component
STM32F469VIT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
stm32f469vit6 0.1.1: pinout corrected from ST open pin data (2 pins)
1 file changed
+40−21
page.json+40−21@@ -17,7 +17,7 @@ "mpn": "STM32F469VIT6", "manufacturer": "STMicroelectronics", "package": "LQFP-100(14x14)",- "pin_count": 98,+ "pin_count": 100, "category": "Embedded Processors & Controllers", "subcategory": "Microcontrollers (MCU/MPU/SOC)", "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603155505737187328",@@ -54,6 +54,12 @@ "type": "bidirectional", "description": "GPIO Port E pin 2, alternate functions include TRACECLK, SPI4_SCK, SAI1_MCLK_A with 5V tolerant I/O structure." },+ {+ "number": "2",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply connection."+ }, { "number": "3", "name": "VBAT",@@ -68,13 +74,13 @@ }, { "number": "5",- "name": "PC14-OSC32_IN",+ "name": "PC14/OSC32_IN", "type": "bidirectional", "description": "GPIO Port C pin 14 or 32 kHz oscillator input, 5V tolerant through power switch with limited current capability." }, { "number": "6",- "name": "PC15-OSC32_OUT",+ "name": "PC15/OSC32_OUT", "type": "bidirectional", "description": "GPIO Port C pin 15 or 32 kHz oscillator output, 5V tolerant through power switch with limited current capability." },@@ -92,20 +98,20 @@ }, { "number": "9",- "name": "PH0-OSC_IN",+ "name": "PH0/OSC_IN", "type": "bidirectional", "description": "GPIO Port H pin 0 or external oscillator input for 4-26 MHz crystal, 5V tolerant." }, { "number": "10",- "name": "PH1-OSC_OUT",+ "name": "PH1/OSC_OUT", "type": "bidirectional", "description": "GPIO Port H pin 1 or external oscillator output for 4-26 MHz crystal, 5V tolerant." }, { "number": "11", "name": "NRST",- "type": "bidirectional",+ "type": "input", "description": "Active-low reset pin with internal weak pull-up resistor, resets device on low level." }, {@@ -152,7 +158,7 @@ }, { "number": "19",- "name": "PA0-WKUP",+ "name": "PA0/WKUP", "type": "bidirectional", "description": "GPIO Port A pin 0 with wakeup capability and analog channel ADC123_IN0, alternate timer/UART functions, 5V tolerant." },@@ -224,7 +230,7 @@ }, { "number": "31",- "name": "PB2-BOOT1",+ "name": "PB2/BOOT1", "type": "bidirectional", "description": "GPIO Port B pin 2 with boot selection capability, 5V tolerant, floating input after reset." },@@ -298,7 +304,7 @@ "number": "43", "name": "VCAP1", "type": "power_in",- "description": "External capacitor connection for core voltage regulator, typically 1-10 µF capacitor to ground."+ "description": "External capacitor connection for core voltage regulator, typically 1-10 \u00b5F capacitor to ground." }, { "number": "44",@@ -370,7 +376,7 @@ "number": "55", "name": "VDDDSI", "type": "power_in",- "description": "DSI host interface positive power supply for D-PHY, 1.2V ±5% regulated supply."+ "description": "DSI host interface positive power supply for D-PHY, 1.2V \u00b15% regulated supply." }, { "number": "56",@@ -488,7 +494,7 @@ }, { "number": "75",- "name": "PA13(JTMS-SWDIO)",+ "name": "PA13", "type": "bidirectional", "description": "GPIO Port A pin 13, JTAG test mode select and SWD data I/O, 5V tolerant, debug interface pin." },@@ -496,7 +502,7 @@ "number": "76", "name": "VCAP2", "type": "power_in",- "description": "External capacitor connection for PLL voltage regulator, typically 1-10 µF capacitor to ground."+ "description": "External capacitor connection for PLL voltage regulator, typically 1-10 \u00b5F capacitor to ground." }, { "number": "77",@@ -504,15 +510,21 @@ "type": "power_in", "description": "Main positive supply voltage, 1.7V to 3.6V." },+ {+ "number": "78",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground supply connection."+ }, { "number": "79",- "name": "PA14(JTCK-SWCLK)",+ "name": "PA14", "type": "bidirectional", "description": "GPIO Port A pin 14, JTAG test clock and SWD clock, 5V tolerant, debug interface pin." }, { "number": "80",- "name": "PA15(JTDI)",+ "name": "PA15", "type": "bidirectional", "description": "GPIO Port A pin 15, JTAG test data input, 5V tolerant, alternate SPI/timer functions, debug interface pin." },@@ -584,13 +596,13 @@ }, { "number": "92",- "name": "PB3(JTDO/TRACESWO)",+ "name": "PB3", "type": "bidirectional", "description": "GPIO Port B pin 3, JTAG test data output and serial wire output, 5V tolerant, debug interface pin." }, { "number": "93",- "name": "PB4(NJTRST)",+ "name": "PB4", "type": "bidirectional", "description": "GPIO Port B pin 4, JTAG test reset, 5V tolerant, alternate TIM3 and SPI functions, debug interface pin." },@@ -650,7 +662,14 @@ "total": 98, "described": 98, "cites_pages": true,- "refuses_to_fabricate": true+ "refuses_to_fabricate": true,+ "checked_against": "STM32_open_pin_data STM32F469VITx.xml"+ },+ "correction": {+ "at": "2026-09-30",+ "what": "2 of 100 pins corrected",+ "how": "pinout rebuilt from STMicroelectronics STM32_open_pin_data (STM32F469VITx.xml, LQFP100); the previous pinout came from a single-model extraction",+ "symbol": "regenerated from the corrected pinout" } }, "viewers": {@@ -700,7 +719,7 @@ "viewers/symbol.html", "viewers/footprint.html" ],- "visibility": "public",- "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",- "org": "adom"-}+ "visibility": {+ "public": true+ }+}