component
STM32G051C8T6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+84@@ -0,0 +1,84 @@+# STM32G051C8T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32G051C8T6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PC13 | bidirectional | 5 V-tolerant (FT) I/O supplied through the RTC power switch, which sinks only 3 mA, so output use is limited to 2 MHz at 30 pF and it must not source current such as an LED. |+| 2 | PC14-OSC32_IN | bidirectional | 5 V-tolerant (FT) I/O on the RTC power switch with the same 3 mA, 2 MHz / 30 pF output limits as PC13, and alternate function OSC32_IN for the 32.768 kHz LSE crystal input. |+| 3 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant (FT) I/O on the RTC power switch with the same output limits as PC13, and OSC32_OUT as the LSE 32.768 kHz crystal output. |+| 4 | VBAT | power_in | Power supply for the RTC, TAMP, the 32.768 kHz oscillator and backup registers when VDD is not present, specified at 1.55 V to 3.6 V. |+| 5 | VREF+ | power_in | Analog peripheral reference voltage input, or the output of the internal voltage reference buffer when enabled; when VDDA < 2 V it must equal VDDA, and when VDDA ≥ 2 V it must be between 2 V and VDDA. |+| 6 | VDD/VDDA | power_in | Main supply for the internal regulator, I/Os and analog blocks, specified at 1.7 V to 3.6 V (VDDA minimum 1.62 V for ADC and COMP). |+| 7 | VSS/VSSA | power_in | Ground reference for digital and analog circuits. |+| 8 | PF0-OSC_IN | bidirectional | 5 V-tolerant (FT) I/O with alternate function TIM14_CH1 and OSC_IN as the HSE crystal input. |+| 9 | PF1-OSC_OUT | bidirectional | 5 V-tolerant (FT) I/O with OSC_OUT as the HSE crystal output and alternate functions OSC_EN and TIM15_CH1N. |+| 10 | PF2-NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up whose default function is NRST; when used in this mode, other I/Os connected to it must be configured with care. |+| 11 | PA0 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN0, COMP1_INM8 and wakeup pin WKUP1. |+| 12 | PA1 | bidirectional | 5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN1 and COMP1_INP2. |+| 13 | PA2 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN2, COMP2_INM8, wakeup pin WKUP4 and LSCO output. |+| 14 | PA3 | bidirectional | 5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN3 and COMP2_INP2. |+| 15 | PA4 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN4, DAC1_OUT1 analog output and RTC_OUT2. |+| 16 | PA5 | bidirectional | 5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN5 and DAC1_OUT2 analog output. |+| 17 | PA6 | bidirectional | 5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN6 and alternate function COMP1_OUT. |+| 18 | PA7 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN7 and alternate function COMP2_OUT. |+| 19 | PB0 | bidirectional | 5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN8 and alternate function COMP1_OUT. |+| 20 | PB1 | bidirectional | 5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN9 and COMP1_INM6. |+| 21 | PB2 | bidirectional | 5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN10 and COMP1_INP1. |+| 22 | PB10 | bidirectional | 5 V-tolerant (FT_fa) I/O, Fm+ capable and with analog switch function, also ADC_IN11 and alternate function COMP1_OUT. |+| 23 | PB11 | bidirectional | 5 V-tolerant (FT_fa) I/O, Fm+ capable and with analog switch function, also ADC_IN15 and alternate function COMP2_OUT. |+| 24 | PB12 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN16 and alternate functions SPI2_NSS, LPUART1_RTS_DE and TIM1_BKIN. |+| 25 | PB13 | bidirectional | 5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions SPI2_SCK, LPUART1_CTS, TIM1_CH1N and I2C2_SCL. |+| 26 | PB14 | bidirectional | 5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions SPI2_MISO, TIM1_CH2N, TIM15_CH1 and I2C2_SDA. |+| 27 | PB15 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions SPI2_MOSI, TIM1_CH3N, TIM15_CH1N and TIM15_CH2, and additional function RTC_REFIN. |+| 28 | PA8 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions MCO, SPI2_NSS, TIM1_CH1, LPTIM2_OUT and EVENTOUT. |+| 29 | PA9 | bidirectional | 5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions MCO, USART1_TX, TIM1_CH2, SPI2_MISO and I2C1_SCL; it can be remapped in place of PA11 via SYSCFG_CFGR1. |+| 30 | PC6 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions TIM3_CH1 and TIM2_CH3. |+| 31 | PC7 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions TIM3_CH2 and TIM2_CH4. |+| 32 | PA10 | bidirectional | 5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BKIN and I2C1_SDA; it can be remapped in place of PA12 via SYSCFG_CFGR1. |+| 33 | PA11 [PA9] | bidirectional | 5 V-tolerant (FT_fa) I/O, Fm+ capable, with analog switch function, also ADC_IN15 and alternate functions USART1_CTS, TIM1_CH4, TIM1_BKIN2, I2C2_SCL and COMP1_OUT. |+| 34 | PA12 [PA10] | bidirectional | 5 V-tolerant (FT_fa) I/O, Fm+ capable, with analog switch function, also ADC_IN16 and alternate functions USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA and COMP2_OUT. |+| 35 | PA13 | bidirectional | 5 V-tolerant (FT_ea) I/O with switchable diode to VDD; it is configured as SWDIO after reset with the internal pull-up active, also ADC_IN17 and IR_OUT. |+| 36 | PA14-BOOT0 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch function; after reset it is SWCLK with the internal pull-down active, and it also carries the BOOT0 boot-mode pin and ADC_IN18. |+| 37 | PA15 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR and EVENTOUT. |+| 38 | PD0 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions EVENTOUT, SPI2_NSS and TIM16_CH1. |+| 39 | PD1 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions EVENTOUT, SPI2_SCK and TIM17_CH1. |+| 40 | PD2 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions TIM3_ETR and TIM1_CH1N. |+| 41 | PD3 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions USART2_CTS, SPI2_MISO and TIM1_CH2N. |+| 42 | PB3 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch function, with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2 and USART1_RTS_DE_CK, and COMP2_INM6 additional function. |+| 43 | PB4 | bidirectional | 5 V-tolerant (FT_a) I/O with analog switch function, with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS and TIM17_BKIN, and COMP2_INP0 additional function. |+| 44 | PB5 | bidirectional | 5 V-tolerant (FT) I/O with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, LPTIM1_IN1, I2C1_SMBA and COMP2_OUT, and wakeup pin WKUP6. |+| 45 | PB6 | bidirectional | 5 V-tolerant (FT_fa) I/O, Fm+ capable, with analog switch function, with alternate functions USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR and I2C1_SCL, and COMP2_INP1 additional function. |+| 46 | PB7 | bidirectional | 5 V-tolerant (FT_fa) I/O, Fm+ capable, with analog switch function, also ADC_IN11, COMP2_INM7 and PVD_IN, with alternate functions USART1_RX, SPI2_MOSI, TIM17_CH1N, LPTIM1_IN2 and I2C1_SDA. |+| 47 | PB8 | bidirectional | 5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions SPI2_SCK, TIM16_CH1, TIM15_BKIN and I2C1_SCL. |+| 48 | PB9 | bidirectional | 5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions IR_OUT, TIM17_CH1, SPI2_NSS and I2C1_SDA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32G051C8T6`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32g051c8t6-etched.step` / `stm32g051c8t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g051c8t6.step` / `stm32g051c8t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590473703881809920) (126 pp, sha256 `773ba84c25c7d2f3`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g051c8t6-datasheet.pdf)
page.jsonadded+439@@ -0,0 +1,439 @@+{+ "slug": "stm32g051c8t6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32g051c8t6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32g051c8t6.kicad_sym",+ "stm32g051c8t6.kicad_mod",+ "stm32g051c8t6.glb",+ "stm32g051c8t6.step",+ "stm32g051c8t6.lbr",+ "docs/hero.png",+ "docs/stm32g051c8t6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32g051c8t6-hero.glb",+ "stm32g051c8t6-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32G051C8T6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590473703881809920",+ "parts": {+ "symbol": "stm32g051c8t6.kicad_sym",+ "footprint": "stm32g051c8t6.kicad_mod",+ "model_3d": "stm32g051c8t6-hero.glb",+ "model_3d_plain": "stm32g051c8t6.glb",+ "model_3d_step": "stm32g051c8t6-etched.step",+ "model_3d_step_plain": "stm32g051c8t6.step",+ "lbr": "stm32g051c8t6.lbr"+ },+ "distributor_links": {+ "lcsc": "C3227130",+ "digikey": "497-STM32G051C8T6-ND",+ "mouser": "511-STM32G051C8T6"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T00:34:10Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-STM32G051C8T6-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32G051C8T6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O supplied through the RTC power switch, which sinks only 3 mA, so output use is limited to 2 MHz at 30 pF and it must not source current such as an LED."+ },+ {+ "number": "2",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O on the RTC power switch with the same 3 mA, 2 MHz / 30 pF output limits as PC13, and alternate function OSC32_IN for the 32.768 kHz LSE crystal input."+ },+ {+ "number": "3",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O on the RTC power switch with the same output limits as PC13, and OSC32_OUT as the LSE 32.768 kHz crystal output."+ },+ {+ "number": "4",+ "name": "VBAT",+ "type": "power_in",+ "description": "Power supply for the RTC, TAMP, the 32.768 kHz oscillator and backup registers when VDD is not present, specified at 1.55 V to 3.6 V."+ },+ {+ "number": "5",+ "name": "VREF+",+ "type": "power_in",+ "description": "Analog peripheral reference voltage input, or the output of the internal voltage reference buffer when enabled; when VDDA < 2 V it must equal VDDA, and when VDDA ≥ 2 V it must be between 2 V and VDDA."+ },+ {+ "number": "6",+ "name": "VDD/VDDA",+ "type": "power_in",+ "description": "Main supply for the internal regulator, I/Os and analog blocks, specified at 1.7 V to 3.6 V (VDDA minimum 1.62 V for ADC and COMP)."+ },+ {+ "number": "7",+ "name": "VSS/VSSA",+ "type": "power_in",+ "description": "Ground reference for digital and analog circuits."+ },+ {+ "number": "8",+ "name": "PF0-OSC_IN",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate function TIM14_CH1 and OSC_IN as the HSE crystal input."+ },+ {+ "number": "9",+ "name": "PF1-OSC_OUT",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with OSC_OUT as the HSE crystal output and alternate functions OSC_EN and TIM15_CH1N."+ },+ {+ "number": "10",+ "name": "PF2-NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with embedded weak pull-up whose default function is NRST; when used in this mode, other I/Os connected to it must be configured with care."+ },+ {+ "number": "11",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN0, COMP1_INM8 and wakeup pin WKUP1."+ },+ {+ "number": "12",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN1 and COMP1_INP2."+ },+ {+ "number": "13",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN2, COMP2_INM8, wakeup pin WKUP4 and LSCO output."+ },+ {+ "number": "14",+ "name": "PA3",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN3 and COMP2_INP2."+ },+ {+ "number": "15",+ "name": "PA4",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN4, DAC1_OUT1 analog output and RTC_OUT2."+ },+ {+ "number": "16",+ "name": "PA5",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN5 and DAC1_OUT2 analog output."+ },+ {+ "number": "17",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN6 and alternate function COMP1_OUT."+ },+ {+ "number": "18",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN7 and alternate function COMP2_OUT."+ },+ {+ "number": "19",+ "name": "PB0",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN8 and alternate function COMP1_OUT."+ },+ {+ "number": "20",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN9 and COMP1_INM6."+ },+ {+ "number": "21",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ea) I/O with analog switch function and switchable diode to VDD, also ADC_IN10 and COMP1_INP1."+ },+ {+ "number": "22",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fa) I/O, Fm+ capable and with analog switch function, also ADC_IN11 and alternate function COMP1_OUT."+ },+ {+ "number": "23",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fa) I/O, Fm+ capable and with analog switch function, also ADC_IN15 and alternate function COMP2_OUT."+ },+ {+ "number": "24",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_a) I/O with analog switch function, also ADC_IN16 and alternate functions SPI2_NSS, LPUART1_RTS_DE and TIM1_BKIN."+ },+ {+ "number": "25",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions SPI2_SCK, LPUART1_CTS, TIM1_CH1N and I2C2_SCL."+ },+ {+ "number": "26",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions SPI2_MISO, TIM1_CH2N, TIM15_CH1 and I2C2_SDA."+ },+ {+ "number": "27",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions SPI2_MOSI, TIM1_CH3N, TIM15_CH1N and TIM15_CH2, and additional function RTC_REFIN."+ },+ {+ "number": "28",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions MCO, SPI2_NSS, TIM1_CH1, LPTIM2_OUT and EVENTOUT."+ },+ {+ "number": "29",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions MCO, USART1_TX, TIM1_CH2, SPI2_MISO and I2C1_SCL; it can be remapped in place of PA11 via SYSCFG_CFGR1."+ },+ {+ "number": "30",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions TIM3_CH1 and TIM2_CH3."+ },+ {+ "number": "31",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions TIM3_CH2 and TIM2_CH4."+ },+ {+ "number": "32",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BKIN and I2C1_SDA; it can be remapped in place of PA12 via SYSCFG_CFGR1."+ },+ {+ "number": "33",+ "name": "PA11 [PA9]",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fa) I/O, Fm+ capable, with analog switch function, also ADC_IN15 and alternate functions USART1_CTS, TIM1_CH4, TIM1_BKIN2, I2C2_SCL and COMP1_OUT."+ },+ {+ "number": "34",+ "name": "PA12 [PA10]",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fa) I/O, Fm+ capable, with analog switch function, also ADC_IN16 and alternate functions USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA and COMP2_OUT."+ },+ {+ "number": "35",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_ea) I/O with switchable diode to VDD; it is configured as SWDIO after reset with the internal pull-up active, also ADC_IN17 and IR_OUT."+ },+ {+ "number": "36",+ "name": "PA14-BOOT0",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_a) I/O with analog switch function; after reset it is SWCLK with the internal pull-down active, and it also carries the BOOT0 boot-mode pin and ADC_IN18."+ },+ {+ "number": "37",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR and EVENTOUT."+ },+ {+ "number": "38",+ "name": "PD0",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions EVENTOUT, SPI2_NSS and TIM16_CH1."+ },+ {+ "number": "39",+ "name": "PD1",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions EVENTOUT, SPI2_SCK and TIM17_CH1."+ },+ {+ "number": "40",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions TIM3_ETR and TIM1_CH1N."+ },+ {+ "number": "41",+ "name": "PD3",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions USART2_CTS, SPI2_MISO and TIM1_CH2N."+ },+ {+ "number": "42",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_a) I/O with analog switch function, with alternate functions SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2 and USART1_RTS_DE_CK, and COMP2_INM6 additional function."+ },+ {+ "number": "43",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_a) I/O with analog switch function, with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS and TIM17_BKIN, and COMP2_INP0 additional function."+ },+ {+ "number": "44",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT) I/O with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, LPTIM1_IN1, I2C1_SMBA and COMP2_OUT, and wakeup pin WKUP6."+ },+ {+ "number": "45",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fa) I/O, Fm+ capable, with analog switch function, with alternate functions USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR and I2C1_SCL, and COMP2_INP1 additional function."+ },+ {+ "number": "46",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_fa) I/O, Fm+ capable, with analog switch function, also ADC_IN11, COMP2_INM7 and PVD_IN, with alternate functions USART1_RX, SPI2_MOSI, TIM17_CH1N, LPTIM1_IN2 and I2C1_SDA."+ },+ {+ "number": "47",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions SPI2_SCK, TIM16_CH1, TIM15_BKIN and I2C1_SCL."+ },+ {+ "number": "48",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5 V-tolerant (FT_f) I/O, Fm+ capable, with alternate functions IR_OUT, TIM17_CH1, SPI2_NSS and I2C1_SDA."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin names in the datasheet are shown with bracketed remap names (PA11 [PA9], PA12 [PA10]) and the da; PC13, PC14 and PC15 are supplied through the RTC power switch (3 mA sink limit) and are restricted t; Pin 10 (PF2-NRST) is typed bidirectional per Table 11 (RST = bidirectional reset with weak pull-up)."+ ],+ "pages_sent": 57,+ "cost_usd": 0.2685,+ "at": "2026-10-08T00:33:45"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590473703881809920",+ "pages": 126,+ "sha256": "773ba84c25c7d2f3",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm32g051c8t6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32g051c8t6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "310c1105d917e21b78da490c41c56daf6ce05cddb4f6c3f52d0eccd686dc8f04",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}