component
STM32F767BIT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-208(28x28). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+244@@ -0,0 +1,244 @@+# STM32F767BIT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-208(28x28)++STM32F767BIT6 from STMicroelectronics, in a LQFP-208(28x28). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PE2 | bidirectional | GPIO PE2, 5V-tolerant, can function as TRACECLK, SPI4_SCK, SAI1_MCLK_A, QUADSPI_BK1_IO2, ETH_MII_TXD3, FMC_A23, or EVENTOUT. |+| 2 | PE3 | bidirectional | GPIO PE3, 5V-tolerant, can function as TRACED0, SAI1_SD_B, FMC_A19, or EVENTOUT. |+| 3 | PE4 | bidirectional | GPIO PE4, 5V-tolerant, can function as TRACED1, SPI4_NSS, SAI1_FS_A, DFSDM1_DATIN3, FMC_A20, DCMI_D4, LCD_B0, or EVENTOUT. |+| 4 | PE5 | bidirectional | GPIO PE5, 5V-tolerant, can function as TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, DFSDM1_CKIN3, FMC_A21, DCMI_D6, LCD_G0, or EVENTOUT. |+| 5 | PE6 | bidirectional | GPIO PE6, 5V-tolerant, can function as TRACED3, TIM1_BKIN2, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCLK_B, FMC_A22, DCMI_D7, LCD_G1, or EVENTOUT. |+| 6 | VBAT | power_in | Backup battery supply voltage pin, 1.7V to 3.6V. |+| 7 | PI8 | bidirectional | GPIO PI8, 5V-tolerant, can function as EVENTOUT, RTC_TAMP2, RTC_TS, or WKUP5. |+| 8 | PC13 | bidirectional | GPIO PC13, 5V-tolerant with limited output drive via power switch (max 2 MHz, 30 pF load), can function as EVENTOUT, RTC_TAMP1, RTC_TS, RTC_OUT, or WKUP4. |+| 9 | PC14-OSC32_IN | bidirectional | GPIO PC14, 5V-tolerant except in analog/oscillator mode, can function as EVENTOUT or OSC32_IN for 32 kHz oscillator. |+| 10 | PC15-OSC32_OUT | bidirectional | GPIO PC15, 5V-tolerant except in analog/oscillator mode, can function as EVENTOUT or OSC32_OUT for 32 kHz oscillator. |+| 11 | PI9 | bidirectional | GPIO PI9, 5V-tolerant, can function as UART4_RX, CAN1_RX, FMC_D30, LCD_VSYNC, or EVENTOUT. |+| 12 | PI10 | bidirectional | GPIO PI10, 5V-tolerant, can function as ETH_MII_RX_ER, FMC_D31, LCD_HSYNC, or EVENTOUT. |+| 13 | PI11 | bidirectional | GPIO PI11, 5V-tolerant, wakeup capable, can function as LCD_G6, OTG_HS_ULPI_DIR, or EVENTOUT. |+| 14 | VSS | power_in | Ground (GND) pin. |+| 15 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 16 | PF0 | bidirectional | GPIO PF0, 5V-tolerant, can function as I2C2_SDA, FMC_A0, or EVENTOUT. |+| 17 | PF1 | bidirectional | GPIO PF1, 5V-tolerant, can function as I2C2_SCL, FMC_A1, or EVENTOUT. |+| 18 | PF2 | bidirectional | GPIO PF2, 5V-tolerant, can function as I2C2_SMBA, FMC_A2, or EVENTOUT. |+| 19 | PI12 | bidirectional | GPIO PI12, 5V-tolerant, can function as LCD_HSYNC or EVENTOUT. |+| 20 | PI13 | bidirectional | GPIO PI13, 5V-tolerant, can function as LCD_VSYNC or EVENTOUT. |+| 21 | PI14 | bidirectional | GPIO PI14, 5V-tolerant, can function as LCD_CLK or EVENTOUT. |+| 22 | PF3 | bidirectional | GPIO PF3, 5V-tolerant, can function as FMC_A3 or EVENTOUT, with ADC3_IN9 analog input. |+| 23 | PF4 | bidirectional | GPIO PF4, 5V-tolerant, can function as FMC_A4 or EVENTOUT, with ADC3_IN14 analog input. |+| 24 | PF5 | bidirectional | GPIO PF5, 5V-tolerant, can function as FMC_A5 or EVENTOUT, with ADC3_IN15 analog input. |+| 25 | VSS | power_in | Ground (GND) pin. |+| 26 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 27 | PF6 | bidirectional | GPIO PF6, 5V-tolerant, can function as TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_RX, QUADSPI_BK1_IO3, or EVENTOUT, with ADC3_IN4 analog input. |+| 28 | PF7 | bidirectional | GPIO PF7, 5V-tolerant, can function as TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_TX, QUADSPI_BK1_IO2, or EVENTOUT, with ADC3_IN5 analog input. |+| 29 | PF8 | bidirectional | GPIO PF8, 5V-tolerant, can function as SPI5_MISO, SAI1_SCK_B, UART7_RTS, TIM13_CH1, QUADSPI_BK1_IO0, or EVENTOUT, with ADC3_IN6 analog input. |+| 30 | PF9 | bidirectional | GPIO PF9, 5V-tolerant, can function as SPI5_MOSI, SAI1_FS_B, UART7_CTS, TIM14_CH1, QUADSPI_BK1_IO1, or EVENTOUT, with ADC3_IN7 analog input. |+| 31 | PF10 | bidirectional | GPIO PF10, 5V-tolerant, can function as QUADSPI_CLK, DCMI_D11, LCD_DE, or EVENTOUT, with ADC3_IN8 analog input. |+| 32 | PH0-OSC_IN | bidirectional | GPIO PH0, 5V-tolerant except in oscillator mode, can function as EVENTOUT or OSC_IN for main crystal oscillator (4-26 MHz). |+| 33 | PH1-OSC_OUT | bidirectional | GPIO PH1, 5V-tolerant except in oscillator mode, can function as EVENTOUT or OSC_OUT for main crystal oscillator. |+| 34 | NRST | bidirectional | Reset input pin with internal weak pull-up, active low, supports external reset source and programming. |+| 35 | PC0 | bidirectional | GPIO PC0, 5V-tolerant, can function as DFSDM1_CKIN0, DFSDM1_DATIN4, SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, LCD_R5, or EVENTOUT, with ADC1/2/3_IN10 analog inputs. |+| 36 | PC1 | bidirectional | GPIO PC1, 5V-tolerant, can function as TRACED0, DFSDM1_DATIN0, SPI2_MOSI/I2S2_SD, SAI1_SD_A, DFSDM1_CKIN4, ETH_MDC, MDIOS_MDC, or EVENTOUT, with ADC1/2/3_IN11 analog inputs and RTC_TAMP3/WKUP3. |+| 37 | PC2 | bidirectional | GPIO PC2, 5V-tolerant with limited output drive via power switch, can function as DFSDM1_CKIN1, SPI2_MISO, DFSDM1_CKOUT, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, or EVENTOUT, with ADC1/2/3_IN12 analog inputs. |+| 38 | PC3 | bidirectional | GPIO PC3, 5V-tolerant with limited output drive via power switch, can function as DFSDM1_DATIN1, SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, or EVENTOUT, with ADC1/2/3_IN13 analog inputs. |+| 39 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 40 | VSS | power_in | Ground (GND) pin. |+| 41 | VSSA | power_in | Analog ground pin for ADC and DAC. |+| 42 | VREF+ | power_in | ADC positive reference voltage pin, 1.8V to VDD with recommended decoupling capacitor. |+| 43 | VDDA | power_in | Analog power supply for ADC/DAC, 1.7V to 3.6V with dedicated decoupling capacitor. |+| 44 | PA0-WKUP | bidirectional | GPIO PA0, 5V-tolerant, wakeup capable (WKUP1), can function as TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B, ETH_MII_CRS, or EVENTOUT, with ADC1/2/3_IN0 analog inputs. |+| 45 | PA1 | bidirectional | GPIO PA1, 5V-tolerant, can function as TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCLK_B, ETH_MII_RX_CLK/RMII_REF_CLK, LCD_R2, or EVENTOUT, with ADC1/2/3_IN1 analog inputs. |+| 46 | PA2 | bidirectional | GPIO PA2, 5V-tolerant, wakeup capable (WKUP2), can function as TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B, ETH_MDIO, MDIOS_MDIO, LCD_R1, or EVENTOUT, with ADC1/2/3_IN2 analog inputs. |+| 47 | PH2 | bidirectional | GPIO PH2, 5V-tolerant, can function as LPTIM1_IN2, QUADSPI_BK2_IO0, SAI2_SCK_B, ETH_MII_CRS, FMC_SDCKE0, LCD_R0, or EVENTOUT. |+| 48 | PH3 | bidirectional | GPIO PH3, 5V-tolerant, can function as QUADSPI_BK2_IO1, SAI2_MCLK_B, ETH_MII_COL, FMC_SDNE0, LCD_R1, or EVENTOUT. |+| 49 | PA3 | bidirectional | GPIO PA3, 5V-tolerant, can function as TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, LCD_B2, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, or EVENTOUT, with ADC1/2/3_IN3 analog inputs. |+| 50 | VSS | power_in | Ground (GND) pin. |+| 51 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 52 | PA4 | bidirectional | GPIO PA4, 3.3V-tolerant ADC input, can function as SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, SPI6_NSS, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, or EVENTOUT, with ADC1/2_IN4 and DAC_OUT1. |+| 53 | PA5 | bidirectional | GPIO PA5, 3.3V-tolerant ADC input, can function as TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, SPI6_SCK, OTG_HS_ULPI_CK, LCD_R4, or EVENTOUT, with ADC1/2_IN5 and DAC_OUT2. |+| 54 | PA6 | bidirectional | GPIO PA6, 5V-tolerant, can function as TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, SPI6_MISO, TIM13_CH1, MDIOS_MDC, DCMI_PIXCLK, LCD_G2, or EVENTOUT, with ADC1/2_IN6 analog inputs. |+| 55 | PA7 | bidirectional | GPIO PA7, 5V-tolerant, can function as TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, SPI6_MOSI, TIM14_CH1, ETH_MII_RX_DV/RMII_CRS_DV, FMC_SDNWE, or EVENTOUT, with ADC1/2_IN7 analog inputs. |+| 56 | PC4 | bidirectional | GPIO PC4, 5V-tolerant, can function as DFSDM1_CKIN2, I2S1_MCK, SPDIF_RX2, ETH_MII_RXD0/RMII_RXD0, FMC_SDNE0, or EVENTOUT, with ADC1/2_IN14 analog inputs. |+| 57 | PC5 | bidirectional | GPIO PC5, 5V-tolerant, can function as DFSDM1_DATIN2, SPDIF_RX3, ETH_MII_RXD1/RMII_RXD1, FMC_SDCKE0, or EVENTOUT, with ADC1/2_IN15 analog inputs. |+| 58 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 59 | VSS | power_in | Ground (GND) pin. |+| 60 | PB0 | bidirectional | GPIO PB0, 5V-tolerant, can function as TIM1_CH2N, TIM3_CH3, TIM8_CH2N, DFSDM1_CKOUT, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, LCD_G1, or EVENTOUT, with ADC1/2_IN8 analog inputs. |+| 61 | PB1 | bidirectional | GPIO PB1, 5V-tolerant, can function as TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, LCD_G0, or EVENTOUT, with ADC1/2_IN9 analog inputs. |+| 62 | PB2 | bidirectional | GPIO PB2, 5V-tolerant, can function as SAI1_SD_A, SPI3_MOSI/I2S3_SD, QUADSPI_CLK, DFSDM1_CKIN1, or EVENTOUT. |+| 63 | PF11 | bidirectional | GPIO PF11, 5V-tolerant, can function as SPI5_MOSI, SAI2_SD_B, FMC_SDNRAS, DCMI_D12, or EVENTOUT. |+| 64 | PF12 | bidirectional | GPIO PF12, 5V-tolerant, can function as FMC_A6 or EVENTOUT. |+| 65 | VSS | power_in | Ground (GND) pin. |+| 66 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 67 | PF13 | bidirectional | GPIO PF13, 5V-tolerant, can function as I2C4_SMBA, DFSDM1_DATIN6, FMC_A7, or EVENTOUT. |+| 68 | PF14 | bidirectional | GPIO PF14, 5V-tolerant, can function as I2C4_SCL, DFSDM1_CKIN6, FMC_A8, or EVENTOUT. |+| 69 | PF15 | bidirectional | GPIO PF15, 5V-tolerant, can function as I2C4_SDA, FMC_A9, or EVENTOUT. |+| 70 | PG0 | bidirectional | GPIO PG0, 5V-tolerant, can function as FMC_A10 or EVENTOUT. |+| 71 | PG1 | bidirectional | GPIO PG1, 5V-tolerant, can function as FMC_A11 or EVENTOUT. |+| 72 | PE7 | bidirectional | GPIO PE7, 5V-tolerant, can function as TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0, FMC_D4, or EVENTOUT. |+| 73 | PE8 | bidirectional | GPIO PE8, 5V-tolerant, can function as TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5, or EVENTOUT. |+| 74 | PE9 | bidirectional | GPIO PE9, 5V-tolerant, can function as TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, QUADSPI_BK2_IO2, FMC_D6, or EVENTOUT. |+| 75 | VSS | power_in | Ground (GND) pin. |+| 76 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 77 | PE10 | bidirectional | GPIO PE10, 5V-tolerant, can function as TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3, FMC_D7, or EVENTOUT. |+| 78 | PE11 | bidirectional | GPIO PE11, 5V-tolerant, can function as TIM1_CH2, SPI4_NSS, DFSDM1_CKIN4, SAI2_SD_B, FMC_D8, LCD_G3, or EVENTOUT. |+| 79 | PE12 | bidirectional | GPIO PE12, 5V-tolerant, can function as TIM1_CH3N, SPI4_SCK, DFSDM1_DATIN5, SAI2_SCK_B, FMC_D9, LCD_B4, or EVENTOUT. |+| 80 | PE13 | bidirectional | GPIO PE13, 5V-tolerant, can function as TIM1_CH3, SPI4_MISO, DFSDM1_CKIN5, SAI2_FS_B, FMC_D10, LCD_DE, or EVENTOUT. |+| 81 | PE14 | bidirectional | GPIO PE14, 5V-tolerant, can function as TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11, LCD_CLK, or EVENTOUT. |+| 82 | PE15 | bidirectional | GPIO PE15, 5V-tolerant, can function as TIM1_BKIN, FMC_D12, LCD_R7, or EVENTOUT. |+| 83 | PB10 | bidirectional | GPIO PB10, 5V-tolerant, can function as TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, QUADSPI_BK1_NCS, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, or EVENTOUT. |+| 84 | PB11 | bidirectional | GPIO PB11, 5V-tolerant, can function as TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/RMII_TX_EN, DSI_TE, LCD_G5, or EVENTOUT. |+| 85 | VCAP_1 | power_in | Voltage regulator bypass capacitor pin, requires external capacitor for internal regulator. |+| 86 | VSS | power_in | Ground (GND) pin. |+| 87 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 88 | PJ5 | bidirectional | GPIO PJ5, 5V-tolerant, can function as LCD_R6 or EVENTOUT. |+| 89 | PH6 | bidirectional | GPIO PH6, 5V-tolerant, can function as I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8, or EVENTOUT. |+| 90 | PH7 | bidirectional | GPIO PH7, 5V-tolerant, can function as I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9, or EVENTOUT. |+| 91 | PH8 | bidirectional | GPIO PH8, 5V-tolerant, can function as I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2, or EVENTOUT. |+| 92 | PH9 | bidirectional | GPIO PH9, 5V-tolerant, can function as I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3, or EVENTOUT. |+| 93 | PH10 | bidirectional | GPIO PH10, 5V-tolerant, can function as TIM5_CH1, I2C4_SMBA, FMC_D18, DCMI_D1, LCD_R4, or EVENTOUT. |+| 94 | PH11 | bidirectional | GPIO PH11, 5V-tolerant, can function as TIM5_CH2, I2C4_SCL, FMC_D19, DCMI_D2, LCD_R5, or EVENTOUT. |+| 95 | PH12 | bidirectional | GPIO PH12, 5V-tolerant, can function as TIM5_CH3, I2C4_SDA, FMC_D20, DCMI_D3, LCD_R6, or EVENTOUT. |+| 96 | PH13 | bidirectional | GPIO PH13, 5V-tolerant, can function as TIM8_CH1N, UART4_TX, CAN1_TX, FMC_D21, LCD_G2, or EVENTOUT. |+| 97 | PH14 | bidirectional | GPIO PH14, 5V-tolerant, can function as TIM8_CH2N, UART4_RX, CAN1_RX, FMC_D22, DCMI_D4, LCD_G3, or EVENTOUT. |+| 98 | PH15 | bidirectional | GPIO PH15, 5V-tolerant, can function as TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4, or EVENTOUT. |+| 99 | PI0 | bidirectional | GPIO PI0, 5V-tolerant, can function as TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5, or EVENTOUT. |+| 100 | PI1 | bidirectional | GPIO PI1, 5V-tolerant, can function as TIM8_BKIN2, SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6, or EVENTOUT. |+| 101 | PI2 | bidirectional | GPIO PI2, 5V-tolerant, can function as TIM8_CH4, SPI2_MISO, FMC_D26, DCMI_D9, LCD_G7, or EVENTOUT. |+| 102 | PI3 | bidirectional | GPIO PI3, 5V-tolerant, can function as TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10, or EVENTOUT. |+| 103 | PJ6 | bidirectional | GPIO PJ6, 5V-tolerant, can function as LCD_R7 or EVENTOUT. |+| 104 | PK0 | bidirectional | GPIO PK0, 5V-tolerant, can function as LCD_G5 or EVENTOUT. |+| 105 | PK1 | bidirectional | GPIO PK1, 5V-tolerant, can function as LCD_G6 or EVENTOUT. |+| 106 | PK2 | bidirectional | GPIO PK2, 5V-tolerant, can function as LCD_G7 or EVENTOUT. |+| 107 | PG2 | bidirectional | GPIO PG2, 5V-tolerant, can function as FMC_A12 or EVENTOUT. |+| 108 | PG3 | bidirectional | GPIO PG3, 5V-tolerant, can function as FMC_A13 or EVENTOUT. |+| 109 | PG4 | bidirectional | GPIO PG4, 5V-tolerant, can function as FMC_A14/FMC_BA0 or EVENTOUT. |+| 110 | PG5 | bidirectional | GPIO PG5, 5V-tolerant, can function as FMC_A15/FMC_BA1 or EVENTOUT. |+| 111 | PG6 | bidirectional | GPIO PG6, 5V-tolerant, can function as FMC_NE3, DCMI_D12, LCD_R7, or EVENTOUT. |+| 112 | PG7 | bidirectional | GPIO PG7, 5V-tolerant, can function as SAI1_MCLK_A, USART6_CK, FMC_INT, DCMI_D13, LCD_CLK, or EVENTOUT. |+| 113 | PG8 | bidirectional | GPIO PG8, 5V-tolerant, can function as SPI6_NSS, SPDIF_RX2, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, LCD_G7, or EVENTOUT. |+| 114 | VSS | power_in | Ground (GND) pin. |+| 115 | VDDUSB | power_in | USB power supply pin, can be connected to VDD or external USB power supply. |+| 116 | PC6 | bidirectional | GPIO PC6, 5V-tolerant, can function as TIM3_CH1, TIM8_CH1, I2S2_MCK, DFSDM1_CKIN3, USART6_TX, FMC_NWAIT, SDMMC2_D6, SDMMC1_D6, DCMI_D0, LCD_HSYNC, or EVENTOUT. |+| 117 | PC7 | bidirectional | GPIO PC7, 5V-tolerant, can function as TIM3_CH2, TIM8_CH2, I2S3_MCK, DFSDM1_DATIN3, USART6_RX, FMC_NE1, SDMMC2_D7, SDMMC1_D7, DCMI_D1, LCD_G6, or EVENTOUT. |+| 118 | PC8 | bidirectional | GPIO PC8, 5V-tolerant, can function as TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, FMC_NE2/NCE, SDMMC1_D0, DCMI_D2, or EVENTOUT. |+| 119 | PC9 | bidirectional | GPIO PC9, 5V-tolerant, can function as MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, LCD_G3, SDMMC1_D1, DCMI_D3, LCD_B2, or EVENTOUT. |+| 120 | PA8 | bidirectional | GPIO PA8, 5V-tolerant, can function as MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF, CAN3_RX, UART7_RX, LCD_B3, LCD_R6, or EVENTOUT. |+| 121 | PA9 | bidirectional | GPIO PA9, 5V-tolerant with VBUS sensing for OTG_FS, can function as TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0, LCD_R5, or EVENTOUT. |+| 122 | PA10 | bidirectional | GPIO PA10, 5V-tolerant, can function as TIM1_CH3, USART1_RX, LCD_B4, OTG_FS_ID, MDIOS_MDIO, DCMI_D1, LCD_B1, or EVENTOUT. |+| 123 | PA11 | bidirectional | GPIO PA11, 5V-tolerant, can function as TIM1_CH4, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, CAN1_RX, OTG_FS_DM, LCD_R4, or EVENTOUT. |+| 124 | PA12 | bidirectional | GPIO PA12, 5V-tolerant, can function as TIM1_ETR, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP, LCD_R5, or EVENTOUT. |+| 125 | PA13(JTMS-SWDIO) | bidirectional | GPIO PA13, 5V-tolerant JTAG/SWD pin, can function as JTMS-SWDIO or EVENTOUT for debugging interface. |+| 126 | VCAP_2 | power_in | Voltage regulator bypass capacitor pin, requires external capacitor for internal regulator. |+| 127 | VSS | power_in | Ground (GND) pin. |+| 128 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 129 | PH13 | bidirectional | GPIO PH13, 5V-tolerant, can function as TIM8_CH1N, UART4_TX, CAN1_TX, FMC_D21, LCD_G2, or EVENTOUT. |+| 130 | PH14 | bidirectional | GPIO PH14, 5V-tolerant, can function as TIM8_CH2N, UART4_RX, CAN1_RX, FMC_D22, DCMI_D4, LCD_G3, or EVENTOUT. |+| 131 | PH15 | bidirectional | GPIO PH15, 5V-tolerant, can function as TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4, or EVENTOUT. |+| 132 | PI0 | bidirectional | GPIO PI0, 5V-tolerant, can function as TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5, or EVENTOUT. |+| 133 | PI1 | bidirectional | GPIO PI1, 5V-tolerant, can function as TIM8_BKIN2, SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6, or EVENTOUT. |+| 134 | PI2 | bidirectional | GPIO PI2, 5V-tolerant, can function as TIM8_CH4, SPI2_MISO, FMC_D26, DCMI_D9, LCD_G7, or EVENTOUT. |+| 135 | PI3 | bidirectional | GPIO PI3, 5V-tolerant, can function as TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10, or EVENTOUT. |+| 136 | VSS | power_in | Ground (GND) pin. |+| 137 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 138 | PA14(JTCK-SWCLK) | bidirectional | GPIO PA14, 5V-tolerant JTAG/SWD clock pin, can function as JTCK-SWCLK or EVENTOUT for debugging interface. |+| 139 | PA15(JTDI) | bidirectional | GPIO PA15, 5V-tolerant JTAG pin, can function as JTDI, TIM2_CH1/ETR, HDMI_CEC, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, SPI6_NSS, UART4_RTS, CAN3_TX, UART7_TX, or EVENTOUT. |+| 140 | PC10 | bidirectional | GPIO PC10, 5V-tolerant, can function as DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2, DCMI_D8, LCD_R2, or EVENTOUT. |+| 141 | PC11 | bidirectional | GPIO PC11, 5V-tolerant, can function as DFSDM1_DATIN5, SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3, DCMI_D4, or EVENTOUT. |+| 142 | PC12 | bidirectional | GPIO PC12, 5V-tolerant, can function as TRACED3, SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9, or EVENTOUT. |+| 143 | PD0 | bidirectional | GPIO PD0, 5V-tolerant, can function as DFSDM1_CKIN6, DFSDM1_DATIN7, UART4_RX, CAN1_RX, FMC_D2, or EVENTOUT. |+| 144 | PD1 | bidirectional | GPIO PD1, 5V-tolerant, can function as DFSDM1_DATIN6, DFSDM1_CKIN7, UART4_TX, CAN1_TX, FMC_D3, or EVENTOUT. |+| 145 | PD2 | bidirectional | GPIO PD2, 5V-tolerant, can function as TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD, DCMI_D11, or EVENTOUT. |+| 146 | PD3 | bidirectional | GPIO PD3, 5V-tolerant, can function as DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, DFSDM1_DATIN0, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, or EVENTOUT. |+| 147 | PD4 | bidirectional | GPIO PD4, 5V-tolerant, can function as DFSDM1_CKIN0, USART2_RTS, FMC_NOE, or EVENTOUT. |+| 148 | PD5 | bidirectional | GPIO PD5, 5V-tolerant, can function as USART2_TX, FMC_NWE, or EVENTOUT. |+| 149 | VSS | power_in | Ground (GND) pin. |+| 150 | VDDSDMMC | power_in | Dedicated power supply for SD/MMC interfaces. |+| 151 | PD6 | bidirectional | GPIO PD6, 5V-tolerant, can function as DFSDM1_CKIN4, SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, DFSDM1_DATIN1, SDMMC2_CK, FMC_NWAIT, DCMI_D10, LCD_B2, or EVENTOUT. |+| 152 | PD7 | bidirectional | GPIO PD7, 5V-tolerant, can function as DFSDM1_DATIN4, SPI1_MOSI/I2S1_SD, DFSDM1_CKIN1, USART2_CK, SPDIF_RX0, SDMMC2_CMD, FMC_NE1, or EVENTOUT. |+| 153 | PG9 | bidirectional | GPIO PG9, 5V-tolerant, can function as SPI1_MISO, SPDIF_RX3, USART6_RX, QUADSPI_BK2_IO2, SAI2_FS_B, SDMMC2_D0, FMC_NE2/NCE, DCMI_VSYNC, or EVENTOUT. |+| 154 | PG10 | bidirectional | GPIO PG10, 5V-tolerant, can function as SPI1_NSS/I2S1_WS, LCD_G3, SAI2_SD_B, SDMMC2_D1, FMC_NE3, DCMI_D2, LCD_B2, or EVENTOUT. |+| 155 | PG11 | bidirectional | GPIO PG11, 5V-tolerant, can function as SPI1_SCK/I2S1_CK, SPDIF_RX0, SDMMC2_D2, ETH_MII_TX_EN/RMII_TX_EN, DCMI_D3, LCD_B3, or EVENTOUT. |+| 156 | PG12 | bidirectional | GPIO PG12, 5V-tolerant, can function as LPTIM1_IN1, SPI6_MISO, SPDIF_RX1, USART6_RTS, LCD_B4, SDMMC2_D3, FMC_NE4, LCD_B1, or EVENTOUT. |+| 157 | PG13 | bidirectional | GPIO PG13, 5V-tolerant, can function as TRACED0, LPTIM1_OUT, SPI6_SCK, USART6_CTS, ETH_MII_TXD0/RMII_TXD0, FMC_A24, LCD_R0, or EVENTOUT. |+| 158 | PG14 | bidirectional | GPIO PG14, 5V-tolerant, can function as TRACED1, LPTIM1_ETR, SPI6_MOSI, USART6_TX, QUADSPI_BK2_IO3, ETH_MII_TXD1/RMII_TXD1, FMC_A25, LCD_B0, or EVENTOUT. |+| 159 | VSS | power_in | Ground (GND) pin. |+| 160 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 161 | PG15 | bidirectional | GPIO PG15, 5V-tolerant, can function as USART6_CTS, FMC_SDNCAS, DCMI_D13, or EVENTOUT. |+| 162 | PB3(JTDO/TRACESWO) | bidirectional | GPIO PB3, 5V-tolerant JTAG pin, can function as JTDO/TRACESWO, TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SPI6_SCK, SDMMC2_D2, CAN3_RX, UART7_RX, or EVENTOUT. |+| 163 | PB4(NJTRST) | bidirectional | GPIO PB4, 5V-tolerant JTAG pin, can function as NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, SPI2_NSS/I2S2_WS, SPI6_MISO, SDMMC2_D3, CAN3_TX, UART7_TX, or EVENTOUT. |+| 164 | PB5 | bidirectional | GPIO PB5, 5V-tolerant, can function as UART5_RX, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, SPI6_MOSI, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, LCD_G7, or EVENTOUT. |+| 165 | PB6 | bidirectional | GPIO PB6, 5V-tolerant, can function as UART5_TX, TIM4_CH1, HDMI_CEC, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, I2C4_SCL, FMC_SDNE1, DCMI_D5, or EVENTOUT. |+| 166 | PB7 | bidirectional | GPIO PB7, 5V-tolerant, can function as TIM4_CH2, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, I2C4_SDA, FMC_NL, DCMI_VSYNC, or EVENTOUT. |+| 167 | PE0 | bidirectional | GPIO PE0, 5V-tolerant, can function as TIM4_ETR, LPTIM1_ETR, UART8_RX, SAI2_MCLK_A, FMC_NBL0, DCMI_D2, or EVENTOUT. |+| 168 | PE1 | bidirectional | GPIO PE1, 5V-tolerant, can function as LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3, or EVENTOUT. |+| 169 | VSS | power_in | Ground (GND) pin. |+| 170 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 171 | PI4 | bidirectional | GPIO PI4, 5V-tolerant, can function as TIM8_BKIN, SAI2_MCLK_A, FMC_NBL2, DCMI_D5, LCD_B4, or EVENTOUT. |+| 172 | PI5 | bidirectional | GPIO PI5, 5V-tolerant, can function as TIM8_CH1, SAI2_SCK_A, FMC_NBL3, DCMI_VSYNC, LCD_B5, or EVENTOUT. |+| 173 | PI6 | bidirectional | GPIO PI6, 5V-tolerant, can function as TIM8_CH2, SAI2_SD_A, FMC_D28, DCMI_D6, LCD_B6, or EVENTOUT. |+| 174 | PI7 | bidirectional | GPIO PI7, 5V-tolerant, can function as TIM8_CH3, SAI2_FS_A, FMC_D29, DCMI_D7, LCD_B7, or EVENTOUT. |+| 175 | PI8 | bidirectional | GPIO PI8, 5V-tolerant with limited output drive via power switch, can function as EVENTOUT or RTC_TAMP2. |+| 176 | PI9 | bidirectional | GPIO PI9, 5V-tolerant, can function as UART4_RX, CAN1_RX, FMC_D30, LCD_VSYNC, or EVENTOUT. |+| 177 | PI10 | bidirectional | GPIO PI10, 5V-tolerant, can function as ETH_MII_RX_ER, FMC_D31, LCD_HSYNC, or EVENTOUT. |+| 178 | PI11 | bidirectional | GPIO PI11, 5V-tolerant, wakeup capable, can function as LCD_G6, OTG_HS_ULPI_DIR, or EVENTOUT. |+| 179 | PI12 | bidirectional | GPIO PI12, 5V-tolerant, can function as LCD_HSYNC or EVENTOUT. |+| 180 | PI13 | bidirectional | GPIO PI13, 5V-tolerant, can function as LCD_VSYNC or EVENTOUT. |+| 181 | PI14 | bidirectional | GPIO PI14, 5V-tolerant, can function as LCD_CLK or EVENTOUT. |+| 182 | PI15 | bidirectional | GPIO PI15, 5V-tolerant, can function as LCD_G2, LCD_R0, or EVENTOUT. |+| 183 | PJ0 | bidirectional | GPIO PJ0, 5V-tolerant, can function as LCD_R7, LCD_R1, or EVENTOUT. |+| 184 | PJ1 | bidirectional | GPIO PJ1, 5V-tolerant, can function as LCD_R2 or EVENTOUT. |+| 185 | PJ2 | bidirectional | GPIO PJ2, 5V-tolerant, can function as DSI_TE, LCD_R3, or EVENTOUT. |+| 186 | PJ3 | bidirectional | GPIO PJ3, 5V-tolerant, can function as LCD_R4 or EVENTOUT. |+| 187 | PJ4 | bidirectional | GPIO PJ4, 5V-tolerant, can function as LCD_R5 or EVENTOUT. |+| 188 | PJ5 | bidirectional | GPIO PJ5, 5V-tolerant, can function as LCD_R6 or EVENTOUT. |+| 189 | PJ6 | bidirectional | GPIO PJ6, 5V-tolerant, can function as LCD_R7 or EVENTOUT. |+| 190 | PJ7 | bidirectional | GPIO PJ7, 5V-tolerant, can function as LCD_G0 or EVENTOUT. |+| 191 | PJ8 | bidirectional | GPIO PJ8, 5V-tolerant, can function as LCD_G1 or EVENTOUT. |+| 192 | PJ9 | bidirectional | GPIO PJ9, 5V-tolerant, can function as LCD_G2 or EVENTOUT. |+| 193 | PJ10 | bidirectional | GPIO PJ10, 5V-tolerant, can function as LCD_G3 or EVENTOUT. |+| 194 | PJ11 | bidirectional | GPIO PJ11, 5V-tolerant, can function as LCD_G4 or EVENTOUT. |+| 195 | VSS | power_in | Ground (GND) pin. |+| 196 | VDD | power_in | Main power supply pin, 1.7V to 3.6V. |+| 197 | PK3 | bidirectional | GPIO PK3, 5V-tolerant, can function as LCD_B4 or EVENTOUT. |+| 198 | PK4 | bidirectional | GPIO PK4, 5V-tolerant, can function as LCD_B5 or EVENTOUT. |+| 199 | PK5 | bidirectional | GPIO PK5, 5V-tolerant, can function as LCD_B6 or EVENTOUT. |+| 200 | PK6 | bidirectional | GPIO PK6, 5V-tolerant, can function as LCD_B7 or EVENTOUT. |+| 201 | PK7 | bidirectional | GPIO PK7, 5V-tolerant, can function as LCD_DE or EVENTOUT. |+| 202 | PB12 | bidirectional | GPIO PB12, 5V-tolerant, can function as TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, DFSDM1_DATIN1, USART3_CK, UART5_RX, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/RMII_TXD0, OTG_HS_ID, or EVENTOUT. |+| 203 | PB13 | bidirectional | GPIO PB13, 5V-tolerant with VBUS sensing for OTG_HS, can function as TIM1_CH1N, SPI2_SCK/I2S2_CK, DFSDM1_CKIN1, USART3_CTS, UART5_TX, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/RMII_TXD1, or EVENTOUT. |+| 204 | PB14 | bidirectional | GPIO PB14, 5V-tolerant, can function as TIM1_CH2N, TIM8_CH2N, USART1_TX, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS, UART4_RTS, TIM12_CH1, SDMMC2_D0, OTG_HS_DM, or EVENTOUT. |+| 205 | PB15 | bidirectional | GPIO PB15, 5V-tolerant, can function as RTC_REFIN, TIM1_CH3N, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SD, DFSDM1_CKIN2, UART4_CTS, TIM12_CH2, SDMMC2_D1, OTG_HS_DP, or EVENTOUT. |+| 206 | PD8 | bidirectional | GPIO PD8, 5V-tolerant, can function as DFSDM1_CKIN3, USART3_TX, SPDIF_RX1, FMC_D13, or EVENTOUT. |+| 207 | PD9 | bidirectional | GPIO PD9, 5V-tolerant, can function as DFSDM1_DATIN3, USART3_RX, FMC_D14, or EVENTOUT. |+| 208 | PD10 | bidirectional | GPIO PD10, 5V-tolerant, can function as DFSDM1_CKOUT, USART3_CK, FMC_D15, LCD_B3, or EVENTOUT. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-208(28x28) |+| Category | Embedded Processors & Controllers |+| Pins | 208 |++## CAD (KiCad official)++- Symbol: `STM32F767BIT6`+- Footprint: `Package_QFP:LQFP-208_28x28mm_P0.5mm`+- 3D model: LQFP-208(28x28) (KiCad packages3D, STEP)+- 3D model files: `stm32f767bit6-etched.step` / `stm32f767bit6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f767bit6.step` / `stm32f767bit6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588858513787662336) (256 pp, sha256 `3d2a3b76d5ba156e`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm32f767bit6-datasheet.pdf)
page.jsonadded+1328@@ -0,0 +1,1328 @@+{+ "slug": "stm32f767bit6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-208(28x28). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm32f767bit6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm32f767bit6.kicad_sym",+ "stm32f767bit6.kicad_mod",+ "stm32f767bit6.glb",+ "stm32f767bit6.step",+ "stm32f767bit6.lbr",+ "docs/hero.png",+ "docs/stm32f767bit6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM32F767BIT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-208(28x28)",+ "pin_count": 208,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588858513787662336",+ "parts": {+ "symbol": "stm32f767bit6.kicad_sym",+ "footprint": "stm32f767bit6.kicad_mod",+ "model_3d": "stm32f767bit6-etched.glb",+ "model_3d_plain": "stm32f767bit6.glb",+ "model_3d_step": "stm32f767bit6-etched.step",+ "model_3d_step_plain": "stm32f767bit6.step",+ "lbr": "stm32f767bit6.lbr"+ },+ "distributor_links": {+ "lcsc": "C129276"+ },+ "pins": [+ {+ "number": "1",+ "name": "PE2",+ "type": "bidirectional",+ "description": "GPIO PE2, 5V-tolerant, can function as TRACECLK, SPI4_SCK, SAI1_MCLK_A, QUADSPI_BK1_IO2, ETH_MII_TXD3, FMC_A23, or EVENTOUT."+ },+ {+ "number": "2",+ "name": "PE3",+ "type": "bidirectional",+ "description": "GPIO PE3, 5V-tolerant, can function as TRACED0, SAI1_SD_B, FMC_A19, or EVENTOUT."+ },+ {+ "number": "3",+ "name": "PE4",+ "type": "bidirectional",+ "description": "GPIO PE4, 5V-tolerant, can function as TRACED1, SPI4_NSS, SAI1_FS_A, DFSDM1_DATIN3, FMC_A20, DCMI_D4, LCD_B0, or EVENTOUT."+ },+ {+ "number": "4",+ "name": "PE5",+ "type": "bidirectional",+ "description": "GPIO PE5, 5V-tolerant, can function as TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, DFSDM1_CKIN3, FMC_A21, DCMI_D6, LCD_G0, or EVENTOUT."+ },+ {+ "number": "5",+ "name": "PE6",+ "type": "bidirectional",+ "description": "GPIO PE6, 5V-tolerant, can function as TRACED3, TIM1_BKIN2, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCLK_B, FMC_A22, DCMI_D7, LCD_G1, or EVENTOUT."+ },+ {+ "number": "6",+ "name": "VBAT",+ "type": "power_in",+ "description": "Backup battery supply voltage pin, 1.7V to 3.6V."+ },+ {+ "number": "7",+ "name": "PI8",+ "type": "bidirectional",+ "description": "GPIO PI8, 5V-tolerant, can function as EVENTOUT, RTC_TAMP2, RTC_TS, or WKUP5."+ },+ {+ "number": "8",+ "name": "PC13",+ "type": "bidirectional",+ "description": "GPIO PC13, 5V-tolerant with limited output drive via power switch (max 2 MHz, 30 pF load), can function as EVENTOUT, RTC_TAMP1, RTC_TS, RTC_OUT, or WKUP4."+ },+ {+ "number": "9",+ "name": "PC14-OSC32_IN",+ "type": "bidirectional",+ "description": "GPIO PC14, 5V-tolerant except in analog/oscillator mode, can function as EVENTOUT or OSC32_IN for 32 kHz oscillator."+ },+ {+ "number": "10",+ "name": "PC15-OSC32_OUT",+ "type": "bidirectional",+ "description": "GPIO PC15, 5V-tolerant except in analog/oscillator mode, can function as EVENTOUT or OSC32_OUT for 32 kHz oscillator."+ },+ {+ "number": "11",+ "name": "PI9",+ "type": "bidirectional",+ "description": "GPIO PI9, 5V-tolerant, can function as UART4_RX, CAN1_RX, FMC_D30, LCD_VSYNC, or EVENTOUT."+ },+ {+ "number": "12",+ "name": "PI10",+ "type": "bidirectional",+ "description": "GPIO PI10, 5V-tolerant, can function as ETH_MII_RX_ER, FMC_D31, LCD_HSYNC, or EVENTOUT."+ },+ {+ "number": "13",+ "name": "PI11",+ "type": "bidirectional",+ "description": "GPIO PI11, 5V-tolerant, wakeup capable, can function as LCD_G6, OTG_HS_ULPI_DIR, or EVENTOUT."+ },+ {+ "number": "14",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "15",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "16",+ "name": "PF0",+ "type": "bidirectional",+ "description": "GPIO PF0, 5V-tolerant, can function as I2C2_SDA, FMC_A0, or EVENTOUT."+ },+ {+ "number": "17",+ "name": "PF1",+ "type": "bidirectional",+ "description": "GPIO PF1, 5V-tolerant, can function as I2C2_SCL, FMC_A1, or EVENTOUT."+ },+ {+ "number": "18",+ "name": "PF2",+ "type": "bidirectional",+ "description": "GPIO PF2, 5V-tolerant, can function as I2C2_SMBA, FMC_A2, or EVENTOUT."+ },+ {+ "number": "19",+ "name": "PI12",+ "type": "bidirectional",+ "description": "GPIO PI12, 5V-tolerant, can function as LCD_HSYNC or EVENTOUT."+ },+ {+ "number": "20",+ "name": "PI13",+ "type": "bidirectional",+ "description": "GPIO PI13, 5V-tolerant, can function as LCD_VSYNC or EVENTOUT."+ },+ {+ "number": "21",+ "name": "PI14",+ "type": "bidirectional",+ "description": "GPIO PI14, 5V-tolerant, can function as LCD_CLK or EVENTOUT."+ },+ {+ "number": "22",+ "name": "PF3",+ "type": "bidirectional",+ "description": "GPIO PF3, 5V-tolerant, can function as FMC_A3 or EVENTOUT, with ADC3_IN9 analog input."+ },+ {+ "number": "23",+ "name": "PF4",+ "type": "bidirectional",+ "description": "GPIO PF4, 5V-tolerant, can function as FMC_A4 or EVENTOUT, with ADC3_IN14 analog input."+ },+ {+ "number": "24",+ "name": "PF5",+ "type": "bidirectional",+ "description": "GPIO PF5, 5V-tolerant, can function as FMC_A5 or EVENTOUT, with ADC3_IN15 analog input."+ },+ {+ "number": "25",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "26",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "27",+ "name": "PF6",+ "type": "bidirectional",+ "description": "GPIO PF6, 5V-tolerant, can function as TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_RX, QUADSPI_BK1_IO3, or EVENTOUT, with ADC3_IN4 analog input."+ },+ {+ "number": "28",+ "name": "PF7",+ "type": "bidirectional",+ "description": "GPIO PF7, 5V-tolerant, can function as TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_TX, QUADSPI_BK1_IO2, or EVENTOUT, with ADC3_IN5 analog input."+ },+ {+ "number": "29",+ "name": "PF8",+ "type": "bidirectional",+ "description": "GPIO PF8, 5V-tolerant, can function as SPI5_MISO, SAI1_SCK_B, UART7_RTS, TIM13_CH1, QUADSPI_BK1_IO0, or EVENTOUT, with ADC3_IN6 analog input."+ },+ {+ "number": "30",+ "name": "PF9",+ "type": "bidirectional",+ "description": "GPIO PF9, 5V-tolerant, can function as SPI5_MOSI, SAI1_FS_B, UART7_CTS, TIM14_CH1, QUADSPI_BK1_IO1, or EVENTOUT, with ADC3_IN7 analog input."+ },+ {+ "number": "31",+ "name": "PF10",+ "type": "bidirectional",+ "description": "GPIO PF10, 5V-tolerant, can function as QUADSPI_CLK, DCMI_D11, LCD_DE, or EVENTOUT, with ADC3_IN8 analog input."+ },+ {+ "number": "32",+ "name": "PH0-OSC_IN",+ "type": "bidirectional",+ "description": "GPIO PH0, 5V-tolerant except in oscillator mode, can function as EVENTOUT or OSC_IN for main crystal oscillator (4-26 MHz)."+ },+ {+ "number": "33",+ "name": "PH1-OSC_OUT",+ "type": "bidirectional",+ "description": "GPIO PH1, 5V-tolerant except in oscillator mode, can function as EVENTOUT or OSC_OUT for main crystal oscillator."+ },+ {+ "number": "34",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Reset input pin with internal weak pull-up, active low, supports external reset source and programming."+ },+ {+ "number": "35",+ "name": "PC0",+ "type": "bidirectional",+ "description": "GPIO PC0, 5V-tolerant, can function as DFSDM1_CKIN0, DFSDM1_DATIN4, SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, LCD_R5, or EVENTOUT, with ADC1/2/3_IN10 analog inputs."+ },+ {+ "number": "36",+ "name": "PC1",+ "type": "bidirectional",+ "description": "GPIO PC1, 5V-tolerant, can function as TRACED0, DFSDM1_DATIN0, SPI2_MOSI/I2S2_SD, SAI1_SD_A, DFSDM1_CKIN4, ETH_MDC, MDIOS_MDC, or EVENTOUT, with ADC1/2/3_IN11 analog inputs and RTC_TAMP3/WKUP3."+ },+ {+ "number": "37",+ "name": "PC2",+ "type": "bidirectional",+ "description": "GPIO PC2, 5V-tolerant with limited output drive via power switch, can function as DFSDM1_CKIN1, SPI2_MISO, DFSDM1_CKOUT, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, or EVENTOUT, with ADC1/2/3_IN12 analog inputs."+ },+ {+ "number": "38",+ "name": "PC3",+ "type": "bidirectional",+ "description": "GPIO PC3, 5V-tolerant with limited output drive via power switch, can function as DFSDM1_DATIN1, SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, or EVENTOUT, with ADC1/2/3_IN13 analog inputs."+ },+ {+ "number": "39",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "40",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "41",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground pin for ADC and DAC."+ },+ {+ "number": "42",+ "name": "VREF+",+ "type": "power_in",+ "description": "ADC positive reference voltage pin, 1.8V to VDD with recommended decoupling capacitor."+ },+ {+ "number": "43",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply for ADC/DAC, 1.7V to 3.6V with dedicated decoupling capacitor."+ },+ {+ "number": "44",+ "name": "PA0-WKUP",+ "type": "bidirectional",+ "description": "GPIO PA0, 5V-tolerant, wakeup capable (WKUP1), can function as TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B, ETH_MII_CRS, or EVENTOUT, with ADC1/2/3_IN0 analog inputs."+ },+ {+ "number": "45",+ "name": "PA1",+ "type": "bidirectional",+ "description": "GPIO PA1, 5V-tolerant, can function as TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCLK_B, ETH_MII_RX_CLK/RMII_REF_CLK, LCD_R2, or EVENTOUT, with ADC1/2/3_IN1 analog inputs."+ },+ {+ "number": "46",+ "name": "PA2",+ "type": "bidirectional",+ "description": "GPIO PA2, 5V-tolerant, wakeup capable (WKUP2), can function as TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B, ETH_MDIO, MDIOS_MDIO, LCD_R1, or EVENTOUT, with ADC1/2/3_IN2 analog inputs."+ },+ {+ "number": "47",+ "name": "PH2",+ "type": "bidirectional",+ "description": "GPIO PH2, 5V-tolerant, can function as LPTIM1_IN2, QUADSPI_BK2_IO0, SAI2_SCK_B, ETH_MII_CRS, FMC_SDCKE0, LCD_R0, or EVENTOUT."+ },+ {+ "number": "48",+ "name": "PH3",+ "type": "bidirectional",+ "description": "GPIO PH3, 5V-tolerant, can function as QUADSPI_BK2_IO1, SAI2_MCLK_B, ETH_MII_COL, FMC_SDNE0, LCD_R1, or EVENTOUT."+ },+ {+ "number": "49",+ "name": "PA3",+ "type": "bidirectional",+ "description": "GPIO PA3, 5V-tolerant, can function as TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, LCD_B2, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, or EVENTOUT, with ADC1/2/3_IN3 analog inputs."+ },+ {+ "number": "50",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "51",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "52",+ "name": "PA4",+ "type": "bidirectional",+ "description": "GPIO PA4, 3.3V-tolerant ADC input, can function as SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, SPI6_NSS, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, or EVENTOUT, with ADC1/2_IN4 and DAC_OUT1."+ },+ {+ "number": "53",+ "name": "PA5",+ "type": "bidirectional",+ "description": "GPIO PA5, 3.3V-tolerant ADC input, can function as TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, SPI6_SCK, OTG_HS_ULPI_CK, LCD_R4, or EVENTOUT, with ADC1/2_IN5 and DAC_OUT2."+ },+ {+ "number": "54",+ "name": "PA6",+ "type": "bidirectional",+ "description": "GPIO PA6, 5V-tolerant, can function as TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, SPI6_MISO, TIM13_CH1, MDIOS_MDC, DCMI_PIXCLK, LCD_G2, or EVENTOUT, with ADC1/2_IN6 analog inputs."+ },+ {+ "number": "55",+ "name": "PA7",+ "type": "bidirectional",+ "description": "GPIO PA7, 5V-tolerant, can function as TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, SPI6_MOSI, TIM14_CH1, ETH_MII_RX_DV/RMII_CRS_DV, FMC_SDNWE, or EVENTOUT, with ADC1/2_IN7 analog inputs."+ },+ {+ "number": "56",+ "name": "PC4",+ "type": "bidirectional",+ "description": "GPIO PC4, 5V-tolerant, can function as DFSDM1_CKIN2, I2S1_MCK, SPDIF_RX2, ETH_MII_RXD0/RMII_RXD0, FMC_SDNE0, or EVENTOUT, with ADC1/2_IN14 analog inputs."+ },+ {+ "number": "57",+ "name": "PC5",+ "type": "bidirectional",+ "description": "GPIO PC5, 5V-tolerant, can function as DFSDM1_DATIN2, SPDIF_RX3, ETH_MII_RXD1/RMII_RXD1, FMC_SDCKE0, or EVENTOUT, with ADC1/2_IN15 analog inputs."+ },+ {+ "number": "58",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "59",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "60",+ "name": "PB0",+ "type": "bidirectional",+ "description": "GPIO PB0, 5V-tolerant, can function as TIM1_CH2N, TIM3_CH3, TIM8_CH2N, DFSDM1_CKOUT, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, LCD_G1, or EVENTOUT, with ADC1/2_IN8 analog inputs."+ },+ {+ "number": "61",+ "name": "PB1",+ "type": "bidirectional",+ "description": "GPIO PB1, 5V-tolerant, can function as TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, LCD_G0, or EVENTOUT, with ADC1/2_IN9 analog inputs."+ },+ {+ "number": "62",+ "name": "PB2",+ "type": "bidirectional",+ "description": "GPIO PB2, 5V-tolerant, can function as SAI1_SD_A, SPI3_MOSI/I2S3_SD, QUADSPI_CLK, DFSDM1_CKIN1, or EVENTOUT."+ },+ {+ "number": "63",+ "name": "PF11",+ "type": "bidirectional",+ "description": "GPIO PF11, 5V-tolerant, can function as SPI5_MOSI, SAI2_SD_B, FMC_SDNRAS, DCMI_D12, or EVENTOUT."+ },+ {+ "number": "64",+ "name": "PF12",+ "type": "bidirectional",+ "description": "GPIO PF12, 5V-tolerant, can function as FMC_A6 or EVENTOUT."+ },+ {+ "number": "65",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "66",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "67",+ "name": "PF13",+ "type": "bidirectional",+ "description": "GPIO PF13, 5V-tolerant, can function as I2C4_SMBA, DFSDM1_DATIN6, FMC_A7, or EVENTOUT."+ },+ {+ "number": "68",+ "name": "PF14",+ "type": "bidirectional",+ "description": "GPIO PF14, 5V-tolerant, can function as I2C4_SCL, DFSDM1_CKIN6, FMC_A8, or EVENTOUT."+ },+ {+ "number": "69",+ "name": "PF15",+ "type": "bidirectional",+ "description": "GPIO PF15, 5V-tolerant, can function as I2C4_SDA, FMC_A9, or EVENTOUT."+ },+ {+ "number": "70",+ "name": "PG0",+ "type": "bidirectional",+ "description": "GPIO PG0, 5V-tolerant, can function as FMC_A10 or EVENTOUT."+ },+ {+ "number": "71",+ "name": "PG1",+ "type": "bidirectional",+ "description": "GPIO PG1, 5V-tolerant, can function as FMC_A11 or EVENTOUT."+ },+ {+ "number": "72",+ "name": "PE7",+ "type": "bidirectional",+ "description": "GPIO PE7, 5V-tolerant, can function as TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0, FMC_D4, or EVENTOUT."+ },+ {+ "number": "73",+ "name": "PE8",+ "type": "bidirectional",+ "description": "GPIO PE8, 5V-tolerant, can function as TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5, or EVENTOUT."+ },+ {+ "number": "74",+ "name": "PE9",+ "type": "bidirectional",+ "description": "GPIO PE9, 5V-tolerant, can function as TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, QUADSPI_BK2_IO2, FMC_D6, or EVENTOUT."+ },+ {+ "number": "75",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "76",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "77",+ "name": "PE10",+ "type": "bidirectional",+ "description": "GPIO PE10, 5V-tolerant, can function as TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3, FMC_D7, or EVENTOUT."+ },+ {+ "number": "78",+ "name": "PE11",+ "type": "bidirectional",+ "description": "GPIO PE11, 5V-tolerant, can function as TIM1_CH2, SPI4_NSS, DFSDM1_CKIN4, SAI2_SD_B, FMC_D8, LCD_G3, or EVENTOUT."+ },+ {+ "number": "79",+ "name": "PE12",+ "type": "bidirectional",+ "description": "GPIO PE12, 5V-tolerant, can function as TIM1_CH3N, SPI4_SCK, DFSDM1_DATIN5, SAI2_SCK_B, FMC_D9, LCD_B4, or EVENTOUT."+ },+ {+ "number": "80",+ "name": "PE13",+ "type": "bidirectional",+ "description": "GPIO PE13, 5V-tolerant, can function as TIM1_CH3, SPI4_MISO, DFSDM1_CKIN5, SAI2_FS_B, FMC_D10, LCD_DE, or EVENTOUT."+ },+ {+ "number": "81",+ "name": "PE14",+ "type": "bidirectional",+ "description": "GPIO PE14, 5V-tolerant, can function as TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11, LCD_CLK, or EVENTOUT."+ },+ {+ "number": "82",+ "name": "PE15",+ "type": "bidirectional",+ "description": "GPIO PE15, 5V-tolerant, can function as TIM1_BKIN, FMC_D12, LCD_R7, or EVENTOUT."+ },+ {+ "number": "83",+ "name": "PB10",+ "type": "bidirectional",+ "description": "GPIO PB10, 5V-tolerant, can function as TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, QUADSPI_BK1_NCS, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, or EVENTOUT."+ },+ {+ "number": "84",+ "name": "PB11",+ "type": "bidirectional",+ "description": "GPIO PB11, 5V-tolerant, can function as TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/RMII_TX_EN, DSI_TE, LCD_G5, or EVENTOUT."+ },+ {+ "number": "85",+ "name": "VCAP_1",+ "type": "power_in",+ "description": "Voltage regulator bypass capacitor pin, requires external capacitor for internal regulator."+ },+ {+ "number": "86",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "87",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "88",+ "name": "PJ5",+ "type": "bidirectional",+ "description": "GPIO PJ5, 5V-tolerant, can function as LCD_R6 or EVENTOUT."+ },+ {+ "number": "89",+ "name": "PH6",+ "type": "bidirectional",+ "description": "GPIO PH6, 5V-tolerant, can function as I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8, or EVENTOUT."+ },+ {+ "number": "90",+ "name": "PH7",+ "type": "bidirectional",+ "description": "GPIO PH7, 5V-tolerant, can function as I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9, or EVENTOUT."+ },+ {+ "number": "91",+ "name": "PH8",+ "type": "bidirectional",+ "description": "GPIO PH8, 5V-tolerant, can function as I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2, or EVENTOUT."+ },+ {+ "number": "92",+ "name": "PH9",+ "type": "bidirectional",+ "description": "GPIO PH9, 5V-tolerant, can function as I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3, or EVENTOUT."+ },+ {+ "number": "93",+ "name": "PH10",+ "type": "bidirectional",+ "description": "GPIO PH10, 5V-tolerant, can function as TIM5_CH1, I2C4_SMBA, FMC_D18, DCMI_D1, LCD_R4, or EVENTOUT."+ },+ {+ "number": "94",+ "name": "PH11",+ "type": "bidirectional",+ "description": "GPIO PH11, 5V-tolerant, can function as TIM5_CH2, I2C4_SCL, FMC_D19, DCMI_D2, LCD_R5, or EVENTOUT."+ },+ {+ "number": "95",+ "name": "PH12",+ "type": "bidirectional",+ "description": "GPIO PH12, 5V-tolerant, can function as TIM5_CH3, I2C4_SDA, FMC_D20, DCMI_D3, LCD_R6, or EVENTOUT."+ },+ {+ "number": "96",+ "name": "PH13",+ "type": "bidirectional",+ "description": "GPIO PH13, 5V-tolerant, can function as TIM8_CH1N, UART4_TX, CAN1_TX, FMC_D21, LCD_G2, or EVENTOUT."+ },+ {+ "number": "97",+ "name": "PH14",+ "type": "bidirectional",+ "description": "GPIO PH14, 5V-tolerant, can function as TIM8_CH2N, UART4_RX, CAN1_RX, FMC_D22, DCMI_D4, LCD_G3, or EVENTOUT."+ },+ {+ "number": "98",+ "name": "PH15",+ "type": "bidirectional",+ "description": "GPIO PH15, 5V-tolerant, can function as TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4, or EVENTOUT."+ },+ {+ "number": "99",+ "name": "PI0",+ "type": "bidirectional",+ "description": "GPIO PI0, 5V-tolerant, can function as TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5, or EVENTOUT."+ },+ {+ "number": "100",+ "name": "PI1",+ "type": "bidirectional",+ "description": "GPIO PI1, 5V-tolerant, can function as TIM8_BKIN2, SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6, or EVENTOUT."+ },+ {+ "number": "101",+ "name": "PI2",+ "type": "bidirectional",+ "description": "GPIO PI2, 5V-tolerant, can function as TIM8_CH4, SPI2_MISO, FMC_D26, DCMI_D9, LCD_G7, or EVENTOUT."+ },+ {+ "number": "102",+ "name": "PI3",+ "type": "bidirectional",+ "description": "GPIO PI3, 5V-tolerant, can function as TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10, or EVENTOUT."+ },+ {+ "number": "103",+ "name": "PJ6",+ "type": "bidirectional",+ "description": "GPIO PJ6, 5V-tolerant, can function as LCD_R7 or EVENTOUT."+ },+ {+ "number": "104",+ "name": "PK0",+ "type": "bidirectional",+ "description": "GPIO PK0, 5V-tolerant, can function as LCD_G5 or EVENTOUT."+ },+ {+ "number": "105",+ "name": "PK1",+ "type": "bidirectional",+ "description": "GPIO PK1, 5V-tolerant, can function as LCD_G6 or EVENTOUT."+ },+ {+ "number": "106",+ "name": "PK2",+ "type": "bidirectional",+ "description": "GPIO PK2, 5V-tolerant, can function as LCD_G7 or EVENTOUT."+ },+ {+ "number": "107",+ "name": "PG2",+ "type": "bidirectional",+ "description": "GPIO PG2, 5V-tolerant, can function as FMC_A12 or EVENTOUT."+ },+ {+ "number": "108",+ "name": "PG3",+ "type": "bidirectional",+ "description": "GPIO PG3, 5V-tolerant, can function as FMC_A13 or EVENTOUT."+ },+ {+ "number": "109",+ "name": "PG4",+ "type": "bidirectional",+ "description": "GPIO PG4, 5V-tolerant, can function as FMC_A14/FMC_BA0 or EVENTOUT."+ },+ {+ "number": "110",+ "name": "PG5",+ "type": "bidirectional",+ "description": "GPIO PG5, 5V-tolerant, can function as FMC_A15/FMC_BA1 or EVENTOUT."+ },+ {+ "number": "111",+ "name": "PG6",+ "type": "bidirectional",+ "description": "GPIO PG6, 5V-tolerant, can function as FMC_NE3, DCMI_D12, LCD_R7, or EVENTOUT."+ },+ {+ "number": "112",+ "name": "PG7",+ "type": "bidirectional",+ "description": "GPIO PG7, 5V-tolerant, can function as SAI1_MCLK_A, USART6_CK, FMC_INT, DCMI_D13, LCD_CLK, or EVENTOUT."+ },+ {+ "number": "113",+ "name": "PG8",+ "type": "bidirectional",+ "description": "GPIO PG8, 5V-tolerant, can function as SPI6_NSS, SPDIF_RX2, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, LCD_G7, or EVENTOUT."+ },+ {+ "number": "114",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "115",+ "name": "VDDUSB",+ "type": "power_in",+ "description": "USB power supply pin, can be connected to VDD or external USB power supply."+ },+ {+ "number": "116",+ "name": "PC6",+ "type": "bidirectional",+ "description": "GPIO PC6, 5V-tolerant, can function as TIM3_CH1, TIM8_CH1, I2S2_MCK, DFSDM1_CKIN3, USART6_TX, FMC_NWAIT, SDMMC2_D6, SDMMC1_D6, DCMI_D0, LCD_HSYNC, or EVENTOUT."+ },+ {+ "number": "117",+ "name": "PC7",+ "type": "bidirectional",+ "description": "GPIO PC7, 5V-tolerant, can function as TIM3_CH2, TIM8_CH2, I2S3_MCK, DFSDM1_DATIN3, USART6_RX, FMC_NE1, SDMMC2_D7, SDMMC1_D7, DCMI_D1, LCD_G6, or EVENTOUT."+ },+ {+ "number": "118",+ "name": "PC8",+ "type": "bidirectional",+ "description": "GPIO PC8, 5V-tolerant, can function as TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, FMC_NE2/NCE, SDMMC1_D0, DCMI_D2, or EVENTOUT."+ },+ {+ "number": "119",+ "name": "PC9",+ "type": "bidirectional",+ "description": "GPIO PC9, 5V-tolerant, can function as MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, LCD_G3, SDMMC1_D1, DCMI_D3, LCD_B2, or EVENTOUT."+ },+ {+ "number": "120",+ "name": "PA8",+ "type": "bidirectional",+ "description": "GPIO PA8, 5V-tolerant, can function as MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF, CAN3_RX, UART7_RX, LCD_B3, LCD_R6, or EVENTOUT."+ },+ {+ "number": "121",+ "name": "PA9",+ "type": "bidirectional",+ "description": "GPIO PA9, 5V-tolerant with VBUS sensing for OTG_FS, can function as TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0, LCD_R5, or EVENTOUT."+ },+ {+ "number": "122",+ "name": "PA10",+ "type": "bidirectional",+ "description": "GPIO PA10, 5V-tolerant, can function as TIM1_CH3, USART1_RX, LCD_B4, OTG_FS_ID, MDIOS_MDIO, DCMI_D1, LCD_B1, or EVENTOUT."+ },+ {+ "number": "123",+ "name": "PA11",+ "type": "bidirectional",+ "description": "GPIO PA11, 5V-tolerant, can function as TIM1_CH4, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, CAN1_RX, OTG_FS_DM, LCD_R4, or EVENTOUT."+ },+ {+ "number": "124",+ "name": "PA12",+ "type": "bidirectional",+ "description": "GPIO PA12, 5V-tolerant, can function as TIM1_ETR, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP, LCD_R5, or EVENTOUT."+ },+ {+ "number": "125",+ "name": "PA13(JTMS-SWDIO)",+ "type": "bidirectional",+ "description": "GPIO PA13, 5V-tolerant JTAG/SWD pin, can function as JTMS-SWDIO or EVENTOUT for debugging interface."+ },+ {+ "number": "126",+ "name": "VCAP_2",+ "type": "power_in",+ "description": "Voltage regulator bypass capacitor pin, requires external capacitor for internal regulator."+ },+ {+ "number": "127",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "128",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "129",+ "name": "PH13",+ "type": "bidirectional",+ "description": "GPIO PH13, 5V-tolerant, can function as TIM8_CH1N, UART4_TX, CAN1_TX, FMC_D21, LCD_G2, or EVENTOUT."+ },+ {+ "number": "130",+ "name": "PH14",+ "type": "bidirectional",+ "description": "GPIO PH14, 5V-tolerant, can function as TIM8_CH2N, UART4_RX, CAN1_RX, FMC_D22, DCMI_D4, LCD_G3, or EVENTOUT."+ },+ {+ "number": "131",+ "name": "PH15",+ "type": "bidirectional",+ "description": "GPIO PH15, 5V-tolerant, can function as TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4, or EVENTOUT."+ },+ {+ "number": "132",+ "name": "PI0",+ "type": "bidirectional",+ "description": "GPIO PI0, 5V-tolerant, can function as TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5, or EVENTOUT."+ },+ {+ "number": "133",+ "name": "PI1",+ "type": "bidirectional",+ "description": "GPIO PI1, 5V-tolerant, can function as TIM8_BKIN2, SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6, or EVENTOUT."+ },+ {+ "number": "134",+ "name": "PI2",+ "type": "bidirectional",+ "description": "GPIO PI2, 5V-tolerant, can function as TIM8_CH4, SPI2_MISO, FMC_D26, DCMI_D9, LCD_G7, or EVENTOUT."+ },+ {+ "number": "135",+ "name": "PI3",+ "type": "bidirectional",+ "description": "GPIO PI3, 5V-tolerant, can function as TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10, or EVENTOUT."+ },+ {+ "number": "136",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "137",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "138",+ "name": "PA14(JTCK-SWCLK)",+ "type": "bidirectional",+ "description": "GPIO PA14, 5V-tolerant JTAG/SWD clock pin, can function as JTCK-SWCLK or EVENTOUT for debugging interface."+ },+ {+ "number": "139",+ "name": "PA15(JTDI)",+ "type": "bidirectional",+ "description": "GPIO PA15, 5V-tolerant JTAG pin, can function as JTDI, TIM2_CH1/ETR, HDMI_CEC, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, SPI6_NSS, UART4_RTS, CAN3_TX, UART7_TX, or EVENTOUT."+ },+ {+ "number": "140",+ "name": "PC10",+ "type": "bidirectional",+ "description": "GPIO PC10, 5V-tolerant, can function as DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2, DCMI_D8, LCD_R2, or EVENTOUT."+ },+ {+ "number": "141",+ "name": "PC11",+ "type": "bidirectional",+ "description": "GPIO PC11, 5V-tolerant, can function as DFSDM1_DATIN5, SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3, DCMI_D4, or EVENTOUT."+ },+ {+ "number": "142",+ "name": "PC12",+ "type": "bidirectional",+ "description": "GPIO PC12, 5V-tolerant, can function as TRACED3, SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9, or EVENTOUT."+ },+ {+ "number": "143",+ "name": "PD0",+ "type": "bidirectional",+ "description": "GPIO PD0, 5V-tolerant, can function as DFSDM1_CKIN6, DFSDM1_DATIN7, UART4_RX, CAN1_RX, FMC_D2, or EVENTOUT."+ },+ {+ "number": "144",+ "name": "PD1",+ "type": "bidirectional",+ "description": "GPIO PD1, 5V-tolerant, can function as DFSDM1_DATIN6, DFSDM1_CKIN7, UART4_TX, CAN1_TX, FMC_D3, or EVENTOUT."+ },+ {+ "number": "145",+ "name": "PD2",+ "type": "bidirectional",+ "description": "GPIO PD2, 5V-tolerant, can function as TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD, DCMI_D11, or EVENTOUT."+ },+ {+ "number": "146",+ "name": "PD3",+ "type": "bidirectional",+ "description": "GPIO PD3, 5V-tolerant, can function as DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, DFSDM1_DATIN0, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, or EVENTOUT."+ },+ {+ "number": "147",+ "name": "PD4",+ "type": "bidirectional",+ "description": "GPIO PD4, 5V-tolerant, can function as DFSDM1_CKIN0, USART2_RTS, FMC_NOE, or EVENTOUT."+ },+ {+ "number": "148",+ "name": "PD5",+ "type": "bidirectional",+ "description": "GPIO PD5, 5V-tolerant, can function as USART2_TX, FMC_NWE, or EVENTOUT."+ },+ {+ "number": "149",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "150",+ "name": "VDDSDMMC",+ "type": "power_in",+ "description": "Dedicated power supply for SD/MMC interfaces."+ },+ {+ "number": "151",+ "name": "PD6",+ "type": "bidirectional",+ "description": "GPIO PD6, 5V-tolerant, can function as DFSDM1_CKIN4, SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, DFSDM1_DATIN1, SDMMC2_CK, FMC_NWAIT, DCMI_D10, LCD_B2, or EVENTOUT."+ },+ {+ "number": "152",+ "name": "PD7",+ "type": "bidirectional",+ "description": "GPIO PD7, 5V-tolerant, can function as DFSDM1_DATIN4, SPI1_MOSI/I2S1_SD, DFSDM1_CKIN1, USART2_CK, SPDIF_RX0, SDMMC2_CMD, FMC_NE1, or EVENTOUT."+ },+ {+ "number": "153",+ "name": "PG9",+ "type": "bidirectional",+ "description": "GPIO PG9, 5V-tolerant, can function as SPI1_MISO, SPDIF_RX3, USART6_RX, QUADSPI_BK2_IO2, SAI2_FS_B, SDMMC2_D0, FMC_NE2/NCE, DCMI_VSYNC, or EVENTOUT."+ },+ {+ "number": "154",+ "name": "PG10",+ "type": "bidirectional",+ "description": "GPIO PG10, 5V-tolerant, can function as SPI1_NSS/I2S1_WS, LCD_G3, SAI2_SD_B, SDMMC2_D1, FMC_NE3, DCMI_D2, LCD_B2, or EVENTOUT."+ },+ {+ "number": "155",+ "name": "PG11",+ "type": "bidirectional",+ "description": "GPIO PG11, 5V-tolerant, can function as SPI1_SCK/I2S1_CK, SPDIF_RX0, SDMMC2_D2, ETH_MII_TX_EN/RMII_TX_EN, DCMI_D3, LCD_B3, or EVENTOUT."+ },+ {+ "number": "156",+ "name": "PG12",+ "type": "bidirectional",+ "description": "GPIO PG12, 5V-tolerant, can function as LPTIM1_IN1, SPI6_MISO, SPDIF_RX1, USART6_RTS, LCD_B4, SDMMC2_D3, FMC_NE4, LCD_B1, or EVENTOUT."+ },+ {+ "number": "157",+ "name": "PG13",+ "type": "bidirectional",+ "description": "GPIO PG13, 5V-tolerant, can function as TRACED0, LPTIM1_OUT, SPI6_SCK, USART6_CTS, ETH_MII_TXD0/RMII_TXD0, FMC_A24, LCD_R0, or EVENTOUT."+ },+ {+ "number": "158",+ "name": "PG14",+ "type": "bidirectional",+ "description": "GPIO PG14, 5V-tolerant, can function as TRACED1, LPTIM1_ETR, SPI6_MOSI, USART6_TX, QUADSPI_BK2_IO3, ETH_MII_TXD1/RMII_TXD1, FMC_A25, LCD_B0, or EVENTOUT."+ },+ {+ "number": "159",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "160",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "161",+ "name": "PG15",+ "type": "bidirectional",+ "description": "GPIO PG15, 5V-tolerant, can function as USART6_CTS, FMC_SDNCAS, DCMI_D13, or EVENTOUT."+ },+ {+ "number": "162",+ "name": "PB3(JTDO/TRACESWO)",+ "type": "bidirectional",+ "description": "GPIO PB3, 5V-tolerant JTAG pin, can function as JTDO/TRACESWO, TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SPI6_SCK, SDMMC2_D2, CAN3_RX, UART7_RX, or EVENTOUT."+ },+ {+ "number": "163",+ "name": "PB4(NJTRST)",+ "type": "bidirectional",+ "description": "GPIO PB4, 5V-tolerant JTAG pin, can function as NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, SPI2_NSS/I2S2_WS, SPI6_MISO, SDMMC2_D3, CAN3_TX, UART7_TX, or EVENTOUT."+ },+ {+ "number": "164",+ "name": "PB5",+ "type": "bidirectional",+ "description": "GPIO PB5, 5V-tolerant, can function as UART5_RX, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, SPI6_MOSI, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, LCD_G7, or EVENTOUT."+ },+ {+ "number": "165",+ "name": "PB6",+ "type": "bidirectional",+ "description": "GPIO PB6, 5V-tolerant, can function as UART5_TX, TIM4_CH1, HDMI_CEC, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, I2C4_SCL, FMC_SDNE1, DCMI_D5, or EVENTOUT."+ },+ {+ "number": "166",+ "name": "PB7",+ "type": "bidirectional",+ "description": "GPIO PB7, 5V-tolerant, can function as TIM4_CH2, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, I2C4_SDA, FMC_NL, DCMI_VSYNC, or EVENTOUT."+ },+ {+ "number": "167",+ "name": "PE0",+ "type": "bidirectional",+ "description": "GPIO PE0, 5V-tolerant, can function as TIM4_ETR, LPTIM1_ETR, UART8_RX, SAI2_MCLK_A, FMC_NBL0, DCMI_D2, or EVENTOUT."+ },+ {+ "number": "168",+ "name": "PE1",+ "type": "bidirectional",+ "description": "GPIO PE1, 5V-tolerant, can function as LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3, or EVENTOUT."+ },+ {+ "number": "169",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "170",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "171",+ "name": "PI4",+ "type": "bidirectional",+ "description": "GPIO PI4, 5V-tolerant, can function as TIM8_BKIN, SAI2_MCLK_A, FMC_NBL2, DCMI_D5, LCD_B4, or EVENTOUT."+ },+ {+ "number": "172",+ "name": "PI5",+ "type": "bidirectional",+ "description": "GPIO PI5, 5V-tolerant, can function as TIM8_CH1, SAI2_SCK_A, FMC_NBL3, DCMI_VSYNC, LCD_B5, or EVENTOUT."+ },+ {+ "number": "173",+ "name": "PI6",+ "type": "bidirectional",+ "description": "GPIO PI6, 5V-tolerant, can function as TIM8_CH2, SAI2_SD_A, FMC_D28, DCMI_D6, LCD_B6, or EVENTOUT."+ },+ {+ "number": "174",+ "name": "PI7",+ "type": "bidirectional",+ "description": "GPIO PI7, 5V-tolerant, can function as TIM8_CH3, SAI2_FS_A, FMC_D29, DCMI_D7, LCD_B7, or EVENTOUT."+ },+ {+ "number": "175",+ "name": "PI8",+ "type": "bidirectional",+ "description": "GPIO PI8, 5V-tolerant with limited output drive via power switch, can function as EVENTOUT or RTC_TAMP2."+ },+ {+ "number": "176",+ "name": "PI9",+ "type": "bidirectional",+ "description": "GPIO PI9, 5V-tolerant, can function as UART4_RX, CAN1_RX, FMC_D30, LCD_VSYNC, or EVENTOUT."+ },+ {+ "number": "177",+ "name": "PI10",+ "type": "bidirectional",+ "description": "GPIO PI10, 5V-tolerant, can function as ETH_MII_RX_ER, FMC_D31, LCD_HSYNC, or EVENTOUT."+ },+ {+ "number": "178",+ "name": "PI11",+ "type": "bidirectional",+ "description": "GPIO PI11, 5V-tolerant, wakeup capable, can function as LCD_G6, OTG_HS_ULPI_DIR, or EVENTOUT."+ },+ {+ "number": "179",+ "name": "PI12",+ "type": "bidirectional",+ "description": "GPIO PI12, 5V-tolerant, can function as LCD_HSYNC or EVENTOUT."+ },+ {+ "number": "180",+ "name": "PI13",+ "type": "bidirectional",+ "description": "GPIO PI13, 5V-tolerant, can function as LCD_VSYNC or EVENTOUT."+ },+ {+ "number": "181",+ "name": "PI14",+ "type": "bidirectional",+ "description": "GPIO PI14, 5V-tolerant, can function as LCD_CLK or EVENTOUT."+ },+ {+ "number": "182",+ "name": "PI15",+ "type": "bidirectional",+ "description": "GPIO PI15, 5V-tolerant, can function as LCD_G2, LCD_R0, or EVENTOUT."+ },+ {+ "number": "183",+ "name": "PJ0",+ "type": "bidirectional",+ "description": "GPIO PJ0, 5V-tolerant, can function as LCD_R7, LCD_R1, or EVENTOUT."+ },+ {+ "number": "184",+ "name": "PJ1",+ "type": "bidirectional",+ "description": "GPIO PJ1, 5V-tolerant, can function as LCD_R2 or EVENTOUT."+ },+ {+ "number": "185",+ "name": "PJ2",+ "type": "bidirectional",+ "description": "GPIO PJ2, 5V-tolerant, can function as DSI_TE, LCD_R3, or EVENTOUT."+ },+ {+ "number": "186",+ "name": "PJ3",+ "type": "bidirectional",+ "description": "GPIO PJ3, 5V-tolerant, can function as LCD_R4 or EVENTOUT."+ },+ {+ "number": "187",+ "name": "PJ4",+ "type": "bidirectional",+ "description": "GPIO PJ4, 5V-tolerant, can function as LCD_R5 or EVENTOUT."+ },+ {+ "number": "188",+ "name": "PJ5",+ "type": "bidirectional",+ "description": "GPIO PJ5, 5V-tolerant, can function as LCD_R6 or EVENTOUT."+ },+ {+ "number": "189",+ "name": "PJ6",+ "type": "bidirectional",+ "description": "GPIO PJ6, 5V-tolerant, can function as LCD_R7 or EVENTOUT."+ },+ {+ "number": "190",+ "name": "PJ7",+ "type": "bidirectional",+ "description": "GPIO PJ7, 5V-tolerant, can function as LCD_G0 or EVENTOUT."+ },+ {+ "number": "191",+ "name": "PJ8",+ "type": "bidirectional",+ "description": "GPIO PJ8, 5V-tolerant, can function as LCD_G1 or EVENTOUT."+ },+ {+ "number": "192",+ "name": "PJ9",+ "type": "bidirectional",+ "description": "GPIO PJ9, 5V-tolerant, can function as LCD_G2 or EVENTOUT."+ },+ {+ "number": "193",+ "name": "PJ10",+ "type": "bidirectional",+ "description": "GPIO PJ10, 5V-tolerant, can function as LCD_G3 or EVENTOUT."+ },+ {+ "number": "194",+ "name": "PJ11",+ "type": "bidirectional",+ "description": "GPIO PJ11, 5V-tolerant, can function as LCD_G4 or EVENTOUT."+ },+ {+ "number": "195",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) pin."+ },+ {+ "number": "196",+ "name": "VDD",+ "type": "power_in",+ "description": "Main power supply pin, 1.7V to 3.6V."+ },+ {+ "number": "197",+ "name": "PK3",+ "type": "bidirectional",+ "description": "GPIO PK3, 5V-tolerant, can function as LCD_B4 or EVENTOUT."+ },+ {+ "number": "198",+ "name": "PK4",+ "type": "bidirectional",+ "description": "GPIO PK4, 5V-tolerant, can function as LCD_B5 or EVENTOUT."+ },+ {+ "number": "199",+ "name": "PK5",+ "type": "bidirectional",+ "description": "GPIO PK5, 5V-tolerant, can function as LCD_B6 or EVENTOUT."+ },+ {+ "number": "200",+ "name": "PK6",+ "type": "bidirectional",+ "description": "GPIO PK6, 5V-tolerant, can function as LCD_B7 or EVENTOUT."+ },+ {+ "number": "201",+ "name": "PK7",+ "type": "bidirectional",+ "description": "GPIO PK7, 5V-tolerant, can function as LCD_DE or EVENTOUT."+ },+ {+ "number": "202",+ "name": "PB12",+ "type": "bidirectional",+ "description": "GPIO PB12, 5V-tolerant, can function as TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, DFSDM1_DATIN1, USART3_CK, UART5_RX, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/RMII_TXD0, OTG_HS_ID, or EVENTOUT."+ },+ {+ "number": "203",+ "name": "PB13",+ "type": "bidirectional",+ "description": "GPIO PB13, 5V-tolerant with VBUS sensing for OTG_HS, can function as TIM1_CH1N, SPI2_SCK/I2S2_CK, DFSDM1_CKIN1, USART3_CTS, UART5_TX, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/RMII_TXD1, or EVENTOUT."+ },+ {+ "number": "204",+ "name": "PB14",+ "type": "bidirectional",+ "description": "GPIO PB14, 5V-tolerant, can function as TIM1_CH2N, TIM8_CH2N, USART1_TX, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS, UART4_RTS, TIM12_CH1, SDMMC2_D0, OTG_HS_DM, or EVENTOUT."+ },+ {+ "number": "205",+ "name": "PB15",+ "type": "bidirectional",+ "description": "GPIO PB15, 5V-tolerant, can function as RTC_REFIN, TIM1_CH3N, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SD, DFSDM1_CKIN2, UART4_CTS, TIM12_CH2, SDMMC2_D1, OTG_HS_DP, or EVENTOUT."+ },+ {+ "number": "206",+ "name": "PD8",+ "type": "bidirectional",+ "description": "GPIO PD8, 5V-tolerant, can function as DFSDM1_CKIN3, USART3_TX, SPDIF_RX1, FMC_D13, or EVENTOUT."+ },+ {+ "number": "207",+ "name": "PD9",+ "type": "bidirectional",+ "description": "GPIO PD9, 5V-tolerant, can function as DFSDM1_DATIN3, USART3_RX, FMC_D14, or EVENTOUT."+ },+ {+ "number": "208",+ "name": "PD10",+ "type": "bidirectional",+ "description": "GPIO PD10, 5V-tolerant, can function as DFSDM1_CKOUT, USART3_CK, FMC_D15, LCD_B3, or EVENTOUT."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588858513787662336",+ "pages": 256,+ "sha256": "3d2a3b76d5ba156e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 208,+ "described": 208,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}