component
STM32G031C8T6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+84@@ -0,0 +1,84 @@+# STM32G031C8T6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM32G031C8T6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PC13 | bidirectional | 5V-tolerant general-purpose I/O also usable as TIM1_BK break input, TAMP_IN1 tamper input, RTC_TS timestamp input, RTC_OUT1 calendar output, or WKUP2 wakeup source. |+| 2 | PC14-OSC32_IN | bidirectional | 5V-tolerant I/O that defaults to PC14 and can be configured as TIM1_BK2 break input or as OSC32_IN input for the 32.768 kHz LSE crystal oscillator. |+| 3 | PC15-OSC32_OUT | bidirectional | 5V-tolerant I/O that can be configured as OSC32_EN/OSC_EN oscillator enable or as OSC32_OUT output for the 32.768 kHz LSE crystal oscillator. |+| 4 | VBAT | power_in | Backup battery supply input for the RTC, LSE oscillator and backup registers, accepting 1.55 V to 3.6 V when VDD is not present. |+| 5 | VREF+ | power_in | Positive reference voltage pin for the ADC, or output of the internal VREFBUF reference buffer (2.048 V or 2.5 V); must equal VDDA when VDDA < 2 V or be between 2 V and VDDA when VDDA ≥ 2 V. |+| 6 | VDD/VDDA | power_in | Main digital and analog supply input, requiring 1.7 V (1.6 V minimum) to 3.6 V for VDD and 1.62 V to 3.6 V for VDDA ADC operation. |+| 7 | VSS/VSSA | power_in | Common digital and analog ground reference pin. |+| 8 | PF0-OSC_IN | bidirectional | 5V-tolerant I/O that defaults to PF0 and can be configured as TIM14_CH1 or as OSC_IN input for the 4-48 MHz HSE crystal oscillator. |+| 9 | PF1-OSC_OUT | bidirectional | 5V-tolerant I/O that can be configured as OSC_EN oscillator enable or as OSC_OUT output for the 4-48 MHz HSE crystal oscillator. |+| 10 | PF2-NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor, also usable as MCO clock output, driven low (VIL(NRST) ≤0.3×VDDIO1) to reset the device. |+| 11 | PA0 | bidirectional | 5V-tolerant fast I/O (FT_a) usable as SPI2_SCK, USART2_CTS, TIM2_CH1_ETR, LPTIM1_OUT, ADC_IN0 analog input, TAMP_IN2 tamper input, or WKUP1 wakeup source. |+| 12 | PA1 | bidirectional | 5V-tolerant I/O (FT_ea, Fm+/analog-switch capable) usable as SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, I2C1_SMBA, EVENTOUT, or ADC_IN1 analog input. |+| 13 | PA2 | bidirectional | 5V-tolerant fast I/O (FT_a) usable as SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, LPUART1_TX, ADC_IN2 analog input, WKUP4 wakeup source, or LSCO low-speed clock output. |+| 14 | PA3 | bidirectional | 5V-tolerant I/O (FT_ea) usable as SPI2_MISO, USART2_RX, TIM2_CH4, LPUART1_RX, EVENTOUT, or ADC_IN3 analog input. |+| 15 | PA4 | bidirectional | 5V-tolerant fast I/O (FT_a) usable as SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, LPTIM2_OUT, EVENTOUT, ADC_IN4 analog input, or RTC_OUT2 calendar output. |+| 16 | PA5 | bidirectional | 5V-tolerant I/O (FT_ea) usable as SPI1_SCK/I2S1_CK, TIM2_CH1_ETR, LPTIM2_ETR, EVENTOUT, or ADC_IN5 analog input. |+| 17 | PA6 | bidirectional | 5V-tolerant I/O (FT_ea) usable as SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BK, TIM16_CH1, LPUART1_CTS, or ADC_IN6 analog input. |+| 18 | PA7 | bidirectional | 5V-tolerant fast I/O (FT_a) usable as SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1, or ADC_IN7 analog input. |+| 19 | PB0 | bidirectional | 5V-tolerant I/O (FT_ea) usable as SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, LPTIM1_OUT, or ADC_IN8 analog input. |+| 20 | PB1 | bidirectional | 5V-tolerant I/O (FT_ea) usable as TIM14_CH1, TIM3_CH4, TIM1_CH3N, LPTIM2_IN1, LPUART1_RTS_DE, EVENTOUT, or ADC_IN9 analog input. |+| 21 | PB2 | bidirectional | 5V-tolerant I/O (FT_ea) usable as SPI2_MISO, LPTIM1_OUT, EVENTOUT, or ADC_IN10 analog input. |+| 22 | PB10 | bidirectional | 5V-tolerant Fm+ I/O (FT_fa) usable as LPUART1_RX, TIM2_CH3, SPI2_SCK, I2C2_SCL, or ADC_IN11 analog input. |+| 23 | PB11 | bidirectional | 5V-tolerant Fm+ I/O (FT_fa) usable as SPI2_MOSI, LPUART1_TX, TIM2_CH4, I2C2_SDA, or ADC_IN15 analog input. |+| 24 | PB12 | bidirectional | 5V-tolerant fast I/O (FT_a) usable as SPI2_NSS, LPUART1_RTS_DE, TIM1_BK, EVENTOUT, or ADC_IN16 analog input. |+| 25 | PB13 | bidirectional | 5V-tolerant Fm+ I/O (FT_f) usable as SPI2_SCK, LPUART1_CTS, TIM1_CH1N, I2C2_SCL, or EVENTOUT. |+| 26 | PB14 | bidirectional | 5V-tolerant Fm+ I/O (FT_f) usable as SPI2_MISO, TIM1_CH2N, I2C2_SDA, or EVENTOUT. |+| 27 | PB15 | bidirectional | 5V-tolerant I/O usable as SPI2_MOSI, TIM1_CH3N, EVENTOUT, or RTC_REFIN reference clock input for calendar calibration. |+| 28 | PA8 | bidirectional | 5V-tolerant I/O usable as MCO clock output, SPI2_NSS, TIM1_CH1, LPTIM2_OUT, or EVENTOUT. |+| 29 | PA9 | bidirectional | 5V-tolerant Fm+ I/O (FT_f) usable as MCO clock output, USART1_TX, TIM1_CH2, SPI2_MISO, I2C1_SCL, or EVENTOUT. |+| 30 | PC6 | bidirectional | 5V-tolerant I/O usable as TIM3_CH1 or TIM2_CH3 timer input capture/output compare. |+| 31 | PC7 | bidirectional | 5V-tolerant I/O usable as TIM3_CH2 or TIM2_CH4 timer input capture/output compare. |+| 32 | PA10 | bidirectional | 5V-tolerant Fm+ I/O (FT_f) usable as SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BK, I2C1_SDA, or EVENTOUT. |+| 33 | PA11 [PA9] | bidirectional | 5V-tolerant Fm+ I/O (FT_f, remappable to PA9) usable as SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BK2, or I2C2_SCL. |+| 34 | PA12 [PA10] | bidirectional | 5V-tolerant Fm+ I/O (FT_f, remappable to PA10) usable as SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, or I2C2_SDA. |+| 35 | PA13 | bidirectional | 5V-tolerant I/O (FT_ea) usable as SWDIO serial-wire debug data, IR_OUT, EVENTOUT, or ADC_IN17 analog input. |+| 36 | PA14-BOOT0 | bidirectional | 5V-tolerant fast I/O (FT_a) usable as SWCLK serial-wire debug clock, USART2_TX, EVENTOUT, ADC_IN18 analog input, or BOOT0 boot-mode selection. |+| 37 | PA15 | bidirectional | 5V-tolerant I/O usable as SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, or EVENTOUT. |+| 38 | PD0 | bidirectional | 5V-tolerant I/O usable as EVENTOUT, SPI2_NSS, or TIM16_CH1. |+| 39 | PD1 | bidirectional | 5V-tolerant I/O usable as EVENTOUT, SPI2_SCK, or TIM17_CH1. |+| 40 | PD2 | bidirectional | 5V-tolerant I/O usable as TIM3_ETR or TIM1_CH1N. |+| 41 | PD3 | bidirectional | 5V-tolerant I/O usable as USART2_CTS, SPI2_MISO, or TIM1_CH2N. |+| 42 | PB3 | bidirectional | 5V-tolerant I/O usable as SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART1_RTS_DE_CK, or EVENTOUT. |+| 43 | PB4 | bidirectional | 5V-tolerant I/O usable as SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BK, or EVENTOUT. |+| 44 | PB5 | bidirectional | 5V-tolerant I/O usable as SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BK, LPTIM1_IN1, I2C1_SMBA, or WKUP6 wakeup source. |+| 45 | PB6 | bidirectional | 5V-tolerant Fm+ I/O (FT_f) usable as USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR, I2C1_SCL, or EVENTOUT. |+| 46 | PB7 | bidirectional | 5V-tolerant Fm+ I/O (FT_f) usable as USART1_RX, SPI2_MOSI, TIM17_CH1N, LPTIM1_IN2, I2C1_SDA, EVENTOUT, or PVD_IN programmable voltage detector input. |+| 47 | PB8 | bidirectional | 5V-tolerant Fm+ I/O (FT_f) usable as SPI2_SCK, TIM16_CH1, I2C1_SCL, or EVENTOUT. |+| 48 | PB9 | bidirectional | 5V-tolerant Fm+ I/O (FT_f) usable as IR_OUT, TIM17_CH1, SPI2_NSS, I2C1_SDA, or EVENTOUT. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM32G031C8T6`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm32g031c8t6-etched.step` / `stm32g031c8t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g031c8t6.step` / `stm32g031c8t6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884840482033664) (117 pp, sha256 `95ae804dbf135590`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g031c8t6-datasheet.pdf)
page.jsonadded+383@@ -0,0 +1,383 @@+{+ "slug": "stm32g031c8t6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32g031c8t6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32g031c8t6.kicad_sym",+ "stm32g031c8t6.kicad_mod",+ "stm32g031c8t6.glb",+ "stm32g031c8t6.step",+ "stm32g031c8t6.lbr",+ "docs/hero.png",+ "docs/stm32g031c8t6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32G031C8T6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884840482033664",+ "parts": {+ "symbol": "stm32g031c8t6.kicad_sym",+ "footprint": "stm32g031c8t6.kicad_mod",+ "model_3d": "stm32g031c8t6-etched.glb",+ "model_3d_plain": "stm32g031c8t6.glb",+ "model_3d_step": "stm32g031c8t6-etched.step",+ "model_3d_step_plain": "stm32g031c8t6.step",+ "lbr": "stm32g031c8t6.lbr"+ },+ "distributor_links": {+ "lcsc": "C432205"+ },+ "pins": [+ {+ "number": "1",+ "name": "PC13",+ "type": "bidirectional",+ "description": "5V-tolerant general-purpose I/O also usable as TIM1_BK break input, TAMP_IN1 tamper input, RTC_TS timestamp input, RTC_OUT1 calendar output, or WKUP2 wakeup source."+ },+ {+ "number": "2",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "5V-tolerant I/O that defaults to PC14 and can be configured as TIM1_BK2 break input or as OSC32_IN input for the 32.768 kHz LSE crystal oscillator."+ },+ {+ "number": "3",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "5V-tolerant I/O that can be configured as OSC32_EN/OSC_EN oscillator enable or as OSC32_OUT output for the 32.768 kHz LSE crystal oscillator."+ },+ {+ "number": "4",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup battery supply input for the RTC, LSE oscillator and backup registers, accepting 1.55 V to 3.6 V when VDD is not present."+ },+ {+ "number": "5",+ "name": "VREF+",+ "type": "power_in",+ "description": "Positive reference voltage pin for the ADC, or output of the internal VREFBUF reference buffer (2.048 V or 2.5 V); must equal VDDA when VDDA < 2 V or be between 2 V and VDDA when VDDA ≥ 2 V."+ },+ {+ "number": "6",+ "name": "VDD/VDDA",+ "type": "power_in",+ "description": "Main digital and analog supply input, requiring 1.7 V (1.6 V minimum) to 3.6 V for VDD and 1.62 V to 3.6 V for VDDA ADC operation."+ },+ {+ "number": "7",+ "name": "VSS/VSSA",+ "type": "power_in",+ "description": "Common digital and analog ground reference pin."+ },+ {+ "number": "8",+ "name": "PF0-OSC_IN",+ "type": "bidirectional",+ "description": "5V-tolerant I/O that defaults to PF0 and can be configured as TIM14_CH1 or as OSC_IN input for the 4-48 MHz HSE crystal oscillator."+ },+ {+ "number": "9",+ "name": "PF1-OSC_OUT",+ "type": "bidirectional",+ "description": "5V-tolerant I/O that can be configured as OSC_EN oscillator enable or as OSC_OUT output for the 4-48 MHz HSE crystal oscillator."+ },+ {+ "number": "10",+ "name": "PF2-NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset pin with embedded weak pull-up resistor, also usable as MCO clock output, driven low (VIL(NRST) ≤0.3×VDDIO1) to reset the device."+ },+ {+ "number": "11",+ "name": "PA0",+ "type": "bidirectional",+ "description": "5V-tolerant fast I/O (FT_a) usable as SPI2_SCK, USART2_CTS, TIM2_CH1_ETR, LPTIM1_OUT, ADC_IN0 analog input, TAMP_IN2 tamper input, or WKUP1 wakeup source."+ },+ {+ "number": "12",+ "name": "PA1",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT_ea, Fm+/analog-switch capable) usable as SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, I2C1_SMBA, EVENTOUT, or ADC_IN1 analog input."+ },+ {+ "number": "13",+ "name": "PA2",+ "type": "bidirectional",+ "description": "5V-tolerant fast I/O (FT_a) usable as SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, LPUART1_TX, ADC_IN2 analog input, WKUP4 wakeup source, or LSCO low-speed clock output."+ },+ {+ "number": "14",+ "name": "PA3",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT_ea) usable as SPI2_MISO, USART2_RX, TIM2_CH4, LPUART1_RX, EVENTOUT, or ADC_IN3 analog input."+ },+ {+ "number": "15",+ "name": "PA4",+ "type": "bidirectional",+ "description": "5V-tolerant fast I/O (FT_a) usable as SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, LPTIM2_OUT, EVENTOUT, ADC_IN4 analog input, or RTC_OUT2 calendar output."+ },+ {+ "number": "16",+ "name": "PA5",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT_ea) usable as SPI1_SCK/I2S1_CK, TIM2_CH1_ETR, LPTIM2_ETR, EVENTOUT, or ADC_IN5 analog input."+ },+ {+ "number": "17",+ "name": "PA6",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT_ea) usable as SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BK, TIM16_CH1, LPUART1_CTS, or ADC_IN6 analog input."+ },+ {+ "number": "18",+ "name": "PA7",+ "type": "bidirectional",+ "description": "5V-tolerant fast I/O (FT_a) usable as SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1, or ADC_IN7 analog input."+ },+ {+ "number": "19",+ "name": "PB0",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT_ea) usable as SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, LPTIM1_OUT, or ADC_IN8 analog input."+ },+ {+ "number": "20",+ "name": "PB1",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT_ea) usable as TIM14_CH1, TIM3_CH4, TIM1_CH3N, LPTIM2_IN1, LPUART1_RTS_DE, EVENTOUT, or ADC_IN9 analog input."+ },+ {+ "number": "21",+ "name": "PB2",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT_ea) usable as SPI2_MISO, LPTIM1_OUT, EVENTOUT, or ADC_IN10 analog input."+ },+ {+ "number": "22",+ "name": "PB10",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_fa) usable as LPUART1_RX, TIM2_CH3, SPI2_SCK, I2C2_SCL, or ADC_IN11 analog input."+ },+ {+ "number": "23",+ "name": "PB11",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_fa) usable as SPI2_MOSI, LPUART1_TX, TIM2_CH4, I2C2_SDA, or ADC_IN15 analog input."+ },+ {+ "number": "24",+ "name": "PB12",+ "type": "bidirectional",+ "description": "5V-tolerant fast I/O (FT_a) usable as SPI2_NSS, LPUART1_RTS_DE, TIM1_BK, EVENTOUT, or ADC_IN16 analog input."+ },+ {+ "number": "25",+ "name": "PB13",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f) usable as SPI2_SCK, LPUART1_CTS, TIM1_CH1N, I2C2_SCL, or EVENTOUT."+ },+ {+ "number": "26",+ "name": "PB14",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f) usable as SPI2_MISO, TIM1_CH2N, I2C2_SDA, or EVENTOUT."+ },+ {+ "number": "27",+ "name": "PB15",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as SPI2_MOSI, TIM1_CH3N, EVENTOUT, or RTC_REFIN reference clock input for calendar calibration."+ },+ {+ "number": "28",+ "name": "PA8",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as MCO clock output, SPI2_NSS, TIM1_CH1, LPTIM2_OUT, or EVENTOUT."+ },+ {+ "number": "29",+ "name": "PA9",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f) usable as MCO clock output, USART1_TX, TIM1_CH2, SPI2_MISO, I2C1_SCL, or EVENTOUT."+ },+ {+ "number": "30",+ "name": "PC6",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as TIM3_CH1 or TIM2_CH3 timer input capture/output compare."+ },+ {+ "number": "31",+ "name": "PC7",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as TIM3_CH2 or TIM2_CH4 timer input capture/output compare."+ },+ {+ "number": "32",+ "name": "PA10",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f) usable as SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BK, I2C1_SDA, or EVENTOUT."+ },+ {+ "number": "33",+ "name": "PA11 [PA9]",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f, remappable to PA9) usable as SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BK2, or I2C2_SCL."+ },+ {+ "number": "34",+ "name": "PA12 [PA10]",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f, remappable to PA10) usable as SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, or I2C2_SDA."+ },+ {+ "number": "35",+ "name": "PA13",+ "type": "bidirectional",+ "description": "5V-tolerant I/O (FT_ea) usable as SWDIO serial-wire debug data, IR_OUT, EVENTOUT, or ADC_IN17 analog input."+ },+ {+ "number": "36",+ "name": "PA14-BOOT0",+ "type": "bidirectional",+ "description": "5V-tolerant fast I/O (FT_a) usable as SWCLK serial-wire debug clock, USART2_TX, EVENTOUT, ADC_IN18 analog input, or BOOT0 boot-mode selection."+ },+ {+ "number": "37",+ "name": "PA15",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, or EVENTOUT."+ },+ {+ "number": "38",+ "name": "PD0",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as EVENTOUT, SPI2_NSS, or TIM16_CH1."+ },+ {+ "number": "39",+ "name": "PD1",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as EVENTOUT, SPI2_SCK, or TIM17_CH1."+ },+ {+ "number": "40",+ "name": "PD2",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as TIM3_ETR or TIM1_CH1N."+ },+ {+ "number": "41",+ "name": "PD3",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as USART2_CTS, SPI2_MISO, or TIM1_CH2N."+ },+ {+ "number": "42",+ "name": "PB3",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART1_RTS_DE_CK, or EVENTOUT."+ },+ {+ "number": "43",+ "name": "PB4",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BK, or EVENTOUT."+ },+ {+ "number": "44",+ "name": "PB5",+ "type": "bidirectional",+ "description": "5V-tolerant I/O usable as SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BK, LPTIM1_IN1, I2C1_SMBA, or WKUP6 wakeup source."+ },+ {+ "number": "45",+ "name": "PB6",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f) usable as USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR, I2C1_SCL, or EVENTOUT."+ },+ {+ "number": "46",+ "name": "PB7",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f) usable as USART1_RX, SPI2_MOSI, TIM17_CH1N, LPTIM1_IN2, I2C1_SDA, EVENTOUT, or PVD_IN programmable voltage detector input."+ },+ {+ "number": "47",+ "name": "PB8",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f) usable as SPI2_SCK, TIM16_CH1, I2C1_SCL, or EVENTOUT."+ },+ {+ "number": "48",+ "name": "PB9",+ "type": "bidirectional",+ "description": "5V-tolerant Fm+ I/O (FT_f) usable as IR_OUT, TIM17_CH1, SPI2_NSS, I2C1_SDA, or EVENTOUT."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbering discrepancy between Figure 3 pinout diagram and Table 12 assignment table; relied on F"+ ],+ "pages_sent": 117,+ "cost_usd": 1.273,+ "at": "2026-09-23T11:05:53"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884840482033664",+ "pages": 117,+ "sha256": "95ae804dbf135590",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}