main
History Download
Ray Publish 0.1.0 0f39ca1

STM32F429VET6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

STM32F429VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V-tolerant (FT) I/O port E pin 2 with alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23 and EVENTOUT.
2 PE3 bidirectional 5 V-tolerant (FT) I/O port E pin 3 with alternate functions TRACED0, SAI1_SD_B, FMC_A19 and EVENTOUT.
3 PE4 bidirectional 5 V-tolerant (FT) I/O port E pin 4 with alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0 and EVENTOUT.
4 PE5 bidirectional 5 V-tolerant (FT) I/O port E pin 5 with alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0 and EVENTOUT.
5 PE6 bidirectional 5 V-tolerant (FT) I/O port E pin 6 with alternate functions TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1 and EVENTOUT.
6 VBAT power_in Backup supply (1.65 to 3.6 V) for the RTC, 32 kHz oscillator, backup registers and backup SRAM when VDD is absent.
7 PC13 bidirectional FT I/O powered through the backup power switch (output limited to 3 mA, max 2 MHz with 30 pF load, cannot source LEDs); function EVENTOUT, other function TAMP_1.
8 PC14-OSC32_IN bidirectional FT I/O (PC14) or 32 kHz LSE oscillator input (OSC32_IN), powered by the backup switch with a 3 mA, 2 MHz, 30 pF output limit.
9 PC15-OSC32_OUT bidirectional FT I/O (PC15) or 32 kHz LSE oscillator output (OSC32_OUT), powered by the backup switch with a 3 mA, 2 MHz, 30 pF output limit.
10 VSS power_in Digital ground supply pin; all VSS pins must be connected to external ground.
11 VDD power_in Digital supply pin, 1.7 to 3.6 V, for I/O and the internal regulator.
12 PH0-OSC_IN bidirectional FT I/O (PH0) or HSE 4-26 MHz oscillator input (OSC_IN) with EVENTOUT alternate function.
13 PH1-OSC_OUT bidirectional FT I/O (PH1) or HSE 4-26 MHz oscillator output (OSC_OUT) with EVENTOUT alternate function.
14 NRST bidirectional Bidirectional reset pin with weak pull-up (30 to 50 kΩ), input filters pulses up to 100 ns, and generates a reset pulse of at least 20 µs from internal sources.
15 PC0 bidirectional FT I/O port C pin 0 with OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT and analog input ADC123_IN10.
16 PC1 bidirectional FT I/O port C pin 1 with ETH_MDC, EVENTOUT and analog input ADC123_IN11.
17 PC2 bidirectional FT I/O port C pin 2 with SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT and analog input ADC123_IN12.
18 PC3 bidirectional FT I/O port C pin 3 with SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT and analog input ADC123_IN13.
19 VDD power_in Digital supply pin, 1.7 to 3.6 V.
20 VSSA power_in Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS.
21 VREF+ power_in ADC/DAC positive reference voltage, 1.7 to 3.6 V, with VDDA - VREF+ < 1.2 V.
22 VDDA power_in Analog supply for ADC, DAC, reset block, RC and PLL, 1.7 to 3.6 V (2.4 to 3.6 V for 2.4 Msps ADC), must equal VDD.
23 PA0-WKUP bidirectional FT I/O port A pin 0 with TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS, ADC123_IN0 and WKUP wake-up from Standby.
24 PA1 bidirectional FT I/O port A pin 1 with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/RMII_REF_CLK and analog input ADC123_IN1.
25 PA2 bidirectional FT I/O port A pin 2 with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO and analog input ADC123_IN2.
26 PA3 bidirectional FT I/O port A pin 3 with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5 and analog input ADC123_IN3.
27 VSS power_in Digital ground supply pin.
28 VDD power_in Digital supply pin, 1.7 to 3.6 V.
29 PA4 bidirectional 3.3 V-tolerant TTa I/O connected to ADC with SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, ADC12_IN4 and DAC_OUT1.
30 PA5 bidirectional 3.3 V-tolerant TTa I/O connected to ADC with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, ADC12_IN5 and DAC_OUT2.
31 PA6 bidirectional FT I/O port A pin 6 with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2 and analog input ADC12_IN6.
32 PA7 bidirectional FT I/O port A pin 7 with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/RMII_CRS_DV and analog input ADC12_IN7.
33 PC4 bidirectional FT I/O port C pin 4 with ETH_MII_RXD0/RMII_RXD0, EVENTOUT and analog input ADC12_IN14.
34 PC5 bidirectional FT I/O port C pin 5 with ETH_MII_RXD1/RMII_RXD1, EVENTOUT and analog input ADC12_IN15.
35 PB0 bidirectional FT I/O port B pin 0 with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2 and analog input ADC12_IN8.
36 PB1 bidirectional FT I/O port B pin 1 with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3 and analog input ADC12_IN9.
37 PB2-BOOT1 bidirectional FT I/O port B pin 2 that serves as BOOT1 boot mode selection, with EVENTOUT alternate function.
38 PE7 bidirectional FT I/O port E pin 7 with TIM1_ETR, UART7_Rx, FMC_D4 and EVENTOUT.
39 PE8 bidirectional FT I/O port E pin 8 with TIM1_CH1N, UART7_Tx, FMC_D5 and EVENTOUT.
40 PE9 bidirectional FT I/O port E pin 9 with TIM1_CH1, FMC_D6 and EVENTOUT.
41 PE10 bidirectional FT I/O port E pin 10 with TIM1_CH2N, FMC_D7 and EVENTOUT.
42 PE11 bidirectional FT I/O port E pin 11 with TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3 and EVENTOUT.
43 PE12 bidirectional FT I/O port E pin 12 with TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4 and EVENTOUT.
44 PE13 bidirectional FT I/O port E pin 13 with TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE and EVENTOUT.
45 PE14 bidirectional FT I/O port E pin 14 with TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK and EVENTOUT.
46 PE15 bidirectional FT I/O port E pin 15 with TIM1_BKIN, FMC_D12, LCD_R7 and EVENTOUT.
47 PB10 bidirectional FT I/O port B pin 10 with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4 and EVENTOUT.
48 PB11 bidirectional FT I/O port B pin 11 with TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/RMII_TX_EN, LCD_G5 and EVENTOUT.
49 VCAP_1 passive Internal 1.2 V regulator output connection requiring a 2.2 µF ceramic capacitor with ESR below 2 Ω to ground.
50 VDD power_in Digital supply pin, 1.7 to 3.6 V.
51 PB12 bidirectional FT I/O port B pin 12 with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/RMII_TXD0, OTG_HS_ID and EVENTOUT.
52 PB13 bidirectional FT I/O port B pin 13 with TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/RMII_TXD1 and OTG_HS_VBUS.
53 PB14 bidirectional FT I/O port B pin 14 with TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1 and OTG_HS_DM.
54 PB15 bidirectional FT I/O port B pin 15 with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2 and OTG_HS_DP.
55 PD8 bidirectional FT I/O port D pin 8 with USART3_TX, FMC_D13 and EVENTOUT.
56 PD9 bidirectional FT I/O port D pin 9 with USART3_RX, FMC_D14 and EVENTOUT.
57 PD10 bidirectional FT I/O port D pin 10 with USART3_CK, FMC_D15, LCD_B3 and EVENTOUT.
58 PD11 bidirectional FT I/O port D pin 11 with USART3_CTS, FMC_A16 and EVENTOUT.
59 PD12 bidirectional FT I/O port D pin 12 with TIM4_CH1, USART3_RTS, FMC_A17 and EVENTOUT.
60 PD13 bidirectional FT I/O port D pin 13 with TIM4_CH2, FMC_A18 and EVENTOUT.
61 PD14 bidirectional FT I/O port D pin 14 with TIM4_CH3, FMC_D0 and EVENTOUT.
62 PD15 bidirectional FT I/O port D pin 15 with TIM4_CH4, FMC_D1 and EVENTOUT.
63 PC6 bidirectional FT I/O port C pin 6 with TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC and EVENTOUT.
64 PC7 bidirectional FT I/O port C pin 7 with TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6 and EVENTOUT.
65 PC8 bidirectional FT I/O port C pin 8 with TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2 and EVENTOUT.
66 PC9 bidirectional FT I/O port C pin 9 with MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3 and EVENTOUT.
67 PA8 bidirectional FT I/O port A pin 8 with MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6 and EVENTOUT.
68 PA9 bidirectional FT I/O port A pin 9 with TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0, EVENTOUT and OTG_FS_VBUS.
69 PA10 bidirectional FT I/O port A pin 10 with TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1 and EVENTOUT.
70 PA11 bidirectional FT I/O port A pin 11 with TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM and EVENTOUT.
71 PA12 bidirectional FT I/O port A pin 12 with TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP and EVENTOUT.
72 PA13 (JTMS-SWDIO) bidirectional FT I/O that is JTMS-SWDIO debug pin after reset, with EVENTOUT alternate function.
73 VCAP_2 passive Internal 1.2 V regulator output connection requiring a 2.2 µF ceramic capacitor with ESR below 2 Ω to ground.
74 VSS power_in Digital ground supply pin.
75 VDD power_in Digital supply pin, 1.7 to 3.6 V.
76 PA14 (JTCK-SWCLK) bidirectional FT I/O that is JTCK-SWCLK debug pin after reset, with EVENTOUT alternate function.
77 PA15 (JTDI) bidirectional FT I/O that is JTDI after reset, with TIM2_CH1/ETR, SPI1_NSS, SPI3_NSS/I2S3_WS and EVENTOUT.
78 PC10 bidirectional FT I/O port C pin 10 with SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2 and EVENTOUT.
79 PC11 bidirectional FT I/O port C pin 11 with I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4 and EVENTOUT.
80 PC12 bidirectional FT I/O port C pin 12 with SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9 and EVENTOUT.
81 PD0 bidirectional FT I/O port D pin 0 with CAN1_RX, FMC_D2 and EVENTOUT.
82 PD1 bidirectional FT I/O port D pin 1 with CAN1_TX, FMC_D3 and EVENTOUT.
83 PD2 bidirectional FT I/O port D pin 2 with TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11 and EVENTOUT.
84 PD3 bidirectional FT I/O port D pin 3 with SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7 and EVENTOUT.
85 PD4 bidirectional FT I/O port D pin 4 with USART2_RTS, FMC_NOE and EVENTOUT.
86 PD5 bidirectional FT I/O port D pin 5 with USART2_TX, FMC_NWE and EVENTOUT.
87 PD6 bidirectional FT I/O port D pin 6 with SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2 and EVENTOUT.
88 PD7 bidirectional FT I/O port D pin 7 with USART2_CK, FMC_NE1/FMC_NCE2 and EVENTOUT.
89 PB3 (JTDO/TRACESWO) bidirectional FT I/O that is JTDO/TRACESWO after reset, with TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK and EVENTOUT.
90 PB4 (NJTRST) bidirectional FT I/O that is NJTRST after reset, with TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD and EVENTOUT.
91 PB5 bidirectional FT I/O port B pin 5 with TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10 and EVENTOUT.
92 PB6 bidirectional FT I/O port B pin 6 with TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5 and EVENTOUT.
93 PB7 bidirectional FT I/O port B pin 7 with TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC and EVENTOUT.
94 BOOT0 input Dedicated boot mode selection pin that tolerates up to 9 V input; also VPP for Flash programming (7 to 9 V).
95 PB8 bidirectional FT I/O port B pin 8 with TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6 and EVENTOUT.
96 PB9 bidirectional FT I/O port B pin 9 with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7 and EVENTOUT.
97 PE0 bidirectional FT I/O port E pin 0 with TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2 and EVENTOUT.
98 PE1 bidirectional FT I/O port E pin 1 with UART8_Tx, FMC_NBL1, DCMI_D3 and EVENTOUT.
99 VSS power_in Digital ground supply pin.
100 VDD power_in Digital supply pin, 1.7 to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Standard operating voltage VDD 1.7 3.6 V Standard operating voltage 94
Analog operating voltage, ADC limited to 1.2 Msps VDDA 1.7 2.4 V ADC limited to 1.2 Msps; must be equipotential with VDD 94
Analog operating voltage, ADC limited to 2.4 Msps VDDA 2.4 3.6 V ADC limited to 2.4 Msps 94
Backup operating voltage VBAT 1.65 3.6 V Backup operating voltage 94
Input voltage on FT and RST pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 94
Input voltage on BOOT0 pin VIN 0 9 V BOOT0 pin 94
Ambient temperature, suffix 6, maximum power dissipation TA -40 85 °C Suffix 6 version, maximum power dissipation 94
Ambient temperature, suffix 6, low power dissipation TA -40 105 °C Suffix 6 version, low power dissipation 94
Junction temperature range, suffix 6 TJ -40 105 °C Suffix 6 version 95
Supply voltage VDD-VSS (external) VDD-VSS -0.3 4 V External main supply voltage including VDDA, VDD and VBAT 91
Input voltage on BOOT0 pin (absolute) VIN 0 9 V BOOT0 pin 91
Voltage variation between different VDD pins ΔVDDx 50 mV Between different VDD power pins 91
Total current into all VDD_x supply lines ΣIVDD 270 mA Source current, all VDD_x lines 92
Current into each VDD_x supply line IVDD 100 mA Source current, each VDD_x line 92
Output sink/source current, any I/O and control pin IIO -25 25 mA Any I/O and control pin, sink (+) and source (-) 92
Total output current, all I/O and control pins ΣIIO -120 120 mA All I/O and control pins, sink and source 92
Storage temperature range TSTG -65 150 °C Storage temperature range 92
Maximum junction temperature TJ 125 °C Maximum junction temperature 92
Internal regulator output voltage, regulator ON, scale 3 V12 1.08 1.14 1.2 V Regulator ON, power scale 3 (VOS=0x01), 120 MHz HCLK max 94
HSE oscillator frequency fOSC_IN 4 26 MHz Crystal/ceramic resonator oscillator 118
HSI factory calibration accuracy, TA -40 to 105 °C ACCHSI -8 4.5 % Factory calibrated, TA = -40 to 105 °C 120
HSI factory calibration accuracy, TA 25 °C ACCHSI -1 1 % Factory calibrated, TA = 25 °C 120
HSI frequency fHSI 16 MHz 120
LSI frequency fLSI 17 32 47 kHz Characterized, not production tested 120
POR/PDR reset threshold, falling edge VPOR/PDR 1.6 1.68 1.76 V Falling edge 97
Internal reference voltage VREFINT 1.18 1.21 1.24 V -40 °C < TA < +105 °C 159
Temperature sensor linearity TL -2 2 °C VSENSE linearity versus temperature (±1 typ) 159
Temperature sensor average slope Avg_Slope 2.5 mV/°C 159
NRST weak pull-up equivalent resistor RPU 30 40 50 kΩ VIN = VSS 136
Output low level, CMOS port VOL 0.4 V IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V 134
Flash endurance NEND 10 kcycles TA = -40 to +85 °C (suffix 6) 128
Flash data retention at 85 °C tRET 30 years TA = 85 °C after 1000 erase/write cycles 128

CAD (KiCad official)

  • Symbol: STM32F429VET6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32f429vet6-etched.step / stm32f429vet6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f429vet6.step / stm32f429vet6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (226 pp, sha256 9eccb942b0df757c, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF