561,0.105));+#10674 = SURFACE_CURVE('',#10675,(#10680,#10687),.PCURVE_S1.);+#10675 = CIRCLE('',#10676,4.2E-02);+#10676 = AXIS2_PLACEMENT_3D('',#10677,#10678,#10679);+#10677 = CARTESIAN_POINT('',(1.16,-3.99529407561,0.147));+#10678 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#10679 = DIRECTION('',(0.,0.,1.));+#10680 = PCURVE('',#10114,#10681);+#10681 = DEFINITIONAL_REPRESENTATION('',(#10682),#10686);+#10682 = CIRCLE('',#10683,4.2E-02);+#10683 = AXIS2_PLACEMENT_2D('',#10684,#10685);+#10684 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#10685 = DIRECTION('',(1.,0.));+#10686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10687 = PCURVE('',#10306,#10688);+#10688 = DEFINITIONAL_REPRESENTATION('',(#10689),#10693);+#10689 = LINE('',#10690,#10691);+#10690 = CARTESIAN_POINT('',(0.,-9.E-02));+#10691 = VECTOR('',#10692,1.);+#10692 = DIRECTION('',(1.,0.));+#10693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10694 = ORIENTED_EDGE('',*,*,#10695,.T.);+#10695 = EDGE_CURVE('',#10672,#10696,#10698,.T.);+#10696 = VERTEX_POINT('',#10697);+#10697 = CARTESIAN_POINT('',(1.16,-4.43,0.105));+#10698 = SURFACE_CURVE('',#10699,(#10703,#10710),.PCURVE_S1.);+#10699 = LINE('',#10700,#10701);+#10700 = CARTESIAN_POINT('',(1.16,-3.938375,0.105));+#10701 = VECTOR('',#10702,1.);+#10702 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10703 = PCURVE('',#10114,#10704);+#10704 = DEFINITIONAL_REPRESENTATION('',(#10705),#10709);+#10705 = LINE('',#10706,#10707);+#10706 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#10707 = VECTOR('',#10708,1.);+#10708 = DIRECTION('',(0.,1.));+#10709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10710 = PCURVE('',#10334,#10711);+#10711 = DEFINITIONAL_REPRESENTATION('',(#10712),#10716);+#10712 = LINE('',#10713,#10714);+#10713 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#10714 = VECTOR('',#10715,1.);+#10715 = DIRECTION('',(1.,0.));+#10716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10717 = ORIENTED_EDGE('',*,*,#10718,.T.);+#10718 = EDGE_CURVE('',#10696,#10719,#10721,.T.);+#10719 = VERTEX_POINT('',#10720);+#10720 = CARTESIAN_POINT('',(1.16,-4.43,0.));+#10721 = SURFACE_CURVE('',#10722,(#10726,#10733),.PCURVE_S1.);+#10722 = LINE('',#10723,#10724);+#10723 = CARTESIAN_POINT('',(1.16,-4.43,-8.142959240193E-02));+#10724 = VECTOR('',#10725,1.);+#10725 = DIRECTION('',(0.,0.,-1.));+#10726 = PCURVE('',#10114,#10727);+#10727 = DEFINITIONAL_REPRESENTATION('',(#10728),#10732);+#10728 = LINE('',#10729,#10730);+#10729 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#10730 = VECTOR('',#10731,1.);+#10731 = DIRECTION('',(-1.,0.));+#10732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10733 = PCURVE('',#10362,#10734);+#10734 = DEFINITIONAL_REPRESENTATION('',(#10735),#10739);+#10735 = LINE('',#10736,#10737);+#10736 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#10737 = VECTOR('',#10738,1.);+#10738 = DIRECTION('',(-1.,-0.));+#10739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10740 = ORIENTED_EDGE('',*,*,#10741,.F.);+#10741 = EDGE_CURVE('',#10742,#10719,#10744,.T.);+#10742 = VERTEX_POINT('',#10743);+#10743 = CARTESIAN_POINT('',(1.16,-3.99529407561,0.));+#10744 = SURFACE_CURVE('',#10745,(#10749,#10756),.PCURVE_S1.);+#10745 = LINE('',#10746,#10747);+#10746 = CARTESIAN_POINT('',(1.16,-3.938375,0.));+#10747 = VECTOR('',#10748,1.);+#10748 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10749 = PCURVE('',#10114,#10750);+#10750 = DEFINITIONAL_REPRESENTATION('',(#10751),#10755);+#10751 = LINE('',#10752,#10753);+#10752 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#10753 = VECTOR('',#10754,1.);+#10754 = DIRECTION('',(0.,1.));+#10755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10756 = PCURVE('',#10390,#10757);+#10757 = DEFINITIONAL_REPRESENTATION('',(#10758),#10762);+#10758 = LINE('',#10759,#10760);+#10759 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#10760 = VECTOR('',#10761,1.);+#10761 = DIRECTION('',(1.,0.));+#10762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10763 = ORIENTED_EDGE('',*,*,#10764,.T.);+#10764 = EDGE_CURVE('',#10742,#10765,#10767,.T.);+#10765 = VERTEX_POINT('',#10766);+#10766 = CARTESIAN_POINT('',(1.16,-3.865353350249,7.826567165848E-02));+#10767 = SURFACE_CURVE('',#10768,(#10773,#10780),.PCURVE_S1.);+#10768 = CIRCLE('',#10769,0.147);+#10769 = AXIS2_PLACEMENT_3D('',#10770,#10771,#10772);+#10770 = CARTESIAN_POINT('',(1.16,-3.99529407561,0.147));+#10771 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#10772 = DIRECTION('',(0.,0.,1.));+#10773 = PCURVE('',#10114,#10774);+#10774 = DEFINITIONAL_REPRESENTATION('',(#10775),#10779);+#10775 = CIRCLE('',#10776,0.147);+#10776 = AXIS2_PLACEMENT_2D('',#10777,#10778);+#10777 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#10778 = DIRECTION('',(1.,0.));+#10779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10780 = PCURVE('',#10419,#10781);+#10781 = DEFINITIONAL_REPRESENTATION('',(#10782),#10786);+#10782 = LINE('',#10783,#10784);+#10783 = CARTESIAN_POINT('',(0.,-9.E-02));+#10784 = VECTOR('',#10785,1.);+#10785 = DIRECTION('',(1.,0.));+#10786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10787 = ORIENTED_EDGE('',*,*,#10788,.F.);+#10788 = EDGE_CURVE('',#10789,#10765,#10791,.T.);+#10789 = VERTEX_POINT('',#10790);+#10790 = CARTESIAN_POINT('',(1.16,-3.560206845921,0.655138379526));+#10791 = SURFACE_CURVE('',#10792,(#10796,#10803),.PCURVE_S1.);+#10792 = LINE('',#10793,#10794);+#10793 = CARTESIAN_POINT('',(1.16,-3.533592598085,0.705452025592));+#10794 = VECTOR('',#10795,1.);+#10795 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#10796 = PCURVE('',#10114,#10797);+#10797 = DEFINITIONAL_REPRESENTATION('',(#10798),#10802);+#10798 = LINE('',#10799,#10800);+#10799 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#10800 = VECTOR('',#10801,1.);+#10801 = DIRECTION('',(-0.883950512662,0.467580464908));+#10802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10803 = PCURVE('',#10447,#10804);+#10804 = DEFINITIONAL_REPRESENTATION('',(#10805),#10809);+#10805 = LINE('',#10806,#10807);+#10806 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#10807 = VECTOR('',#10808,1.);+#10808 = DIRECTION('',(1.,-2.399596746007E-32));+#10809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10810 = ORIENTED_EDGE('',*,*,#10811,.F.);+#10811 = EDGE_CURVE('',#10812,#10789,#10814,.T.);+#10812 = VERTEX_POINT('',#10813);+#10813 = CARTESIAN_POINT('',(1.16,-3.52308092439,0.6775));+#10814 = SURFACE_CURVE('',#10815,(#10820,#10827),.PCURVE_S1.);+#10815 = CIRCLE('',#10816,4.2E-02);+#10816 = AXIS2_PLACEMENT_3D('',#10817,#10818,#10819);+#10817 = CARTESIAN_POINT('',(1.16,-3.52308092439,0.6355));+#10818 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#10819 = DIRECTION('',(0.,0.,1.));+#10820 = PCURVE('',#10114,#10821);+#10821 = DEFINITIONAL_REPRESENTATION('',(#10822),#10826);+#10822 = CIRCLE('',#10823,4.2E-02);+#10823 = AXIS2_PLACEMENT_2D('',#10824,#10825);+#10824 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#10825 = DIRECTION('',(1.,0.));+#10826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10827 = PCURVE('',#10476,#10828);+#10828 = DEFINITIONAL_REPRESENTATION('',(#10829),#10833);+#10829 = LINE('',#10830,#10831);+#10830 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#10831 = VECTOR('',#10832,1.);+#10832 = DIRECTION('',(1.,0.));+#10833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10834 = ORIENTED_EDGE('',*,*,#10835,.F.);+#10835 = EDGE_CURVE('',#10836,#10812,#10838,.T.);+#10836 = VERTEX_POINT('',#10837);+#10837 = CARTESIAN_POINT('',(1.16,-3.25,0.6775));+#10838 = SURFACE_CURVE('',#10839,(#10843,#10850),.PCURVE_S1.);+#10839 = LINE('',#10840,#10841);+#10840 = CARTESIAN_POINT('',(1.16,-3.25,0.6775));+#10841 = VECTOR('',#10842,1.);+#10842 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10843 = PCURVE('',#10114,#10844);+#10844 = DEFINITIONAL_REPRESENTATION('',(#10845),#10849);+#10845 = LINE('',#10846,#10847);+#10846 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#10847 = VECTOR('',#10848,1.);+#10848 = DIRECTION('',(0.,1.));+#10849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10850 = PCURVE('',#10504,#10851);+#10851 = DEFINITIONAL_REPRESENTATION('',(#10852),#10856);+#10852 = LINE('',#10853,#10854);+#10853 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#10854 = VECTOR('',#10855,1.);+#10855 = DIRECTION('',(1.,0.));+#10856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10857 = ORIENTED_EDGE('',*,*,#10858,.F.);+#10858 = EDGE_CURVE('',#10575,#10836,#10859,.T.);+#10859 = SURFACE_CURVE('',#10860,(#10865,#10876),.PCURVE_S1.);+#10860 = CIRCLE('',#10861,5.25E-02);+#10861 = AXIS2_PLACEMENT_3D('',#10862,#10863,#10864);+#10862 = CARTESIAN_POINT('',(1.16,-3.25,0.73));+#10863 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#10864 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#10865 = PCURVE('',#10114,#10866);+#10866 = DEFINITIONAL_REPRESENTATION('',(#10867),#10875);+#10867 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#10868,#10869,#10870,#10871+ ,#10872,#10873,#10874),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#10868 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#10869 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#10870 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#10871 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#10872 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#10873 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#10874 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#10875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10876 = PCURVE('',#10537,#10877);+#10877 = DEFINITIONAL_REPRESENTATION('',(#10878),#10882);+#10878 = LINE('',#10879,#10880);+#10879 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#10880 = VECTOR('',#10881,1.);+#10881 = DIRECTION('',(-1.,0.));+#10882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10883 = ORIENTED_EDGE('',*,*,#10574,.F.);+#10884 = ADVANCED_FACE('',(#10885),#10199,.T.);+#10885 = FACE_BOUND('',#10886,.T.);+#10886 = EDGE_LOOP('',(#10887,#10888,#10889,#10910));+#10887 = ORIENTED_EDGE('',*,*,#10183,.F.);+#10888 = ORIENTED_EDGE('',*,*,#10624,.T.);+#10889 = ORIENTED_EDGE('',*,*,#10890,.T.);+#10890 = EDGE_CURVE('',#10625,#10238,#10891,.T.);+#10891 = SURFACE_CURVE('',#10892,(#10896,#10903),.PCURVE_S1.);+#10892 = LINE('',#10893,#10894);+#10893 = CARTESIAN_POINT('',(1.16,-3.653021649751,0.704234328342));+#10894 = VECTOR('',#10895,1.);+#10895 = DIRECTION('',(1.,1.110223024625E-16,0.));+#10896 = PCURVE('',#10199,#10897);+#10897 = DEFINITIONAL_REPRESENTATION('',(#10898),#10902);+#10898 = LINE('',#10899,#10900);+#10899 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#10900 = VECTOR('',#10901,1.);+#10901 = DIRECTION('',(-0.,1.));+#10902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10903 = PCURVE('',#10277,#10904);+#10904 = DEFINITIONAL_REPRESENTATION('',(#10905),#10909);+#10905 = LINE('',#10906,#10907);+#10906 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#10907 = VECTOR('',#10908,1.);+#10908 = DIRECTION('',(4.767113258106E-29,1.));+#10909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10910 = ORIENTED_EDGE('',*,*,#10237,.F.);+#10911 = ADVANCED_FACE('',(#10912),#10537,.T.);+#10912 = FACE_BOUND('',#10913,.T.);+#10913 = EDGE_LOOP('',(#10914,#10915,#10936,#10937));+#10914 = ORIENTED_EDGE('',*,*,#10516,.T.);+#10915 = ORIENTED_EDGE('',*,*,#10916,.T.);+#10916 = EDGE_CURVE('',#10489,#10836,#10917,.T.);+#10917 = SURFACE_CURVE('',#10918,(#10922,#10929),.PCURVE_S1.);+#10918 = LINE('',#10919,#10920);+#10919 = CARTESIAN_POINT('',(1.34,-3.25,0.6775));+#10920 = VECTOR('',#10921,1.);+#10921 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#10922 = PCURVE('',#10537,#10923);+#10923 = DEFINITIONAL_REPRESENTATION('',(#10924),#10928);+#10924 = LINE('',#10925,#10926);+#10925 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#10926 = VECTOR('',#10927,1.);+#10927 = DIRECTION('',(-0.,-1.));+#10928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10929 = PCURVE('',#10504,#10930);+#10930 = DEFINITIONAL_REPRESENTATION('',(#10931),#10935);+#10931 = LINE('',#10932,#10933);+#10932 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#10933 = VECTOR('',#10934,1.);+#10934 = DIRECTION('',(0.,-1.));+#10935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10936 = ORIENTED_EDGE('',*,*,#10858,.F.);+#10937 = ORIENTED_EDGE('',*,*,#10597,.T.);+#10938 = ADVANCED_FACE('',(#10939),#10504,.F.);+#10939 = FACE_BOUND('',#10940,.F.);+#10940 = EDGE_LOOP('',(#10941,#10942,#10963,#10964));+#10941 = ORIENTED_EDGE('',*,*,#10835,.T.);+#10942 = ORIENTED_EDGE('',*,*,#10943,.F.);+#10943 = EDGE_CURVE('',#10460,#10812,#10944,.T.);+#10944 = SURFACE_CURVE('',#10945,(#10949,#10956),.PCURVE_S1.);+#10945 = LINE('',#10946,#10947);+#10946 = CARTESIAN_POINT('',(1.34,-3.52308092439,0.6775));+#10947 = VECTOR('',#10948,1.);+#10948 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#10949 = PCURVE('',#10504,#10950);+#10950 = DEFINITIONAL_REPRESENTATION('',(#10951),#10955);+#10951 = LINE('',#10952,#10953);+#10952 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#10953 = VECTOR('',#10954,1.);+#10954 = DIRECTION('',(0.,-1.));+#10955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10956 = PCURVE('',#10476,#10957);+#10957 = DEFINITIONAL_REPRESENTATION('',(#10958),#10962);+#10958 = LINE('',#10959,#10960);+#10959 = CARTESIAN_POINT('',(0.,9.E-02));+#10960 = VECTOR('',#10961,1.);+#10961 = DIRECTION('',(0.,-1.));+#10962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10963 = ORIENTED_EDGE('',*,*,#10488,.F.);+#10964 = ORIENTED_EDGE('',*,*,#10916,.T.);+#10965 = ADVANCED_FACE('',(#10966),#10476,.F.);+#10966 = FACE_BOUND('',#10967,.F.);+#10967 = EDGE_LOOP('',(#10968,#10969,#10990,#10991));+#10968 = ORIENTED_EDGE('',*,*,#10811,.T.);+#10969 = ORIENTED_EDGE('',*,*,#10970,.F.);+#10970 = EDGE_CURVE('',#10432,#10789,#10971,.T.);+#10971 = SURFACE_CURVE('',#10972,(#10976,#10983),.PCURVE_S1.);+#10972 = LINE('',#10973,#10974);+#10973 = CARTESIAN_POINT('',(1.34,-3.560206845921,0.655138379526));+#10974 = VECTOR('',#10975,1.);+#10975 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#10976 = PCURVE('',#10476,#10977);+#10977 = DEFINITIONAL_REPRESENTATION('',(#10978),#10982);+#10978 = LINE('',#10979,#10980);+#10979 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#10980 = VECTOR('',#10981,1.);+#10981 = DIRECTION('',(0.,-1.));+#10982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10983 = PCURVE('',#10447,#10984);+#10984 = DEFINITIONAL_REPRESENTATION('',(#10985),#10989);+#10985 = LINE('',#10986,#10987);+#10986 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#10987 = VECTOR('',#10988,1.);+#10988 = DIRECTION('',(-4.767113258106E-29,-1.));+#10989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10990 = ORIENTED_EDGE('',*,*,#10459,.F.);+#10991 = ORIENTED_EDGE('',*,*,#10943,.T.);+#10992 = ADVANCED_FACE('',(#10993),#10447,.F.);+#10993 = FACE_BOUND('',#10994,.F.);+#10994 = EDGE_LOOP('',(#10995,#10996,#11017,#11018));+#10995 = ORIENTED_EDGE('',*,*,#10788,.T.);+#10996 = ORIENTED_EDGE('',*,*,#10997,.F.);+#10997 = EDGE_CURVE('',#10403,#10765,#10998,.T.);+#10998 = SURFACE_CURVE('',#10999,(#11003,#11010),.PCURVE_S1.);+#10999 = LINE('',#11000,#11001);+#11000 = CARTESIAN_POINT('',(1.34,-3.865353350249,7.826567165848E-02));+#11001 = VECTOR('',#11002,1.);+#11002 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#11003 = PCURVE('',#10447,#11004);+#11004 = DEFINITIONAL_REPRESENTATION('',(#11005),#11009);+#11005 = LINE('',#11006,#11007);+#11006 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#11007 = VECTOR('',#11008,1.);+#11008 = DIRECTION('',(-4.767113258106E-29,-1.));+#11009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11010 = PCURVE('',#10419,#11011);+#11011 = DEFINITIONAL_REPRESENTATION('',(#11012),#11016);+#11012 = LINE('',#11013,#11014);+#11013 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#11014 = VECTOR('',#11015,1.);+#11015 = DIRECTION('',(0.,-1.));+#11016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11017 = ORIENTED_EDGE('',*,*,#10431,.F.);+#11018 = ORIENTED_EDGE('',*,*,#10970,.T.);+#11019 = ADVANCED_FACE('',(#11020),#10419,.T.);+#11020 = FACE_BOUND('',#11021,.T.);+#11021 = EDGE_LOOP('',(#11022,#11023,#11024,#11025));+#11022 = ORIENTED_EDGE('',*,*,#10764,.T.);+#11023 = ORIENTED_EDGE('',*,*,#10997,.F.);+#11024 = ORIENTED_EDGE('',*,*,#10402,.F.);+#11025 = ORIENTED_EDGE('',*,*,#11026,.T.);+#11026 = EDGE_CURVE('',#10375,#10742,#11027,.T.);+#11027 = SURFACE_CURVE('',#11028,(#11032,#11039),.PCURVE_S1.);+#11028 = LINE('',#11029,#11030);+#11029 = CARTESIAN_POINT('',(1.34,-3.99529407561,0.));+#11030 = VECTOR('',#11031,1.);+#11031 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#11032 = PCURVE('',#10419,#11033);+#11033 = DEFINITIONAL_REPRESENTATION('',(#11034),#11038);+#11034 = LINE('',#11035,#11036);+#11035 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#11036 = VECTOR('',#11037,1.);+#11037 = DIRECTION('',(0.,-1.));+#11038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11039 = PCURVE('',#10390,#11040);+#11040 = DEFINITIONAL_REPRESENTATION('',(#11041),#11045);+#11041 = LINE('',#11042,#11043);+#11042 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#11043 = VECTOR('',#11044,1.);+#11044 = DIRECTION('',(0.,-1.));+#11045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11046 = ADVANCED_FACE('',(#11047),#10390,.F.);+#11047 = FACE_BOUND('',#11048,.F.);+#11048 = EDGE_LOOP('',(#11049,#11050,#11051,#11072));+#11049 = ORIENTED_EDGE('',*,*,#11026,.T.);+#11050 = ORIENTED_EDGE('',*,*,#10741,.T.);+#11051 = ORIENTED_EDGE('',*,*,#11052,.T.);+#11052 = EDGE_CURVE('',#10719,#10347,#11053,.T.);+#11053 = SURFACE_CURVE('',#11054,(#11058,#11065),.PCURVE_S1.);+#11054 = LINE('',#11055,#11056);+#11055 = CARTESIAN_POINT('',(0.955,-4.43,0.));+#11056 = VECTOR('',#11057,1.);+#11057 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11058 = PCURVE('',#10390,#11059);+#11059 = DEFINITIONAL_REPRESENTATION('',(#11060),#11064);+#11060 = LINE('',#11061,#11062);+#11061 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#11062 = VECTOR('',#11063,1.);+#11063 = DIRECTION('',(0.,1.));+#11064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11065 = PCURVE('',#10362,#11066);+#11066 = DEFINITIONAL_REPRESENTATION('',(#11067),#11071);+#11067 = LINE('',#11068,#11069);+#11068 = CARTESIAN_POINT('',(0.5,-0.295));+#11069 = VECTOR('',#11070,1.);+#11070 = DIRECTION('',(0.,-1.));+#11071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11072 = ORIENTED_EDGE('',*,*,#10374,.F.);+#11073 = ADVANCED_FACE('',(#11074),#10362,.T.);+#11074 = FACE_BOUND('',#11075,.T.);+#11075 = EDGE_LOOP('',(#11076,#11077,#11098,#11099));+#11076 = ORIENTED_EDGE('',*,*,#10346,.F.);+#11077 = ORIENTED_EDGE('',*,*,#11078,.F.);+#11078 = EDGE_CURVE('',#10696,#10319,#11079,.T.);+#11079 = SURFACE_CURVE('',#11080,(#11084,#11091),.PCURVE_S1.);+#11080 = LINE('',#11081,#11082);+#11081 = CARTESIAN_POINT('',(0.955,-4.43,0.105));+#11082 = VECTOR('',#11083,1.);+#11083 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11084 = PCURVE('',#10362,#11085);+#11085 = DEFINITIONAL_REPRESENTATION('',(#11086),#11090);+#11086 = LINE('',#11087,#11088);+#11087 = CARTESIAN_POINT('',(0.605,-0.295));+#11088 = VECTOR('',#11089,1.);+#11089 = DIRECTION('',(0.,-1.));+#11090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11091 = PCURVE('',#10334,#11092);+#11092 = DEFINITIONAL_REPRESENTATION('',(#11093),#11097);+#11093 = LINE('',#11094,#11095);+#11094 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#11095 = VECTOR('',#11096,1.);+#11096 = DIRECTION('',(0.,1.));+#11097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11098 = ORIENTED_EDGE('',*,*,#10718,.T.);+#11099 = ORIENTED_EDGE('',*,*,#11052,.T.);+#11100 = ADVANCED_FACE('',(#11101),#10334,.T.);+#11101 = FACE_BOUND('',#11102,.T.);+#11102 = EDGE_LOOP('',(#11103,#11124,#11125,#11126));+#11103 = ORIENTED_EDGE('',*,*,#11104,.T.);+#11104 = EDGE_CURVE('',#10290,#10672,#11105,.T.);+#11105 = SURFACE_CURVE('',#11106,(#11110,#11117),.PCURVE_S1.);+#11106 = LINE('',#11107,#11108);+#11107 = CARTESIAN_POINT('',(1.34,-3.99529407561,0.105));+#11108 = VECTOR('',#11109,1.);+#11109 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#11110 = PCURVE('',#10334,#11111);+#11111 = DEFINITIONAL_REPRESENTATION('',(#11112),#11116);+#11112 = LINE('',#11113,#11114);+#11113 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#11114 = VECTOR('',#11115,1.);+#11115 = DIRECTION('',(0.,-1.));+#11116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11117 = PCURVE('',#10306,#11118);+#11118 = DEFINITIONAL_REPRESENTATION('',(#11119),#11123);+#11119 = LINE('',#11120,#11121);+#11120 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#11121 = VECTOR('',#11122,1.);+#11122 = DIRECTION('',(0.,-1.));+#11123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11124 = ORIENTED_EDGE('',*,*,#10695,.T.);+#11125 = ORIENTED_EDGE('',*,*,#11078,.T.);+#11126 = ORIENTED_EDGE('',*,*,#10318,.F.);+#11127 = ADVANCED_FACE('',(#11128),#10306,.F.);+#11128 = FACE_BOUND('',#11129,.F.);+#11129 = EDGE_LOOP('',(#11130,#11131,#11152,#11153));+#11130 = ORIENTED_EDGE('',*,*,#10671,.T.);+#11131 = ORIENTED_EDGE('',*,*,#11132,.F.);+#11132 = EDGE_CURVE('',#10262,#10649,#11133,.T.);+#11133 = SURFACE_CURVE('',#11134,(#11138,#11145),.PCURVE_S1.);+#11134 = LINE('',#11135,#11136);+#11135 = CARTESIAN_POINT('',(1.34,-3.958168154079,0.127361620474));+#11136 = VECTOR('',#11137,1.);+#11137 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#11138 = PCURVE('',#10306,#11139);+#11139 = DEFINITIONAL_REPRESENTATION('',(#11140),#11144);+#11140 = LINE('',#11141,#11142);+#11141 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#11142 = VECTOR('',#11143,1.);+#11143 = DIRECTION('',(0.,-1.));+#11144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11145 = PCURVE('',#10277,#11146);+#11146 = DEFINITIONAL_REPRESENTATION('',(#11147),#11151);+#11147 = LINE('',#11148,#11149);+#11148 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#11149 = VECTOR('',#11150,1.);+#11150 = DIRECTION('',(-4.767113258106E-29,-1.));+#11151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11152 = ORIENTED_EDGE('',*,*,#10289,.F.);+#11153 = ORIENTED_EDGE('',*,*,#11104,.T.);+#11154 = ADVANCED_FACE('',(#11155),#10277,.T.);+#11155 = FACE_BOUND('',#11156,.T.);+#11156 = EDGE_LOOP('',(#11157,#11158,#11159,#11160));+#11157 = ORIENTED_EDGE('',*,*,#10890,.F.);+#11158 = ORIENTED_EDGE('',*,*,#10648,.T.);+#11159 = ORIENTED_EDGE('',*,*,#11132,.F.);+#11160 = ORIENTED_EDGE('',*,*,#10261,.F.);+#11161 = MANIFOLD_SOLID_BREP('',#11162);+#11162 = CLOSED_SHELL('',(#11163,#11293,#11369,#11707,#11756,#12022,+ #12049,#12076,#12103,#12130,#12157,#12184,#12211,#12238,#12265,+ #12292));+#11163 = ADVANCED_FACE('',(#11164),#11179,.T.);+#11164 = FACE_BOUND('',#11165,.T.);+#11165 = EDGE_LOOP('',(#11166,#11206,#11234,#11267));+#11166 = ORIENTED_EDGE('',*,*,#11167,.T.);+#11167 = EDGE_CURVE('',#11168,#11170,#11172,.T.);+#11168 = VERTEX_POINT('',#11169);+#11169 = CARTESIAN_POINT('',(1.84,-3.25,0.7825));+#11170 = VERTEX_POINT('',#11171);+#11171 = CARTESIAN_POINT('',(1.84,-3.2,0.746007810594));+#11172 = SURFACE_CURVE('',#11173,(#11178,#11190),.PCURVE_S1.);+#11173 = CIRCLE('',#11174,5.25E-02);+#11174 = AXIS2_PLACEMENT_3D('',#11175,#11176,#11177);+#11175 = CARTESIAN_POINT('',(1.84,-3.25,0.73));+#11176 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#11177 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11178 = PCURVE('',#11179,#11184);+#11179 = CYLINDRICAL_SURFACE('',#11180,5.25E-02);+#11180 = AXIS2_PLACEMENT_3D('',#11181,#11182,#11183);+#11181 = CARTESIAN_POINT('',(1.75,-3.25,0.73));+#11182 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11183 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11184 = DEFINITIONAL_REPRESENTATION('',(#11185),#11189);+#11185 = LINE('',#11186,#11187);+#11186 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#11187 = VECTOR('',#11188,1.);+#11188 = DIRECTION('',(-1.,-0.));+#11189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11190 = PCURVE('',#11191,#11196);+#11191 = PLANE('',#11192);+#11192 = AXIS2_PLACEMENT_3D('',#11193,#11194,#11195);+#11193 = CARTESIAN_POINT('',(1.84,-3.861815252728,0.337140815196));+#11194 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11195 = DIRECTION('',(0.,0.,1.));+#11196 = DEFINITIONAL_REPRESENTATION('',(#11197),#11205);+#11197 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11198,#11199,#11200,#11201+ ,#11202,#11203,#11204),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11198 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#11199 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#11200 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#11201 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#11202 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#11203 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#11204 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#11205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11206 = ORIENTED_EDGE('',*,*,#11207,.F.);+#11207 = EDGE_CURVE('',#11208,#11170,#11210,.T.);+#11208 = VERTEX_POINT('',#11209);+#11209 = CARTESIAN_POINT('',(1.66,-3.2,0.746007810594));+#11210 = SURFACE_CURVE('',#11211,(#11215,#11222),.PCURVE_S1.);+#11211 = LINE('',#11212,#11213);+#11212 = CARTESIAN_POINT('',(1.75,-3.2,0.746007810594));+#11213 = VECTOR('',#11214,1.);+#11214 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11215 = PCURVE('',#11179,#11216);+#11216 = DEFINITIONAL_REPRESENTATION('',(#11217),#11221);+#11217 = LINE('',#11218,#11219);+#11218 = CARTESIAN_POINT('',(3.451437293332,0.));+#11219 = VECTOR('',#11220,1.);+#11220 = DIRECTION('',(-0.,1.));+#11221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11222 = PCURVE('',#11223,#11228);+#11223 = PLANE('',#11224);+#11224 = AXIS2_PLACEMENT_3D('',#11225,#11226,#11227);+#11225 = CARTESIAN_POINT('',(1.16,-3.2,-0.5));+#11226 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11227 = DIRECTION('',(0.,0.,1.));+#11228 = DEFINITIONAL_REPRESENTATION('',(#11229),#11233);+#11229 = LINE('',#11230,#11231);+#11230 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#11231 = VECTOR('',#11232,1.);+#11232 = DIRECTION('',(0.,-1.));+#11233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11234 = ORIENTED_EDGE('',*,*,#11235,.F.);+#11235 = EDGE_CURVE('',#11236,#11208,#11238,.T.);+#11236 = VERTEX_POINT('',#11237);+#11237 = CARTESIAN_POINT('',(1.66,-3.25,0.7825));+#11238 = SURFACE_CURVE('',#11239,(#11244,#11251),.PCURVE_S1.);+#11239 = CIRCLE('',#11240,5.25E-02);+#11240 = AXIS2_PLACEMENT_3D('',#11241,#11242,#11243);+#11241 = CARTESIAN_POINT('',(1.66,-3.25,0.73));+#11242 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#11243 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11244 = PCURVE('',#11179,#11245);+#11245 = DEFINITIONAL_REPRESENTATION('',(#11246),#11250);+#11246 = LINE('',#11247,#11248);+#11247 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#11248 = VECTOR('',#11249,1.);+#11249 = DIRECTION('',(-1.,0.));+#11250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11251 = PCURVE('',#11252,#11257);+#11252 = PLANE('',#11253);+#11253 = AXIS2_PLACEMENT_3D('',#11254,#11255,#11256);+#11254 = CARTESIAN_POINT('',(1.66,-3.861815252728,0.337140815196));+#11255 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11256 = DIRECTION('',(0.,0.,1.));+#11257 = DEFINITIONAL_REPRESENTATION('',(#11258),#11266);+#11258 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11259,#11260,#11261,#11262+ ,#11263,#11264,#11265),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11259 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#11260 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#11261 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#11262 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#11263 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#11264 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#11265 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#11266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11267 = ORIENTED_EDGE('',*,*,#11268,.T.);+#11268 = EDGE_CURVE('',#11236,#11168,#11269,.T.);+#11269 = SURFACE_CURVE('',#11270,(#11274,#11281),.PCURVE_S1.);+#11270 = LINE('',#11271,#11272);+#11271 = CARTESIAN_POINT('',(1.66,-3.25,0.7825));+#11272 = VECTOR('',#11273,1.);+#11273 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11274 = PCURVE('',#11179,#11275);+#11275 = DEFINITIONAL_REPRESENTATION('',(#11276),#11280);+#11276 = LINE('',#11277,#11278);+#11277 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#11278 = VECTOR('',#11279,1.);+#11279 = DIRECTION('',(0.,1.));+#11280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11281 = PCURVE('',#11282,#11287);+#11282 = PLANE('',#11283);+#11283 = AXIS2_PLACEMENT_3D('',#11284,#11285,#11286);+#11284 = CARTESIAN_POINT('',(1.75,-3.25,0.7825));+#11285 = DIRECTION('',(0.,0.,1.));+#11286 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11287 = DEFINITIONAL_REPRESENTATION('',(#11288),#11292);+#11288 = LINE('',#11289,#11290);+#11289 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#11290 = VECTOR('',#11291,1.);+#11291 = DIRECTION('',(0.,1.));+#11292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11293 = ADVANCED_FACE('',(#11294),#11282,.T.);+#11294 = FACE_BOUND('',#11295,.T.);+#11295 = EDGE_LOOP('',(#11296,#11297,#11320,#11348));+#11296 = ORIENTED_EDGE('',*,*,#11268,.F.);+#11297 = ORIENTED_EDGE('',*,*,#11298,.T.);+#11298 = EDGE_CURVE('',#11236,#11299,#11301,.T.);+#11299 = VERTEX_POINT('',#11300);+#11300 = CARTESIAN_POINT('',(1.66,-3.52308092439,0.7825));+#11301 = SURFACE_CURVE('',#11302,(#11306,#11313),.PCURVE_S1.);+#11302 = LINE('',#11303,#11304);+#11303 = CARTESIAN_POINT('',(1.66,-3.25,0.7825));+#11304 = VECTOR('',#11305,1.);+#11305 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11306 = PCURVE('',#11282,#11307);+#11307 = DEFINITIONAL_REPRESENTATION('',(#11308),#11312);+#11308 = LINE('',#11309,#11310);+#11309 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#11310 = VECTOR('',#11311,1.);+#11311 = DIRECTION('',(1.,0.));+#11312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11313 = PCURVE('',#11252,#11314);+#11314 = DEFINITIONAL_REPRESENTATION('',(#11315),#11319);+#11315 = LINE('',#11316,#11317);+#11316 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#11317 = VECTOR('',#11318,1.);+#11318 = DIRECTION('',(0.,1.));+#11319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11320 = ORIENTED_EDGE('',*,*,#11321,.T.);+#11321 = EDGE_CURVE('',#11299,#11322,#11324,.T.);+#11322 = VERTEX_POINT('',#11323);+#11323 = CARTESIAN_POINT('',(1.84,-3.52308092439,0.7825));+#11324 = SURFACE_CURVE('',#11325,(#11329,#11336),.PCURVE_S1.);+#11325 = LINE('',#11326,#11327);+#11326 = CARTESIAN_POINT('',(1.66,-3.52308092439,0.7825));+#11327 = VECTOR('',#11328,1.);+#11328 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11329 = PCURVE('',#11282,#11330);+#11330 = DEFINITIONAL_REPRESENTATION('',(#11331),#11335);+#11331 = LINE('',#11332,#11333);+#11332 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#11333 = VECTOR('',#11334,1.);+#11334 = DIRECTION('',(0.,1.));+#11335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11336 = PCURVE('',#11337,#11342);+#11337 = CYLINDRICAL_SURFACE('',#11338,0.147);+#11338 = AXIS2_PLACEMENT_3D('',#11339,#11340,#11341);+#11339 = CARTESIAN_POINT('',(1.75,-3.52308092439,0.6355));+#11340 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11341 = DIRECTION('',(0.,0.,1.));+#11342 = DEFINITIONAL_REPRESENTATION('',(#11343),#11347);+#11343 = LINE('',#11344,#11345);+#11344 = CARTESIAN_POINT('',(0.,-9.E-02));+#11345 = VECTOR('',#11346,1.);+#11346 = DIRECTION('',(-0.,1.));+#11347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11348 = ORIENTED_EDGE('',*,*,#11349,.F.);+#11349 = EDGE_CURVE('',#11168,#11322,#11350,.T.);+#11350 = SURFACE_CURVE('',#11351,(#11355,#11362),.PCURVE_S1.);+#11351 = LINE('',#11352,#11353);+#11352 = CARTESIAN_POINT('',(1.84,-3.25,0.7825));+#11353 = VECTOR('',#11354,1.);+#11354 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11355 = PCURVE('',#11282,#11356);+#11356 = DEFINITIONAL_REPRESENTATION('',(#11357),#11361);+#11357 = LINE('',#11358,#11359);+#11358 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#11359 = VECTOR('',#11360,1.);+#11360 = DIRECTION('',(1.,0.));+#11361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11362 = PCURVE('',#11191,#11363);+#11363 = DEFINITIONAL_REPRESENTATION('',(#11364),#11368);+#11364 = LINE('',#11365,#11366);+#11365 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#11366 = VECTOR('',#11367,1.);+#11367 = DIRECTION('',(0.,1.));+#11368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11369 = ADVANCED_FACE('',(#11370),#11191,.T.);+#11370 = FACE_BOUND('',#11371,.T.);+#11371 = EDGE_LOOP('',(#11372,#11373,#11374,#11398,#11426,#11455,#11483,+ #11511,#11539,#11568,#11596,#11625,#11653,#11686));+#11372 = ORIENTED_EDGE('',*,*,#11167,.F.);+#11373 = ORIENTED_EDGE('',*,*,#11349,.T.);+#11374 = ORIENTED_EDGE('',*,*,#11375,.T.);+#11375 = EDGE_CURVE('',#11322,#11376,#11378,.T.);+#11376 = VERTEX_POINT('',#11377);+#11377 = CARTESIAN_POINT('',(1.84,-3.653021649751,0.704234328342));+#11378 = SURFACE_CURVE('',#11379,(#11384,#11391),.PCURVE_S1.);+#11379 = CIRCLE('',#11380,0.147);+#11380 = AXIS2_PLACEMENT_3D('',#11381,#11382,#11383);+#11381 = CARTESIAN_POINT('',(1.84,-3.52308092439,0.6355));+#11382 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#11383 = DIRECTION('',(0.,0.,1.));+#11384 = PCURVE('',#11191,#11385);+#11385 = DEFINITIONAL_REPRESENTATION('',(#11386),#11390);+#11386 = CIRCLE('',#11387,0.147);+#11387 = AXIS2_PLACEMENT_2D('',#11388,#11389);+#11388 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#11389 = DIRECTION('',(1.,0.));+#11390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11391 = PCURVE('',#11337,#11392);+#11392 = DEFINITIONAL_REPRESENTATION('',(#11393),#11397);+#11393 = LINE('',#11394,#11395);+#11394 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#11395 = VECTOR('',#11396,1.);+#11396 = DIRECTION('',(1.,-0.));+#11397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11398 = ORIENTED_EDGE('',*,*,#11399,.T.);+#11399 = EDGE_CURVE('',#11376,#11400,#11402,.T.);+#11400 = VERTEX_POINT('',#11401);+#11401 = CARTESIAN_POINT('',(1.84,-3.958168154079,0.127361620474));+#11402 = SURFACE_CURVE('',#11403,(#11407,#11414),.PCURVE_S1.);+#11403 = LINE('',#11404,#11405);+#11404 = CARTESIAN_POINT('',(1.84,-3.626407401915,0.754547974408));+#11405 = VECTOR('',#11406,1.);+#11406 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#11407 = PCURVE('',#11191,#11408);+#11408 = DEFINITIONAL_REPRESENTATION('',(#11409),#11413);+#11409 = LINE('',#11410,#11411);+#11410 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#11411 = VECTOR('',#11412,1.);+#11412 = DIRECTION('',(-0.883950512662,0.467580464908));+#11413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11414 = PCURVE('',#11415,#11420);+#11415 = PLANE('',#11416);+#11416 = AXIS2_PLACEMENT_3D('',#11417,#11418,#11419);+#11417 = CARTESIAN_POINT('',(1.75,-3.653021649751,0.704234328342));+#11418 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908+ ));+#11419 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#11420 = DEFINITIONAL_REPRESENTATION('',(#11421),#11425);+#11421 = LINE('',#11422,#11423);+#11422 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#11423 = VECTOR('',#11424,1.);+#11424 = DIRECTION('',(1.,-2.399596746007E-32));+#11425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11426 = ORIENTED_EDGE('',*,*,#11427,.F.);+#11427 = EDGE_CURVE('',#11428,#11400,#11430,.T.);+#11428 = VERTEX_POINT('',#11429);+#11429 = CARTESIAN_POINT('',(1.84,-3.99529407561,0.105));+#11430 = SURFACE_CURVE('',#11431,(#11436,#11443),.PCURVE_S1.);+#11431 = CIRCLE('',#11432,4.2E-02);+#11432 = AXIS2_PLACEMENT_3D('',#11433,#11434,#11435);+#11433 = CARTESIAN_POINT('',(1.84,-3.99529407561,0.147));+#11434 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#11435 = DIRECTION('',(0.,0.,1.));+#11436 = PCURVE('',#11191,#11437);+#11437 = DEFINITIONAL_REPRESENTATION('',(#11438),#11442);+#11438 = CIRCLE('',#11439,4.2E-02);+#11439 = AXIS2_PLACEMENT_2D('',#11440,#11441);+#11440 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#11441 = DIRECTION('',(1.,0.));+#11442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11443 = PCURVE('',#11444,#11449);+#11444 = CYLINDRICAL_SURFACE('',#11445,4.2E-02);+#11445 = AXIS2_PLACEMENT_3D('',#11446,#11447,#11448);+#11446 = CARTESIAN_POINT('',(1.75,-3.99529407561,0.147));+#11447 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11448 = DIRECTION('',(0.,0.,1.));+#11449 = DEFINITIONAL_REPRESENTATION('',(#11450),#11454);+#11450 = LINE('',#11451,#11452);+#11451 = CARTESIAN_POINT('',(-0.,9.E-02));+#11452 = VECTOR('',#11453,1.);+#11453 = DIRECTION('',(1.,-0.));+#11454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11455 = ORIENTED_EDGE('',*,*,#11456,.T.);+#11456 = EDGE_CURVE('',#11428,#11457,#11459,.T.);+#11457 = VERTEX_POINT('',#11458);+#11458 = CARTESIAN_POINT('',(1.84,-4.43,0.105));+#11459 = SURFACE_CURVE('',#11460,(#11464,#11471),.PCURVE_S1.);+#11460 = LINE('',#11461,#11462);+#11461 = CARTESIAN_POINT('',(1.84,-3.938375,0.105));+#11462 = VECTOR('',#11463,1.);+#11463 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11464 = PCURVE('',#11191,#11465);+#11465 = DEFINITIONAL_REPRESENTATION('',(#11466),#11470);+#11466 = LINE('',#11467,#11468);+#11467 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#11468 = VECTOR('',#11469,1.);+#11469 = DIRECTION('',(0.,1.));+#11470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11471 = PCURVE('',#11472,#11477);+#11472 = PLANE('',#11473);+#11473 = AXIS2_PLACEMENT_3D('',#11474,#11475,#11476);+#11474 = CARTESIAN_POINT('',(1.75,-3.99529407561,0.105));+#11475 = DIRECTION('',(0.,0.,1.));+#11476 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11477 = DEFINITIONAL_REPRESENTATION('',(#11478),#11482);+#11478 = LINE('',#11479,#11480);+#11479 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#11480 = VECTOR('',#11481,1.);+#11481 = DIRECTION('',(1.,0.));+#11482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11483 = ORIENTED_EDGE('',*,*,#11484,.T.);+#11484 = EDGE_CURVE('',#11457,#11485,#11487,.T.);+#11485 = VERTEX_POINT('',#11486);+#11486 = CARTESIAN_POINT('',(1.84,-4.43,0.));+#11487 = SURFACE_CURVE('',#11488,(#11492,#11499),.PCURVE_S1.);+#11488 = LINE('',#11489,#11490);+#11489 = CARTESIAN_POINT('',(1.84,-4.43,-8.142959240193E-02));+#11490 = VECTOR('',#11491,1.);+#11491 = DIRECTION('',(0.,0.,-1.));+#11492 = PCURVE('',#11191,#11493);+#11493 = DEFINITIONAL_REPRESENTATION('',(#11494),#11498);+#11494 = LINE('',#11495,#11496);+#11495 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#11496 = VECTOR('',#11497,1.);+#11497 = DIRECTION('',(-1.,0.));+#11498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11499 = PCURVE('',#11500,#11505);+#11500 = PLANE('',#11501);+#11501 = AXIS2_PLACEMENT_3D('',#11502,#11503,#11504);+#11502 = CARTESIAN_POINT('',(1.16,-4.43,-0.5));+#11503 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11504 = DIRECTION('',(0.,0.,1.));+#11505 = DEFINITIONAL_REPRESENTATION('',(#11506),#11510);+#11506 = LINE('',#11507,#11508);+#11507 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#11508 = VECTOR('',#11509,1.);+#11509 = DIRECTION('',(-1.,-0.));+#11510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11511 = ORIENTED_EDGE('',*,*,#11512,.F.);+#11512 = EDGE_CURVE('',#11513,#11485,#11515,.T.);+#11513 = VERTEX_POINT('',#11514);+#11514 = CARTESIAN_POINT('',(1.84,-3.99529407561,0.));+#11515 = SURFACE_CURVE('',#11516,(#11520,#11527),.PCURVE_S1.);+#11516 = LINE('',#11517,#11518);+#11517 = CARTESIAN_POINT('',(1.84,-3.938375,0.));+#11518 = VECTOR('',#11519,1.);+#11519 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11520 = PCURVE('',#11191,#11521);+#11521 = DEFINITIONAL_REPRESENTATION('',(#11522),#11526);+#11522 = LINE('',#11523,#11524);+#11523 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#11524 = VECTOR('',#11525,1.);+#11525 = DIRECTION('',(0.,1.));+#11526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11527 = PCURVE('',#11528,#11533);+#11528 = PLANE('',#11529);+#11529 = AXIS2_PLACEMENT_3D('',#11530,#11531,#11532);+#11530 = CARTESIAN_POINT('',(1.75,-3.99529407561,0.));+#11531 = DIRECTION('',(0.,0.,1.));+#11532 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11533 = DEFINITIONAL_REPRESENTATION('',(#11534),#11538);+#11534 = LINE('',#11535,#11536);+#11535 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#11536 = VECTOR('',#11537,1.);+#11537 = DIRECTION('',(1.,0.));+#11538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11539 = ORIENTED_EDGE('',*,*,#11540,.T.);+#11540 = EDGE_CURVE('',#11513,#11541,#11543,.T.);+#11541 = VERTEX_POINT('',#11542);+#11542 = CARTESIAN_POINT('',(1.84,-3.865353350249,7.826567165848E-02));+#11543 = SURFACE_CURVE('',#11544,(#11549,#11556),.PCURVE_S1.);+#11544 = CIRCLE('',#11545,0.147);+#11545 = AXIS2_PLACEMENT_3D('',#11546,#11547,#11548);+#11546 = CARTESIAN_POINT('',(1.84,-3.99529407561,0.147));+#11547 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#11548 = DIRECTION('',(0.,0.,1.));+#11549 = PCURVE('',#11191,#11550);+#11550 = DEFINITIONAL_REPRESENTATION('',(#11551),#11555);+#11551 = CIRCLE('',#11552,0.147);+#11552 = AXIS2_PLACEMENT_2D('',#11553,#11554);+#11553 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#11554 = DIRECTION('',(1.,0.));+#11555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11556 = PCURVE('',#11557,#11562);+#11557 = CYLINDRICAL_SURFACE('',#11558,0.147);+#11558 = AXIS2_PLACEMENT_3D('',#11559,#11560,#11561);+#11559 = CARTESIAN_POINT('',(1.75,-3.99529407561,0.147));+#11560 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11561 = DIRECTION('',(0.,0.,1.));+#11562 = DEFINITIONAL_REPRESENTATION('',(#11563),#11567);+#11563 = LINE('',#11564,#11565);+#11564 = CARTESIAN_POINT('',(-0.,9.E-02));+#11565 = VECTOR('',#11566,1.);+#11566 = DIRECTION('',(1.,-0.));+#11567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11568 = ORIENTED_EDGE('',*,*,#11569,.F.);+#11569 = EDGE_CURVE('',#11570,#11541,#11572,.T.);+#11570 = VERTEX_POINT('',#11571);+#11571 = CARTESIAN_POINT('',(1.84,-3.560206845921,0.655138379526));+#11572 = SURFACE_CURVE('',#11573,(#11577,#11584),.PCURVE_S1.);+#11573 = LINE('',#11574,#11575);+#11574 = CARTESIAN_POINT('',(1.84,-3.533592598085,0.705452025592));+#11575 = VECTOR('',#11576,1.);+#11576 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#11577 = PCURVE('',#11191,#11578);+#11578 = DEFINITIONAL_REPRESENTATION('',(#11579),#11583);+#11579 = LINE('',#11580,#11581);+#11580 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#11581 = VECTOR('',#11582,1.);+#11582 = DIRECTION('',(-0.883950512662,0.467580464908));+#11583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11584 = PCURVE('',#11585,#11590);+#11585 = PLANE('',#11586);+#11586 = AXIS2_PLACEMENT_3D('',#11587,#11588,#11589);+#11587 = CARTESIAN_POINT('',(1.75,-3.560206845921,0.655138379526));+#11588 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908+ ));+#11589 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#11590 = DEFINITIONAL_REPRESENTATION('',(#11591),#11595);+#11591 = LINE('',#11592,#11593);+#11592 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#11593 = VECTOR('',#11594,1.);+#11594 = DIRECTION('',(1.,-2.399596746007E-32));+#11595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11596 = ORIENTED_EDGE('',*,*,#11597,.F.);+#11597 = EDGE_CURVE('',#11598,#11570,#11600,.T.);+#11598 = VERTEX_POINT('',#11599);+#11599 = CARTESIAN_POINT('',(1.84,-3.52308092439,0.6775));+#11600 = SURFACE_CURVE('',#11601,(#11606,#11613),.PCURVE_S1.);+#11601 = CIRCLE('',#11602,4.2E-02);+#11602 = AXIS2_PLACEMENT_3D('',#11603,#11604,#11605);+#11603 = CARTESIAN_POINT('',(1.84,-3.52308092439,0.6355));+#11604 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#11605 = DIRECTION('',(0.,0.,1.));+#11606 = PCURVE('',#11191,#11607);+#11607 = DEFINITIONAL_REPRESENTATION('',(#11608),#11612);+#11608 = CIRCLE('',#11609,4.2E-02);+#11609 = AXIS2_PLACEMENT_2D('',#11610,#11611);+#11610 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#11611 = DIRECTION('',(1.,0.));+#11612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11613 = PCURVE('',#11614,#11619);+#11614 = CYLINDRICAL_SURFACE('',#11615,4.2E-02);+#11615 = AXIS2_PLACEMENT_3D('',#11616,#11617,#11618);+#11616 = CARTESIAN_POINT('',(1.75,-3.52308092439,0.6355));+#11617 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11618 = DIRECTION('',(0.,0.,1.));+#11619 = DEFINITIONAL_REPRESENTATION('',(#11620),#11624);+#11620 = LINE('',#11621,#11622);+#11621 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#11622 = VECTOR('',#11623,1.);+#11623 = DIRECTION('',(1.,-0.));+#11624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11625 = ORIENTED_EDGE('',*,*,#11626,.F.);+#11626 = EDGE_CURVE('',#11627,#11598,#11629,.T.);+#11627 = VERTEX_POINT('',#11628);+#11628 = CARTESIAN_POINT('',(1.84,-3.25,0.6775));+#11629 = SURFACE_CURVE('',#11630,(#11634,#11641),.PCURVE_S1.);+#11630 = LINE('',#11631,#11632);+#11631 = CARTESIAN_POINT('',(1.84,-3.25,0.6775));+#11632 = VECTOR('',#11633,1.);+#11633 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11634 = PCURVE('',#11191,#11635);+#11635 = DEFINITIONAL_REPRESENTATION('',(#11636),#11640);+#11636 = LINE('',#11637,#11638);+#11637 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#11638 = VECTOR('',#11639,1.);+#11639 = DIRECTION('',(0.,1.));+#11640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11641 = PCURVE('',#11642,#11647);+#11642 = PLANE('',#11643);+#11643 = AXIS2_PLACEMENT_3D('',#11644,#11645,#11646);+#11644 = CARTESIAN_POINT('',(1.75,-3.25,0.6775));+#11645 = DIRECTION('',(0.,0.,1.));+#11646 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11647 = DEFINITIONAL_REPRESENTATION('',(#11648),#11652);+#11648 = LINE('',#11649,#11650);+#11649 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#11650 = VECTOR('',#11651,1.);+#11651 = DIRECTION('',(1.,0.));+#11652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11653 = ORIENTED_EDGE('',*,*,#11654,.F.);+#11654 = EDGE_CURVE('',#11655,#11627,#11657,.T.);+#11655 = VERTEX_POINT('',#11656);+#11656 = CARTESIAN_POINT('',(1.84,-3.2,0.713992189406));+#11657 = SURFACE_CURVE('',#11658,(#11663,#11674),.PCURVE_S1.);+#11658 = CIRCLE('',#11659,5.25E-02);+#11659 = AXIS2_PLACEMENT_3D('',#11660,#11661,#11662);+#11660 = CARTESIAN_POINT('',(1.84,-3.25,0.73));+#11661 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#11662 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11663 = PCURVE('',#11191,#11664);+#11664 = DEFINITIONAL_REPRESENTATION('',(#11665),#11673);+#11665 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#11666,#11667,#11668,#11669+ ,#11670,#11671,#11672),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#11666 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#11667 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#11668 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#11669 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#11670 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#11671 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#11672 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#11673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11674 = PCURVE('',#11675,#11680);+#11675 = CYLINDRICAL_SURFACE('',#11676,5.25E-02);+#11676 = AXIS2_PLACEMENT_3D('',#11677,#11678,#11679);+#11677 = CARTESIAN_POINT('',(1.75,-3.25,0.73));+#11678 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11679 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11680 = DEFINITIONAL_REPRESENTATION('',(#11681),#11685);+#11681 = LINE('',#11682,#11683);+#11682 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#11683 = VECTOR('',#11684,1.);+#11684 = DIRECTION('',(-1.,-0.));+#11685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11686 = ORIENTED_EDGE('',*,*,#11687,.F.);+#11687 = EDGE_CURVE('',#11170,#11655,#11688,.T.);+#11688 = SURFACE_CURVE('',#11689,(#11693,#11700),.PCURVE_S1.);+#11689 = LINE('',#11690,#11691);+#11690 = CARTESIAN_POINT('',(1.84,-3.2,-8.142959240193E-02));+#11691 = VECTOR('',#11692,1.);+#11692 = DIRECTION('',(0.,0.,-1.));+#11693 = PCURVE('',#11191,#11694);+#11694 = DEFINITIONAL_REPRESENTATION('',(#11695),#11699);+#11695 = LINE('',#11696,#11697);+#11696 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#11697 = VECTOR('',#11698,1.);+#11698 = DIRECTION('',(-1.,0.));+#11699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11700 = PCURVE('',#11223,#11701);+#11701 = DEFINITIONAL_REPRESENTATION('',(#11702),#11706);+#11702 = LINE('',#11703,#11704);+#11703 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#11704 = VECTOR('',#11705,1.);+#11705 = DIRECTION('',(-1.,-0.));+#11706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11707 = ADVANCED_FACE('',(#11708),#11223,.F.);+#11708 = FACE_BOUND('',#11709,.F.);+#11709 = EDGE_LOOP('',(#11710,#11711,#11734,#11755));+#11710 = ORIENTED_EDGE('',*,*,#11207,.F.);+#11711 = ORIENTED_EDGE('',*,*,#11712,.T.);+#11712 = EDGE_CURVE('',#11208,#11713,#11715,.T.);+#11713 = VERTEX_POINT('',#11714);+#11714 = CARTESIAN_POINT('',(1.66,-3.2,0.713992189406));+#11715 = SURFACE_CURVE('',#11716,(#11720,#11727),.PCURVE_S1.);+#11716 = LINE('',#11717,#11718);+#11717 = CARTESIAN_POINT('',(1.66,-3.2,-8.142959240193E-02));+#11718 = VECTOR('',#11719,1.);+#11719 = DIRECTION('',(0.,0.,-1.));+#11720 = PCURVE('',#11223,#11721);+#11721 = DEFINITIONAL_REPRESENTATION('',(#11722),#11726);+#11722 = LINE('',#11723,#11724);+#11723 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#11724 = VECTOR('',#11725,1.);+#11725 = DIRECTION('',(-1.,-0.));+#11726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11727 = PCURVE('',#11252,#11728);+#11728 = DEFINITIONAL_REPRESENTATION('',(#11729),#11733);+#11729 = LINE('',#11730,#11731);+#11730 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#11731 = VECTOR('',#11732,1.);+#11732 = DIRECTION('',(-1.,0.));+#11733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11734 = ORIENTED_EDGE('',*,*,#11735,.T.);+#11735 = EDGE_CURVE('',#11713,#11655,#11736,.T.);+#11736 = SURFACE_CURVE('',#11737,(#11741,#11748),.PCURVE_S1.);+#11737 = LINE('',#11738,#11739);+#11738 = CARTESIAN_POINT('',(1.75,-3.2,0.713992189406));+#11739 = VECTOR('',#11740,1.);+#11740 = DIRECTION('',(1.,1.110223024625E-16,0.));+#11741 = PCURVE('',#11223,#11742);+#11742 = DEFINITIONAL_REPRESENTATION('',(#11743),#11747);+#11743 = LINE('',#11744,#11745);+#11744 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#11745 = VECTOR('',#11746,1.);+#11746 = DIRECTION('',(0.,-1.));+#11747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11748 = PCURVE('',#11675,#11749);+#11749 = DEFINITIONAL_REPRESENTATION('',(#11750),#11754);+#11750 = LINE('',#11751,#11752);+#11751 = CARTESIAN_POINT('',(2.831748013849,0.));+#11752 = VECTOR('',#11753,1.);+#11753 = DIRECTION('',(-0.,1.));+#11754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11755 = ORIENTED_EDGE('',*,*,#11687,.F.);+#11756 = ADVANCED_FACE('',(#11757),#11252,.F.);+#11757 = FACE_BOUND('',#11758,.F.);+#11758 = EDGE_LOOP('',(#11759,#11760,#11761,#11785,#11808,#11832,#11855,+ #11878,#11901,#11925,#11948,#11972,#11995,#12021));+#11759 = ORIENTED_EDGE('',*,*,#11235,.F.);+#11760 = ORIENTED_EDGE('',*,*,#11298,.T.);+#11761 = ORIENTED_EDGE('',*,*,#11762,.T.);+#11762 = EDGE_CURVE('',#11299,#11763,#11765,.T.);+#11763 = VERTEX_POINT('',#11764);+#11764 = CARTESIAN_POINT('',(1.66,-3.653021649751,0.704234328342));+#11765 = SURFACE_CURVE('',#11766,(#11771,#11778),.PCURVE_S1.);+#11766 = CIRCLE('',#11767,0.147);+#11767 = AXIS2_PLACEMENT_3D('',#11768,#11769,#11770);+#11768 = CARTESIAN_POINT('',(1.66,-3.52308092439,0.6355));+#11769 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#11770 = DIRECTION('',(0.,0.,1.));+#11771 = PCURVE('',#11252,#11772);+#11772 = DEFINITIONAL_REPRESENTATION('',(#11773),#11777);+#11773 = CIRCLE('',#11774,0.147);+#11774 = AXIS2_PLACEMENT_2D('',#11775,#11776);+#11775 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#11776 = DIRECTION('',(1.,0.));+#11777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11778 = PCURVE('',#11337,#11779);+#11779 = DEFINITIONAL_REPRESENTATION('',(#11780),#11784);+#11780 = LINE('',#11781,#11782);+#11781 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#11782 = VECTOR('',#11783,1.);+#11783 = DIRECTION('',(1.,0.));+#11784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11785 = ORIENTED_EDGE('',*,*,#11786,.T.);+#11786 = EDGE_CURVE('',#11763,#11787,#11789,.T.);+#11787 = VERTEX_POINT('',#11788);+#11788 = CARTESIAN_POINT('',(1.66,-3.958168154079,0.127361620474));+#11789 = SURFACE_CURVE('',#11790,(#11794,#11801),.PCURVE_S1.);+#11790 = LINE('',#11791,#11792);+#11791 = CARTESIAN_POINT('',(1.66,-3.626407401915,0.754547974408));+#11792 = VECTOR('',#11793,1.);+#11793 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#11794 = PCURVE('',#11252,#11795);+#11795 = DEFINITIONAL_REPRESENTATION('',(#11796),#11800);+#11796 = LINE('',#11797,#11798);+#11797 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#11798 = VECTOR('',#11799,1.);+#11799 = DIRECTION('',(-0.883950512662,0.467580464908));+#11800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11801 = PCURVE('',#11415,#11802);+#11802 = DEFINITIONAL_REPRESENTATION('',(#11803),#11807);+#11803 = LINE('',#11804,#11805);+#11804 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#11805 = VECTOR('',#11806,1.);+#11806 = DIRECTION('',(1.,-2.399596746007E-32));+#11807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11808 = ORIENTED_EDGE('',*,*,#11809,.F.);+#11809 = EDGE_CURVE('',#11810,#11787,#11812,.T.);+#11810 = VERTEX_POINT('',#11811);+#11811 = CARTESIAN_POINT('',(1.66,-3.99529407561,0.105));+#11812 = SURFACE_CURVE('',#11813,(#11818,#11825),.PCURVE_S1.);+#11813 = CIRCLE('',#11814,4.2E-02);+#11814 = AXIS2_PLACEMENT_3D('',#11815,#11816,#11817);+#11815 = CARTESIAN_POINT('',(1.66,-3.99529407561,0.147));+#11816 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#11817 = DIRECTION('',(0.,0.,1.));+#11818 = PCURVE('',#11252,#11819);+#11819 = DEFINITIONAL_REPRESENTATION('',(#11820),#11824);+#11820 = CIRCLE('',#11821,4.2E-02);+#11821 = AXIS2_PLACEMENT_2D('',#11822,#11823);+#11822 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#11823 = DIRECTION('',(1.,0.));+#11824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11825 = PCURVE('',#11444,#11826);+#11826 = DEFINITIONAL_REPRESENTATION('',(#11827),#11831);+#11827 = LINE('',#11828,#11829);+#11828 = CARTESIAN_POINT('',(0.,-9.E-02));+#11829 = VECTOR('',#11830,1.);+#11830 = DIRECTION('',(1.,0.));+#11831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11832 = ORIENTED_EDGE('',*,*,#11833,.T.);+#11833 = EDGE_CURVE('',#11810,#11834,#11836,.T.);+#11834 = VERTEX_POINT('',#11835);+#11835 = CARTESIAN_POINT('',(1.66,-4.43,0.105));+#11836 = SURFACE_CURVE('',#11837,(#11841,#11848),.PCURVE_S1.);+#11837 = LINE('',#11838,#11839);+#11838 = CARTESIAN_POINT('',(1.66,-3.938375,0.105));+#11839 = VECTOR('',#11840,1.);+#11840 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11841 = PCURVE('',#11252,#11842);+#11842 = DEFINITIONAL_REPRESENTATION('',(#11843),#11847);+#11843 = LINE('',#11844,#11845);+#11844 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#11845 = VECTOR('',#11846,1.);+#11846 = DIRECTION('',(0.,1.));+#11847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11848 = PCURVE('',#11472,#11849);+#11849 = DEFINITIONAL_REPRESENTATION('',(#11850),#11854);+#11850 = LINE('',#11851,#11852);+#11851 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#11852 = VECTOR('',#11853,1.);+#11853 = DIRECTION('',(1.,0.));+#11854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11855 = ORIENTED_EDGE('',*,*,#11856,.T.);+#11856 = EDGE_CURVE('',#11834,#11857,#11859,.T.);+#11857 = VERTEX_POINT('',#11858);+#11858 = CARTESIAN_POINT('',(1.66,-4.43,0.));+#11859 = SURFACE_CURVE('',#11860,(#11864,#11871),.PCURVE_S1.);+#11860 = LINE('',#11861,#11862);+#11861 = CARTESIAN_POINT('',(1.66,-4.43,-8.142959240193E-02));+#11862 = VECTOR('',#11863,1.);+#11863 = DIRECTION('',(0.,0.,-1.));+#11864 = PCURVE('',#11252,#11865);+#11865 = DEFINITIONAL_REPRESENTATION('',(#11866),#11870);+#11866 = LINE('',#11867,#11868);+#11867 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#11868 = VECTOR('',#11869,1.);+#11869 = DIRECTION('',(-1.,0.));+#11870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11871 = PCURVE('',#11500,#11872);+#11872 = DEFINITIONAL_REPRESENTATION('',(#11873),#11877);+#11873 = LINE('',#11874,#11875);+#11874 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#11875 = VECTOR('',#11876,1.);+#11876 = DIRECTION('',(-1.,-0.));+#11877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11878 = ORIENTED_EDGE('',*,*,#11879,.F.);+#11879 = EDGE_CURVE('',#11880,#11857,#11882,.T.);+#11880 = VERTEX_POINT('',#11881);+#11881 = CARTESIAN_POINT('',(1.66,-3.99529407561,0.));+#11882 = SURFACE_CURVE('',#11883,(#11887,#11894),.PCURVE_S1.);+#11883 = LINE('',#11884,#11885);+#11884 = CARTESIAN_POINT('',(1.66,-3.938375,0.));+#11885 = VECTOR('',#11886,1.);+#11886 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11887 = PCURVE('',#11252,#11888);+#11888 = DEFINITIONAL_REPRESENTATION('',(#11889),#11893);+#11889 = LINE('',#11890,#11891);+#11890 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#11891 = VECTOR('',#11892,1.);+#11892 = DIRECTION('',(0.,1.));+#11893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11894 = PCURVE('',#11528,#11895);+#11895 = DEFINITIONAL_REPRESENTATION('',(#11896),#11900);+#11896 = LINE('',#11897,#11898);+#11897 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#11898 = VECTOR('',#11899,1.);+#11899 = DIRECTION('',(1.,0.));+#11900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11901 = ORIENTED_EDGE('',*,*,#11902,.T.);+#11902 = EDGE_CURVE('',#11880,#11903,#11905,.T.);+#11903 = VERTEX_POINT('',#11904);+#11904 = CARTESIAN_POINT('',(1.66,-3.865353350249,7.826567165848E-02));+#11905 = SURFACE_CURVE('',#11906,(#11911,#11918),.PCURVE_S1.);+#11906 = CIRCLE('',#11907,0.147);+#11907 = AXIS2_PLACEMENT_3D('',#11908,#11909,#11910);+#11908 = CARTESIAN_POINT('',(1.66,-3.99529407561,0.147));+#11909 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#11910 = DIRECTION('',(0.,0.,1.));+#11911 = PCURVE('',#11252,#11912);+#11912 = DEFINITIONAL_REPRESENTATION('',(#11913),#11917);+#11913 = CIRCLE('',#11914,0.147);+#11914 = AXIS2_PLACEMENT_2D('',#11915,#11916);+#11915 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#11916 = DIRECTION('',(1.,0.));+#11917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11918 = PCURVE('',#11557,#11919);+#11919 = DEFINITIONAL_REPRESENTATION('',(#11920),#11924);+#11920 = LINE('',#11921,#11922);+#11921 = CARTESIAN_POINT('',(0.,-9.E-02));+#11922 = VECTOR('',#11923,1.);+#11923 = DIRECTION('',(1.,0.));+#11924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11925 = ORIENTED_EDGE('',*,*,#11926,.F.);+#11926 = EDGE_CURVE('',#11927,#11903,#11929,.T.);+#11927 = VERTEX_POINT('',#11928);+#11928 = CARTESIAN_POINT('',(1.66,-3.560206845921,0.655138379526));+#11929 = SURFACE_CURVE('',#11930,(#11934,#11941),.PCURVE_S1.);+#11930 = LINE('',#11931,#11932);+#11931 = CARTESIAN_POINT('',(1.66,-3.533592598085,0.705452025592));+#11932 = VECTOR('',#11933,1.);+#11933 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#11934 = PCURVE('',#11252,#11935);+#11935 = DEFINITIONAL_REPRESENTATION('',(#11936),#11940);+#11936 = LINE('',#11937,#11938);+#11937 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#11938 = VECTOR('',#11939,1.);+#11939 = DIRECTION('',(-0.883950512662,0.467580464908));+#11940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11941 = PCURVE('',#11585,#11942);+#11942 = DEFINITIONAL_REPRESENTATION('',(#11943),#11947);+#11943 = LINE('',#11944,#11945);+#11944 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#11945 = VECTOR('',#11946,1.);+#11946 = DIRECTION('',(1.,-2.399596746007E-32));+#11947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11948 = ORIENTED_EDGE('',*,*,#11949,.F.);+#11949 = EDGE_CURVE('',#11950,#11927,#11952,.T.);+#11950 = VERTEX_POINT('',#11951);+#11951 = CARTESIAN_POINT('',(1.66,-3.52308092439,0.6775));+#11952 = SURFACE_CURVE('',#11953,(#11958,#11965),.PCURVE_S1.);+#11953 = CIRCLE('',#11954,4.2E-02);+#11954 = AXIS2_PLACEMENT_3D('',#11955,#11956,#11957);+#11955 = CARTESIAN_POINT('',(1.66,-3.52308092439,0.6355));+#11956 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#11957 = DIRECTION('',(0.,0.,1.));+#11958 = PCURVE('',#11252,#11959);+#11959 = DEFINITIONAL_REPRESENTATION('',(#11960),#11964);+#11960 = CIRCLE('',#11961,4.2E-02);+#11961 = AXIS2_PLACEMENT_2D('',#11962,#11963);+#11962 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#11963 = DIRECTION('',(1.,0.));+#11964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11965 = PCURVE('',#11614,#11966);+#11966 = DEFINITIONAL_REPRESENTATION('',(#11967),#11971);+#11967 = LINE('',#11968,#11969);+#11968 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#11969 = VECTOR('',#11970,1.);+#11970 = DIRECTION('',(1.,0.));+#11971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11972 = ORIENTED_EDGE('',*,*,#11973,.F.);+#11973 = EDGE_CURVE('',#11974,#11950,#11976,.T.);+#11974 = VERTEX_POINT('',#11975);+#11975 = CARTESIAN_POINT('',(1.66,-3.25,0.6775));+#11976 = SURFACE_CURVE('',#11977,(#11981,#11988),.PCURVE_S1.);+#11977 = LINE('',#11978,#11979);+#11978 = CARTESIAN_POINT('',(1.66,-3.25,0.6775));+#11979 = VECTOR('',#11980,1.);+#11980 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#11981 = PCURVE('',#11252,#11982);+#11982 = DEFINITIONAL_REPRESENTATION('',(#11983),#11987);+#11983 = LINE('',#11984,#11985);+#11984 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#11985 = VECTOR('',#11986,1.);+#11986 = DIRECTION('',(0.,1.));+#11987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11988 = PCURVE('',#11642,#11989);+#11989 = DEFINITIONAL_REPRESENTATION('',(#11990),#11994);+#11990 = LINE('',#11991,#11992);+#11991 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#11992 = VECTOR('',#11993,1.);+#11993 = DIRECTION('',(1.,0.));+#11994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11995 = ORIENTED_EDGE('',*,*,#11996,.F.);+#11996 = EDGE_CURVE('',#11713,#11974,#11997,.T.);+#11997 = SURFACE_CURVE('',#11998,(#12003,#12014),.PCURVE_S1.);+#11998 = CIRCLE('',#11999,5.25E-02);+#11999 = AXIS2_PLACEMENT_3D('',#12000,#12001,#12002);+#12000 = CARTESIAN_POINT('',(1.66,-3.25,0.73));+#12001 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12002 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12003 = PCURVE('',#11252,#12004);+#12004 = DEFINITIONAL_REPRESENTATION('',(#12005),#12013);+#12005 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12006,#12007,#12008,#12009+ ,#12010,#12011,#12012),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12006 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#12007 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#12008 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#12009 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#12010 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#12011 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#12012 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#12013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12014 = PCURVE('',#11675,#12015);+#12015 = DEFINITIONAL_REPRESENTATION('',(#12016),#12020);+#12016 = LINE('',#12017,#12018);+#12017 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#12018 = VECTOR('',#12019,1.);+#12019 = DIRECTION('',(-1.,0.));+#12020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12021 = ORIENTED_EDGE('',*,*,#11712,.F.);+#12022 = ADVANCED_FACE('',(#12023),#11337,.T.);+#12023 = FACE_BOUND('',#12024,.T.);+#12024 = EDGE_LOOP('',(#12025,#12026,#12027,#12048));+#12025 = ORIENTED_EDGE('',*,*,#11321,.F.);+#12026 = ORIENTED_EDGE('',*,*,#11762,.T.);+#12027 = ORIENTED_EDGE('',*,*,#12028,.T.);+#12028 = EDGE_CURVE('',#11763,#11376,#12029,.T.);+#12029 = SURFACE_CURVE('',#12030,(#12034,#12041),.PCURVE_S1.);+#12030 = LINE('',#12031,#12032);+#12031 = CARTESIAN_POINT('',(1.66,-3.653021649751,0.704234328342));+#12032 = VECTOR('',#12033,1.);+#12033 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12034 = PCURVE('',#11337,#12035);+#12035 = DEFINITIONAL_REPRESENTATION('',(#12036),#12040);+#12036 = LINE('',#12037,#12038);+#12037 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#12038 = VECTOR('',#12039,1.);+#12039 = DIRECTION('',(-0.,1.));+#12040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12041 = PCURVE('',#11415,#12042);+#12042 = DEFINITIONAL_REPRESENTATION('',(#12043),#12047);+#12043 = LINE('',#12044,#12045);+#12044 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#12045 = VECTOR('',#12046,1.);+#12046 = DIRECTION('',(4.767113258106E-29,1.));+#12047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12048 = ORIENTED_EDGE('',*,*,#11375,.F.);+#12049 = ADVANCED_FACE('',(#12050),#11675,.T.);+#12050 = FACE_BOUND('',#12051,.T.);+#12051 = EDGE_LOOP('',(#12052,#12053,#12074,#12075));+#12052 = ORIENTED_EDGE('',*,*,#11654,.T.);+#12053 = ORIENTED_EDGE('',*,*,#12054,.T.);+#12054 = EDGE_CURVE('',#11627,#11974,#12055,.T.);+#12055 = SURFACE_CURVE('',#12056,(#12060,#12067),.PCURVE_S1.);+#12056 = LINE('',#12057,#12058);+#12057 = CARTESIAN_POINT('',(1.84,-3.25,0.6775));+#12058 = VECTOR('',#12059,1.);+#12059 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12060 = PCURVE('',#11675,#12061);+#12061 = DEFINITIONAL_REPRESENTATION('',(#12062),#12066);+#12062 = LINE('',#12063,#12064);+#12063 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#12064 = VECTOR('',#12065,1.);+#12065 = DIRECTION('',(-0.,-1.));+#12066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12067 = PCURVE('',#11642,#12068);+#12068 = DEFINITIONAL_REPRESENTATION('',(#12069),#12073);+#12069 = LINE('',#12070,#12071);+#12070 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#12071 = VECTOR('',#12072,1.);+#12072 = DIRECTION('',(0.,-1.));+#12073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12074 = ORIENTED_EDGE('',*,*,#11996,.F.);+#12075 = ORIENTED_EDGE('',*,*,#11735,.T.);+#12076 = ADVANCED_FACE('',(#12077),#11642,.F.);+#12077 = FACE_BOUND('',#12078,.F.);+#12078 = EDGE_LOOP('',(#12079,#12080,#12101,#12102));+#12079 = ORIENTED_EDGE('',*,*,#11973,.T.);+#12080 = ORIENTED_EDGE('',*,*,#12081,.F.);+#12081 = EDGE_CURVE('',#11598,#11950,#12082,.T.);+#12082 = SURFACE_CURVE('',#12083,(#12087,#12094),.PCURVE_S1.);+#12083 = LINE('',#12084,#12085);+#12084 = CARTESIAN_POINT('',(1.84,-3.52308092439,0.6775));+#12085 = VECTOR('',#12086,1.);+#12086 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12087 = PCURVE('',#11642,#12088);+#12088 = DEFINITIONAL_REPRESENTATION('',(#12089),#12093);+#12089 = LINE('',#12090,#12091);+#12090 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#12091 = VECTOR('',#12092,1.);+#12092 = DIRECTION('',(0.,-1.));+#12093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12094 = PCURVE('',#11614,#12095);+#12095 = DEFINITIONAL_REPRESENTATION('',(#12096),#12100);+#12096 = LINE('',#12097,#12098);+#12097 = CARTESIAN_POINT('',(0.,9.E-02));+#12098 = VECTOR('',#12099,1.);+#12099 = DIRECTION('',(0.,-1.));+#12100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12101 = ORIENTED_EDGE('',*,*,#11626,.F.);+#12102 = ORIENTED_EDGE('',*,*,#12054,.T.);+#12103 = ADVANCED_FACE('',(#12104),#11614,.F.);+#12104 = FACE_BOUND('',#12105,.F.);+#12105 = EDGE_LOOP('',(#12106,#12107,#12128,#12129));+#12106 = ORIENTED_EDGE('',*,*,#11949,.T.);+#12107 = ORIENTED_EDGE('',*,*,#12108,.F.);+#12108 = EDGE_CURVE('',#11570,#11927,#12109,.T.);+#12109 = SURFACE_CURVE('',#12110,(#12114,#12121),.PCURVE_S1.);+#12110 = LINE('',#12111,#12112);+#12111 = CARTESIAN_POINT('',(1.84,-3.560206845921,0.655138379526));+#12112 = VECTOR('',#12113,1.);+#12113 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12114 = PCURVE('',#11614,#12115);+#12115 = DEFINITIONAL_REPRESENTATION('',(#12116),#12120);+#12116 = LINE('',#12117,#12118);+#12117 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#12118 = VECTOR('',#12119,1.);+#12119 = DIRECTION('',(0.,-1.));+#12120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12121 = PCURVE('',#11585,#12122);+#12122 = DEFINITIONAL_REPRESENTATION('',(#12123),#12127);+#12123 = LINE('',#12124,#12125);+#12124 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#12125 = VECTOR('',#12126,1.);+#12126 = DIRECTION('',(-4.767113258106E-29,-1.));+#12127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12128 = ORIENTED_EDGE('',*,*,#11597,.F.);+#12129 = ORIENTED_EDGE('',*,*,#12081,.T.);+#12130 = ADVANCED_FACE('',(#12131),#11585,.F.);+#12131 = FACE_BOUND('',#12132,.F.);+#12132 = EDGE_LOOP('',(#12133,#12134,#12155,#12156));+#12133 = ORIENTED_EDGE('',*,*,#11926,.T.);+#12134 = ORIENTED_EDGE('',*,*,#12135,.F.);+#12135 = EDGE_CURVE('',#11541,#11903,#12136,.T.);+#12136 = SURFACE_CURVE('',#12137,(#12141,#12148),.PCURVE_S1.);+#12137 = LINE('',#12138,#12139);+#12138 = CARTESIAN_POINT('',(1.84,-3.865353350249,7.826567165848E-02));+#12139 = VECTOR('',#12140,1.);+#12140 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12141 = PCURVE('',#11585,#12142);+#12142 = DEFINITIONAL_REPRESENTATION('',(#12143),#12147);+#12143 = LINE('',#12144,#12145);+#12144 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#12145 = VECTOR('',#12146,1.);+#12146 = DIRECTION('',(-4.767113258106E-29,-1.));+#12147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12148 = PCURVE('',#11557,#12149);+#12149 = DEFINITIONAL_REPRESENTATION('',(#12150),#12154);+#12150 = LINE('',#12151,#12152);+#12151 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#12152 = VECTOR('',#12153,1.);+#12153 = DIRECTION('',(0.,-1.));+#12154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12155 = ORIENTED_EDGE('',*,*,#11569,.F.);+#12156 = ORIENTED_EDGE('',*,*,#12108,.T.);+#12157 = ADVANCED_FACE('',(#12158),#11557,.T.);+#12158 = FACE_BOUND('',#12159,.T.);+#12159 = EDGE_LOOP('',(#12160,#12161,#12162,#12163));+#12160 = ORIENTED_EDGE('',*,*,#11902,.T.);+#12161 = ORIENTED_EDGE('',*,*,#12135,.F.);+#12162 = ORIENTED_EDGE('',*,*,#11540,.F.);+#12163 = ORIENTED_EDGE('',*,*,#12164,.T.);+#12164 = EDGE_CURVE('',#11513,#11880,#12165,.T.);+#12165 = SURFACE_CURVE('',#12166,(#12170,#12177),.PCURVE_S1.);+#12166 = LINE('',#12167,#12168);+#12167 = CARTESIAN_POINT('',(1.84,-3.99529407561,0.));+#12168 = VECTOR('',#12169,1.);+#12169 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12170 = PCURVE('',#11557,#12171);+#12171 = DEFINITIONAL_REPRESENTATION('',(#12172),#12176);+#12172 = LINE('',#12173,#12174);+#12173 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#12174 = VECTOR('',#12175,1.);+#12175 = DIRECTION('',(0.,-1.));+#12176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12177 = PCURVE('',#11528,#12178);+#12178 = DEFINITIONAL_REPRESENTATION('',(#12179),#12183);+#12179 = LINE('',#12180,#12181);+#12180 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#12181 = VECTOR('',#12182,1.);+#12182 = DIRECTION('',(0.,-1.));+#12183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12184 = ADVANCED_FACE('',(#12185),#11528,.F.);+#12185 = FACE_BOUND('',#12186,.F.);+#12186 = EDGE_LOOP('',(#12187,#12188,#12189,#12210));+#12187 = ORIENTED_EDGE('',*,*,#12164,.T.);+#12188 = ORIENTED_EDGE('',*,*,#11879,.T.);+#12189 = ORIENTED_EDGE('',*,*,#12190,.T.);+#12190 = EDGE_CURVE('',#11857,#11485,#12191,.T.);+#12191 = SURFACE_CURVE('',#12192,(#12196,#12203),.PCURVE_S1.);+#12192 = LINE('',#12193,#12194);+#12193 = CARTESIAN_POINT('',(1.455,-4.43,0.));+#12194 = VECTOR('',#12195,1.);+#12195 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12196 = PCURVE('',#11528,#12197);+#12197 = DEFINITIONAL_REPRESENTATION('',(#12198),#12202);+#12198 = LINE('',#12199,#12200);+#12199 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#12200 = VECTOR('',#12201,1.);+#12201 = DIRECTION('',(0.,1.));+#12202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12203 = PCURVE('',#11500,#12204);+#12204 = DEFINITIONAL_REPRESENTATION('',(#12205),#12209);+#12205 = LINE('',#12206,#12207);+#12206 = CARTESIAN_POINT('',(0.5,-0.295));+#12207 = VECTOR('',#12208,1.);+#12208 = DIRECTION('',(0.,-1.));+#12209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12210 = ORIENTED_EDGE('',*,*,#11512,.F.);+#12211 = ADVANCED_FACE('',(#12212),#11500,.T.);+#12212 = FACE_BOUND('',#12213,.T.);+#12213 = EDGE_LOOP('',(#12214,#12215,#12236,#12237));+#12214 = ORIENTED_EDGE('',*,*,#11484,.F.);+#12215 = ORIENTED_EDGE('',*,*,#12216,.F.);+#12216 = EDGE_CURVE('',#11834,#11457,#12217,.T.);+#12217 = SURFACE_CURVE('',#12218,(#12222,#12229),.PCURVE_S1.);+#12218 = LINE('',#12219,#12220);+#12219 = CARTESIAN_POINT('',(1.455,-4.43,0.105));+#12220 = VECTOR('',#12221,1.);+#12221 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12222 = PCURVE('',#11500,#12223);+#12223 = DEFINITIONAL_REPRESENTATION('',(#12224),#12228);+#12224 = LINE('',#12225,#12226);+#12225 = CARTESIAN_POINT('',(0.605,-0.295));+#12226 = VECTOR('',#12227,1.);+#12227 = DIRECTION('',(0.,-1.));+#12228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12229 = PCURVE('',#11472,#12230);+#12230 = DEFINITIONAL_REPRESENTATION('',(#12231),#12235);+#12231 = LINE('',#12232,#12233);+#12232 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#12233 = VECTOR('',#12234,1.);+#12234 = DIRECTION('',(0.,1.));+#12235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12236 = ORIENTED_EDGE('',*,*,#11856,.T.);+#12237 = ORIENTED_EDGE('',*,*,#12190,.T.);+#12238 = ADVANCED_FACE('',(#12239),#11472,.T.);+#12239 = FACE_BOUND('',#12240,.T.);+#12240 = EDGE_LOOP('',(#12241,#12262,#12263,#12264));+#12241 = ORIENTED_EDGE('',*,*,#12242,.T.);+#12242 = EDGE_CURVE('',#11428,#11810,#12243,.T.);+#12243 = SURFACE_CURVE('',#12244,(#12248,#12255),.PCURVE_S1.);+#12244 = LINE('',#12245,#12246);+#12245 = CARTESIAN_POINT('',(1.84,-3.99529407561,0.105));+#12246 = VECTOR('',#12247,1.);+#12247 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12248 = PCURVE('',#11472,#12249);+#12249 = DEFINITIONAL_REPRESENTATION('',(#12250),#12254);+#12250 = LINE('',#12251,#12252);+#12251 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#12252 = VECTOR('',#12253,1.);+#12253 = DIRECTION('',(0.,-1.));+#12254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12255 = PCURVE('',#11444,#12256);+#12256 = DEFINITIONAL_REPRESENTATION('',(#12257),#12261);+#12257 = LINE('',#12258,#12259);+#12258 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#12259 = VECTOR('',#12260,1.);+#12260 = DIRECTION('',(0.,-1.));+#12261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12262 = ORIENTED_EDGE('',*,*,#11833,.T.);+#12263 = ORIENTED_EDGE('',*,*,#12216,.T.);+#12264 = ORIENTED_EDGE('',*,*,#11456,.F.);+#12265 = ADVANCED_FACE('',(#12266),#11444,.F.);+#12266 = FACE_BOUND('',#12267,.F.);+#12267 = EDGE_LOOP('',(#12268,#12269,#12290,#12291));+#12268 = ORIENTED_EDGE('',*,*,#11809,.T.);+#12269 = ORIENTED_EDGE('',*,*,#12270,.F.);+#12270 = EDGE_CURVE('',#11400,#11787,#12271,.T.);+#12271 = SURFACE_CURVE('',#12272,(#12276,#12283),.PCURVE_S1.);+#12272 = LINE('',#12273,#12274);+#12273 = CARTESIAN_POINT('',(1.84,-3.958168154079,0.127361620474));+#12274 = VECTOR('',#12275,1.);+#12275 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12276 = PCURVE('',#11444,#12277);+#12277 = DEFINITIONAL_REPRESENTATION('',(#12278),#12282);+#12278 = LINE('',#12279,#12280);+#12279 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#12280 = VECTOR('',#12281,1.);+#12281 = DIRECTION('',(0.,-1.));+#12282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12283 = PCURVE('',#11415,#12284);+#12284 = DEFINITIONAL_REPRESENTATION('',(#12285),#12289);+#12285 = LINE('',#12286,#12287);+#12286 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#12287 = VECTOR('',#12288,1.);+#12288 = DIRECTION('',(-4.767113258106E-29,-1.));+#12289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12290 = ORIENTED_EDGE('',*,*,#11427,.F.);+#12291 = ORIENTED_EDGE('',*,*,#12242,.T.);+#12292 = ADVANCED_FACE('',(#12293),#11415,.T.);+#12293 = FACE_BOUND('',#12294,.T.);+#12294 = EDGE_LOOP('',(#12295,#12296,#12297,#12298));+#12295 = ORIENTED_EDGE('',*,*,#12028,.F.);+#12296 = ORIENTED_EDGE('',*,*,#11786,.T.);+#12297 = ORIENTED_EDGE('',*,*,#12270,.F.);+#12298 = ORIENTED_EDGE('',*,*,#11399,.F.);+#12299 = MANIFOLD_SOLID_BREP('',#12300);+#12300 = CLOSED_SHELL('',(#12301,#12431,#12507,#12845,#12894,#13160,+ #13187,#13214,#13241,#13268,#13295,#13322,#13349,#13376,#13403,+ #13430));+#12301 = ADVANCED_FACE('',(#12302),#12317,.T.);+#12302 = FACE_BOUND('',#12303,.T.);+#12303 = EDGE_LOOP('',(#12304,#12344,#12372,#12405));+#12304 = ORIENTED_EDGE('',*,*,#12305,.T.);+#12305 = EDGE_CURVE('',#12306,#12308,#12310,.T.);+#12306 = VERTEX_POINT('',#12307);+#12307 = CARTESIAN_POINT('',(2.34,-3.25,0.7825));+#12308 = VERTEX_POINT('',#12309);+#12309 = CARTESIAN_POINT('',(2.34,-3.2,0.746007810594));+#12310 = SURFACE_CURVE('',#12311,(#12316,#12328),.PCURVE_S1.);+#12311 = CIRCLE('',#12312,5.25E-02);+#12312 = AXIS2_PLACEMENT_3D('',#12313,#12314,#12315);+#12313 = CARTESIAN_POINT('',(2.34,-3.25,0.73));+#12314 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12315 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12316 = PCURVE('',#12317,#12322);+#12317 = CYLINDRICAL_SURFACE('',#12318,5.25E-02);+#12318 = AXIS2_PLACEMENT_3D('',#12319,#12320,#12321);+#12319 = CARTESIAN_POINT('',(2.25,-3.25,0.73));+#12320 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12321 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12322 = DEFINITIONAL_REPRESENTATION('',(#12323),#12327);+#12323 = LINE('',#12324,#12325);+#12324 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#12325 = VECTOR('',#12326,1.);+#12326 = DIRECTION('',(-1.,-0.));+#12327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12328 = PCURVE('',#12329,#12334);+#12329 = PLANE('',#12330);+#12330 = AXIS2_PLACEMENT_3D('',#12331,#12332,#12333);+#12331 = CARTESIAN_POINT('',(2.34,-3.861815252728,0.337140815196));+#12332 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12333 = DIRECTION('',(0.,0.,1.));+#12334 = DEFINITIONAL_REPRESENTATION('',(#12335),#12343);+#12335 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12336,#12337,#12338,#12339+ ,#12340,#12341,#12342),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12336 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#12337 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#12338 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#12339 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#12340 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#12341 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#12342 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#12343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12344 = ORIENTED_EDGE('',*,*,#12345,.F.);+#12345 = EDGE_CURVE('',#12346,#12308,#12348,.T.);+#12346 = VERTEX_POINT('',#12347);+#12347 = CARTESIAN_POINT('',(2.16,-3.2,0.746007810594));+#12348 = SURFACE_CURVE('',#12349,(#12353,#12360),.PCURVE_S1.);+#12349 = LINE('',#12350,#12351);+#12350 = CARTESIAN_POINT('',(2.25,-3.2,0.746007810594));+#12351 = VECTOR('',#12352,1.);+#12352 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12353 = PCURVE('',#12317,#12354);+#12354 = DEFINITIONAL_REPRESENTATION('',(#12355),#12359);+#12355 = LINE('',#12356,#12357);+#12356 = CARTESIAN_POINT('',(3.451437293332,0.));+#12357 = VECTOR('',#12358,1.);+#12358 = DIRECTION('',(-0.,1.));+#12359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12360 = PCURVE('',#12361,#12366);+#12361 = PLANE('',#12362);+#12362 = AXIS2_PLACEMENT_3D('',#12363,#12364,#12365);+#12363 = CARTESIAN_POINT('',(1.66,-3.2,-0.5));+#12364 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12365 = DIRECTION('',(0.,0.,1.));+#12366 = DEFINITIONAL_REPRESENTATION('',(#12367),#12371);+#12367 = LINE('',#12368,#12369);+#12368 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#12369 = VECTOR('',#12370,1.);+#12370 = DIRECTION('',(0.,-1.));+#12371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12372 = ORIENTED_EDGE('',*,*,#12373,.F.);+#12373 = EDGE_CURVE('',#12374,#12346,#12376,.T.);+#12374 = VERTEX_POINT('',#12375);+#12375 = CARTESIAN_POINT('',(2.16,-3.25,0.7825));+#12376 = SURFACE_CURVE('',#12377,(#12382,#12389),.PCURVE_S1.);+#12377 = CIRCLE('',#12378,5.25E-02);+#12378 = AXIS2_PLACEMENT_3D('',#12379,#12380,#12381);+#12379 = CARTESIAN_POINT('',(2.16,-3.25,0.73));+#12380 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12381 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12382 = PCURVE('',#12317,#12383);+#12383 = DEFINITIONAL_REPRESENTATION('',(#12384),#12388);+#12384 = LINE('',#12385,#12386);+#12385 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#12386 = VECTOR('',#12387,1.);+#12387 = DIRECTION('',(-1.,0.));+#12388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12389 = PCURVE('',#12390,#12395);+#12390 = PLANE('',#12391);+#12391 = AXIS2_PLACEMENT_3D('',#12392,#12393,#12394);+#12392 = CARTESIAN_POINT('',(2.16,-3.861815252728,0.337140815196));+#12393 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12394 = DIRECTION('',(0.,0.,1.));+#12395 = DEFINITIONAL_REPRESENTATION('',(#12396),#12404);+#12396 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12397,#12398,#12399,#12400+ ,#12401,#12402,#12403),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12397 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#12398 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#12399 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#12400 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#12401 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#12402 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#12403 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#12404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12405 = ORIENTED_EDGE('',*,*,#12406,.T.);+#12406 = EDGE_CURVE('',#12374,#12306,#12407,.T.);+#12407 = SURFACE_CURVE('',#12408,(#12412,#12419),.PCURVE_S1.);+#12408 = LINE('',#12409,#12410);+#12409 = CARTESIAN_POINT('',(2.16,-3.25,0.7825));+#12410 = VECTOR('',#12411,1.);+#12411 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12412 = PCURVE('',#12317,#12413);+#12413 = DEFINITIONAL_REPRESENTATION('',(#12414),#12418);+#12414 = LINE('',#12415,#12416);+#12415 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#12416 = VECTOR('',#12417,1.);+#12417 = DIRECTION('',(0.,1.));+#12418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12419 = PCURVE('',#12420,#12425);+#12420 = PLANE('',#12421);+#12421 = AXIS2_PLACEMENT_3D('',#12422,#12423,#12424);+#12422 = CARTESIAN_POINT('',(2.25,-3.25,0.7825));+#12423 = DIRECTION('',(0.,0.,1.));+#12424 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12425 = DEFINITIONAL_REPRESENTATION('',(#12426),#12430);+#12426 = LINE('',#12427,#12428);+#12427 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#12428 = VECTOR('',#12429,1.);+#12429 = DIRECTION('',(0.,1.));+#12430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12431 = ADVANCED_FACE('',(#12432),#12420,.T.);+#12432 = FACE_BOUND('',#12433,.T.);+#12433 = EDGE_LOOP('',(#12434,#12435,#12458,#12486));+#12434 = ORIENTED_EDGE('',*,*,#12406,.F.);+#12435 = ORIENTED_EDGE('',*,*,#12436,.T.);+#12436 = EDGE_CURVE('',#12374,#12437,#12439,.T.);+#12437 = VERTEX_POINT('',#12438);+#12438 = CARTESIAN_POINT('',(2.16,-3.52308092439,0.7825));+#12439 = SURFACE_CURVE('',#12440,(#12444,#12451),.PCURVE_S1.);+#12440 = LINE('',#12441,#12442);+#12441 = CARTESIAN_POINT('',(2.16,-3.25,0.7825));+#12442 = VECTOR('',#12443,1.);+#12443 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12444 = PCURVE('',#12420,#12445);+#12445 = DEFINITIONAL_REPRESENTATION('',(#12446),#12450);+#12446 = LINE('',#12447,#12448);+#12447 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#12448 = VECTOR('',#12449,1.);+#12449 = DIRECTION('',(1.,0.));+#12450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12451 = PCURVE('',#12390,#12452);+#12452 = DEFINITIONAL_REPRESENTATION('',(#12453),#12457);+#12453 = LINE('',#12454,#12455);+#12454 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#12455 = VECTOR('',#12456,1.);+#12456 = DIRECTION('',(0.,1.));+#12457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12458 = ORIENTED_EDGE('',*,*,#12459,.T.);+#12459 = EDGE_CURVE('',#12437,#12460,#12462,.T.);+#12460 = VERTEX_POINT('',#12461);+#12461 = CARTESIAN_POINT('',(2.34,-3.52308092439,0.7825));+#12462 = SURFACE_CURVE('',#12463,(#12467,#12474),.PCURVE_S1.);+#12463 = LINE('',#12464,#12465);+#12464 = CARTESIAN_POINT('',(2.16,-3.52308092439,0.7825));+#12465 = VECTOR('',#12466,1.);+#12466 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12467 = PCURVE('',#12420,#12468);+#12468 = DEFINITIONAL_REPRESENTATION('',(#12469),#12473);+#12469 = LINE('',#12470,#12471);+#12470 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#12471 = VECTOR('',#12472,1.);+#12472 = DIRECTION('',(0.,1.));+#12473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12474 = PCURVE('',#12475,#12480);+#12475 = CYLINDRICAL_SURFACE('',#12476,0.147);+#12476 = AXIS2_PLACEMENT_3D('',#12477,#12478,#12479);+#12477 = CARTESIAN_POINT('',(2.25,-3.52308092439,0.6355));+#12478 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12479 = DIRECTION('',(0.,0.,1.));+#12480 = DEFINITIONAL_REPRESENTATION('',(#12481),#12485);+#12481 = LINE('',#12482,#12483);+#12482 = CARTESIAN_POINT('',(0.,-9.E-02));+#12483 = VECTOR('',#12484,1.);+#12484 = DIRECTION('',(-0.,1.));+#12485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12486 = ORIENTED_EDGE('',*,*,#12487,.F.);+#12487 = EDGE_CURVE('',#12306,#12460,#12488,.T.);+#12488 = SURFACE_CURVE('',#12489,(#12493,#12500),.PCURVE_S1.);+#12489 = LINE('',#12490,#12491);+#12490 = CARTESIAN_POINT('',(2.34,-3.25,0.7825));+#12491 = VECTOR('',#12492,1.);+#12492 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12493 = PCURVE('',#12420,#12494);+#12494 = DEFINITIONAL_REPRESENTATION('',(#12495),#12499);+#12495 = LINE('',#12496,#12497);+#12496 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#12497 = VECTOR('',#12498,1.);+#12498 = DIRECTION('',(1.,0.));+#12499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12500 = PCURVE('',#12329,#12501);+#12501 = DEFINITIONAL_REPRESENTATION('',(#12502),#12506);+#12502 = LINE('',#12503,#12504);+#12503 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#12504 = VECTOR('',#12505,1.);+#12505 = DIRECTION('',(0.,1.));+#12506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12507 = ADVANCED_FACE('',(#12508),#12329,.T.);+#12508 = FACE_BOUND('',#12509,.T.);+#12509 = EDGE_LOOP('',(#12510,#12511,#12512,#12536,#12564,#12593,#12621,+ #12649,#12677,#12706,#12734,#12763,#12791,#12824));+#12510 = ORIENTED_EDGE('',*,*,#12305,.F.);+#12511 = ORIENTED_EDGE('',*,*,#12487,.T.);+#12512 = ORIENTED_EDGE('',*,*,#12513,.T.);+#12513 = EDGE_CURVE('',#12460,#12514,#12516,.T.);+#12514 = VERTEX_POINT('',#12515);+#12515 = CARTESIAN_POINT('',(2.34,-3.653021649751,0.704234328342));+#12516 = SURFACE_CURVE('',#12517,(#12522,#12529),.PCURVE_S1.);+#12517 = CIRCLE('',#12518,0.147);+#12518 = AXIS2_PLACEMENT_3D('',#12519,#12520,#12521);+#12519 = CARTESIAN_POINT('',(2.34,-3.52308092439,0.6355));+#12520 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#12521 = DIRECTION('',(0.,0.,1.));+#12522 = PCURVE('',#12329,#12523);+#12523 = DEFINITIONAL_REPRESENTATION('',(#12524),#12528);+#12524 = CIRCLE('',#12525,0.147);+#12525 = AXIS2_PLACEMENT_2D('',#12526,#12527);+#12526 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#12527 = DIRECTION('',(1.,0.));+#12528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12529 = PCURVE('',#12475,#12530);+#12530 = DEFINITIONAL_REPRESENTATION('',(#12531),#12535);+#12531 = LINE('',#12532,#12533);+#12532 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#12533 = VECTOR('',#12534,1.);+#12534 = DIRECTION('',(1.,-0.));+#12535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12536 = ORIENTED_EDGE('',*,*,#12537,.T.);+#12537 = EDGE_CURVE('',#12514,#12538,#12540,.T.);+#12538 = VERTEX_POINT('',#12539);+#12539 = CARTESIAN_POINT('',(2.34,-3.958168154079,0.127361620474));+#12540 = SURFACE_CURVE('',#12541,(#12545,#12552),.PCURVE_S1.);+#12541 = LINE('',#12542,#12543);+#12542 = CARTESIAN_POINT('',(2.34,-3.626407401915,0.754547974408));+#12543 = VECTOR('',#12544,1.);+#12544 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#12545 = PCURVE('',#12329,#12546);+#12546 = DEFINITIONAL_REPRESENTATION('',(#12547),#12551);+#12547 = LINE('',#12548,#12549);+#12548 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#12549 = VECTOR('',#12550,1.);+#12550 = DIRECTION('',(-0.883950512662,0.467580464908));+#12551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12552 = PCURVE('',#12553,#12558);+#12553 = PLANE('',#12554);+#12554 = AXIS2_PLACEMENT_3D('',#12555,#12556,#12557);+#12555 = CARTESIAN_POINT('',(2.25,-3.653021649751,0.704234328342));+#12556 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908+ ));+#12557 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#12558 = DEFINITIONAL_REPRESENTATION('',(#12559),#12563);+#12559 = LINE('',#12560,#12561);+#12560 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#12561 = VECTOR('',#12562,1.);+#12562 = DIRECTION('',(1.,-2.399596746007E-32));+#12563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12564 = ORIENTED_EDGE('',*,*,#12565,.F.);+#12565 = EDGE_CURVE('',#12566,#12538,#12568,.T.);+#12566 = VERTEX_POINT('',#12567);+#12567 = CARTESIAN_POINT('',(2.34,-3.99529407561,0.105));+#12568 = SURFACE_CURVE('',#12569,(#12574,#12581),.PCURVE_S1.);+#12569 = CIRCLE('',#12570,4.2E-02);+#12570 = AXIS2_PLACEMENT_3D('',#12571,#12572,#12573);+#12571 = CARTESIAN_POINT('',(2.34,-3.99529407561,0.147));+#12572 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#12573 = DIRECTION('',(0.,0.,1.));+#12574 = PCURVE('',#12329,#12575);+#12575 = DEFINITIONAL_REPRESENTATION('',(#12576),#12580);+#12576 = CIRCLE('',#12577,4.2E-02);+#12577 = AXIS2_PLACEMENT_2D('',#12578,#12579);+#12578 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#12579 = DIRECTION('',(1.,0.));+#12580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12581 = PCURVE('',#12582,#12587);+#12582 = CYLINDRICAL_SURFACE('',#12583,4.2E-02);+#12583 = AXIS2_PLACEMENT_3D('',#12584,#12585,#12586);+#12584 = CARTESIAN_POINT('',(2.25,-3.99529407561,0.147));+#12585 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12586 = DIRECTION('',(0.,0.,1.));+#12587 = DEFINITIONAL_REPRESENTATION('',(#12588),#12592);+#12588 = LINE('',#12589,#12590);+#12589 = CARTESIAN_POINT('',(-0.,9.E-02));+#12590 = VECTOR('',#12591,1.);+#12591 = DIRECTION('',(1.,-0.));+#12592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12593 = ORIENTED_EDGE('',*,*,#12594,.T.);+#12594 = EDGE_CURVE('',#12566,#12595,#12597,.T.);+#12595 = VERTEX_POINT('',#12596);+#12596 = CARTESIAN_POINT('',(2.34,-4.43,0.105));+#12597 = SURFACE_CURVE('',#12598,(#12602,#12609),.PCURVE_S1.);+#12598 = LINE('',#12599,#12600);+#12599 = CARTESIAN_POINT('',(2.34,-3.938375,0.105));+#12600 = VECTOR('',#12601,1.);+#12601 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12602 = PCURVE('',#12329,#12603);+#12603 = DEFINITIONAL_REPRESENTATION('',(#12604),#12608);+#12604 = LINE('',#12605,#12606);+#12605 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#12606 = VECTOR('',#12607,1.);+#12607 = DIRECTION('',(0.,1.));+#12608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12609 = PCURVE('',#12610,#12615);+#12610 = PLANE('',#12611);+#12611 = AXIS2_PLACEMENT_3D('',#12612,#12613,#12614);+#12612 = CARTESIAN_POINT('',(2.25,-3.99529407561,0.105));+#12613 = DIRECTION('',(0.,0.,1.));+#12614 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12615 = DEFINITIONAL_REPRESENTATION('',(#12616),#12620);+#12616 = LINE('',#12617,#12618);+#12617 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#12618 = VECTOR('',#12619,1.);+#12619 = DIRECTION('',(1.,0.));+#12620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12621 = ORIENTED_EDGE('',*,*,#12622,.T.);+#12622 = EDGE_CURVE('',#12595,#12623,#12625,.T.);+#12623 = VERTEX_POINT('',#12624);+#12624 = CARTESIAN_POINT('',(2.34,-4.43,0.));+#12625 = SURFACE_CURVE('',#12626,(#12630,#12637),.PCURVE_S1.);+#12626 = LINE('',#12627,#12628);+#12627 = CARTESIAN_POINT('',(2.34,-4.43,-8.142959240193E-02));+#12628 = VECTOR('',#12629,1.);+#12629 = DIRECTION('',(0.,0.,-1.));+#12630 = PCURVE('',#12329,#12631);+#12631 = DEFINITIONAL_REPRESENTATION('',(#12632),#12636);+#12632 = LINE('',#12633,#12634);+#12633 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#12634 = VECTOR('',#12635,1.);+#12635 = DIRECTION('',(-1.,0.));+#12636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12637 = PCURVE('',#12638,#12643);+#12638 = PLANE('',#12639);+#12639 = AXIS2_PLACEMENT_3D('',#12640,#12641,#12642);+#12640 = CARTESIAN_POINT('',(1.66,-4.43,-0.5));+#12641 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12642 = DIRECTION('',(0.,0.,1.));+#12643 = DEFINITIONAL_REPRESENTATION('',(#12644),#12648);+#12644 = LINE('',#12645,#12646);+#12645 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#12646 = VECTOR('',#12647,1.);+#12647 = DIRECTION('',(-1.,-0.));+#12648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12649 = ORIENTED_EDGE('',*,*,#12650,.F.);+#12650 = EDGE_CURVE('',#12651,#12623,#12653,.T.);+#12651 = VERTEX_POINT('',#12652);+#12652 = CARTESIAN_POINT('',(2.34,-3.99529407561,0.));+#12653 = SURFACE_CURVE('',#12654,(#12658,#12665),.PCURVE_S1.);+#12654 = LINE('',#12655,#12656);+#12655 = CARTESIAN_POINT('',(2.34,-3.938375,0.));+#12656 = VECTOR('',#12657,1.);+#12657 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12658 = PCURVE('',#12329,#12659);+#12659 = DEFINITIONAL_REPRESENTATION('',(#12660),#12664);+#12660 = LINE('',#12661,#12662);+#12661 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#12662 = VECTOR('',#12663,1.);+#12663 = DIRECTION('',(0.,1.));+#12664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12665 = PCURVE('',#12666,#12671);+#12666 = PLANE('',#12667);+#12667 = AXIS2_PLACEMENT_3D('',#12668,#12669,#12670);+#12668 = CARTESIAN_POINT('',(2.25,-3.99529407561,0.));+#12669 = DIRECTION('',(0.,0.,1.));+#12670 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12671 = DEFINITIONAL_REPRESENTATION('',(#12672),#12676);+#12672 = LINE('',#12673,#12674);+#12673 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#12674 = VECTOR('',#12675,1.);+#12675 = DIRECTION('',(1.,0.));+#12676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12677 = ORIENTED_EDGE('',*,*,#12678,.T.);+#12678 = EDGE_CURVE('',#12651,#12679,#12681,.T.);+#12679 = VERTEX_POINT('',#12680);+#12680 = CARTESIAN_POINT('',(2.34,-3.865353350249,7.826567165848E-02));+#12681 = SURFACE_CURVE('',#12682,(#12687,#12694),.PCURVE_S1.);+#12682 = CIRCLE('',#12683,0.147);+#12683 = AXIS2_PLACEMENT_3D('',#12684,#12685,#12686);+#12684 = CARTESIAN_POINT('',(2.34,-3.99529407561,0.147));+#12685 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#12686 = DIRECTION('',(0.,0.,1.));+#12687 = PCURVE('',#12329,#12688);+#12688 = DEFINITIONAL_REPRESENTATION('',(#12689),#12693);+#12689 = CIRCLE('',#12690,0.147);+#12690 = AXIS2_PLACEMENT_2D('',#12691,#12692);+#12691 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#12692 = DIRECTION('',(1.,0.));+#12693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12694 = PCURVE('',#12695,#12700);+#12695 = CYLINDRICAL_SURFACE('',#12696,0.147);+#12696 = AXIS2_PLACEMENT_3D('',#12697,#12698,#12699);+#12697 = CARTESIAN_POINT('',(2.25,-3.99529407561,0.147));+#12698 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12699 = DIRECTION('',(0.,0.,1.));+#12700 = DEFINITIONAL_REPRESENTATION('',(#12701),#12705);+#12701 = LINE('',#12702,#12703);+#12702 = CARTESIAN_POINT('',(-0.,9.E-02));+#12703 = VECTOR('',#12704,1.);+#12704 = DIRECTION('',(1.,-0.));+#12705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12706 = ORIENTED_EDGE('',*,*,#12707,.F.);+#12707 = EDGE_CURVE('',#12708,#12679,#12710,.T.);+#12708 = VERTEX_POINT('',#12709);+#12709 = CARTESIAN_POINT('',(2.34,-3.560206845921,0.655138379526));+#12710 = SURFACE_CURVE('',#12711,(#12715,#12722),.PCURVE_S1.);+#12711 = LINE('',#12712,#12713);+#12712 = CARTESIAN_POINT('',(2.34,-3.533592598085,0.705452025592));+#12713 = VECTOR('',#12714,1.);+#12714 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#12715 = PCURVE('',#12329,#12716);+#12716 = DEFINITIONAL_REPRESENTATION('',(#12717),#12721);+#12717 = LINE('',#12718,#12719);+#12718 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#12719 = VECTOR('',#12720,1.);+#12720 = DIRECTION('',(-0.883950512662,0.467580464908));+#12721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12722 = PCURVE('',#12723,#12728);+#12723 = PLANE('',#12724);+#12724 = AXIS2_PLACEMENT_3D('',#12725,#12726,#12727);+#12725 = CARTESIAN_POINT('',(2.25,-3.560206845921,0.655138379526));+#12726 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908+ ));+#12727 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#12728 = DEFINITIONAL_REPRESENTATION('',(#12729),#12733);+#12729 = LINE('',#12730,#12731);+#12730 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#12731 = VECTOR('',#12732,1.);+#12732 = DIRECTION('',(1.,-2.399596746007E-32));+#12733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12734 = ORIENTED_EDGE('',*,*,#12735,.F.);+#12735 = EDGE_CURVE('',#12736,#12708,#12738,.T.);+#12736 = VERTEX_POINT('',#12737);+#12737 = CARTESIAN_POINT('',(2.34,-3.52308092439,0.6775));+#12738 = SURFACE_CURVE('',#12739,(#12744,#12751),.PCURVE_S1.);+#12739 = CIRCLE('',#12740,4.2E-02);+#12740 = AXIS2_PLACEMENT_3D('',#12741,#12742,#12743);+#12741 = CARTESIAN_POINT('',(2.34,-3.52308092439,0.6355));+#12742 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#12743 = DIRECTION('',(0.,0.,1.));+#12744 = PCURVE('',#12329,#12745);+#12745 = DEFINITIONAL_REPRESENTATION('',(#12746),#12750);+#12746 = CIRCLE('',#12747,4.2E-02);+#12747 = AXIS2_PLACEMENT_2D('',#12748,#12749);+#12748 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#12749 = DIRECTION('',(1.,0.));+#12750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12751 = PCURVE('',#12752,#12757);+#12752 = CYLINDRICAL_SURFACE('',#12753,4.2E-02);+#12753 = AXIS2_PLACEMENT_3D('',#12754,#12755,#12756);+#12754 = CARTESIAN_POINT('',(2.25,-3.52308092439,0.6355));+#12755 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12756 = DIRECTION('',(0.,0.,1.));+#12757 = DEFINITIONAL_REPRESENTATION('',(#12758),#12762);+#12758 = LINE('',#12759,#12760);+#12759 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#12760 = VECTOR('',#12761,1.);+#12761 = DIRECTION('',(1.,-0.));+#12762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12763 = ORIENTED_EDGE('',*,*,#12764,.F.);+#12764 = EDGE_CURVE('',#12765,#12736,#12767,.T.);+#12765 = VERTEX_POINT('',#12766);+#12766 = CARTESIAN_POINT('',(2.34,-3.25,0.6775));+#12767 = SURFACE_CURVE('',#12768,(#12772,#12779),.PCURVE_S1.);+#12768 = LINE('',#12769,#12770);+#12769 = CARTESIAN_POINT('',(2.34,-3.25,0.6775));+#12770 = VECTOR('',#12771,1.);+#12771 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12772 = PCURVE('',#12329,#12773);+#12773 = DEFINITIONAL_REPRESENTATION('',(#12774),#12778);+#12774 = LINE('',#12775,#12776);+#12775 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#12776 = VECTOR('',#12777,1.);+#12777 = DIRECTION('',(0.,1.));+#12778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12779 = PCURVE('',#12780,#12785);+#12780 = PLANE('',#12781);+#12781 = AXIS2_PLACEMENT_3D('',#12782,#12783,#12784);+#12782 = CARTESIAN_POINT('',(2.25,-3.25,0.6775));+#12783 = DIRECTION('',(0.,0.,1.));+#12784 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12785 = DEFINITIONAL_REPRESENTATION('',(#12786),#12790);+#12786 = LINE('',#12787,#12788);+#12787 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#12788 = VECTOR('',#12789,1.);+#12789 = DIRECTION('',(1.,0.));+#12790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12791 = ORIENTED_EDGE('',*,*,#12792,.F.);+#12792 = EDGE_CURVE('',#12793,#12765,#12795,.T.);+#12793 = VERTEX_POINT('',#12794);+#12794 = CARTESIAN_POINT('',(2.34,-3.2,0.713992189406));+#12795 = SURFACE_CURVE('',#12796,(#12801,#12812),.PCURVE_S1.);+#12796 = CIRCLE('',#12797,5.25E-02);+#12797 = AXIS2_PLACEMENT_3D('',#12798,#12799,#12800);+#12798 = CARTESIAN_POINT('',(2.34,-3.25,0.73));+#12799 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#12800 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12801 = PCURVE('',#12329,#12802);+#12802 = DEFINITIONAL_REPRESENTATION('',(#12803),#12811);+#12803 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#12804,#12805,#12806,#12807+ ,#12808,#12809,#12810),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#12804 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#12805 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#12806 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#12807 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#12808 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#12809 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#12810 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#12811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12812 = PCURVE('',#12813,#12818);+#12813 = CYLINDRICAL_SURFACE('',#12814,5.25E-02);+#12814 = AXIS2_PLACEMENT_3D('',#12815,#12816,#12817);+#12815 = CARTESIAN_POINT('',(2.25,-3.25,0.73));+#12816 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12817 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12818 = DEFINITIONAL_REPRESENTATION('',(#12819),#12823);+#12819 = LINE('',#12820,#12821);+#12820 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#12821 = VECTOR('',#12822,1.);+#12822 = DIRECTION('',(-1.,-0.));+#12823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12824 = ORIENTED_EDGE('',*,*,#12825,.F.);+#12825 = EDGE_CURVE('',#12308,#12793,#12826,.T.);+#12826 = SURFACE_CURVE('',#12827,(#12831,#12838),.PCURVE_S1.);+#12827 = LINE('',#12828,#12829);+#12828 = CARTESIAN_POINT('',(2.34,-3.2,-8.142959240193E-02));+#12829 = VECTOR('',#12830,1.);+#12830 = DIRECTION('',(0.,0.,-1.));+#12831 = PCURVE('',#12329,#12832);+#12832 = DEFINITIONAL_REPRESENTATION('',(#12833),#12837);+#12833 = LINE('',#12834,#12835);+#12834 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#12835 = VECTOR('',#12836,1.);+#12836 = DIRECTION('',(-1.,0.));+#12837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12838 = PCURVE('',#12361,#12839);+#12839 = DEFINITIONAL_REPRESENTATION('',(#12840),#12844);+#12840 = LINE('',#12841,#12842);+#12841 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#12842 = VECTOR('',#12843,1.);+#12843 = DIRECTION('',(-1.,-0.));+#12844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12845 = ADVANCED_FACE('',(#12846),#12361,.F.);+#12846 = FACE_BOUND('',#12847,.F.);+#12847 = EDGE_LOOP('',(#12848,#12849,#12872,#12893));+#12848 = ORIENTED_EDGE('',*,*,#12345,.F.);+#12849 = ORIENTED_EDGE('',*,*,#12850,.T.);+#12850 = EDGE_CURVE('',#12346,#12851,#12853,.T.);+#12851 = VERTEX_POINT('',#12852);+#12852 = CARTESIAN_POINT('',(2.16,-3.2,0.713992189406));+#12853 = SURFACE_CURVE('',#12854,(#12858,#12865),.PCURVE_S1.);+#12854 = LINE('',#12855,#12856);+#12855 = CARTESIAN_POINT('',(2.16,-3.2,-8.142959240193E-02));+#12856 = VECTOR('',#12857,1.);+#12857 = DIRECTION('',(0.,0.,-1.));+#12858 = PCURVE('',#12361,#12859);+#12859 = DEFINITIONAL_REPRESENTATION('',(#12860),#12864);+#12860 = LINE('',#12861,#12862);+#12861 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#12862 = VECTOR('',#12863,1.);+#12863 = DIRECTION('',(-1.,-0.));+#12864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12865 = PCURVE('',#12390,#12866);+#12866 = DEFINITIONAL_REPRESENTATION('',(#12867),#12871);+#12867 = LINE('',#12868,#12869);+#12868 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#12869 = VECTOR('',#12870,1.);+#12870 = DIRECTION('',(-1.,0.));+#12871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12872 = ORIENTED_EDGE('',*,*,#12873,.T.);+#12873 = EDGE_CURVE('',#12851,#12793,#12874,.T.);+#12874 = SURFACE_CURVE('',#12875,(#12879,#12886),.PCURVE_S1.);+#12875 = LINE('',#12876,#12877);+#12876 = CARTESIAN_POINT('',(2.25,-3.2,0.713992189406));+#12877 = VECTOR('',#12878,1.);+#12878 = DIRECTION('',(1.,1.110223024625E-16,0.));+#12879 = PCURVE('',#12361,#12880);+#12880 = DEFINITIONAL_REPRESENTATION('',(#12881),#12885);+#12881 = LINE('',#12882,#12883);+#12882 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#12883 = VECTOR('',#12884,1.);+#12884 = DIRECTION('',(0.,-1.));+#12885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12886 = PCURVE('',#12813,#12887);+#12887 = DEFINITIONAL_REPRESENTATION('',(#12888),#12892);+#12888 = LINE('',#12889,#12890);+#12889 = CARTESIAN_POINT('',(2.831748013849,0.));+#12890 = VECTOR('',#12891,1.);+#12891 = DIRECTION('',(-0.,1.));+#12892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12893 = ORIENTED_EDGE('',*,*,#12825,.F.);+#12894 = ADVANCED_FACE('',(#12895),#12390,.F.);+#12895 = FACE_BOUND('',#12896,.F.);+#12896 = EDGE_LOOP('',(#12897,#12898,#12899,#12923,#12946,#12970,#12993,+ #13016,#13039,#13063,#13086,#13110,#13133,#13159));+#12897 = ORIENTED_EDGE('',*,*,#12373,.F.);+#12898 = ORIENTED_EDGE('',*,*,#12436,.T.);+#12899 = ORIENTED_EDGE('',*,*,#12900,.T.);+#12900 = EDGE_CURVE('',#12437,#12901,#12903,.T.);+#12901 = VERTEX_POINT('',#12902);+#12902 = CARTESIAN_POINT('',(2.16,-3.653021649751,0.704234328342));+#12903 = SURFACE_CURVE('',#12904,(#12909,#12916),.PCURVE_S1.);+#12904 = CIRCLE('',#12905,0.147);+#12905 = AXIS2_PLACEMENT_3D('',#12906,#12907,#12908);+#12906 = CARTESIAN_POINT('',(2.16,-3.52308092439,0.6355));+#12907 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#12908 = DIRECTION('',(0.,0.,1.));+#12909 = PCURVE('',#12390,#12910);+#12910 = DEFINITIONAL_REPRESENTATION('',(#12911),#12915);+#12911 = CIRCLE('',#12912,0.147);+#12912 = AXIS2_PLACEMENT_2D('',#12913,#12914);+#12913 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#12914 = DIRECTION('',(1.,0.));+#12915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12916 = PCURVE('',#12475,#12917);+#12917 = DEFINITIONAL_REPRESENTATION('',(#12918),#12922);+#12918 = LINE('',#12919,#12920);+#12919 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#12920 = VECTOR('',#12921,1.);+#12921 = DIRECTION('',(1.,0.));+#12922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12923 = ORIENTED_EDGE('',*,*,#12924,.T.);+#12924 = EDGE_CURVE('',#12901,#12925,#12927,.T.);+#12925 = VERTEX_POINT('',#12926);+#12926 = CARTESIAN_POINT('',(2.16,-3.958168154079,0.127361620474));+#12927 = SURFACE_CURVE('',#12928,(#12932,#12939),.PCURVE_S1.);+#12928 = LINE('',#12929,#12930);+#12929 = CARTESIAN_POINT('',(2.16,-3.626407401915,0.754547974408));+#12930 = VECTOR('',#12931,1.);+#12931 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#12932 = PCURVE('',#12390,#12933);+#12933 = DEFINITIONAL_REPRESENTATION('',(#12934),#12938);+#12934 = LINE('',#12935,#12936);+#12935 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#12936 = VECTOR('',#12937,1.);+#12937 = DIRECTION('',(-0.883950512662,0.467580464908));+#12938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12939 = PCURVE('',#12553,#12940);+#12940 = DEFINITIONAL_REPRESENTATION('',(#12941),#12945);+#12941 = LINE('',#12942,#12943);+#12942 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#12943 = VECTOR('',#12944,1.);+#12944 = DIRECTION('',(1.,-2.399596746007E-32));+#12945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12946 = ORIENTED_EDGE('',*,*,#12947,.F.);+#12947 = EDGE_CURVE('',#12948,#12925,#12950,.T.);+#12948 = VERTEX_POINT('',#12949);+#12949 = CARTESIAN_POINT('',(2.16,-3.99529407561,0.105));+#12950 = SURFACE_CURVE('',#12951,(#12956,#12963),.PCURVE_S1.);+#12951 = CIRCLE('',#12952,4.2E-02);+#12952 = AXIS2_PLACEMENT_3D('',#12953,#12954,#12955);+#12953 = CARTESIAN_POINT('',(2.16,-3.99529407561,0.147));+#12954 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#12955 = DIRECTION('',(0.,0.,1.));+#12956 = PCURVE('',#12390,#12957);+#12957 = DEFINITIONAL_REPRESENTATION('',(#12958),#12962);+#12958 = CIRCLE('',#12959,4.2E-02);+#12959 = AXIS2_PLACEMENT_2D('',#12960,#12961);+#12960 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#12961 = DIRECTION('',(1.,0.));+#12962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12963 = PCURVE('',#12582,#12964);+#12964 = DEFINITIONAL_REPRESENTATION('',(#12965),#12969);+#12965 = LINE('',#12966,#12967);+#12966 = CARTESIAN_POINT('',(0.,-9.E-02));+#12967 = VECTOR('',#12968,1.);+#12968 = DIRECTION('',(1.,0.));+#12969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12970 = ORIENTED_EDGE('',*,*,#12971,.T.);+#12971 = EDGE_CURVE('',#12948,#12972,#12974,.T.);+#12972 = VERTEX_POINT('',#12973);+#12973 = CARTESIAN_POINT('',(2.16,-4.43,0.105));+#12974 = SURFACE_CURVE('',#12975,(#12979,#12986),.PCURVE_S1.);+#12975 = LINE('',#12976,#12977);+#12976 = CARTESIAN_POINT('',(2.16,-3.938375,0.105));+#12977 = VECTOR('',#12978,1.);+#12978 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#12979 = PCURVE('',#12390,#12980);+#12980 = DEFINITIONAL_REPRESENTATION('',(#12981),#12985);+#12981 = LINE('',#12982,#12983);+#12982 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#12983 = VECTOR('',#12984,1.);+#12984 = DIRECTION('',(0.,1.));+#12985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12986 = PCURVE('',#12610,#12987);+#12987 = DEFINITIONAL_REPRESENTATION('',(#12988),#12992);+#12988 = LINE('',#12989,#12990);+#12989 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#12990 = VECTOR('',#12991,1.);+#12991 = DIRECTION('',(1.,0.));+#12992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12993 = ORIENTED_EDGE('',*,*,#12994,.T.);+#12994 = EDGE_CURVE('',#12972,#12995,#12997,.T.);+#12995 = VERTEX_POINT('',#12996);+#12996 = CARTESIAN_POINT('',(2.16,-4.43,0.));+#12997 = SURFACE_CURVE('',#12998,(#13002,#13009),.PCURVE_S1.);+#12998 = LINE('',#12999,#13000);+#12999 = CARTESIAN_POINT('',(2.16,-4.43,-8.142959240193E-02));+#13000 = VECTOR('',#13001,1.);+#13001 = DIRECTION('',(0.,0.,-1.));+#13002 = PCURVE('',#12390,#13003);+#13003 = DEFINITIONAL_REPRESENTATION('',(#13004),#13008);+#13004 = LINE('',#13005,#13006);+#13005 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#13006 = VECTOR('',#13007,1.);+#13007 = DIRECTION('',(-1.,0.));+#13008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13009 = PCURVE('',#12638,#13010);+#13010 = DEFINITIONAL_REPRESENTATION('',(#13011),#13015);+#13011 = LINE('',#13012,#13013);+#13012 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#13013 = VECTOR('',#13014,1.);+#13014 = DIRECTION('',(-1.,-0.));+#13015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13016 = ORIENTED_EDGE('',*,*,#13017,.F.);+#13017 = EDGE_CURVE('',#13018,#12995,#13020,.T.);+#13018 = VERTEX_POINT('',#13019);+#13019 = CARTESIAN_POINT('',(2.16,-3.99529407561,0.));+#13020 = SURFACE_CURVE('',#13021,(#13025,#13032),.PCURVE_S1.);+#13021 = LINE('',#13022,#13023);+#13022 = CARTESIAN_POINT('',(2.16,-3.938375,0.));+#13023 = VECTOR('',#13024,1.);+#13024 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13025 = PCURVE('',#12390,#13026);+#13026 = DEFINITIONAL_REPRESENTATION('',(#13027),#13031);+#13027 = LINE('',#13028,#13029);+#13028 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#13029 = VECTOR('',#13030,1.);+#13030 = DIRECTION('',(0.,1.));+#13031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13032 = PCURVE('',#12666,#13033);+#13033 = DEFINITIONAL_REPRESENTATION('',(#13034),#13038);+#13034 = LINE('',#13035,#13036);+#13035 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#13036 = VECTOR('',#13037,1.);+#13037 = DIRECTION('',(1.,0.));+#13038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13039 = ORIENTED_EDGE('',*,*,#13040,.T.);+#13040 = EDGE_CURVE('',#13018,#13041,#13043,.T.);+#13041 = VERTEX_POINT('',#13042);+#13042 = CARTESIAN_POINT('',(2.16,-3.865353350249,7.826567165848E-02));+#13043 = SURFACE_CURVE('',#13044,(#13049,#13056),.PCURVE_S1.);+#13044 = CIRCLE('',#13045,0.147);+#13045 = AXIS2_PLACEMENT_3D('',#13046,#13047,#13048);+#13046 = CARTESIAN_POINT('',(2.16,-3.99529407561,0.147));+#13047 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#13048 = DIRECTION('',(0.,0.,1.));+#13049 = PCURVE('',#12390,#13050);+#13050 = DEFINITIONAL_REPRESENTATION('',(#13051),#13055);+#13051 = CIRCLE('',#13052,0.147);+#13052 = AXIS2_PLACEMENT_2D('',#13053,#13054);+#13053 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#13054 = DIRECTION('',(1.,0.));+#13055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13056 = PCURVE('',#12695,#13057);+#13057 = DEFINITIONAL_REPRESENTATION('',(#13058),#13062);+#13058 = LINE('',#13059,#13060);+#13059 = CARTESIAN_POINT('',(0.,-9.E-02));+#13060 = VECTOR('',#13061,1.);+#13061 = DIRECTION('',(1.,0.));+#13062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13063 = ORIENTED_EDGE('',*,*,#13064,.F.);+#13064 = EDGE_CURVE('',#13065,#13041,#13067,.T.);+#13065 = VERTEX_POINT('',#13066);+#13066 = CARTESIAN_POINT('',(2.16,-3.560206845921,0.655138379526));+#13067 = SURFACE_CURVE('',#13068,(#13072,#13079),.PCURVE_S1.);+#13068 = LINE('',#13069,#13070);+#13069 = CARTESIAN_POINT('',(2.16,-3.533592598085,0.705452025592));+#13070 = VECTOR('',#13071,1.);+#13071 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#13072 = PCURVE('',#12390,#13073);+#13073 = DEFINITIONAL_REPRESENTATION('',(#13074),#13078);+#13074 = LINE('',#13075,#13076);+#13075 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#13076 = VECTOR('',#13077,1.);+#13077 = DIRECTION('',(-0.883950512662,0.467580464908));+#13078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13079 = PCURVE('',#12723,#13080);+#13080 = DEFINITIONAL_REPRESENTATION('',(#13081),#13085);+#13081 = LINE('',#13082,#13083);+#13082 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#13083 = VECTOR('',#13084,1.);+#13084 = DIRECTION('',(1.,-2.399596746007E-32));+#13085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13086 = ORIENTED_EDGE('',*,*,#13087,.F.);+#13087 = EDGE_CURVE('',#13088,#13065,#13090,.T.);+#13088 = VERTEX_POINT('',#13089);+#13089 = CARTESIAN_POINT('',(2.16,-3.52308092439,0.6775));+#13090 = SURFACE_CURVE('',#13091,(#13096,#13103),.PCURVE_S1.);+#13091 = CIRCLE('',#13092,4.2E-02);+#13092 = AXIS2_PLACEMENT_3D('',#13093,#13094,#13095);+#13093 = CARTESIAN_POINT('',(2.16,-3.52308092439,0.6355));+#13094 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#13095 = DIRECTION('',(0.,0.,1.));+#13096 = PCURVE('',#12390,#13097);+#13097 = DEFINITIONAL_REPRESENTATION('',(#13098),#13102);+#13098 = CIRCLE('',#13099,4.2E-02);+#13099 = AXIS2_PLACEMENT_2D('',#13100,#13101);+#13100 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#13101 = DIRECTION('',(1.,0.));+#13102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13103 = PCURVE('',#12752,#13104);+#13104 = DEFINITIONAL_REPRESENTATION('',(#13105),#13109);+#13105 = LINE('',#13106,#13107);+#13106 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#13107 = VECTOR('',#13108,1.);+#13108 = DIRECTION('',(1.,0.));+#13109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13110 = ORIENTED_EDGE('',*,*,#13111,.F.);+#13111 = EDGE_CURVE('',#13112,#13088,#13114,.T.);+#13112 = VERTEX_POINT('',#13113);+#13113 = CARTESIAN_POINT('',(2.16,-3.25,0.6775));+#13114 = SURFACE_CURVE('',#13115,(#13119,#13126),.PCURVE_S1.);+#13115 = LINE('',#13116,#13117);+#13116 = CARTESIAN_POINT('',(2.16,-3.25,0.6775));+#13117 = VECTOR('',#13118,1.);+#13118 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13119 = PCURVE('',#12390,#13120);+#13120 = DEFINITIONAL_REPRESENTATION('',(#13121),#13125);+#13121 = LINE('',#13122,#13123);+#13122 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#13123 = VECTOR('',#13124,1.);+#13124 = DIRECTION('',(0.,1.));+#13125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13126 = PCURVE('',#12780,#13127);+#13127 = DEFINITIONAL_REPRESENTATION('',(#13128),#13132);+#13128 = LINE('',#13129,#13130);+#13129 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#13130 = VECTOR('',#13131,1.);+#13131 = DIRECTION('',(1.,0.));+#13132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13133 = ORIENTED_EDGE('',*,*,#13134,.F.);+#13134 = EDGE_CURVE('',#12851,#13112,#13135,.T.);+#13135 = SURFACE_CURVE('',#13136,(#13141,#13152),.PCURVE_S1.);+#13136 = CIRCLE('',#13137,5.25E-02);+#13137 = AXIS2_PLACEMENT_3D('',#13138,#13139,#13140);+#13138 = CARTESIAN_POINT('',(2.16,-3.25,0.73));+#13139 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13140 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13141 = PCURVE('',#12390,#13142);+#13142 = DEFINITIONAL_REPRESENTATION('',(#13143),#13151);+#13143 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13144,#13145,#13146,#13147+ ,#13148,#13149,#13150),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13144 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#13145 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#13146 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#13147 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#13148 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#13149 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#13150 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#13151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13152 = PCURVE('',#12813,#13153);+#13153 = DEFINITIONAL_REPRESENTATION('',(#13154),#13158);+#13154 = LINE('',#13155,#13156);+#13155 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#13156 = VECTOR('',#13157,1.);+#13157 = DIRECTION('',(-1.,0.));+#13158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13159 = ORIENTED_EDGE('',*,*,#12850,.F.);+#13160 = ADVANCED_FACE('',(#13161),#12475,.T.);+#13161 = FACE_BOUND('',#13162,.T.);+#13162 = EDGE_LOOP('',(#13163,#13164,#13165,#13186));+#13163 = ORIENTED_EDGE('',*,*,#12459,.F.);+#13164 = ORIENTED_EDGE('',*,*,#12900,.T.);+#13165 = ORIENTED_EDGE('',*,*,#13166,.T.);+#13166 = EDGE_CURVE('',#12901,#12514,#13167,.T.);+#13167 = SURFACE_CURVE('',#13168,(#13172,#13179),.PCURVE_S1.);+#13168 = LINE('',#13169,#13170);+#13169 = CARTESIAN_POINT('',(2.16,-3.653021649751,0.704234328342));+#13170 = VECTOR('',#13171,1.);+#13171 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13172 = PCURVE('',#12475,#13173);+#13173 = DEFINITIONAL_REPRESENTATION('',(#13174),#13178);+#13174 = LINE('',#13175,#13176);+#13175 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#13176 = VECTOR('',#13177,1.);+#13177 = DIRECTION('',(-0.,1.));+#13178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13179 = PCURVE('',#12553,#13180);+#13180 = DEFINITIONAL_REPRESENTATION('',(#13181),#13185);+#13181 = LINE('',#13182,#13183);+#13182 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#13183 = VECTOR('',#13184,1.);+#13184 = DIRECTION('',(4.767113258106E-29,1.));+#13185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13186 = ORIENTED_EDGE('',*,*,#12513,.F.);+#13187 = ADVANCED_FACE('',(#13188),#12813,.T.);+#13188 = FACE_BOUND('',#13189,.T.);+#13189 = EDGE_LOOP('',(#13190,#13191,#13212,#13213));+#13190 = ORIENTED_EDGE('',*,*,#12792,.T.);+#13191 = ORIENTED_EDGE('',*,*,#13192,.T.);+#13192 = EDGE_CURVE('',#12765,#13112,#13193,.T.);+#13193 = SURFACE_CURVE('',#13194,(#13198,#13205),.PCURVE_S1.);+#13194 = LINE('',#13195,#13196);+#13195 = CARTESIAN_POINT('',(2.34,-3.25,0.6775));+#13196 = VECTOR('',#13197,1.);+#13197 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13198 = PCURVE('',#12813,#13199);+#13199 = DEFINITIONAL_REPRESENTATION('',(#13200),#13204);+#13200 = LINE('',#13201,#13202);+#13201 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#13202 = VECTOR('',#13203,1.);+#13203 = DIRECTION('',(-0.,-1.));+#13204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13205 = PCURVE('',#12780,#13206);+#13206 = DEFINITIONAL_REPRESENTATION('',(#13207),#13211);+#13207 = LINE('',#13208,#13209);+#13208 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#13209 = VECTOR('',#13210,1.);+#13210 = DIRECTION('',(0.,-1.));+#13211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13212 = ORIENTED_EDGE('',*,*,#13134,.F.);+#13213 = ORIENTED_EDGE('',*,*,#12873,.T.);+#13214 = ADVANCED_FACE('',(#13215),#12780,.F.);+#13215 = FACE_BOUND('',#13216,.F.);+#13216 = EDGE_LOOP('',(#13217,#13218,#13239,#13240));+#13217 = ORIENTED_EDGE('',*,*,#13111,.T.);+#13218 = ORIENTED_EDGE('',*,*,#13219,.F.);+#13219 = EDGE_CURVE('',#12736,#13088,#13220,.T.);+#13220 = SURFACE_CURVE('',#13221,(#13225,#13232),.PCURVE_S1.);+#13221 = LINE('',#13222,#13223);+#13222 = CARTESIAN_POINT('',(2.34,-3.52308092439,0.6775));+#13223 = VECTOR('',#13224,1.);+#13224 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13225 = PCURVE('',#12780,#13226);+#13226 = DEFINITIONAL_REPRESENTATION('',(#13227),#13231);+#13227 = LINE('',#13228,#13229);+#13228 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#13229 = VECTOR('',#13230,1.);+#13230 = DIRECTION('',(0.,-1.));+#13231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13232 = PCURVE('',#12752,#13233);+#13233 = DEFINITIONAL_REPRESENTATION('',(#13234),#13238);+#13234 = LINE('',#13235,#13236);+#13235 = CARTESIAN_POINT('',(0.,9.E-02));+#13236 = VECTOR('',#13237,1.);+#13237 = DIRECTION('',(0.,-1.));+#13238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13239 = ORIENTED_EDGE('',*,*,#12764,.F.);+#13240 = ORIENTED_EDGE('',*,*,#13192,.T.);+#13241 = ADVANCED_FACE('',(#13242),#12752,.F.);+#13242 = FACE_BOUND('',#13243,.F.);+#13243 = EDGE_LOOP('',(#13244,#13245,#13266,#13267));+#13244 = ORIENTED_EDGE('',*,*,#13087,.T.);+#13245 = ORIENTED_EDGE('',*,*,#13246,.F.);+#13246 = EDGE_CURVE('',#12708,#13065,#13247,.T.);+#13247 = SURFACE_CURVE('',#13248,(#13252,#13259),.PCURVE_S1.);+#13248 = LINE('',#13249,#13250);+#13249 = CARTESIAN_POINT('',(2.34,-3.560206845921,0.655138379526));+#13250 = VECTOR('',#13251,1.);+#13251 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13252 = PCURVE('',#12752,#13253);+#13253 = DEFINITIONAL_REPRESENTATION('',(#13254),#13258);+#13254 = LINE('',#13255,#13256);+#13255 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#13256 = VECTOR('',#13257,1.);+#13257 = DIRECTION('',(0.,-1.));+#13258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13259 = PCURVE('',#12723,#13260);+#13260 = DEFINITIONAL_REPRESENTATION('',(#13261),#13265);+#13261 = LINE('',#13262,#13263);+#13262 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#13263 = VECTOR('',#13264,1.);+#13264 = DIRECTION('',(-4.767113258106E-29,-1.));+#13265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13266 = ORIENTED_EDGE('',*,*,#12735,.F.);+#13267 = ORIENTED_EDGE('',*,*,#13219,.T.);+#13268 = ADVANCED_FACE('',(#13269),#12723,.F.);+#13269 = FACE_BOUND('',#13270,.F.);+#13270 = EDGE_LOOP('',(#13271,#13272,#13293,#13294));+#13271 = ORIENTED_EDGE('',*,*,#13064,.T.);+#13272 = ORIENTED_EDGE('',*,*,#13273,.F.);+#13273 = EDGE_CURVE('',#12679,#13041,#13274,.T.);+#13274 = SURFACE_CURVE('',#13275,(#13279,#13286),.PCURVE_S1.);+#13275 = LINE('',#13276,#13277);+#13276 = CARTESIAN_POINT('',(2.34,-3.865353350249,7.826567165848E-02));+#13277 = VECTOR('',#13278,1.);+#13278 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13279 = PCURVE('',#12723,#13280);+#13280 = DEFINITIONAL_REPRESENTATION('',(#13281),#13285);+#13281 = LINE('',#13282,#13283);+#13282 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#13283 = VECTOR('',#13284,1.);+#13284 = DIRECTION('',(-4.767113258106E-29,-1.));+#13285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13286 = PCURVE('',#12695,#13287);+#13287 = DEFINITIONAL_REPRESENTATION('',(#13288),#13292);+#13288 = LINE('',#13289,#13290);+#13289 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#13290 = VECTOR('',#13291,1.);+#13291 = DIRECTION('',(0.,-1.));+#13292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13293 = ORIENTED_EDGE('',*,*,#12707,.F.);+#13294 = ORIENTED_EDGE('',*,*,#13246,.T.);+#13295 = ADVANCED_FACE('',(#13296),#12695,.T.);+#13296 = FACE_BOUND('',#13297,.T.);+#13297 = EDGE_LOOP('',(#13298,#13299,#13300,#13301));+#13298 = ORIENTED_EDGE('',*,*,#13040,.T.);+#13299 = ORIENTED_EDGE('',*,*,#13273,.F.);+#13300 = ORIENTED_EDGE('',*,*,#12678,.F.);+#13301 = ORIENTED_EDGE('',*,*,#13302,.T.);+#13302 = EDGE_CURVE('',#12651,#13018,#13303,.T.);+#13303 = SURFACE_CURVE('',#13304,(#13308,#13315),.PCURVE_S1.);+#13304 = LINE('',#13305,#13306);+#13305 = CARTESIAN_POINT('',(2.34,-3.99529407561,0.));+#13306 = VECTOR('',#13307,1.);+#13307 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13308 = PCURVE('',#12695,#13309);+#13309 = DEFINITIONAL_REPRESENTATION('',(#13310),#13314);+#13310 = LINE('',#13311,#13312);+#13311 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#13312 = VECTOR('',#13313,1.);+#13313 = DIRECTION('',(0.,-1.));+#13314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13315 = PCURVE('',#12666,#13316);+#13316 = DEFINITIONAL_REPRESENTATION('',(#13317),#13321);+#13317 = LINE('',#13318,#13319);+#13318 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#13319 = VECTOR('',#13320,1.);+#13320 = DIRECTION('',(0.,-1.));+#13321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13322 = ADVANCED_FACE('',(#13323),#12666,.F.);+#13323 = FACE_BOUND('',#13324,.F.);+#13324 = EDGE_LOOP('',(#13325,#13326,#13327,#13348));+#13325 = ORIENTED_EDGE('',*,*,#13302,.T.);+#13326 = ORIENTED_EDGE('',*,*,#13017,.T.);+#13327 = ORIENTED_EDGE('',*,*,#13328,.T.);+#13328 = EDGE_CURVE('',#12995,#12623,#13329,.T.);+#13329 = SURFACE_CURVE('',#13330,(#13334,#13341),.PCURVE_S1.);+#13330 = LINE('',#13331,#13332);+#13331 = CARTESIAN_POINT('',(1.955,-4.43,0.));+#13332 = VECTOR('',#13333,1.);+#13333 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13334 = PCURVE('',#12666,#13335);+#13335 = DEFINITIONAL_REPRESENTATION('',(#13336),#13340);+#13336 = LINE('',#13337,#13338);+#13337 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#13338 = VECTOR('',#13339,1.);+#13339 = DIRECTION('',(0.,1.));+#13340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13341 = PCURVE('',#12638,#13342);+#13342 = DEFINITIONAL_REPRESENTATION('',(#13343),#13347);+#13343 = LINE('',#13344,#13345);+#13344 = CARTESIAN_POINT('',(0.5,-0.295));+#13345 = VECTOR('',#13346,1.);+#13346 = DIRECTION('',(0.,-1.));+#13347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13348 = ORIENTED_EDGE('',*,*,#12650,.F.);+#13349 = ADVANCED_FACE('',(#13350),#12638,.T.);+#13350 = FACE_BOUND('',#13351,.T.);+#13351 = EDGE_LOOP('',(#13352,#13353,#13374,#13375));+#13352 = ORIENTED_EDGE('',*,*,#12622,.F.);+#13353 = ORIENTED_EDGE('',*,*,#13354,.F.);+#13354 = EDGE_CURVE('',#12972,#12595,#13355,.T.);+#13355 = SURFACE_CURVE('',#13356,(#13360,#13367),.PCURVE_S1.);+#13356 = LINE('',#13357,#13358);+#13357 = CARTESIAN_POINT('',(1.955,-4.43,0.105));+#13358 = VECTOR('',#13359,1.);+#13359 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13360 = PCURVE('',#12638,#13361);+#13361 = DEFINITIONAL_REPRESENTATION('',(#13362),#13366);+#13362 = LINE('',#13363,#13364);+#13363 = CARTESIAN_POINT('',(0.605,-0.295));+#13364 = VECTOR('',#13365,1.);+#13365 = DIRECTION('',(0.,-1.));+#13366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13367 = PCURVE('',#12610,#13368);+#13368 = DEFINITIONAL_REPRESENTATION('',(#13369),#13373);+#13369 = LINE('',#13370,#13371);+#13370 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#13371 = VECTOR('',#13372,1.);+#13372 = DIRECTION('',(0.,1.));+#13373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13374 = ORIENTED_EDGE('',*,*,#12994,.T.);+#13375 = ORIENTED_EDGE('',*,*,#13328,.T.);+#13376 = ADVANCED_FACE('',(#13377),#12610,.T.);+#13377 = FACE_BOUND('',#13378,.T.);+#13378 = EDGE_LOOP('',(#13379,#13400,#13401,#13402));+#13379 = ORIENTED_EDGE('',*,*,#13380,.T.);+#13380 = EDGE_CURVE('',#12566,#12948,#13381,.T.);+#13381 = SURFACE_CURVE('',#13382,(#13386,#13393),.PCURVE_S1.);+#13382 = LINE('',#13383,#13384);+#13383 = CARTESIAN_POINT('',(2.34,-3.99529407561,0.105));+#13384 = VECTOR('',#13385,1.);+#13385 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13386 = PCURVE('',#12610,#13387);+#13387 = DEFINITIONAL_REPRESENTATION('',(#13388),#13392);+#13388 = LINE('',#13389,#13390);+#13389 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#13390 = VECTOR('',#13391,1.);+#13391 = DIRECTION('',(0.,-1.));+#13392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13393 = PCURVE('',#12582,#13394);+#13394 = DEFINITIONAL_REPRESENTATION('',(#13395),#13399);+#13395 = LINE('',#13396,#13397);+#13396 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#13397 = VECTOR('',#13398,1.);+#13398 = DIRECTION('',(0.,-1.));+#13399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13400 = ORIENTED_EDGE('',*,*,#12971,.T.);+#13401 = ORIENTED_EDGE('',*,*,#13354,.T.);+#13402 = ORIENTED_EDGE('',*,*,#12594,.F.);+#13403 = ADVANCED_FACE('',(#13404),#12582,.F.);+#13404 = FACE_BOUND('',#13405,.F.);+#13405 = EDGE_LOOP('',(#13406,#13407,#13428,#13429));+#13406 = ORIENTED_EDGE('',*,*,#12947,.T.);+#13407 = ORIENTED_EDGE('',*,*,#13408,.F.);+#13408 = EDGE_CURVE('',#12538,#12925,#13409,.T.);+#13409 = SURFACE_CURVE('',#13410,(#13414,#13421),.PCURVE_S1.);+#13410 = LINE('',#13411,#13412);+#13411 = CARTESIAN_POINT('',(2.34,-3.958168154079,0.127361620474));+#13412 = VECTOR('',#13413,1.);+#13413 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13414 = PCURVE('',#12582,#13415);+#13415 = DEFINITIONAL_REPRESENTATION('',(#13416),#13420);+#13416 = LINE('',#13417,#13418);+#13417 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#13418 = VECTOR('',#13419,1.);+#13419 = DIRECTION('',(0.,-1.));+#13420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13421 = PCURVE('',#12553,#13422);+#13422 = DEFINITIONAL_REPRESENTATION('',(#13423),#13427);+#13423 = LINE('',#13424,#13425);+#13424 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#13425 = VECTOR('',#13426,1.);+#13426 = DIRECTION('',(-4.767113258106E-29,-1.));+#13427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13428 = ORIENTED_EDGE('',*,*,#12565,.F.);+#13429 = ORIENTED_EDGE('',*,*,#13380,.T.);+#13430 = ADVANCED_FACE('',(#13431),#12553,.T.);+#13431 = FACE_BOUND('',#13432,.T.);+#13432 = EDGE_LOOP('',(#13433,#13434,#13435,#13436));+#13433 = ORIENTED_EDGE('',*,*,#13166,.F.);+#13434 = ORIENTED_EDGE('',*,*,#12924,.T.);+#13435 = ORIENTED_EDGE('',*,*,#13408,.F.);+#13436 = ORIENTED_EDGE('',*,*,#12537,.F.);+#13437 = MANIFOLD_SOLID_BREP('',#13438);+#13438 = CLOSED_SHELL('',(#13439,#13569,#13645,#13983,#14032,#14298,+ #14325,#14352,#14379,#14406,#14433,#14460,#14487,#14514,#14541,+ #14568));+#13439 = ADVANCED_FACE('',(#13440),#13455,.T.);+#13440 = FACE_BOUND('',#13441,.T.);+#13441 = EDGE_LOOP('',(#13442,#13482,#13510,#13543));+#13442 = ORIENTED_EDGE('',*,*,#13443,.T.);+#13443 = EDGE_CURVE('',#13444,#13446,#13448,.T.);+#13444 = VERTEX_POINT('',#13445);+#13445 = CARTESIAN_POINT('',(2.84,-3.25,0.7825));+#13446 = VERTEX_POINT('',#13447);+#13447 = CARTESIAN_POINT('',(2.84,-3.2,0.746007810594));+#13448 = SURFACE_CURVE('',#13449,(#13454,#13466),.PCURVE_S1.);+#13449 = CIRCLE('',#13450,5.25E-02);+#13450 = AXIS2_PLACEMENT_3D('',#13451,#13452,#13453);+#13451 = CARTESIAN_POINT('',(2.84,-3.25,0.73));+#13452 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13453 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13454 = PCURVE('',#13455,#13460);+#13455 = CYLINDRICAL_SURFACE('',#13456,5.25E-02);+#13456 = AXIS2_PLACEMENT_3D('',#13457,#13458,#13459);+#13457 = CARTESIAN_POINT('',(2.75,-3.25,0.73));+#13458 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13459 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13460 = DEFINITIONAL_REPRESENTATION('',(#13461),#13465);+#13461 = LINE('',#13462,#13463);+#13462 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#13463 = VECTOR('',#13464,1.);+#13464 = DIRECTION('',(-1.,-0.));+#13465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13466 = PCURVE('',#13467,#13472);+#13467 = PLANE('',#13468);+#13468 = AXIS2_PLACEMENT_3D('',#13469,#13470,#13471);+#13469 = CARTESIAN_POINT('',(2.84,-3.861815252728,0.337140815196));+#13470 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13471 = DIRECTION('',(0.,0.,1.));+#13472 = DEFINITIONAL_REPRESENTATION('',(#13473),#13481);+#13473 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13474,#13475,#13476,#13477+ ,#13478,#13479,#13480),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13474 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#13475 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#13476 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#13477 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#13478 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#13479 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#13480 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#13481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13482 = ORIENTED_EDGE('',*,*,#13483,.F.);+#13483 = EDGE_CURVE('',#13484,#13446,#13486,.T.);+#13484 = VERTEX_POINT('',#13485);+#13485 = CARTESIAN_POINT('',(2.66,-3.2,0.746007810594));+#13486 = SURFACE_CURVE('',#13487,(#13491,#13498),.PCURVE_S1.);+#13487 = LINE('',#13488,#13489);+#13488 = CARTESIAN_POINT('',(2.75,-3.2,0.746007810594));+#13489 = VECTOR('',#13490,1.);+#13490 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13491 = PCURVE('',#13455,#13492);+#13492 = DEFINITIONAL_REPRESENTATION('',(#13493),#13497);+#13493 = LINE('',#13494,#13495);+#13494 = CARTESIAN_POINT('',(3.451437293332,0.));+#13495 = VECTOR('',#13496,1.);+#13496 = DIRECTION('',(-0.,1.));+#13497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13498 = PCURVE('',#13499,#13504);+#13499 = PLANE('',#13500);+#13500 = AXIS2_PLACEMENT_3D('',#13501,#13502,#13503);+#13501 = CARTESIAN_POINT('',(2.16,-3.2,-0.5));+#13502 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13503 = DIRECTION('',(0.,0.,1.));+#13504 = DEFINITIONAL_REPRESENTATION('',(#13505),#13509);+#13505 = LINE('',#13506,#13507);+#13506 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#13507 = VECTOR('',#13508,1.);+#13508 = DIRECTION('',(0.,-1.));+#13509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13510 = ORIENTED_EDGE('',*,*,#13511,.F.);+#13511 = EDGE_CURVE('',#13512,#13484,#13514,.T.);+#13512 = VERTEX_POINT('',#13513);+#13513 = CARTESIAN_POINT('',(2.66,-3.25,0.7825));+#13514 = SURFACE_CURVE('',#13515,(#13520,#13527),.PCURVE_S1.);+#13515 = CIRCLE('',#13516,5.25E-02);+#13516 = AXIS2_PLACEMENT_3D('',#13517,#13518,#13519);+#13517 = CARTESIAN_POINT('',(2.66,-3.25,0.73));+#13518 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13519 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13520 = PCURVE('',#13455,#13521);+#13521 = DEFINITIONAL_REPRESENTATION('',(#13522),#13526);+#13522 = LINE('',#13523,#13524);+#13523 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#13524 = VECTOR('',#13525,1.);+#13525 = DIRECTION('',(-1.,0.));+#13526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13527 = PCURVE('',#13528,#13533);+#13528 = PLANE('',#13529);+#13529 = AXIS2_PLACEMENT_3D('',#13530,#13531,#13532);+#13530 = CARTESIAN_POINT('',(2.66,-3.861815252728,0.337140815196));+#13531 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13532 = DIRECTION('',(0.,0.,1.));+#13533 = DEFINITIONAL_REPRESENTATION('',(#13534),#13542);+#13534 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13535,#13536,#13537,#13538+ ,#13539,#13540,#13541),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13535 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#13536 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#13537 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#13538 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#13539 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#13540 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#13541 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#13542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13543 = ORIENTED_EDGE('',*,*,#13544,.T.);+#13544 = EDGE_CURVE('',#13512,#13444,#13545,.T.);+#13545 = SURFACE_CURVE('',#13546,(#13550,#13557),.PCURVE_S1.);+#13546 = LINE('',#13547,#13548);+#13547 = CARTESIAN_POINT('',(2.66,-3.25,0.7825));+#13548 = VECTOR('',#13549,1.);+#13549 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13550 = PCURVE('',#13455,#13551);+#13551 = DEFINITIONAL_REPRESENTATION('',(#13552),#13556);+#13552 = LINE('',#13553,#13554);+#13553 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#13554 = VECTOR('',#13555,1.);+#13555 = DIRECTION('',(0.,1.));+#13556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13557 = PCURVE('',#13558,#13563);+#13558 = PLANE('',#13559);+#13559 = AXIS2_PLACEMENT_3D('',#13560,#13561,#13562);+#13560 = CARTESIAN_POINT('',(2.75,-3.25,0.7825));+#13561 = DIRECTION('',(0.,0.,1.));+#13562 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13563 = DEFINITIONAL_REPRESENTATION('',(#13564),#13568);+#13564 = LINE('',#13565,#13566);+#13565 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#13566 = VECTOR('',#13567,1.);+#13567 = DIRECTION('',(0.,1.));+#13568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13569 = ADVANCED_FACE('',(#13570),#13558,.T.);+#13570 = FACE_BOUND('',#13571,.T.);+#13571 = EDGE_LOOP('',(#13572,#13573,#13596,#13624));+#13572 = ORIENTED_EDGE('',*,*,#13544,.F.);+#13573 = ORIENTED_EDGE('',*,*,#13574,.T.);+#13574 = EDGE_CURVE('',#13512,#13575,#13577,.T.);+#13575 = VERTEX_POINT('',#13576);+#13576 = CARTESIAN_POINT('',(2.66,-3.52308092439,0.7825));+#13577 = SURFACE_CURVE('',#13578,(#13582,#13589),.PCURVE_S1.);+#13578 = LINE('',#13579,#13580);+#13579 = CARTESIAN_POINT('',(2.66,-3.25,0.7825));+#13580 = VECTOR('',#13581,1.);+#13581 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13582 = PCURVE('',#13558,#13583);+#13583 = DEFINITIONAL_REPRESENTATION('',(#13584),#13588);+#13584 = LINE('',#13585,#13586);+#13585 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#13586 = VECTOR('',#13587,1.);+#13587 = DIRECTION('',(1.,0.));+#13588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13589 = PCURVE('',#13528,#13590);+#13590 = DEFINITIONAL_REPRESENTATION('',(#13591),#13595);+#13591 = LINE('',#13592,#13593);+#13592 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#13593 = VECTOR('',#13594,1.);+#13594 = DIRECTION('',(0.,1.));+#13595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13596 = ORIENTED_EDGE('',*,*,#13597,.T.);+#13597 = EDGE_CURVE('',#13575,#13598,#13600,.T.);+#13598 = VERTEX_POINT('',#13599);+#13599 = CARTESIAN_POINT('',(2.84,-3.52308092439,0.7825));+#13600 = SURFACE_CURVE('',#13601,(#13605,#13612),.PCURVE_S1.);+#13601 = LINE('',#13602,#13603);+#13602 = CARTESIAN_POINT('',(2.66,-3.52308092439,0.7825));+#13603 = VECTOR('',#13604,1.);+#13604 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13605 = PCURVE('',#13558,#13606);+#13606 = DEFINITIONAL_REPRESENTATION('',(#13607),#13611);+#13607 = LINE('',#13608,#13609);+#13608 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#13609 = VECTOR('',#13610,1.);+#13610 = DIRECTION('',(0.,1.));+#13611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13612 = PCURVE('',#13613,#13618);+#13613 = CYLINDRICAL_SURFACE('',#13614,0.147);+#13614 = AXIS2_PLACEMENT_3D('',#13615,#13616,#13617);+#13615 = CARTESIAN_POINT('',(2.75,-3.52308092439,0.6355));+#13616 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13617 = DIRECTION('',(0.,0.,1.));+#13618 = DEFINITIONAL_REPRESENTATION('',(#13619),#13623);+#13619 = LINE('',#13620,#13621);+#13620 = CARTESIAN_POINT('',(0.,-9.E-02));+#13621 = VECTOR('',#13622,1.);+#13622 = DIRECTION('',(-0.,1.));+#13623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13624 = ORIENTED_EDGE('',*,*,#13625,.F.);+#13625 = EDGE_CURVE('',#13444,#13598,#13626,.T.);+#13626 = SURFACE_CURVE('',#13627,(#13631,#13638),.PCURVE_S1.);+#13627 = LINE('',#13628,#13629);+#13628 = CARTESIAN_POINT('',(2.84,-3.25,0.7825));+#13629 = VECTOR('',#13630,1.);+#13630 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13631 = PCURVE('',#13558,#13632);+#13632 = DEFINITIONAL_REPRESENTATION('',(#13633),#13637);+#13633 = LINE('',#13634,#13635);+#13634 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#13635 = VECTOR('',#13636,1.);+#13636 = DIRECTION('',(1.,0.));+#13637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13638 = PCURVE('',#13467,#13639);+#13639 = DEFINITIONAL_REPRESENTATION('',(#13640),#13644);+#13640 = LINE('',#13641,#13642);+#13641 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#13642 = VECTOR('',#13643,1.);+#13643 = DIRECTION('',(0.,1.));+#13644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13645 = ADVANCED_FACE('',(#13646),#13467,.T.);+#13646 = FACE_BOUND('',#13647,.T.);+#13647 = EDGE_LOOP('',(#13648,#13649,#13650,#13674,#13702,#13731,#13759,+ #13787,#13815,#13844,#13872,#13901,#13929,#13962));+#13648 = ORIENTED_EDGE('',*,*,#13443,.F.);+#13649 = ORIENTED_EDGE('',*,*,#13625,.T.);+#13650 = ORIENTED_EDGE('',*,*,#13651,.T.);+#13651 = EDGE_CURVE('',#13598,#13652,#13654,.T.);+#13652 = VERTEX_POINT('',#13653);+#13653 = CARTESIAN_POINT('',(2.84,-3.653021649751,0.704234328342));+#13654 = SURFACE_CURVE('',#13655,(#13660,#13667),.PCURVE_S1.);+#13655 = CIRCLE('',#13656,0.147);+#13656 = AXIS2_PLACEMENT_3D('',#13657,#13658,#13659);+#13657 = CARTESIAN_POINT('',(2.84,-3.52308092439,0.6355));+#13658 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#13659 = DIRECTION('',(0.,0.,1.));+#13660 = PCURVE('',#13467,#13661);+#13661 = DEFINITIONAL_REPRESENTATION('',(#13662),#13666);+#13662 = CIRCLE('',#13663,0.147);+#13663 = AXIS2_PLACEMENT_2D('',#13664,#13665);+#13664 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#13665 = DIRECTION('',(1.,0.));+#13666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13667 = PCURVE('',#13613,#13668);+#13668 = DEFINITIONAL_REPRESENTATION('',(#13669),#13673);+#13669 = LINE('',#13670,#13671);+#13670 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#13671 = VECTOR('',#13672,1.);+#13672 = DIRECTION('',(1.,-0.));+#13673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13674 = ORIENTED_EDGE('',*,*,#13675,.T.);+#13675 = EDGE_CURVE('',#13652,#13676,#13678,.T.);+#13676 = VERTEX_POINT('',#13677);+#13677 = CARTESIAN_POINT('',(2.84,-3.958168154079,0.127361620474));+#13678 = SURFACE_CURVE('',#13679,(#13683,#13690),.PCURVE_S1.);+#13679 = LINE('',#13680,#13681);+#13680 = CARTESIAN_POINT('',(2.84,-3.626407401915,0.754547974408));+#13681 = VECTOR('',#13682,1.);+#13682 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#13683 = PCURVE('',#13467,#13684);+#13684 = DEFINITIONAL_REPRESENTATION('',(#13685),#13689);+#13685 = LINE('',#13686,#13687);+#13686 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#13687 = VECTOR('',#13688,1.);+#13688 = DIRECTION('',(-0.883950512662,0.467580464908));+#13689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13690 = PCURVE('',#13691,#13696);+#13691 = PLANE('',#13692);+#13692 = AXIS2_PLACEMENT_3D('',#13693,#13694,#13695);+#13693 = CARTESIAN_POINT('',(2.75,-3.653021649751,0.704234328342));+#13694 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908+ ));+#13695 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#13696 = DEFINITIONAL_REPRESENTATION('',(#13697),#13701);+#13697 = LINE('',#13698,#13699);+#13698 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#13699 = VECTOR('',#13700,1.);+#13700 = DIRECTION('',(1.,-2.399596746007E-32));+#13701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13702 = ORIENTED_EDGE('',*,*,#13703,.F.);+#13703 = EDGE_CURVE('',#13704,#13676,#13706,.T.);+#13704 = VERTEX_POINT('',#13705);+#13705 = CARTESIAN_POINT('',(2.84,-3.99529407561,0.105));+#13706 = SURFACE_CURVE('',#13707,(#13712,#13719),.PCURVE_S1.);+#13707 = CIRCLE('',#13708,4.2E-02);+#13708 = AXIS2_PLACEMENT_3D('',#13709,#13710,#13711);+#13709 = CARTESIAN_POINT('',(2.84,-3.99529407561,0.147));+#13710 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#13711 = DIRECTION('',(0.,0.,1.));+#13712 = PCURVE('',#13467,#13713);+#13713 = DEFINITIONAL_REPRESENTATION('',(#13714),#13718);+#13714 = CIRCLE('',#13715,4.2E-02);+#13715 = AXIS2_PLACEMENT_2D('',#13716,#13717);+#13716 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#13717 = DIRECTION('',(1.,0.));+#13718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13719 = PCURVE('',#13720,#13725);+#13720 = CYLINDRICAL_SURFACE('',#13721,4.2E-02);+#13721 = AXIS2_PLACEMENT_3D('',#13722,#13723,#13724);+#13722 = CARTESIAN_POINT('',(2.75,-3.99529407561,0.147));+#13723 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13724 = DIRECTION('',(0.,0.,1.));+#13725 = DEFINITIONAL_REPRESENTATION('',(#13726),#13730);+#13726 = LINE('',#13727,#13728);+#13727 = CARTESIAN_POINT('',(-0.,9.E-02));+#13728 = VECTOR('',#13729,1.);+#13729 = DIRECTION('',(1.,-0.));+#13730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13731 = ORIENTED_EDGE('',*,*,#13732,.T.);+#13732 = EDGE_CURVE('',#13704,#13733,#13735,.T.);+#13733 = VERTEX_POINT('',#13734);+#13734 = CARTESIAN_POINT('',(2.84,-4.43,0.105));+#13735 = SURFACE_CURVE('',#13736,(#13740,#13747),.PCURVE_S1.);+#13736 = LINE('',#13737,#13738);+#13737 = CARTESIAN_POINT('',(2.84,-3.938375,0.105));+#13738 = VECTOR('',#13739,1.);+#13739 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13740 = PCURVE('',#13467,#13741);+#13741 = DEFINITIONAL_REPRESENTATION('',(#13742),#13746);+#13742 = LINE('',#13743,#13744);+#13743 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#13744 = VECTOR('',#13745,1.);+#13745 = DIRECTION('',(0.,1.));+#13746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13747 = PCURVE('',#13748,#13753);+#13748 = PLANE('',#13749);+#13749 = AXIS2_PLACEMENT_3D('',#13750,#13751,#13752);+#13750 = CARTESIAN_POINT('',(2.75,-3.99529407561,0.105));+#13751 = DIRECTION('',(0.,0.,1.));+#13752 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13753 = DEFINITIONAL_REPRESENTATION('',(#13754),#13758);+#13754 = LINE('',#13755,#13756);+#13755 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#13756 = VECTOR('',#13757,1.);+#13757 = DIRECTION('',(1.,0.));+#13758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13759 = ORIENTED_EDGE('',*,*,#13760,.T.);+#13760 = EDGE_CURVE('',#13733,#13761,#13763,.T.);+#13761 = VERTEX_POINT('',#13762);+#13762 = CARTESIAN_POINT('',(2.84,-4.43,0.));+#13763 = SURFACE_CURVE('',#13764,(#13768,#13775),.PCURVE_S1.);+#13764 = LINE('',#13765,#13766);+#13765 = CARTESIAN_POINT('',(2.84,-4.43,-8.142959240193E-02));+#13766 = VECTOR('',#13767,1.);+#13767 = DIRECTION('',(0.,0.,-1.));+#13768 = PCURVE('',#13467,#13769);+#13769 = DEFINITIONAL_REPRESENTATION('',(#13770),#13774);+#13770 = LINE('',#13771,#13772);+#13771 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#13772 = VECTOR('',#13773,1.);+#13773 = DIRECTION('',(-1.,0.));+#13774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13775 = PCURVE('',#13776,#13781);+#13776 = PLANE('',#13777);+#13777 = AXIS2_PLACEMENT_3D('',#13778,#13779,#13780);+#13778 = CARTESIAN_POINT('',(2.16,-4.43,-0.5));+#13779 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13780 = DIRECTION('',(0.,0.,1.));+#13781 = DEFINITIONAL_REPRESENTATION('',(#13782),#13786);+#13782 = LINE('',#13783,#13784);+#13783 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#13784 = VECTOR('',#13785,1.);+#13785 = DIRECTION('',(-1.,-0.));+#13786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13787 = ORIENTED_EDGE('',*,*,#13788,.F.);+#13788 = EDGE_CURVE('',#13789,#13761,#13791,.T.);+#13789 = VERTEX_POINT('',#13790);+#13790 = CARTESIAN_POINT('',(2.84,-3.99529407561,0.));+#13791 = SURFACE_CURVE('',#13792,(#13796,#13803),.PCURVE_S1.);+#13792 = LINE('',#13793,#13794);+#13793 = CARTESIAN_POINT('',(2.84,-3.938375,0.));+#13794 = VECTOR('',#13795,1.);+#13795 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13796 = PCURVE('',#13467,#13797);+#13797 = DEFINITIONAL_REPRESENTATION('',(#13798),#13802);+#13798 = LINE('',#13799,#13800);+#13799 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#13800 = VECTOR('',#13801,1.);+#13801 = DIRECTION('',(0.,1.));+#13802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13803 = PCURVE('',#13804,#13809);+#13804 = PLANE('',#13805);+#13805 = AXIS2_PLACEMENT_3D('',#13806,#13807,#13808);+#13806 = CARTESIAN_POINT('',(2.75,-3.99529407561,0.));+#13807 = DIRECTION('',(0.,0.,1.));+#13808 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13809 = DEFINITIONAL_REPRESENTATION('',(#13810),#13814);+#13810 = LINE('',#13811,#13812);+#13811 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#13812 = VECTOR('',#13813,1.);+#13813 = DIRECTION('',(1.,0.));+#13814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13815 = ORIENTED_EDGE('',*,*,#13816,.T.);+#13816 = EDGE_CURVE('',#13789,#13817,#13819,.T.);+#13817 = VERTEX_POINT('',#13818);+#13818 = CARTESIAN_POINT('',(2.84,-3.865353350249,7.826567165848E-02));+#13819 = SURFACE_CURVE('',#13820,(#13825,#13832),.PCURVE_S1.);+#13820 = CIRCLE('',#13821,0.147);+#13821 = AXIS2_PLACEMENT_3D('',#13822,#13823,#13824);+#13822 = CARTESIAN_POINT('',(2.84,-3.99529407561,0.147));+#13823 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#13824 = DIRECTION('',(0.,0.,1.));+#13825 = PCURVE('',#13467,#13826);+#13826 = DEFINITIONAL_REPRESENTATION('',(#13827),#13831);+#13827 = CIRCLE('',#13828,0.147);+#13828 = AXIS2_PLACEMENT_2D('',#13829,#13830);+#13829 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#13830 = DIRECTION('',(1.,0.));+#13831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13832 = PCURVE('',#13833,#13838);+#13833 = CYLINDRICAL_SURFACE('',#13834,0.147);+#13834 = AXIS2_PLACEMENT_3D('',#13835,#13836,#13837);+#13835 = CARTESIAN_POINT('',(2.75,-3.99529407561,0.147));+#13836 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13837 = DIRECTION('',(0.,0.,1.));+#13838 = DEFINITIONAL_REPRESENTATION('',(#13839),#13843);+#13839 = LINE('',#13840,#13841);+#13840 = CARTESIAN_POINT('',(-0.,9.E-02));+#13841 = VECTOR('',#13842,1.);+#13842 = DIRECTION('',(1.,-0.));+#13843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13844 = ORIENTED_EDGE('',*,*,#13845,.F.);+#13845 = EDGE_CURVE('',#13846,#13817,#13848,.T.);+#13846 = VERTEX_POINT('',#13847);+#13847 = CARTESIAN_POINT('',(2.84,-3.560206845921,0.655138379526));+#13848 = SURFACE_CURVE('',#13849,(#13853,#13860),.PCURVE_S1.);+#13849 = LINE('',#13850,#13851);+#13850 = CARTESIAN_POINT('',(2.84,-3.533592598085,0.705452025592));+#13851 = VECTOR('',#13852,1.);+#13852 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#13853 = PCURVE('',#13467,#13854);+#13854 = DEFINITIONAL_REPRESENTATION('',(#13855),#13859);+#13855 = LINE('',#13856,#13857);+#13856 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#13857 = VECTOR('',#13858,1.);+#13858 = DIRECTION('',(-0.883950512662,0.467580464908));+#13859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13860 = PCURVE('',#13861,#13866);+#13861 = PLANE('',#13862);+#13862 = AXIS2_PLACEMENT_3D('',#13863,#13864,#13865);+#13863 = CARTESIAN_POINT('',(2.75,-3.560206845921,0.655138379526));+#13864 = DIRECTION('',(9.813822117875E-17,-0.883950512662,0.467580464908+ ));+#13865 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#13866 = DEFINITIONAL_REPRESENTATION('',(#13867),#13871);+#13867 = LINE('',#13868,#13869);+#13868 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#13869 = VECTOR('',#13870,1.);+#13870 = DIRECTION('',(1.,-2.399596746007E-32));+#13871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13872 = ORIENTED_EDGE('',*,*,#13873,.F.);+#13873 = EDGE_CURVE('',#13874,#13846,#13876,.T.);+#13874 = VERTEX_POINT('',#13875);+#13875 = CARTESIAN_POINT('',(2.84,-3.52308092439,0.6775));+#13876 = SURFACE_CURVE('',#13877,(#13882,#13889),.PCURVE_S1.);+#13877 = CIRCLE('',#13878,4.2E-02);+#13878 = AXIS2_PLACEMENT_3D('',#13879,#13880,#13881);+#13879 = CARTESIAN_POINT('',(2.84,-3.52308092439,0.6355));+#13880 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#13881 = DIRECTION('',(0.,0.,1.));+#13882 = PCURVE('',#13467,#13883);+#13883 = DEFINITIONAL_REPRESENTATION('',(#13884),#13888);+#13884 = CIRCLE('',#13885,4.2E-02);+#13885 = AXIS2_PLACEMENT_2D('',#13886,#13887);+#13886 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#13887 = DIRECTION('',(1.,0.));+#13888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13889 = PCURVE('',#13890,#13895);+#13890 = CYLINDRICAL_SURFACE('',#13891,4.2E-02);+#13891 = AXIS2_PLACEMENT_3D('',#13892,#13893,#13894);+#13892 = CARTESIAN_POINT('',(2.75,-3.52308092439,0.6355));+#13893 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13894 = DIRECTION('',(0.,0.,1.));+#13895 = DEFINITIONAL_REPRESENTATION('',(#13896),#13900);+#13896 = LINE('',#13897,#13898);+#13897 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#13898 = VECTOR('',#13899,1.);+#13899 = DIRECTION('',(1.,-0.));+#13900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13901 = ORIENTED_EDGE('',*,*,#13902,.F.);+#13902 = EDGE_CURVE('',#13903,#13874,#13905,.T.);+#13903 = VERTEX_POINT('',#13904);+#13904 = CARTESIAN_POINT('',(2.84,-3.25,0.6775));+#13905 = SURFACE_CURVE('',#13906,(#13910,#13917),.PCURVE_S1.);+#13906 = LINE('',#13907,#13908);+#13907 = CARTESIAN_POINT('',(2.84,-3.25,0.6775));+#13908 = VECTOR('',#13909,1.);+#13909 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13910 = PCURVE('',#13467,#13911);+#13911 = DEFINITIONAL_REPRESENTATION('',(#13912),#13916);+#13912 = LINE('',#13913,#13914);+#13913 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#13914 = VECTOR('',#13915,1.);+#13915 = DIRECTION('',(0.,1.));+#13916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13917 = PCURVE('',#13918,#13923);+#13918 = PLANE('',#13919);+#13919 = AXIS2_PLACEMENT_3D('',#13920,#13921,#13922);+#13920 = CARTESIAN_POINT('',(2.75,-3.25,0.6775));+#13921 = DIRECTION('',(0.,0.,1.));+#13922 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13923 = DEFINITIONAL_REPRESENTATION('',(#13924),#13928);+#13924 = LINE('',#13925,#13926);+#13925 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#13926 = VECTOR('',#13927,1.);+#13927 = DIRECTION('',(1.,0.));+#13928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13929 = ORIENTED_EDGE('',*,*,#13930,.F.);+#13930 = EDGE_CURVE('',#13931,#13903,#13933,.T.);+#13931 = VERTEX_POINT('',#13932);+#13932 = CARTESIAN_POINT('',(2.84,-3.2,0.713992189406));+#13933 = SURFACE_CURVE('',#13934,(#13939,#13950),.PCURVE_S1.);+#13934 = CIRCLE('',#13935,5.25E-02);+#13935 = AXIS2_PLACEMENT_3D('',#13936,#13937,#13938);+#13936 = CARTESIAN_POINT('',(2.84,-3.25,0.73));+#13937 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#13938 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13939 = PCURVE('',#13467,#13940);+#13940 = DEFINITIONAL_REPRESENTATION('',(#13941),#13949);+#13941 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13942,#13943,#13944,#13945+ ,#13946,#13947,#13948),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#13942 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#13943 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#13944 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#13945 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#13946 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#13947 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#13948 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#13949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13950 = PCURVE('',#13951,#13956);+#13951 = CYLINDRICAL_SURFACE('',#13952,5.25E-02);+#13952 = AXIS2_PLACEMENT_3D('',#13953,#13954,#13955);+#13953 = CARTESIAN_POINT('',(2.75,-3.25,0.73));+#13954 = DIRECTION('',(1.,1.110223024625E-16,0.));+#13955 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#13956 = DEFINITIONAL_REPRESENTATION('',(#13957),#13961);+#13957 = LINE('',#13958,#13959);+#13958 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#13959 = VECTOR('',#13960,1.);+#13960 = DIRECTION('',(-1.,-0.));+#13961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13962 = ORIENTED_EDGE('',*,*,#13963,.F.);+#13963 = EDGE_CURVE('',#13446,#13931,#13964,.T.);+#13964 = SURFACE_CURVE('',#13965,(#13969,#13976),.PCURVE_S1.);+#13965 = LINE('',#13966,#13967);+#13966 = CARTESIAN_POINT('',(2.84,-3.2,-8.142959240193E-02));+#13967 = VECTOR('',#13968,1.);+#13968 = DIRECTION('',(0.,0.,-1.));+#13969 = PCURVE('',#13467,#13970);+#13970 = DEFINITIONAL_REPRESENTATION('',(#13971),#13975);+#13971 = LINE('',#13972,#13973);+#13972 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#13973 = VECTOR('',#13974,1.);+#13974 = DIRECTION('',(-1.,0.));+#13975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13976 = PCURVE('',#13499,#13977);+#13977 = DEFINITIONAL_REPRESENTATION('',(#13978),#13982);+#13978 = LINE('',#13979,#13980);+#13979 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#13980 = VECTOR('',#13981,1.);+#13981 = DIRECTION('',(-1.,-0.));+#13982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13983 = ADVANCED_FACE('',(#13984),#13499,.F.);+#13984 = FACE_BOUND('',#13985,.F.);+#13985 = EDGE_LOOP('',(#13986,#13987,#14010,#14031));+#13986 = ORIENTED_EDGE('',*,*,#13483,.F.);+#13987 = ORIENTED_EDGE('',*,*,#13988,.T.);+#13988 = EDGE_CURVE('',#13484,#13989,#13991,.T.);+#13989 = VERTEX_POINT('',#13990);+#13990 = CARTESIAN_POINT('',(2.66,-3.2,0.713992189406));+#13991 = SURFACE_CURVE('',#13992,(#13996,#14003),.PCURVE_S1.);+#13992 = LINE('',#13993,#13994);+#13993 = CARTESIAN_POINT('',(2.66,-3.2,-8.142959240193E-02));+#13994 = VECTOR('',#13995,1.);+#13995 = DIRECTION('',(0.,0.,-1.));+#13996 = PCURVE('',#13499,#13997);+#13997 = DEFINITIONAL_REPRESENTATION('',(#13998),#14002);+#13998 = LINE('',#13999,#14000);+#13999 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#14000 = VECTOR('',#14001,1.);+#14001 = DIRECTION('',(-1.,-0.));+#14002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14003 = PCURVE('',#13528,#14004);+#14004 = DEFINITIONAL_REPRESENTATION('',(#14005),#14009);+#14005 = LINE('',#14006,#14007);+#14006 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#14007 = VECTOR('',#14008,1.);+#14008 = DIRECTION('',(-1.,0.));+#14009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14010 = ORIENTED_EDGE('',*,*,#14011,.T.);+#14011 = EDGE_CURVE('',#13989,#13931,#14012,.T.);+#14012 = SURFACE_CURVE('',#14013,(#14017,#14024),.PCURVE_S1.);+#14013 = LINE('',#14014,#14015);+#14014 = CARTESIAN_POINT('',(2.75,-3.2,0.713992189406));+#14015 = VECTOR('',#14016,1.);+#14016 = DIRECTION('',(1.,1.110223024625E-16,0.));+#14017 = PCURVE('',#13499,#14018);+#14018 = DEFINITIONAL_REPRESENTATION('',(#14019),#14023);+#14019 = LINE('',#14020,#14021);+#14020 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#14021 = VECTOR('',#14022,1.);+#14022 = DIRECTION('',(0.,-1.));+#14023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14024 = PCURVE('',#13951,#14025);+#14025 = DEFINITIONAL_REPRESENTATION('',(#14026),#14030);+#14026 = LINE('',#14027,#14028);+#14027 = CARTESIAN_POINT('',(2.831748013849,0.));+#14028 = VECTOR('',#14029,1.);+#14029 = DIRECTION('',(-0.,1.));+#14030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14031 = ORIENTED_EDGE('',*,*,#13963,.F.);+#14032 = ADVANCED_FACE('',(#14033),#13528,.F.);+#14033 = FACE_BOUND('',#14034,.F.);+#14034 = EDGE_LOOP('',(#14035,#14036,#14037,#14061,#14084,#14108,#14131,+ #14154,#14177,#14201,#14224,#14248,#14271,#14297));+#14035 = ORIENTED_EDGE('',*,*,#13511,.F.);+#14036 = ORIENTED_EDGE('',*,*,#13574,.T.);+#14037 = ORIENTED_EDGE('',*,*,#14038,.T.);+#14038 = EDGE_CURVE('',#13575,#14039,#14041,.T.);+#14039 = VERTEX_POINT('',#14040);+#14040 = CARTESIAN_POINT('',(2.66,-3.653021649751,0.704234328342));+#14041 = SURFACE_CURVE('',#14042,(#14047,#14054),.PCURVE_S1.);+#14042 = CIRCLE('',#14043,0.147);+#14043 = AXIS2_PLACEMENT_3D('',#14044,#14045,#14046);+#14044 = CARTESIAN_POINT('',(2.66,-3.52308092439,0.6355));+#14045 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#14046 = DIRECTION('',(0.,0.,1.));+#14047 = PCURVE('',#13528,#14048);+#14048 = DEFINITIONAL_REPRESENTATION('',(#14049),#14053);+#14049 = CIRCLE('',#14050,0.147);+#14050 = AXIS2_PLACEMENT_2D('',#14051,#14052);+#14051 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#14052 = DIRECTION('',(1.,0.));+#14053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14054 = PCURVE('',#13613,#14055);+#14055 = DEFINITIONAL_REPRESENTATION('',(#14056),#14060);+#14056 = LINE('',#14057,#14058);+#14057 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#14058 = VECTOR('',#14059,1.);+#14059 = DIRECTION('',(1.,0.));+#14060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14061 = ORIENTED_EDGE('',*,*,#14062,.T.);+#14062 = EDGE_CURVE('',#14039,#14063,#14065,.T.);+#14063 = VERTEX_POINT('',#14064);+#14064 = CARTESIAN_POINT('',(2.66,-3.958168154079,0.127361620474));+#14065 = SURFACE_CURVE('',#14066,(#14070,#14077),.PCURVE_S1.);+#14066 = LINE('',#14067,#14068);+#14067 = CARTESIAN_POINT('',(2.66,-3.626407401915,0.754547974408));+#14068 = VECTOR('',#14069,1.);+#14069 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#14070 = PCURVE('',#13528,#14071);+#14071 = DEFINITIONAL_REPRESENTATION('',(#14072),#14076);+#14072 = LINE('',#14073,#14074);+#14073 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#14074 = VECTOR('',#14075,1.);+#14075 = DIRECTION('',(-0.883950512662,0.467580464908));+#14076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14077 = PCURVE('',#13691,#14078);+#14078 = DEFINITIONAL_REPRESENTATION('',(#14079),#14083);+#14079 = LINE('',#14080,#14081);+#14080 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#14081 = VECTOR('',#14082,1.);+#14082 = DIRECTION('',(1.,-2.399596746007E-32));+#14083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14084 = ORIENTED_EDGE('',*,*,#14085,.F.);+#14085 = EDGE_CURVE('',#14086,#14063,#14088,.T.);+#14086 = VERTEX_POINT('',#14087);+#14087 = CARTESIAN_POINT('',(2.66,-3.99529407561,0.105));+#14088 = SURFACE_CURVE('',#14089,(#14094,#14101),.PCURVE_S1.);+#14089 = CIRCLE('',#14090,4.2E-02);+#14090 = AXIS2_PLACEMENT_3D('',#14091,#14092,#14093);+#14091 = CARTESIAN_POINT('',(2.66,-3.99529407561,0.147));+#14092 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#14093 = DIRECTION('',(0.,0.,1.));+#14094 = PCURVE('',#13528,#14095);+#14095 = DEFINITIONAL_REPRESENTATION('',(#14096),#14100);+#14096 = CIRCLE('',#14097,4.2E-02);+#14097 = AXIS2_PLACEMENT_2D('',#14098,#14099);+#14098 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#14099 = DIRECTION('',(1.,0.));+#14100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14101 = PCURVE('',#13720,#14102);+#14102 = DEFINITIONAL_REPRESENTATION('',(#14103),#14107);+#14103 = LINE('',#14104,#14105);+#14104 = CARTESIAN_POINT('',(0.,-9.E-02));+#14105 = VECTOR('',#14106,1.);+#14106 = DIRECTION('',(1.,0.));+#14107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14108 = ORIENTED_EDGE('',*,*,#14109,.T.);+#14109 = EDGE_CURVE('',#14086,#14110,#14112,.T.);+#14110 = VERTEX_POINT('',#14111);+#14111 = CARTESIAN_POINT('',(2.66,-4.43,0.105));+#14112 = SURFACE_CURVE('',#14113,(#14117,#14124),.PCURVE_S1.);+#14113 = LINE('',#14114,#14115);+#14114 = CARTESIAN_POINT('',(2.66,-3.938375,0.105));+#14115 = VECTOR('',#14116,1.);+#14116 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14117 = PCURVE('',#13528,#14118);+#14118 = DEFINITIONAL_REPRESENTATION('',(#14119),#14123);+#14119 = LINE('',#14120,#14121);+#14120 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#14121 = VECTOR('',#14122,1.);+#14122 = DIRECTION('',(0.,1.));+#14123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14124 = PCURVE('',#13748,#14125);+#14125 = DEFINITIONAL_REPRESENTATION('',(#14126),#14130);+#14126 = LINE('',#14127,#14128);+#14127 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#14128 = VECTOR('',#14129,1.);+#14129 = DIRECTION('',(1.,0.));+#14130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14131 = ORIENTED_EDGE('',*,*,#14132,.T.);+#14132 = EDGE_CURVE('',#14110,#14133,#14135,.T.);+#14133 = VERTEX_POINT('',#14134);+#14134 = CARTESIAN_POINT('',(2.66,-4.43,0.));+#14135 = SURFACE_CURVE('',#14136,(#14140,#14147),.PCURVE_S1.);+#14136 = LINE('',#14137,#14138);+#14137 = CARTESIAN_POINT('',(2.66,-4.43,-8.142959240193E-02));+#14138 = VECTOR('',#14139,1.);+#14139 = DIRECTION('',(0.,0.,-1.));+#14140 = PCURVE('',#13528,#14141);+#14141 = DEFINITIONAL_REPRESENTATION('',(#14142),#14146);+#14142 = LINE('',#14143,#14144);+#14143 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#14144 = VECTOR('',#14145,1.);+#14145 = DIRECTION('',(-1.,0.));+#14146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14147 = PCURVE('',#13776,#14148);+#14148 = DEFINITIONAL_REPRESENTATION('',(#14149),#14153);+#14149 = LINE('',#14150,#14151);+#14150 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#14151 = VECTOR('',#14152,1.);+#14152 = DIRECTION('',(-1.,-0.));+#14153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14154 = ORIENTED_EDGE('',*,*,#14155,.F.);+#14155 = EDGE_CURVE('',#14156,#14133,#14158,.T.);+#14156 = VERTEX_POINT('',#14157);+#14157 = CARTESIAN_POINT('',(2.66,-3.99529407561,0.));+#14158 = SURFACE_CURVE('',#14159,(#14163,#14170),.PCURVE_S1.);+#14159 = LINE('',#14160,#14161);+#14160 = CARTESIAN_POINT('',(2.66,-3.938375,0.));+#14161 = VECTOR('',#14162,1.);+#14162 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14163 = PCURVE('',#13528,#14164);+#14164 = DEFINITIONAL_REPRESENTATION('',(#14165),#14169);+#14165 = LINE('',#14166,#14167);+#14166 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#14167 = VECTOR('',#14168,1.);+#14168 = DIRECTION('',(0.,1.));+#14169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14170 = PCURVE('',#13804,#14171);+#14171 = DEFINITIONAL_REPRESENTATION('',(#14172),#14176);+#14172 = LINE('',#14173,#14174);+#14173 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#14174 = VECTOR('',#14175,1.);+#14175 = DIRECTION('',(1.,0.));+#14176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14177 = ORIENTED_EDGE('',*,*,#14178,.T.);+#14178 = EDGE_CURVE('',#14156,#14179,#14181,.T.);+#14179 = VERTEX_POINT('',#14180);+#14180 = CARTESIAN_POINT('',(2.66,-3.865353350249,7.826567165848E-02));+#14181 = SURFACE_CURVE('',#14182,(#14187,#14194),.PCURVE_S1.);+#14182 = CIRCLE('',#14183,0.147);+#14183 = AXIS2_PLACEMENT_3D('',#14184,#14185,#14186);+#14184 = CARTESIAN_POINT('',(2.66,-3.99529407561,0.147));+#14185 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#14186 = DIRECTION('',(0.,0.,1.));+#14187 = PCURVE('',#13528,#14188);+#14188 = DEFINITIONAL_REPRESENTATION('',(#14189),#14193);+#14189 = CIRCLE('',#14190,0.147);+#14190 = AXIS2_PLACEMENT_2D('',#14191,#14192);+#14191 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#14192 = DIRECTION('',(1.,0.));+#14193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14194 = PCURVE('',#13833,#14195);+#14195 = DEFINITIONAL_REPRESENTATION('',(#14196),#14200);+#14196 = LINE('',#14197,#14198);+#14197 = CARTESIAN_POINT('',(0.,-9.E-02));+#14198 = VECTOR('',#14199,1.);+#14199 = DIRECTION('',(1.,0.));+#14200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14201 = ORIENTED_EDGE('',*,*,#14202,.F.);+#14202 = EDGE_CURVE('',#14203,#14179,#14205,.T.);+#14203 = VERTEX_POINT('',#14204);+#14204 = CARTESIAN_POINT('',(2.66,-3.560206845921,0.655138379526));+#14205 = SURFACE_CURVE('',#14206,(#14210,#14217),.PCURVE_S1.);+#14206 = LINE('',#14207,#14208);+#14207 = CARTESIAN_POINT('',(2.66,-3.533592598085,0.705452025592));+#14208 = VECTOR('',#14209,1.);+#14209 = DIRECTION('',(5.191185980065E-17,-0.467580464908,+ -0.883950512662));+#14210 = PCURVE('',#13528,#14211);+#14211 = DEFINITIONAL_REPRESENTATION('',(#14212),#14216);+#14212 = LINE('',#14213,#14214);+#14213 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#14214 = VECTOR('',#14215,1.);+#14215 = DIRECTION('',(-0.883950512662,0.467580464908));+#14216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14217 = PCURVE('',#13861,#14218);+#14218 = DEFINITIONAL_REPRESENTATION('',(#14219),#14223);+#14219 = LINE('',#14220,#14221);+#14220 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#14221 = VECTOR('',#14222,1.);+#14222 = DIRECTION('',(1.,-2.399596746007E-32));+#14223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14224 = ORIENTED_EDGE('',*,*,#14225,.F.);+#14225 = EDGE_CURVE('',#14226,#14203,#14228,.T.);+#14226 = VERTEX_POINT('',#14227);+#14227 = CARTESIAN_POINT('',(2.66,-3.52308092439,0.6775));+#14228 = SURFACE_CURVE('',#14229,(#14234,#14241),.PCURVE_S1.);+#14229 = CIRCLE('',#14230,4.2E-02);+#14230 = AXIS2_PLACEMENT_3D('',#14231,#14232,#14233);+#14231 = CARTESIAN_POINT('',(2.66,-3.52308092439,0.6355));+#14232 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#14233 = DIRECTION('',(0.,0.,1.));+#14234 = PCURVE('',#13528,#14235);+#14235 = DEFINITIONAL_REPRESENTATION('',(#14236),#14240);+#14236 = CIRCLE('',#14237,4.2E-02);+#14237 = AXIS2_PLACEMENT_2D('',#14238,#14239);+#14238 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#14239 = DIRECTION('',(1.,0.));+#14240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14241 = PCURVE('',#13890,#14242);+#14242 = DEFINITIONAL_REPRESENTATION('',(#14243),#14247);+#14243 = LINE('',#14244,#14245);+#14244 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#14245 = VECTOR('',#14246,1.);+#14246 = DIRECTION('',(1.,0.));+#14247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14248 = ORIENTED_EDGE('',*,*,#14249,.F.);+#14249 = EDGE_CURVE('',#14250,#14226,#14252,.T.);+#14250 = VERTEX_POINT('',#14251);+#14251 = CARTESIAN_POINT('',(2.66,-3.25,0.6775));+#14252 = SURFACE_CURVE('',#14253,(#14257,#14264),.PCURVE_S1.);+#14253 = LINE('',#14254,#14255);+#14254 = CARTESIAN_POINT('',(2.66,-3.25,0.6775));+#14255 = VECTOR('',#14256,1.);+#14256 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14257 = PCURVE('',#13528,#14258);+#14258 = DEFINITIONAL_REPRESENTATION('',(#14259),#14263);+#14259 = LINE('',#14260,#14261);+#14260 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#14261 = VECTOR('',#14262,1.);+#14262 = DIRECTION('',(0.,1.));+#14263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14264 = PCURVE('',#13918,#14265);+#14265 = DEFINITIONAL_REPRESENTATION('',(#14266),#14270);+#14266 = LINE('',#14267,#14268);+#14267 = CARTESIAN_POINT('',(-9.992007221625E-18,-9.E-02));+#14268 = VECTOR('',#14269,1.);+#14269 = DIRECTION('',(1.,0.));+#14270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14271 = ORIENTED_EDGE('',*,*,#14272,.F.);+#14272 = EDGE_CURVE('',#13989,#14250,#14273,.T.);+#14273 = SURFACE_CURVE('',#14274,(#14279,#14290),.PCURVE_S1.);+#14274 = CIRCLE('',#14275,5.25E-02);+#14275 = AXIS2_PLACEMENT_3D('',#14276,#14277,#14278);+#14276 = CARTESIAN_POINT('',(2.66,-3.25,0.73));+#14277 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14278 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#14279 = PCURVE('',#13528,#14280);+#14280 = DEFINITIONAL_REPRESENTATION('',(#14281),#14289);+#14281 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14282,#14283,#14284,#14285+ ,#14286,#14287,#14288),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14282 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#14283 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#14284 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#14285 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#14286 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#14287 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#14288 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#14289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14290 = PCURVE('',#13951,#14291);+#14291 = DEFINITIONAL_REPRESENTATION('',(#14292),#14296);+#14292 = LINE('',#14293,#14294);+#14293 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#14294 = VECTOR('',#14295,1.);+#14295 = DIRECTION('',(-1.,0.));+#14296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14297 = ORIENTED_EDGE('',*,*,#13988,.F.);+#14298 = ADVANCED_FACE('',(#14299),#13613,.T.);+#14299 = FACE_BOUND('',#14300,.T.);+#14300 = EDGE_LOOP('',(#14301,#14302,#14303,#14324));+#14301 = ORIENTED_EDGE('',*,*,#13597,.F.);+#14302 = ORIENTED_EDGE('',*,*,#14038,.T.);+#14303 = ORIENTED_EDGE('',*,*,#14304,.T.);+#14304 = EDGE_CURVE('',#14039,#13652,#14305,.T.);+#14305 = SURFACE_CURVE('',#14306,(#14310,#14317),.PCURVE_S1.);+#14306 = LINE('',#14307,#14308);+#14307 = CARTESIAN_POINT('',(2.66,-3.653021649751,0.704234328342));+#14308 = VECTOR('',#14309,1.);+#14309 = DIRECTION('',(1.,1.110223024625E-16,0.));+#14310 = PCURVE('',#13613,#14311);+#14311 = DEFINITIONAL_REPRESENTATION('',(#14312),#14316);+#14312 = LINE('',#14313,#14314);+#14313 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#14314 = VECTOR('',#14315,1.);+#14315 = DIRECTION('',(-0.,1.));+#14316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14317 = PCURVE('',#13691,#14318);+#14318 = DEFINITIONAL_REPRESENTATION('',(#14319),#14323);+#14319 = LINE('',#14320,#14321);+#14320 = CARTESIAN_POINT('',(-4.672067382058E-18,-9.E-02));+#14321 = VECTOR('',#14322,1.);+#14322 = DIRECTION('',(4.767113258106E-29,1.));+#14323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14324 = ORIENTED_EDGE('',*,*,#13651,.F.);+#14325 = ADVANCED_FACE('',(#14326),#13951,.T.);+#14326 = FACE_BOUND('',#14327,.T.);+#14327 = EDGE_LOOP('',(#14328,#14329,#14350,#14351));+#14328 = ORIENTED_EDGE('',*,*,#13930,.T.);+#14329 = ORIENTED_EDGE('',*,*,#14330,.T.);+#14330 = EDGE_CURVE('',#13903,#14250,#14331,.T.);+#14331 = SURFACE_CURVE('',#14332,(#14336,#14343),.PCURVE_S1.);+#14332 = LINE('',#14333,#14334);+#14333 = CARTESIAN_POINT('',(2.84,-3.25,0.6775));+#14334 = VECTOR('',#14335,1.);+#14335 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14336 = PCURVE('',#13951,#14337);+#14337 = DEFINITIONAL_REPRESENTATION('',(#14338),#14342);+#14338 = LINE('',#14339,#14340);+#14339 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#14340 = VECTOR('',#14341,1.);+#14341 = DIRECTION('',(-0.,-1.));+#14342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14343 = PCURVE('',#13918,#14344);+#14344 = DEFINITIONAL_REPRESENTATION('',(#14345),#14349);+#14345 = LINE('',#14346,#14347);+#14346 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#14347 = VECTOR('',#14348,1.);+#14348 = DIRECTION('',(0.,-1.));+#14349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14350 = ORIENTED_EDGE('',*,*,#14272,.F.);+#14351 = ORIENTED_EDGE('',*,*,#14011,.T.);+#14352 = ADVANCED_FACE('',(#14353),#13918,.F.);+#14353 = FACE_BOUND('',#14354,.F.);+#14354 = EDGE_LOOP('',(#14355,#14356,#14377,#14378));+#14355 = ORIENTED_EDGE('',*,*,#14249,.T.);+#14356 = ORIENTED_EDGE('',*,*,#14357,.F.);+#14357 = EDGE_CURVE('',#13874,#14226,#14358,.T.);+#14358 = SURFACE_CURVE('',#14359,(#14363,#14370),.PCURVE_S1.);+#14359 = LINE('',#14360,#14361);+#14360 = CARTESIAN_POINT('',(2.84,-3.52308092439,0.6775));+#14361 = VECTOR('',#14362,1.);+#14362 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14363 = PCURVE('',#13918,#14364);+#14364 = DEFINITIONAL_REPRESENTATION('',(#14365),#14369);+#14365 = LINE('',#14366,#14367);+#14366 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#14367 = VECTOR('',#14368,1.);+#14368 = DIRECTION('',(0.,-1.));+#14369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14370 = PCURVE('',#13890,#14371);+#14371 = DEFINITIONAL_REPRESENTATION('',(#14372),#14376);+#14372 = LINE('',#14373,#14374);+#14373 = CARTESIAN_POINT('',(0.,9.E-02));+#14374 = VECTOR('',#14375,1.);+#14375 = DIRECTION('',(0.,-1.));+#14376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14377 = ORIENTED_EDGE('',*,*,#13902,.F.);+#14378 = ORIENTED_EDGE('',*,*,#14330,.T.);+#14379 = ADVANCED_FACE('',(#14380),#13890,.F.);+#14380 = FACE_BOUND('',#14381,.F.);+#14381 = EDGE_LOOP('',(#14382,#14383,#14404,#14405));+#14382 = ORIENTED_EDGE('',*,*,#14225,.T.);+#14383 = ORIENTED_EDGE('',*,*,#14384,.F.);+#14384 = EDGE_CURVE('',#13846,#14203,#14385,.T.);+#14385 = SURFACE_CURVE('',#14386,(#14390,#14397),.PCURVE_S1.);+#14386 = LINE('',#14387,#14388);+#14387 = CARTESIAN_POINT('',(2.84,-3.560206845921,0.655138379526));+#14388 = VECTOR('',#14389,1.);+#14389 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14390 = PCURVE('',#13890,#14391);+#14391 = DEFINITIONAL_REPRESENTATION('',(#14392),#14396);+#14392 = LINE('',#14393,#14394);+#14393 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#14394 = VECTOR('',#14395,1.);+#14395 = DIRECTION('',(0.,-1.));+#14396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14397 = PCURVE('',#13861,#14398);+#14398 = DEFINITIONAL_REPRESENTATION('',(#14399),#14403);+#14399 = LINE('',#14400,#14401);+#14400 = CARTESIAN_POINT('',(4.672067382058E-18,9.E-02));+#14401 = VECTOR('',#14402,1.);+#14402 = DIRECTION('',(-4.767113258106E-29,-1.));+#14403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14404 = ORIENTED_EDGE('',*,*,#13873,.F.);+#14405 = ORIENTED_EDGE('',*,*,#14357,.T.);+#14406 = ADVANCED_FACE('',(#14407),#13861,.F.);+#14407 = FACE_BOUND('',#14408,.F.);+#14408 = EDGE_LOOP('',(#14409,#14410,#14431,#14432));+#14409 = ORIENTED_EDGE('',*,*,#14202,.T.);+#14410 = ORIENTED_EDGE('',*,*,#14411,.F.);+#14411 = EDGE_CURVE('',#13817,#14179,#14412,.T.);+#14412 = SURFACE_CURVE('',#14413,(#14417,#14424),.PCURVE_S1.);+#14413 = LINE('',#14414,#14415);+#14414 = CARTESIAN_POINT('',(2.84,-3.865353350249,7.826567165848E-02));+#14415 = VECTOR('',#14416,1.);+#14416 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14417 = PCURVE('',#13861,#14418);+#14418 = DEFINITIONAL_REPRESENTATION('',(#14419),#14423);+#14419 = LINE('',#14420,#14421);+#14420 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#14421 = VECTOR('',#14422,1.);+#14422 = DIRECTION('',(-4.767113258106E-29,-1.));+#14423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14424 = PCURVE('',#13833,#14425);+#14425 = DEFINITIONAL_REPRESENTATION('',(#14426),#14430);+#14426 = LINE('',#14427,#14428);+#14427 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#14428 = VECTOR('',#14429,1.);+#14429 = DIRECTION('',(0.,-1.));+#14430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14431 = ORIENTED_EDGE('',*,*,#13845,.F.);+#14432 = ORIENTED_EDGE('',*,*,#14384,.T.);+#14433 = ADVANCED_FACE('',(#14434),#13833,.T.);+#14434 = FACE_BOUND('',#14435,.T.);+#14435 = EDGE_LOOP('',(#14436,#14437,#14438,#14439));+#14436 = ORIENTED_EDGE('',*,*,#14178,.T.);+#14437 = ORIENTED_EDGE('',*,*,#14411,.F.);+#14438 = ORIENTED_EDGE('',*,*,#13816,.F.);+#14439 = ORIENTED_EDGE('',*,*,#14440,.T.);+#14440 = EDGE_CURVE('',#13789,#14156,#14441,.T.);+#14441 = SURFACE_CURVE('',#14442,(#14446,#14453),.PCURVE_S1.);+#14442 = LINE('',#14443,#14444);+#14443 = CARTESIAN_POINT('',(2.84,-3.99529407561,0.));+#14444 = VECTOR('',#14445,1.);+#14445 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14446 = PCURVE('',#13833,#14447);+#14447 = DEFINITIONAL_REPRESENTATION('',(#14448),#14452);+#14448 = LINE('',#14449,#14450);+#14449 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#14450 = VECTOR('',#14451,1.);+#14451 = DIRECTION('',(0.,-1.));+#14452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14453 = PCURVE('',#13804,#14454);+#14454 = DEFINITIONAL_REPRESENTATION('',(#14455),#14459);+#14455 = LINE('',#14456,#14457);+#14456 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#14457 = VECTOR('',#14458,1.);+#14458 = DIRECTION('',(0.,-1.));+#14459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14460 = ADVANCED_FACE('',(#14461),#13804,.F.);+#14461 = FACE_BOUND('',#14462,.F.);+#14462 = EDGE_LOOP('',(#14463,#14464,#14465,#14486));+#14463 = ORIENTED_EDGE('',*,*,#14440,.T.);+#14464 = ORIENTED_EDGE('',*,*,#14155,.T.);+#14465 = ORIENTED_EDGE('',*,*,#14466,.T.);+#14466 = EDGE_CURVE('',#14133,#13761,#14467,.T.);+#14467 = SURFACE_CURVE('',#14468,(#14472,#14479),.PCURVE_S1.);+#14468 = LINE('',#14469,#14470);+#14469 = CARTESIAN_POINT('',(2.455,-4.43,0.));+#14470 = VECTOR('',#14471,1.);+#14471 = DIRECTION('',(1.,1.110223024625E-16,0.));+#14472 = PCURVE('',#13804,#14473);+#14473 = DEFINITIONAL_REPRESENTATION('',(#14474),#14478);+#14474 = LINE('',#14475,#14476);+#14475 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#14476 = VECTOR('',#14477,1.);+#14477 = DIRECTION('',(0.,1.));+#14478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14479 = PCURVE('',#13776,#14480);+#14480 = DEFINITIONAL_REPRESENTATION('',(#14481),#14485);+#14481 = LINE('',#14482,#14483);+#14482 = CARTESIAN_POINT('',(0.5,-0.295));+#14483 = VECTOR('',#14484,1.);+#14484 = DIRECTION('',(0.,-1.));+#14485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14486 = ORIENTED_EDGE('',*,*,#13788,.F.);+#14487 = ADVANCED_FACE('',(#14488),#13776,.T.);+#14488 = FACE_BOUND('',#14489,.T.);+#14489 = EDGE_LOOP('',(#14490,#14491,#14512,#14513));+#14490 = ORIENTED_EDGE('',*,*,#13760,.F.);+#14491 = ORIENTED_EDGE('',*,*,#14492,.F.);+#14492 = EDGE_CURVE('',#14110,#13733,#14493,.T.);+#14493 = SURFACE_CURVE('',#14494,(#14498,#14505),.PCURVE_S1.);+#14494 = LINE('',#14495,#14496);+#14495 = CARTESIAN_POINT('',(2.455,-4.43,0.105));+#14496 = VECTOR('',#14497,1.);+#14497 = DIRECTION('',(1.,1.110223024625E-16,0.));+#14498 = PCURVE('',#13776,#14499);+#14499 = DEFINITIONAL_REPRESENTATION('',(#14500),#14504);+#14500 = LINE('',#14501,#14502);+#14501 = CARTESIAN_POINT('',(0.605,-0.295));+#14502 = VECTOR('',#14503,1.);+#14503 = DIRECTION('',(0.,-1.));+#14504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14505 = PCURVE('',#13748,#14506);+#14506 = DEFINITIONAL_REPRESENTATION('',(#14507),#14511);+#14507 = LINE('',#14508,#14509);+#14508 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#14509 = VECTOR('',#14510,1.);+#14510 = DIRECTION('',(0.,1.));+#14511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14512 = ORIENTED_EDGE('',*,*,#14132,.T.);+#14513 = ORIENTED_EDGE('',*,*,#14466,.T.);+#14514 = ADVANCED_FACE('',(#14515),#13748,.T.);+#14515 = FACE_BOUND('',#14516,.T.);+#14516 = EDGE_LOOP('',(#14517,#14538,#14539,#14540));+#14517 = ORIENTED_EDGE('',*,*,#14518,.T.);+#14518 = EDGE_CURVE('',#13704,#14086,#14519,.T.);+#14519 = SURFACE_CURVE('',#14520,(#14524,#14531),.PCURVE_S1.);+#14520 = LINE('',#14521,#14522);+#14521 = CARTESIAN_POINT('',(2.84,-3.99529407561,0.105));+#14522 = VECTOR('',#14523,1.);+#14523 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14524 = PCURVE('',#13748,#14525);+#14525 = DEFINITIONAL_REPRESENTATION('',(#14526),#14530);+#14526 = LINE('',#14527,#14528);+#14527 = CARTESIAN_POINT('',(9.992007221625E-18,9.E-02));+#14528 = VECTOR('',#14529,1.);+#14529 = DIRECTION('',(0.,-1.));+#14530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14531 = PCURVE('',#13720,#14532);+#14532 = DEFINITIONAL_REPRESENTATION('',(#14533),#14537);+#14533 = LINE('',#14534,#14535);+#14534 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#14535 = VECTOR('',#14536,1.);+#14536 = DIRECTION('',(0.,-1.));+#14537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14538 = ORIENTED_EDGE('',*,*,#14109,.T.);+#14539 = ORIENTED_EDGE('',*,*,#14492,.T.);+#14540 = ORIENTED_EDGE('',*,*,#13732,.F.);+#14541 = ADVANCED_FACE('',(#14542),#13720,.F.);+#14542 = FACE_BOUND('',#14543,.F.);+#14543 = EDGE_LOOP('',(#14544,#14545,#14566,#14567));+#14544 = ORIENTED_EDGE('',*,*,#14085,.T.);+#14545 = ORIENTED_EDGE('',*,*,#14546,.F.);+#14546 = EDGE_CURVE('',#13676,#14063,#14547,.T.);+#14547 = SURFACE_CURVE('',#14548,(#14552,#14559),.PCURVE_S1.);+#14548 = LINE('',#14549,#14550);+#14549 = CARTESIAN_POINT('',(2.84,-3.958168154079,0.127361620474));+#14550 = VECTOR('',#14551,1.);+#14551 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#14552 = PCURVE('',#13720,#14553);+#14553 = DEFINITIONAL_REPRESENTATION('',(#14554),#14558);+#14554 = LINE('',#14555,#14556);+#14555 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#14556 = VECTOR('',#14557,1.);+#14557 = DIRECTION('',(0.,-1.));+#14558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14559 = PCURVE('',#13691,#14560);+#14560 = DEFINITIONAL_REPRESENTATION('',(#14561),#14565);+#14561 = LINE('',#14562,#14563);+#14562 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#14563 = VECTOR('',#14564,1.);+#14564 = DIRECTION('',(-4.767113258106E-29,-1.));+#14565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14566 = ORIENTED_EDGE('',*,*,#13703,.F.);+#14567 = ORIENTED_EDGE('',*,*,#14518,.T.);+#14568 = ADVANCED_FACE('',(#14569),#13691,.T.);+#14569 = FACE_BOUND('',#14570,.T.);+#14570 = EDGE_LOOP('',(#14571,#14572,#14573,#14574));+#14571 = ORIENTED_EDGE('',*,*,#14304,.F.);+#14572 = ORIENTED_EDGE('',*,*,#14062,.T.);+#14573 = ORIENTED_EDGE('',*,*,#14546,.F.);+#14574 = ORIENTED_EDGE('',*,*,#13675,.F.);+#14575 = MANIFOLD_SOLID_BREP('',#14576);+#14576 = CLOSED_SHELL('',(#14577,#14707,#14783,#15121,#15170,#15436,+ #15463,#15490,#15517,#15544,#15571,#15598,#15625,#15652,#15679,+ #15706));+#14577 = ADVANCED_FACE('',(#14578),#14593,.T.);+#14578 = FACE_BOUND('',#14579,.T.);+#14579 = EDGE_LOOP('',(#14580,#14620,#14648,#14681));+#14580 = ORIENTED_EDGE('',*,*,#14581,.T.);+#14581 = EDGE_CURVE('',#14582,#14584,#14586,.T.);+#14582 = VERTEX_POINT('',#14583);+#14583 = CARTESIAN_POINT('',(3.25,-2.66,0.7825));+#14584 = VERTEX_POINT('',#14585);+#14585 = CARTESIAN_POINT('',(3.2,-2.66,0.746007810594));+#14586 = SURFACE_CURVE('',#14587,(#14592,#14604),.PCURVE_S1.);+#14587 = CIRCLE('',#14588,5.25E-02);+#14588 = AXIS2_PLACEMENT_3D('',#14589,#14590,#14591);+#14589 = CARTESIAN_POINT('',(3.25,-2.66,0.73));+#14590 = DIRECTION('',(0.,-1.,0.));+#14591 = DIRECTION('',(1.,0.,0.));+#14592 = PCURVE('',#14593,#14598);+#14593 = CYLINDRICAL_SURFACE('',#14594,5.25E-02);+#14594 = AXIS2_PLACEMENT_3D('',#14595,#14596,#14597);+#14595 = CARTESIAN_POINT('',(3.25,-2.75,0.73));+#14596 = DIRECTION('',(0.,1.,0.));+#14597 = DIRECTION('',(1.,0.,0.));+#14598 = DEFINITIONAL_REPRESENTATION('',(#14599),#14603);+#14599 = LINE('',#14600,#14601);+#14600 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#14601 = VECTOR('',#14602,1.);+#14602 = DIRECTION('',(-1.,-0.));+#14603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14604 = PCURVE('',#14605,#14610);+#14605 = PLANE('',#14606);+#14606 = AXIS2_PLACEMENT_3D('',#14607,#14608,#14609);+#14607 = CARTESIAN_POINT('',(3.861815252728,-2.66,0.337140815196));+#14608 = DIRECTION('',(0.,1.,0.));+#14609 = DIRECTION('',(0.,0.,1.));+#14610 = DEFINITIONAL_REPRESENTATION('',(#14611),#14619);+#14611 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14612,#14613,#14614,#14615+ ,#14616,#14617,#14618),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14612 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#14613 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#14614 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#14615 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#14616 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#14617 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#14618 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#14619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14620 = ORIENTED_EDGE('',*,*,#14621,.F.);+#14621 = EDGE_CURVE('',#14622,#14584,#14624,.T.);+#14622 = VERTEX_POINT('',#14623);+#14623 = CARTESIAN_POINT('',(3.2,-2.84,0.746007810594));+#14624 = SURFACE_CURVE('',#14625,(#14629,#14636),.PCURVE_S1.);+#14625 = LINE('',#14626,#14627);+#14626 = CARTESIAN_POINT('',(3.2,-2.75,0.746007810594));+#14627 = VECTOR('',#14628,1.);+#14628 = DIRECTION('',(0.,1.,0.));+#14629 = PCURVE('',#14593,#14630);+#14630 = DEFINITIONAL_REPRESENTATION('',(#14631),#14635);+#14631 = LINE('',#14632,#14633);+#14632 = CARTESIAN_POINT('',(3.451437293332,0.));+#14633 = VECTOR('',#14634,1.);+#14634 = DIRECTION('',(-0.,1.));+#14635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14636 = PCURVE('',#14637,#14642);+#14637 = PLANE('',#14638);+#14638 = AXIS2_PLACEMENT_3D('',#14639,#14640,#14641);+#14639 = CARTESIAN_POINT('',(3.2,-3.34,-0.5));+#14640 = DIRECTION('',(1.,0.,0.));+#14641 = DIRECTION('',(0.,0.,1.));+#14642 = DEFINITIONAL_REPRESENTATION('',(#14643),#14647);+#14643 = LINE('',#14644,#14645);+#14644 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#14645 = VECTOR('',#14646,1.);+#14646 = DIRECTION('',(0.,-1.));+#14647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14648 = ORIENTED_EDGE('',*,*,#14649,.F.);+#14649 = EDGE_CURVE('',#14650,#14622,#14652,.T.);+#14650 = VERTEX_POINT('',#14651);+#14651 = CARTESIAN_POINT('',(3.25,-2.84,0.7825));+#14652 = SURFACE_CURVE('',#14653,(#14658,#14665),.PCURVE_S1.);+#14653 = CIRCLE('',#14654,5.25E-02);+#14654 = AXIS2_PLACEMENT_3D('',#14655,#14656,#14657);+#14655 = CARTESIAN_POINT('',(3.25,-2.84,0.73));+#14656 = DIRECTION('',(0.,-1.,0.));+#14657 = DIRECTION('',(1.,0.,0.));+#14658 = PCURVE('',#14593,#14659);+#14659 = DEFINITIONAL_REPRESENTATION('',(#14660),#14664);+#14660 = LINE('',#14661,#14662);+#14661 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#14662 = VECTOR('',#14663,1.);+#14663 = DIRECTION('',(-1.,0.));+#14664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14665 = PCURVE('',#14666,#14671);+#14666 = PLANE('',#14667);+#14667 = AXIS2_PLACEMENT_3D('',#14668,#14669,#14670);+#14668 = CARTESIAN_POINT('',(3.861815252728,-2.84,0.337140815196));+#14669 = DIRECTION('',(0.,1.,0.));+#14670 = DIRECTION('',(0.,0.,1.));+#14671 = DEFINITIONAL_REPRESENTATION('',(#14672),#14680);+#14672 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14673,#14674,#14675,#14676+ ,#14677,#14678,#14679),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#14673 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#14674 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#14675 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#14676 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#14677 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#14678 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#14679 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#14680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14681 = ORIENTED_EDGE('',*,*,#14682,.T.);+#14682 = EDGE_CURVE('',#14650,#14582,#14683,.T.);+#14683 = SURFACE_CURVE('',#14684,(#14688,#14695),.PCURVE_S1.);+#14684 = LINE('',#14685,#14686);+#14685 = CARTESIAN_POINT('',(3.25,-2.84,0.7825));+#14686 = VECTOR('',#14687,1.);+#14687 = DIRECTION('',(0.,1.,0.));+#14688 = PCURVE('',#14593,#14689);+#14689 = DEFINITIONAL_REPRESENTATION('',(#14690),#14694);+#14690 = LINE('',#14691,#14692);+#14691 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#14692 = VECTOR('',#14693,1.);+#14693 = DIRECTION('',(0.,1.));+#14694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14695 = PCURVE('',#14696,#14701);+#14696 = PLANE('',#14697);+#14697 = AXIS2_PLACEMENT_3D('',#14698,#14699,#14700);+#14698 = CARTESIAN_POINT('',(3.25,-2.75,0.7825));+#14699 = DIRECTION('',(0.,0.,1.));+#14700 = DIRECTION('',(1.,0.,0.));+#14701 = DEFINITIONAL_REPRESENTATION('',(#14702),#14706);+#14702 = LINE('',#14703,#14704);+#14703 = CARTESIAN_POINT('',(0.,-9.E-02));+#14704 = VECTOR('',#14705,1.);+#14705 = DIRECTION('',(0.,1.));+#14706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14707 = ADVANCED_FACE('',(#14708),#14696,.T.);+#14708 = FACE_BOUND('',#14709,.T.);+#14709 = EDGE_LOOP('',(#14710,#14711,#14734,#14762));+#14710 = ORIENTED_EDGE('',*,*,#14682,.F.);+#14711 = ORIENTED_EDGE('',*,*,#14712,.T.);+#14712 = EDGE_CURVE('',#14650,#14713,#14715,.T.);+#14713 = VERTEX_POINT('',#14714);+#14714 = CARTESIAN_POINT('',(3.52308092439,-2.84,0.7825));+#14715 = SURFACE_CURVE('',#14716,(#14720,#14727),.PCURVE_S1.);+#14716 = LINE('',#14717,#14718);+#14717 = CARTESIAN_POINT('',(3.25,-2.84,0.7825));+#14718 = VECTOR('',#14719,1.);+#14719 = DIRECTION('',(1.,0.,0.));+#14720 = PCURVE('',#14696,#14721);+#14721 = DEFINITIONAL_REPRESENTATION('',(#14722),#14726);+#14722 = LINE('',#14723,#14724);+#14723 = CARTESIAN_POINT('',(0.,-9.E-02));+#14724 = VECTOR('',#14725,1.);+#14725 = DIRECTION('',(1.,0.));+#14726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14727 = PCURVE('',#14666,#14728);+#14728 = DEFINITIONAL_REPRESENTATION('',(#14729),#14733);+#14729 = LINE('',#14730,#14731);+#14730 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#14731 = VECTOR('',#14732,1.);+#14732 = DIRECTION('',(0.,1.));+#14733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14734 = ORIENTED_EDGE('',*,*,#14735,.T.);+#14735 = EDGE_CURVE('',#14713,#14736,#14738,.T.);+#14736 = VERTEX_POINT('',#14737);+#14737 = CARTESIAN_POINT('',(3.52308092439,-2.66,0.7825));+#14738 = SURFACE_CURVE('',#14739,(#14743,#14750),.PCURVE_S1.);+#14739 = LINE('',#14740,#14741);+#14740 = CARTESIAN_POINT('',(3.52308092439,-2.84,0.7825));+#14741 = VECTOR('',#14742,1.);+#14742 = DIRECTION('',(0.,1.,0.));+#14743 = PCURVE('',#14696,#14744);+#14744 = DEFINITIONAL_REPRESENTATION('',(#14745),#14749);+#14745 = LINE('',#14746,#14747);+#14746 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#14747 = VECTOR('',#14748,1.);+#14748 = DIRECTION('',(0.,1.));+#14749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14750 = PCURVE('',#14751,#14756);+#14751 = CYLINDRICAL_SURFACE('',#14752,0.147);+#14752 = AXIS2_PLACEMENT_3D('',#14753,#14754,#14755);+#14753 = CARTESIAN_POINT('',(3.52308092439,-2.75,0.6355));+#14754 = DIRECTION('',(0.,1.,0.));+#14755 = DIRECTION('',(0.,0.,1.));+#14756 = DEFINITIONAL_REPRESENTATION('',(#14757),#14761);+#14757 = LINE('',#14758,#14759);+#14758 = CARTESIAN_POINT('',(0.,-9.E-02));+#14759 = VECTOR('',#14760,1.);+#14760 = DIRECTION('',(-0.,1.));+#14761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14762 = ORIENTED_EDGE('',*,*,#14763,.F.);+#14763 = EDGE_CURVE('',#14582,#14736,#14764,.T.);+#14764 = SURFACE_CURVE('',#14765,(#14769,#14776),.PCURVE_S1.);+#14765 = LINE('',#14766,#14767);+#14766 = CARTESIAN_POINT('',(3.25,-2.66,0.7825));+#14767 = VECTOR('',#14768,1.);+#14768 = DIRECTION('',(1.,0.,0.));+#14769 = PCURVE('',#14696,#14770);+#14770 = DEFINITIONAL_REPRESENTATION('',(#14771),#14775);+#14771 = LINE('',#14772,#14773);+#14772 = CARTESIAN_POINT('',(0.,9.E-02));+#14773 = VECTOR('',#14774,1.);+#14774 = DIRECTION('',(1.,0.));+#14775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14776 = PCURVE('',#14605,#14777);+#14777 = DEFINITIONAL_REPRESENTATION('',(#14778),#14782);+#14778 = LINE('',#14779,#14780);+#14779 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#14780 = VECTOR('',#14781,1.);+#14781 = DIRECTION('',(0.,1.));+#14782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14783 = ADVANCED_FACE('',(#14784),#14605,.T.);+#14784 = FACE_BOUND('',#14785,.T.);+#14785 = EDGE_LOOP('',(#14786,#14787,#14788,#14812,#14840,#14869,#14897,+ #14925,#14953,#14982,#15010,#15039,#15067,#15100));+#14786 = ORIENTED_EDGE('',*,*,#14581,.F.);+#14787 = ORIENTED_EDGE('',*,*,#14763,.T.);+#14788 = ORIENTED_EDGE('',*,*,#14789,.T.);+#14789 = EDGE_CURVE('',#14736,#14790,#14792,.T.);+#14790 = VERTEX_POINT('',#14791);+#14791 = CARTESIAN_POINT('',(3.653021649751,-2.66,0.704234328342));+#14792 = SURFACE_CURVE('',#14793,(#14798,#14805),.PCURVE_S1.);+#14793 = CIRCLE('',#14794,0.147);+#14794 = AXIS2_PLACEMENT_3D('',#14795,#14796,#14797);+#14795 = CARTESIAN_POINT('',(3.52308092439,-2.66,0.6355));+#14796 = DIRECTION('',(0.,1.,0.));+#14797 = DIRECTION('',(0.,0.,1.));+#14798 = PCURVE('',#14605,#14799);+#14799 = DEFINITIONAL_REPRESENTATION('',(#14800),#14804);+#14800 = CIRCLE('',#14801,0.147);+#14801 = AXIS2_PLACEMENT_2D('',#14802,#14803);+#14802 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#14803 = DIRECTION('',(1.,0.));+#14804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14805 = PCURVE('',#14751,#14806);+#14806 = DEFINITIONAL_REPRESENTATION('',(#14807),#14811);+#14807 = LINE('',#14808,#14809);+#14808 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#14809 = VECTOR('',#14810,1.);+#14810 = DIRECTION('',(1.,-0.));+#14811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14812 = ORIENTED_EDGE('',*,*,#14813,.T.);+#14813 = EDGE_CURVE('',#14790,#14814,#14816,.T.);+#14814 = VERTEX_POINT('',#14815);+#14815 = CARTESIAN_POINT('',(3.958168154079,-2.66,0.127361620474));+#14816 = SURFACE_CURVE('',#14817,(#14821,#14828),.PCURVE_S1.);+#14817 = LINE('',#14818,#14819);+#14818 = CARTESIAN_POINT('',(3.626407401915,-2.66,0.754547974408));+#14819 = VECTOR('',#14820,1.);+#14820 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#14821 = PCURVE('',#14605,#14822);+#14822 = DEFINITIONAL_REPRESENTATION('',(#14823),#14827);+#14823 = LINE('',#14824,#14825);+#14824 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#14825 = VECTOR('',#14826,1.);+#14826 = DIRECTION('',(-0.883950512662,0.467580464908));+#14827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14828 = PCURVE('',#14829,#14834);+#14829 = PLANE('',#14830);+#14830 = AXIS2_PLACEMENT_3D('',#14831,#14832,#14833);+#14831 = CARTESIAN_POINT('',(3.653021649751,-2.75,0.704234328342));+#14832 = DIRECTION('',(0.883950512662,0.,0.467580464908));+#14833 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#14834 = DEFINITIONAL_REPRESENTATION('',(#14835),#14839);+#14835 = LINE('',#14836,#14837);+#14836 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#14837 = VECTOR('',#14838,1.);+#14838 = DIRECTION('',(1.,0.));+#14839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14840 = ORIENTED_EDGE('',*,*,#14841,.F.);+#14841 = EDGE_CURVE('',#14842,#14814,#14844,.T.);+#14842 = VERTEX_POINT('',#14843);+#14843 = CARTESIAN_POINT('',(3.99529407561,-2.66,0.105));+#14844 = SURFACE_CURVE('',#14845,(#14850,#14857),.PCURVE_S1.);+#14845 = CIRCLE('',#14846,4.2E-02);+#14846 = AXIS2_PLACEMENT_3D('',#14847,#14848,#14849);+#14847 = CARTESIAN_POINT('',(3.99529407561,-2.66,0.147));+#14848 = DIRECTION('',(0.,1.,0.));+#14849 = DIRECTION('',(0.,0.,1.));+#14850 = PCURVE('',#14605,#14851);+#14851 = DEFINITIONAL_REPRESENTATION('',(#14852),#14856);+#14852 = CIRCLE('',#14853,4.2E-02);+#14853 = AXIS2_PLACEMENT_2D('',#14854,#14855);+#14854 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#14855 = DIRECTION('',(1.,0.));+#14856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14857 = PCURVE('',#14858,#14863);+#14858 = CYLINDRICAL_SURFACE('',#14859,4.2E-02);+#14859 = AXIS2_PLACEMENT_3D('',#14860,#14861,#14862);+#14860 = CARTESIAN_POINT('',(3.99529407561,-2.75,0.147));+#14861 = DIRECTION('',(0.,1.,0.));+#14862 = DIRECTION('',(0.,0.,1.));+#14863 = DEFINITIONAL_REPRESENTATION('',(#14864),#14868);+#14864 = LINE('',#14865,#14866);+#14865 = CARTESIAN_POINT('',(-0.,9.E-02));+#14866 = VECTOR('',#14867,1.);+#14867 = DIRECTION('',(1.,-0.));+#14868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14869 = ORIENTED_EDGE('',*,*,#14870,.T.);+#14870 = EDGE_CURVE('',#14842,#14871,#14873,.T.);+#14871 = VERTEX_POINT('',#14872);+#14872 = CARTESIAN_POINT('',(4.43,-2.66,0.105));+#14873 = SURFACE_CURVE('',#14874,(#14878,#14885),.PCURVE_S1.);+#14874 = LINE('',#14875,#14876);+#14875 = CARTESIAN_POINT('',(3.938375,-2.66,0.105));+#14876 = VECTOR('',#14877,1.);+#14877 = DIRECTION('',(1.,0.,0.));+#14878 = PCURVE('',#14605,#14879);+#14879 = DEFINITIONAL_REPRESENTATION('',(#14880),#14884);+#14880 = LINE('',#14881,#14882);+#14881 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#14882 = VECTOR('',#14883,1.);+#14883 = DIRECTION('',(0.,1.));+#14884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14885 = PCURVE('',#14886,#14891);+#14886 = PLANE('',#14887);+#14887 = AXIS2_PLACEMENT_3D('',#14888,#14889,#14890);+#14888 = CARTESIAN_POINT('',(3.99529407561,-2.75,0.105));+#14889 = DIRECTION('',(0.,0.,1.));+#14890 = DIRECTION('',(1.,0.,0.));+#14891 = DEFINITIONAL_REPRESENTATION('',(#14892),#14896);+#14892 = LINE('',#14893,#14894);+#14893 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#14894 = VECTOR('',#14895,1.);+#14895 = DIRECTION('',(1.,0.));+#14896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14897 = ORIENTED_EDGE('',*,*,#14898,.T.);+#14898 = EDGE_CURVE('',#14871,#14899,#14901,.T.);+#14899 = VERTEX_POINT('',#14900);+#14900 = CARTESIAN_POINT('',(4.43,-2.66,0.));+#14901 = SURFACE_CURVE('',#14902,(#14906,#14913),.PCURVE_S1.);+#14902 = LINE('',#14903,#14904);+#14903 = CARTESIAN_POINT('',(4.43,-2.66,-8.142959240193E-02));+#14904 = VECTOR('',#14905,1.);+#14905 = DIRECTION('',(0.,0.,-1.));+#14906 = PCURVE('',#14605,#14907);+#14907 = DEFINITIONAL_REPRESENTATION('',(#14908),#14912);+#14908 = LINE('',#14909,#14910);+#14909 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#14910 = VECTOR('',#14911,1.);+#14911 = DIRECTION('',(-1.,0.));+#14912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14913 = PCURVE('',#14914,#14919);+#14914 = PLANE('',#14915);+#14915 = AXIS2_PLACEMENT_3D('',#14916,#14917,#14918);+#14916 = CARTESIAN_POINT('',(4.43,-3.34,-0.5));+#14917 = DIRECTION('',(1.,0.,0.));+#14918 = DIRECTION('',(0.,0.,1.));+#14919 = DEFINITIONAL_REPRESENTATION('',(#14920),#14924);+#14920 = LINE('',#14921,#14922);+#14921 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#14922 = VECTOR('',#14923,1.);+#14923 = DIRECTION('',(-1.,0.));+#14924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14925 = ORIENTED_EDGE('',*,*,#14926,.F.);+#14926 = EDGE_CURVE('',#14927,#14899,#14929,.T.);+#14927 = VERTEX_POINT('',#14928);+#14928 = CARTESIAN_POINT('',(3.99529407561,-2.66,0.));+#14929 = SURFACE_CURVE('',#14930,(#14934,#14941),.PCURVE_S1.);+#14930 = LINE('',#14931,#14932);+#14931 = CARTESIAN_POINT('',(3.938375,-2.66,0.));+#14932 = VECTOR('',#14933,1.);+#14933 = DIRECTION('',(1.,0.,0.));+#14934 = PCURVE('',#14605,#14935);+#14935 = DEFINITIONAL_REPRESENTATION('',(#14936),#14940);+#14936 = LINE('',#14937,#14938);+#14937 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#14938 = VECTOR('',#14939,1.);+#14939 = DIRECTION('',(0.,1.));+#14940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14941 = PCURVE('',#14942,#14947);+#14942 = PLANE('',#14943);+#14943 = AXIS2_PLACEMENT_3D('',#14944,#14945,#14946);+#14944 = CARTESIAN_POINT('',(3.99529407561,-2.75,0.));+#14945 = DIRECTION('',(0.,0.,1.));+#14946 = DIRECTION('',(1.,0.,0.));+#14947 = DEFINITIONAL_REPRESENTATION('',(#14948),#14952);+#14948 = LINE('',#14949,#14950);+#14949 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#14950 = VECTOR('',#14951,1.);+#14951 = DIRECTION('',(1.,0.));+#14952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14953 = ORIENTED_EDGE('',*,*,#14954,.T.);+#14954 = EDGE_CURVE('',#14927,#14955,#14957,.T.);+#14955 = VERTEX_POINT('',#14956);+#14956 = CARTESIAN_POINT('',(3.865353350249,-2.66,7.826567165848E-02));+#14957 = SURFACE_CURVE('',#14958,(#14963,#14970),.PCURVE_S1.);+#14958 = CIRCLE('',#14959,0.147);+#14959 = AXIS2_PLACEMENT_3D('',#14960,#14961,#14962);+#14960 = CARTESIAN_POINT('',(3.99529407561,-2.66,0.147));+#14961 = DIRECTION('',(0.,1.,0.));+#14962 = DIRECTION('',(0.,0.,1.));+#14963 = PCURVE('',#14605,#14964);+#14964 = DEFINITIONAL_REPRESENTATION('',(#14965),#14969);+#14965 = CIRCLE('',#14966,0.147);+#14966 = AXIS2_PLACEMENT_2D('',#14967,#14968);+#14967 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#14968 = DIRECTION('',(1.,0.));+#14969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14970 = PCURVE('',#14971,#14976);+#14971 = CYLINDRICAL_SURFACE('',#14972,0.147);+#14972 = AXIS2_PLACEMENT_3D('',#14973,#14974,#14975);+#14973 = CARTESIAN_POINT('',(3.99529407561,-2.75,0.147));+#14974 = DIRECTION('',(0.,1.,0.));+#14975 = DIRECTION('',(0.,0.,1.));+#14976 = DEFINITIONAL_REPRESENTATION('',(#14977),#14981);+#14977 = LINE('',#14978,#14979);+#14978 = CARTESIAN_POINT('',(-0.,9.E-02));+#14979 = VECTOR('',#14980,1.);+#14980 = DIRECTION('',(1.,-0.));+#14981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14982 = ORIENTED_EDGE('',*,*,#14983,.F.);+#14983 = EDGE_CURVE('',#14984,#14955,#14986,.T.);+#14984 = VERTEX_POINT('',#14985);+#14985 = CARTESIAN_POINT('',(3.560206845921,-2.66,0.655138379526));+#14986 = SURFACE_CURVE('',#14987,(#14991,#14998),.PCURVE_S1.);+#14987 = LINE('',#14988,#14989);+#14988 = CARTESIAN_POINT('',(3.533592598085,-2.66,0.705452025592));+#14989 = VECTOR('',#14990,1.);+#14990 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#14991 = PCURVE('',#14605,#14992);+#14992 = DEFINITIONAL_REPRESENTATION('',(#14993),#14997);+#14993 = LINE('',#14994,#14995);+#14994 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#14995 = VECTOR('',#14996,1.);+#14996 = DIRECTION('',(-0.883950512662,0.467580464908));+#14997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14998 = PCURVE('',#14999,#15004);+#14999 = PLANE('',#15000);+#15000 = AXIS2_PLACEMENT_3D('',#15001,#15002,#15003);+#15001 = CARTESIAN_POINT('',(3.560206845921,-2.75,0.655138379526));+#15002 = DIRECTION('',(0.883950512662,0.,0.467580464908));+#15003 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#15004 = DEFINITIONAL_REPRESENTATION('',(#15005),#15009);+#15005 = LINE('',#15006,#15007);+#15006 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#15007 = VECTOR('',#15008,1.);+#15008 = DIRECTION('',(1.,0.));+#15009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15010 = ORIENTED_EDGE('',*,*,#15011,.F.);+#15011 = EDGE_CURVE('',#15012,#14984,#15014,.T.);+#15012 = VERTEX_POINT('',#15013);+#15013 = CARTESIAN_POINT('',(3.52308092439,-2.66,0.6775));+#15014 = SURFACE_CURVE('',#15015,(#15020,#15027),.PCURVE_S1.);+#15015 = CIRCLE('',#15016,4.2E-02);+#15016 = AXIS2_PLACEMENT_3D('',#15017,#15018,#15019);+#15017 = CARTESIAN_POINT('',(3.52308092439,-2.66,0.6355));+#15018 = DIRECTION('',(0.,1.,0.));+#15019 = DIRECTION('',(0.,0.,1.));+#15020 = PCURVE('',#14605,#15021);+#15021 = DEFINITIONAL_REPRESENTATION('',(#15022),#15026);+#15022 = CIRCLE('',#15023,4.2E-02);+#15023 = AXIS2_PLACEMENT_2D('',#15024,#15025);+#15024 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#15025 = DIRECTION('',(1.,0.));+#15026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15027 = PCURVE('',#15028,#15033);+#15028 = CYLINDRICAL_SURFACE('',#15029,4.2E-02);+#15029 = AXIS2_PLACEMENT_3D('',#15030,#15031,#15032);+#15030 = CARTESIAN_POINT('',(3.52308092439,-2.75,0.6355));+#15031 = DIRECTION('',(0.,1.,0.));+#15032 = DIRECTION('',(0.,0.,1.));+#15033 = DEFINITIONAL_REPRESENTATION('',(#15034),#15038);+#15034 = LINE('',#15035,#15036);+#15035 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#15036 = VECTOR('',#15037,1.);+#15037 = DIRECTION('',(1.,-0.));+#15038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15039 = ORIENTED_EDGE('',*,*,#15040,.F.);+#15040 = EDGE_CURVE('',#15041,#15012,#15043,.T.);+#15041 = VERTEX_POINT('',#15042);+#15042 = CARTESIAN_POINT('',(3.25,-2.66,0.6775));+#15043 = SURFACE_CURVE('',#15044,(#15048,#15055),.PCURVE_S1.);+#15044 = LINE('',#15045,#15046);+#15045 = CARTESIAN_POINT('',(3.25,-2.66,0.6775));+#15046 = VECTOR('',#15047,1.);+#15047 = DIRECTION('',(1.,0.,0.));+#15048 = PCURVE('',#14605,#15049);+#15049 = DEFINITIONAL_REPRESENTATION('',(#15050),#15054);+#15050 = LINE('',#15051,#15052);+#15051 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#15052 = VECTOR('',#15053,1.);+#15053 = DIRECTION('',(0.,1.));+#15054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15055 = PCURVE('',#15056,#15061);+#15056 = PLANE('',#15057);+#15057 = AXIS2_PLACEMENT_3D('',#15058,#15059,#15060);+#15058 = CARTESIAN_POINT('',(3.25,-2.75,0.6775));+#15059 = DIRECTION('',(0.,0.,1.));+#15060 = DIRECTION('',(1.,0.,0.));+#15061 = DEFINITIONAL_REPRESENTATION('',(#15062),#15066);+#15062 = LINE('',#15063,#15064);+#15063 = CARTESIAN_POINT('',(0.,9.E-02));+#15064 = VECTOR('',#15065,1.);+#15065 = DIRECTION('',(1.,0.));+#15066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15067 = ORIENTED_EDGE('',*,*,#15068,.F.);+#15068 = EDGE_CURVE('',#15069,#15041,#15071,.T.);+#15069 = VERTEX_POINT('',#15070);+#15070 = CARTESIAN_POINT('',(3.2,-2.66,0.713992189406));+#15071 = SURFACE_CURVE('',#15072,(#15077,#15088),.PCURVE_S1.);+#15072 = CIRCLE('',#15073,5.25E-02);+#15073 = AXIS2_PLACEMENT_3D('',#15074,#15075,#15076);+#15074 = CARTESIAN_POINT('',(3.25,-2.66,0.73));+#15075 = DIRECTION('',(0.,-1.,0.));+#15076 = DIRECTION('',(1.,0.,0.));+#15077 = PCURVE('',#14605,#15078);+#15078 = DEFINITIONAL_REPRESENTATION('',(#15079),#15087);+#15079 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15080,#15081,#15082,#15083+ ,#15084,#15085,#15086),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15080 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#15081 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#15082 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#15083 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#15084 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#15085 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#15086 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#15087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15088 = PCURVE('',#15089,#15094);+#15089 = CYLINDRICAL_SURFACE('',#15090,5.25E-02);+#15090 = AXIS2_PLACEMENT_3D('',#15091,#15092,#15093);+#15091 = CARTESIAN_POINT('',(3.25,-2.75,0.73));+#15092 = DIRECTION('',(0.,1.,0.));+#15093 = DIRECTION('',(1.,0.,0.));+#15094 = DEFINITIONAL_REPRESENTATION('',(#15095),#15099);+#15095 = LINE('',#15096,#15097);+#15096 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#15097 = VECTOR('',#15098,1.);+#15098 = DIRECTION('',(-1.,-0.));+#15099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15100 = ORIENTED_EDGE('',*,*,#15101,.F.);+#15101 = EDGE_CURVE('',#14584,#15069,#15102,.T.);+#15102 = SURFACE_CURVE('',#15103,(#15107,#15114),.PCURVE_S1.);+#15103 = LINE('',#15104,#15105);+#15104 = CARTESIAN_POINT('',(3.2,-2.66,-8.142959240193E-02));+#15105 = VECTOR('',#15106,1.);+#15106 = DIRECTION('',(0.,0.,-1.));+#15107 = PCURVE('',#14605,#15108);+#15108 = DEFINITIONAL_REPRESENTATION('',(#15109),#15113);+#15109 = LINE('',#15110,#15111);+#15110 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#15111 = VECTOR('',#15112,1.);+#15112 = DIRECTION('',(-1.,0.));+#15113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15114 = PCURVE('',#14637,#15115);+#15115 = DEFINITIONAL_REPRESENTATION('',(#15116),#15120);+#15116 = LINE('',#15117,#15118);+#15117 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#15118 = VECTOR('',#15119,1.);+#15119 = DIRECTION('',(-1.,0.));+#15120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15121 = ADVANCED_FACE('',(#15122),#14637,.F.);+#15122 = FACE_BOUND('',#15123,.F.);+#15123 = EDGE_LOOP('',(#15124,#15125,#15148,#15169));+#15124 = ORIENTED_EDGE('',*,*,#14621,.F.);+#15125 = ORIENTED_EDGE('',*,*,#15126,.T.);+#15126 = EDGE_CURVE('',#14622,#15127,#15129,.T.);+#15127 = VERTEX_POINT('',#15128);+#15128 = CARTESIAN_POINT('',(3.2,-2.84,0.713992189406));+#15129 = SURFACE_CURVE('',#15130,(#15134,#15141),.PCURVE_S1.);+#15130 = LINE('',#15131,#15132);+#15131 = CARTESIAN_POINT('',(3.2,-2.84,-8.142959240193E-02));+#15132 = VECTOR('',#15133,1.);+#15133 = DIRECTION('',(0.,0.,-1.));+#15134 = PCURVE('',#14637,#15135);+#15135 = DEFINITIONAL_REPRESENTATION('',(#15136),#15140);+#15136 = LINE('',#15137,#15138);+#15137 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#15138 = VECTOR('',#15139,1.);+#15139 = DIRECTION('',(-1.,0.));+#15140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15141 = PCURVE('',#14666,#15142);+#15142 = DEFINITIONAL_REPRESENTATION('',(#15143),#15147);+#15143 = LINE('',#15144,#15145);+#15144 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#15145 = VECTOR('',#15146,1.);+#15146 = DIRECTION('',(-1.,0.));+#15147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15148 = ORIENTED_EDGE('',*,*,#15149,.T.);+#15149 = EDGE_CURVE('',#15127,#15069,#15150,.T.);+#15150 = SURFACE_CURVE('',#15151,(#15155,#15162),.PCURVE_S1.);+#15151 = LINE('',#15152,#15153);+#15152 = CARTESIAN_POINT('',(3.2,-2.75,0.713992189406));+#15153 = VECTOR('',#15154,1.);+#15154 = DIRECTION('',(0.,1.,0.));+#15155 = PCURVE('',#14637,#15156);+#15156 = DEFINITIONAL_REPRESENTATION('',(#15157),#15161);+#15157 = LINE('',#15158,#15159);+#15158 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#15159 = VECTOR('',#15160,1.);+#15160 = DIRECTION('',(0.,-1.));+#15161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15162 = PCURVE('',#15089,#15163);+#15163 = DEFINITIONAL_REPRESENTATION('',(#15164),#15168);+#15164 = LINE('',#15165,#15166);+#15165 = CARTESIAN_POINT('',(2.831748013849,0.));+#15166 = VECTOR('',#15167,1.);+#15167 = DIRECTION('',(-0.,1.));+#15168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15169 = ORIENTED_EDGE('',*,*,#15101,.F.);+#15170 = ADVANCED_FACE('',(#15171),#14666,.F.);+#15171 = FACE_BOUND('',#15172,.F.);+#15172 = EDGE_LOOP('',(#15173,#15174,#15175,#15199,#15222,#15246,#15269,+ #15292,#15315,#15339,#15362,#15386,#15409,#15435));+#15173 = ORIENTED_EDGE('',*,*,#14649,.F.);+#15174 = ORIENTED_EDGE('',*,*,#14712,.T.);+#15175 = ORIENTED_EDGE('',*,*,#15176,.T.);+#15176 = EDGE_CURVE('',#14713,#15177,#15179,.T.);+#15177 = VERTEX_POINT('',#15178);+#15178 = CARTESIAN_POINT('',(3.653021649751,-2.84,0.704234328342));+#15179 = SURFACE_CURVE('',#15180,(#15185,#15192),.PCURVE_S1.);+#15180 = CIRCLE('',#15181,0.147);+#15181 = AXIS2_PLACEMENT_3D('',#15182,#15183,#15184);+#15182 = CARTESIAN_POINT('',(3.52308092439,-2.84,0.6355));+#15183 = DIRECTION('',(0.,1.,0.));+#15184 = DIRECTION('',(0.,0.,1.));+#15185 = PCURVE('',#14666,#15186);+#15186 = DEFINITIONAL_REPRESENTATION('',(#15187),#15191);+#15187 = CIRCLE('',#15188,0.147);+#15188 = AXIS2_PLACEMENT_2D('',#15189,#15190);+#15189 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#15190 = DIRECTION('',(1.,0.));+#15191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15192 = PCURVE('',#14751,#15193);+#15193 = DEFINITIONAL_REPRESENTATION('',(#15194),#15198);+#15194 = LINE('',#15195,#15196);+#15195 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#15196 = VECTOR('',#15197,1.);+#15197 = DIRECTION('',(1.,0.));+#15198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15199 = ORIENTED_EDGE('',*,*,#15200,.T.);+#15200 = EDGE_CURVE('',#15177,#15201,#15203,.T.);+#15201 = VERTEX_POINT('',#15202);+#15202 = CARTESIAN_POINT('',(3.958168154079,-2.84,0.127361620474));+#15203 = SURFACE_CURVE('',#15204,(#15208,#15215),.PCURVE_S1.);+#15204 = LINE('',#15205,#15206);+#15205 = CARTESIAN_POINT('',(3.626407401915,-2.84,0.754547974408));+#15206 = VECTOR('',#15207,1.);+#15207 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#15208 = PCURVE('',#14666,#15209);+#15209 = DEFINITIONAL_REPRESENTATION('',(#15210),#15214);+#15210 = LINE('',#15211,#15212);+#15211 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#15212 = VECTOR('',#15213,1.);+#15213 = DIRECTION('',(-0.883950512662,0.467580464908));+#15214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15215 = PCURVE('',#14829,#15216);+#15216 = DEFINITIONAL_REPRESENTATION('',(#15217),#15221);+#15217 = LINE('',#15218,#15219);+#15218 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#15219 = VECTOR('',#15220,1.);+#15220 = DIRECTION('',(1.,0.));+#15221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15222 = ORIENTED_EDGE('',*,*,#15223,.F.);+#15223 = EDGE_CURVE('',#15224,#15201,#15226,.T.);+#15224 = VERTEX_POINT('',#15225);+#15225 = CARTESIAN_POINT('',(3.99529407561,-2.84,0.105));+#15226 = SURFACE_CURVE('',#15227,(#15232,#15239),.PCURVE_S1.);+#15227 = CIRCLE('',#15228,4.2E-02);+#15228 = AXIS2_PLACEMENT_3D('',#15229,#15230,#15231);+#15229 = CARTESIAN_POINT('',(3.99529407561,-2.84,0.147));+#15230 = DIRECTION('',(0.,1.,0.));+#15231 = DIRECTION('',(0.,0.,1.));+#15232 = PCURVE('',#14666,#15233);+#15233 = DEFINITIONAL_REPRESENTATION('',(#15234),#15238);+#15234 = CIRCLE('',#15235,4.2E-02);+#15235 = AXIS2_PLACEMENT_2D('',#15236,#15237);+#15236 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#15237 = DIRECTION('',(1.,0.));+#15238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15239 = PCURVE('',#14858,#15240);+#15240 = DEFINITIONAL_REPRESENTATION('',(#15241),#15245);+#15241 = LINE('',#15242,#15243);+#15242 = CARTESIAN_POINT('',(0.,-9.E-02));+#15243 = VECTOR('',#15244,1.);+#15244 = DIRECTION('',(1.,0.));+#15245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15246 = ORIENTED_EDGE('',*,*,#15247,.T.);+#15247 = EDGE_CURVE('',#15224,#15248,#15250,.T.);+#15248 = VERTEX_POINT('',#15249);+#15249 = CARTESIAN_POINT('',(4.43,-2.84,0.105));+#15250 = SURFACE_CURVE('',#15251,(#15255,#15262),.PCURVE_S1.);+#15251 = LINE('',#15252,#15253);+#15252 = CARTESIAN_POINT('',(3.938375,-2.84,0.105));+#15253 = VECTOR('',#15254,1.);+#15254 = DIRECTION('',(1.,0.,0.));+#15255 = PCURVE('',#14666,#15256);+#15256 = DEFINITIONAL_REPRESENTATION('',(#15257),#15261);+#15257 = LINE('',#15258,#15259);+#15258 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#15259 = VECTOR('',#15260,1.);+#15260 = DIRECTION('',(0.,1.));+#15261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15262 = PCURVE('',#14886,#15263);+#15263 = DEFINITIONAL_REPRESENTATION('',(#15264),#15268);+#15264 = LINE('',#15265,#15266);+#15265 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#15266 = VECTOR('',#15267,1.);+#15267 = DIRECTION('',(1.,0.));+#15268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15269 = ORIENTED_EDGE('',*,*,#15270,.T.);+#15270 = EDGE_CURVE('',#15248,#15271,#15273,.T.);+#15271 = VERTEX_POINT('',#15272);+#15272 = CARTESIAN_POINT('',(4.43,-2.84,0.));+#15273 = SURFACE_CURVE('',#15274,(#15278,#15285),.PCURVE_S1.);+#15274 = LINE('',#15275,#15276);+#15275 = CARTESIAN_POINT('',(4.43,-2.84,-8.142959240193E-02));+#15276 = VECTOR('',#15277,1.);+#15277 = DIRECTION('',(0.,0.,-1.));+#15278 = PCURVE('',#14666,#15279);+#15279 = DEFINITIONAL_REPRESENTATION('',(#15280),#15284);+#15280 = LINE('',#15281,#15282);+#15281 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#15282 = VECTOR('',#15283,1.);+#15283 = DIRECTION('',(-1.,0.));+#15284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15285 = PCURVE('',#14914,#15286);+#15286 = DEFINITIONAL_REPRESENTATION('',(#15287),#15291);+#15287 = LINE('',#15288,#15289);+#15288 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#15289 = VECTOR('',#15290,1.);+#15290 = DIRECTION('',(-1.,0.));+#15291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15292 = ORIENTED_EDGE('',*,*,#15293,.F.);+#15293 = EDGE_CURVE('',#15294,#15271,#15296,.T.);+#15294 = VERTEX_POINT('',#15295);+#15295 = CARTESIAN_POINT('',(3.99529407561,-2.84,0.));+#15296 = SURFACE_CURVE('',#15297,(#15301,#15308),.PCURVE_S1.);+#15297 = LINE('',#15298,#15299);+#15298 = CARTESIAN_POINT('',(3.938375,-2.84,0.));+#15299 = VECTOR('',#15300,1.);+#15300 = DIRECTION('',(1.,0.,0.));+#15301 = PCURVE('',#14666,#15302);+#15302 = DEFINITIONAL_REPRESENTATION('',(#15303),#15307);+#15303 = LINE('',#15304,#15305);+#15304 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#15305 = VECTOR('',#15306,1.);+#15306 = DIRECTION('',(0.,1.));+#15307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15308 = PCURVE('',#14942,#15309);+#15309 = DEFINITIONAL_REPRESENTATION('',(#15310),#15314);+#15310 = LINE('',#15311,#15312);+#15311 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#15312 = VECTOR('',#15313,1.);+#15313 = DIRECTION('',(1.,0.));+#15314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15315 = ORIENTED_EDGE('',*,*,#15316,.T.);+#15316 = EDGE_CURVE('',#15294,#15317,#15319,.T.);+#15317 = VERTEX_POINT('',#15318);+#15318 = CARTESIAN_POINT('',(3.865353350249,-2.84,7.826567165848E-02));+#15319 = SURFACE_CURVE('',#15320,(#15325,#15332),.PCURVE_S1.);+#15320 = CIRCLE('',#15321,0.147);+#15321 = AXIS2_PLACEMENT_3D('',#15322,#15323,#15324);+#15322 = CARTESIAN_POINT('',(3.99529407561,-2.84,0.147));+#15323 = DIRECTION('',(0.,1.,0.));+#15324 = DIRECTION('',(0.,0.,1.));+#15325 = PCURVE('',#14666,#15326);+#15326 = DEFINITIONAL_REPRESENTATION('',(#15327),#15331);+#15327 = CIRCLE('',#15328,0.147);+#15328 = AXIS2_PLACEMENT_2D('',#15329,#15330);+#15329 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#15330 = DIRECTION('',(1.,0.));+#15331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15332 = PCURVE('',#14971,#15333);+#15333 = DEFINITIONAL_REPRESENTATION('',(#15334),#15338);+#15334 = LINE('',#15335,#15336);+#15335 = CARTESIAN_POINT('',(0.,-9.E-02));+#15336 = VECTOR('',#15337,1.);+#15337 = DIRECTION('',(1.,0.));+#15338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15339 = ORIENTED_EDGE('',*,*,#15340,.F.);+#15340 = EDGE_CURVE('',#15341,#15317,#15343,.T.);+#15341 = VERTEX_POINT('',#15342);+#15342 = CARTESIAN_POINT('',(3.560206845921,-2.84,0.655138379526));+#15343 = SURFACE_CURVE('',#15344,(#15348,#15355),.PCURVE_S1.);+#15344 = LINE('',#15345,#15346);+#15345 = CARTESIAN_POINT('',(3.533592598085,-2.84,0.705452025592));+#15346 = VECTOR('',#15347,1.);+#15347 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#15348 = PCURVE('',#14666,#15349);+#15349 = DEFINITIONAL_REPRESENTATION('',(#15350),#15354);+#15350 = LINE('',#15351,#15352);+#15351 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#15352 = VECTOR('',#15353,1.);+#15353 = DIRECTION('',(-0.883950512662,0.467580464908));+#15354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15355 = PCURVE('',#14999,#15356);+#15356 = DEFINITIONAL_REPRESENTATION('',(#15357),#15361);+#15357 = LINE('',#15358,#15359);+#15358 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#15359 = VECTOR('',#15360,1.);+#15360 = DIRECTION('',(1.,0.));+#15361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15362 = ORIENTED_EDGE('',*,*,#15363,.F.);+#15363 = EDGE_CURVE('',#15364,#15341,#15366,.T.);+#15364 = VERTEX_POINT('',#15365);+#15365 = CARTESIAN_POINT('',(3.52308092439,-2.84,0.6775));+#15366 = SURFACE_CURVE('',#15367,(#15372,#15379),.PCURVE_S1.);+#15367 = CIRCLE('',#15368,4.2E-02);+#15368 = AXIS2_PLACEMENT_3D('',#15369,#15370,#15371);+#15369 = CARTESIAN_POINT('',(3.52308092439,-2.84,0.6355));+#15370 = DIRECTION('',(0.,1.,0.));+#15371 = DIRECTION('',(0.,0.,1.));+#15372 = PCURVE('',#14666,#15373);+#15373 = DEFINITIONAL_REPRESENTATION('',(#15374),#15378);+#15374 = CIRCLE('',#15375,4.2E-02);+#15375 = AXIS2_PLACEMENT_2D('',#15376,#15377);+#15376 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#15377 = DIRECTION('',(1.,0.));+#15378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15379 = PCURVE('',#15028,#15380);+#15380 = DEFINITIONAL_REPRESENTATION('',(#15381),#15385);+#15381 = LINE('',#15382,#15383);+#15382 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#15383 = VECTOR('',#15384,1.);+#15384 = DIRECTION('',(1.,0.));+#15385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15386 = ORIENTED_EDGE('',*,*,#15387,.F.);+#15387 = EDGE_CURVE('',#15388,#15364,#15390,.T.);+#15388 = VERTEX_POINT('',#15389);+#15389 = CARTESIAN_POINT('',(3.25,-2.84,0.6775));+#15390 = SURFACE_CURVE('',#15391,(#15395,#15402),.PCURVE_S1.);+#15391 = LINE('',#15392,#15393);+#15392 = CARTESIAN_POINT('',(3.25,-2.84,0.6775));+#15393 = VECTOR('',#15394,1.);+#15394 = DIRECTION('',(1.,0.,0.));+#15395 = PCURVE('',#14666,#15396);+#15396 = DEFINITIONAL_REPRESENTATION('',(#15397),#15401);+#15397 = LINE('',#15398,#15399);+#15398 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#15399 = VECTOR('',#15400,1.);+#15400 = DIRECTION('',(0.,1.));+#15401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15402 = PCURVE('',#15056,#15403);+#15403 = DEFINITIONAL_REPRESENTATION('',(#15404),#15408);+#15404 = LINE('',#15405,#15406);+#15405 = CARTESIAN_POINT('',(0.,-9.E-02));+#15406 = VECTOR('',#15407,1.);+#15407 = DIRECTION('',(1.,0.));+#15408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15409 = ORIENTED_EDGE('',*,*,#15410,.F.);+#15410 = EDGE_CURVE('',#15127,#15388,#15411,.T.);+#15411 = SURFACE_CURVE('',#15412,(#15417,#15428),.PCURVE_S1.);+#15412 = CIRCLE('',#15413,5.25E-02);+#15413 = AXIS2_PLACEMENT_3D('',#15414,#15415,#15416);+#15414 = CARTESIAN_POINT('',(3.25,-2.84,0.73));+#15415 = DIRECTION('',(0.,-1.,0.));+#15416 = DIRECTION('',(1.,0.,0.));+#15417 = PCURVE('',#14666,#15418);+#15418 = DEFINITIONAL_REPRESENTATION('',(#15419),#15427);+#15419 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15420,#15421,#15422,#15423+ ,#15424,#15425,#15426),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15420 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#15421 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#15422 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#15423 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#15424 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#15425 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#15426 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#15427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15428 = PCURVE('',#15089,#15429);+#15429 = DEFINITIONAL_REPRESENTATION('',(#15430),#15434);+#15430 = LINE('',#15431,#15432);+#15431 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#15432 = VECTOR('',#15433,1.);+#15433 = DIRECTION('',(-1.,0.));+#15434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15435 = ORIENTED_EDGE('',*,*,#15126,.F.);+#15436 = ADVANCED_FACE('',(#15437),#14751,.T.);+#15437 = FACE_BOUND('',#15438,.T.);+#15438 = EDGE_LOOP('',(#15439,#15440,#15441,#15462));+#15439 = ORIENTED_EDGE('',*,*,#14735,.F.);+#15440 = ORIENTED_EDGE('',*,*,#15176,.T.);+#15441 = ORIENTED_EDGE('',*,*,#15442,.T.);+#15442 = EDGE_CURVE('',#15177,#14790,#15443,.T.);+#15443 = SURFACE_CURVE('',#15444,(#15448,#15455),.PCURVE_S1.);+#15444 = LINE('',#15445,#15446);+#15445 = CARTESIAN_POINT('',(3.653021649751,-2.84,0.704234328342));+#15446 = VECTOR('',#15447,1.);+#15447 = DIRECTION('',(0.,1.,0.));+#15448 = PCURVE('',#14751,#15449);+#15449 = DEFINITIONAL_REPRESENTATION('',(#15450),#15454);+#15450 = LINE('',#15451,#15452);+#15451 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#15452 = VECTOR('',#15453,1.);+#15453 = DIRECTION('',(-0.,1.));+#15454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15455 = PCURVE('',#14829,#15456);+#15456 = DEFINITIONAL_REPRESENTATION('',(#15457),#15461);+#15457 = LINE('',#15458,#15459);+#15458 = CARTESIAN_POINT('',(0.,-9.E-02));+#15459 = VECTOR('',#15460,1.);+#15460 = DIRECTION('',(0.,1.));+#15461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15462 = ORIENTED_EDGE('',*,*,#14789,.F.);+#15463 = ADVANCED_FACE('',(#15464),#15089,.T.);+#15464 = FACE_BOUND('',#15465,.T.);+#15465 = EDGE_LOOP('',(#15466,#15467,#15488,#15489));+#15466 = ORIENTED_EDGE('',*,*,#15068,.T.);+#15467 = ORIENTED_EDGE('',*,*,#15468,.T.);+#15468 = EDGE_CURVE('',#15041,#15388,#15469,.T.);+#15469 = SURFACE_CURVE('',#15470,(#15474,#15481),.PCURVE_S1.);+#15470 = LINE('',#15471,#15472);+#15471 = CARTESIAN_POINT('',(3.25,-2.66,0.6775));+#15472 = VECTOR('',#15473,1.);+#15473 = DIRECTION('',(0.,-1.,0.));+#15474 = PCURVE('',#15089,#15475);+#15475 = DEFINITIONAL_REPRESENTATION('',(#15476),#15480);+#15476 = LINE('',#15477,#15478);+#15477 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#15478 = VECTOR('',#15479,1.);+#15479 = DIRECTION('',(-0.,-1.));+#15480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15481 = PCURVE('',#15056,#15482);+#15482 = DEFINITIONAL_REPRESENTATION('',(#15483),#15487);+#15483 = LINE('',#15484,#15485);+#15484 = CARTESIAN_POINT('',(0.,9.E-02));+#15485 = VECTOR('',#15486,1.);+#15486 = DIRECTION('',(0.,-1.));+#15487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15488 = ORIENTED_EDGE('',*,*,#15410,.F.);+#15489 = ORIENTED_EDGE('',*,*,#15149,.T.);+#15490 = ADVANCED_FACE('',(#15491),#15056,.F.);+#15491 = FACE_BOUND('',#15492,.F.);+#15492 = EDGE_LOOP('',(#15493,#15494,#15515,#15516));+#15493 = ORIENTED_EDGE('',*,*,#15387,.T.);+#15494 = ORIENTED_EDGE('',*,*,#15495,.F.);+#15495 = EDGE_CURVE('',#15012,#15364,#15496,.T.);+#15496 = SURFACE_CURVE('',#15497,(#15501,#15508),.PCURVE_S1.);+#15497 = LINE('',#15498,#15499);+#15498 = CARTESIAN_POINT('',(3.52308092439,-2.66,0.6775));+#15499 = VECTOR('',#15500,1.);+#15500 = DIRECTION('',(0.,-1.,0.));+#15501 = PCURVE('',#15056,#15502);+#15502 = DEFINITIONAL_REPRESENTATION('',(#15503),#15507);+#15503 = LINE('',#15504,#15505);+#15504 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#15505 = VECTOR('',#15506,1.);+#15506 = DIRECTION('',(0.,-1.));+#15507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15508 = PCURVE('',#15028,#15509);+#15509 = DEFINITIONAL_REPRESENTATION('',(#15510),#15514);+#15510 = LINE('',#15511,#15512);+#15511 = CARTESIAN_POINT('',(0.,9.E-02));+#15512 = VECTOR('',#15513,1.);+#15513 = DIRECTION('',(0.,-1.));+#15514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15515 = ORIENTED_EDGE('',*,*,#15040,.F.);+#15516 = ORIENTED_EDGE('',*,*,#15468,.T.);+#15517 = ADVANCED_FACE('',(#15518),#15028,.F.);+#15518 = FACE_BOUND('',#15519,.F.);+#15519 = EDGE_LOOP('',(#15520,#15521,#15542,#15543));+#15520 = ORIENTED_EDGE('',*,*,#15363,.T.);+#15521 = ORIENTED_EDGE('',*,*,#15522,.F.);+#15522 = EDGE_CURVE('',#14984,#15341,#15523,.T.);+#15523 = SURFACE_CURVE('',#15524,(#15528,#15535),.PCURVE_S1.);+#15524 = LINE('',#15525,#15526);+#15525 = CARTESIAN_POINT('',(3.560206845921,-2.66,0.655138379526));+#15526 = VECTOR('',#15527,1.);+#15527 = DIRECTION('',(0.,-1.,0.));+#15528 = PCURVE('',#15028,#15529);+#15529 = DEFINITIONAL_REPRESENTATION('',(#15530),#15534);+#15530 = LINE('',#15531,#15532);+#15531 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#15532 = VECTOR('',#15533,1.);+#15533 = DIRECTION('',(0.,-1.));+#15534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15535 = PCURVE('',#14999,#15536);+#15536 = DEFINITIONAL_REPRESENTATION('',(#15537),#15541);+#15537 = LINE('',#15538,#15539);+#15538 = CARTESIAN_POINT('',(0.,9.E-02));+#15539 = VECTOR('',#15540,1.);+#15540 = DIRECTION('',(0.,-1.));+#15541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15542 = ORIENTED_EDGE('',*,*,#15011,.F.);+#15543 = ORIENTED_EDGE('',*,*,#15495,.T.);+#15544 = ADVANCED_FACE('',(#15545),#14999,.F.);+#15545 = FACE_BOUND('',#15546,.F.);+#15546 = EDGE_LOOP('',(#15547,#15548,#15569,#15570));+#15547 = ORIENTED_EDGE('',*,*,#15340,.T.);+#15548 = ORIENTED_EDGE('',*,*,#15549,.F.);+#15549 = EDGE_CURVE('',#14955,#15317,#15550,.T.);+#15550 = SURFACE_CURVE('',#15551,(#15555,#15562),.PCURVE_S1.);+#15551 = LINE('',#15552,#15553);+#15552 = CARTESIAN_POINT('',(3.865353350249,-2.66,7.826567165848E-02));+#15553 = VECTOR('',#15554,1.);+#15554 = DIRECTION('',(0.,-1.,0.));+#15555 = PCURVE('',#14999,#15556);+#15556 = DEFINITIONAL_REPRESENTATION('',(#15557),#15561);+#15557 = LINE('',#15558,#15559);+#15558 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#15559 = VECTOR('',#15560,1.);+#15560 = DIRECTION('',(0.,-1.));+#15561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15562 = PCURVE('',#14971,#15563);+#15563 = DEFINITIONAL_REPRESENTATION('',(#15564),#15568);+#15564 = LINE('',#15565,#15566);+#15565 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#15566 = VECTOR('',#15567,1.);+#15567 = DIRECTION('',(0.,-1.));+#15568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15569 = ORIENTED_EDGE('',*,*,#14983,.F.);+#15570 = ORIENTED_EDGE('',*,*,#15522,.T.);+#15571 = ADVANCED_FACE('',(#15572),#14971,.T.);+#15572 = FACE_BOUND('',#15573,.T.);+#15573 = EDGE_LOOP('',(#15574,#15575,#15576,#15577));+#15574 = ORIENTED_EDGE('',*,*,#15316,.T.);+#15575 = ORIENTED_EDGE('',*,*,#15549,.F.);+#15576 = ORIENTED_EDGE('',*,*,#14954,.F.);+#15577 = ORIENTED_EDGE('',*,*,#15578,.T.);+#15578 = EDGE_CURVE('',#14927,#15294,#15579,.T.);+#15579 = SURFACE_CURVE('',#15580,(#15584,#15591),.PCURVE_S1.);+#15580 = LINE('',#15581,#15582);+#15581 = CARTESIAN_POINT('',(3.99529407561,-2.66,0.));+#15582 = VECTOR('',#15583,1.);+#15583 = DIRECTION('',(0.,-1.,0.));+#15584 = PCURVE('',#14971,#15585);+#15585 = DEFINITIONAL_REPRESENTATION('',(#15586),#15590);+#15586 = LINE('',#15587,#15588);+#15587 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#15588 = VECTOR('',#15589,1.);+#15589 = DIRECTION('',(0.,-1.));+#15590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15591 = PCURVE('',#14942,#15592);+#15592 = DEFINITIONAL_REPRESENTATION('',(#15593),#15597);+#15593 = LINE('',#15594,#15595);+#15594 = CARTESIAN_POINT('',(0.,9.E-02));+#15595 = VECTOR('',#15596,1.);+#15596 = DIRECTION('',(0.,-1.));+#15597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15598 = ADVANCED_FACE('',(#15599),#14942,.F.);+#15599 = FACE_BOUND('',#15600,.F.);+#15600 = EDGE_LOOP('',(#15601,#15602,#15603,#15624));+#15601 = ORIENTED_EDGE('',*,*,#15578,.T.);+#15602 = ORIENTED_EDGE('',*,*,#15293,.T.);+#15603 = ORIENTED_EDGE('',*,*,#15604,.T.);+#15604 = EDGE_CURVE('',#15271,#14899,#15605,.T.);+#15605 = SURFACE_CURVE('',#15606,(#15610,#15617),.PCURVE_S1.);+#15606 = LINE('',#15607,#15608);+#15607 = CARTESIAN_POINT('',(4.43,-3.045,0.));+#15608 = VECTOR('',#15609,1.);+#15609 = DIRECTION('',(0.,1.,0.));+#15610 = PCURVE('',#14942,#15611);+#15611 = DEFINITIONAL_REPRESENTATION('',(#15612),#15616);+#15612 = LINE('',#15613,#15614);+#15613 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#15614 = VECTOR('',#15615,1.);+#15615 = DIRECTION('',(0.,1.));+#15616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15617 = PCURVE('',#14914,#15618);+#15618 = DEFINITIONAL_REPRESENTATION('',(#15619),#15623);+#15619 = LINE('',#15620,#15621);+#15620 = CARTESIAN_POINT('',(0.5,-0.295));+#15621 = VECTOR('',#15622,1.);+#15622 = DIRECTION('',(0.,-1.));+#15623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15624 = ORIENTED_EDGE('',*,*,#14926,.F.);+#15625 = ADVANCED_FACE('',(#15626),#14914,.T.);+#15626 = FACE_BOUND('',#15627,.T.);+#15627 = EDGE_LOOP('',(#15628,#15629,#15650,#15651));+#15628 = ORIENTED_EDGE('',*,*,#14898,.F.);+#15629 = ORIENTED_EDGE('',*,*,#15630,.F.);+#15630 = EDGE_CURVE('',#15248,#14871,#15631,.T.);+#15631 = SURFACE_CURVE('',#15632,(#15636,#15643),.PCURVE_S1.);+#15632 = LINE('',#15633,#15634);+#15633 = CARTESIAN_POINT('',(4.43,-3.045,0.105));+#15634 = VECTOR('',#15635,1.);+#15635 = DIRECTION('',(0.,1.,0.));+#15636 = PCURVE('',#14914,#15637);+#15637 = DEFINITIONAL_REPRESENTATION('',(#15638),#15642);+#15638 = LINE('',#15639,#15640);+#15639 = CARTESIAN_POINT('',(0.605,-0.295));+#15640 = VECTOR('',#15641,1.);+#15641 = DIRECTION('',(0.,-1.));+#15642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15643 = PCURVE('',#14886,#15644);+#15644 = DEFINITIONAL_REPRESENTATION('',(#15645),#15649);+#15645 = LINE('',#15646,#15647);+#15646 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#15647 = VECTOR('',#15648,1.);+#15648 = DIRECTION('',(0.,1.));+#15649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15650 = ORIENTED_EDGE('',*,*,#15270,.T.);+#15651 = ORIENTED_EDGE('',*,*,#15604,.T.);+#15652 = ADVANCED_FACE('',(#15653),#14886,.T.);+#15653 = FACE_BOUND('',#15654,.T.);+#15654 = EDGE_LOOP('',(#15655,#15676,#15677,#15678));+#15655 = ORIENTED_EDGE('',*,*,#15656,.T.);+#15656 = EDGE_CURVE('',#14842,#15224,#15657,.T.);+#15657 = SURFACE_CURVE('',#15658,(#15662,#15669),.PCURVE_S1.);+#15658 = LINE('',#15659,#15660);+#15659 = CARTESIAN_POINT('',(3.99529407561,-2.66,0.105));+#15660 = VECTOR('',#15661,1.);+#15661 = DIRECTION('',(0.,-1.,0.));+#15662 = PCURVE('',#14886,#15663);+#15663 = DEFINITIONAL_REPRESENTATION('',(#15664),#15668);+#15664 = LINE('',#15665,#15666);+#15665 = CARTESIAN_POINT('',(0.,9.E-02));+#15666 = VECTOR('',#15667,1.);+#15667 = DIRECTION('',(0.,-1.));+#15668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15669 = PCURVE('',#14858,#15670);+#15670 = DEFINITIONAL_REPRESENTATION('',(#15671),#15675);+#15671 = LINE('',#15672,#15673);+#15672 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#15673 = VECTOR('',#15674,1.);+#15674 = DIRECTION('',(0.,-1.));+#15675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15676 = ORIENTED_EDGE('',*,*,#15247,.T.);+#15677 = ORIENTED_EDGE('',*,*,#15630,.T.);+#15678 = ORIENTED_EDGE('',*,*,#14870,.F.);+#15679 = ADVANCED_FACE('',(#15680),#14858,.F.);+#15680 = FACE_BOUND('',#15681,.F.);+#15681 = EDGE_LOOP('',(#15682,#15683,#15704,#15705));+#15682 = ORIENTED_EDGE('',*,*,#15223,.T.);+#15683 = ORIENTED_EDGE('',*,*,#15684,.F.);+#15684 = EDGE_CURVE('',#14814,#15201,#15685,.T.);+#15685 = SURFACE_CURVE('',#15686,(#15690,#15697),.PCURVE_S1.);+#15686 = LINE('',#15687,#15688);+#15687 = CARTESIAN_POINT('',(3.958168154079,-2.66,0.127361620474));+#15688 = VECTOR('',#15689,1.);+#15689 = DIRECTION('',(0.,-1.,0.));+#15690 = PCURVE('',#14858,#15691);+#15691 = DEFINITIONAL_REPRESENTATION('',(#15692),#15696);+#15692 = LINE('',#15693,#15694);+#15693 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#15694 = VECTOR('',#15695,1.);+#15695 = DIRECTION('',(0.,-1.));+#15696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15697 = PCURVE('',#14829,#15698);+#15698 = DEFINITIONAL_REPRESENTATION('',(#15699),#15703);+#15699 = LINE('',#15700,#15701);+#15700 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#15701 = VECTOR('',#15702,1.);+#15702 = DIRECTION('',(0.,-1.));+#15703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15704 = ORIENTED_EDGE('',*,*,#14841,.F.);+#15705 = ORIENTED_EDGE('',*,*,#15656,.T.);+#15706 = ADVANCED_FACE('',(#15707),#14829,.T.);+#15707 = FACE_BOUND('',#15708,.T.);+#15708 = EDGE_LOOP('',(#15709,#15710,#15711,#15712));+#15709 = ORIENTED_EDGE('',*,*,#15442,.F.);+#15710 = ORIENTED_EDGE('',*,*,#15200,.T.);+#15711 = ORIENTED_EDGE('',*,*,#15684,.F.);+#15712 = ORIENTED_EDGE('',*,*,#14813,.F.);+#15713 = MANIFOLD_SOLID_BREP('',#15714);+#15714 = CLOSED_SHELL('',(#15715,#15845,#15921,#16259,#16308,#16574,+ #16601,#16628,#16655,#16682,#16709,#16736,#16763,#16790,#16817,+ #16844));+#15715 = ADVANCED_FACE('',(#15716),#15731,.T.);+#15716 = FACE_BOUND('',#15717,.T.);+#15717 = EDGE_LOOP('',(#15718,#15758,#15786,#15819));+#15718 = ORIENTED_EDGE('',*,*,#15719,.T.);+#15719 = EDGE_CURVE('',#15720,#15722,#15724,.T.);+#15720 = VERTEX_POINT('',#15721);+#15721 = CARTESIAN_POINT('',(3.25,-2.16,0.7825));+#15722 = VERTEX_POINT('',#15723);+#15723 = CARTESIAN_POINT('',(3.2,-2.16,0.746007810594));+#15724 = SURFACE_CURVE('',#15725,(#15730,#15742),.PCURVE_S1.);+#15725 = CIRCLE('',#15726,5.25E-02);+#15726 = AXIS2_PLACEMENT_3D('',#15727,#15728,#15729);+#15727 = CARTESIAN_POINT('',(3.25,-2.16,0.73));+#15728 = DIRECTION('',(0.,-1.,0.));+#15729 = DIRECTION('',(1.,0.,0.));+#15730 = PCURVE('',#15731,#15736);+#15731 = CYLINDRICAL_SURFACE('',#15732,5.25E-02);+#15732 = AXIS2_PLACEMENT_3D('',#15733,#15734,#15735);+#15733 = CARTESIAN_POINT('',(3.25,-2.25,0.73));+#15734 = DIRECTION('',(0.,1.,0.));+#15735 = DIRECTION('',(1.,0.,0.));+#15736 = DEFINITIONAL_REPRESENTATION('',(#15737),#15741);+#15737 = LINE('',#15738,#15739);+#15738 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#15739 = VECTOR('',#15740,1.);+#15740 = DIRECTION('',(-1.,-0.));+#15741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15742 = PCURVE('',#15743,#15748);+#15743 = PLANE('',#15744);+#15744 = AXIS2_PLACEMENT_3D('',#15745,#15746,#15747);+#15745 = CARTESIAN_POINT('',(3.861815252728,-2.16,0.337140815196));+#15746 = DIRECTION('',(0.,1.,0.));+#15747 = DIRECTION('',(0.,0.,1.));+#15748 = DEFINITIONAL_REPRESENTATION('',(#15749),#15757);+#15749 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15750,#15751,#15752,#15753+ ,#15754,#15755,#15756),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15750 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#15751 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#15752 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#15753 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#15754 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#15755 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#15756 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#15757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15758 = ORIENTED_EDGE('',*,*,#15759,.F.);+#15759 = EDGE_CURVE('',#15760,#15722,#15762,.T.);+#15760 = VERTEX_POINT('',#15761);+#15761 = CARTESIAN_POINT('',(3.2,-2.34,0.746007810594));+#15762 = SURFACE_CURVE('',#15763,(#15767,#15774),.PCURVE_S1.);+#15763 = LINE('',#15764,#15765);+#15764 = CARTESIAN_POINT('',(3.2,-2.25,0.746007810594));+#15765 = VECTOR('',#15766,1.);+#15766 = DIRECTION('',(0.,1.,0.));+#15767 = PCURVE('',#15731,#15768);+#15768 = DEFINITIONAL_REPRESENTATION('',(#15769),#15773);+#15769 = LINE('',#15770,#15771);+#15770 = CARTESIAN_POINT('',(3.451437293332,0.));+#15771 = VECTOR('',#15772,1.);+#15772 = DIRECTION('',(-0.,1.));+#15773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15774 = PCURVE('',#15775,#15780);+#15775 = PLANE('',#15776);+#15776 = AXIS2_PLACEMENT_3D('',#15777,#15778,#15779);+#15777 = CARTESIAN_POINT('',(3.2,-2.84,-0.5));+#15778 = DIRECTION('',(1.,0.,0.));+#15779 = DIRECTION('',(0.,0.,1.));+#15780 = DEFINITIONAL_REPRESENTATION('',(#15781),#15785);+#15781 = LINE('',#15782,#15783);+#15782 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#15783 = VECTOR('',#15784,1.);+#15784 = DIRECTION('',(0.,-1.));+#15785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15786 = ORIENTED_EDGE('',*,*,#15787,.F.);+#15787 = EDGE_CURVE('',#15788,#15760,#15790,.T.);+#15788 = VERTEX_POINT('',#15789);+#15789 = CARTESIAN_POINT('',(3.25,-2.34,0.7825));+#15790 = SURFACE_CURVE('',#15791,(#15796,#15803),.PCURVE_S1.);+#15791 = CIRCLE('',#15792,5.25E-02);+#15792 = AXIS2_PLACEMENT_3D('',#15793,#15794,#15795);+#15793 = CARTESIAN_POINT('',(3.25,-2.34,0.73));+#15794 = DIRECTION('',(0.,-1.,0.));+#15795 = DIRECTION('',(1.,0.,0.));+#15796 = PCURVE('',#15731,#15797);+#15797 = DEFINITIONAL_REPRESENTATION('',(#15798),#15802);+#15798 = LINE('',#15799,#15800);+#15799 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#15800 = VECTOR('',#15801,1.);+#15801 = DIRECTION('',(-1.,0.));+#15802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15803 = PCURVE('',#15804,#15809);+#15804 = PLANE('',#15805);+#15805 = AXIS2_PLACEMENT_3D('',#15806,#15807,#15808);+#15806 = CARTESIAN_POINT('',(3.861815252728,-2.34,0.337140815196));+#15807 = DIRECTION('',(0.,1.,0.));+#15808 = DIRECTION('',(0.,0.,1.));+#15809 = DEFINITIONAL_REPRESENTATION('',(#15810),#15818);+#15810 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15811,#15812,#15813,#15814+ ,#15815,#15816,#15817),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#15811 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#15812 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#15813 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#15814 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#15815 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#15816 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#15817 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#15818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15819 = ORIENTED_EDGE('',*,*,#15820,.T.);+#15820 = EDGE_CURVE('',#15788,#15720,#15821,.T.);+#15821 = SURFACE_CURVE('',#15822,(#15826,#15833),.PCURVE_S1.);+#15822 = LINE('',#15823,#15824);+#15823 = CARTESIAN_POINT('',(3.25,-2.34,0.7825));+#15824 = VECTOR('',#15825,1.);+#15825 = DIRECTION('',(0.,1.,0.));+#15826 = PCURVE('',#15731,#15827);+#15827 = DEFINITIONAL_REPRESENTATION('',(#15828),#15832);+#15828 = LINE('',#15829,#15830);+#15829 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#15830 = VECTOR('',#15831,1.);+#15831 = DIRECTION('',(0.,1.));+#15832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15833 = PCURVE('',#15834,#15839);+#15834 = PLANE('',#15835);+#15835 = AXIS2_PLACEMENT_3D('',#15836,#15837,#15838);+#15836 = CARTESIAN_POINT('',(3.25,-2.25,0.7825));+#15837 = DIRECTION('',(0.,0.,1.));+#15838 = DIRECTION('',(1.,0.,0.));+#15839 = DEFINITIONAL_REPRESENTATION('',(#15840),#15844);+#15840 = LINE('',#15841,#15842);+#15841 = CARTESIAN_POINT('',(0.,-9.E-02));+#15842 = VECTOR('',#15843,1.);+#15843 = DIRECTION('',(0.,1.));+#15844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15845 = ADVANCED_FACE('',(#15846),#15834,.T.);+#15846 = FACE_BOUND('',#15847,.T.);+#15847 = EDGE_LOOP('',(#15848,#15849,#15872,#15900));+#15848 = ORIENTED_EDGE('',*,*,#15820,.F.);+#15849 = ORIENTED_EDGE('',*,*,#15850,.T.);+#15850 = EDGE_CURVE('',#15788,#15851,#15853,.T.);+#15851 = VERTEX_POINT('',#15852);+#15852 = CARTESIAN_POINT('',(3.52308092439,-2.34,0.7825));+#15853 = SURFACE_CURVE('',#15854,(#15858,#15865),.PCURVE_S1.);+#15854 = LINE('',#15855,#15856);+#15855 = CARTESIAN_POINT('',(3.25,-2.34,0.7825));+#15856 = VECTOR('',#15857,1.);+#15857 = DIRECTION('',(1.,0.,0.));+#15858 = PCURVE('',#15834,#15859);+#15859 = DEFINITIONAL_REPRESENTATION('',(#15860),#15864);+#15860 = LINE('',#15861,#15862);+#15861 = CARTESIAN_POINT('',(0.,-9.E-02));+#15862 = VECTOR('',#15863,1.);+#15863 = DIRECTION('',(1.,0.));+#15864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15865 = PCURVE('',#15804,#15866);+#15866 = DEFINITIONAL_REPRESENTATION('',(#15867),#15871);+#15867 = LINE('',#15868,#15869);+#15868 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#15869 = VECTOR('',#15870,1.);+#15870 = DIRECTION('',(0.,1.));+#15871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15872 = ORIENTED_EDGE('',*,*,#15873,.T.);+#15873 = EDGE_CURVE('',#15851,#15874,#15876,.T.);+#15874 = VERTEX_POINT('',#15875);+#15875 = CARTESIAN_POINT('',(3.52308092439,-2.16,0.7825));+#15876 = SURFACE_CURVE('',#15877,(#15881,#15888),.PCURVE_S1.);+#15877 = LINE('',#15878,#15879);+#15878 = CARTESIAN_POINT('',(3.52308092439,-2.34,0.7825));+#15879 = VECTOR('',#15880,1.);+#15880 = DIRECTION('',(0.,1.,0.));+#15881 = PCURVE('',#15834,#15882);+#15882 = DEFINITIONAL_REPRESENTATION('',(#15883),#15887);+#15883 = LINE('',#15884,#15885);+#15884 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#15885 = VECTOR('',#15886,1.);+#15886 = DIRECTION('',(0.,1.));+#15887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15888 = PCURVE('',#15889,#15894);+#15889 = CYLINDRICAL_SURFACE('',#15890,0.147);+#15890 = AXIS2_PLACEMENT_3D('',#15891,#15892,#15893);+#15891 = CARTESIAN_POINT('',(3.52308092439,-2.25,0.6355));+#15892 = DIRECTION('',(0.,1.,0.));+#15893 = DIRECTION('',(0.,0.,1.));+#15894 = DEFINITIONAL_REPRESENTATION('',(#15895),#15899);+#15895 = LINE('',#15896,#15897);+#15896 = CARTESIAN_POINT('',(0.,-9.E-02));+#15897 = VECTOR('',#15898,1.);+#15898 = DIRECTION('',(-0.,1.));+#15899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15900 = ORIENTED_EDGE('',*,*,#15901,.F.);+#15901 = EDGE_CURVE('',#15720,#15874,#15902,.T.);+#15902 = SURFACE_CURVE('',#15903,(#15907,#15914),.PCURVE_S1.);+#15903 = LINE('',#15904,#15905);+#15904 = CARTESIAN_POINT('',(3.25,-2.16,0.7825));+#15905 = VECTOR('',#15906,1.);+#15906 = DIRECTION('',(1.,0.,0.));+#15907 = PCURVE('',#15834,#15908);+#15908 = DEFINITIONAL_REPRESENTATION('',(#15909),#15913);+#15909 = LINE('',#15910,#15911);+#15910 = CARTESIAN_POINT('',(0.,9.E-02));+#15911 = VECTOR('',#15912,1.);+#15912 = DIRECTION('',(1.,0.));+#15913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15914 = PCURVE('',#15743,#15915);+#15915 = DEFINITIONAL_REPRESENTATION('',(#15916),#15920);+#15916 = LINE('',#15917,#15918);+#15917 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#15918 = VECTOR('',#15919,1.);+#15919 = DIRECTION('',(0.,1.));+#15920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15921 = ADVANCED_FACE('',(#15922),#15743,.T.);+#15922 = FACE_BOUND('',#15923,.T.);+#15923 = EDGE_LOOP('',(#15924,#15925,#15926,#15950,#15978,#16007,#16035,+ #16063,#16091,#16120,#16148,#16177,#16205,#16238));+#15924 = ORIENTED_EDGE('',*,*,#15719,.F.);+#15925 = ORIENTED_EDGE('',*,*,#15901,.T.);+#15926 = ORIENTED_EDGE('',*,*,#15927,.T.);+#15927 = EDGE_CURVE('',#15874,#15928,#15930,.T.);+#15928 = VERTEX_POINT('',#15929);+#15929 = CARTESIAN_POINT('',(3.653021649751,-2.16,0.704234328342));+#15930 = SURFACE_CURVE('',#15931,(#15936,#15943),.PCURVE_S1.);+#15931 = CIRCLE('',#15932,0.147);+#15932 = AXIS2_PLACEMENT_3D('',#15933,#15934,#15935);+#15933 = CARTESIAN_POINT('',(3.52308092439,-2.16,0.6355));+#15934 = DIRECTION('',(0.,1.,0.));+#15935 = DIRECTION('',(0.,0.,1.));+#15936 = PCURVE('',#15743,#15937);+#15937 = DEFINITIONAL_REPRESENTATION('',(#15938),#15942);+#15938 = CIRCLE('',#15939,0.147);+#15939 = AXIS2_PLACEMENT_2D('',#15940,#15941);+#15940 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#15941 = DIRECTION('',(1.,0.));+#15942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15943 = PCURVE('',#15889,#15944);+#15944 = DEFINITIONAL_REPRESENTATION('',(#15945),#15949);+#15945 = LINE('',#15946,#15947);+#15946 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#15947 = VECTOR('',#15948,1.);+#15948 = DIRECTION('',(1.,-0.));+#15949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15950 = ORIENTED_EDGE('',*,*,#15951,.T.);+#15951 = EDGE_CURVE('',#15928,#15952,#15954,.T.);+#15952 = VERTEX_POINT('',#15953);+#15953 = CARTESIAN_POINT('',(3.958168154079,-2.16,0.127361620474));+#15954 = SURFACE_CURVE('',#15955,(#15959,#15966),.PCURVE_S1.);+#15955 = LINE('',#15956,#15957);+#15956 = CARTESIAN_POINT('',(3.626407401915,-2.16,0.754547974408));+#15957 = VECTOR('',#15958,1.);+#15958 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#15959 = PCURVE('',#15743,#15960);+#15960 = DEFINITIONAL_REPRESENTATION('',(#15961),#15965);+#15961 = LINE('',#15962,#15963);+#15962 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#15963 = VECTOR('',#15964,1.);+#15964 = DIRECTION('',(-0.883950512662,0.467580464908));+#15965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15966 = PCURVE('',#15967,#15972);+#15967 = PLANE('',#15968);+#15968 = AXIS2_PLACEMENT_3D('',#15969,#15970,#15971);+#15969 = CARTESIAN_POINT('',(3.653021649751,-2.25,0.704234328342));+#15970 = DIRECTION('',(0.883950512662,0.,0.467580464908));+#15971 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#15972 = DEFINITIONAL_REPRESENTATION('',(#15973),#15977);+#15973 = LINE('',#15974,#15975);+#15974 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#15975 = VECTOR('',#15976,1.);+#15976 = DIRECTION('',(1.,0.));+#15977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15978 = ORIENTED_EDGE('',*,*,#15979,.F.);+#15979 = EDGE_CURVE('',#15980,#15952,#15982,.T.);+#15980 = VERTEX_POINT('',#15981);+#15981 = CARTESIAN_POINT('',(3.99529407561,-2.16,0.105));+#15982 = SURFACE_CURVE('',#15983,(#15988,#15995),.PCURVE_S1.);+#15983 = CIRCLE('',#15984,4.2E-02);+#15984 = AXIS2_PLACEMENT_3D('',#15985,#15986,#15987);+#15985 = CARTESIAN_POINT('',(3.99529407561,-2.16,0.147));+#15986 = DIRECTION('',(0.,1.,0.));+#15987 = DIRECTION('',(0.,0.,1.));+#15988 = PCURVE('',#15743,#15989);+#15989 = DEFINITIONAL_REPRESENTATION('',(#15990),#15994);+#15990 = CIRCLE('',#15991,4.2E-02);+#15991 = AXIS2_PLACEMENT_2D('',#15992,#15993);+#15992 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#15993 = DIRECTION('',(1.,0.));+#15994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15995 = PCURVE('',#15996,#16001);+#15996 = CYLINDRICAL_SURFACE('',#15997,4.2E-02);+#15997 = AXIS2_PLACEMENT_3D('',#15998,#15999,#16000);+#15998 = CARTESIAN_POINT('',(3.99529407561,-2.25,0.147));+#15999 = DIRECTION('',(0.,1.,0.));+#16000 = DIRECTION('',(0.,0.,1.));+#16001 = DEFINITIONAL_REPRESENTATION('',(#16002),#16006);+#16002 = LINE('',#16003,#16004);+#16003 = CARTESIAN_POINT('',(-0.,9.E-02));+#16004 = VECTOR('',#16005,1.);+#16005 = DIRECTION('',(1.,-0.));+#16006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16007 = ORIENTED_EDGE('',*,*,#16008,.T.);+#16008 = EDGE_CURVE('',#15980,#16009,#16011,.T.);+#16009 = VERTEX_POINT('',#16010);+#16010 = CARTESIAN_POINT('',(4.43,-2.16,0.105));+#16011 = SURFACE_CURVE('',#16012,(#16016,#16023),.PCURVE_S1.);+#16012 = LINE('',#16013,#16014);+#16013 = CARTESIAN_POINT('',(3.938375,-2.16,0.105));+#16014 = VECTOR('',#16015,1.);+#16015 = DIRECTION('',(1.,0.,0.));+#16016 = PCURVE('',#15743,#16017);+#16017 = DEFINITIONAL_REPRESENTATION('',(#16018),#16022);+#16018 = LINE('',#16019,#16020);+#16019 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#16020 = VECTOR('',#16021,1.);+#16021 = DIRECTION('',(0.,1.));+#16022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16023 = PCURVE('',#16024,#16029);+#16024 = PLANE('',#16025);+#16025 = AXIS2_PLACEMENT_3D('',#16026,#16027,#16028);+#16026 = CARTESIAN_POINT('',(3.99529407561,-2.25,0.105));+#16027 = DIRECTION('',(0.,0.,1.));+#16028 = DIRECTION('',(1.,0.,0.));+#16029 = DEFINITIONAL_REPRESENTATION('',(#16030),#16034);+#16030 = LINE('',#16031,#16032);+#16031 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#16032 = VECTOR('',#16033,1.);+#16033 = DIRECTION('',(1.,0.));+#16034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16035 = ORIENTED_EDGE('',*,*,#16036,.T.);+#16036 = EDGE_CURVE('',#16009,#16037,#16039,.T.);+#16037 = VERTEX_POINT('',#16038);+#16038 = CARTESIAN_POINT('',(4.43,-2.16,0.));+#16039 = SURFACE_CURVE('',#16040,(#16044,#16051),.PCURVE_S1.);+#16040 = LINE('',#16041,#16042);+#16041 = CARTESIAN_POINT('',(4.43,-2.16,-8.142959240193E-02));+#16042 = VECTOR('',#16043,1.);+#16043 = DIRECTION('',(0.,0.,-1.));+#16044 = PCURVE('',#15743,#16045);+#16045 = DEFINITIONAL_REPRESENTATION('',(#16046),#16050);+#16046 = LINE('',#16047,#16048);+#16047 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#16048 = VECTOR('',#16049,1.);+#16049 = DIRECTION('',(-1.,0.));+#16050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16051 = PCURVE('',#16052,#16057);+#16052 = PLANE('',#16053);+#16053 = AXIS2_PLACEMENT_3D('',#16054,#16055,#16056);+#16054 = CARTESIAN_POINT('',(4.43,-2.84,-0.5));+#16055 = DIRECTION('',(1.,0.,0.));+#16056 = DIRECTION('',(0.,0.,1.));+#16057 = DEFINITIONAL_REPRESENTATION('',(#16058),#16062);+#16058 = LINE('',#16059,#16060);+#16059 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#16060 = VECTOR('',#16061,1.);+#16061 = DIRECTION('',(-1.,0.));+#16062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16063 = ORIENTED_EDGE('',*,*,#16064,.F.);+#16064 = EDGE_CURVE('',#16065,#16037,#16067,.T.);+#16065 = VERTEX_POINT('',#16066);+#16066 = CARTESIAN_POINT('',(3.99529407561,-2.16,0.));+#16067 = SURFACE_CURVE('',#16068,(#16072,#16079),.PCURVE_S1.);+#16068 = LINE('',#16069,#16070);+#16069 = CARTESIAN_POINT('',(3.938375,-2.16,0.));+#16070 = VECTOR('',#16071,1.);+#16071 = DIRECTION('',(1.,0.,0.));+#16072 = PCURVE('',#15743,#16073);+#16073 = DEFINITIONAL_REPRESENTATION('',(#16074),#16078);+#16074 = LINE('',#16075,#16076);+#16075 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#16076 = VECTOR('',#16077,1.);+#16077 = DIRECTION('',(0.,1.));+#16078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16079 = PCURVE('',#16080,#16085);+#16080 = PLANE('',#16081);+#16081 = AXIS2_PLACEMENT_3D('',#16082,#16083,#16084);+#16082 = CARTESIAN_POINT('',(3.99529407561,-2.25,0.));+#16083 = DIRECTION('',(0.,0.,1.));+#16084 = DIRECTION('',(1.,0.,0.));+#16085 = DEFINITIONAL_REPRESENTATION('',(#16086),#16090);+#16086 = LINE('',#16087,#16088);+#16087 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#16088 = VECTOR('',#16089,1.);+#16089 = DIRECTION('',(1.,0.));+#16090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16091 = ORIENTED_EDGE('',*,*,#16092,.T.);+#16092 = EDGE_CURVE('',#16065,#16093,#16095,.T.);+#16093 = VERTEX_POINT('',#16094);+#16094 = CARTESIAN_POINT('',(3.865353350249,-2.16,7.826567165848E-02));+#16095 = SURFACE_CURVE('',#16096,(#16101,#16108),.PCURVE_S1.);+#16096 = CIRCLE('',#16097,0.147);+#16097 = AXIS2_PLACEMENT_3D('',#16098,#16099,#16100);+#16098 = CARTESIAN_POINT('',(3.99529407561,-2.16,0.147));+#16099 = DIRECTION('',(0.,1.,0.));+#16100 = DIRECTION('',(0.,0.,1.));+#16101 = PCURVE('',#15743,#16102);+#16102 = DEFINITIONAL_REPRESENTATION('',(#16103),#16107);+#16103 = CIRCLE('',#16104,0.147);+#16104 = AXIS2_PLACEMENT_2D('',#16105,#16106);+#16105 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#16106 = DIRECTION('',(1.,0.));+#16107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16108 = PCURVE('',#16109,#16114);+#16109 = CYLINDRICAL_SURFACE('',#16110,0.147);+#16110 = AXIS2_PLACEMENT_3D('',#16111,#16112,#16113);+#16111 = CARTESIAN_POINT('',(3.99529407561,-2.25,0.147));+#16112 = DIRECTION('',(0.,1.,0.));+#16113 = DIRECTION('',(0.,0.,1.));+#16114 = DEFINITIONAL_REPRESENTATION('',(#16115),#16119);+#16115 = LINE('',#16116,#16117);+#16116 = CARTESIAN_POINT('',(-0.,9.E-02));+#16117 = VECTOR('',#16118,1.);+#16118 = DIRECTION('',(1.,-0.));+#16119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16120 = ORIENTED_EDGE('',*,*,#16121,.F.);+#16121 = EDGE_CURVE('',#16122,#16093,#16124,.T.);+#16122 = VERTEX_POINT('',#16123);+#16123 = CARTESIAN_POINT('',(3.560206845921,-2.16,0.655138379526));+#16124 = SURFACE_CURVE('',#16125,(#16129,#16136),.PCURVE_S1.);+#16125 = LINE('',#16126,#16127);+#16126 = CARTESIAN_POINT('',(3.533592598085,-2.16,0.705452025592));+#16127 = VECTOR('',#16128,1.);+#16128 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#16129 = PCURVE('',#15743,#16130);+#16130 = DEFINITIONAL_REPRESENTATION('',(#16131),#16135);+#16131 = LINE('',#16132,#16133);+#16132 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#16133 = VECTOR('',#16134,1.);+#16134 = DIRECTION('',(-0.883950512662,0.467580464908));+#16135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16136 = PCURVE('',#16137,#16142);+#16137 = PLANE('',#16138);+#16138 = AXIS2_PLACEMENT_3D('',#16139,#16140,#16141);+#16139 = CARTESIAN_POINT('',(3.560206845921,-2.25,0.655138379526));+#16140 = DIRECTION('',(0.883950512662,0.,0.467580464908));+#16141 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#16142 = DEFINITIONAL_REPRESENTATION('',(#16143),#16147);+#16143 = LINE('',#16144,#16145);+#16144 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#16145 = VECTOR('',#16146,1.);+#16146 = DIRECTION('',(1.,0.));+#16147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16148 = ORIENTED_EDGE('',*,*,#16149,.F.);+#16149 = EDGE_CURVE('',#16150,#16122,#16152,.T.);+#16150 = VERTEX_POINT('',#16151);+#16151 = CARTESIAN_POINT('',(3.52308092439,-2.16,0.6775));+#16152 = SURFACE_CURVE('',#16153,(#16158,#16165),.PCURVE_S1.);+#16153 = CIRCLE('',#16154,4.2E-02);+#16154 = AXIS2_PLACEMENT_3D('',#16155,#16156,#16157);+#16155 = CARTESIAN_POINT('',(3.52308092439,-2.16,0.6355));+#16156 = DIRECTION('',(0.,1.,0.));+#16157 = DIRECTION('',(0.,0.,1.));+#16158 = PCURVE('',#15743,#16159);+#16159 = DEFINITIONAL_REPRESENTATION('',(#16160),#16164);+#16160 = CIRCLE('',#16161,4.2E-02);+#16161 = AXIS2_PLACEMENT_2D('',#16162,#16163);+#16162 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#16163 = DIRECTION('',(1.,0.));+#16164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16165 = PCURVE('',#16166,#16171);+#16166 = CYLINDRICAL_SURFACE('',#16167,4.2E-02);+#16167 = AXIS2_PLACEMENT_3D('',#16168,#16169,#16170);+#16168 = CARTESIAN_POINT('',(3.52308092439,-2.25,0.6355));+#16169 = DIRECTION('',(0.,1.,0.));+#16170 = DIRECTION('',(0.,0.,1.));+#16171 = DEFINITIONAL_REPRESENTATION('',(#16172),#16176);+#16172 = LINE('',#16173,#16174);+#16173 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#16174 = VECTOR('',#16175,1.);+#16175 = DIRECTION('',(1.,-0.));+#16176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16177 = ORIENTED_EDGE('',*,*,#16178,.F.);+#16178 = EDGE_CURVE('',#16179,#16150,#16181,.T.);+#16179 = VERTEX_POINT('',#16180);+#16180 = CARTESIAN_POINT('',(3.25,-2.16,0.6775));+#16181 = SURFACE_CURVE('',#16182,(#16186,#16193),.PCURVE_S1.);+#16182 = LINE('',#16183,#16184);+#16183 = CARTESIAN_POINT('',(3.25,-2.16,0.6775));+#16184 = VECTOR('',#16185,1.);+#16185 = DIRECTION('',(1.,0.,0.));+#16186 = PCURVE('',#15743,#16187);+#16187 = DEFINITIONAL_REPRESENTATION('',(#16188),#16192);+#16188 = LINE('',#16189,#16190);+#16189 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#16190 = VECTOR('',#16191,1.);+#16191 = DIRECTION('',(0.,1.));+#16192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16193 = PCURVE('',#16194,#16199);+#16194 = PLANE('',#16195);+#16195 = AXIS2_PLACEMENT_3D('',#16196,#16197,#16198);+#16196 = CARTESIAN_POINT('',(3.25,-2.25,0.6775));+#16197 = DIRECTION('',(0.,0.,1.));+#16198 = DIRECTION('',(1.,0.,0.));+#16199 = DEFINITIONAL_REPRESENTATION('',(#16200),#16204);+#16200 = LINE('',#16201,#16202);+#16201 = CARTESIAN_POINT('',(0.,9.E-02));+#16202 = VECTOR('',#16203,1.);+#16203 = DIRECTION('',(1.,0.));+#16204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16205 = ORIENTED_EDGE('',*,*,#16206,.F.);+#16206 = EDGE_CURVE('',#16207,#16179,#16209,.T.);+#16207 = VERTEX_POINT('',#16208);+#16208 = CARTESIAN_POINT('',(3.2,-2.16,0.713992189406));+#16209 = SURFACE_CURVE('',#16210,(#16215,#16226),.PCURVE_S1.);+#16210 = CIRCLE('',#16211,5.25E-02);+#16211 = AXIS2_PLACEMENT_3D('',#16212,#16213,#16214);+#16212 = CARTESIAN_POINT('',(3.25,-2.16,0.73));+#16213 = DIRECTION('',(0.,-1.,0.));+#16214 = DIRECTION('',(1.,0.,0.));+#16215 = PCURVE('',#15743,#16216);+#16216 = DEFINITIONAL_REPRESENTATION('',(#16217),#16225);+#16217 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16218,#16219,#16220,#16221+ ,#16222,#16223,#16224),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16218 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#16219 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#16220 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#16221 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#16222 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#16223 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#16224 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#16225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16226 = PCURVE('',#16227,#16232);+#16227 = CYLINDRICAL_SURFACE('',#16228,5.25E-02);+#16228 = AXIS2_PLACEMENT_3D('',#16229,#16230,#16231);+#16229 = CARTESIAN_POINT('',(3.25,-2.25,0.73));+#16230 = DIRECTION('',(0.,1.,0.));+#16231 = DIRECTION('',(1.,0.,0.));+#16232 = DEFINITIONAL_REPRESENTATION('',(#16233),#16237);+#16233 = LINE('',#16234,#16235);+#16234 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#16235 = VECTOR('',#16236,1.);+#16236 = DIRECTION('',(-1.,-0.));+#16237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16238 = ORIENTED_EDGE('',*,*,#16239,.F.);+#16239 = EDGE_CURVE('',#15722,#16207,#16240,.T.);+#16240 = SURFACE_CURVE('',#16241,(#16245,#16252),.PCURVE_S1.);+#16241 = LINE('',#16242,#16243);+#16242 = CARTESIAN_POINT('',(3.2,-2.16,-8.142959240193E-02));+#16243 = VECTOR('',#16244,1.);+#16244 = DIRECTION('',(0.,0.,-1.));+#16245 = PCURVE('',#15743,#16246);+#16246 = DEFINITIONAL_REPRESENTATION('',(#16247),#16251);+#16247 = LINE('',#16248,#16249);+#16248 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#16249 = VECTOR('',#16250,1.);+#16250 = DIRECTION('',(-1.,0.));+#16251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16252 = PCURVE('',#15775,#16253);+#16253 = DEFINITIONAL_REPRESENTATION('',(#16254),#16258);+#16254 = LINE('',#16255,#16256);+#16255 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#16256 = VECTOR('',#16257,1.);+#16257 = DIRECTION('',(-1.,0.));+#16258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16259 = ADVANCED_FACE('',(#16260),#15775,.F.);+#16260 = FACE_BOUND('',#16261,.F.);+#16261 = EDGE_LOOP('',(#16262,#16263,#16286,#16307));+#16262 = ORIENTED_EDGE('',*,*,#15759,.F.);+#16263 = ORIENTED_EDGE('',*,*,#16264,.T.);+#16264 = EDGE_CURVE('',#15760,#16265,#16267,.T.);+#16265 = VERTEX_POINT('',#16266);+#16266 = CARTESIAN_POINT('',(3.2,-2.34,0.713992189406));+#16267 = SURFACE_CURVE('',#16268,(#16272,#16279),.PCURVE_S1.);+#16268 = LINE('',#16269,#16270);+#16269 = CARTESIAN_POINT('',(3.2,-2.34,-8.142959240193E-02));+#16270 = VECTOR('',#16271,1.);+#16271 = DIRECTION('',(0.,0.,-1.));+#16272 = PCURVE('',#15775,#16273);+#16273 = DEFINITIONAL_REPRESENTATION('',(#16274),#16278);+#16274 = LINE('',#16275,#16276);+#16275 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#16276 = VECTOR('',#16277,1.);+#16277 = DIRECTION('',(-1.,0.));+#16278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16279 = PCURVE('',#15804,#16280);+#16280 = DEFINITIONAL_REPRESENTATION('',(#16281),#16285);+#16281 = LINE('',#16282,#16283);+#16282 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#16283 = VECTOR('',#16284,1.);+#16284 = DIRECTION('',(-1.,0.));+#16285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16286 = ORIENTED_EDGE('',*,*,#16287,.T.);+#16287 = EDGE_CURVE('',#16265,#16207,#16288,.T.);+#16288 = SURFACE_CURVE('',#16289,(#16293,#16300),.PCURVE_S1.);+#16289 = LINE('',#16290,#16291);+#16290 = CARTESIAN_POINT('',(3.2,-2.25,0.713992189406));+#16291 = VECTOR('',#16292,1.);+#16292 = DIRECTION('',(0.,1.,0.));+#16293 = PCURVE('',#15775,#16294);+#16294 = DEFINITIONAL_REPRESENTATION('',(#16295),#16299);+#16295 = LINE('',#16296,#16297);+#16296 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#16297 = VECTOR('',#16298,1.);+#16298 = DIRECTION('',(0.,-1.));+#16299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16300 = PCURVE('',#16227,#16301);+#16301 = DEFINITIONAL_REPRESENTATION('',(#16302),#16306);+#16302 = LINE('',#16303,#16304);+#16303 = CARTESIAN_POINT('',(2.831748013849,0.));+#16304 = VECTOR('',#16305,1.);+#16305 = DIRECTION('',(-0.,1.));+#16306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16307 = ORIENTED_EDGE('',*,*,#16239,.F.);+#16308 = ADVANCED_FACE('',(#16309),#15804,.F.);+#16309 = FACE_BOUND('',#16310,.F.);+#16310 = EDGE_LOOP('',(#16311,#16312,#16313,#16337,#16360,#16384,#16407,+ #16430,#16453,#16477,#16500,#16524,#16547,#16573));+#16311 = ORIENTED_EDGE('',*,*,#15787,.F.);+#16312 = ORIENTED_EDGE('',*,*,#15850,.T.);+#16313 = ORIENTED_EDGE('',*,*,#16314,.T.);+#16314 = EDGE_CURVE('',#15851,#16315,#16317,.T.);+#16315 = VERTEX_POINT('',#16316);+#16316 = CARTESIAN_POINT('',(3.653021649751,-2.34,0.704234328342));+#16317 = SURFACE_CURVE('',#16318,(#16323,#16330),.PCURVE_S1.);+#16318 = CIRCLE('',#16319,0.147);+#16319 = AXIS2_PLACEMENT_3D('',#16320,#16321,#16322);+#16320 = CARTESIAN_POINT('',(3.52308092439,-2.34,0.6355));+#16321 = DIRECTION('',(0.,1.,0.));+#16322 = DIRECTION('',(0.,0.,1.));+#16323 = PCURVE('',#15804,#16324);+#16324 = DEFINITIONAL_REPRESENTATION('',(#16325),#16329);+#16325 = CIRCLE('',#16326,0.147);+#16326 = AXIS2_PLACEMENT_2D('',#16327,#16328);+#16327 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#16328 = DIRECTION('',(1.,0.));+#16329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16330 = PCURVE('',#15889,#16331);+#16331 = DEFINITIONAL_REPRESENTATION('',(#16332),#16336);+#16332 = LINE('',#16333,#16334);+#16333 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#16334 = VECTOR('',#16335,1.);+#16335 = DIRECTION('',(1.,0.));+#16336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16337 = ORIENTED_EDGE('',*,*,#16338,.T.);+#16338 = EDGE_CURVE('',#16315,#16339,#16341,.T.);+#16339 = VERTEX_POINT('',#16340);+#16340 = CARTESIAN_POINT('',(3.958168154079,-2.34,0.127361620474));+#16341 = SURFACE_CURVE('',#16342,(#16346,#16353),.PCURVE_S1.);+#16342 = LINE('',#16343,#16344);+#16343 = CARTESIAN_POINT('',(3.626407401915,-2.34,0.754547974408));+#16344 = VECTOR('',#16345,1.);+#16345 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#16346 = PCURVE('',#15804,#16347);+#16347 = DEFINITIONAL_REPRESENTATION('',(#16348),#16352);+#16348 = LINE('',#16349,#16350);+#16349 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#16350 = VECTOR('',#16351,1.);+#16351 = DIRECTION('',(-0.883950512662,0.467580464908));+#16352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16353 = PCURVE('',#15967,#16354);+#16354 = DEFINITIONAL_REPRESENTATION('',(#16355),#16359);+#16355 = LINE('',#16356,#16357);+#16356 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#16357 = VECTOR('',#16358,1.);+#16358 = DIRECTION('',(1.,0.));+#16359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16360 = ORIENTED_EDGE('',*,*,#16361,.F.);+#16361 = EDGE_CURVE('',#16362,#16339,#16364,.T.);+#16362 = VERTEX_POINT('',#16363);+#16363 = CARTESIAN_POINT('',(3.99529407561,-2.34,0.105));+#16364 = SURFACE_CURVE('',#16365,(#16370,#16377),.PCURVE_S1.);+#16365 = CIRCLE('',#16366,4.2E-02);+#16366 = AXIS2_PLACEMENT_3D('',#16367,#16368,#16369);+#16367 = CARTESIAN_POINT('',(3.99529407561,-2.34,0.147));+#16368 = DIRECTION('',(0.,1.,0.));+#16369 = DIRECTION('',(0.,0.,1.));+#16370 = PCURVE('',#15804,#16371);+#16371 = DEFINITIONAL_REPRESENTATION('',(#16372),#16376);+#16372 = CIRCLE('',#16373,4.2E-02);+#16373 = AXIS2_PLACEMENT_2D('',#16374,#16375);+#16374 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#16375 = DIRECTION('',(1.,0.));+#16376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16377 = PCURVE('',#15996,#16378);+#16378 = DEFINITIONAL_REPRESENTATION('',(#16379),#16383);+#16379 = LINE('',#16380,#16381);+#16380 = CARTESIAN_POINT('',(0.,-9.E-02));+#16381 = VECTOR('',#16382,1.);+#16382 = DIRECTION('',(1.,0.));+#16383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16384 = ORIENTED_EDGE('',*,*,#16385,.T.);+#16385 = EDGE_CURVE('',#16362,#16386,#16388,.T.);+#16386 = VERTEX_POINT('',#16387);+#16387 = CARTESIAN_POINT('',(4.43,-2.34,0.105));+#16388 = SURFACE_CURVE('',#16389,(#16393,#16400),.PCURVE_S1.);+#16389 = LINE('',#16390,#16391);+#16390 = CARTESIAN_POINT('',(3.938375,-2.34,0.105));+#16391 = VECTOR('',#16392,1.);+#16392 = DIRECTION('',(1.,0.,0.));+#16393 = PCURVE('',#15804,#16394);+#16394 = DEFINITIONAL_REPRESENTATION('',(#16395),#16399);+#16395 = LINE('',#16396,#16397);+#16396 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#16397 = VECTOR('',#16398,1.);+#16398 = DIRECTION('',(0.,1.));+#16399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16400 = PCURVE('',#16024,#16401);+#16401 = DEFINITIONAL_REPRESENTATION('',(#16402),#16406);+#16402 = LINE('',#16403,#16404);+#16403 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#16404 = VECTOR('',#16405,1.);+#16405 = DIRECTION('',(1.,0.));+#16406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16407 = ORIENTED_EDGE('',*,*,#16408,.T.);+#16408 = EDGE_CURVE('',#16386,#16409,#16411,.T.);+#16409 = VERTEX_POINT('',#16410);+#16410 = CARTESIAN_POINT('',(4.43,-2.34,0.));+#16411 = SURFACE_CURVE('',#16412,(#16416,#16423),.PCURVE_S1.);+#16412 = LINE('',#16413,#16414);+#16413 = CARTESIAN_POINT('',(4.43,-2.34,-8.142959240193E-02));+#16414 = VECTOR('',#16415,1.);+#16415 = DIRECTION('',(0.,0.,-1.));+#16416 = PCURVE('',#15804,#16417);+#16417 = DEFINITIONAL_REPRESENTATION('',(#16418),#16422);+#16418 = LINE('',#16419,#16420);+#16419 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#16420 = VECTOR('',#16421,1.);+#16421 = DIRECTION('',(-1.,0.));+#16422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16423 = PCURVE('',#16052,#16424);+#16424 = DEFINITIONAL_REPRESENTATION('',(#16425),#16429);+#16425 = LINE('',#16426,#16427);+#16426 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#16427 = VECTOR('',#16428,1.);+#16428 = DIRECTION('',(-1.,0.));+#16429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16430 = ORIENTED_EDGE('',*,*,#16431,.F.);+#16431 = EDGE_CURVE('',#16432,#16409,#16434,.T.);+#16432 = VERTEX_POINT('',#16433);+#16433 = CARTESIAN_POINT('',(3.99529407561,-2.34,0.));+#16434 = SURFACE_CURVE('',#16435,(#16439,#16446),.PCURVE_S1.);+#16435 = LINE('',#16436,#16437);+#16436 = CARTESIAN_POINT('',(3.938375,-2.34,0.));+#16437 = VECTOR('',#16438,1.);+#16438 = DIRECTION('',(1.,0.,0.));+#16439 = PCURVE('',#15804,#16440);+#16440 = DEFINITIONAL_REPRESENTATION('',(#16441),#16445);+#16441 = LINE('',#16442,#16443);+#16442 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#16443 = VECTOR('',#16444,1.);+#16444 = DIRECTION('',(0.,1.));+#16445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16446 = PCURVE('',#16080,#16447);+#16447 = DEFINITIONAL_REPRESENTATION('',(#16448),#16452);+#16448 = LINE('',#16449,#16450);+#16449 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#16450 = VECTOR('',#16451,1.);+#16451 = DIRECTION('',(1.,0.));+#16452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16453 = ORIENTED_EDGE('',*,*,#16454,.T.);+#16454 = EDGE_CURVE('',#16432,#16455,#16457,.T.);+#16455 = VERTEX_POINT('',#16456);+#16456 = CARTESIAN_POINT('',(3.865353350249,-2.34,7.826567165848E-02));+#16457 = SURFACE_CURVE('',#16458,(#16463,#16470),.PCURVE_S1.);+#16458 = CIRCLE('',#16459,0.147);+#16459 = AXIS2_PLACEMENT_3D('',#16460,#16461,#16462);+#16460 = CARTESIAN_POINT('',(3.99529407561,-2.34,0.147));+#16461 = DIRECTION('',(0.,1.,0.));+#16462 = DIRECTION('',(0.,0.,1.));+#16463 = PCURVE('',#15804,#16464);+#16464 = DEFINITIONAL_REPRESENTATION('',(#16465),#16469);+#16465 = CIRCLE('',#16466,0.147);+#16466 = AXIS2_PLACEMENT_2D('',#16467,#16468);+#16467 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#16468 = DIRECTION('',(1.,0.));+#16469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16470 = PCURVE('',#16109,#16471);+#16471 = DEFINITIONAL_REPRESENTATION('',(#16472),#16476);+#16472 = LINE('',#16473,#16474);+#16473 = CARTESIAN_POINT('',(0.,-9.E-02));+#16474 = VECTOR('',#16475,1.);+#16475 = DIRECTION('',(1.,0.));+#16476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16477 = ORIENTED_EDGE('',*,*,#16478,.F.);+#16478 = EDGE_CURVE('',#16479,#16455,#16481,.T.);+#16479 = VERTEX_POINT('',#16480);+#16480 = CARTESIAN_POINT('',(3.560206845921,-2.34,0.655138379526));+#16481 = SURFACE_CURVE('',#16482,(#16486,#16493),.PCURVE_S1.);+#16482 = LINE('',#16483,#16484);+#16483 = CARTESIAN_POINT('',(3.533592598085,-2.34,0.705452025592));+#16484 = VECTOR('',#16485,1.);+#16485 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#16486 = PCURVE('',#15804,#16487);+#16487 = DEFINITIONAL_REPRESENTATION('',(#16488),#16492);+#16488 = LINE('',#16489,#16490);+#16489 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#16490 = VECTOR('',#16491,1.);+#16491 = DIRECTION('',(-0.883950512662,0.467580464908));+#16492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16493 = PCURVE('',#16137,#16494);+#16494 = DEFINITIONAL_REPRESENTATION('',(#16495),#16499);+#16495 = LINE('',#16496,#16497);+#16496 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#16497 = VECTOR('',#16498,1.);+#16498 = DIRECTION('',(1.,0.));+#16499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16500 = ORIENTED_EDGE('',*,*,#16501,.F.);+#16501 = EDGE_CURVE('',#16502,#16479,#16504,.T.);+#16502 = VERTEX_POINT('',#16503);+#16503 = CARTESIAN_POINT('',(3.52308092439,-2.34,0.6775));+#16504 = SURFACE_CURVE('',#16505,(#16510,#16517),.PCURVE_S1.);+#16505 = CIRCLE('',#16506,4.2E-02);+#16506 = AXIS2_PLACEMENT_3D('',#16507,#16508,#16509);+#16507 = CARTESIAN_POINT('',(3.52308092439,-2.34,0.6355));+#16508 = DIRECTION('',(0.,1.,0.));+#16509 = DIRECTION('',(0.,0.,1.));+#16510 = PCURVE('',#15804,#16511);+#16511 = DEFINITIONAL_REPRESENTATION('',(#16512),#16516);+#16512 = CIRCLE('',#16513,4.2E-02);+#16513 = AXIS2_PLACEMENT_2D('',#16514,#16515);+#16514 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#16515 = DIRECTION('',(1.,0.));+#16516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16517 = PCURVE('',#16166,#16518);+#16518 = DEFINITIONAL_REPRESENTATION('',(#16519),#16523);+#16519 = LINE('',#16520,#16521);+#16520 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#16521 = VECTOR('',#16522,1.);+#16522 = DIRECTION('',(1.,0.));+#16523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16524 = ORIENTED_EDGE('',*,*,#16525,.F.);+#16525 = EDGE_CURVE('',#16526,#16502,#16528,.T.);+#16526 = VERTEX_POINT('',#16527);+#16527 = CARTESIAN_POINT('',(3.25,-2.34,0.6775));+#16528 = SURFACE_CURVE('',#16529,(#16533,#16540),.PCURVE_S1.);+#16529 = LINE('',#16530,#16531);+#16530 = CARTESIAN_POINT('',(3.25,-2.34,0.6775));+#16531 = VECTOR('',#16532,1.);+#16532 = DIRECTION('',(1.,0.,0.));+#16533 = PCURVE('',#15804,#16534);+#16534 = DEFINITIONAL_REPRESENTATION('',(#16535),#16539);+#16535 = LINE('',#16536,#16537);+#16536 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#16537 = VECTOR('',#16538,1.);+#16538 = DIRECTION('',(0.,1.));+#16539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16540 = PCURVE('',#16194,#16541);+#16541 = DEFINITIONAL_REPRESENTATION('',(#16542),#16546);+#16542 = LINE('',#16543,#16544);+#16543 = CARTESIAN_POINT('',(0.,-9.E-02));+#16544 = VECTOR('',#16545,1.);+#16545 = DIRECTION('',(1.,0.));+#16546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16547 = ORIENTED_EDGE('',*,*,#16548,.F.);+#16548 = EDGE_CURVE('',#16265,#16526,#16549,.T.);+#16549 = SURFACE_CURVE('',#16550,(#16555,#16566),.PCURVE_S1.);+#16550 = CIRCLE('',#16551,5.25E-02);+#16551 = AXIS2_PLACEMENT_3D('',#16552,#16553,#16554);+#16552 = CARTESIAN_POINT('',(3.25,-2.34,0.73));+#16553 = DIRECTION('',(0.,-1.,0.));+#16554 = DIRECTION('',(1.,0.,0.));+#16555 = PCURVE('',#15804,#16556);+#16556 = DEFINITIONAL_REPRESENTATION('',(#16557),#16565);+#16557 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16558,#16559,#16560,#16561+ ,#16562,#16563,#16564),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16558 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#16559 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#16560 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#16561 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#16562 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#16563 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#16564 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#16565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16566 = PCURVE('',#16227,#16567);+#16567 = DEFINITIONAL_REPRESENTATION('',(#16568),#16572);+#16568 = LINE('',#16569,#16570);+#16569 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#16570 = VECTOR('',#16571,1.);+#16571 = DIRECTION('',(-1.,0.));+#16572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16573 = ORIENTED_EDGE('',*,*,#16264,.F.);+#16574 = ADVANCED_FACE('',(#16575),#15889,.T.);+#16575 = FACE_BOUND('',#16576,.T.);+#16576 = EDGE_LOOP('',(#16577,#16578,#16579,#16600));+#16577 = ORIENTED_EDGE('',*,*,#15873,.F.);+#16578 = ORIENTED_EDGE('',*,*,#16314,.T.);+#16579 = ORIENTED_EDGE('',*,*,#16580,.T.);+#16580 = EDGE_CURVE('',#16315,#15928,#16581,.T.);+#16581 = SURFACE_CURVE('',#16582,(#16586,#16593),.PCURVE_S1.);+#16582 = LINE('',#16583,#16584);+#16583 = CARTESIAN_POINT('',(3.653021649751,-2.34,0.704234328342));+#16584 = VECTOR('',#16585,1.);+#16585 = DIRECTION('',(0.,1.,0.));+#16586 = PCURVE('',#15889,#16587);+#16587 = DEFINITIONAL_REPRESENTATION('',(#16588),#16592);+#16588 = LINE('',#16589,#16590);+#16589 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#16590 = VECTOR('',#16591,1.);+#16591 = DIRECTION('',(-0.,1.));+#16592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16593 = PCURVE('',#15967,#16594);+#16594 = DEFINITIONAL_REPRESENTATION('',(#16595),#16599);+#16595 = LINE('',#16596,#16597);+#16596 = CARTESIAN_POINT('',(0.,-9.E-02));+#16597 = VECTOR('',#16598,1.);+#16598 = DIRECTION('',(0.,1.));+#16599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16600 = ORIENTED_EDGE('',*,*,#15927,.F.);+#16601 = ADVANCED_FACE('',(#16602),#16227,.T.);+#16602 = FACE_BOUND('',#16603,.T.);+#16603 = EDGE_LOOP('',(#16604,#16605,#16626,#16627));+#16604 = ORIENTED_EDGE('',*,*,#16206,.T.);+#16605 = ORIENTED_EDGE('',*,*,#16606,.T.);+#16606 = EDGE_CURVE('',#16179,#16526,#16607,.T.);+#16607 = SURFACE_CURVE('',#16608,(#16612,#16619),.PCURVE_S1.);+#16608 = LINE('',#16609,#16610);+#16609 = CARTESIAN_POINT('',(3.25,-2.16,0.6775));+#16610 = VECTOR('',#16611,1.);+#16611 = DIRECTION('',(0.,-1.,0.));+#16612 = PCURVE('',#16227,#16613);+#16613 = DEFINITIONAL_REPRESENTATION('',(#16614),#16618);+#16614 = LINE('',#16615,#16616);+#16615 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#16616 = VECTOR('',#16617,1.);+#16617 = DIRECTION('',(-0.,-1.));+#16618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16619 = PCURVE('',#16194,#16620);+#16620 = DEFINITIONAL_REPRESENTATION('',(#16621),#16625);+#16621 = LINE('',#16622,#16623);+#16622 = CARTESIAN_POINT('',(0.,9.E-02));+#16623 = VECTOR('',#16624,1.);+#16624 = DIRECTION('',(0.,-1.));+#16625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16626 = ORIENTED_EDGE('',*,*,#16548,.F.);+#16627 = ORIENTED_EDGE('',*,*,#16287,.T.);+#16628 = ADVANCED_FACE('',(#16629),#16194,.F.);+#16629 = FACE_BOUND('',#16630,.F.);+#16630 = EDGE_LOOP('',(#16631,#16632,#16653,#16654));+#16631 = ORIENTED_EDGE('',*,*,#16525,.T.);+#16632 = ORIENTED_EDGE('',*,*,#16633,.F.);+#16633 = EDGE_CURVE('',#16150,#16502,#16634,.T.);+#16634 = SURFACE_CURVE('',#16635,(#16639,#16646),.PCURVE_S1.);+#16635 = LINE('',#16636,#16637);+#16636 = CARTESIAN_POINT('',(3.52308092439,-2.16,0.6775));+#16637 = VECTOR('',#16638,1.);+#16638 = DIRECTION('',(0.,-1.,0.));+#16639 = PCURVE('',#16194,#16640);+#16640 = DEFINITIONAL_REPRESENTATION('',(#16641),#16645);+#16641 = LINE('',#16642,#16643);+#16642 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#16643 = VECTOR('',#16644,1.);+#16644 = DIRECTION('',(0.,-1.));+#16645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16646 = PCURVE('',#16166,#16647);+#16647 = DEFINITIONAL_REPRESENTATION('',(#16648),#16652);+#16648 = LINE('',#16649,#16650);+#16649 = CARTESIAN_POINT('',(0.,9.E-02));+#16650 = VECTOR('',#16651,1.);+#16651 = DIRECTION('',(0.,-1.));+#16652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16653 = ORIENTED_EDGE('',*,*,#16178,.F.);+#16654 = ORIENTED_EDGE('',*,*,#16606,.T.);+#16655 = ADVANCED_FACE('',(#16656),#16166,.F.);+#16656 = FACE_BOUND('',#16657,.F.);+#16657 = EDGE_LOOP('',(#16658,#16659,#16680,#16681));+#16658 = ORIENTED_EDGE('',*,*,#16501,.T.);+#16659 = ORIENTED_EDGE('',*,*,#16660,.F.);+#16660 = EDGE_CURVE('',#16122,#16479,#16661,.T.);+#16661 = SURFACE_CURVE('',#16662,(#16666,#16673),.PCURVE_S1.);+#16662 = LINE('',#16663,#16664);+#16663 = CARTESIAN_POINT('',(3.560206845921,-2.16,0.655138379526));+#16664 = VECTOR('',#16665,1.);+#16665 = DIRECTION('',(0.,-1.,0.));+#16666 = PCURVE('',#16166,#16667);+#16667 = DEFINITIONAL_REPRESENTATION('',(#16668),#16672);+#16668 = LINE('',#16669,#16670);+#16669 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#16670 = VECTOR('',#16671,1.);+#16671 = DIRECTION('',(0.,-1.));+#16672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16673 = PCURVE('',#16137,#16674);+#16674 = DEFINITIONAL_REPRESENTATION('',(#16675),#16679);+#16675 = LINE('',#16676,#16677);+#16676 = CARTESIAN_POINT('',(0.,9.E-02));+#16677 = VECTOR('',#16678,1.);+#16678 = DIRECTION('',(0.,-1.));+#16679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16680 = ORIENTED_EDGE('',*,*,#16149,.F.);+#16681 = ORIENTED_EDGE('',*,*,#16633,.T.);+#16682 = ADVANCED_FACE('',(#16683),#16137,.F.);+#16683 = FACE_BOUND('',#16684,.F.);+#16684 = EDGE_LOOP('',(#16685,#16686,#16707,#16708));+#16685 = ORIENTED_EDGE('',*,*,#16478,.T.);+#16686 = ORIENTED_EDGE('',*,*,#16687,.F.);+#16687 = EDGE_CURVE('',#16093,#16455,#16688,.T.);+#16688 = SURFACE_CURVE('',#16689,(#16693,#16700),.PCURVE_S1.);+#16689 = LINE('',#16690,#16691);+#16690 = CARTESIAN_POINT('',(3.865353350249,-2.16,7.826567165848E-02));+#16691 = VECTOR('',#16692,1.);+#16692 = DIRECTION('',(0.,-1.,0.));+#16693 = PCURVE('',#16137,#16694);+#16694 = DEFINITIONAL_REPRESENTATION('',(#16695),#16699);+#16695 = LINE('',#16696,#16697);+#16696 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#16697 = VECTOR('',#16698,1.);+#16698 = DIRECTION('',(0.,-1.));+#16699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16700 = PCURVE('',#16109,#16701);+#16701 = DEFINITIONAL_REPRESENTATION('',(#16702),#16706);+#16702 = LINE('',#16703,#16704);+#16703 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#16704 = VECTOR('',#16705,1.);+#16705 = DIRECTION('',(0.,-1.));+#16706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16707 = ORIENTED_EDGE('',*,*,#16121,.F.);+#16708 = ORIENTED_EDGE('',*,*,#16660,.T.);+#16709 = ADVANCED_FACE('',(#16710),#16109,.T.);+#16710 = FACE_BOUND('',#16711,.T.);+#16711 = EDGE_LOOP('',(#16712,#16713,#16714,#16715));+#16712 = ORIENTED_EDGE('',*,*,#16454,.T.);+#16713 = ORIENTED_EDGE('',*,*,#16687,.F.);+#16714 = ORIENTED_EDGE('',*,*,#16092,.F.);+#16715 = ORIENTED_EDGE('',*,*,#16716,.T.);+#16716 = EDGE_CURVE('',#16065,#16432,#16717,.T.);+#16717 = SURFACE_CURVE('',#16718,(#16722,#16729),.PCURVE_S1.);+#16718 = LINE('',#16719,#16720);+#16719 = CARTESIAN_POINT('',(3.99529407561,-2.16,0.));+#16720 = VECTOR('',#16721,1.);+#16721 = DIRECTION('',(0.,-1.,0.));+#16722 = PCURVE('',#16109,#16723);+#16723 = DEFINITIONAL_REPRESENTATION('',(#16724),#16728);+#16724 = LINE('',#16725,#16726);+#16725 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#16726 = VECTOR('',#16727,1.);+#16727 = DIRECTION('',(0.,-1.));+#16728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16729 = PCURVE('',#16080,#16730);+#16730 = DEFINITIONAL_REPRESENTATION('',(#16731),#16735);+#16731 = LINE('',#16732,#16733);+#16732 = CARTESIAN_POINT('',(0.,9.E-02));+#16733 = VECTOR('',#16734,1.);+#16734 = DIRECTION('',(0.,-1.));+#16735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16736 = ADVANCED_FACE('',(#16737),#16080,.F.);+#16737 = FACE_BOUND('',#16738,.F.);+#16738 = EDGE_LOOP('',(#16739,#16740,#16741,#16762));+#16739 = ORIENTED_EDGE('',*,*,#16716,.T.);+#16740 = ORIENTED_EDGE('',*,*,#16431,.T.);+#16741 = ORIENTED_EDGE('',*,*,#16742,.T.);+#16742 = EDGE_CURVE('',#16409,#16037,#16743,.T.);+#16743 = SURFACE_CURVE('',#16744,(#16748,#16755),.PCURVE_S1.);+#16744 = LINE('',#16745,#16746);+#16745 = CARTESIAN_POINT('',(4.43,-2.545,0.));+#16746 = VECTOR('',#16747,1.);+#16747 = DIRECTION('',(0.,1.,0.));+#16748 = PCURVE('',#16080,#16749);+#16749 = DEFINITIONAL_REPRESENTATION('',(#16750),#16754);+#16750 = LINE('',#16751,#16752);+#16751 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#16752 = VECTOR('',#16753,1.);+#16753 = DIRECTION('',(0.,1.));+#16754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16755 = PCURVE('',#16052,#16756);+#16756 = DEFINITIONAL_REPRESENTATION('',(#16757),#16761);+#16757 = LINE('',#16758,#16759);+#16758 = CARTESIAN_POINT('',(0.5,-0.295));+#16759 = VECTOR('',#16760,1.);+#16760 = DIRECTION('',(0.,-1.));+#16761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16762 = ORIENTED_EDGE('',*,*,#16064,.F.);+#16763 = ADVANCED_FACE('',(#16764),#16052,.T.);+#16764 = FACE_BOUND('',#16765,.T.);+#16765 = EDGE_LOOP('',(#16766,#16767,#16788,#16789));+#16766 = ORIENTED_EDGE('',*,*,#16036,.F.);+#16767 = ORIENTED_EDGE('',*,*,#16768,.F.);+#16768 = EDGE_CURVE('',#16386,#16009,#16769,.T.);+#16769 = SURFACE_CURVE('',#16770,(#16774,#16781),.PCURVE_S1.);+#16770 = LINE('',#16771,#16772);+#16771 = CARTESIAN_POINT('',(4.43,-2.545,0.105));+#16772 = VECTOR('',#16773,1.);+#16773 = DIRECTION('',(0.,1.,0.));+#16774 = PCURVE('',#16052,#16775);+#16775 = DEFINITIONAL_REPRESENTATION('',(#16776),#16780);+#16776 = LINE('',#16777,#16778);+#16777 = CARTESIAN_POINT('',(0.605,-0.295));+#16778 = VECTOR('',#16779,1.);+#16779 = DIRECTION('',(0.,-1.));+#16780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16781 = PCURVE('',#16024,#16782);+#16782 = DEFINITIONAL_REPRESENTATION('',(#16783),#16787);+#16783 = LINE('',#16784,#16785);+#16784 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#16785 = VECTOR('',#16786,1.);+#16786 = DIRECTION('',(0.,1.));+#16787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16788 = ORIENTED_EDGE('',*,*,#16408,.T.);+#16789 = ORIENTED_EDGE('',*,*,#16742,.T.);+#16790 = ADVANCED_FACE('',(#16791),#16024,.T.);+#16791 = FACE_BOUND('',#16792,.T.);+#16792 = EDGE_LOOP('',(#16793,#16814,#16815,#16816));+#16793 = ORIENTED_EDGE('',*,*,#16794,.T.);+#16794 = EDGE_CURVE('',#15980,#16362,#16795,.T.);+#16795 = SURFACE_CURVE('',#16796,(#16800,#16807),.PCURVE_S1.);+#16796 = LINE('',#16797,#16798);+#16797 = CARTESIAN_POINT('',(3.99529407561,-2.16,0.105));+#16798 = VECTOR('',#16799,1.);+#16799 = DIRECTION('',(0.,-1.,0.));+#16800 = PCURVE('',#16024,#16801);+#16801 = DEFINITIONAL_REPRESENTATION('',(#16802),#16806);+#16802 = LINE('',#16803,#16804);+#16803 = CARTESIAN_POINT('',(0.,9.E-02));+#16804 = VECTOR('',#16805,1.);+#16805 = DIRECTION('',(0.,-1.));+#16806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16807 = PCURVE('',#15996,#16808);+#16808 = DEFINITIONAL_REPRESENTATION('',(#16809),#16813);+#16809 = LINE('',#16810,#16811);+#16810 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#16811 = VECTOR('',#16812,1.);+#16812 = DIRECTION('',(0.,-1.));+#16813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16814 = ORIENTED_EDGE('',*,*,#16385,.T.);+#16815 = ORIENTED_EDGE('',*,*,#16768,.T.);+#16816 = ORIENTED_EDGE('',*,*,#16008,.F.);+#16817 = ADVANCED_FACE('',(#16818),#15996,.F.);+#16818 = FACE_BOUND('',#16819,.F.);+#16819 = EDGE_LOOP('',(#16820,#16821,#16842,#16843));+#16820 = ORIENTED_EDGE('',*,*,#16361,.T.);+#16821 = ORIENTED_EDGE('',*,*,#16822,.F.);+#16822 = EDGE_CURVE('',#15952,#16339,#16823,.T.);+#16823 = SURFACE_CURVE('',#16824,(#16828,#16835),.PCURVE_S1.);+#16824 = LINE('',#16825,#16826);+#16825 = CARTESIAN_POINT('',(3.958168154079,-2.16,0.127361620474));+#16826 = VECTOR('',#16827,1.);+#16827 = DIRECTION('',(0.,-1.,0.));+#16828 = PCURVE('',#15996,#16829);+#16829 = DEFINITIONAL_REPRESENTATION('',(#16830),#16834);+#16830 = LINE('',#16831,#16832);+#16831 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#16832 = VECTOR('',#16833,1.);+#16833 = DIRECTION('',(0.,-1.));+#16834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16835 = PCURVE('',#15967,#16836);+#16836 = DEFINITIONAL_REPRESENTATION('',(#16837),#16841);+#16837 = LINE('',#16838,#16839);+#16838 = CARTESIAN_POINT('',(0.65260747022,9.E-02));+#16839 = VECTOR('',#16840,1.);+#16840 = DIRECTION('',(0.,-1.));+#16841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16842 = ORIENTED_EDGE('',*,*,#15979,.F.);+#16843 = ORIENTED_EDGE('',*,*,#16794,.T.);+#16844 = ADVANCED_FACE('',(#16845),#15967,.T.);+#16845 = FACE_BOUND('',#16846,.T.);+#16846 = EDGE_LOOP('',(#16847,#16848,#16849,#16850));+#16847 = ORIENTED_EDGE('',*,*,#16580,.F.);+#16848 = ORIENTED_EDGE('',*,*,#16338,.T.);+#16849 = ORIENTED_EDGE('',*,*,#16822,.F.);+#16850 = ORIENTED_EDGE('',*,*,#15951,.F.);+#16851 = MANIFOLD_SOLID_BREP('',#16852);+#16852 = CLOSED_SHELL('',(#16853,#16983,#17059,#17397,#17446,#17712,+ #17739,#17766,#17793,#17820,#17847,#17874,#17901,#17928,#17955,+ #17982));+#16853 = ADVANCED_FACE('',(#16854),#16869,.T.);+#16854 = FACE_BOUND('',#16855,.T.);+#16855 = EDGE_LOOP('',(#16856,#16896,#16924,#16957));+#16856 = ORIENTED_EDGE('',*,*,#16857,.T.);+#16857 = EDGE_CURVE('',#16858,#16860,#16862,.T.);+#16858 = VERTEX_POINT('',#16859);+#16859 = CARTESIAN_POINT('',(3.25,-1.66,0.7825));+#16860 = VERTEX_POINT('',#16861);+#16861 = CARTESIAN_POINT('',(3.2,-1.66,0.746007810594));+#16862 = SURFACE_CURVE('',#16863,(#16868,#16880),.PCURVE_S1.);+#16863 = CIRCLE('',#16864,5.25E-02);+#16864 = AXIS2_PLACEMENT_3D('',#16865,#16866,#16867);+#16865 = CARTESIAN_POINT('',(3.25,-1.66,0.73));+#16866 = DIRECTION('',(0.,-1.,0.));+#16867 = DIRECTION('',(1.,0.,0.));+#16868 = PCURVE('',#16869,#16874);+#16869 = CYLINDRICAL_SURFACE('',#16870,5.25E-02);+#16870 = AXIS2_PLACEMENT_3D('',#16871,#16872,#16873);+#16871 = CARTESIAN_POINT('',(3.25,-1.75,0.73));+#16872 = DIRECTION('',(0.,1.,0.));+#16873 = DIRECTION('',(1.,0.,0.));+#16874 = DEFINITIONAL_REPRESENTATION('',(#16875),#16879);+#16875 = LINE('',#16876,#16877);+#16876 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#16877 = VECTOR('',#16878,1.);+#16878 = DIRECTION('',(-1.,-0.));+#16879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16880 = PCURVE('',#16881,#16886);+#16881 = PLANE('',#16882);+#16882 = AXIS2_PLACEMENT_3D('',#16883,#16884,#16885);+#16883 = CARTESIAN_POINT('',(3.861815252728,-1.66,0.337140815196));+#16884 = DIRECTION('',(0.,1.,0.));+#16885 = DIRECTION('',(0.,0.,1.));+#16886 = DEFINITIONAL_REPRESENTATION('',(#16887),#16895);+#16887 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16888,#16889,#16890,#16891+ ,#16892,#16893,#16894),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16888 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#16889 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#16890 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#16891 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#16892 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#16893 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#16894 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#16895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16896 = ORIENTED_EDGE('',*,*,#16897,.F.);+#16897 = EDGE_CURVE('',#16898,#16860,#16900,.T.);+#16898 = VERTEX_POINT('',#16899);+#16899 = CARTESIAN_POINT('',(3.2,-1.84,0.746007810594));+#16900 = SURFACE_CURVE('',#16901,(#16905,#16912),.PCURVE_S1.);+#16901 = LINE('',#16902,#16903);+#16902 = CARTESIAN_POINT('',(3.2,-1.75,0.746007810594));+#16903 = VECTOR('',#16904,1.);+#16904 = DIRECTION('',(0.,1.,0.));+#16905 = PCURVE('',#16869,#16906);+#16906 = DEFINITIONAL_REPRESENTATION('',(#16907),#16911);+#16907 = LINE('',#16908,#16909);+#16908 = CARTESIAN_POINT('',(3.451437293332,0.));+#16909 = VECTOR('',#16910,1.);+#16910 = DIRECTION('',(-0.,1.));+#16911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16912 = PCURVE('',#16913,#16918);+#16913 = PLANE('',#16914);+#16914 = AXIS2_PLACEMENT_3D('',#16915,#16916,#16917);+#16915 = CARTESIAN_POINT('',(3.2,-2.34,-0.5));+#16916 = DIRECTION('',(1.,0.,0.));+#16917 = DIRECTION('',(0.,0.,1.));+#16918 = DEFINITIONAL_REPRESENTATION('',(#16919),#16923);+#16919 = LINE('',#16920,#16921);+#16920 = CARTESIAN_POINT('',(1.246007810594,-0.59));+#16921 = VECTOR('',#16922,1.);+#16922 = DIRECTION('',(0.,-1.));+#16923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16924 = ORIENTED_EDGE('',*,*,#16925,.F.);+#16925 = EDGE_CURVE('',#16926,#16898,#16928,.T.);+#16926 = VERTEX_POINT('',#16927);+#16927 = CARTESIAN_POINT('',(3.25,-1.84,0.7825));+#16928 = SURFACE_CURVE('',#16929,(#16934,#16941),.PCURVE_S1.);+#16929 = CIRCLE('',#16930,5.25E-02);+#16930 = AXIS2_PLACEMENT_3D('',#16931,#16932,#16933);+#16931 = CARTESIAN_POINT('',(3.25,-1.84,0.73));+#16932 = DIRECTION('',(0.,-1.,0.));+#16933 = DIRECTION('',(1.,0.,0.));+#16934 = PCURVE('',#16869,#16935);+#16935 = DEFINITIONAL_REPRESENTATION('',(#16936),#16940);+#16936 = LINE('',#16937,#16938);+#16937 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#16938 = VECTOR('',#16939,1.);+#16939 = DIRECTION('',(-1.,0.));+#16940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16941 = PCURVE('',#16942,#16947);+#16942 = PLANE('',#16943);+#16943 = AXIS2_PLACEMENT_3D('',#16944,#16945,#16946);+#16944 = CARTESIAN_POINT('',(3.861815252728,-1.84,0.337140815196));+#16945 = DIRECTION('',(0.,1.,0.));+#16946 = DIRECTION('',(0.,0.,1.));+#16947 = DEFINITIONAL_REPRESENTATION('',(#16948),#16956);+#16948 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16949,#16950,#16951,#16952+ ,#16953,#16954,#16955),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#16949 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#16950 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#16951 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#16952 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#16953 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#16954 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#16955 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#16956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16957 = ORIENTED_EDGE('',*,*,#16958,.T.);+#16958 = EDGE_CURVE('',#16926,#16858,#16959,.T.);+#16959 = SURFACE_CURVE('',#16960,(#16964,#16971),.PCURVE_S1.);+#16960 = LINE('',#16961,#16962);+#16961 = CARTESIAN_POINT('',(3.25,-1.84,0.7825));+#16962 = VECTOR('',#16963,1.);+#16963 = DIRECTION('',(0.,1.,0.));+#16964 = PCURVE('',#16869,#16965);+#16965 = DEFINITIONAL_REPRESENTATION('',(#16966),#16970);+#16966 = LINE('',#16967,#16968);+#16967 = CARTESIAN_POINT('',(4.712388980385,-9.E-02));+#16968 = VECTOR('',#16969,1.);+#16969 = DIRECTION('',(0.,1.));+#16970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16971 = PCURVE('',#16972,#16977);+#16972 = PLANE('',#16973);+#16973 = AXIS2_PLACEMENT_3D('',#16974,#16975,#16976);+#16974 = CARTESIAN_POINT('',(3.25,-1.75,0.7825));+#16975 = DIRECTION('',(0.,0.,1.));+#16976 = DIRECTION('',(1.,0.,0.));+#16977 = DEFINITIONAL_REPRESENTATION('',(#16978),#16982);+#16978 = LINE('',#16979,#16980);+#16979 = CARTESIAN_POINT('',(0.,-9.E-02));+#16980 = VECTOR('',#16981,1.);+#16981 = DIRECTION('',(0.,1.));+#16982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16983 = ADVANCED_FACE('',(#16984),#16972,.T.);+#16984 = FACE_BOUND('',#16985,.T.);+#16985 = EDGE_LOOP('',(#16986,#16987,#17010,#17038));+#16986 = ORIENTED_EDGE('',*,*,#16958,.F.);+#16987 = ORIENTED_EDGE('',*,*,#16988,.T.);+#16988 = EDGE_CURVE('',#16926,#16989,#16991,.T.);+#16989 = VERTEX_POINT('',#16990);+#16990 = CARTESIAN_POINT('',(3.52308092439,-1.84,0.7825));+#16991 = SURFACE_CURVE('',#16992,(#16996,#17003),.PCURVE_S1.);+#16992 = LINE('',#16993,#16994);+#16993 = CARTESIAN_POINT('',(3.25,-1.84,0.7825));+#16994 = VECTOR('',#16995,1.);+#16995 = DIRECTION('',(1.,0.,0.));+#16996 = PCURVE('',#16972,#16997);+#16997 = DEFINITIONAL_REPRESENTATION('',(#16998),#17002);+#16998 = LINE('',#16999,#17000);+#16999 = CARTESIAN_POINT('',(0.,-9.E-02));+#17000 = VECTOR('',#17001,1.);+#17001 = DIRECTION('',(1.,0.));+#17002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17003 = PCURVE('',#16942,#17004);+#17004 = DEFINITIONAL_REPRESENTATION('',(#17005),#17009);+#17005 = LINE('',#17006,#17007);+#17006 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#17007 = VECTOR('',#17008,1.);+#17008 = DIRECTION('',(0.,1.));+#17009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17010 = ORIENTED_EDGE('',*,*,#17011,.T.);+#17011 = EDGE_CURVE('',#16989,#17012,#17014,.T.);+#17012 = VERTEX_POINT('',#17013);+#17013 = CARTESIAN_POINT('',(3.52308092439,-1.66,0.7825));+#17014 = SURFACE_CURVE('',#17015,(#17019,#17026),.PCURVE_S1.);+#17015 = LINE('',#17016,#17017);+#17016 = CARTESIAN_POINT('',(3.52308092439,-1.84,0.7825));+#17017 = VECTOR('',#17018,1.);+#17018 = DIRECTION('',(0.,1.,0.));+#17019 = PCURVE('',#16972,#17020);+#17020 = DEFINITIONAL_REPRESENTATION('',(#17021),#17025);+#17021 = LINE('',#17022,#17023);+#17022 = CARTESIAN_POINT('',(0.27308092439,-9.E-02));+#17023 = VECTOR('',#17024,1.);+#17024 = DIRECTION('',(0.,1.));+#17025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17026 = PCURVE('',#17027,#17032);+#17027 = CYLINDRICAL_SURFACE('',#17028,0.147);+#17028 = AXIS2_PLACEMENT_3D('',#17029,#17030,#17031);+#17029 = CARTESIAN_POINT('',(3.52308092439,-1.75,0.6355));+#17030 = DIRECTION('',(0.,1.,0.));+#17031 = DIRECTION('',(0.,0.,1.));+#17032 = DEFINITIONAL_REPRESENTATION('',(#17033),#17037);+#17033 = LINE('',#17034,#17035);+#17034 = CARTESIAN_POINT('',(0.,-9.E-02));+#17035 = VECTOR('',#17036,1.);+#17036 = DIRECTION('',(-0.,1.));+#17037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17038 = ORIENTED_EDGE('',*,*,#17039,.F.);+#17039 = EDGE_CURVE('',#16858,#17012,#17040,.T.);+#17040 = SURFACE_CURVE('',#17041,(#17045,#17052),.PCURVE_S1.);+#17041 = LINE('',#17042,#17043);+#17042 = CARTESIAN_POINT('',(3.25,-1.66,0.7825));+#17043 = VECTOR('',#17044,1.);+#17044 = DIRECTION('',(1.,0.,0.));+#17045 = PCURVE('',#16972,#17046);+#17046 = DEFINITIONAL_REPRESENTATION('',(#17047),#17051);+#17047 = LINE('',#17048,#17049);+#17048 = CARTESIAN_POINT('',(0.,9.E-02));+#17049 = VECTOR('',#17050,1.);+#17050 = DIRECTION('',(1.,0.));+#17051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17052 = PCURVE('',#16881,#17053);+#17053 = DEFINITIONAL_REPRESENTATION('',(#17054),#17058);+#17054 = LINE('',#17055,#17056);+#17055 = CARTESIAN_POINT('',(0.445359184804,-0.611815252728));+#17056 = VECTOR('',#17057,1.);+#17057 = DIRECTION('',(0.,1.));+#17058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17059 = ADVANCED_FACE('',(#17060),#16881,.T.);+#17060 = FACE_BOUND('',#17061,.T.);+#17061 = EDGE_LOOP('',(#17062,#17063,#17064,#17088,#17116,#17145,#17173,+ #17201,#17229,#17258,#17286,#17315,#17343,#17376));+#17062 = ORIENTED_EDGE('',*,*,#16857,.F.);+#17063 = ORIENTED_EDGE('',*,*,#17039,.T.);+#17064 = ORIENTED_EDGE('',*,*,#17065,.T.);+#17065 = EDGE_CURVE('',#17012,#17066,#17068,.T.);+#17066 = VERTEX_POINT('',#17067);+#17067 = CARTESIAN_POINT('',(3.653021649751,-1.66,0.704234328342));+#17068 = SURFACE_CURVE('',#17069,(#17074,#17081),.PCURVE_S1.);+#17069 = CIRCLE('',#17070,0.147);+#17070 = AXIS2_PLACEMENT_3D('',#17071,#17072,#17073);+#17071 = CARTESIAN_POINT('',(3.52308092439,-1.66,0.6355));+#17072 = DIRECTION('',(0.,1.,0.));+#17073 = DIRECTION('',(0.,0.,1.));+#17074 = PCURVE('',#16881,#17075);+#17075 = DEFINITIONAL_REPRESENTATION('',(#17076),#17080);+#17076 = CIRCLE('',#17077,0.147);+#17077 = AXIS2_PLACEMENT_2D('',#17078,#17079);+#17078 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#17079 = DIRECTION('',(1.,0.));+#17080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17081 = PCURVE('',#17027,#17082);+#17082 = DEFINITIONAL_REPRESENTATION('',(#17083),#17087);+#17083 = LINE('',#17084,#17085);+#17084 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#17085 = VECTOR('',#17086,1.);+#17086 = DIRECTION('',(1.,-0.));+#17087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17088 = ORIENTED_EDGE('',*,*,#17089,.T.);+#17089 = EDGE_CURVE('',#17066,#17090,#17092,.T.);+#17090 = VERTEX_POINT('',#17091);+#17091 = CARTESIAN_POINT('',(3.958168154079,-1.66,0.127361620474));+#17092 = SURFACE_CURVE('',#17093,(#17097,#17104),.PCURVE_S1.);+#17093 = LINE('',#17094,#17095);+#17094 = CARTESIAN_POINT('',(3.626407401915,-1.66,0.754547974408));+#17095 = VECTOR('',#17096,1.);+#17096 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#17097 = PCURVE('',#16881,#17098);+#17098 = DEFINITIONAL_REPRESENTATION('',(#17099),#17103);+#17099 = LINE('',#17100,#17101);+#17100 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#17101 = VECTOR('',#17102,1.);+#17102 = DIRECTION('',(-0.883950512662,0.467580464908));+#17103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17104 = PCURVE('',#17105,#17110);+#17105 = PLANE('',#17106);+#17106 = AXIS2_PLACEMENT_3D('',#17107,#17108,#17109);+#17107 = CARTESIAN_POINT('',(3.653021649751,-1.75,0.704234328342));+#17108 = DIRECTION('',(0.883950512662,0.,0.467580464908));+#17109 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#17110 = DEFINITIONAL_REPRESENTATION('',(#17111),#17115);+#17111 = LINE('',#17112,#17113);+#17112 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#17113 = VECTOR('',#17114,1.);+#17114 = DIRECTION('',(1.,0.));+#17115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17116 = ORIENTED_EDGE('',*,*,#17117,.F.);+#17117 = EDGE_CURVE('',#17118,#17090,#17120,.T.);+#17118 = VERTEX_POINT('',#17119);+#17119 = CARTESIAN_POINT('',(3.99529407561,-1.66,0.105));+#17120 = SURFACE_CURVE('',#17121,(#17126,#17133),.PCURVE_S1.);+#17121 = CIRCLE('',#17122,4.2E-02);+#17122 = AXIS2_PLACEMENT_3D('',#17123,#17124,#17125);+#17123 = CARTESIAN_POINT('',(3.99529407561,-1.66,0.147));+#17124 = DIRECTION('',(0.,1.,0.));+#17125 = DIRECTION('',(0.,0.,1.));+#17126 = PCURVE('',#16881,#17127);+#17127 = DEFINITIONAL_REPRESENTATION('',(#17128),#17132);+#17128 = CIRCLE('',#17129,4.2E-02);+#17129 = AXIS2_PLACEMENT_2D('',#17130,#17131);+#17130 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#17131 = DIRECTION('',(1.,0.));+#17132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17133 = PCURVE('',#17134,#17139);+#17134 = CYLINDRICAL_SURFACE('',#17135,4.2E-02);+#17135 = AXIS2_PLACEMENT_3D('',#17136,#17137,#17138);+#17136 = CARTESIAN_POINT('',(3.99529407561,-1.75,0.147));+#17137 = DIRECTION('',(0.,1.,0.));+#17138 = DIRECTION('',(0.,0.,1.));+#17139 = DEFINITIONAL_REPRESENTATION('',(#17140),#17144);+#17140 = LINE('',#17141,#17142);+#17141 = CARTESIAN_POINT('',(-0.,9.E-02));+#17142 = VECTOR('',#17143,1.);+#17143 = DIRECTION('',(1.,-0.));+#17144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17145 = ORIENTED_EDGE('',*,*,#17146,.T.);+#17146 = EDGE_CURVE('',#17118,#17147,#17149,.T.);+#17147 = VERTEX_POINT('',#17148);+#17148 = CARTESIAN_POINT('',(4.43,-1.66,0.105));+#17149 = SURFACE_CURVE('',#17150,(#17154,#17161),.PCURVE_S1.);+#17150 = LINE('',#17151,#17152);+#17151 = CARTESIAN_POINT('',(3.938375,-1.66,0.105));+#17152 = VECTOR('',#17153,1.);+#17153 = DIRECTION('',(1.,0.,0.));+#17154 = PCURVE('',#16881,#17155);+#17155 = DEFINITIONAL_REPRESENTATION('',(#17156),#17160);+#17156 = LINE('',#17157,#17158);+#17157 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#17158 = VECTOR('',#17159,1.);+#17159 = DIRECTION('',(0.,1.));+#17160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17161 = PCURVE('',#17162,#17167);+#17162 = PLANE('',#17163);+#17163 = AXIS2_PLACEMENT_3D('',#17164,#17165,#17166);+#17164 = CARTESIAN_POINT('',(3.99529407561,-1.75,0.105));+#17165 = DIRECTION('',(0.,0.,1.));+#17166 = DIRECTION('',(1.,0.,0.));+#17167 = DEFINITIONAL_REPRESENTATION('',(#17168),#17172);+#17168 = LINE('',#17169,#17170);+#17169 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#17170 = VECTOR('',#17171,1.);+#17171 = DIRECTION('',(1.,0.));+#17172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17173 = ORIENTED_EDGE('',*,*,#17174,.T.);+#17174 = EDGE_CURVE('',#17147,#17175,#17177,.T.);+#17175 = VERTEX_POINT('',#17176);+#17176 = CARTESIAN_POINT('',(4.43,-1.66,0.));+#17177 = SURFACE_CURVE('',#17178,(#17182,#17189),.PCURVE_S1.);+#17178 = LINE('',#17179,#17180);+#17179 = CARTESIAN_POINT('',(4.43,-1.66,-8.142959240193E-02));+#17180 = VECTOR('',#17181,1.);+#17181 = DIRECTION('',(0.,0.,-1.));+#17182 = PCURVE('',#16881,#17183);+#17183 = DEFINITIONAL_REPRESENTATION('',(#17184),#17188);+#17184 = LINE('',#17185,#17186);+#17185 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#17186 = VECTOR('',#17187,1.);+#17187 = DIRECTION('',(-1.,0.));+#17188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17189 = PCURVE('',#17190,#17195);+#17190 = PLANE('',#17191);+#17191 = AXIS2_PLACEMENT_3D('',#17192,#17193,#17194);+#17192 = CARTESIAN_POINT('',(4.43,-2.34,-0.5));+#17193 = DIRECTION('',(1.,0.,0.));+#17194 = DIRECTION('',(0.,0.,1.));+#17195 = DEFINITIONAL_REPRESENTATION('',(#17196),#17200);+#17196 = LINE('',#17197,#17198);+#17197 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#17198 = VECTOR('',#17199,1.);+#17199 = DIRECTION('',(-1.,0.));+#17200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17201 = ORIENTED_EDGE('',*,*,#17202,.F.);+#17202 = EDGE_CURVE('',#17203,#17175,#17205,.T.);+#17203 = VERTEX_POINT('',#17204);+#17204 = CARTESIAN_POINT('',(3.99529407561,-1.66,0.));+#17205 = SURFACE_CURVE('',#17206,(#17210,#17217),.PCURVE_S1.);+#17206 = LINE('',#17207,#17208);+#17207 = CARTESIAN_POINT('',(3.938375,-1.66,0.));+#17208 = VECTOR('',#17209,1.);+#17209 = DIRECTION('',(1.,0.,0.));+#17210 = PCURVE('',#16881,#17211);+#17211 = DEFINITIONAL_REPRESENTATION('',(#17212),#17216);+#17212 = LINE('',#17213,#17214);+#17213 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#17214 = VECTOR('',#17215,1.);+#17215 = DIRECTION('',(0.,1.));+#17216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17217 = PCURVE('',#17218,#17223);+#17218 = PLANE('',#17219);+#17219 = AXIS2_PLACEMENT_3D('',#17220,#17221,#17222);+#17220 = CARTESIAN_POINT('',(3.99529407561,-1.75,0.));+#17221 = DIRECTION('',(0.,0.,1.));+#17222 = DIRECTION('',(1.,0.,0.));+#17223 = DEFINITIONAL_REPRESENTATION('',(#17224),#17228);+#17224 = LINE('',#17225,#17226);+#17225 = CARTESIAN_POINT('',(-5.691907561E-02,9.E-02));+#17226 = VECTOR('',#17227,1.);+#17227 = DIRECTION('',(1.,0.));+#17228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17229 = ORIENTED_EDGE('',*,*,#17230,.T.);+#17230 = EDGE_CURVE('',#17203,#17231,#17233,.T.);+#17231 = VERTEX_POINT('',#17232);+#17232 = CARTESIAN_POINT('',(3.865353350249,-1.66,7.826567165848E-02));+#17233 = SURFACE_CURVE('',#17234,(#17239,#17246),.PCURVE_S1.);+#17234 = CIRCLE('',#17235,0.147);+#17235 = AXIS2_PLACEMENT_3D('',#17236,#17237,#17238);+#17236 = CARTESIAN_POINT('',(3.99529407561,-1.66,0.147));+#17237 = DIRECTION('',(0.,1.,0.));+#17238 = DIRECTION('',(0.,0.,1.));+#17239 = PCURVE('',#16881,#17240);+#17240 = DEFINITIONAL_REPRESENTATION('',(#17241),#17245);+#17241 = CIRCLE('',#17242,0.147);+#17242 = AXIS2_PLACEMENT_2D('',#17243,#17244);+#17243 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#17244 = DIRECTION('',(1.,0.));+#17245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17246 = PCURVE('',#17247,#17252);+#17247 = CYLINDRICAL_SURFACE('',#17248,0.147);+#17248 = AXIS2_PLACEMENT_3D('',#17249,#17250,#17251);+#17249 = CARTESIAN_POINT('',(3.99529407561,-1.75,0.147));+#17250 = DIRECTION('',(0.,1.,0.));+#17251 = DIRECTION('',(0.,0.,1.));+#17252 = DEFINITIONAL_REPRESENTATION('',(#17253),#17257);+#17253 = LINE('',#17254,#17255);+#17254 = CARTESIAN_POINT('',(-0.,9.E-02));+#17255 = VECTOR('',#17256,1.);+#17256 = DIRECTION('',(1.,-0.));+#17257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17258 = ORIENTED_EDGE('',*,*,#17259,.F.);+#17259 = EDGE_CURVE('',#17260,#17231,#17262,.T.);+#17260 = VERTEX_POINT('',#17261);+#17261 = CARTESIAN_POINT('',(3.560206845921,-1.66,0.655138379526));+#17262 = SURFACE_CURVE('',#17263,(#17267,#17274),.PCURVE_S1.);+#17263 = LINE('',#17264,#17265);+#17264 = CARTESIAN_POINT('',(3.533592598085,-1.66,0.705452025592));+#17265 = VECTOR('',#17266,1.);+#17266 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#17267 = PCURVE('',#16881,#17268);+#17268 = DEFINITIONAL_REPRESENTATION('',(#17269),#17273);+#17269 = LINE('',#17270,#17271);+#17270 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#17271 = VECTOR('',#17272,1.);+#17272 = DIRECTION('',(-0.883950512662,0.467580464908));+#17273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17274 = PCURVE('',#17275,#17280);+#17275 = PLANE('',#17276);+#17276 = AXIS2_PLACEMENT_3D('',#17277,#17278,#17279);+#17277 = CARTESIAN_POINT('',(3.560206845921,-1.75,0.655138379526));+#17278 = DIRECTION('',(0.883950512662,0.,0.467580464908));+#17279 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#17280 = DEFINITIONAL_REPRESENTATION('',(#17281),#17285);+#17281 = LINE('',#17282,#17283);+#17282 = CARTESIAN_POINT('',(-5.69190756103E-02,9.E-02));+#17283 = VECTOR('',#17284,1.);+#17284 = DIRECTION('',(1.,0.));+#17285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17286 = ORIENTED_EDGE('',*,*,#17287,.F.);+#17287 = EDGE_CURVE('',#17288,#17260,#17290,.T.);+#17288 = VERTEX_POINT('',#17289);+#17289 = CARTESIAN_POINT('',(3.52308092439,-1.66,0.6775));+#17290 = SURFACE_CURVE('',#17291,(#17296,#17303),.PCURVE_S1.);+#17291 = CIRCLE('',#17292,4.2E-02);+#17292 = AXIS2_PLACEMENT_3D('',#17293,#17294,#17295);+#17293 = CARTESIAN_POINT('',(3.52308092439,-1.66,0.6355));+#17294 = DIRECTION('',(0.,1.,0.));+#17295 = DIRECTION('',(0.,0.,1.));+#17296 = PCURVE('',#16881,#17297);+#17297 = DEFINITIONAL_REPRESENTATION('',(#17298),#17302);+#17298 = CIRCLE('',#17299,4.2E-02);+#17299 = AXIS2_PLACEMENT_2D('',#17300,#17301);+#17300 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#17301 = DIRECTION('',(1.,0.));+#17302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17303 = PCURVE('',#17304,#17309);+#17304 = CYLINDRICAL_SURFACE('',#17305,4.2E-02);+#17305 = AXIS2_PLACEMENT_3D('',#17306,#17307,#17308);+#17306 = CARTESIAN_POINT('',(3.52308092439,-1.75,0.6355));+#17307 = DIRECTION('',(0.,1.,0.));+#17308 = DIRECTION('',(0.,0.,1.));+#17309 = DEFINITIONAL_REPRESENTATION('',(#17310),#17314);+#17310 = LINE('',#17311,#17312);+#17311 = CARTESIAN_POINT('',(-4.138911435803E-13,9.E-02));+#17312 = VECTOR('',#17313,1.);+#17313 = DIRECTION('',(1.,-0.));+#17314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17315 = ORIENTED_EDGE('',*,*,#17316,.F.);+#17316 = EDGE_CURVE('',#17317,#17288,#17319,.T.);+#17317 = VERTEX_POINT('',#17318);+#17318 = CARTESIAN_POINT('',(3.25,-1.66,0.6775));+#17319 = SURFACE_CURVE('',#17320,(#17324,#17331),.PCURVE_S1.);+#17320 = LINE('',#17321,#17322);+#17321 = CARTESIAN_POINT('',(3.25,-1.66,0.6775));+#17322 = VECTOR('',#17323,1.);+#17323 = DIRECTION('',(1.,0.,0.));+#17324 = PCURVE('',#16881,#17325);+#17325 = DEFINITIONAL_REPRESENTATION('',(#17326),#17330);+#17326 = LINE('',#17327,#17328);+#17327 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#17328 = VECTOR('',#17329,1.);+#17329 = DIRECTION('',(0.,1.));+#17330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17331 = PCURVE('',#17332,#17337);+#17332 = PLANE('',#17333);+#17333 = AXIS2_PLACEMENT_3D('',#17334,#17335,#17336);+#17334 = CARTESIAN_POINT('',(3.25,-1.75,0.6775));+#17335 = DIRECTION('',(0.,0.,1.));+#17336 = DIRECTION('',(1.,0.,0.));+#17337 = DEFINITIONAL_REPRESENTATION('',(#17338),#17342);+#17338 = LINE('',#17339,#17340);+#17339 = CARTESIAN_POINT('',(0.,9.E-02));+#17340 = VECTOR('',#17341,1.);+#17341 = DIRECTION('',(1.,0.));+#17342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17343 = ORIENTED_EDGE('',*,*,#17344,.F.);+#17344 = EDGE_CURVE('',#17345,#17317,#17347,.T.);+#17345 = VERTEX_POINT('',#17346);+#17346 = CARTESIAN_POINT('',(3.2,-1.66,0.713992189406));+#17347 = SURFACE_CURVE('',#17348,(#17353,#17364),.PCURVE_S1.);+#17348 = CIRCLE('',#17349,5.25E-02);+#17349 = AXIS2_PLACEMENT_3D('',#17350,#17351,#17352);+#17350 = CARTESIAN_POINT('',(3.25,-1.66,0.73));+#17351 = DIRECTION('',(0.,-1.,0.));+#17352 = DIRECTION('',(1.,0.,0.));+#17353 = PCURVE('',#16881,#17354);+#17354 = DEFINITIONAL_REPRESENTATION('',(#17355),#17363);+#17355 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17356,#17357,#17358,#17359+ ,#17360,#17361,#17362),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17356 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#17357 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#17358 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#17359 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#17360 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#17361 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#17362 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#17363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17364 = PCURVE('',#17365,#17370);+#17365 = CYLINDRICAL_SURFACE('',#17366,5.25E-02);+#17366 = AXIS2_PLACEMENT_3D('',#17367,#17368,#17369);+#17367 = CARTESIAN_POINT('',(3.25,-1.75,0.73));+#17368 = DIRECTION('',(0.,1.,0.));+#17369 = DIRECTION('',(1.,0.,0.));+#17370 = DEFINITIONAL_REPRESENTATION('',(#17371),#17375);+#17371 = LINE('',#17372,#17373);+#17372 = CARTESIAN_POINT('',(6.28318530718,9.E-02));+#17373 = VECTOR('',#17374,1.);+#17374 = DIRECTION('',(-1.,-0.));+#17375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17376 = ORIENTED_EDGE('',*,*,#17377,.F.);+#17377 = EDGE_CURVE('',#16860,#17345,#17378,.T.);+#17378 = SURFACE_CURVE('',#17379,(#17383,#17390),.PCURVE_S1.);+#17379 = LINE('',#17380,#17381);+#17380 = CARTESIAN_POINT('',(3.2,-1.66,-8.142959240193E-02));+#17381 = VECTOR('',#17382,1.);+#17382 = DIRECTION('',(0.,0.,-1.));+#17383 = PCURVE('',#16881,#17384);+#17384 = DEFINITIONAL_REPRESENTATION('',(#17385),#17389);+#17385 = LINE('',#17386,#17387);+#17386 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#17387 = VECTOR('',#17388,1.);+#17388 = DIRECTION('',(-1.,0.));+#17389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17390 = PCURVE('',#16913,#17391);+#17391 = DEFINITIONAL_REPRESENTATION('',(#17392),#17396);+#17392 = LINE('',#17393,#17394);+#17393 = CARTESIAN_POINT('',(0.418570407598,-0.68));+#17394 = VECTOR('',#17395,1.);+#17395 = DIRECTION('',(-1.,0.));+#17396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17397 = ADVANCED_FACE('',(#17398),#16913,.F.);+#17398 = FACE_BOUND('',#17399,.F.);+#17399 = EDGE_LOOP('',(#17400,#17401,#17424,#17445));+#17400 = ORIENTED_EDGE('',*,*,#16897,.F.);+#17401 = ORIENTED_EDGE('',*,*,#17402,.T.);+#17402 = EDGE_CURVE('',#16898,#17403,#17405,.T.);+#17403 = VERTEX_POINT('',#17404);+#17404 = CARTESIAN_POINT('',(3.2,-1.84,0.713992189406));+#17405 = SURFACE_CURVE('',#17406,(#17410,#17417),.PCURVE_S1.);+#17406 = LINE('',#17407,#17408);+#17407 = CARTESIAN_POINT('',(3.2,-1.84,-8.142959240193E-02));+#17408 = VECTOR('',#17409,1.);+#17409 = DIRECTION('',(0.,0.,-1.));+#17410 = PCURVE('',#16913,#17411);+#17411 = DEFINITIONAL_REPRESENTATION('',(#17412),#17416);+#17412 = LINE('',#17413,#17414);+#17413 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#17414 = VECTOR('',#17415,1.);+#17415 = DIRECTION('',(-1.,0.));+#17416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17417 = PCURVE('',#16942,#17418);+#17418 = DEFINITIONAL_REPRESENTATION('',(#17419),#17423);+#17419 = LINE('',#17420,#17421);+#17420 = CARTESIAN_POINT('',(-0.418570407598,-0.661815252728));+#17421 = VECTOR('',#17422,1.);+#17422 = DIRECTION('',(-1.,0.));+#17423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17424 = ORIENTED_EDGE('',*,*,#17425,.T.);+#17425 = EDGE_CURVE('',#17403,#17345,#17426,.T.);+#17426 = SURFACE_CURVE('',#17427,(#17431,#17438),.PCURVE_S1.);+#17427 = LINE('',#17428,#17429);+#17428 = CARTESIAN_POINT('',(3.2,-1.75,0.713992189406));+#17429 = VECTOR('',#17430,1.);+#17430 = DIRECTION('',(0.,1.,0.));+#17431 = PCURVE('',#16913,#17432);+#17432 = DEFINITIONAL_REPRESENTATION('',(#17433),#17437);+#17433 = LINE('',#17434,#17435);+#17434 = CARTESIAN_POINT('',(1.213992189406,-0.59));+#17435 = VECTOR('',#17436,1.);+#17436 = DIRECTION('',(0.,-1.));+#17437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17438 = PCURVE('',#17365,#17439);+#17439 = DEFINITIONAL_REPRESENTATION('',(#17440),#17444);+#17440 = LINE('',#17441,#17442);+#17441 = CARTESIAN_POINT('',(2.831748013849,0.));+#17442 = VECTOR('',#17443,1.);+#17443 = DIRECTION('',(-0.,1.));+#17444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17445 = ORIENTED_EDGE('',*,*,#17377,.F.);+#17446 = ADVANCED_FACE('',(#17447),#16942,.F.);+#17447 = FACE_BOUND('',#17448,.F.);+#17448 = EDGE_LOOP('',(#17449,#17450,#17451,#17475,#17498,#17522,#17545,+ #17568,#17591,#17615,#17638,#17662,#17685,#17711));+#17449 = ORIENTED_EDGE('',*,*,#16925,.F.);+#17450 = ORIENTED_EDGE('',*,*,#16988,.T.);+#17451 = ORIENTED_EDGE('',*,*,#17452,.T.);+#17452 = EDGE_CURVE('',#16989,#17453,#17455,.T.);+#17453 = VERTEX_POINT('',#17454);+#17454 = CARTESIAN_POINT('',(3.653021649751,-1.84,0.704234328342));+#17455 = SURFACE_CURVE('',#17456,(#17461,#17468),.PCURVE_S1.);+#17456 = CIRCLE('',#17457,0.147);+#17457 = AXIS2_PLACEMENT_3D('',#17458,#17459,#17460);+#17458 = CARTESIAN_POINT('',(3.52308092439,-1.84,0.6355));+#17459 = DIRECTION('',(0.,1.,0.));+#17460 = DIRECTION('',(0.,0.,1.));+#17461 = PCURVE('',#16942,#17462);+#17462 = DEFINITIONAL_REPRESENTATION('',(#17463),#17467);+#17463 = CIRCLE('',#17464,0.147);+#17464 = AXIS2_PLACEMENT_2D('',#17465,#17466);+#17465 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#17466 = DIRECTION('',(1.,0.));+#17467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17468 = PCURVE('',#17027,#17469);+#17469 = DEFINITIONAL_REPRESENTATION('',(#17470),#17474);+#17470 = LINE('',#17471,#17472);+#17471 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#17472 = VECTOR('',#17473,1.);+#17473 = DIRECTION('',(1.,0.));+#17474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17475 = ORIENTED_EDGE('',*,*,#17476,.T.);+#17476 = EDGE_CURVE('',#17453,#17477,#17479,.T.);+#17477 = VERTEX_POINT('',#17478);+#17478 = CARTESIAN_POINT('',(3.958168154079,-1.84,0.127361620474));+#17479 = SURFACE_CURVE('',#17480,(#17484,#17491),.PCURVE_S1.);+#17480 = LINE('',#17481,#17482);+#17481 = CARTESIAN_POINT('',(3.626407401915,-1.84,0.754547974408));+#17482 = VECTOR('',#17483,1.);+#17483 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#17484 = PCURVE('',#16942,#17485);+#17485 = DEFINITIONAL_REPRESENTATION('',(#17486),#17490);+#17486 = LINE('',#17487,#17488);+#17487 = CARTESIAN_POINT('',(0.417407159212,-0.235407850813));+#17488 = VECTOR('',#17489,1.);+#17489 = DIRECTION('',(-0.883950512662,0.467580464908));+#17490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17491 = PCURVE('',#17105,#17492);+#17492 = DEFINITIONAL_REPRESENTATION('',(#17493),#17497);+#17493 = LINE('',#17494,#17495);+#17494 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#17495 = VECTOR('',#17496,1.);+#17496 = DIRECTION('',(1.,0.));+#17497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17498 = ORIENTED_EDGE('',*,*,#17499,.F.);+#17499 = EDGE_CURVE('',#17500,#17477,#17502,.T.);+#17500 = VERTEX_POINT('',#17501);+#17501 = CARTESIAN_POINT('',(3.99529407561,-1.84,0.105));+#17502 = SURFACE_CURVE('',#17503,(#17508,#17515),.PCURVE_S1.);+#17503 = CIRCLE('',#17504,4.2E-02);+#17504 = AXIS2_PLACEMENT_3D('',#17505,#17506,#17507);+#17505 = CARTESIAN_POINT('',(3.99529407561,-1.84,0.147));+#17506 = DIRECTION('',(0.,1.,0.));+#17507 = DIRECTION('',(0.,0.,1.));+#17508 = PCURVE('',#16942,#17509);+#17509 = DEFINITIONAL_REPRESENTATION('',(#17510),#17514);+#17510 = CIRCLE('',#17511,4.2E-02);+#17511 = AXIS2_PLACEMENT_2D('',#17512,#17513);+#17512 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#17513 = DIRECTION('',(1.,0.));+#17514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17515 = PCURVE('',#17134,#17516);+#17516 = DEFINITIONAL_REPRESENTATION('',(#17517),#17521);+#17517 = LINE('',#17518,#17519);+#17518 = CARTESIAN_POINT('',(0.,-9.E-02));+#17519 = VECTOR('',#17520,1.);+#17520 = DIRECTION('',(1.,0.));+#17521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17522 = ORIENTED_EDGE('',*,*,#17523,.T.);+#17523 = EDGE_CURVE('',#17500,#17524,#17526,.T.);+#17524 = VERTEX_POINT('',#17525);+#17525 = CARTESIAN_POINT('',(4.43,-1.84,0.105));+#17526 = SURFACE_CURVE('',#17527,(#17531,#17538),.PCURVE_S1.);+#17527 = LINE('',#17528,#17529);+#17528 = CARTESIAN_POINT('',(3.938375,-1.84,0.105));+#17529 = VECTOR('',#17530,1.);+#17530 = DIRECTION('',(1.,0.,0.));+#17531 = PCURVE('',#16942,#17532);+#17532 = DEFINITIONAL_REPRESENTATION('',(#17533),#17537);+#17533 = LINE('',#17534,#17535);+#17534 = CARTESIAN_POINT('',(-0.232140815196,7.6559747272E-02));+#17535 = VECTOR('',#17536,1.);+#17536 = DIRECTION('',(0.,1.));+#17537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17538 = PCURVE('',#17162,#17539);+#17539 = DEFINITIONAL_REPRESENTATION('',(#17540),#17544);+#17540 = LINE('',#17541,#17542);+#17541 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#17542 = VECTOR('',#17543,1.);+#17543 = DIRECTION('',(1.,0.));+#17544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17545 = ORIENTED_EDGE('',*,*,#17546,.T.);+#17546 = EDGE_CURVE('',#17524,#17547,#17549,.T.);+#17547 = VERTEX_POINT('',#17548);+#17548 = CARTESIAN_POINT('',(4.43,-1.84,0.));+#17549 = SURFACE_CURVE('',#17550,(#17554,#17561),.PCURVE_S1.);+#17550 = LINE('',#17551,#17552);+#17551 = CARTESIAN_POINT('',(4.43,-1.84,-8.142959240193E-02));+#17552 = VECTOR('',#17553,1.);+#17553 = DIRECTION('',(0.,0.,-1.));+#17554 = PCURVE('',#16942,#17555);+#17555 = DEFINITIONAL_REPRESENTATION('',(#17556),#17560);+#17556 = LINE('',#17557,#17558);+#17557 = CARTESIAN_POINT('',(-0.418570407598,0.568184747272));+#17558 = VECTOR('',#17559,1.);+#17559 = DIRECTION('',(-1.,0.));+#17560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17561 = PCURVE('',#17190,#17562);+#17562 = DEFINITIONAL_REPRESENTATION('',(#17563),#17567);+#17563 = LINE('',#17564,#17565);+#17564 = CARTESIAN_POINT('',(0.418570407598,-0.5));+#17565 = VECTOR('',#17566,1.);+#17566 = DIRECTION('',(-1.,0.));+#17567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17568 = ORIENTED_EDGE('',*,*,#17569,.F.);+#17569 = EDGE_CURVE('',#17570,#17547,#17572,.T.);+#17570 = VERTEX_POINT('',#17571);+#17571 = CARTESIAN_POINT('',(3.99529407561,-1.84,0.));+#17572 = SURFACE_CURVE('',#17573,(#17577,#17584),.PCURVE_S1.);+#17573 = LINE('',#17574,#17575);+#17574 = CARTESIAN_POINT('',(3.938375,-1.84,0.));+#17575 = VECTOR('',#17576,1.);+#17576 = DIRECTION('',(1.,0.,0.));+#17577 = PCURVE('',#16942,#17578);+#17578 = DEFINITIONAL_REPRESENTATION('',(#17579),#17583);+#17579 = LINE('',#17580,#17581);+#17580 = CARTESIAN_POINT('',(-0.337140815196,7.6559747272E-02));+#17581 = VECTOR('',#17582,1.);+#17582 = DIRECTION('',(0.,1.));+#17583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17584 = PCURVE('',#17218,#17585);+#17585 = DEFINITIONAL_REPRESENTATION('',(#17586),#17590);+#17586 = LINE('',#17587,#17588);+#17587 = CARTESIAN_POINT('',(-5.691907561E-02,-9.E-02));+#17588 = VECTOR('',#17589,1.);+#17589 = DIRECTION('',(1.,0.));+#17590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17591 = ORIENTED_EDGE('',*,*,#17592,.T.);+#17592 = EDGE_CURVE('',#17570,#17593,#17595,.T.);+#17593 = VERTEX_POINT('',#17594);+#17594 = CARTESIAN_POINT('',(3.865353350249,-1.84,7.826567165848E-02));+#17595 = SURFACE_CURVE('',#17596,(#17601,#17608),.PCURVE_S1.);+#17596 = CIRCLE('',#17597,0.147);+#17597 = AXIS2_PLACEMENT_3D('',#17598,#17599,#17600);+#17598 = CARTESIAN_POINT('',(3.99529407561,-1.84,0.147));+#17599 = DIRECTION('',(0.,1.,0.));+#17600 = DIRECTION('',(0.,0.,1.));+#17601 = PCURVE('',#16942,#17602);+#17602 = DEFINITIONAL_REPRESENTATION('',(#17603),#17607);+#17603 = CIRCLE('',#17604,0.147);+#17604 = AXIS2_PLACEMENT_2D('',#17605,#17606);+#17605 = CARTESIAN_POINT('',(-0.190140815196,0.133478822882));+#17606 = DIRECTION('',(1.,0.));+#17607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17608 = PCURVE('',#17247,#17609);+#17609 = DEFINITIONAL_REPRESENTATION('',(#17610),#17614);+#17610 = LINE('',#17611,#17612);+#17611 = CARTESIAN_POINT('',(0.,-9.E-02));+#17612 = VECTOR('',#17613,1.);+#17613 = DIRECTION('',(1.,0.));+#17614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17615 = ORIENTED_EDGE('',*,*,#17616,.F.);+#17616 = EDGE_CURVE('',#17617,#17593,#17619,.T.);+#17617 = VERTEX_POINT('',#17618);+#17618 = CARTESIAN_POINT('',(3.560206845921,-1.84,0.655138379526));+#17619 = SURFACE_CURVE('',#17620,(#17624,#17631),.PCURVE_S1.);+#17620 = LINE('',#17621,#17622);+#17621 = CARTESIAN_POINT('',(3.533592598085,-1.84,0.705452025592));+#17622 = VECTOR('',#17623,1.);+#17623 = DIRECTION('',(0.467580464908,0.,-0.883950512662));+#17624 = PCURVE('',#16942,#17625);+#17625 = DEFINITIONAL_REPRESENTATION('',(#17626),#17630);+#17626 = LINE('',#17627,#17628);+#17627 = CARTESIAN_POINT('',(0.368311210396,-0.328222654643));+#17628 = VECTOR('',#17629,1.);+#17629 = DIRECTION('',(-0.883950512662,0.467580464908));+#17630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17631 = PCURVE('',#17275,#17632);+#17632 = DEFINITIONAL_REPRESENTATION('',(#17633),#17637);+#17633 = LINE('',#17634,#17635);+#17634 = CARTESIAN_POINT('',(-5.69190756103E-02,-9.E-02));+#17635 = VECTOR('',#17636,1.);+#17636 = DIRECTION('',(1.,0.));+#17637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17638 = ORIENTED_EDGE('',*,*,#17639,.F.);+#17639 = EDGE_CURVE('',#17640,#17617,#17642,.T.);+#17640 = VERTEX_POINT('',#17641);+#17641 = CARTESIAN_POINT('',(3.52308092439,-1.84,0.6775));+#17642 = SURFACE_CURVE('',#17643,(#17648,#17655),.PCURVE_S1.);+#17643 = CIRCLE('',#17644,4.2E-02);+#17644 = AXIS2_PLACEMENT_3D('',#17645,#17646,#17647);+#17645 = CARTESIAN_POINT('',(3.52308092439,-1.84,0.6355));+#17646 = DIRECTION('',(0.,1.,0.));+#17647 = DIRECTION('',(0.,0.,1.));+#17648 = PCURVE('',#16942,#17649);+#17649 = DEFINITIONAL_REPRESENTATION('',(#17650),#17654);+#17650 = CIRCLE('',#17651,4.2E-02);+#17651 = AXIS2_PLACEMENT_2D('',#17652,#17653);+#17652 = CARTESIAN_POINT('',(0.298359184804,-0.338734328338));+#17653 = DIRECTION('',(1.,0.));+#17654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17655 = PCURVE('',#17304,#17656);+#17656 = DEFINITIONAL_REPRESENTATION('',(#17657),#17661);+#17657 = LINE('',#17658,#17659);+#17658 = CARTESIAN_POINT('',(-4.138911435803E-13,-9.E-02));+#17659 = VECTOR('',#17660,1.);+#17660 = DIRECTION('',(1.,0.));+#17661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17662 = ORIENTED_EDGE('',*,*,#17663,.F.);+#17663 = EDGE_CURVE('',#17664,#17640,#17666,.T.);+#17664 = VERTEX_POINT('',#17665);+#17665 = CARTESIAN_POINT('',(3.25,-1.84,0.6775));+#17666 = SURFACE_CURVE('',#17667,(#17671,#17678),.PCURVE_S1.);+#17667 = LINE('',#17668,#17669);+#17668 = CARTESIAN_POINT('',(3.25,-1.84,0.6775));+#17669 = VECTOR('',#17670,1.);+#17670 = DIRECTION('',(1.,0.,0.));+#17671 = PCURVE('',#16942,#17672);+#17672 = DEFINITIONAL_REPRESENTATION('',(#17673),#17677);+#17673 = LINE('',#17674,#17675);+#17674 = CARTESIAN_POINT('',(0.340359184804,-0.611815252728));+#17675 = VECTOR('',#17676,1.);+#17676 = DIRECTION('',(0.,1.));+#17677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17678 = PCURVE('',#17332,#17679);+#17679 = DEFINITIONAL_REPRESENTATION('',(#17680),#17684);+#17680 = LINE('',#17681,#17682);+#17681 = CARTESIAN_POINT('',(0.,-9.E-02));+#17682 = VECTOR('',#17683,1.);+#17683 = DIRECTION('',(1.,0.));+#17684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17685 = ORIENTED_EDGE('',*,*,#17686,.F.);+#17686 = EDGE_CURVE('',#17403,#17664,#17687,.T.);+#17687 = SURFACE_CURVE('',#17688,(#17693,#17704),.PCURVE_S1.);+#17688 = CIRCLE('',#17689,5.25E-02);+#17689 = AXIS2_PLACEMENT_3D('',#17690,#17691,#17692);+#17690 = CARTESIAN_POINT('',(3.25,-1.84,0.73));+#17691 = DIRECTION('',(0.,-1.,0.));+#17692 = DIRECTION('',(1.,0.,0.));+#17693 = PCURVE('',#16942,#17694);+#17694 = DEFINITIONAL_REPRESENTATION('',(#17695),#17703);+#17695 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17696,#17697,#17698,#17699+ ,#17700,#17701,#17702),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0.,+ 2.094395102393,4.188790204786,6.28318530718,8.377580409573),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#17696 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#17697 = CARTESIAN_POINT('',(0.483791852201,-0.559315252728));+#17698 = CARTESIAN_POINT('',(0.438325518503,-0.638065252728));+#17699 = CARTESIAN_POINT('',(0.392859184804,-0.716815252728));+#17700 = CARTESIAN_POINT('',(0.347392851105,-0.638065252728));+#17701 = CARTESIAN_POINT('',(0.301926517407,-0.559315252728));+#17702 = CARTESIAN_POINT('',(0.392859184804,-0.559315252728));+#17703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17704 = PCURVE('',#17365,#17705);+#17705 = DEFINITIONAL_REPRESENTATION('',(#17706),#17710);+#17706 = LINE('',#17707,#17708);+#17707 = CARTESIAN_POINT('',(6.28318530718,-9.E-02));+#17708 = VECTOR('',#17709,1.);+#17709 = DIRECTION('',(-1.,0.));+#17710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17711 = ORIENTED_EDGE('',*,*,#17402,.F.);+#17712 = ADVANCED_FACE('',(#17713),#17027,.T.);+#17713 = FACE_BOUND('',#17714,.T.);+#17714 = EDGE_LOOP('',(#17715,#17716,#17717,#17738));+#17715 = ORIENTED_EDGE('',*,*,#17011,.F.);+#17716 = ORIENTED_EDGE('',*,*,#17452,.T.);+#17717 = ORIENTED_EDGE('',*,*,#17718,.T.);+#17718 = EDGE_CURVE('',#17453,#17066,#17719,.T.);+#17719 = SURFACE_CURVE('',#17720,(#17724,#17731),.PCURVE_S1.);+#17720 = LINE('',#17721,#17722);+#17721 = CARTESIAN_POINT('',(3.653021649751,-1.84,0.704234328342));+#17722 = VECTOR('',#17723,1.);+#17723 = DIRECTION('',(0.,1.,0.));+#17724 = PCURVE('',#17027,#17725);+#17725 = DEFINITIONAL_REPRESENTATION('',(#17726),#17730);+#17726 = LINE('',#17727,#17728);+#17727 = CARTESIAN_POINT('',(1.084244720518,-9.E-02));+#17728 = VECTOR('',#17729,1.);+#17729 = DIRECTION('',(-0.,1.));+#17730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17731 = PCURVE('',#17105,#17732);+#17732 = DEFINITIONAL_REPRESENTATION('',(#17733),#17737);+#17733 = LINE('',#17734,#17735);+#17734 = CARTESIAN_POINT('',(0.,-9.E-02));+#17735 = VECTOR('',#17736,1.);+#17736 = DIRECTION('',(0.,1.));+#17737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17738 = ORIENTED_EDGE('',*,*,#17065,.F.);+#17739 = ADVANCED_FACE('',(#17740),#17365,.T.);+#17740 = FACE_BOUND('',#17741,.T.);+#17741 = EDGE_LOOP('',(#17742,#17743,#17764,#17765));+#17742 = ORIENTED_EDGE('',*,*,#17344,.T.);+#17743 = ORIENTED_EDGE('',*,*,#17744,.T.);+#17744 = EDGE_CURVE('',#17317,#17664,#17745,.T.);+#17745 = SURFACE_CURVE('',#17746,(#17750,#17757),.PCURVE_S1.);+#17746 = LINE('',#17747,#17748);+#17747 = CARTESIAN_POINT('',(3.25,-1.66,0.6775));+#17748 = VECTOR('',#17749,1.);+#17749 = DIRECTION('',(0.,-1.,0.));+#17750 = PCURVE('',#17365,#17751);+#17751 = DEFINITIONAL_REPRESENTATION('',(#17752),#17756);+#17752 = LINE('',#17753,#17754);+#17753 = CARTESIAN_POINT('',(1.570796326795,9.E-02));+#17754 = VECTOR('',#17755,1.);+#17755 = DIRECTION('',(-0.,-1.));+#17756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17757 = PCURVE('',#17332,#17758);+#17758 = DEFINITIONAL_REPRESENTATION('',(#17759),#17763);+#17759 = LINE('',#17760,#17761);+#17760 = CARTESIAN_POINT('',(0.,9.E-02));+#17761 = VECTOR('',#17762,1.);+#17762 = DIRECTION('',(0.,-1.));+#17763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17764 = ORIENTED_EDGE('',*,*,#17686,.F.);+#17765 = ORIENTED_EDGE('',*,*,#17425,.T.);+#17766 = ADVANCED_FACE('',(#17767),#17332,.F.);+#17767 = FACE_BOUND('',#17768,.F.);+#17768 = EDGE_LOOP('',(#17769,#17770,#17791,#17792));+#17769 = ORIENTED_EDGE('',*,*,#17663,.T.);+#17770 = ORIENTED_EDGE('',*,*,#17771,.F.);+#17771 = EDGE_CURVE('',#17288,#17640,#17772,.T.);+#17772 = SURFACE_CURVE('',#17773,(#17777,#17784),.PCURVE_S1.);+#17773 = LINE('',#17774,#17775);+#17774 = CARTESIAN_POINT('',(3.52308092439,-1.66,0.6775));+#17775 = VECTOR('',#17776,1.);+#17776 = DIRECTION('',(0.,-1.,0.));+#17777 = PCURVE('',#17332,#17778);+#17778 = DEFINITIONAL_REPRESENTATION('',(#17779),#17783);+#17779 = LINE('',#17780,#17781);+#17780 = CARTESIAN_POINT('',(0.27308092439,9.E-02));+#17781 = VECTOR('',#17782,1.);+#17782 = DIRECTION('',(0.,-1.));+#17783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17784 = PCURVE('',#17304,#17785);+#17785 = DEFINITIONAL_REPRESENTATION('',(#17786),#17790);+#17786 = LINE('',#17787,#17788);+#17787 = CARTESIAN_POINT('',(0.,9.E-02));+#17788 = VECTOR('',#17789,1.);+#17789 = DIRECTION('',(0.,-1.));+#17790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17791 = ORIENTED_EDGE('',*,*,#17316,.F.);+#17792 = ORIENTED_EDGE('',*,*,#17744,.T.);+#17793 = ADVANCED_FACE('',(#17794),#17304,.F.);+#17794 = FACE_BOUND('',#17795,.F.);+#17795 = EDGE_LOOP('',(#17796,#17797,#17818,#17819));+#17796 = ORIENTED_EDGE('',*,*,#17639,.T.);+#17797 = ORIENTED_EDGE('',*,*,#17798,.F.);+#17798 = EDGE_CURVE('',#17260,#17617,#17799,.T.);+#17799 = SURFACE_CURVE('',#17800,(#17804,#17811),.PCURVE_S1.);+#17800 = LINE('',#17801,#17802);+#17801 = CARTESIAN_POINT('',(3.560206845921,-1.66,0.655138379526));+#17802 = VECTOR('',#17803,1.);+#17803 = DIRECTION('',(0.,-1.,0.));+#17804 = PCURVE('',#17304,#17805);+#17805 = DEFINITIONAL_REPRESENTATION('',(#17806),#17810);+#17806 = LINE('',#17807,#17808);+#17807 = CARTESIAN_POINT('',(1.084244720518,9.E-02));+#17808 = VECTOR('',#17809,1.);+#17809 = DIRECTION('',(0.,-1.));+#17810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17811 = PCURVE('',#17275,#17812);+#17812 = DEFINITIONAL_REPRESENTATION('',(#17813),#17817);+#17813 = LINE('',#17814,#17815);+#17814 = CARTESIAN_POINT('',(0.,9.E-02));+#17815 = VECTOR('',#17816,1.);+#17816 = DIRECTION('',(0.,-1.));+#17817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17818 = ORIENTED_EDGE('',*,*,#17287,.F.);+#17819 = ORIENTED_EDGE('',*,*,#17771,.T.);+#17820 = ADVANCED_FACE('',(#17821),#17275,.F.);+#17821 = FACE_BOUND('',#17822,.F.);+#17822 = EDGE_LOOP('',(#17823,#17824,#17845,#17846));+#17823 = ORIENTED_EDGE('',*,*,#17616,.T.);+#17824 = ORIENTED_EDGE('',*,*,#17825,.F.);+#17825 = EDGE_CURVE('',#17231,#17593,#17826,.T.);+#17826 = SURFACE_CURVE('',#17827,(#17831,#17838),.PCURVE_S1.);+#17827 = LINE('',#17828,#17829);+#17828 = CARTESIAN_POINT('',(3.865353350249,-1.66,7.826567165848E-02));+#17829 = VECTOR('',#17830,1.);+#17830 = DIRECTION('',(0.,-1.,0.));+#17831 = PCURVE('',#17275,#17832);+#17832 = DEFINITIONAL_REPRESENTATION('',(#17833),#17837);+#17833 = LINE('',#17834,#17835);+#17834 = CARTESIAN_POINT('',(0.652607470219,9.E-02));+#17835 = VECTOR('',#17836,1.);+#17836 = DIRECTION('',(0.,-1.));+#17837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17838 = PCURVE('',#17247,#17839);+#17839 = DEFINITIONAL_REPRESENTATION('',(#17840),#17844);+#17840 = LINE('',#17841,#17842);+#17841 = CARTESIAN_POINT('',(4.225837374107,9.E-02));+#17842 = VECTOR('',#17843,1.);+#17843 = DIRECTION('',(0.,-1.));+#17844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17845 = ORIENTED_EDGE('',*,*,#17259,.F.);+#17846 = ORIENTED_EDGE('',*,*,#17798,.T.);+#17847 = ADVANCED_FACE('',(#17848),#17247,.T.);+#17848 = FACE_BOUND('',#17849,.T.);+#17849 = EDGE_LOOP('',(#17850,#17851,#17852,#17853));+#17850 = ORIENTED_EDGE('',*,*,#17592,.T.);+#17851 = ORIENTED_EDGE('',*,*,#17825,.F.);+#17852 = ORIENTED_EDGE('',*,*,#17230,.F.);+#17853 = ORIENTED_EDGE('',*,*,#17854,.T.);+#17854 = EDGE_CURVE('',#17203,#17570,#17855,.T.);+#17855 = SURFACE_CURVE('',#17856,(#17860,#17867),.PCURVE_S1.);+#17856 = LINE('',#17857,#17858);+#17857 = CARTESIAN_POINT('',(3.99529407561,-1.66,0.));+#17858 = VECTOR('',#17859,1.);+#17859 = DIRECTION('',(0.,-1.,0.));+#17860 = PCURVE('',#17247,#17861);+#17861 = DEFINITIONAL_REPRESENTATION('',(#17862),#17866);+#17862 = LINE('',#17863,#17864);+#17863 = CARTESIAN_POINT('',(3.14159265359,9.E-02));+#17864 = VECTOR('',#17865,1.);+#17865 = DIRECTION('',(0.,-1.));+#17866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17867 = PCURVE('',#17218,#17868);+#17868 = DEFINITIONAL_REPRESENTATION('',(#17869),#17873);+#17869 = LINE('',#17870,#17871);+#17870 = CARTESIAN_POINT('',(0.,9.E-02));+#17871 = VECTOR('',#17872,1.);+#17872 = DIRECTION('',(0.,-1.));+#17873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17874 = ADVANCED_FACE('',(#17875),#17218,.F.);+#17875 = FACE_BOUND('',#17876,.F.);+#17876 = EDGE_LOOP('',(#17877,#17878,#17879,#17900));+#17877 = ORIENTED_EDGE('',*,*,#17854,.T.);+#17878 = ORIENTED_EDGE('',*,*,#17569,.T.);+#17879 = ORIENTED_EDGE('',*,*,#17880,.T.);+#17880 = EDGE_CURVE('',#17547,#17175,#17881,.T.);+#17881 = SURFACE_CURVE('',#17882,(#17886,#17893),.PCURVE_S1.);+#17882 = LINE('',#17883,#17884);+#17883 = CARTESIAN_POINT('',(4.43,-2.045,0.));+#17884 = VECTOR('',#17885,1.);+#17885 = DIRECTION('',(0.,1.,0.));+#17886 = PCURVE('',#17218,#17887);+#17887 = DEFINITIONAL_REPRESENTATION('',(#17888),#17892);+#17888 = LINE('',#17889,#17890);+#17889 = CARTESIAN_POINT('',(0.43470592439,-0.295));+#17890 = VECTOR('',#17891,1.);+#17891 = DIRECTION('',(0.,1.));+#17892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17893 = PCURVE('',#17190,#17894);+#17894 = DEFINITIONAL_REPRESENTATION('',(#17895),#17899);+#17895 = LINE('',#17896,#17897);+#17896 = CARTESIAN_POINT('',(0.5,-0.295));+#17897 = VECTOR('',#17898,1.);+#17898 = DIRECTION('',(0.,-1.));+#17899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17900 = ORIENTED_EDGE('',*,*,#17202,.F.);+#17901 = ADVANCED_FACE('',(#17902),#17190,.T.);+#17902 = FACE_BOUND('',#17903,.T.);+#17903 = EDGE_LOOP('',(#17904,#17905,#17926,#17927));+#17904 = ORIENTED_EDGE('',*,*,#17174,.F.);+#17905 = ORIENTED_EDGE('',*,*,#17906,.F.);+#17906 = EDGE_CURVE('',#17524,#17147,#17907,.T.);+#17907 = SURFACE_CURVE('',#17908,(#17912,#17919),.PCURVE_S1.);+#17908 = LINE('',#17909,#17910);+#17909 = CARTESIAN_POINT('',(4.43,-2.045,0.105));+#17910 = VECTOR('',#17911,1.);+#17911 = DIRECTION('',(0.,1.,0.));+#17912 = PCURVE('',#17190,#17913);