component
STM32G030J6M6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), SOP-8. Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32G030J6M6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · SOP-8
STM32G030J6M6 from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC14-OSC32_IN | bidirectional | 32 kHz oscillator input pin capable of TIM1 break function OSC32_IN; GPIO pads PB7, PB8, PB9 bonded to same package pin. |
| 2 | VDD/VDDA | power_in | Positive power supply pin for analog and digital I/O, operating range 2.0 to 3.6 V. |
| 3 | VSS/VSSA | power_in | Ground reference pin for analog and digital circuits. |
| 4 | NRST | bidirectional | Bidirectional reset input with embedded weak pull-up; GPIO pads PA0, PA1, PA2 bonded on same pin but not usable per note 3 (Table 12). |
| 5 | PA8 | bidirectional | General-purpose I/O supporting MCO, SPI2 slave select, TIM1 channel 1, event output; GPIO pads PA11[PA9], PB0, PB1 bonded to same pin. |
| 6 | PA12 [PA10] | bidirectional | General-purpose I/O with analog switch supporting SPI1/I2S data, UART1 request-to-send, TIM1 external trigger, I2C2 data, and ADC input channel 16; PA10 can be remapped via SYSCFG_CFGR1. |
| 7 | PA13 | bidirectional | Serial Wire Debug I/O (SWDIO) pin with internal pull-up resistor; supports infrared output and ADC input channel 17. |
| 8 | PA14-BOOT0 | bidirectional | Serial Wire Debug clock input (SWCLK) and boot mode selector pin; GPIO pads PA15, PB5, PB6 bonded to same pin supporting UART, SPI, timer, and I2C functions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
STM32G030J6M6 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
stm32g030j6m6-etched.step/stm32g030j6m6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32g030j6m6.step/stm32g030j6m6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (93 pp, sha256
bd4d70f72b2e82c5, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).