Generated by kicad-footprint-generator · KiCad file format 20260206
STM32G071CBU6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)
STM32G071CBU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC13 | bidirectional | I/O port PC13 is a 5 V-tolerant FT pin supplied through the power switch, limited to about 3 mA sink and to 2 MHz output at 30 pF. |
| 2 | PC14-OSC32_IN | bidirectional | PC14 is a 5 V-tolerant FT GPIO that doubles as the 32.768 kHz oscillator input OSC32_IN, and it is supplied through the power switch. |
| 3 | PC15-OSC32_OUT | bidirectional | PC15 is a 5 V-tolerant FT GPIO that doubles as the 32.768 kHz oscillator output OSC32_OUT, and it is supplied through the power switch. |
| 4 | VBAT | power_in | VBAT is the backup supply for the RTC, TAMP, LSE and backup registers, specified at 1.55 V to 3.6 V when VDD is absent. |
| 5 | VREF+ | power_in | VREF+ is the analog reference input, which must equal VDDA when VDDA is below 2 V, and it can be grounded when analog peripherals are inactive. |
| 6 | VDD/VDDA | power_in | VDD/VDDA is the 1.7 V to 3.6 V digital supply that also feeds the analog supply VDDA (ADC/COMP 1.62 V min, DAC 1.8 V min, VREFBUF 2.4 V min). |
| 7 | VSS/VSSA | power_in | VSS/VSSA is the common ground for the digital and analog supply domains. |
| 8 | PF0-OSC_IN | bidirectional | PF0 is an FT GPIO that doubles as the HSE crystal oscillator input OSC_IN, and it also carries TIM14_CH1. |
| 9 | PF1-OSC_OUT | bidirectional | PF1 is an FT GPIO that doubles as the HSE crystal oscillator output OSC_OUT, and it also carries TIM15_CH1N and OSC_EN. |
| 10 | PF2-NRST | bidirectional | PF2 is an FT I/O that is also the bidirectional NRST reset pin with an embedded weak pull-up resistor, and it can output MCO. |
| 11 | PA0 | bidirectional | PA0 is a FT_a I/O with analog switch function that also provides ADC_IN0, WKUP1 and COMP1_OUT alternate outputs. |
| 12 | PA1 | bidirectional | PA1 is a FT_a I/O with analog switch function that also provides ADC_IN1, COMP1_INP and SPI1_SCK/I2S1_CK alternate functions. |
| 13 | PA2 | bidirectional | PA2 is a FT_a I/O with analog switch function that also provides ADC_IN2, COMP2_INM, WKUP4 and USART2_TX alternate functions. |
| 14 | PA3 | bidirectional | PA3 is a FT_a I/O with analog switch function that also provides ADC_IN3, COMP2_INP and USART2_RX alternate functions. |
| 15 | PA4 | bidirectional | PA4 is a TT_a I/O (3.6 V tolerant) with analog switch function that also provides ADC_IN4, DAC_OUT1 and RTC_OUT2. |
| 16 | PA5 | bidirectional | PA5 is a TT_a I/O (3.6 V tolerant) with analog switch function that also provides ADC_IN5 and DAC_OUT2 alternate outputs. |
| 17 | PA6 | bidirectional | PA6 is a FT_a I/O with analog switch function that also provides ADC_IN6 and COMP1_OUT alternate outputs. |
| 18 | PA7 | bidirectional | PA7 is a FT_a I/O with analog switch function that also provides ADC_IN7 and COMP2_OUT alternate outputs. |
| 19 | PB0 | bidirectional | PB0 is a FT_a I/O with analog switch function that also provides ADC_IN8 and COMP1_OUT alternate outputs. |
| 20 | PB1 | bidirectional | PB1 is a FT_a I/O with analog switch function that also provides ADC_IN9, COMP1_INM and LPUART1_RTS_DE alternate functions. |
| 21 | PB2 | bidirectional | PB2 is a FT_a I/O with analog switch function that also provides ADC_IN10, COMP1_INP and SPI2_MISO alternate functions. |
| 22 | PB10 | bidirectional | PB10 is a FT_fa I/O (Fm+ capable, with analog switch) that also provides ADC_IN11, I2C2_SCL and COMP1_OUT alternate functions. |
| 23 | PB11 | bidirectional | PB11 is a FT_fa I/O (Fm+ capable, with analog switch) that also provides ADC_IN15, I2C2_SDA and COMP2_OUT alternate functions. |
| 24 | PB12 | bidirectional | PB12 is a FT_a I/O with analog switch function that also provides ADC_IN16, SPI2_NSS and TIM1_BKIN alternate functions. |
| 25 | PB13 | bidirectional | PB13 is a FT_f I/O (Fm+ capable) that also provides SPI2_SCK, I2C2_SCL and TIM1_CH1N alternate functions. |
| 26 | PB14 | bidirectional | PB14 is a FT_f I/O (Fm+ capable) that also provides SPI2_MISO, I2C2_SDA and UCPD1_FRSTX alternate functions. |
| 27 | PB15 | bidirectional | PB15 is a FT_c I/O (USB Type-C PD capable) that also provides SPI2_MOSI, TIM1_CH3N and UCPD1_CC2 alternate functions. |
| 28 | PA8 | bidirectional | PA8 is a FT_c I/O (USB Type-C PD capable) that also provides MCO, SPI2_NSS, TIM1_CH1 and UCPD1_CC1 alternate functions. |
| 29 | PA9 | bidirectional | PA9 is a FT_fd I/O (Fm+ capable, USB Type-C dead battery) that also provides MCO, USART1_TX, TIM1_CH2 and I2C1_SCL alternate functions. |
| 30 | PC6 | bidirectional | PC6 is an FT I/O that also provides UCPD1_FRSTX, TIM3_CH1 and TIM2_CH3 alternate functions. |
| 31 | PC7 | bidirectional | PC7 is an FT I/O that also provides UCPD2_FRSTX, TIM3_CH2 and TIM2_CH4 alternate functions. |
| 32 | PA10 | bidirectional | PA10 is a FT_fd I/O (Fm+ capable, USB Type-C dead battery) that also provides SPI2_MOSI, USART1_RX, TIM1_CH3 and I2C1_SDA alternate functions. |
| 33 | PA11 [PA9] | bidirectional | PA11 is a FT_f I/O (Fm+ capable) that also provides SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4 and I2C2_SCL, and it can be remapped with PA9 through SYSCFG_CFGR1. |
| 34 | PA12 [PA10] | bidirectional | PA12 is a FT_f I/O (Fm+ capable) that also provides SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR and I2C2_SDA, and it can be remapped with PA10 through SYSCFG_CFGR1. |
| 35 | PA13 | bidirectional | PA13 is a FT I/O that carries the SWDIO serial-wire debug data line and has an internal pull-up enabled after reset. |
| 36 | PA14-BOOT0 | bidirectional | PA14 is a FT I/O that carries the SWCLK debug clock and doubles as the BOOT0 boot-mode pin, with an internal pull-down enabled after reset. |
| 37 | PA15 | bidirectional | PA15 is a FT I/O that provides SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR and USART3_RTS_DE_CK alternate functions. |
| 38 | PD0 | bidirectional | PD0 is a FT_c I/O (USB Type-C PD capable) that also provides EVENTOUT, SPI2_NSS, TIM16_CH1 and UCPD2_CC1 alternate functions. |
| 39 | PD1 | bidirectional | PD1 is a FT_d I/O (USB Type-C PD dead battery) that also provides EVENTOUT, SPI2_SCK, TIM17_CH1 and UCPD2_DBCC1 alternate functions. |
| 40 | PD2 | bidirectional | PD2 is a FT_c I/O (USB Type-C PD capable) that also provides USART3_RTS_DE_CK, TIM3_ETR, TIM1_CH1N and UCPD2_CC2 alternate functions. |
| 41 | PD3 | bidirectional | PD3 is a FT_d I/O (USB Type-C PD dead battery) that also provides USART2_CTS, SPI2_MISO, TIM1_CH2N and UCPD2_DBCC2 alternate functions. |
| 42 | PB3 | bidirectional | PB3 is a FT_a I/O with analog switch function that also provides SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2 and COMP2_INM. |
| 43 | PB4 | bidirectional | PB4 is a FT_a I/O with analog switch function that also provides SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS and COMP2_INP. |
| 44 | PB5 | bidirectional | PB5 is an FT I/O that also provides SPI1_MOSI/I2S1_SD, TIM3_CH2, I2C1_SMBA, LPTIM1_IN1, COMP2_OUT and the WKUP6 wakeup function. |
| 45 | PB6 | bidirectional | PB6 is a FT_fa I/O (Fm+ capable, with analog switch) that also provides USART1_TX, TIM1_CH3, I2C1_SCL and COMP2_INP alternate functions. |
| 46 | PB7 | bidirectional | PB7 is a FT_fa I/O (Fm+ capable, with analog switch) that also provides USART1_RX, SPI2_MOSI, I2C1_SDA, COMP2_INM and PVD_IN. |
| 47 | PB8 | bidirectional | PB8 is a FT_f I/O (Fm+ capable) that also provides CEC, SPI2_SCK, TIM16_CH1, USART3_TX and I2C1_SCL alternate functions. |
| 48 | PB9 | bidirectional | PB9 is a FT_f I/O (Fm+ capable) that also provides IR_OUT, UCPD2_FRSTX, TIM17_CH1, USART3_RX, SPI2_NSS and I2C1_SDA alternate functions. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 55 | ||
| Analog supply voltage for ADC and COMP operation | VDDA | 1.62 | 3.6 | V | For ADC and COMP operation | 55 | |
| Analog supply voltage for DAC operation | VDDA | 1.8 | 3.6 | V | For DAC operation | 55 | |
| Analog supply voltage for VREFBUF operation | VDDA | 2.4 | 3.6 | V | For VREFBUF operation | 55 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 55 | ||
| Internal AHB clock frequency | fHCLK | 0 | 64 | MHz | 55 | ||
| Internal APB clock frequency | fPCLK | 0 | 64 | MHz | 55 | ||
| Ambient temperature (suffix 6) | TA | -40 | 85 | °C | Suffix 6 | 55 | |
| Junction temperature (suffix 6) | TJ | -40 | 105 | °C | Suffix 6 | 55 | |
| External supply voltage | VDD | -0.3 | 4 | V | 54 | ||
| External supply voltage on VBAT pin | VBAT | -0.3 | 4 | V | 54 | ||
| Current into VDD/VDDA power pin (source) | IVDD/VDDA | 100 | mA | 54 | |||
| Current out of VSS/VSSA ground pin (sink) | IVSS/VSSA | 100 | mA | 54 | |||
| Output current sunk by any I/O and control pin | IIO(PIN) | 15 | mA | Except FT_f pins | 54 | ||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | FT_f pin | 54 | ||
| Output current sourced by any I/O and control pin | IIO(PIN) | 15 | mA | 54 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | 80 | mA | 54 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | 80 | mA | 54 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 55 | ||
| Maximum junction temperature | TJ | 150 | °C | 55 | |||
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40°C < TJ < 130°C | 57 |
| Power-on reset threshold | VPOR | 1.62 | 1.66 | 1.7 | V | 56 | |
| Power-down reset threshold | VPDR | 1.6 | 1.64 | 1.69 | V | 56 | |
| Brownout reset threshold 1, VDD rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 56 |
| Brownout reset threshold 2, VDD rising | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 56 |
| Brownout reset threshold 3, VDD rising | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 56 |
| Brownout reset threshold 4, VDD rising | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 56 |
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 250 | 400 | μs | VDD rising | 56 | |
| HSI16 frequency | fHSI16 | 15.88 | 16.08 | MHz | VDD=3.0 V, TA=30 °C | 72 | |
| LSI frequency | fLSI | 31.04 | 32.96 | kHz | VDD = 3.0 V, TA = 30 °C | 73 | |
| LSI frequency over supply and temperature | fLSI | 29.5 | 34 | kHz | VDD = 1.62 V to 3.6 V, TA = -40 to 125 °C | 73 | |
| HSE oscillator frequency | fOSC_IN | 4 | 8 | 48 | MHz | 69 | |
| HSE feedback resistor | RF | 200 | kΩ | 69 | |||
| PLL input clock frequency | fPLL_IN | 2.66 | 16 | MHz | 74 | ||
| ADC clock frequency, Range 1 | fADC | 0.14 | 35 | MHz | Range 1 | 85 | |
| ADC clock frequency, Range 2 | fADC | 0.14 | 16 | MHz | Range 2 | 85 | |
| External input impedance | RAIN | 50 | kΩ | 85 | |||
| Weak pull-up equivalent resistor | RPU | 25 | 40 | 55 | kΩ | VIN = VSS | 79 |
| Weak pull-down equivalent resistor | RPD | 25 | 40 | 55 | kΩ | VIN = VDDIO1 | 79 |
| Supply current in Standby mode, RTC disabled | IDD(Standby) | 0.2 | 0.9 | µA | VDD = 3.0 V, 25 °C | 62 | |
| Flash endurance | NEND | 10 | kcycles | TA = -40 to +105 °C | 75 | ||
| I/O pin capacitance | CIO | 5 | pF | 79 | |||
| ADC internal sample and hold capacitor | CADC | 5 | pF | 85 |
CAD (KiCad official)
- Symbol:
STM32G071CBU6 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32g071cbu6-etched.step/stm32g071cbu6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32g071cbu6.step/stm32g071cbu6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (133 pp, sha256
96d7e9ca1500e794, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).