← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# STM32G030J6M6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · SOP-8++STM32G030J6M6 from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PC14-OSC32_IN | bidirectional | 32 kHz oscillator input pin capable of TIM1 break function OSC32_IN; GPIO pads PB7, PB8, PB9 bonded to same package pin. |+| 2 | VDD/VDDA | power_in | Positive power supply pin for analog and digital I/O, operating range 2.0 to 3.6 V. |+| 3 | VSS/VSSA | power_in | Ground reference pin for analog and digital circuits. |+| 4 | NRST | bidirectional | Bidirectional reset input with embedded weak pull-up; GPIO pads PA0, PA1, PA2 bonded on same pin but not usable per note 3 (Table 12). |+| 5 | PA8 | bidirectional | General-purpose I/O supporting MCO, SPI2 slave select, TIM1 channel 1, event output; GPIO pads PA11[PA9], PB0, PB1 bonded to same pin. |+| 6 | PA12 [PA10] | bidirectional | General-purpose I/O with analog switch supporting SPI1/I2S data, UART1 request-to-send, TIM1 external trigger, I2C2 data, and ADC input channel 16; PA10 can be remapped via SYSCFG_CFGR1. |+| 7 | PA13 | bidirectional | Serial Wire Debug I/O (SWDIO) pin with internal pull-up resistor; supports infrared output and ADC input channel 17. |+| 8 | PA14-BOOT0 | bidirectional | Serial Wire Debug clock input (SWCLK) and boot mode selector pin; GPIO pads PA15, PB5, PB6 bonded to same pin supporting UART, SPI, timer, and I2C functions. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOP-8 |+| Category | Embedded Processors & Controllers |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `STM32G030J6M6`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)+- 3D model files: `stm32g030j6m6-etched.step` / `stm32g030j6m6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g030j6m6.step` / `stm32g030j6m6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588917304289865728) (93 pp, sha256 `bd4d70f72b2e82c5`, retrieved 2026-10-06, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32g030j6m6-datasheet.pdf)
page.jsonadded+159@@ -0,0 +1,159 @@+{+ "slug": "stm32g030j6m6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), SOP-8. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32g030j6m6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32g030j6m6.kicad_sym",+ "stm32g030j6m6.kicad_mod",+ "stm32g030j6m6.glb",+ "stm32g030j6m6.step",+ "stm32g030j6m6.lbr",+ "docs/hero.png",+ "docs/stm32g030j6m6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm32g030j6m6-hero.glb",+ "stm32g030j6m6-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM32G030J6M6",+ "manufacturer": "STMicroelectronics",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588917304289865728",+ "parts": {+ "symbol": "stm32g030j6m6.kicad_sym",+ "footprint": "stm32g030j6m6.kicad_mod",+ "model_3d": "stm32g030j6m6-hero.glb",+ "model_3d_plain": "stm32g030j6m6.glb",+ "model_3d_step": "stm32g030j6m6-etched.step",+ "model_3d_step_plain": "stm32g030j6m6.step",+ "lbr": "stm32g030j6m6.lbr"+ },+ "distributor_links": {+ "lcsc": 724041,+ "digikey": "497-STM32G030J6M6-ND",+ "mouser": "511-STM32G030J6M6"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T03:40:56Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-STM32G030J6M6-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "511-STM32G030J6M6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "32 kHz oscillator input pin capable of TIM1 break function OSC32_IN; GPIO pads PB7, PB8, PB9 bonded to same package pin."+ },+ {+ "number": "2",+ "name": "VDD/VDDA",+ "type": "power_in",+ "description": "Positive power supply pin for analog and digital I/O, operating range 2.0 to 3.6 V."+ },+ {+ "number": "3",+ "name": "VSS/VSSA",+ "type": "power_in",+ "description": "Ground reference pin for analog and digital circuits."+ },+ {+ "number": "4",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Bidirectional reset input with embedded weak pull-up; GPIO pads PA0, PA1, PA2 bonded on same pin but not usable per note 3 (Table 12)."+ },+ {+ "number": "5",+ "name": "PA8",+ "type": "bidirectional",+ "description": "General-purpose I/O supporting MCO, SPI2 slave select, TIM1 channel 1, event output; GPIO pads PA11[PA9], PB0, PB1 bonded to same pin."+ },+ {+ "number": "6",+ "name": "PA12 [PA10]",+ "type": "bidirectional",+ "description": "General-purpose I/O with analog switch supporting SPI1/I2S data, UART1 request-to-send, TIM1 external trigger, I2C2 data, and ADC input channel 16; PA10 can be remapped via SYSCFG_CFGR1."+ },+ {+ "number": "7",+ "name": "PA13",+ "type": "bidirectional",+ "description": "Serial Wire Debug I/O (SWDIO) pin with internal pull-up resistor; supports infrared output and ADC input channel 17."+ },+ {+ "number": "8",+ "name": "PA14-BOOT0",+ "type": "bidirectional",+ "description": "Serial Wire Debug clock input (SWCLK) and boot mode selector pin; GPIO pads PA15, PB5, PB6 bonded to same pin supporting UART, SPI, timer, and I2C functions."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Multiple GPIO pads bonded to single physical pins: pin 1 has PB7/PB8/PB9 bonded with oscillator; pin; GPIO pads PA0, PA1, PA2 bonded to pin 4 (NRST) but documented as not usable—confirm whether these sh; Alternative pin mappings via SYSCFG_CFGR1 register (PA9↔PA11, PA10↔PA12) documented for LQFP variant"+ ],+ "pages_sent": 39,+ "cost_usd": 0.3669,+ "at": "2026-10-06T03:40:42"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588917304289865728",+ "pages": 93,+ "sha256": "bd4d70f72b2e82c5",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}