Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F767BIT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-208(28x28)

STM32F767BIT6 from STMicroelectronics, in a LQFP-208(28x28). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional GPIO PE2, 5V-tolerant, can function as TRACECLK, SPI4_SCK, SAI1_MCLK_A, QUADSPI_BK1_IO2, ETH_MII_TXD3, FMC_A23, or EVENTOUT.
2 PE3 bidirectional GPIO PE3, 5V-tolerant, can function as TRACED0, SAI1_SD_B, FMC_A19, or EVENTOUT.
3 PE4 bidirectional GPIO PE4, 5V-tolerant, can function as TRACED1, SPI4_NSS, SAI1_FS_A, DFSDM1_DATIN3, FMC_A20, DCMI_D4, LCD_B0, or EVENTOUT.
4 PE5 bidirectional GPIO PE5, 5V-tolerant, can function as TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, DFSDM1_CKIN3, FMC_A21, DCMI_D6, LCD_G0, or EVENTOUT.
5 PE6 bidirectional GPIO PE6, 5V-tolerant, can function as TRACED3, TIM1_BKIN2, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCLK_B, FMC_A22, DCMI_D7, LCD_G1, or EVENTOUT.
6 VBAT power_in Backup battery supply voltage pin, 1.7V to 3.6V.
7 PI8 bidirectional GPIO PI8, 5V-tolerant, can function as EVENTOUT, RTC_TAMP2, RTC_TS, or WKUP5.
8 PC13 bidirectional GPIO PC13, 5V-tolerant with limited output drive via power switch (max 2 MHz, 30 pF load), can function as EVENTOUT, RTC_TAMP1, RTC_TS, RTC_OUT, or WKUP4.
9 PC14/OSC32_IN bidirectional GPIO PC14, 5V-tolerant except in analog/oscillator mode, can function as EVENTOUT or OSC32_IN for 32 kHz oscillator.
10 PC15/OSC32_OUT bidirectional GPIO PC15, 5V-tolerant except in analog/oscillator mode, can function as EVENTOUT or OSC32_OUT for 32 kHz oscillator.
11 PI9 bidirectional GPIO PI9, 5V-tolerant, can function as UART4_RX, CAN1_RX, FMC_D30, LCD_VSYNC, or EVENTOUT.
12 PI10 bidirectional GPIO PI10, 5V-tolerant, can function as ETH_MII_RX_ER, FMC_D31, LCD_HSYNC, or EVENTOUT.
13 PI11 bidirectional GPIO PI11, 5V-tolerant, wakeup capable, can function as LCD_G6, OTG_HS_ULPI_DIR, or EVENTOUT.
14 VSS power_in Ground (GND) pin.
15 VDD power_in Main power supply pin, 1.7V to 3.6V.
16 PF0 bidirectional GPIO PF0, 5V-tolerant, can function as I2C2_SDA, FMC_A0, or EVENTOUT.
17 PF1 bidirectional GPIO PF1, 5V-tolerant, can function as I2C2_SCL, FMC_A1, or EVENTOUT.
18 PF2 bidirectional GPIO PF2, 5V-tolerant, can function as I2C2_SMBA, FMC_A2, or EVENTOUT.
19 PI12 bidirectional GPIO PI12, 5V-tolerant, can function as LCD_HSYNC or EVENTOUT.
20 PI13 bidirectional GPIO PI13, 5V-tolerant, can function as LCD_VSYNC or EVENTOUT.
21 PI14 bidirectional GPIO PI14, 5V-tolerant, can function as LCD_CLK or EVENTOUT.
22 PF3 bidirectional GPIO PF3, 5V-tolerant, can function as FMC_A3 or EVENTOUT, with ADC3_IN9 analog input.
23 PF4 bidirectional GPIO PF4, 5V-tolerant, can function as FMC_A4 or EVENTOUT, with ADC3_IN14 analog input.
24 PF5 bidirectional GPIO PF5, 5V-tolerant, can function as FMC_A5 or EVENTOUT, with ADC3_IN15 analog input.
25 VSS power_in Ground (GND) pin.
26 VDD power_in Main power supply pin, 1.7V to 3.6V.
27 PF6 bidirectional GPIO PF6, 5V-tolerant, can function as TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_RX, QUADSPI_BK1_IO3, or EVENTOUT, with ADC3_IN4 analog input.
28 PF7 bidirectional GPIO PF7, 5V-tolerant, can function as TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_TX, QUADSPI_BK1_IO2, or EVENTOUT, with ADC3_IN5 analog input.
29 PF8 bidirectional GPIO PF8, 5V-tolerant, can function as SPI5_MISO, SAI1_SCK_B, UART7_RTS, TIM13_CH1, QUADSPI_BK1_IO0, or EVENTOUT, with ADC3_IN6 analog input.
30 PF9 bidirectional GPIO PF9, 5V-tolerant, can function as SPI5_MOSI, SAI1_FS_B, UART7_CTS, TIM14_CH1, QUADSPI_BK1_IO1, or EVENTOUT, with ADC3_IN7 analog input.
31 PF10 bidirectional GPIO PF10, 5V-tolerant, can function as QUADSPI_CLK, DCMI_D11, LCD_DE, or EVENTOUT, with ADC3_IN8 analog input.
32 PH0/OSC_IN bidirectional GPIO PH0, 5V-tolerant except in oscillator mode, can function as EVENTOUT or OSC_IN for main crystal oscillator (4-26 MHz).
33 PH1/OSC_OUT bidirectional GPIO PH1, 5V-tolerant except in oscillator mode, can function as EVENTOUT or OSC_OUT for main crystal oscillator.
34 NRST input Reset input pin with internal weak pull-up, active low, supports external reset source and programming.
35 PC0 bidirectional GPIO PC0, 5V-tolerant, can function as DFSDM1_CKIN0, DFSDM1_DATIN4, SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, LCD_R5, or EVENTOUT, with ADC1/2/3_IN10 analog inputs.
36 PC1 bidirectional GPIO PC1, 5V-tolerant, can function as TRACED0, DFSDM1_DATIN0, SPI2_MOSI/I2S2_SD, SAI1_SD_A, DFSDM1_CKIN4, ETH_MDC, MDIOS_MDC, or EVENTOUT, with ADC1/2/3_IN11 analog inputs and RTC_TAMP3/WKUP3.
37 PC2 bidirectional GPIO PC2, 5V-tolerant with limited output drive via power switch, can function as DFSDM1_CKIN1, SPI2_MISO, DFSDM1_CKOUT, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, or EVENTOUT, with ADC1/2/3_IN12 analog inputs.
38 PC3 bidirectional GPIO PC3, 5V-tolerant with limited output drive via power switch, can function as DFSDM1_DATIN1, SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, or EVENTOUT, with ADC1/2/3_IN13 analog inputs.
39 VDD power_in Main power supply pin, 1.7V to 3.6V.
40 VSSA power_in Analog ground pin for ADC and DAC.
41 VREF+ power_in ADC positive reference voltage pin, 1.8V to VDD with recommended decoupling capacitor.
42 VDDA power_in Analog power supply for ADC/DAC, 1.7V to 3.6V with dedicated decoupling capacitor.
43 PA0/WKUP bidirectional GPIO PA0, 5V-tolerant, wakeup capable (WKUP1), can function as TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B, ETH_MII_CRS, or EVENTOUT, with ADC1/2/3_IN0 analog inputs.
44 PA1 bidirectional GPIO PA1, 5V-tolerant, can function as TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCLK_B, ETH_MII_RX_CLK/RMII_REF_CLK, LCD_R2, or EVENTOUT, with ADC1/2/3_IN1 analog inputs.
45 PA2 bidirectional GPIO PA2, 5V-tolerant, wakeup capable (WKUP2), can function as TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B, ETH_MDIO, MDIOS_MDIO, LCD_R1, or EVENTOUT, with ADC1/2/3_IN2 analog inputs.
46 PH2 bidirectional GPIO PH2, 5V-tolerant, can function as LPTIM1_IN2, QUADSPI_BK2_IO0, SAI2_SCK_B, ETH_MII_CRS, FMC_SDCKE0, LCD_R0, or EVENTOUT.
47 PH3 bidirectional GPIO PH3, 5V-tolerant, can function as QUADSPI_BK2_IO1, SAI2_MCLK_B, ETH_MII_COL, FMC_SDNE0, LCD_R1, or EVENTOUT.
48 PH4 bidirectional
49 PH5 bidirectional
50 PA3 bidirectional GPIO PA3, 5V-tolerant, can function as TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, LCD_B2, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, or EVENTOUT, with ADC1/2/3_IN3 analog inputs.
51 VSS power_in Ground (GND) pin.
52 VDD power_in Main power supply pin, 1.7V to 3.6V.
53 PA4 bidirectional GPIO PA4, 3.3V-tolerant ADC input, can function as SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, SPI6_NSS, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, or EVENTOUT, with ADC1/2_IN4 and DAC_OUT1.
54 PA5 bidirectional GPIO PA5, 3.3V-tolerant ADC input, can function as TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, SPI6_SCK, OTG_HS_ULPI_CK, LCD_R4, or EVENTOUT, with ADC1/2_IN5 and DAC_OUT2.
55 PA6 bidirectional GPIO PA6, 5V-tolerant, can function as TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, SPI6_MISO, TIM13_CH1, MDIOS_MDC, DCMI_PIXCLK, LCD_G2, or EVENTOUT, with ADC1/2_IN6 analog inputs.
56 PA7 bidirectional GPIO PA7, 5V-tolerant, can function as TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, SPI6_MOSI, TIM14_CH1, ETH_MII_RX_DV/RMII_CRS_DV, FMC_SDNWE, or EVENTOUT, with ADC1/2_IN7 analog inputs.
57 PC4 bidirectional GPIO PC4, 5V-tolerant, can function as DFSDM1_CKIN2, I2S1_MCK, SPDIF_RX2, ETH_MII_RXD0/RMII_RXD0, FMC_SDNE0, or EVENTOUT, with ADC1/2_IN14 analog inputs.
58 PC5 bidirectional GPIO PC5, 5V-tolerant, can function as DFSDM1_DATIN2, SPDIF_RX3, ETH_MII_RXD1/RMII_RXD1, FMC_SDCKE0, or EVENTOUT, with ADC1/2_IN15 analog inputs.
59 VDD power_in Main power supply pin, 1.7V to 3.6V.
60 VSS power_in Ground (GND) pin.
61 PB0 bidirectional GPIO PB0, 5V-tolerant, can function as TIM1_CH2N, TIM3_CH3, TIM8_CH2N, DFSDM1_CKOUT, UART4_CTS, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, LCD_G1, or EVENTOUT, with ADC1/2_IN8 analog inputs.
62 PB1 bidirectional GPIO PB1, 5V-tolerant, can function as TIM1_CH3N, TIM3_CH4, TIM8_CH3N, DFSDM1_DATIN1, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, LCD_G0, or EVENTOUT, with ADC1/2_IN9 analog inputs.
63 PB2 bidirectional GPIO PB2, 5V-tolerant, can function as SAI1_SD_A, SPI3_MOSI/I2S3_SD, QUADSPI_CLK, DFSDM1_CKIN1, or EVENTOUT.
64 PI15 bidirectional GPIO PI15, 5V-tolerant, can function as LCD_G2, LCD_R0, or EVENTOUT.
65 PJ0 bidirectional GPIO PJ0, 5V-tolerant, can function as LCD_R7, LCD_R1, or EVENTOUT.
66 PJ1 bidirectional GPIO PJ1, 5V-tolerant, can function as LCD_R2 or EVENTOUT.
67 PJ2 bidirectional GPIO PJ2, 5V-tolerant, can function as DSI_TE, LCD_R3, or EVENTOUT.
68 PJ3 bidirectional GPIO PJ3, 5V-tolerant, can function as LCD_R4 or EVENTOUT.
69 PJ4 bidirectional GPIO PJ4, 5V-tolerant, can function as LCD_R5 or EVENTOUT.
70 PF11 bidirectional GPIO PF11, 5V-tolerant, can function as SPI5_MOSI, SAI2_SD_B, FMC_SDNRAS, DCMI_D12, or EVENTOUT.
71 PF12 bidirectional GPIO PF12, 5V-tolerant, can function as FMC_A6 or EVENTOUT.
72 VSS power_in Ground (GND) pin.
73 VDD power_in Main power supply pin, 1.7V to 3.6V.
74 PF13 bidirectional GPIO PF13, 5V-tolerant, can function as I2C4_SMBA, DFSDM1_DATIN6, FMC_A7, or EVENTOUT.
75 PF14 bidirectional GPIO PF14, 5V-tolerant, can function as I2C4_SCL, DFSDM1_CKIN6, FMC_A8, or EVENTOUT.
76 PF15 bidirectional GPIO PF15, 5V-tolerant, can function as I2C4_SDA, FMC_A9, or EVENTOUT.
77 PG0 bidirectional GPIO PG0, 5V-tolerant, can function as FMC_A10 or EVENTOUT.
78 PG1 bidirectional GPIO PG1, 5V-tolerant, can function as FMC_A11 or EVENTOUT.
79 PE7 bidirectional GPIO PE7, 5V-tolerant, can function as TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0, FMC_D4, or EVENTOUT.
80 PE8 bidirectional GPIO PE8, 5V-tolerant, can function as TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5, or EVENTOUT.
81 PE9 bidirectional GPIO PE9, 5V-tolerant, can function as TIM1_CH1, DFSDM1_CKOUT, UART7_RTS, QUADSPI_BK2_IO2, FMC_D6, or EVENTOUT.
82 VSS power_in Ground (GND) pin.
83 VDD power_in Main power supply pin, 1.7V to 3.6V.
84 PE10 bidirectional GPIO PE10, 5V-tolerant, can function as TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3, FMC_D7, or EVENTOUT.
85 PE11 bidirectional GPIO PE11, 5V-tolerant, can function as TIM1_CH2, SPI4_NSS, DFSDM1_CKIN4, SAI2_SD_B, FMC_D8, LCD_G3, or EVENTOUT.
86 PE12 bidirectional GPIO PE12, 5V-tolerant, can function as TIM1_CH3N, SPI4_SCK, DFSDM1_DATIN5, SAI2_SCK_B, FMC_D9, LCD_B4, or EVENTOUT.
87 PE13 bidirectional GPIO PE13, 5V-tolerant, can function as TIM1_CH3, SPI4_MISO, DFSDM1_CKIN5, SAI2_FS_B, FMC_D10, LCD_DE, or EVENTOUT.
88 PE14 bidirectional GPIO PE14, 5V-tolerant, can function as TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11, LCD_CLK, or EVENTOUT.
89 PE15 bidirectional GPIO PE15, 5V-tolerant, can function as TIM1_BKIN, FMC_D12, LCD_R7, or EVENTOUT.
90 PB10 bidirectional GPIO PB10, 5V-tolerant, can function as TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, DFSDM1_DATIN7, USART3_TX, QUADSPI_BK1_NCS, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, or EVENTOUT.
91 PB11 bidirectional GPIO PB11, 5V-tolerant, can function as TIM2_CH4, I2C2_SDA, DFSDM1_CKIN7, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/RMII_TX_EN, DSI_TE, LCD_G5, or EVENTOUT.
92 VCAP_1 power_in Voltage regulator bypass capacitor pin, requires external capacitor for internal regulator.
93 VSS power_in Ground (GND) pin.
94 VDD power_in Main power supply pin, 1.7V to 3.6V.
95 PJ5 bidirectional GPIO PJ5, 5V-tolerant, can function as LCD_R6 or EVENTOUT.
96 PH6 bidirectional GPIO PH6, 5V-tolerant, can function as I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8, or EVENTOUT.
97 PH7 bidirectional GPIO PH7, 5V-tolerant, can function as I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9, or EVENTOUT.
98 PH8 bidirectional GPIO PH8, 5V-tolerant, can function as I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2, or EVENTOUT.
99 PH9 bidirectional GPIO PH9, 5V-tolerant, can function as I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3, or EVENTOUT.
100 PH10 bidirectional GPIO PH10, 5V-tolerant, can function as TIM5_CH1, I2C4_SMBA, FMC_D18, DCMI_D1, LCD_R4, or EVENTOUT.
101 PH11 bidirectional GPIO PH11, 5V-tolerant, can function as TIM5_CH2, I2C4_SCL, FMC_D19, DCMI_D2, LCD_R5, or EVENTOUT.
102 PH12 bidirectional GPIO PH12, 5V-tolerant, can function as TIM5_CH3, I2C4_SDA, FMC_D20, DCMI_D3, LCD_R6, or EVENTOUT.
103 VDD power_in Main power supply pin, 1.7V to 3.6V.
104 PB12 bidirectional GPIO PB12, 5V-tolerant, can function as TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, DFSDM1_DATIN1, USART3_CK, UART5_RX, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/RMII_TXD0, OTG_HS_ID, or EVENTOUT.
105 PB13 bidirectional GPIO PB13, 5V-tolerant with VBUS sensing for OTG_HS, can function as TIM1_CH1N, SPI2_SCK/I2S2_CK, DFSDM1_CKIN1, USART3_CTS, UART5_TX, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/RMII_TXD1, or EVENTOUT.
106 PB14 bidirectional GPIO PB14, 5V-tolerant, can function as TIM1_CH2N, TIM8_CH2N, USART1_TX, SPI2_MISO, DFSDM1_DATIN2, USART3_RTS, UART4_RTS, TIM12_CH1, SDMMC2_D0, OTG_HS_DM, or EVENTOUT.
107 PB15 bidirectional GPIO PB15, 5V-tolerant, can function as RTC_REFIN, TIM1_CH3N, TIM8_CH3N, USART1_RX, SPI2_MOSI/I2S2_SD, DFSDM1_CKIN2, UART4_CTS, TIM12_CH2, SDMMC2_D1, OTG_HS_DP, or EVENTOUT.
108 PD8 bidirectional GPIO PD8, 5V-tolerant, can function as DFSDM1_CKIN3, USART3_TX, SPDIF_RX1, FMC_D13, or EVENTOUT.
109 PD9 bidirectional GPIO PD9, 5V-tolerant, can function as DFSDM1_DATIN3, USART3_RX, FMC_D14, or EVENTOUT.
110 PD10 bidirectional GPIO PD10, 5V-tolerant, can function as DFSDM1_CKOUT, USART3_CK, FMC_D15, LCD_B3, or EVENTOUT.
111 PD11 bidirectional
112 PD12 bidirectional
113 PD13 bidirectional
114 VSS power_in Ground (GND) pin.
115 VDD power_in Main power supply pin, 1.7V to 3.6V.
116 PD14 bidirectional
117 PD15 bidirectional
118 PJ6 bidirectional GPIO PJ6, 5V-tolerant, can function as LCD_R7 or EVENTOUT.
119 PJ7 bidirectional GPIO PJ7, 5V-tolerant, can function as LCD_G0 or EVENTOUT.
120 PJ8 bidirectional GPIO PJ8, 5V-tolerant, can function as LCD_G1 or EVENTOUT.
121 PJ9 bidirectional GPIO PJ9, 5V-tolerant, can function as LCD_G2 or EVENTOUT.
122 PJ10 bidirectional GPIO PJ10, 5V-tolerant, can function as LCD_G3 or EVENTOUT.
123 PJ11 bidirectional GPIO PJ11, 5V-tolerant, can function as LCD_G4 or EVENTOUT.
124 VDD power_in Main power supply pin, 1.7V to 3.6V.
125 VSS power_in Ground (GND) pin.
126 PK0 bidirectional GPIO PK0, 5V-tolerant, can function as LCD_G5 or EVENTOUT.
127 PK1 bidirectional GPIO PK1, 5V-tolerant, can function as LCD_G6 or EVENTOUT.
128 PK2 bidirectional GPIO PK2, 5V-tolerant, can function as LCD_G7 or EVENTOUT.
129 PG2 bidirectional GPIO PG2, 5V-tolerant, can function as FMC_A12 or EVENTOUT.
130 PG3 bidirectional GPIO PG3, 5V-tolerant, can function as FMC_A13 or EVENTOUT.
131 PG4 bidirectional GPIO PG4, 5V-tolerant, can function as FMC_A14/FMC_BA0 or EVENTOUT.
132 PG5 bidirectional GPIO PG5, 5V-tolerant, can function as FMC_A15/FMC_BA1 or EVENTOUT.
133 PG6 bidirectional GPIO PG6, 5V-tolerant, can function as FMC_NE3, DCMI_D12, LCD_R7, or EVENTOUT.
134 PG7 bidirectional GPIO PG7, 5V-tolerant, can function as SAI1_MCLK_A, USART6_CK, FMC_INT, DCMI_D13, LCD_CLK, or EVENTOUT.
135 PG8 bidirectional GPIO PG8, 5V-tolerant, can function as SPI6_NSS, SPDIF_RX2, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, LCD_G7, or EVENTOUT.
136 VSS power_in Ground (GND) pin.
137 VDDUSB power_in USB power supply pin, can be connected to VDD or external USB power supply.
138 PC6 bidirectional GPIO PC6, 5V-tolerant, can function as TIM3_CH1, TIM8_CH1, I2S2_MCK, DFSDM1_CKIN3, USART6_TX, FMC_NWAIT, SDMMC2_D6, SDMMC1_D6, DCMI_D0, LCD_HSYNC, or EVENTOUT.
139 PC7 bidirectional GPIO PC7, 5V-tolerant, can function as TIM3_CH2, TIM8_CH2, I2S3_MCK, DFSDM1_DATIN3, USART6_RX, FMC_NE1, SDMMC2_D7, SDMMC1_D7, DCMI_D1, LCD_G6, or EVENTOUT.
140 PC8 bidirectional GPIO PC8, 5V-tolerant, can function as TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, FMC_NE2/NCE, SDMMC1_D0, DCMI_D2, or EVENTOUT.
141 PC9 bidirectional GPIO PC9, 5V-tolerant, can function as MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, LCD_G3, SDMMC1_D1, DCMI_D3, LCD_B2, or EVENTOUT.
142 PA8 bidirectional GPIO PA8, 5V-tolerant, can function as MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF, CAN3_RX, UART7_RX, LCD_B3, LCD_R6, or EVENTOUT.
143 PA9 bidirectional GPIO PA9, 5V-tolerant with VBUS sensing for OTG_FS, can function as TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, DCMI_D0, LCD_R5, or EVENTOUT.
144 PA10 bidirectional GPIO PA10, 5V-tolerant, can function as TIM1_CH3, USART1_RX, LCD_B4, OTG_FS_ID, MDIOS_MDIO, DCMI_D1, LCD_B1, or EVENTOUT.
145 PA11 bidirectional GPIO PA11, 5V-tolerant, can function as TIM1_CH4, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, CAN1_RX, OTG_FS_DM, LCD_R4, or EVENTOUT.
146 PA12 bidirectional GPIO PA12, 5V-tolerant, can function as TIM1_ETR, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP, LCD_R5, or EVENTOUT.
147 PA13 bidirectional
148 VCAP_2 power_in Voltage regulator bypass capacitor pin, requires external capacitor for internal regulator.
149 VSS power_in Ground (GND) pin.
150 VDD power_in Main power supply pin, 1.7V to 3.6V.
151 PH13 bidirectional GPIO PH13, 5V-tolerant, can function as TIM8_CH1N, UART4_TX, CAN1_TX, FMC_D21, LCD_G2, or EVENTOUT.
152 PH14 bidirectional GPIO PH14, 5V-tolerant, can function as TIM8_CH2N, UART4_RX, CAN1_RX, FMC_D22, DCMI_D4, LCD_G3, or EVENTOUT.
153 PH15 bidirectional GPIO PH15, 5V-tolerant, can function as TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4, or EVENTOUT.
154 PI0 bidirectional GPIO PI0, 5V-tolerant, can function as TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5, or EVENTOUT.
155 PI1 bidirectional GPIO PI1, 5V-tolerant, can function as TIM8_BKIN2, SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6, or EVENTOUT.
156 PI2 bidirectional GPIO PI2, 5V-tolerant, can function as TIM8_CH4, SPI2_MISO, FMC_D26, DCMI_D9, LCD_G7, or EVENTOUT.
157 PI3 bidirectional GPIO PI3, 5V-tolerant, can function as TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10, or EVENTOUT.
158 VDD power_in Main power supply pin, 1.7V to 3.6V.
159 PA14 bidirectional
160 PA15 bidirectional
161 PC10 bidirectional GPIO PC10, 5V-tolerant, can function as DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2, DCMI_D8, LCD_R2, or EVENTOUT.
162 PC11 bidirectional GPIO PC11, 5V-tolerant, can function as DFSDM1_DATIN5, SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3, DCMI_D4, or EVENTOUT.
163 PC12 bidirectional GPIO PC12, 5V-tolerant, can function as TRACED3, SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDMMC1_CK, DCMI_D9, or EVENTOUT.
164 PD0 bidirectional GPIO PD0, 5V-tolerant, can function as DFSDM1_CKIN6, DFSDM1_DATIN7, UART4_RX, CAN1_RX, FMC_D2, or EVENTOUT.
165 PD1 bidirectional GPIO PD1, 5V-tolerant, can function as DFSDM1_DATIN6, DFSDM1_CKIN7, UART4_TX, CAN1_TX, FMC_D3, or EVENTOUT.
166 PD2 bidirectional GPIO PD2, 5V-tolerant, can function as TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD, DCMI_D11, or EVENTOUT.
167 PD3 bidirectional GPIO PD3, 5V-tolerant, can function as DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, DFSDM1_DATIN0, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, or EVENTOUT.
168 PD4 bidirectional GPIO PD4, 5V-tolerant, can function as DFSDM1_CKIN0, USART2_RTS, FMC_NOE, or EVENTOUT.
169 PD5 bidirectional GPIO PD5, 5V-tolerant, can function as USART2_TX, FMC_NWE, or EVENTOUT.
170 VSS power_in Ground (GND) pin.
171 VDDSDMMC power_in Dedicated power supply for SD/MMC interfaces.
172 PD6 bidirectional GPIO PD6, 5V-tolerant, can function as DFSDM1_CKIN4, SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, DFSDM1_DATIN1, SDMMC2_CK, FMC_NWAIT, DCMI_D10, LCD_B2, or EVENTOUT.
173 PD7 bidirectional GPIO PD7, 5V-tolerant, can function as DFSDM1_DATIN4, SPI1_MOSI/I2S1_SD, DFSDM1_CKIN1, USART2_CK, SPDIF_RX0, SDMMC2_CMD, FMC_NE1, or EVENTOUT.
174 PJ12 bidirectional
175 PJ13 bidirectional
176 PJ14 bidirectional
177 PJ15 bidirectional
178 PG9 bidirectional GPIO PG9, 5V-tolerant, can function as SPI1_MISO, SPDIF_RX3, USART6_RX, QUADSPI_BK2_IO2, SAI2_FS_B, SDMMC2_D0, FMC_NE2/NCE, DCMI_VSYNC, or EVENTOUT.
179 PG10 bidirectional GPIO PG10, 5V-tolerant, can function as SPI1_NSS/I2S1_WS, LCD_G3, SAI2_SD_B, SDMMC2_D1, FMC_NE3, DCMI_D2, LCD_B2, or EVENTOUT.
180 PG11 bidirectional GPIO PG11, 5V-tolerant, can function as SPI1_SCK/I2S1_CK, SPDIF_RX0, SDMMC2_D2, ETH_MII_TX_EN/RMII_TX_EN, DCMI_D3, LCD_B3, or EVENTOUT.
181 PG12 bidirectional GPIO PG12, 5V-tolerant, can function as LPTIM1_IN1, SPI6_MISO, SPDIF_RX1, USART6_RTS, LCD_B4, SDMMC2_D3, FMC_NE4, LCD_B1, or EVENTOUT.
182 PG13 bidirectional GPIO PG13, 5V-tolerant, can function as TRACED0, LPTIM1_OUT, SPI6_SCK, USART6_CTS, ETH_MII_TXD0/RMII_TXD0, FMC_A24, LCD_R0, or EVENTOUT.
183 PG14 bidirectional GPIO PG14, 5V-tolerant, can function as TRACED1, LPTIM1_ETR, SPI6_MOSI, USART6_TX, QUADSPI_BK2_IO3, ETH_MII_TXD1/RMII_TXD1, FMC_A25, LCD_B0, or EVENTOUT.
184 VSS power_in Ground (GND) pin.
185 VDD power_in Main power supply pin, 1.7V to 3.6V.
186 PK3 bidirectional GPIO PK3, 5V-tolerant, can function as LCD_B4 or EVENTOUT.
187 PK4 bidirectional GPIO PK4, 5V-tolerant, can function as LCD_B5 or EVENTOUT.
188 PK5 bidirectional GPIO PK5, 5V-tolerant, can function as LCD_B6 or EVENTOUT.
189 PK6 bidirectional GPIO PK6, 5V-tolerant, can function as LCD_B7 or EVENTOUT.
190 PK7 bidirectional GPIO PK7, 5V-tolerant, can function as LCD_DE or EVENTOUT.
191 PG15 bidirectional GPIO PG15, 5V-tolerant, can function as USART6_CTS, FMC_SDNCAS, DCMI_D13, or EVENTOUT.
192 PB3 bidirectional
193 PB4 bidirectional
194 PB5 bidirectional GPIO PB5, 5V-tolerant, can function as UART5_RX, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, SPI6_MOSI, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, LCD_G7, or EVENTOUT.
195 PB6 bidirectional GPIO PB6, 5V-tolerant, can function as UART5_TX, TIM4_CH1, HDMI_CEC, I2C1_SCL, DFSDM1_DATIN5, USART1_TX, CAN2_TX, QUADSPI_BK1_NCS, I2C4_SCL, FMC_SDNE1, DCMI_D5, or EVENTOUT.
196 PB7 bidirectional GPIO PB7, 5V-tolerant, can function as TIM4_CH2, I2C1_SDA, DFSDM1_CKIN5, USART1_RX, I2C4_SDA, FMC_NL, DCMI_VSYNC, or EVENTOUT.
197 BOOT0 input
198 PB8 bidirectional
199 PB9 bidirectional
200 PE0 bidirectional GPIO PE0, 5V-tolerant, can function as TIM4_ETR, LPTIM1_ETR, UART8_RX, SAI2_MCLK_A, FMC_NBL0, DCMI_D2, or EVENTOUT.
201 PE1 bidirectional GPIO PE1, 5V-tolerant, can function as LPTIM1_IN2, UART8_TX, FMC_NBL1, DCMI_D3, or EVENTOUT.
202 VSS power_in Ground (GND) pin.
203 PDR_ON input
204 VDD power_in Main power supply pin, 1.7V to 3.6V.
205 PI4 bidirectional GPIO PI4, 5V-tolerant, can function as TIM8_BKIN, SAI2_MCLK_A, FMC_NBL2, DCMI_D5, LCD_B4, or EVENTOUT.
206 PI5 bidirectional GPIO PI5, 5V-tolerant, can function as TIM8_CH1, SAI2_SCK_A, FMC_NBL3, DCMI_VSYNC, LCD_B5, or EVENTOUT.
207 PI6 bidirectional GPIO PI6, 5V-tolerant, can function as TIM8_CH2, SAI2_SD_A, FMC_D28, DCMI_D6, LCD_B6, or EVENTOUT.
208 PI7 bidirectional GPIO PI7, 5V-tolerant, can function as TIM8_CH3, SAI2_FS_A, FMC_D29, DCMI_D7, LCD_B7, or EVENTOUT.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-208(28x28)
Category Embedded Processors & Controllers
Pins 208

CAD (KiCad official)

  • Symbol: STM32F767BIT6
  • Footprint: Package_QFP:LQFP-208_28x28mm_P0.5mm
  • 3D model: LQFP-208(28x28) (KiCad packages3D, STEP)
  • 3D model files: stm32f767bit6-etched.step / stm32f767bit6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f767bit6.step / stm32f767bit6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (256 pp, sha256 3d2a3b76d5ba156e, retrieved 2026-09-24, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF