← Commit history

Initial commit: component/stm32g031k6t6

Ray ·301a3181e7 ·
2 files changed +370
README.mdadded+68
@@ -0,0 +1,68 @@+# STM32G031K6T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)++STM32G031K6T6 from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PB9 | bidirectional | FT_f 5 V-tolerant GPIO (Fm+ I2C1_SDA capable), current group N; alt: IR_OUT, TIM17_CH1, SPI2_NSS, I2C1_SDA, EVENTOUT. |+| 2 | PC14-OSC32_IN | bidirectional | FT GPIO, current group N; in LQFP32 doubles as LSE 32.768 kHz crystal input (OSC32_IN) or HSE 4-48 MHz crystal input (OSC_IN); alt: TIM1_BK2. |+| 3 | PC15-OSC32_OUT | bidirectional | FT GPIO, current group N; additional function OSC32_OUT (LSE crystal output); alt functions OSC32_EN and OSC_EN enable LSE or HSE oscillator respectively. |+| 4 | VDD/VDDA | power_in | Main digital supply and analog supply, 1.7 V to 3.6 V; VBAT and VREF+ pads internally bonded to this pin in LQFP32; decouple with 100 nF + 4.7 µF ceramics. |+| 5 | VSS/VSSA | power_in | Digital and analog ground reference, 0 V. |+| 6 | PF2-NRST | bidirectional | Active-low bidirectional reset with integrated 25-55 kΩ pull-up resistor; glitches <70 ns filtered, ≥350 ns pulse (at 1.7 V ≤ VDD ≤ 3.6 V) triggers reset; alt: MCO. |+| 7 | PA0 | bidirectional | FT_a 5 V-tolerant GPIO with analog switch, current group S; alt: SPI2_SCK, USART2_CTS, TIM2_CH1_ETR, LPTIM1_OUT; additional: ADC_IN0, TAMP_IN2, WKUP1. |+| 8 | PA1 | bidirectional | FT_ea 5 V-tolerant GPIO with analog switch and switchable diode to VDD, current group S; alt: SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, I2C1_SMBA; additional: ADC_IN1. |+| 9 | PA2 | bidirectional | FT_a 5 V-tolerant GPIO with analog switch, current group S; alt: SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, LPUART1_TX; additional: ADC_IN2, WKUP4, LSCO. |+| 10 | PA3 | bidirectional | FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI2_MISO, USART2_RX, TIM2_CH4, LPUART1_RX; additional: ADC_IN3. |+| 11 | PA4 | bidirectional | FT_a 5 V-tolerant GPIO with analog switch, current group S; alt: SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, LPTIM2_OUT; additional: ADC_IN4, TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2. |+| 12 | PA5 | bidirectional | FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI1_SCK/I2S1_CK, TIM2_CH1_ETR, LPTIM2_ETR; additional: ADC_IN5. |+| 13 | PA6 | bidirectional | FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BK, TIM16_CH1, LPUART1_CTS; additional: ADC_IN6. |+| 14 | PA7 | bidirectional | FT_a 5 V-tolerant GPIO with analog switch, current group S; alt: SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1; additional: ADC_IN7. |+| 15 | PB0 | bidirectional | FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, LPTIM1_OUT; additional: ADC_IN8. |+| 16 | PB1 | bidirectional | FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: TIM14_CH1, TIM3_CH4, TIM1_CH3N, LPTIM2_IN1, LPUART1_RTS_DE; additional: ADC_IN9. |+| 17 | PB2 | bidirectional | FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI2_MISO, LPTIM1_OUT, EVENTOUT; additional: ADC_IN10. |+| 18 | PA8 | bidirectional | FT 5 V-tolerant GPIO, current group S; alt: MCO (microcontroller clock output), SPI2_NSS, TIM1_CH1, LPTIM2_OUT, EVENTOUT. |+| 19 | PA9 | bidirectional | FT_f 5 V-tolerant GPIO (Fm+ I2C1_SCL capable), current group S; alt: MCO, USART1_TX, TIM1_CH2, SPI2_MISO, I2C1_SCL, EVENTOUT. |+| 20 | PC6 | bidirectional | FT 5 V-tolerant GPIO, current group S; alt: TIM3_CH1, TIM2_CH3. |+| 21 | PA10 | bidirectional | FT_f 5 V-tolerant GPIO (Fm+ I2C1_SDA capable), current group S; alt: SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BK, I2C1_SDA, EVENTOUT. |+| 22 | PA11[PA9] | bidirectional | FT_fa 5 V-tolerant GPIO with analog switch and switchable diode, current group N; remapped pin exposing PA11 on the physical PA9 pad of LQFP48; alt: SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BK2, I2C2_SCL; additional: ADC_IN15. |+| 23 | PA12[PA10] | bidirectional | FT_fa 5 V-tolerant GPIO with analog switch and switchable diode, current group N; remapped pin exposing PA12 on the physical PA10 pad of LQFP48; alt: SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA; additional: ADC_IN16. |+| 24 | PA13 | bidirectional | FT_ea 5 V-tolerant GPIO, current group N; default function SWDIO (serial-wire debug I/O) after reset; alt: SWDIO, IR_OUT, EVENTOUT; additional: ADC_IN17. |+| 25 | PA14-BOOT0 | bidirectional | FT_a 5 V-tolerant GPIO, current group N; default function SWCLK (serial-wire debug clock) after reset; selects boot source as BOOT0; alt: SWCLK, USART2_TX, EVENTOUT; additional: BOOT0, ADC_IN18. |+| 26 | PA15 | bidirectional | FT 5 V-tolerant GPIO, current group N; alt: SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, EVENTOUT. |+| 27 | PB3 | bidirectional | FT 5 V-tolerant GPIO, current group N; alt: SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART1_RTS_DE_CK, EVENTOUT. |+| 28 | PB4 | bidirectional | FT 5 V-tolerant GPIO, current group N; alt: SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BK, EVENTOUT. |+| 29 | PB5 | bidirectional | FT 5 V-tolerant GPIO, current group N; alt: SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BK, LPTIM1_IN1, I2C1_SMBA; additional: WKUP6. |+| 30 | PB6 | bidirectional | FT_f 5 V-tolerant GPIO (Fm+ I2C1_SCL capable), current group N; alt: USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR, I2C1_SCL, EVENTOUT. |+| 31 | PB7 | bidirectional | FT_fa 5 V-tolerant GPIO with analog switch and switchable diode, current group N; alt: USART1_RX, SPI2_MOSI, TIM17_CH1N, LPTIM1_IN2, I2C1_SDA, EVENTOUT; additional: ADC_IN11, PVD_IN. |+| 32 | PB8 | bidirectional | FT_f 5 V-tolerant GPIO (Fm+ I2C1_SCL capable), current group N; alt: SPI2_SCK, TIM16_CH1, I2C1_SCL, EVENTOUT. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-32(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 32 |++## CAD (KiCad official)++- Symbol: `STM32G031K6T6`+- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`+- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32g031k6t6-etched.step` / `stm32g031k6t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g031k6t6.step` / `stm32g031k6t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884840493535233) (117 pp, sha256 `95ae804dbf135590`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g031k6t6-datasheet.pdf)
page.jsonadded+302
@@ -0,0 +1,302 @@+{+  "slug": "stm32g031k6t6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-32(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32g031k6t6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32g031k6t6.kicad_sym",+    "stm32g031k6t6.kicad_mod",+    "stm32g031k6t6.glb",+    "stm32g031k6t6.step",+    "stm32g031k6t6.lbr",+    "docs/hero.png",+    "docs/stm32g031k6t6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32G031K6T6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-32(7x7)",+    "pin_count": 32,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884840493535233",+    "parts": {+      "symbol": "stm32g031k6t6.kicad_sym",+      "footprint": "stm32g031k6t6.kicad_mod",+      "model_3d": "stm32g031k6t6-etched.glb",+      "model_3d_plain": "stm32g031k6t6.glb",+      "model_3d_step": "stm32g031k6t6-etched.step",+      "model_3d_step_plain": "stm32g031k6t6.step",+      "lbr": "stm32g031k6t6.lbr"+    },+    "distributor_links": {+      "lcsc": "C432202",+      "digikey": "497-19553-ND",+      "mouser": "511-STM32G031K6T6"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T02:26:11Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-19553-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32G031K6T6",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "PB9",+        "type": "bidirectional",+        "description": "FT_f 5 V-tolerant GPIO (Fm+ I2C1_SDA capable), current group N; alt: IR_OUT, TIM17_CH1, SPI2_NSS, I2C1_SDA, EVENTOUT."+      },+      {+        "number": "2",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "FT GPIO, current group N; in LQFP32 doubles as LSE 32.768 kHz crystal input (OSC32_IN) or HSE 4-48 MHz crystal input (OSC_IN); alt: TIM1_BK2."+      },+      {+        "number": "3",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "FT GPIO, current group N; additional function OSC32_OUT (LSE crystal output); alt functions OSC32_EN and OSC_EN enable LSE or HSE oscillator respectively."+      },+      {+        "number": "4",+        "name": "VDD/VDDA",+        "type": "power_in",+        "description": "Main digital supply and analog supply, 1.7 V to 3.6 V; VBAT and VREF+ pads internally bonded to this pin in LQFP32; decouple with 100 nF + 4.7 µF ceramics."+      },+      {+        "number": "5",+        "name": "VSS/VSSA",+        "type": "power_in",+        "description": "Digital and analog ground reference, 0 V."+      },+      {+        "number": "6",+        "name": "PF2-NRST",+        "type": "bidirectional",+        "description": "Active-low bidirectional reset with integrated 25-55 kΩ pull-up resistor; glitches <70 ns filtered, ≥350 ns pulse (at 1.7 V ≤ VDD ≤ 3.6 V) triggers reset; alt: MCO."+      },+      {+        "number": "7",+        "name": "PA0",+        "type": "bidirectional",+        "description": "FT_a 5 V-tolerant GPIO with analog switch, current group S; alt: SPI2_SCK, USART2_CTS, TIM2_CH1_ETR, LPTIM1_OUT; additional: ADC_IN0, TAMP_IN2, WKUP1."+      },+      {+        "number": "8",+        "name": "PA1",+        "type": "bidirectional",+        "description": "FT_ea 5 V-tolerant GPIO with analog switch and switchable diode to VDD, current group S; alt: SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, I2C1_SMBA; additional: ADC_IN1."+      },+      {+        "number": "9",+        "name": "PA2",+        "type": "bidirectional",+        "description": "FT_a 5 V-tolerant GPIO with analog switch, current group S; alt: SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, LPUART1_TX; additional: ADC_IN2, WKUP4, LSCO."+      },+      {+        "number": "10",+        "name": "PA3",+        "type": "bidirectional",+        "description": "FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI2_MISO, USART2_RX, TIM2_CH4, LPUART1_RX; additional: ADC_IN3."+      },+      {+        "number": "11",+        "name": "PA4",+        "type": "bidirectional",+        "description": "FT_a 5 V-tolerant GPIO with analog switch, current group S; alt: SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, LPTIM2_OUT; additional: ADC_IN4, TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2."+      },+      {+        "number": "12",+        "name": "PA5",+        "type": "bidirectional",+        "description": "FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI1_SCK/I2S1_CK, TIM2_CH1_ETR, LPTIM2_ETR; additional: ADC_IN5."+      },+      {+        "number": "13",+        "name": "PA6",+        "type": "bidirectional",+        "description": "FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BK, TIM16_CH1, LPUART1_CTS; additional: ADC_IN6."+      },+      {+        "number": "14",+        "name": "PA7",+        "type": "bidirectional",+        "description": "FT_a 5 V-tolerant GPIO with analog switch, current group S; alt: SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1; additional: ADC_IN7."+      },+      {+        "number": "15",+        "name": "PB0",+        "type": "bidirectional",+        "description": "FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, LPTIM1_OUT; additional: ADC_IN8."+      },+      {+        "number": "16",+        "name": "PB1",+        "type": "bidirectional",+        "description": "FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: TIM14_CH1, TIM3_CH4, TIM1_CH3N, LPTIM2_IN1, LPUART1_RTS_DE; additional: ADC_IN9."+      },+      {+        "number": "17",+        "name": "PB2",+        "type": "bidirectional",+        "description": "FT_ea 5 V-tolerant GPIO with analog switch and switchable diode, current group S; alt: SPI2_MISO, LPTIM1_OUT, EVENTOUT; additional: ADC_IN10."+      },+      {+        "number": "18",+        "name": "PA8",+        "type": "bidirectional",+        "description": "FT 5 V-tolerant GPIO, current group S; alt: MCO (microcontroller clock output), SPI2_NSS, TIM1_CH1, LPTIM2_OUT, EVENTOUT."+      },+      {+        "number": "19",+        "name": "PA9",+        "type": "bidirectional",+        "description": "FT_f 5 V-tolerant GPIO (Fm+ I2C1_SCL capable), current group S; alt: MCO, USART1_TX, TIM1_CH2, SPI2_MISO, I2C1_SCL, EVENTOUT."+      },+      {+        "number": "20",+        "name": "PC6",+        "type": "bidirectional",+        "description": "FT 5 V-tolerant GPIO, current group S; alt: TIM3_CH1, TIM2_CH3."+      },+      {+        "number": "21",+        "name": "PA10",+        "type": "bidirectional",+        "description": "FT_f 5 V-tolerant GPIO (Fm+ I2C1_SDA capable), current group S; alt: SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BK, I2C1_SDA, EVENTOUT."+      },+      {+        "number": "22",+        "name": "PA11[PA9]",+        "type": "bidirectional",+        "description": "FT_fa 5 V-tolerant GPIO with analog switch and switchable diode, current group N; remapped pin exposing PA11 on the physical PA9 pad of LQFP48; alt: SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BK2, I2C2_SCL; additional: ADC_IN15."+      },+      {+        "number": "23",+        "name": "PA12[PA10]",+        "type": "bidirectional",+        "description": "FT_fa 5 V-tolerant GPIO with analog switch and switchable diode, current group N; remapped pin exposing PA12 on the physical PA10 pad of LQFP48; alt: SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA; additional: ADC_IN16."+      },+      {+        "number": "24",+        "name": "PA13",+        "type": "bidirectional",+        "description": "FT_ea 5 V-tolerant GPIO, current group N; default function SWDIO (serial-wire debug I/O) after reset; alt: SWDIO, IR_OUT, EVENTOUT; additional: ADC_IN17."+      },+      {+        "number": "25",+        "name": "PA14-BOOT0",+        "type": "bidirectional",+        "description": "FT_a 5 V-tolerant GPIO, current group N; default function SWCLK (serial-wire debug clock) after reset; selects boot source as BOOT0; alt: SWCLK, USART2_TX, EVENTOUT; additional: BOOT0, ADC_IN18."+      },+      {+        "number": "26",+        "name": "PA15",+        "type": "bidirectional",+        "description": "FT 5 V-tolerant GPIO, current group N; alt: SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, EVENTOUT."+      },+      {+        "number": "27",+        "name": "PB3",+        "type": "bidirectional",+        "description": "FT 5 V-tolerant GPIO, current group N; alt: SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART1_RTS_DE_CK, EVENTOUT."+      },+      {+        "number": "28",+        "name": "PB4",+        "type": "bidirectional",+        "description": "FT 5 V-tolerant GPIO, current group N; alt: SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BK, EVENTOUT."+      },+      {+        "number": "29",+        "name": "PB5",+        "type": "bidirectional",+        "description": "FT 5 V-tolerant GPIO, current group N; alt: SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BK, LPTIM1_IN1, I2C1_SMBA; additional: WKUP6."+      },+      {+        "number": "30",+        "name": "PB6",+        "type": "bidirectional",+        "description": "FT_f 5 V-tolerant GPIO (Fm+ I2C1_SCL capable), current group N; alt: USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR, I2C1_SCL, EVENTOUT."+      },+      {+        "number": "31",+        "name": "PB7",+        "type": "bidirectional",+        "description": "FT_fa 5 V-tolerant GPIO with analog switch and switchable diode, current group N; alt: USART1_RX, SPI2_MOSI, TIM17_CH1N, LPTIM1_IN2, I2C1_SDA, EVENTOUT; additional: ADC_IN11, PVD_IN."+      },+      {+        "number": "32",+        "name": "PB8",+        "type": "bidirectional",+        "description": "FT_f 5 V-tolerant GPIO (Fm+ I2C1_SCL capable), current group N; alt: SPI2_SCK, TIM16_CH1, I2C1_SCL, EVENTOUT."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin PA12[PA10] and PA11[PA9] show alternate pin designations in brackets; these represent remapped f",+          "1/32 pins cited to the wrong page (name found elsewhere): ['9:PB9@p38']"+        ],+        "pages_sent": 117,+        "cost_usd": 1.1843,+        "at": "2026-09-27T02:25:50"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884840493535233",+        "pages": 117,+        "sha256": "95ae804dbf135590",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 32,+        "described": 32,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file