← Commit history

Initial commit: component/stm32g031f6p6

Ray ·469f91ed4a ·
2 files changed +271
README.mdadded+56
@@ -0,0 +1,56 @@+# STM32G031F6P6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · TSSOP-20++STM32G031F6P6 from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PB7/PB8 | bidirectional | 5V-tolerant FT_fa GPIO package pin bonding die pads PB7 (AF: USART1_RX, SPI2_MOSI, TIM17_CH1N, LPTIM1_IN2, I2C1_SDA, EVENTOUT; additional ADC_IN11, PVD_IN) and PB8 (AF: SPI2_SCK, TIM16_CH1, I2C1_SCL, EVENTOUT) onto the same TSSOP20 pin. |+| 2 | PC14-OSC32_IN/PB9 | bidirectional | 5V-tolerant FT GPIO package pin bonding die pads PC14 (LSE 32.768 kHz oscillator input OSC32_IN, also usable as OSC_IN, AF TIM1_BK2) and PB9 (AF: IR_OUT, TIM17_CH1, SPI2_NSS, I2C1_SDA, EVENTOUT) onto the same TSSOP20 pin. |+| 3 | PC15-OSC32_OUT | bidirectional | 5V-tolerant FT GPIO pin PC15 that provides the LSE 32.768 kHz oscillator output (OSC32_OUT) with OSC32_EN/OSC_EN alternate function. |+| 4 | VDD/VDDA | power_in | Combined external digital and analog power supply input, 1.7 V (1.6 V min power-on release) to 3.6 V, also supplying the VDDIO1 I/O domain and VDDA analog domain (ADC, voltage reference buffer). |+| 5 | VSS/VSSA | power_in | Combined digital and analog ground reference pin for the device. |+| 6 | PF2-NRST | bidirectional | Bidirectional GPIO PF2 pin with embedded weak pull-up (typ. 40 kΩ) that also functions as the NRST reset input (device reset when held low; filtered pulses under 70 ns are ignored, pulses over 350 ns guarantee reset) and MCO alternate output. |+| 7 | PA0 | bidirectional | 5V-tolerant FT_a GPIO pin with alternate functions SPI2_SCK, USART2_CTS, TIM2_CH1_ETR, LPTIM1_OUT and additional functions ADC_IN0, TAMP_IN2, WKUP1. |+| 8 | PA1 | bidirectional | 5V-tolerant FT_ea (Fm+/analog-switch capable) GPIO pin with alternate functions SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, I2C1_SMBA, EVENTOUT and additional function ADC_IN1. |+| 9 | PA2 | bidirectional | 5V-tolerant FT_a GPIO pin with alternate functions SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, LPUART1_TX and additional functions ADC_IN2, WKUP4, LSCO. |+| 10 | PA3 | bidirectional | 5V-tolerant FT_ea GPIO pin with alternate functions SPI2_MISO, USART2_RX, TIM2_CH4, LPUART1_RX, EVENTOUT and additional function ADC_IN3. |+| 11 | PA4 | bidirectional | 5V-tolerant FT_a GPIO pin with alternate functions SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, LPTIM2_OUT, EVENTOUT and additional functions ADC_IN4, TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2. |+| 12 | PA5 | bidirectional | 5V-tolerant FT_ea GPIO pin with alternate functions SPI1_SCK/I2S1_CK, TIM2_CH1_ETR, LPTIM2_ETR, EVENTOUT and additional function ADC_IN5. |+| 13 | PA6 | bidirectional | 5V-tolerant FT_ea GPIO pin with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BK, TIM16_CH1, LPUART1_CTS and additional function ADC_IN6. |+| 14 | PA7 | bidirectional | 5V-tolerant FT_a GPIO pin with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1 and additional function ADC_IN7. |+| 15 | PB0/PB1/PB2/PA8 | bidirectional | 5V-tolerant GPIO package pin bonding die pads PB0 (FT_ea; SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, LPTIM1_OUT; ADC_IN8), PB1 (FT_ea; TIM14_CH1, TIM3_CH4, TIM1_CH3N, LPTIM2_IN1, LPUART1_RTS_DE, EVENTOUT; ADC_IN9), PB2 (FT_ea; SPI2_MISO, LPTIM1_OUT, EVENTOUT; ADC_IN10) and PA8 (FT; MCO, SPI2_NSS, TIM1_CH1, LPTIM2_OUT, EVENTOUT) onto the same TSSOP20 pin. |+| 16 | PA11[PA9] | bidirectional | 5V-tolerant FT_fa (Fm+ capable) GPIO pin, default PA11 remappable to the PA9 function via SYSCFG_CFGR1, with alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BK2, I2C2_SCL and additional function ADC_IN15. |+| 17 | PA12[PA10] | bidirectional | 5V-tolerant FT_fa (Fm+ capable) GPIO pin, default PA12 remappable to the PA10 function via SYSCFG_CFGR1, with alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA and additional function ADC_IN16. |+| 18 | PA13 | bidirectional | 5V-tolerant FT_ea GPIO pin configured by default at reset as the SWDIO debug data pin (internal pull-up active), with alternate functions IR_OUT, EVENTOUT and additional function ADC_IN17. |+| 19 | PA15/PA14-BOOT0 | bidirectional | 5V-tolerant GPIO package pin bonding die pads PA14-BOOT0 (FT_a, default SWCLK debug clock at reset with internal pull-down active; AF USART2_TX, EVENTOUT; additional ADC_IN18 and BOOT0 boot-mode selection) and PA15 (FT; AF SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, EVENTOUT) onto the same TSSOP20 pin. |+| 20 | PB3/PB4/PB5/PB6 | bidirectional | 5V-tolerant GPIO package pin bonding die pads PB3 (FT; SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART1_RTS_DE_CK, EVENTOUT), PB4 (FT; SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BK, EVENTOUT), PB5 (FT; SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BK, LPTIM1_IN1, I2C1_SMBA; WKUP6) and PB6 (FT_f, Fm+ capable; USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR, I2C1_SCL, EVENTOUT) onto the same TSSOP20 pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | TSSOP-20 |+| Category | Embedded Processors & Controllers |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `STM32G031F6P6`+- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`+- 3D model: TSSOP-20 (KiCad packages3D, STEP)+- 3D model files: `stm32g031f6p6-etched.step` / `stm32g031f6p6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g031f6p6.step` / `stm32g031f6p6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893078433746944) (117 pp, sha256 `0fc5e46abdba3d02`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g031f6p6-datasheet.pdf)
page.jsonadded+215
@@ -0,0 +1,215 @@+{+  "slug": "stm32g031f6p6",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), TSSOP-20. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "embedded processors & controllers",+    "stm32g031f6p6",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm32g031f6p6.kicad_sym",+    "stm32g031f6p6.kicad_mod",+    "stm32g031f6p6.glb",+    "stm32g031f6p6.step",+    "stm32g031f6p6.lbr",+    "docs/hero.png",+    "docs/stm32g031f6p6-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM32G031F6P6",+    "manufacturer": "STMicroelectronics",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Embedded Processors & Controllers",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893078433746944",+    "parts": {+      "symbol": "stm32g031f6p6.kicad_sym",+      "footprint": "stm32g031f6p6.kicad_mod",+      "model_3d": "stm32g031f6p6-etched.glb",+      "model_3d_plain": "stm32g031f6p6.glb",+      "model_3d_step": "stm32g031f6p6-etched.step",+      "model_3d_step_plain": "stm32g031f6p6.step",+      "lbr": "stm32g031f6p6.lbr"+    },+    "distributor_links": {+      "lcsc": "C529333"+    },+    "pins": [+      {+        "number": "1",+        "name": "PB7/PB8",+        "type": "bidirectional",+        "description": "5V-tolerant FT_fa GPIO package pin bonding die pads PB7 (AF: USART1_RX, SPI2_MOSI, TIM17_CH1N, LPTIM1_IN2, I2C1_SDA, EVENTOUT; additional ADC_IN11, PVD_IN) and PB8 (AF: SPI2_SCK, TIM16_CH1, I2C1_SCL, EVENTOUT) onto the same TSSOP20 pin."+      },+      {+        "number": "2",+        "name": "PC14-OSC32_IN/PB9",+        "type": "bidirectional",+        "description": "5V-tolerant FT GPIO package pin bonding die pads PC14 (LSE 32.768 kHz oscillator input OSC32_IN, also usable as OSC_IN, AF TIM1_BK2) and PB9 (AF: IR_OUT, TIM17_CH1, SPI2_NSS, I2C1_SDA, EVENTOUT) onto the same TSSOP20 pin."+      },+      {+        "number": "3",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "5V-tolerant FT GPIO pin PC15 that provides the LSE 32.768 kHz oscillator output (OSC32_OUT) with OSC32_EN/OSC_EN alternate function."+      },+      {+        "number": "4",+        "name": "VDD/VDDA",+        "type": "power_in",+        "description": "Combined external digital and analog power supply input, 1.7 V (1.6 V min power-on release) to 3.6 V, also supplying the VDDIO1 I/O domain and VDDA analog domain (ADC, voltage reference buffer)."+      },+      {+        "number": "5",+        "name": "VSS/VSSA",+        "type": "power_in",+        "description": "Combined digital and analog ground reference pin for the device."+      },+      {+        "number": "6",+        "name": "PF2-NRST",+        "type": "bidirectional",+        "description": "Bidirectional GPIO PF2 pin with embedded weak pull-up (typ. 40 kΩ) that also functions as the NRST reset input (device reset when held low; filtered pulses under 70 ns are ignored, pulses over 350 ns guarantee reset) and MCO alternate output."+      },+      {+        "number": "7",+        "name": "PA0",+        "type": "bidirectional",+        "description": "5V-tolerant FT_a GPIO pin with alternate functions SPI2_SCK, USART2_CTS, TIM2_CH1_ETR, LPTIM1_OUT and additional functions ADC_IN0, TAMP_IN2, WKUP1."+      },+      {+        "number": "8",+        "name": "PA1",+        "type": "bidirectional",+        "description": "5V-tolerant FT_ea (Fm+/analog-switch capable) GPIO pin with alternate functions SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, I2C1_SMBA, EVENTOUT and additional function ADC_IN1."+      },+      {+        "number": "9",+        "name": "PA2",+        "type": "bidirectional",+        "description": "5V-tolerant FT_a GPIO pin with alternate functions SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, LPUART1_TX and additional functions ADC_IN2, WKUP4, LSCO."+      },+      {+        "number": "10",+        "name": "PA3",+        "type": "bidirectional",+        "description": "5V-tolerant FT_ea GPIO pin with alternate functions SPI2_MISO, USART2_RX, TIM2_CH4, LPUART1_RX, EVENTOUT and additional function ADC_IN3."+      },+      {+        "number": "11",+        "name": "PA4",+        "type": "bidirectional",+        "description": "5V-tolerant FT_a GPIO pin with alternate functions SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, LPTIM2_OUT, EVENTOUT and additional functions ADC_IN4, TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2."+      },+      {+        "number": "12",+        "name": "PA5",+        "type": "bidirectional",+        "description": "5V-tolerant FT_ea GPIO pin with alternate functions SPI1_SCK/I2S1_CK, TIM2_CH1_ETR, LPTIM2_ETR, EVENTOUT and additional function ADC_IN5."+      },+      {+        "number": "13",+        "name": "PA6",+        "type": "bidirectional",+        "description": "5V-tolerant FT_ea GPIO pin with alternate functions SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BK, TIM16_CH1, LPUART1_CTS and additional function ADC_IN6."+      },+      {+        "number": "14",+        "name": "PA7",+        "type": "bidirectional",+        "description": "5V-tolerant FT_a GPIO pin with alternate functions SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1 and additional function ADC_IN7."+      },+      {+        "number": "15",+        "name": "PB0/PB1/PB2/PA8",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO package pin bonding die pads PB0 (FT_ea; SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, LPTIM1_OUT; ADC_IN8), PB1 (FT_ea; TIM14_CH1, TIM3_CH4, TIM1_CH3N, LPTIM2_IN1, LPUART1_RTS_DE, EVENTOUT; ADC_IN9), PB2 (FT_ea; SPI2_MISO, LPTIM1_OUT, EVENTOUT; ADC_IN10) and PA8 (FT; MCO, SPI2_NSS, TIM1_CH1, LPTIM2_OUT, EVENTOUT) onto the same TSSOP20 pin."+      },+      {+        "number": "16",+        "name": "PA11[PA9]",+        "type": "bidirectional",+        "description": "5V-tolerant FT_fa (Fm+ capable) GPIO pin, default PA11 remappable to the PA9 function via SYSCFG_CFGR1, with alternate functions SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BK2, I2C2_SCL and additional function ADC_IN15."+      },+      {+        "number": "17",+        "name": "PA12[PA10]",+        "type": "bidirectional",+        "description": "5V-tolerant FT_fa (Fm+ capable) GPIO pin, default PA12 remappable to the PA10 function via SYSCFG_CFGR1, with alternate functions SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA and additional function ADC_IN16."+      },+      {+        "number": "18",+        "name": "PA13",+        "type": "bidirectional",+        "description": "5V-tolerant FT_ea GPIO pin configured by default at reset as the SWDIO debug data pin (internal pull-up active), with alternate functions IR_OUT, EVENTOUT and additional function ADC_IN17."+      },+      {+        "number": "19",+        "name": "PA15/PA14-BOOT0",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO package pin bonding die pads PA14-BOOT0 (FT_a, default SWCLK debug clock at reset with internal pull-down active; AF USART2_TX, EVENTOUT; additional ADC_IN18 and BOOT0 boot-mode selection) and PA15 (FT; AF SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, EVENTOUT) onto the same TSSOP20 pin."+      },+      {+        "number": "20",+        "name": "PB3/PB4/PB5/PB6",+        "type": "bidirectional",+        "description": "5V-tolerant GPIO package pin bonding die pads PB3 (FT; SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART1_RTS_DE_CK, EVENTOUT), PB4 (FT; SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BK, EVENTOUT), PB5 (FT; SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BK, LPTIM1_IN1, I2C1_SMBA; WKUP6) and PB6 (FT_f, Fm+ capable; USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR, I2C1_SCL, EVENTOUT) onto the same TSSOP20 pin."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Figure 8 on page 34 shows multiple alternate pin names grouped with slashes (e.g., PB7/PB8, PB3/PB4/; TSSOP20 package exposes 18 GPIO pins plus 2 power pins (VDD/VDDA and VSS/VSSA). The specific GPIO av; PC14-OSC32_IN is mentioned in Figure 8 with Pin 14 but Table 12 indicates PC14 is not in the TSSOP20"+        ],+        "pages_sent": 117,+        "cost_usd": 1.3493,+        "at": "2026-09-24T08:30:42"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893078433746944",+        "pages": 117,+        "sha256": "0fc5e46abdba3d02",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file