3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F745IGT6
STMicroelectronics · ST Microelectronics · LQFP-176(24x24)
STM32F745IGT6 from STMicroelectronics, in a LQFP-176(24x24). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3 and FMC_A23. |
| 2 | PE3 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED0, SAI1_SD_B and FMC_A19. |
| 3 | PE4 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20 and DCMI_D4. |
| 4 | PE5 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A and FMC_A21. |
| 5 | PE6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED3, TIM1_BKIN2, SPI4_MOSI, SAI1_SD_A and FMC_A22. |
| 6 | VBAT | power_in | Backup domain supply for RTC, backup registers and backup SRAM; operating range 1.65 to 3.6 V. |
| 7 | PI8 | bidirectional | Supplied through the power switch; output use limited to 2 MHz at 30 pF max and must not source current. Alternate function EVENTOUT, also WKUP5 and RTC_TAMP2/RTC_TS. |
| 8 | PC13 | bidirectional | Supplied through the power switch (3 mA sink limit); must not be used as a current source. Also RTC_TAMP1/RTC_TS/RTC_OUT and WKUP4. |
| 9 | PC14-OSC32_IN | bidirectional | Supplied through the power switch (3 mA sink limit); used as OSC32_IN oscillator pin in oscillator mode. |
| 10 | PC15-OSC32_OUT | bidirectional | Supplied through the power switch (3 mA sink limit); used as OSC32_OUT oscillator pin in oscillator mode. |
| 11 | PI9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include CAN1_RX, FMC_D30 and LCD_VSYNC. |
| 12 | PI10 | bidirectional | 5 V tolerant I/O (FT); alternate functions include ETH_MII_RX_ER, FMC_D31 and LCD_HSYNC. |
| 13 | PI11 | bidirectional | 5 V tolerant I/O (FT); alternate function OTG_HS_ULPI_DIR, also WKUP6. |
| 14 | VSS | power_in | Ground supply pin. |
| 15 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 16 | PF0 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C2_SDA and FMC_A0. |
| 17 | PF1 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C2_SCL and FMC_A1. |
| 18 | PF2 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C2_SMBA and FMC_A2. |
| 19 | PF3 | bidirectional | 5 V tolerant I/O (FT); alternate function FMC_A3, analog input ADC3_IN9. |
| 20 | PF4 | bidirectional | 5 V tolerant I/O (FT); alternate function FMC_A4, analog input ADC3_IN14. |
| 21 | PF5 | bidirectional | 5 V tolerant I/O (FT); alternate function FMC_A5, analog input ADC3_IN15. |
| 22 | VSS | power_in | Ground supply pin. |
| 23 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 24 | PF6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM10_CH1, SPI5_NSS and QUADSPI_BK1_IO3; analog input ADC3_IN4. |
| 25 | PF7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM11_CH1, SPI5_SCK and QUADSPI_BK1_IO2; analog input ADC3_IN5. |
| 26 | PF8 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI5_MISO, TIM13_CH1 and QUADSPI_BK1_IO0; analog input ADC3_IN6. |
| 27 | PF9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI5_MOSI, TIM14_CH1 and QUADSPI_BK1_IO1; analog input ADC3_IN7. |
| 28 | PF10 | bidirectional | 5 V tolerant I/O (FT); alternate functions include DCMI_D11 and LCD_DE; analog input ADC3_IN8. |
| 29 | PH0-OSC_IN | bidirectional | 5 V tolerant I/O (FT except in oscillator mode); used as OSC_IN external oscillator input. |
| 30 | PH1-OSC_OUT | bidirectional | 5 V tolerant I/O (FT except in oscillator mode); used as OSC_OUT external oscillator output. |
| 31 | NRST | bidirectional | Bidirectional reset pin with weak pull-up resistor. |
| 32 | PC0 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SAI2_FS_B, OTG_HS_ULPI_STP and FMC_SDNWE; analog input ADC123_IN10. |
| 33 | PC1 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED0, SPI2_MOSI/I2S2_SD and ETH_MDC; analog input ADC123_IN11, also RTC_TAMP3 and WKUP3. |
| 34 | PC2 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI2_MISO, OTG_HS_ULPI_DIR and FMC_SDNE0; analog input ADC123_IN12. |
| 35 | PC3 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT and FMC_SDCKE0; analog input ADC123_IN13. |
| 36 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 37 | VSSA | power_in | Analog ground pin for the ADC, DAC and reference. |
| 38 | VREF+ | power_in | Positive reference voltage input for the ADC and DAC. |
| 39 | VDDA | power_in | Analog supply pin; must be the same potential as VDD (1.7 to 3.6 V depending on ADC sample rate). |
| 40 | PA0-WKUP | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM2_CH1, TIM5_CH1, USART2_CTS and ETH_MII_CRS; analog input ADC123_IN0 and WKUP1. |
| 41 | PA1 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM2_CH2, TIM5_CH2, USART2_RTS and UART4_RX; analog input ADC123_IN1. |
| 42 | PA2 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM2_CH3, TIM9_CH1, USART2_TX and ETH_MDIO; analog input ADC123_IN2 and WKUP2. |
| 43 | PH2 | bidirectional | 5 V tolerant I/O (FT); alternate functions include LPTIM1_IN2, QUADSPI_BK2_IO0, SAI2_SCK_B and FMC_SDCKE0. |
| 44 | PH3 | bidirectional | 5 V tolerant I/O (FT); alternate functions include QUADSPI_BK2_IO1, SAI2_MCK_B, ETH_MII_COL and FMC_SDNE0. |
| 45 | PH4 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C2_SCL and OTG_HS_ULPI_NXT. |
| 46 | PH5 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C2_SDA, SPI5_NSS and FMC_SDNWE. |
| 47 | PA3 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX and OTG_HS_ULPI_D0; analog input ADC123_IN3. |
| 48 | BYPASS_REG | input | Regulator bypass control input; 5 V tolerant (FT) and must be tied to VSS or VDD according to the regulator mode. |
| 49 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 50 | PA4 | bidirectional | 3.3 V tolerant I/O (TTa) connected to ADC; alternate functions include SPI1_NSS/I2S1_WS, USART2_CK and DCMI_HSYNC; analog ADC12_IN4 and DAC_OUT1. |
| 51 | PA5 | bidirectional | 3.3 V tolerant I/O (TTa) connected to ADC; alternate functions include TIM2_CH1, TIM8_CH1N, SPI1_SCK/I2S1_CK and OTG_HS_ULPI_CK; analog ADC12_IN5 and DAC_OUT2. |
| 52 | PA6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO and DCMI_PIXCLK; analog input ADC12_IN6. |
| 53 | PA7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SD and FMC_SDNWE; analog input ADC12_IN7. |
| 54 | PC4 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2S1_MCK, SPDIFRX_IN2 and FMC_SDNE0; analog input ADC12_IN14. |
| 55 | PC5 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPDIFRX_IN3 and FMC_SDCKE0; analog input ADC12_IN15. |
| 56 | PB0 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH2N, TIM3_CH3, UART4_CTS and OTG_HS_ULPI_D1; analog input ADC12_IN8. |
| 57 | PB1 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH3N, TIM3_CH4, LCD_R6 and OTG_HS_ULPI_D2; analog input ADC12_IN9. |
| 58 | PB2 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SAI1_SD_A, SPI3_MOSI/I2S3_SD and QUADSPI_CLK. |
| 59 | PF11 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI5_MOSI, SAI2_SD_B, FMC_SDNRAS and DCMI_D12. |
| 60 | PF12 | bidirectional | 5 V tolerant I/O (FT); alternate function FMC_A6. |
| 61 | VSS | power_in | Ground supply pin. |
| 62 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 63 | PF13 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C4_SMBA and FMC_A7. |
| 64 | PF14 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C4_SCL and FMC_A8. |
| 65 | PF15 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C4_SDA and FMC_A9. |
| 66 | PG0 | bidirectional | 5 V tolerant I/O (FT); alternate function FMC_A10. |
| 67 | PG1 | bidirectional | 5 V tolerant I/O (FT); alternate function FMC_A11. |
| 68 | PE7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_ETR, UART7_Rx, QUADSPI_BK2_IO0 and FMC_D4. |
| 69 | PE8 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH1N, UART7_Tx, QUADSPI_BK2_IO1 and FMC_D5. |
| 70 | PE9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH1, UART7_RTS, QUADSPI_BK2_IO2 and FMC_D6. |
| 71 | VSS | power_in | Ground supply pin. |
| 72 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 73 | PE10 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH2N, UART7_CTS, QUADSPI_BK2_IO3 and FMC_D7. |
| 74 | PE11 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH2, SPI4_NSS, SAI2_SD_B, FMC_D8 and LCD_G3. |
| 75 | PE12 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH3N, SPI4_SCK, SAI2_SCK_B, FMC_D9 and LCD_B4. |
| 76 | PE13 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH3, SPI4_MISO, SAI2_FS_B, FMC_D10 and LCD_DE. |
| 77 | PE14 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11 and LCD_CLK. |
| 78 | PE15 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_BKIN, FMC_D12 and LCD_R7. |
| 79 | PB10 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX and ETH_MII_RX_ER. |
| 80 | PB11 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4 and ETH_MII_TX_EN. |
| 81 | VCAP_1 | power_in | Connection for the internal 1.2 V regulator output; requires a 2.2 µF external capacitor when the regulator is ON. |
| 82 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 83 | PH6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2 and FMC_SDNE1. |
| 84 | PH7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C3_SCL, SPI5_MISO, ETH_MII_RXD3 and FMC_SDCKE1. |
| 85 | PH8 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C3_SDA, FMC_D16, DCMI_HSYNC and LCD_R2. |
| 86 | PH9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C3_SMBA, TIM12_CH2, FMC_D17 and DCMI_D0. |
| 87 | PH10 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM5_CH1, I2C4_SMBA, FMC_D18 and DCMI_D1. |
| 88 | PH11 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM5_CH2, I2C4_SCL, FMC_D19 and DCMI_D2. |
| 89 | PH12 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM5_CH3, I2C4_SDA, FMC_D20 and DCMI_D3. |
| 90 | VSS | power_in | Ground supply pin. |
| 91 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 92 | PB12 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX and OTG_HS_ID. |
| 93 | PB13 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX and OTG_HS_ULPI_D6; also OTG_HS_VBUS. |
| 94 | PB14 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH2N, TIM8_CH2N, SPI2_MISO, USART3_RTS and OTG_HS_DM. |
| 95 | PB15 | bidirectional | 5 V tolerant I/O (FT); alternate functions include RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD and OTG_HS_DP. |
| 96 | PD8 | bidirectional | 5 V tolerant I/O (FT); alternate functions include USART3_TX, SPDIFRX_IN11 and FMC_D13. |
| 97 | PD9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include USART3_RX and FMC_D14. |
| 98 | PD10 | bidirectional | 5 V tolerant I/O (FT); alternate functions include USART3_CK, FMC_D15 and LCD_B3. |
| 99 | PD11 | bidirectional | 5 V tolerant I/O (FT); alternate functions include I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A and FMC_A16/FMC_CLE. |
| 100 | PD12 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM4_CH1, LPTIM1_IN1, I2C4_SCL, USART3_RTS and FMC_A17/FMC_ALE. |
| 101 | PD13 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM4_CH2, LPTIM1_OUT, I2C4_SDA, QUADSPI_BK1_IO3 and FMC_A18. |
| 102 | VSS | power_in | Ground supply pin. |
| 103 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 104 | PD14 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM4_CH3, UART8_CTS and FMC_D0. |
| 105 | PD15 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM4_CH4, UART8_RTS and FMC_D1. |
| 106 | PG2 | bidirectional | 5 V tolerant I/O (FT); alternate function FMC_A12. |
| 107 | PG3 | bidirectional | 5 V tolerant I/O (FT); alternate function FMC_A13. |
| 108 | PG4 | bidirectional | 5 V tolerant I/O (FT); alternate functions FMC_A14/FMC_BA0. |
| 109 | PG5 | bidirectional | 5 V tolerant I/O (FT); alternate functions FMC_A15/FMC_BA1. |
| 110 | PG6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include DCMI_D12 and LCD_R7. |
| 111 | PG7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include USART6_CK, FMC_INT, DCMI_D13 and LCD_CLK. |
| 112 | PG8 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI6_NSS, SPDIFRX_IN2, USART6_RTS, ETH_PPS_OUT and FMC_SDCLK. |
| 113 | VSS | power_in | Ground supply pin. |
| 114 | VDDUSB | power_in | USB transceiver supply; 3.0 to 3.6 V when USB is used (1.7 to 3.6 V if USB is not used). |
| 115 | PC6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDMMC1_D6 and DCMI_D0. |
| 116 | PC7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC1_D7 and DCMI_D1. |
| 117 | PC8 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED1, TIM3_CH3, TIM8_CH3, USART6_CK, SDMMC1_D0 and DCMI_D2. |
| 118 | PC9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, SDMMC1_D1 and DCMI_D3. |
| 119 | PA8 | bidirectional | 5 V tolerant I/O (FT); alternate functions include MCO1, TIM1_CH1, I2C3_SCL, USART1_CK and OTG_FS_SOF. |
| 120 | PA9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX and DCMI_D0; also OTG_FS_VBUS. |
| 121 | PA10 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH3, USART1_RX, OTG_FS_ID and DCMI_D1. |
| 122 | PA11 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_CH4, USART1_CTS, CAN1_RX, OTG_FS_DM and LCD_R4. |
| 123 | PA12 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM1_ETR, USART1_RTS, SAI2_FS_B, CAN1_TX and OTG_FS_DP. |
| 124 | PA13 | bidirectional | 5 V tolerant I/O (FT); default function JTMS-SWDIO, used for SWD debug data. |
| 125 | VCAP_2 | power_in | Connection for the internal 1.2 V regulator output; requires a 2.2 µF external capacitor when the regulator is ON. |
| 126 | VSS | power_in | Ground supply pin. |
| 127 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 128 | PH13 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_CH1N, CAN1_TX, FMC_D21 and LCD_G2. |
| 129 | PH14 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_CH2N, FMC_D22, DCMI_D4 and LCD_G3. |
| 130 | PH15 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_CH3N, FMC_D23, DCMI_D11 and LCD_G4. |
| 131 | PI0 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24 and DCMI_D13. |
| 132 | PI1 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_BKIN2, SPI2_SCK/I2S2_CK, FMC_D25 and DCMI_D8. |
| 133 | PI2 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_CH4, SPI2_MISO, FMC_D26 and DCMI_D9. |
| 134 | PI3 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27 and DCMI_D10. |
| 135 | VSS | power_in | Ground supply pin. |
| 136 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 137 | PA14 | bidirectional | 5 V tolerant I/O (FT); default function JTCK-SWCLK, used for SWD debug clock. |
| 138 | PA15 | bidirectional | 5 V tolerant I/O (FT); default function JTDI; alternates include TIM2_CH1, HDMI-CEC, SPI1_NSS/I2S1_WS and SPI3_NSS/I2S3_WS. |
| 139 | PC10 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1 and SDMMC1_D2. |
| 140 | PC11 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS and SDMMC1_D3. |
| 141 | PC12 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED3, SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX and SDMMC1_CK. |
| 142 | PD0 | bidirectional | 5 V tolerant I/O (FT); alternate functions include CAN1_RX and FMC_D2. |
| 143 | PD1 | bidirectional | 5 V tolerant I/O (FT); alternate functions include CAN1_TX and FMC_D3. |
| 144 | PD2 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD and DCMI_D11. |
| 145 | PD3 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5 and LCD_G7. |
| 146 | PD4 | bidirectional | 5 V tolerant I/O (FT); alternate functions include USART2_RTS, FMC_NOE. |
| 147 | PD5 | bidirectional | 5 V tolerant I/O (FT); alternate functions include USART2_TX and FMC_NWE. |
| 148 | VSS | power_in | Ground supply pin. |
| 149 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 150 | PD6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT and DCMI_D10. |
| 151 | PD7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include USART2_CK, SPDIFRX_IN0 and FMC_NE1. |
| 152 | PG9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPDIFRX_IN3, USART6_RX, QUADSPI_BK2_IO2, SAI2_FS_B and FMC_NE2/FMC_NCE. |
| 153 | PG10 | bidirectional | 5 V tolerant I/O (FT); alternate functions include LCD_G3, SAI2_SD_B, FMC_NE3 and DCMI_D2. |
| 154 | PG11 | bidirectional | 5 V tolerant I/O (FT); alternate functions include SPDIFRX_IN0, ETH_MII_TX_EN and DCMI_D3. |
| 155 | PG12 | bidirectional | 5 V tolerant I/O (FT); alternate functions include LPTIM1_IN1, SPI6_MISO, SPDIFRX_IN1, USART6_RTS and FMC_NE4. |
| 156 | PG13 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED0, LPTIM1_OUT, SPI6_SCK, USART6_CTS, ETH_MII_TXD0 and FMC_A24. |
| 157 | PG14 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TRACED1, LPTIM1_ETR, SPI6_MOSI, USART6_TX, QUADSPI_BK2_IO3 and FMC_A25. |
| 158 | VSS | power_in | Ground supply pin. |
| 159 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 160 | PG15 | bidirectional | 5 V tolerant I/O (FT); alternate functions include USART6_CTS, FMC_SDNCAS and DCMI_D13. |
| 161 | PB3 | bidirectional | 5 V tolerant I/O (FT); default function JTDO/TRACESWO; alternates include TIM2_CH2, SPI1_SCK/I2S1_CK and SPI3_SCK/I2S3_CK. |
| 162 | PB4 | bidirectional | 5 V tolerant I/O (FT); default function NJTRST; alternates include TIM3_CH1, SPI1_MISO, SPI3_MISO and SPI2_NSS/I2S2_WS. |
| 163 | PB5 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, CAN2_RX, FMC_SDCKE1 and DCMI_D10. |
| 164 | PB6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM4_CH1, HDMI-CEC, I2C1_SCL, USART1_TX, CAN2_TX and FMC_SDNE1. |
| 165 | PB7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL and DCMI_VSYNC. |
| 166 | BOOT0 | input | Dedicated boot mode selection pin; up to 9.0 V allowed on BOOT input, also VPP. |
| 167 | PB8 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, SDMMC1_D4 and DCMI_D6. |
| 168 | PB9 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX and SDMMC1_D5. |
| 169 | PE0 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM4_ETR, LPTIM1_ETR, UART8_Rx, SAI2_MCK_A, FMC_NBL0 and DCMI_D2. |
| 170 | PE1 | bidirectional | 5 V tolerant I/O (FT); alternate functions include LPTIM1_IN2, UART8_Tx, FMC_NBL1 and DCMI_D3. |
| 171 | PDR_ON | power_in | Power-down reset enable pin; connect to VDD to keep the PDR active, or tie as described in section 3.17. |
| 172 | VDD | power_in | Main supply pin; standard operating voltage 1.7 to 3.6 V. |
| 173 | PI4 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_BKIN, SAI2_MCK_A, FMC_NBL2, DCMI_D5 and LCD_B4. |
| 174 | PI5 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_CH1, SAI2_SCK_A, FMC_NBL3, DCMI_VSYNC and LCD_B5. |
| 175 | PI6 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_CH2, SAI2_SD_A, FMC_D28, DCMI_D6 and LCD_B6. |
| 176 | PI7 | bidirectional | 5 V tolerant I/O (FT); alternate functions include TIM8_CH3, SAI2_FS_A, FMC_D29, DCMI_D7 and LCD_B7. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-176(24x24) |
| Category | Embedded Processors & Controllers |
| Pins | 176 |
CAD (KiCad official)
- Symbol:
STM32F745IGT6 - Footprint:
Package_QFP:LQFP-176_24x24mm_P0.5mm - 3D model: LQFP-176(24x24) (KiCad packages3D, STEP)
- 3D model files:
stm32f745igt6-etched.step/stm32f745igt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f745igt6.step/stm32f745igt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (230 pp, sha256
23a9ec5dfd13ea2e, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).