main
Ray
Publish 0.1.0
0e9207b
STM32F730V8T6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F730V8T6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, QUADSPI_BK1_IO2, FMC_A23, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED3, TIM1_BKIN2, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCK_B, FMC_A22, EVENTOUT. |
| 6 | VBAT | power_in | Backup-domain supply for the RTC, 32x32-bit backup registers and 4 Kbytes of backup SRAM. |
| 7 | PC13 | bidirectional | 5 V-tolerant I/O supplied through the power switch with 3 mA sink limit (output speed max 2 MHz at 30 pF; must not source current such as an LED); additional functions RTC_TAMP1/RTC_TS/RTC_OUT, WKUP4. |
| 8 | PC14-OSC32_IN | bidirectional | 5 V-tolerant I/O supplied through the power switch (3 mA limit, output max 2 MHz at 30 pF); function OSC32_IN for the 32 kHz oscillator. |
| 9 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant I/O supplied through the power switch (3 mA limit, output max 2 MHz at 30 pF); function OSC32_OUT for the 32 kHz oscillator. |
| 10 | VSS | power_in | Ground pin of the digital supply domain. |
| 11 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | 5 V-tolerant I/O (FT except in oscillator mode); function OSC_IN for the 4-26 MHz crystal oscillator. |
| 13 | PH1-OSC_OUT | bidirectional | 5 V-tolerant I/O (FT except in oscillator mode); function OSC_OUT for the 4-26 MHz crystal oscillator. |
| 14 | NRST | bidirectional | Bidirectional reset pin with weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT; additional functions ADC1_IN10, ADC2_IN10, ADC3_IN10. ULPI signals are not available when the USB HS PHY is used. |
| 16 | PC1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED0, SPI2_MOSI/I2S2_SD, SAI1_SD_A, EVENTOUT; additional functions ADC1_IN11, ADC2_IN11, ADC3_IN11, RTC_TAMP3, WKUP3. |
| 17 | PC2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, FMC_SDNE0, EVENTOUT; additional functions ADC1_IN12, ADC2_IN12, ADC3_IN12. ULPI signals are not available when the USB HS PHY is used. |
| 18 | PC3 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, FMC_SDCKE0, EVENTOUT; additional functions ADC1_IN13, ADC2_IN13, ADC3_IN13. ULPI signals are not available when the USB HS PHY is used. |
| 19 | VSSA | power_in | Analog ground pin. |
| 20 | VREF+ | power_in | Positive reference voltage pin for the analog converters. |
| 21 | VDDA | power_in | Analog supply pin. |
| 22 | PA0-WKUP | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B, EVENTOUT; additional functions ADC1_IN0, ADC2_IN0, ADC3_IN0, WKUP1. If the device is in regulator OFF/internal reset ON mode, PA0 is used as the internal reset (active low). |
| 23 | PA1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCK_B, EVENTOUT; additional functions ADC1_IN1, ADC2_IN1, ADC3_IN1. |
| 24 | PA2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B, EVENTOUT; additional functions ADC1_IN2, ADC2_IN2, ADC3_IN2, WKUP2. |
| 25 | PA3 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, EVENTOUT; additional functions ADC1_IN3, ADC2_IN3, ADC3_IN3. ULPI signals are not available when the USB HS PHY is used. |
| 26 | VSS | power_in | Ground pin of the digital supply domain. |
| 27 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
| 28 | PA4 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, EVENTOUT; additional functions ADC1_IN4, ADC2_IN4, DAC_OUT1. |
| 29 | PA5 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, OTG_HS_ULPI_CK, EVENTOUT; additional functions ADC1_IN5, ADC2_IN5, DAC_OUT2. |
| 30 | PA6 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, EVENTOUT; additional functions ADC1_IN6, ADC2_IN6. |
| 31 | PA7 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, TIM14_CH1, FMC_SDNWE, EVENTOUT; additional functions ADC1_IN7, ADC2_IN7. |
| 32 | PC4 | bidirectional | 5 V-tolerant I/O (FT); alternate functions I2S1_MCK, FMC_SDNE0, EVENTOUT; additional functions ADC1_IN14, ADC2_IN14. |
| 33 | PC5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions FMC_SDCKE0, EVENTOUT; additional functions ADC1_IN15, ADC2_IN15. |
| 34 | PB0 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, UART4_CTS, OTG_HS_ULPI_D1, EVENTOUT; additional functions ADC1_IN8, ADC2_IN8. ULPI signals are not available when the USB HS PHY is used. |
| 35 | PB1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, EVENTOUT; additional functions ADC1_IN9, ADC2_IN9. ULPI signals are not available when the USB HS PHY is used. |
| 36 | PB2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SAI1_SD_A, SPI3_MOSI/I2S3_SD, QUADSPI_CLK, EVENTOUT. |
| 37 | PE7 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_ETR, UART7_Rx, QUADSPI_BK2_IO0, FMC_D4, EVENTOUT. |
| 38 | PE8 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH1N, UART7_Tx, QUADSPI_BK2_IO1, FMC_D5, EVENTOUT. |
| 39 | PE9 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH1, UART7_RTS, QUADSPI_BK2_IO2, FMC_D6, EVENTOUT. |
| 40 | PE10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2N, UART7_CTS, QUADSPI_BK2_IO3, FMC_D7, EVENTOUT. |
| 41 | PE11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2, SPI4_NSS, SAI2_SD_B, FMC_D8, EVENTOUT. |
| 42 | PE12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH3N, SPI4_SCK, SAI2_SCK_B, FMC_D9, EVENTOUT. |
| 43 | PE13 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH3, SPI4_MISO, SAI2_FS_B, FMC_D10, EVENTOUT. |
| 44 | PE14 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11, EVENTOUT. |
| 45 | PE15 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_BKIN, FMC_D12, EVENTOUT. |
| 46 | PB10 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, EVENTOUT. ULPI signals are not available when the USB HS PHY is used. |
| 47 | PB11 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, EVENTOUT. ULPI signals are not available when the USB HS PHY is used. |
| 48 | VCAP_1 | power_in | Connection to the external capacitor of the internal voltage regulator (see VCAP1/VCAP2 external capacitor section 6.3.2). |
| 49 | VSS | power_in | Ground pin of the digital supply domain. |
| 50 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
| 51 | PB12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, OTG_HS_ULPI_D5, OTG_HS_ID, EVENTOUT. ULPI signals are not available when the USB HS PHY is used. |
| 52 | PB13 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, OTG_HS_ULPI_D6, EVENTOUT; additional function OTG_HS_VBUS. ULPI signals are not available when the USB HS PHY is used. |
| 53 | PB14 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2N, TIM8_CH2N, SPI2_MISO, USART3_RTS, TIM12_CH1, SDMMC2_D0, OTG_HS_DM, EVENTOUT. |
| 54 | PB15 | bidirectional | 5 V-tolerant I/O (FT); alternate functions RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, SDMMC2_D1, OTG_HS_DP, EVENTOUT. |
| 55 | PD8 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART3_TX, FMC_D13, EVENTOUT. |
| 56 | PD9 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART3_RX, FMC_D14, EVENTOUT. |
| 57 | PD10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART3_CK, FMC_D15, EVENTOUT. |
| 58 | PD11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A, FMC_A16/FMC_CLE, EVENTOUT. |
| 59 | PD12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_CH1, LPTIM1_IN1, USART3_RTS, QUADSPI_BK1_IO1, SAI2_FS_A, FMC_A17/FMC_ALE, EVENTOUT. |
| 60 | PD13 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_CH2, LPTIM1_OUT, QUADSPI_BK1_IO3, SAI2_SCK_A, FMC_A18, EVENTOUT. |
| 61 | PD14 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_CH3, UART8_CTS, FMC_D0, EVENTOUT. |
| 62 | PD15 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_CH4, UART8_RTS, FMC_D1, EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDMMC2_D6, SDMMC1_D6, EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC2_D7, SDMMC1_D7, EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, SDMMC1_D0, EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, SDMMC1_D1, EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF, EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, EVENTOUT; additional function OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, EVENTOUT. |
| 70 | PA11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH4, USART1_CTS, CAN1_RX, OTG_FS_DM, EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_ETR, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP, EVENTOUT. |
| 72 | PA13(JTMS-SWDIO) | bidirectional | 5 V-tolerant I/O (FT); function after reset JTMS-SWDIO (SWD debug data line). |
| 73 | VCAP_2 | power_in | Connection to the external capacitor of the internal voltage regulator (see VCAP1/VCAP2 external capacitor section 6.3.2). |
| 74 | VSS | power_in | Ground pin of the digital supply domain. |
| 75 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
| 76 | PA14 (JTCK-SWCLK) | bidirectional | 5 V-tolerant I/O (FT); function after reset JTCK-SWCLK (SWD clock line). |
| 77 | PA15(JTDI) | bidirectional | 5 V-tolerant I/O (FT); alternate functions JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, UART4_RTS, EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2, EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3, EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED3, SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDMMC1_CK, EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V-tolerant I/O (FT); alternate functions CAN1_RX, FMC_D2, EVENTOUT. |
| 82 | PD1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions CAN1_TX, FMC_D3, EVENTOUT. |
| 83 | PD2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD, EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART2_RTS, FMC_NOE, EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART2_TX, FMC_NWE, EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, SDMMC2_CK, FMC_NWAIT, EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART2_CK, SDMMC2_CMD, FMC_NE1, EVENTOUT. |
| 89 | PB3 (JTDO/TRACESWO) | bidirectional | 5 V-tolerant I/O (FT); alternate functions JTDO/TRACESWO, TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2, EVENTOUT. |
| 90 | PB4(NJTRST) | bidirectional | 5 V-tolerant I/O (FT); alternate functions NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, SPI2_NSS/I2S2_WS, SDMMC2_D3, EVENTOUT. |
| 91 | PB5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, OTG_HS_ULPI_D7, FMC_SDCKE1, EVENTOUT. ULPI signals are not available when the USB HS PHY is used. |
| 92 | PB6 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM4_CH1, I2C1_SCL, USART1_TX, QUADSPI_BK1_NCS, FMC_SDNE1, EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, EVENTOUT. |
| 94 | BOOT0 | input | Dedicated BOOT pin (type B) used for boot mode selection; additional function VPP. |
| 95 | PB8 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, SDMMC2_D4, SDMMC1_D4, EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDMMC2_D5, SDMMC1_D5, EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_ETR, LPTIM1_ETR, UART8_Rx, SAI2_MCK_A, FMC_NBL0, EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions LPTIM1_IN2, UART8_Tx, FMC_NBL1, EVENTOUT. |
| 99 | VSS | power_in | Ground pin of the digital supply domain. |
| 100 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range (application supply and I/Os) | 1.7 | 3.6 | V | Stated in the description as the 1.7 V to 3.6 V power supply; Table 16 values not in extract | 13 | ||
| Operating temperature range (industrial, ordering code 6) | -40 | 85 | °C | Ordering code suffix 6 = industrial range -40 to 85 °C; family text gives -40 to +105 °C for suffix 7 parts, which is a sibling and not used | 198 |
CAD (KiCad official)
- Symbol:
STM32F730V8T6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f730v8t6-etched.step/stm32f730v8t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f730v8t6.step/stm32f730v8t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (201 pp, sha256
e8f382b6932da1b7, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32F730V8T6
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F730V8T6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, QUADSPI_BK1_IO2, FMC_A23, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED3, TIM1_BKIN2, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, SAI2_MCK_B, FMC_A22, EVENTOUT. |
| 6 | VBAT | power_in | Backup-domain supply for the RTC, 32x32-bit backup registers and 4 Kbytes of backup SRAM. |
| 7 | PC13 | bidirectional | 5 V-tolerant I/O supplied through the power switch with 3 mA sink limit (output speed max 2 MHz at 30 pF; must not source current such as an LED); additional functions RTC_TAMP1/RTC_TS/RTC_OUT, WKUP4. |
| 8 | PC14-OSC32_IN | bidirectional | 5 V-tolerant I/O supplied through the power switch (3 mA limit, output max 2 MHz at 30 pF); function OSC32_IN for the 32 kHz oscillator. |
| 9 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant I/O supplied through the power switch (3 mA limit, output max 2 MHz at 30 pF); function OSC32_OUT for the 32 kHz oscillator. |
| 10 | VSS | power_in | Ground pin of the digital supply domain. |
| 11 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
| 12 | PH0-OSC_IN | bidirectional | 5 V-tolerant I/O (FT except in oscillator mode); function OSC_IN for the 4-26 MHz crystal oscillator. |
| 13 | PH1-OSC_OUT | bidirectional | 5 V-tolerant I/O (FT except in oscillator mode); function OSC_OUT for the 4-26 MHz crystal oscillator. |
| 14 | NRST | bidirectional | Bidirectional reset pin with weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SAI2_FS_B, OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT; additional functions ADC1_IN10, ADC2_IN10, ADC3_IN10. ULPI signals are not available when the USB HS PHY is used. |
| 16 | PC1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED0, SPI2_MOSI/I2S2_SD, SAI1_SD_A, EVENTOUT; additional functions ADC1_IN11, ADC2_IN11, ADC3_IN11, RTC_TAMP3, WKUP3. |
| 17 | PC2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI2_MISO, OTG_HS_ULPI_DIR, FMC_SDNE0, EVENTOUT; additional functions ADC1_IN12, ADC2_IN12, ADC3_IN12. ULPI signals are not available when the USB HS PHY is used. |
| 18 | PC3 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, FMC_SDCKE0, EVENTOUT; additional functions ADC1_IN13, ADC2_IN13, ADC3_IN13. ULPI signals are not available when the USB HS PHY is used. |
| 19 | VSSA | power_in | Analog ground pin. |
| 20 | VREF+ | power_in | Positive reference voltage pin for the analog converters. |
| 21 | VDDA | power_in | Analog supply pin. |
| 22 | PA0-WKUP | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, SAI2_SD_B, EVENTOUT; additional functions ADC1_IN0, ADC2_IN0, ADC3_IN0, WKUP1. If the device is in regulator OFF/internal reset ON mode, PA0 is used as the internal reset (active low). |
| 23 | PA1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3, SAI2_MCK_B, EVENTOUT; additional functions ADC1_IN1, ADC2_IN1, ADC3_IN1. |
| 24 | PA2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, SAI2_SCK_B, EVENTOUT; additional functions ADC1_IN2, ADC2_IN2, ADC3_IN2, WKUP2. |
| 25 | PA3 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, EVENTOUT; additional functions ADC1_IN3, ADC2_IN3, ADC3_IN3. ULPI signals are not available when the USB HS PHY is used. |
| 26 | VSS | power_in | Ground pin of the digital supply domain. |
| 27 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
| 28 | PA4 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, EVENTOUT; additional functions ADC1_IN4, ADC2_IN4, DAC_OUT1. |
| 29 | PA5 | bidirectional | 3.3 V tolerant I/O directly connected to ADC (TTa); alternate functions TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK/I2S1_CK, OTG_HS_ULPI_CK, EVENTOUT; additional functions ADC1_IN5, ADC2_IN5, DAC_OUT2. |
| 30 | PA6 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, EVENTOUT; additional functions ADC1_IN6, ADC2_IN6. |
| 31 | PA7 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI/I2S1_SD, TIM14_CH1, FMC_SDNWE, EVENTOUT; additional functions ADC1_IN7, ADC2_IN7. |
| 32 | PC4 | bidirectional | 5 V-tolerant I/O (FT); alternate functions I2S1_MCK, FMC_SDNE0, EVENTOUT; additional functions ADC1_IN14, ADC2_IN14. |
| 33 | PC5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions FMC_SDCKE0, EVENTOUT; additional functions ADC1_IN15, ADC2_IN15. |
| 34 | PB0 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, UART4_CTS, OTG_HS_ULPI_D1, EVENTOUT; additional functions ADC1_IN8, ADC2_IN8. ULPI signals are not available when the USB HS PHY is used. |
| 35 | PB1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, OTG_HS_ULPI_D2, EVENTOUT; additional functions ADC1_IN9, ADC2_IN9. ULPI signals are not available when the USB HS PHY is used. |
| 36 | PB2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SAI1_SD_A, SPI3_MOSI/I2S3_SD, QUADSPI_CLK, EVENTOUT. |
| 37 | PE7 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_ETR, UART7_Rx, QUADSPI_BK2_IO0, FMC_D4, EVENTOUT. |
| 38 | PE8 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH1N, UART7_Tx, QUADSPI_BK2_IO1, FMC_D5, EVENTOUT. |
| 39 | PE9 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH1, UART7_RTS, QUADSPI_BK2_IO2, FMC_D6, EVENTOUT. |
| 40 | PE10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2N, UART7_CTS, QUADSPI_BK2_IO3, FMC_D7, EVENTOUT. |
| 41 | PE11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2, SPI4_NSS, SAI2_SD_B, FMC_D8, EVENTOUT. |
| 42 | PE12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH3N, SPI4_SCK, SAI2_SCK_B, FMC_D9, EVENTOUT. |
| 43 | PE13 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH3, SPI4_MISO, SAI2_FS_B, FMC_D10, EVENTOUT. |
| 44 | PE14 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH4, SPI4_MOSI, SAI2_MCK_B, FMC_D11, EVENTOUT. |
| 45 | PE15 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_BKIN, FMC_D12, EVENTOUT. |
| 46 | PB10 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, EVENTOUT. ULPI signals are not available when the USB HS PHY is used. |
| 47 | PB11 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, EVENTOUT. ULPI signals are not available when the USB HS PHY is used. |
| 48 | VCAP_1 | power_in | Connection to the external capacitor of the internal voltage regulator (see VCAP1/VCAP2 external capacitor section 6.3.2). |
| 49 | VSS | power_in | Ground pin of the digital supply domain. |
| 50 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
| 51 | PB12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, OTG_HS_ULPI_D5, OTG_HS_ID, EVENTOUT. ULPI signals are not available when the USB HS PHY is used. |
| 52 | PB13 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, OTG_HS_ULPI_D6, EVENTOUT; additional function OTG_HS_VBUS. ULPI signals are not available when the USB HS PHY is used. |
| 53 | PB14 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2N, TIM8_CH2N, SPI2_MISO, USART3_RTS, TIM12_CH1, SDMMC2_D0, OTG_HS_DM, EVENTOUT. |
| 54 | PB15 | bidirectional | 5 V-tolerant I/O (FT); alternate functions RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, SDMMC2_D1, OTG_HS_DP, EVENTOUT. |
| 55 | PD8 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART3_TX, FMC_D13, EVENTOUT. |
| 56 | PD9 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART3_RX, FMC_D14, EVENTOUT. |
| 57 | PD10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART3_CK, FMC_D15, EVENTOUT. |
| 58 | PD11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A, FMC_A16/FMC_CLE, EVENTOUT. |
| 59 | PD12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_CH1, LPTIM1_IN1, USART3_RTS, QUADSPI_BK1_IO1, SAI2_FS_A, FMC_A17/FMC_ALE, EVENTOUT. |
| 60 | PD13 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_CH2, LPTIM1_OUT, QUADSPI_BK1_IO3, SAI2_SCK_A, FMC_A18, EVENTOUT. |
| 61 | PD14 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_CH3, UART8_CTS, FMC_D0, EVENTOUT. |
| 62 | PD15 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_CH4, UART8_RTS, FMC_D1, EVENTOUT. |
| 63 | PC6 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDMMC2_D6, SDMMC1_D6, EVENTOUT. |
| 64 | PC7 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDMMC2_D7, SDMMC1_D7, EVENTOUT. |
| 65 | PC8 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED1, TIM3_CH3, TIM8_CH3, UART5_RTS, USART6_CK, SDMMC1_D0, EVENTOUT. |
| 66 | PC9 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, UART5_CTS, QUADSPI_BK1_IO0, SDMMC1_D1, EVENTOUT. |
| 67 | PA8 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions MCO1, TIM1_CH1, TIM8_BKIN2, I2C3_SCL, USART1_CK, OTG_FS_SOF, EVENTOUT. |
| 68 | PA9 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, EVENTOUT; additional function OTG_FS_VBUS. |
| 69 | PA10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, EVENTOUT. |
| 70 | PA11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_CH4, USART1_CTS, CAN1_RX, OTG_FS_DM, EVENTOUT. |
| 71 | PA12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM1_ETR, USART1_RTS, SAI2_FS_B, CAN1_TX, OTG_FS_DP, EVENTOUT. |
| 72 | PA13(JTMS-SWDIO) | bidirectional | 5 V-tolerant I/O (FT); function after reset JTMS-SWDIO (SWD debug data line). |
| 73 | VCAP_2 | power_in | Connection to the external capacitor of the internal voltage regulator (see VCAP1/VCAP2 external capacitor section 6.3.2). |
| 74 | VSS | power_in | Ground pin of the digital supply domain. |
| 75 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
| 76 | PA14 (JTCK-SWCLK) | bidirectional | 5 V-tolerant I/O (FT); function after reset JTCK-SWCLK (SWD clock line). |
| 77 | PA15(JTDI) | bidirectional | 5 V-tolerant I/O (FT); alternate functions JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, UART4_RTS, EVENTOUT. |
| 78 | PC10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2, EVENTOUT. |
| 79 | PC11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3, EVENTOUT. |
| 80 | PC12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED3, SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDMMC1_CK, EVENTOUT. |
| 81 | PD0 | bidirectional | 5 V-tolerant I/O (FT); alternate functions CAN1_RX, FMC_D2, EVENTOUT. |
| 82 | PD1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions CAN1_TX, FMC_D3, EVENTOUT. |
| 83 | PD2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD, EVENTOUT. |
| 84 | PD3 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, EVENTOUT. |
| 85 | PD4 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART2_RTS, FMC_NOE, EVENTOUT. |
| 86 | PD5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART2_TX, FMC_NWE, EVENTOUT. |
| 87 | PD6 | bidirectional | 5 V-tolerant I/O (FT); alternate functions SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, SDMMC2_CK, FMC_NWAIT, EVENTOUT. |
| 88 | PD7 | bidirectional | 5 V-tolerant I/O (FT); alternate functions USART2_CK, SDMMC2_CMD, FMC_NE1, EVENTOUT. |
| 89 | PB3 (JTDO/TRACESWO) | bidirectional | 5 V-tolerant I/O (FT); alternate functions JTDO/TRACESWO, TIM2_CH2, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2, EVENTOUT. |
| 90 | PB4(NJTRST) | bidirectional | 5 V-tolerant I/O (FT); alternate functions NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, SPI2_NSS/I2S2_WS, SDMMC2_D3, EVENTOUT. |
| 91 | PB5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, SPI3_MOSI/I2S3_SD, OTG_HS_ULPI_D7, FMC_SDCKE1, EVENTOUT. ULPI signals are not available when the USB HS PHY is used. |
| 92 | PB6 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM4_CH1, I2C1_SCL, USART1_TX, QUADSPI_BK1_NCS, FMC_SDNE1, EVENTOUT. |
| 93 | PB7 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, EVENTOUT. |
| 94 | BOOT0 | input | Dedicated BOOT pin (type B) used for boot mode selection; additional function VPP. |
| 95 | PB8 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, SDMMC2_D4, SDMMC1_D4, EVENTOUT. |
| 96 | PB9 | bidirectional | 5 V-tolerant I/O with I2C Fm+ option (FTf); alternate functions TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDMMC2_D5, SDMMC1_D5, EVENTOUT. |
| 97 | PE0 | bidirectional | 5 V-tolerant I/O (FT); alternate functions TIM4_ETR, LPTIM1_ETR, UART8_Rx, SAI2_MCK_A, FMC_NBL0, EVENTOUT. |
| 98 | PE1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions LPTIM1_IN2, UART8_Tx, FMC_NBL1, EVENTOUT. |
| 99 | VSS | power_in | Ground pin of the digital supply domain. |
| 100 | VDD | power_in | Digital supply pin; the application supply and I/Os range from 1.7 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range (application supply and I/Os) | | 1.7 | | 3.6 | V | Stated in the description as the 1.7 V to 3.6 V power supply; Table 16 values not in extract | 13 |
| Operating temperature range (industrial, ordering code 6) | | -40 | | 85 | °C | Ordering code suffix 6 = industrial range -40 to 85 °C; family text gives -40 to +105 °C for suffix 7 parts, which is a sibling and not used | 198 |
## CAD (KiCad official)
- Symbol: `STM32F730V8T6`
- Footprint: `Package_QFP:LQFP-100_14x14mm_P0.5mm`
- 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files: `stm32f730v8t6-etched.step` / `stm32f730v8t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32f730v8t6.step` / `stm32f730v8t6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589836756595351552) (201 pp, sha256 `e8f382b6932da1b7`, retrieved 2026-11-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32f730v8t6-datasheet.pdf)